* Allow issuance of wildcard via glob match
From Vault v1.8.0 onwards, we would incorrectly disallow issuance of a
wildcard certificate when allow_glob_domain was enabled with a
multi-part glob domain in allowed_domains (such as *.*.foo) when
attempting to issue a wildcard for a subdomain (such as *.bar.foo).
This fixes that by reverting an errant change in the case insensitivity
patch. Here, when validating against a very powerful glob construct, we
leave the wildcard prefix (*.) from the raw common_name element, to
allow multi-part globs to match wildcard entries.
It is important to note that "sanitizedName" is an incorrect variable
naming here. Wildcard parsing (per RFC 6125 which supercedes RFC 2818)
must be in the left-most segment of the domain, but we lack validation
to ensure no internal wildcards exist. Additionally per item 3 of
section 6.4.3 of RFC 6125, wildcards MAY be internal to a domain
segment, in which case sanitizedName again leaves the wildcard in place.
Resolves: #13530
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove duplicate email address check
As pointed out by Steven Clark (author of the removed conditional in
70012cd865b3dcdab376dba0c0e0abc88c48f508), this is duplicate from the
now-reintroduced comparison against name (versus the erroneous
sanitizedName at the time of his commit).
This is a reversion of the changes to builtin/logical/pki/cert_util.go,
but keeping the additional valuable test cases.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add multi-dimensional PKI role issuance tests
This commit introduces multi-dimensional testing of PKI secrets engine's
role-based certificate issuance with the intent of preventing future
regressions.
Here, dimensions of testing include:
- AllowedDomains to decide which domains are approved for issuance,
- AllowBareDomains to decide if raw entries of AllowedDomains are
permitted,
- AllowGlobDomains to decide if glob patterns in AllowedDomains are
parsed,
- AllowSubdomains to decide if subdomains of AllowedDomains are
permitted,
- AllowLocalhost to decide if localhost identifiers are permitted, and
- CommonName of the certificate to request.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* agent/azure: adds ability to use specific user assigned managed identity for auto auth
* add changelog
* change wording in error and docs
* Update website/content/docs/agent/autoauth/methods/azure.mdx
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
* Update website/content/docs/agent/autoauth/methods/azure.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* docs formatting
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Various changes to try to ensure that fewer goroutines survive after a test completes:
* add Core.ShutdownWait that doesn't return until shutdown is done
* create the usedCodes cache on seal and nil it out on pre-seal so that the finalizer kills the janitor goroutine
* stop seal health checks on seal rather than wait for them to discover the active context is done
* make sure all lease-loading goroutines are done before returning from restore
* make uniquePoliciesGc discover closed quitCh immediately instead of only when the ticker fires
* make sure all loading goroutines are done before returning from loadEntities, loadCachedEntitiesOfLocalAliases
* Add checks for other error types within the PKI plugin
- The PKI plugin assumes the code it is calling always returns an error
of type errutil.UserError or errutil.InternalError. While I believe
so far this is still true, it would be easy to add a code path that
just returns a generic error and we would completely ignore it.
- This was found within some managed key testing where I forgot to wrap
an error within one of the expected types
* Add changelog
* Explicitly call out SSH algorithm_signer default
Related: #11608
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use rsa-sha2-256 as the default SSH CA hash algo
As mentioned in the OpenSSH 8.2 release notes, OpenSSH will no longer be
accepting ssh-rsa signatures by default as these use the insecure SHA-1
algorithm.
For roles in which an explicit signature type wasn't specified, we
should change the default from SHA-1 to SHA-256 for security and
compatibility with modern OpenSSH releases.
See also: https://www.openssh.com/txt/release-8.2
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update docs mentioning new algorithm change
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix missing parenthesis, clarify new default value
* Add to side bar
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This patch adds a new /agent/v1/metrics that will return metrics on the
running Vault agent. Configuration is done using the same telemetry
stanza as the Vault server. For now default runtime metrics are
returned with a few additional ones specific to the agent:
- `vault.agent.auth.failure` and `vault.agent.auth.success` to monitor
the correct behavior of the auto auth mechanism
- `vault.agent.proxy.success`, `vault.agent.proxy.client_error` and
`vault.agent.proxy.error` to check the connection with the Vault server
- `vault.agent.cache.hit` and `vault.agent.cache.miss` to monitor the
cache
Closes https://github.com/hashicorp/vault/issues/8649
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
* adds development workflow to mirage config
* adds mirage handler and factory for mfa workflow
* adds mfa handling to auth service and cluster adapter
* moves auth success logic from form to controller
* adds mfa form component
* shows delayed auth message for all methods
* adds new code delay to mfa form
* adds error views
* fixes merge conflict
* adds integration tests for mfa-form component
* fixes auth tests
* updates mfa response handling to align with backend
* updates mfa-form to handle multiple methods and constraints
* adds noDefault arg to Select component
* updates mirage mfa handler to align with backend and adds generator for various mfa scenarios
* adds tests
* flaky test fix attempt
* reverts test fix attempt
* adds changelog entry
* updates comments for todo items
* removes faker from mfa mirage factory and handler
* adds number to word helper
* fixes tests
* Login MFA
* ENT OSS segragation (#14088)
* Delete method id if not used in an MFA enforcement config (#14063)
* Delete an MFA methodID only if it is not used by an MFA enforcement config
* Fixing a bug: mfa/validate is an unauthenticated path, and goes through the handleLoginRequest path
* adding use_passcode field to DUO config (#14059)
* add changelog
* preventing replay attack on MFA passcodes (#14056)
* preventing replay attack on MFA passcodes
* using %w instead of %s for error
* Improve CLI command for login mfa (#14106)
CLI prints a warning message indicating the login request needs to get validated
* adding the validity period of a passcode to error messages (#14115)
* PR feedback
* duo to handle preventing passcode reuse
Co-authored-by: hghaf099 <83242695+hghaf099@users.noreply.github.com>
Co-authored-by: hamid ghaf <hamid@hashicorp.com>
* Allow specifying multiple allowed SSH key lengths
In the ssh secrets engine, only a single allowed key length was allowed
for each algorithm type. However, many algorithms have multiple safe
values (such as RSA and ECDSA); allowing a single role to have multiple
values for a single algorithm is thus helpful.
On creation or update, roles can now specify multiple types using a list
or comma separated string of allowed values:
allowed_user_key_lengths: map[string][]int{"rsa": []int{2048, 4096}}
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Break out ssh upgrade logic into separate function
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update parseutil for optional lists of integers
go get -u github.com/hashicorp/go-secure-stdlib/parseutil
go mod tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Simplify parse logic using new parseutil
The newly introduced parseutil.ParseIntSlice handles the more
complicated optional int-like slice logic for us.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* port SSCT OSS
* port header hmac key to ent and generate token proto without make command
* remove extra nil check in request handling
* add changelog
* add comment to router.go
* change test var to use length constants
* remove local index is 0 check and extra defer which can be removed after use of ExternalID
* adds development workflow to mirage config
* adds mirage handler and factory for mfa workflow
* adds mfa handling to auth service and cluster adapter
* moves auth success logic from form to controller
* adds mfa form component
* shows delayed auth message for all methods
* adds new code delay to mfa form
* adds error views
* fixes merge conflict
* adds integration tests for mfa-form component
* fixes auth tests
* updates mfa response handling to align with backend
* updates mfa-form to handle multiple methods and constraints
* adds noDefault arg to Select component
* updates mirage mfa handler to align with backend and adds generator for various mfa scenarios
* adds tests
* flaky test fix attempt
* reverts test fix attempt
* adds changelog entry
* updates comments for todo items
* removes faker from mfa mirage factory and handler
* adds number to word helper
* fixes tests
* Revert "Merge branch 'main' into ui/mfa"
This reverts commit 8ee6a6aaa1b6c9ec16b985c10d91c3806819ec40, reversing
changes made to 2428dd6cca07bb41cda3f453619646ca3a88bfd0.
* format-ttl helper fix from main
* feat: DB plugin multiplexing (#13734)
* WIP: start from main and get a plugin runner from core
* move MultiplexedClient map to plugin catalog
- call sys.NewPluginClient from PluginFactory
- updates to getPluginClient
- thread through isMetadataMode
* use go-plugin ClientProtocol interface
- call sys.NewPluginClient from dbplugin.NewPluginClient
* move PluginSets to dbplugin package
- export dbplugin HandshakeConfig
- small refactor of PluginCatalog.getPluginClient
* add removeMultiplexedClient; clean up on Close()
- call client.Kill from plugin catalog
- set rpcClient when muxed client exists
* add ID to dbplugin.DatabasePluginClient struct
* only create one plugin process per plugin type
* update NewPluginClient to return connection ID to sdk
- wrap grpc.ClientConn so we can inject the ID into context
- get ID from context on grpc server
* add v6 multiplexing protocol version
* WIP: backwards compat for db plugins
* Ensure locking on plugin catalog access
- Create public GetPluginClient method for plugin catalog
- rename postgres db plugin
* use the New constructor for db plugins
* grpc server: use write lock for Close and rlock for CRUD
* cleanup MultiplexedClients on Close
* remove TODO
* fix multiplexing regression with grpc server connection
* cleanup grpc server instances on close
* embed ClientProtocol in Multiplexer interface
* use PluginClientConfig arg to make NewPluginClient plugin type agnostic
* create a new plugin process for non-muxed plugins
* feat: plugin multiplexing: handle plugin client cleanup (#13896)
* use closure for plugin client cleanup
* log and return errors; add comments
* move rpcClient wrapping to core for ID injection
* refactor core plugin client and sdk
* remove unused ID method
* refactor and only wrap clientConn on multiplexed plugins
* rename structs and do not export types
* Slight refactor of system view interface
* Revert "Slight refactor of system view interface"
This reverts commit 73d420e5cd2f0415e000c5a9284ea72a58016dd6.
* Revert "Revert "Slight refactor of system view interface""
This reverts commit f75527008a1db06d04a23e04c3059674be8adb5f.
* only provide pluginRunner arg to the internal newPluginClient method
* embed ClientProtocol in pluginClient and name logger
* Add back MLock support
* remove enableMlock arg from setupPluginCatalog
* rename plugin util interface to PluginClient
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
* feature: multiplexing: fix unit tests (#14007)
* fix grpc_server tests and add coverage
* update run_config tests
* add happy path test case for grpc_server ID from context
* update test helpers
* feat: multiplexing: handle v5 plugin compiled with new sdk
* add mux supported flag and increase test coverage
* set multiplexingSupport field in plugin server
* remove multiplexingSupport field in sdk
* revert postgres to non-multiplexed
* add comments on grpc server fields
* use pointer receiver on grpc server methods
* add changelog
* use pointer for grpcserver instance
* Use a gRPC server to determine if a plugin should be multiplexed
* Apply suggestions from code review
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* add lock to removePluginClient
* add multiplexingSupport field to externalPlugin struct
* do not send nil to grpc MultiplexingSupport
* check err before logging
* handle locking scenario for cleanupFunc
* allow ServeConfigMultiplex to dispense v5 plugin
* reposition structs, add err check and comments
* add comment on locking for cleanupExternalPlugin
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Add generation support for other SSH CA key types
This adds two new arguments to config/ca, mirroring the values of PKI
secrets engine but tailored towards SSH mounts. Key types are specified
as x/crypto/ssh KeyAlgo identifiers (e.g., ssh-rsa or ssh-ed25519)
and respect current defaults (ssh-rsa/4096). Key bits defaults to 0,
which for ssh-rsa then takes a value of 4096.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on key_type, key_bits for ssh/config/ca
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* store version history as utc; add self-heal logic
* add sys/version-history endpoint
* change version history from GET to LIST, require auth
* add "vault version-history" CLI command
* add vault-version CLI error message for version string parsing
* adding version-history API and CLI docs
* add changelog entry
* some version-history command fixes
* remove extraneous cmd args
* fix version-history command help text
* specify in docs that endpoint was added in 1.10.0
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* enforce UTC within storeVersionTimestamp directly
* fix improper use of %w in logger.Warn
* remove extra err check and erroneous return from loadVersionTimestamps
* add >= 1.10.0 warning to version-history cmd
* move sys/version-history tests
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Add format-ttl helper
* Add autoRotateInterval to model and serializer for transit key
* Add goSafeTimeString to object returned from TtlPicker2 component
* Add auto rotate interval to transit key components
* clean up unit calculator on ttl-picker, with tests
* Fix tests, cleanup
* Add changelog
* Allow all other_sans in sign-intermediate and sign-verbatim
/sign-verbatim and /sign-intermediate are more dangerous endpoints in
that they (usually) do not have an associated role. In this case, a
permissive role is constructed during execution of these tests. However,
the AllowedOtherSANs field was missing from this, prohibiting its use
when issuing certificates.
Resolves: #13157
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add duration/count metrics to PKI issue and revoke flows
* docs, changelog
* tidy
* last tidy
* remove err
* Update callsites
* Simple returns
* Handle the fact that test cases don't have namespaces
* Add mount point to the request
* fmt
* Handle empty mount point, and add it to unit tests
* improvement
* Turns out sign-verbatim is tricky, it can take a role but doesn't have to
* Get around the field schema problem
* Use application/pem-certificate-chain for PEMs
As mentioned in #10948, it appears we're incorrectly using the
`application/pkix-cert` media type for PEM blobs, when
`application/x-pem-file` is more appropriate. Per RFC 5280 Section
4.2.1.13, `application/pkix-crl` is only appropriate when the CRL is in
DER form. Likewise, Section 4.2.2.1 states that `application/pkix-cert`
is only applicable when a single DER certificate is used.
Per recommendation in RFC 8555 ("ACME"), Section 7.4.2 and 9.1, we use
the newer `application/pem-certificate-chain` media type for
certificates. However, this is not applicable for CRLs, so we use fall
back to `application/x-pem-file` for these. Notably, no official IETF
source is present for the latter. On the OpenSSL PKI tutorial
(https://pki-tutorial.readthedocs.io/en/latest/mime.html), this type is
cited as coming from S/MIME's predecessor, PEM, but neither of the main
PEM RFCs (RFC 934, 1421, 1422, 1423, or 1424) mention this type.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* updates regex-validator component to optionally show pattern input and adds capture groups support
* adds form-field-label component
* adds autocomplete-input component
* updates kv-object-editor component to yield block for value and glimmerizes
* updates transform template model
* adds transform-advanced-templating component
* updates form-field with child component changes
* updates transform template serializer to handle differences in regex named capture groups
* fixes regex-validator test
* adds changelog entry
* updates for pr review feedback
* reverts kv-object-editor guidFor removal
* Include full chain in /cert/ca_chain response
This allows callers to get the full chain (including issuing
certificates) from a call to /cert/ca_chain. Previously, most endpoints
(including during issuance) do not include the root authority, requiring
an explicit call to /cert/ca to fetch. This allows full chains to be
constructed without without needing multiple calls to the API.
Resolves: #13489
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case for full CA issuance
We test three main scenarios:
1. A root-only CA's `/cert/ca_chain`'s `.data.ca_chain` field should
contain only the root,
2. An intermediate CA (with root provide) should contain both the root
and the intermediate.
3. An external (e.g., `/config/ca`-provided) CA with both root and
intermediate should contain both certs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation for new ca_chain field
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about where to find the entire chain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add check for OIDC provider to permit a non-exact redirect URI from OIDC client if it is the IPv4 or IPv6 loopback address.
* Update changelog/13871.txt
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* Update redirectURI check to match that for the OIDC auth method.
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* [api] Add LDAP auth method
This commit adds LDAP to the available Vault API auth methods.
* Add changelog entry for PR 13841
* Obtain password for LDAPAuth from File/EnvVar
* Fix name of package in error message
* Switch parse-pki-cert from node-forge to PKI.js
This replaces the implementation of parse-pki-cert to use PKI.js rather
than node-forge for two reasons:
- PKI.js uses Web Crypto rather than maintaining a built-in
implementation of several algorithms.
- node-forge presently lacks support for ECDSA and Ed25519
certificates.
Related: #13680
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add dependency on PKI.js
$ yarn add -D asn1js pvutils pkijs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove dependency on node-forge
$ yarn remove node-forge
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support Y10K value in notAfter field when signing non-CA certificates
* Add changelog entry for 13736
* Add test for using not_after parameter for non-CA certificates that are being signed
* Fix CA value for test for not_after value when signing non-CA certs
* Address formatting
* Add changelog file
* Revert changelog entry commit f28b54e7b5ad21144c8a2da942d766e64a332caf
Calculate the Subject Key Identifier as suggested in RFC 5280, Section 4.2.1.2
> (1) The keyIdentifier is composed of the 160-bit SHA-1 hash of the
value of the BIT STRING subjectPublicKey (excluding the tag,
length, and number of unused bits).
fixes#11153
* influxdb v1 client has been split into a separate module from the main influxdb
code base. This changes uses the correct client, which also allows us to
get updates and avoids confusing some vulnerability scanners that flagged
previous version incorrectly.
Co-authored-by: Ben Ash <32777270+benashz@users.noreply.github.com>
* check for nil signing key on rotation
* add changelog
* Update nil signing key handling
- bypass setting ExpireAt if signing key is nil in rotate
- return err if singing key is nil in signPayload
* add comment; update error msg on signPayload; refactor UT
* Add support for client certificates to -output-curl-string
I did not write tests for this feature as -output-curl-string was not
already tested and this is a simple change. Because the name of the
certificates would be lost once loaded I added fields to Config to keep
track of them. I did not add a public method for the user to set them
explicitely as I don't think anyone would need this functionnality
outside of the Vault CLI.
Closes https://github.com/hashicorp/vault/issues/13376
* Add changelog
* Add lock in ConfigureTLS
* Fix upndomain bug causing alias name to change
* Fix nil map
* Add changelog
* revert
* Update changelog
* Add test for alias metadata name
* Fix code comment
* Accept both -f and --force in the web terminal
This aligns the behavior of the web terminal with the `vault write ...`
command to make it a bit more user friendly.
* Add changelog
* Use === instead of ==
* Add auto_rotate_interval field to transit key creation path.
* Add auto_rotate_interval field to transit key config update path.
* Implement transit automatic key rotation on an hourly interval.
* Fixes transit key autorotation key listing typo.
* Add unit tests for transit key autorotation.
* Add unit tests for transit key creation with autorotation interval.
* Add unit tests for transit key config update with autorotation interval.
* Document new auto_rotate_interval fields in key creation and key config update endpoints.
* Add changelog for transit key autorotation.
* Wrap individual transit key autorotation in a policy lock.
* Add a safeguard to transit key autorotation to ensure only one execution happens simultaneously.
In doing some testing I found that the listener clusteraddr isn't really used, or at least isn't as important as the top-level clusteraddr setting. As such, go-sockaddr templating needs to be implemented for the top-level `cluster_addr` setting or it's unusable for HA.
Also fix a nil pointer panic I discovered at the same time.
The auth/token/revoke will not error out if the token does not exists, it
always tries to revoke the token and return success to the client whether
or not the token exists. This makes the behavior of
auth/token/revoke-accessor coherent with this and remove the need to
check whether the token still exists.
* auth/kubernetes: support for short-lived tokens
* Uplift new version of Kubernetes auth plugin that does not store the
service account token persistently to Vault storage.
* Update the documentation to recommend local token again when running
Vault inside cluster.
Signed-off-by: Tero Saarni <tero.saarni@est.tech>
* Added changelog entry
Signed-off-by: Tero Saarni <tero.saarni@est.tech>
* clarification to changelog entry, executed go mod tidy
* clarifications and added targeted release version
* go get vault-plugin-secrets-kv@vault-4290-patch-metadata
* add kv metadata patch command
* add changelog entry
* success tests for kv metadata patch flags
* add more kv metadata patch flags tests
* add kv metadata patch cas warning test
* add kv-v2 key metadata patch API docs
* add kv metadata patch to docs
* prevent unintentional field overwriting in kv metadata put cmd
* like create/update ops, prevent patch to paths ending in /
* fix kv metadata patch cmd in docs
* fix flag defaults for kv metadata put
* go get vault-plugin-secrets-kv@vault-4290-patch-metadata
* fix TestKvMetadataPatchCommand_Flags test
* doc fixes
* go get vault-plugin-secrets-kv@master; go mod tidy
* Add a parameter that disables escaping characters in the username or password fields for secrets engines database connections
* Always disallow template variables inside the username or password
* Fix info-table-row not rendering if alwaysRender=false and only block content present
* use defaultFields for form and nonOperationFields for adapter
* WIP: Move info table row template to addon component dir
* Refactor InfoTableRow to glimmer component
* Add changelog
* passthrough attributes, change @data-test-x to data-test-x on InfoTableRow invocations
* auth/cert: Add certificate extensions as metadata
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* Add changelog for #13348
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* Attempt to address a data race issue within identity store
* Testcase TestIdentityStore_LocalAliasInvalidations identified a data race issue.
* This reverts the previous attempt to address the issue from #13093
* Fixed null token panic from 'v1/auth/token/' endpoints and returned proper error response
* added changelog entry for PR #13233
* changed error message from 'bad token' to 'null token'
* rebased off of main
* Revert "changed error message from 'bad token' to 'null token'"
This reverts commit 381ed9b32c5ddd5e47adb1643ef7e46fb768bc76.
* changed 'bad token' error message to 'invalid token' after revert
* remove unnecessary vault-data folder
* Update browserslist
* Add browserslistrc
* ember-cli-update --to 3.26, fix conflicts
* Run codemodes that start with ember-*
* More codemods - before cp*
* More codemods (curly data-test-*)
* WIP ember-basic-dropdown template errors
* updates ember-basic-dropdown and related deps to fix build issues
* updates basic dropdown instances to new version API
* updates more deps -- ember-template-lint is working again
* runs no-implicit-this codemod
* creates and runs no-quoteless-attributes codemod
* runs angle brackets codemod
* updates lint:hbs globs to only touch hbs files
* removes yield only templates
* creates and runs deprecated args transform
* supresses lint error for invokeAction on LinkTo component
* resolves remaining ambiguous path lint errors
* resolves simple-unless lint errors
* adds warnings for deprecated tagName arg on LinkTo components
* adds warnings for remaining curly component invocation
* updates global template lint rules
* resolves remaining template lint errors
* disables some ember specfic lint rules that target pre octane patterns
* js lint fix run
* resolves remaining js lint errors
* fixes test run
* adds npm-run-all dep
* fixes test attribute issues
* fixes console acceptance tests
* fixes tests
* adds yield only wizard/tutorial-active template
* fixes more tests
* attempts to fix more flaky tests
* removes commented out settled in transit test
* updates deprecations workflow and adds initializer to filter by version
* updates flaky policies acl old test
* updates to flaky transit test
* bumps ember deps down to LTS version
* runs linters after main merge
* fixes client count tests after bad merge conflict fixes
* fixes client count history test
* more updates to lint config
* another round of hbs lint fixes after extending stylistic rule
* updates lint-staged commands
* removes indent eslint rule since it seems to break things
* fixes bad attribute in transform-edit-form template
* test fixes
* fixes enterprise tests
* adds changelog
* removes deprecated ember-concurrency-test-waiters dep and adds @ember/test-waiters
* flaky test fix
Co-authored-by: hashishaw <cshaw@hashicorp.com>
* Add allowed_uri_sans_template
Enables identity templating for the allowed_uri_sans field in PKI cert roles.
Implemented as suggested in #8509
* changelog++
* Update docs with URI SAN templating
* github auth: use org id to verify creds
* add check for required org param; add test case
* update UTs
* add nil check for org
* add changelog
* fix typo in ut
* set org ID if it is unset; add more ut coverage
* add optional organization_id
* move client instantiation
* refactor parse URL; add UT for setting org ID
* fix comment in UT
* add nil check
* don't update org name on change; return warning
* refactor verifyCredentials
* error when unable to fetch org ID on config write; add warnings
* fix bug in log message
* update UT and small refactor
* update comments and log msg
* use getter for org ID
* Allow universal default for key_bits
This allows the key_bits field to take a universal default value, 0,
which, depending on key_type, gets adjusted appropriately into a
specific default value (rsa->2048, ec->256, ignored under ed25519).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle universal default key size in certutil
Also move RSA < 2048 error message into certutil directly, instead of in
ca_util/path_roles.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing RSA key sizes to pki/backend_test.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to returning updated values
When determining the default, don't pass in pointer types, but instead
return the newly updated value.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Re-add fix for ed25519 from #13254
Ed25519 internally specifies a hash length; by changing the default from
256 to 0, we fail validation in ValidateSignatureLength(...) unless we
specify the key algorithm.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support clearing an identity alias' custom_metadata
Previously, an update to an entity alias supported updating the
custom_metadata as long as the update was not empty, which makes it
impossible to clear the metadata values completely.
Fixes:
- empty custom_metadata parameters are honoured on entity alias update
- update related tests
- drop dependency on mapstructure
- reformat with gofumpt
* VAULT-1564 report in-flight requests
* adding a changelog
* Changing some variable names and fixing comments
* minor style change
* adding unauthenticated support for in-flight-req
* adding documentation for the listener.profiling stanza
* adding an atomic counter for the inflight requests
addressing comments
* addressing comments
* logging completed requests
* fixing a test
* providing log_requests_info as a config option to determine at which level requests should be logged
* removing a member and a method from the StatusHeaderResponseWriter struct
* adding api docks
* revert changes in NewHTTPResponseWriter
* Fix logging invalid log_requests_info value
* Addressing comments
* Fixing a test
* use an tomic value for logRequestsInfo, and moving the CreateClientID function to Core
* fixing go.sum
* minor refactoring
* protecting InFlightRequests from data race
* another try on fixing a data race
* another try to fix a data race
* addressing comments
* fixing couple of tests
* changing log_requests_info to log_requests_level
* minor style change
* fixing a test
* removing the lock in InFlightRequests
* use single-argument form for interface assertion
* adding doc for the new configuration paramter
* adding the new doc to the nav data file
* minor fix
* Adding support for SHA3 in the transit backend.
* Adds SHA-3 tests for transit sign/verify path. Adds SHA-3 tests for logical system tools path hash functionality. Updates documentation to include SHA-3 algorithms in system tools path hashing.
* Adds changelog entry.
Co-authored-by: robison jacka <robison@packetized.io>
* adds ember-flight-icons dependecy
* adds inline-json-import babel plugin
* adds flight icon styling
* updates Icon component to support flight icons
* updates Icon component usages to new api and updates name values to flight icon set when available
* fixes tests
* updates icon story with flight mappings and fixes issue with flight icons not rendering in storybook
* adds changelog
* fixes typo in sign action glyph name in transit-key model
* adds comments to icon-map
* updates Icon component to use only supported flight icon sizes
* adds icon transform codemod
* updates icon transform formatting to handle edge case
* runs icon transform on templates
* updates Icon usage in toolbar-filter md and story
* updates tests
* See what it looks like to replace "master key" with "root key". There are two places that would require more challenging code changes: the storage path `core/master`, and its contents (the JSON-serialized EncodedKeyringtructure.)
* Restore accidentally deleted line
* Add changelog
* Update root->recovery
* Fix test
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* staying with jsondiff
* routing setup
* send compare against data to component after using new adapater method to return the version data.
* functionality
* fix issue on route transition not calling model hook
* formatting
* update version
* changelog
* glimmerize the json-editor component
* catch up
* passing tracked property from child to parent
* pull out of jsonEditor
* fix issue with message
* icon
* fix some issues with right selection
* changes and convert to component
* integration test
* tests
* fixes
* cleanup
* cleanup 2
* fixes
* fix test by spread attributes
* remove log
* remove
* Add client side pagination to namespaces
* Update namespace list after delete operation
* Added changelog
* Added tests
* Clean up
* Added comment for test
* Try ember run loop
* Run test only in enterprise
* Fixed test
* upgrade aerospike-client-go to v5.2.0
* use strings.Contains to check an error
* add changelog file
* go mod tidy
* go mod tidy
* update the changelog
* revert .gitignore update
* go mod tidy
* return pkcs8 format for ed25519 curve
convertRespToPKCS8 does not recognize the ed25519 key. Changes
to recognize ed25519 key and return its PKCS8 format
* converts secret-v2-version model to native class -- fixes issues with cached values for deleted prop
* adds changelog entry
* adds disabled state to ToolbarLink component and disables create new version action when users cannot read metadata
* updates secret-edit acceptance test
* skip hash bits verification for ed25519 #13253
The default value or *hashBits is 0 and will fail
at ValidateSignatureLength for ed25519. ed25519
specifies its own hash, so avoid hashBits validation for
ed25519 curve.
* Unify NewHTTPResponseWriter ant NewStatusHeaderResponseWriter to fix ResponseWriter issues
* adding changelog
* removing unnecessary function from the WrappingResponseWriter interface
* changing logical requests responseWriter type
* reverting change to HTTPResponseWriter
* add catch for node-forge error handling
* update comment
* adds changelog
* alphabetize attrs and add canParse attr
* show alert banner if unable to parse metadata
* add test to check info banner renders
* fixes issue with ttl picker not initially enabling in form field component
* adds changelog entry
* updates test
* updates initial ttl toggle state for default 0s value
