* nsd: block on removal of services
This PR uses a WaitGroup to ensure workload removals are complete
before returning from ServiceRegistrationHandler.RemoveWorkload of
the nomad service provider. The de-registration of individual services
still occurs asynchrously, but we must block on the parent removal
call so that we do not race with further operations on the same set
of services - e.g. in the case of a task restart where we de-register
and then re-register the services in quick succession.
Fixes#15032
* nsd: add e2e test for initial failing check and restart
Disallowing per_alloc for host volumes in some cases makes life of a nomad user much harder.
When we rely on the NOMAD_ALLOC_INDEX for any configuration that needs to be re-used across
restarts we need to make sure allocation placement is consistent. With CSI volumes we can
use the `per_alloc` feature but for some reason this is explicitly disabled for host volumes.
Ensure host volumes understand the concept of per_alloc
This changeset configures the RPC rate metrics that were added in #15515 to all
the RPCs that support authenticated HTTP API requests. These endpoints already
configured with pre-forwarding authentication in #15870, and a handful of others
were done already as part of the proof-of-concept work. So this changeset is
entirely copy-and-pasting one method call into a whole mess of handlers.
Upcoming PRs will wire up pre-forwarding auth and rate metrics for the remaining
set of RPCs that have no API consumers or aren't authenticated, in smaller
chunks that can be more thoughtfully reviewed.
When a Nomad client that is running an allocation with
`max_client_disconnect` set misses a heartbeat the Nomad server will
update its status to `disconnected`.
Upon reconnecting, the client will make three main RPC calls:
- `Node.UpdateStatus` is used to set the client status to `ready`.
- `Node.UpdateAlloc` is used to update the client-side information about
allocations, such as their `ClientStatus`, task states etc.
- `Node.Register` is used to upsert the entire node information,
including its status.
These calls are made concurrently and are also running in parallel with
the scheduler. Depending on the order they run the scheduler may end up
with incomplete data when reconciling allocations.
For example, a client disconnects and its replacement allocation cannot
be placed anywhere else, so there's a pending eval waiting for
resources.
When this client comes back the order of events may be:
1. Client calls `Node.UpdateStatus` and is now `ready`.
2. Scheduler reconciles allocations and places the replacement alloc to
the client. The client is now assigned two allocations: the original
alloc that is still `unknown` and the replacement that is `pending`.
3. Client calls `Node.UpdateAlloc` and updates the original alloc to
`running`.
4. Scheduler notices too many allocs and stops the replacement.
This creates unnecessary placements or, in a different order of events,
may leave the job without any allocations running until the whole state
is updated and reconciled.
To avoid problems like this clients must update _all_ of its relevant
information before they can be considered `ready` and available for
scheduling.
To achieve this goal the RPC endpoints mentioned above have been
modified to enforce strict steps for nodes reconnecting:
- `Node.Register` does not set the client status anymore.
- `Node.UpdateStatus` sets the reconnecting client to the `initializing`
status until it successfully calls `Node.UpdateAlloc`.
These changes are done server-side to avoid the need of additional
coordination between clients and servers. Clients are kept oblivious of
these changes and will keep making these calls as they normally would.
The verification of whether allocations have been updates is done by
storing and comparing the Raft index of the last time the client missed
a heartbeat and the last time it updated its allocations.
This changeset allows Workload Identities to authenticate to all the RPCs that
support HTTP API endpoints, for use with PR #15864.
* Extends the work done for pre-forwarding authentication to all RPCs that
support a HTTP API endpoint.
* Consolidates the auth helpers used by the CSI, Service Registration, and Node
endpoints that are currently used to support both tokens and client secrets.
Intentionally excluded from this changeset:
* The Variables endpoint still has custom handling because of the implicit
policies. Ideally we'll figure out an efficient way to resolve those into real
policies and then we can get rid of that custom handling.
* The RPCs that don't currently support auth tokens (i.e. those that don't
support HTTP endpoints) have not been updated with the new pre-forwarding auth
We'll be doing this under a separate PR to support RPC rate metrics.
This changeset fixes a long-standing point of confusion in metrics emitted by
the eval broker. The eval broker has a queue of "blocked" evals that are waiting
for an in-flight ("unacked") eval of the same job to be completed. But this
"blocked" state is not the same as the `blocked` status that we write to raft
and expose in the Nomad API to end users. There's a second metric
`nomad.blocked_eval.total_blocked` that refers to evaluations in that
state. This has caused ongoing confusion in major customer incidents and even in
our own documentation! (Fixed in this PR.)
There's little functional change in this PR aside from the name of the metric
emitted, but there's a bit refactoring to clean up the names in `eval_broker.go`
so that there aren't name collisions and multiple names for the same
state. Changes included are:
* Everything that was previously called "pending" referred to entities that were
associated witht he "ready" metric. These are all now called "ready" to match
the metric.
* Everything named "blocked" in `eval_broker.go` is now named "pending", except
for a couple of comments that actually refer to blocked RPCs.
* Added a note to the upgrade guide docs for 1.5.0.
* Fixed the scheduling performance metrics docs because the description for
`nomad.broker.total_blocked` was actually the description for
`nomad.blocked_eval.total_blocked`.
* Add config elements
* Wire in snapshot configuration to raft
* Add hot reload of raft config
* Add documentation for new raft settings
* Add changelog
* consul: correctly understand missing consul checks as unhealthy
This PR fixes a bug where Nomad assumed any registered Checks would exist
in the service registration coming back from Consul. In some cases, the
Consul may be slow in processing the check registration, and the response
object would not contain checks. Nomad would then scan the empty response
looking for Checks with failing health status, finding none, and then
marking a task/alloc as healthy.
In reality, we must always use Nomad's view of what checks should exist as
the source of truth, and compare that with the response Consul gives us,
making sure they match, before scanning the Consul response for failing
check statuses.
Fixes#15536
* consul: minor CR refactor using maps not sets
* consul: observe transition from healthy to unhealthy checks
* consul: spell healthy correctly
To see why I think this is a good change lets look at why I am making it
My disk was full, which means GC was happening agressively. So by the
time I called the logging endpoint from the SDK, the logs were GC'd
The error I was getting before was:
```
invalid character 'i' in literal false (expecting 'l')
```
Now the error I get is:
```
failed to decode log endpoint response as JSON: "failed to list entries: open /tmp/nomad.data.4219353875/alloc/f11fee50-2b66-a7a2-d3ec-8442cb3d557a/alloc/logs: no such file or directory"
```
Still not super descriptive but much more debugable
This PR adds support for configuring `proxy.upstreams[].config` for
Consul Connect upstreams. This is an opaque config value to Nomad -
the data is passed directly to Consul and is unknown to Nomad.
* connect: fix non-"tcp" ingress gateway validation
changes apply to http, http2, and grpc:
* if "hosts" is excluded, consul will use its default domain
e.g. <service-name>.ingress.dc1.consul
* can't set hosts with "*" service name
* test http2 and grpc too
* [no ci] first pass at plumbing grpc_ca_file
* consul: add support for grpc_ca_file for tls grpc connections in consul 1.14+
This PR adds client config to Nomad for specifying consul.grpc_ca_file
These changes combined with https://github.com/hashicorp/consul/pull/15913 should
finally enable Nomad users to upgrade to Consul 1.14+ and use tls grpc connections.
* consul: add cl entgry for grpc_ca_file
* docs: mention grpc_tls changes due to Consul 1.14
Devices are fingerprinted as groups of similar devices. This prevented
specifying specific device by their ID in constraint and affinity rules.
This commit introduces the `${device.ids}` attribute that returns a
comma separated list of IDs that are part of the device group. Users can
then use the set operators to write rules.
* vault: configure user agent on Nomad vault clients
This PR attempts to set the User-Agent header on each Vault API client
created by Nomad. Still need to figure a way to set User-Agent on the
Vault client created internally by consul-template.
* vault: fixup find-and-replace gone awry
This PR modifies the configuration of the networking pause contaier to include
the "unless-stopped" restart policy. The pause container should always be
restored into a running state until Nomad itself issues a stop command for the
container.
This is not a _perfect_ fix for #12216 but it should cover the 99% use case -
where a pause container gets accidently stopped / killed for some reason. There
is still a possibility where the pause container and main task container are
stopped and started in the order where the bad behavior persists, but this is
fundamentally unavoidable due to how docker itself abstracts and manages the
underlying network namespace referenced by the containers.
Closes#12216
The command line flag parsing and the HTTP header parsing for CSI secrets
incorrectly split at more than one '=' rune, making it impossible to use secrets
that included that rune.
* Add changes to make stale querystring param boolean
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Make error message more consistent
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Changes from code review + Adding CHANGELOG file
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Changes from code review to use github.com/shoenig/test package
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Change must.Nil() to must.NoError()
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Minor fix on the import order
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Fix existing code format too
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* Minor changes addressing code review feedbacks
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* swap must.EqOp() order of param provided
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
Signed-off-by: dttung2905 <ttdao.2015@accountancy.smu.edu.sg>
* basic-functionality demo for token CRUD
* Styling for tokens crud
* Tokens crud styles
* Expires, not expiry
* Mobile styles etc
* Refresh and redirect rules for policy save and token creation
* Delete method and associated serializer change
* Ability-checking for tokens
* Update policies acceptance tests to reflect new redirect rules
* Token ability unit tests
* Mirage config methods for token crud
* Token CRUD acceptance tests
* A couple visual diff snapshots
* Add and Delete abilities referenced for token operations
* Changing timeouts and adding a copy to clipboard action
* replaced accessor with secret when copying to clipboard
* PR comments addressed
* Simplified error passing for policy editor
If a plugin crashes quickly enough, we can get into a situation where the
deregister function is called before it's ever registered. Safely handle the
resulting nil pointer in the dynamic registry by not emitting a plugin event,
but also update the plugin event handler to tolerate nil pointers in case we
wire it up elsewhere in the future.
* client: sandbox go-getter subprocess with landlock
This PR re-implements the getter package for artifact downloads as a subprocess.
Key changes include
On all platforms, run getter as a child process of the Nomad agent.
On Linux platforms running as root, run the child process as the nobody user.
On supporting Linux kernels, uses landlock for filesystem isolation (via go-landlock).
On all platforms, restrict environment variables of the child process to a static set.
notably TMP/TEMP now points within the allocation's task directory
kernel.landlock attribute is fingerprinted (version number or unavailable)
These changes make Nomad client more resilient against a faulty go-getter implementation that may panic, and more secure against bad actors attempting to use artifact downloads as a privilege escalation vector.
Adds new e2e/artifact suite for ensuring artifact downloading works.
TODO: Windows git test (need to modify the image, etc... followup PR)
* landlock: fixup items from cr
* cr: fixup tests and go.mod file
This PR adds a fingerprinter to set the attribute
"plugins.cni.version.<name>" => "<version>"
for each CNI plugin in <client>.cni_path (/opt/cni/bin by default).
This PR is a continuation of #14917, where we missed the ipv6 cases.
Consul auto-inserts tagged_addresses for keys
- lan_ipv4
- wan_ipv4
- lan_ipv6
- wan_ipv6
even though the service registration coming from Nomad does not contain such
elements. When doing the differential between services Nomad expects to be
registered vs. the services actually registered into Consul, we must first
purge these automatically inserted tagged_addresses if they do not exist in
the Nomad view of the Consul service.
This PR adds a secondary path for cleaning up iptables created for an allocation
when the normal CNI library fails to do so. This typically happens when the state
of the pause container is unexpected - e.g. deleted out of band from Nomad. Before,
the iptables rules would be leaked which could lead to unexpected nat routing
behavior later on (in addition to leaked resources). With this change, we scan
for the rules created on behalf of the allocation being GC'd and delete them.
Fixes#6385
* Top nav auth dropdown (#15055)
* Basic dropdown styles
* Some cleanup
* delog
* Default nomad hover state styles
* Component separation-of-concerns and acceptance tests for auth dropdown
* lintfix
* [ui, sso] Handle token expiry 500s (#15073)
* Handle error states generally
* Dont direct, just redirect
* no longer need explicit error on controller
* Redirect on token-doesnt-exist
* Forgot to import our time lib
* Linting on _blank
* Redirect tests
* changelog
* [ui, sso] warn user about pending token expiry (#15091)
* Handle error states generally
* Dont direct, just redirect
* no longer need explicit error on controller
* Linting on _blank
* Custom notification actions and shift the template to within an else block
* Lintfix
* Make the closeAction optional
* changelog
* Add a mirage token that will always expire in 11 minutes
* Test for token expiry with ember concurrency waiters
* concurrency handling for earlier test, and button redirect test
* [ui] if ACLs are disabled, remove the Sign In link from the top of the UI (#15114)
* Remove top nav link if ACLs disabled
* Change to an enabled-by-default model since you get no agent config when ACLs are disabled but you lack a token
* PR feedback addressed; down with double negative conditionals
* lintfix
* ember getter instead of ?.prop
* [SSO] Auth Methods and Mock OIDC Flow (#15155)
* Big ol first pass at a redirect sign in flow
* dont recursively add queryparams on redirect
* Passing state and code qps
* In which I go off the deep end and embed a faux provider page in the nomad ui
* Buggy but self-contained flow
* Flow auto-delay added and a little more polish to resetting token
* secret passing turned to accessor passing
* Handle SSO Failure
* General cleanup and test fix
* Lintfix
* SSO flow acceptance tests
* Percy snapshots added
* Explicitly note the OIDC test route is mirage only
* Handling failure case for complete-auth
* Leentfeex
* Tokens page styles (#15273)
* styling and moving columns around
* autofocus and enter press handling
* Styles refined
* Split up manager and regular tests
* Standardizing to a binary status state
* Serialize auth-methods response to use "name" as primary key (#15380)
* Serializer for unique-by-name
* Use @classic because of class extension
* scheduler: create placements for non-register MRD
For multiregion jobs, the scheduler does not create placements on
registration because the deployment must wait for the other regions.
Once of these regions will then trigger the deployment to run.
Currently, this is done in the scheduler by considering any eval for a
multiregion job as "paused" since it's expected that another region will
eventually unpause it.
This becomes a problem where evals not triggered by a job registration
happen, such as on a node update. These types of regional changes do not
have other regions waiting to progress the deployment, and so they were
never resulting in placements.
The fix is to create a deployment at job registration time. This
additional piece of state allows the scheduler to differentiate between
a multiregion change, where there are other regions engaged in the
deployment so no placements are required, from a regional change, where
the scheduler does need to create placements.
This deployment starts in the new "initializing" status to signal to the
scheduler that it needs to compute the initial deployment state. The
multiregion deployment will wait until this deployment state is
persisted and its starts is set to "pending". Without this state
transition it's possible to hit a race condition where the plan applier
and the deployment watcher may step of each other and overwrite their
changes.
* changelog: add entry for #15325
When the scheduler checks feasibility of each node, it creates a "stack" which
carries attributes of the job and task group it needs to check feasibility
for. The `system` and `sysbatch` scheduler use a different stack than `service`
and `batch` jobs. This stack was missing the call to set the job ID and
namespace for the CSI check. This prevents CSI volumes from being scheduled for
system jobs whenever the volume is in a non-default namespace.
Set the job ID and namespace to match the generic scheduler.
* client: accommodate Consul 1.14.0 gRPC and agent self changes.
Consul 1.14.0 changed the way in which gRPC listeners are
configured, particularly when using TLS. Prior to the change, a
single listener was responsible for handling plain-text and
encrypted gRPC requests. In 1.14.0 and beyond, separate listeners
will be used for each, defaulting to 8502 and 8503 for plain-text
and TLS respectively.
The change means that Nomad’s Consul Connect integration would not
work when integrated with Consul clusters using TLS and running
1.14.0 or greater.
The Nomad Consul fingerprinter identifies the gRPC port Consul has
exposed using the "DebugConfig.GRPCPort" value from Consul’s
“/v1/agent/self” endpoint. In Consul 1.14.0 and greater, this only
represents the plain-text gRPC port which is likely to be disbaled
in clusters running TLS. In order to fix this issue, Nomad now
takes into account the Consul version and configured scheme to
optionally use “DebugConfig.GRPCTLSPort” value from Consul’s agent
self return.
The “consul_grcp_socket” allocrunner hook has also been updated so
that the fingerprinted gRPC port attribute is passed in. This
provides a better fallback method, when the operator does not
configure the “consul.grpc_address” option.
* docs: modify Consul Connect entries to detail 1.14.0 changes.
* changelog: add entry for #15309
* fixup: tidy tests and clean version match from review feedback.
* fixup: use strings tolower func.
This PR adds trace logging around the differential done between a Nomad service
registration and its corresponding Consul service registration, in an effort
to shed light on why a service registration request is being made.
* Add mount propagation to protobuf definition of mounts
* Fix formatting
* Add mount propagation to the simple roundtrip test.
* changelog: add entry for #15096
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
When we migrated to the updated autopilot library in Nomad 1.4.0, the interface
for finding servers changed. Previously autopilot would get the serf members and
call `IsServer` on each of them, leaving it up to the implementor to filter out
clients (and in Nomad's case, other regions). But in the "new" autopilot
library, the equivalent interface is `KnownServers` for which we did not filter
by region. This causes spurious attempts for the cross-region stats fetching,
which results in TLS errors and a lot of log noise.
Filter the member set by region to fix the regression.
* keyring: update handle to state inside replication loop
When keyring replication starts, we take a handle to the state store. But
whenever a snapshot is restored, this handle is invalidated and no longer points
to a state store that is receiving new keys. This leaks a bunch of memory too!
In addition to operator-initiated restores, when fresh servers are added to
existing clusters with large-enough state, the keyring replication can get
started quickly enough that it's running before the snapshot from the existing
clusters have been restored.
Fix this by updating the handle to the state store on each pass.
When an evaluation is acknowledged by a scheduler, the resulting plan is
guaranteed to cover up to the `waitIndex` set by the worker based on the most
recent evaluation for that job in the state store. At that point, we no longer
need to retain blocked evaluations in the broker that are older than that index.
Move all but the highest priority / highest `ModifyIndex` blocked eval into a
canceled set. When the `Eval.Ack` RPC returns from the eval broker it will
signal a reap of a batch of cancelable evals to write to raft. This paces the
cancelations limited by how frequently the schedulers are acknowledging evals;
this should reduce the risk of cancelations from overwhelming raft relative to
scheduler progress. In order to avoid straggling batches when the cluster is
quiet, we also include a periodic sweep through the cancelable list.
During unusual outage recovery scenarios on large clusters, a backlog of
millions of evaluations can appear. In these cases, the `eval delete` command can
put excessive load on the cluster by listing large sets of evals to extract the
IDs and then sending larges batches of IDs. Although the command's batch size
was carefully tuned, we still need to be JSON deserialize, re-serialize to
MessagePack, send the log entries through raft, and get the FSM applied.
To improve performance of this recovery case, move the batching process into the
RPC handler and the state store. The design here is a little weird, so let's
look a the failed options first:
* A naive solution here would be to just send the filter as the raft request and
let the FSM apply delete the whole set in a single operation. Benchmarking with
1M evals on a 3 node cluster demonstrated this can block the FSM apply for
several minutes, which puts the cluster at risk if there's a leadership
failover (the barrier write can't be made while this apply is in-flight).
* A less naive but still bad solution would be to have the RPC handler filter
and paginate, and then hand a list of IDs to the existing raft log
entry. Benchmarks showed this blocked the FSM apply for 20-30s at a time and
took roughly an hour to complete.
Instead, we're filtering and paginating in the RPC handler to find a page token,
and then passing both the filter and page token in the raft log. The FSM apply
recreates the paginator using the filter and page token to get roughly the same
page of evaluations, which it then deletes. The pagination process is fairly
cheap (only abut 5% of the total FSM apply time), so counter-intuitively this
rework ends up being much faster. A benchmark of 1M evaluations showed this
blocked the FSM apply for 20-30ms at a time (typical for normal operations) and
completes in less than 4 minutes.
Note that, as with the existing design, this delete is not consistent: a new
evaluation inserted "behind" the cursor of the pagination will fail to be
deleted.
client: fixed a bug where non-`docker` tasks with network isolation would leak network namespaces and iptables rules if the client was restarted while they were running
* client: avoid unconsumed channel in timer construction
This PR fixes a bug introduced in #11983 where a Timer initialized with 0
duration causes an immediate tick, even if Reset is called before reading the
channel. The fix is to avoid doing that, instead creating a Timer with a non-zero
initial wait time, and then immediately calling Stop.
* pr: remove redundant stop
The exec driver and other drivers derived from the shared executor check the
path of the command before handing off to libcontainer to ensure that the
command doesn't escape the sandbox. But we don't check any host volume mounts,
which should be safe to use as a source for executables if we're letting the
user mount them to the container in the first place.
Check the mount config to verify the executable lives in the mount's host path,
but then return an absolute path within the mount's task path so that we can hand
that off to libcontainer to run.
Includes a good bit of refactoring here because the anchoring of the final task
path has different code paths for inside the task dir vs inside a mount. But
I've fleshed out the test coverage of this a good bit to ensure we haven't
created any regressions in the process.
This PR implements ACLAuthMethod type, acl_auth_methods table schema and crud state store methods. It also updates nomadSnapshot.Persist and nomadSnapshot.Restore methods in order for them to work with the new table, and adds two new Raft messages: ACLAuthMethodsUpsertRequestType and ACLAuthMethodsDeleteRequestType
This PR is part of the SSO work captured under ☂️ ticket #13120.
This PR protects access to `templateHook.templateManager` with its lock. So
far we have not been able to reproduce the panic - but it seems either Poststart
is running without a Prestart being run first (should be impossible), or the
Update hook is running concurrently with Poststart, nil-ing out the templateManager
in a race with Poststart.
Fixes#15189
This PR solves a defect in the deserialization of api.Port structs when returning structs from theEventStream.
Previously, the api.Port struct's fields were decorated with both mapstructure and hcl tags to support the network.port stanza's use of the keyword static when posting a static port value. This works fine when posting a job and when retrieving any struct that has an embedded api.Port instance as long as the value is deserialized using JSON decoding. The EventStream, however, uses mapstructure to decode event payloads in the api package. mapstructure expects an underlying field named static which does not exist. The result was that the Port.Value field would always be set to 0.
Upon further inspection, a few things became apparent.
The struct already has hcl tags that support the indirection during job submission.
Serialization/deserialization with both the json and hcl packages produce the desired result.
The use of of the mapstructure tags provided no value as the Port struct contains only fields with primitive types.
This PR:
Removes the mapstructure tags from the api.Port structs
Updates the job parsing logic to use hcl instead of mapstructure when decoding Port instances.
Closes#11044
Co-authored-by: DerekStrickland <dstrickland@hashicorp.com>
Co-authored-by: Piotr Kazmierczak <470696+pkazmierczak@users.noreply.github.com>
Add a new `Eval.Count` RPC and associated HTTP API endpoints. This API is
designed to support interactive use in the `nomad eval delete` command to get a
count of evals expected to be deleted before doing so.
The state store operations to do this sort of thing are somewhat expensive, but
it's cheaper than serializing a big list of evals to JSON. Note that although it
seems like this could be done as an extra parameter and response field on
`Eval.List`, having it as its own endpoint avoids having to change the response
body shape and lets us avoid handling the legacy filter params supported by
`Eval.List`.
* scheduler: allow updates after alloc reconnects
When an allocation reconnects to a cluster the scheduler needs to run
special logic to handle the reconnection, check if a replacement was
create and stop one of them.
If the allocation kept running while the node was disconnected, it will
be reconnected with `ClientStatus: running` and the node will have
`Status: ready`. This combination is the same as the normal steady state
of allocation, where everything is running as expected.
In order to differentiate between the two states (an allocation that is
reconnecting and one that is just running) the scheduler needs an extra
piece of state.
The current implementation uses the presence of a
`TaskClientReconnected` task event to detect when the allocation has
reconnected and thus must go through the reconnection process. But this
event remains even after the allocation is reconnected, causing all
future evals to consider the allocation as still reconnecting.
This commit changes the reconnect logic to use an `AllocState` to
register when the allocation was reconnected. This provides the
following benefits:
- Only a limited number of task states are kept, and they are used for
many other events. It's possible that, upon reconnecting, several
actions are triggered that could cause the `TaskClientReconnected`
event to be dropped.
- Task events are set by clients and so their timestamps are subject
to time skew from servers. This prevents using time to determine if
an allocation reconnected after a disconnect event.
- Disconnect events are already stored as `AllocState` and so storing
reconnects there as well makes it the only source of information
required.
With the new logic, the reconnection logic is only triggered if the
last `AllocState` is a disconnect event, meaning that the allocation has
not been reconnected yet. After the reconnection is handled, the new
`ClientStatus` is store in `AllocState` allowing future evals to skip
the reconnection logic.
* scheduler: prevent spurious placement on reconnect
When a client reconnects it makes two independent RPC calls:
- `Node.UpdateStatus` to heartbeat and set its status as `ready`.
- `Node.UpdateAlloc` to update the status of its allocations.
These two calls can happen in any order, and in case the allocations are
updated before a heartbeat it causes the state to be the same as a node
being disconnected: the node status will still be `disconnected` while
the allocation `ClientStatus` is set to `running`.
The current implementation did not handle this order of events properly,
and the scheduler would create an unnecessary placement since it
considered the allocation was being disconnected. This extra allocation
would then be quickly stopped by the heartbeat eval.
This commit adds a new code path to handle this order of events. If the
node is `disconnected` and the allocation `ClientStatus` is `running`
the scheduler will check if the allocation is actually reconnecting
using its `AllocState` events.
* rpc: only allow alloc updates from `ready` nodes
Clients interact with servers using three main RPC methods:
- `Node.GetAllocs` reads allocation data from the server and writes it
to the client.
- `Node.UpdateAlloc` reads allocation from from the client and writes
them to the server.
- `Node.UpdateStatus` writes the client status to the server and is
used as the heartbeat mechanism.
These three methods are called periodically by the clients and are done
so independently from each other, meaning that there can't be any
assumptions in their ordering.
This can generate scenarios that are hard to reason about and to code
for. For example, when a client misses too many heartbeats it will be
considered `down` or `disconnected` and the allocations it was running
are set to `lost` or `unknown`.
When connectivity is restored the to rest of the cluster, the natural
mental model is to think that the client will heartbeat first and then
update its allocations status into the servers.
But since there's no inherit order in these calls the reverse is just as
possible: the client updates the alloc status and then heartbeats. This
results in a state where allocs are, for example, `running` while the
client is still `disconnected`.
This commit adds a new verification to the `Node.UpdateAlloc` method to
reject updates from nodes that are not `ready`, forcing clients to
heartbeat first. Since this check is done server-side there is no need
to coordinate operations client-side: they can continue sending these
requests independently and alloc update will succeed after the heartbeat
is done.
* chagelog: add entry for #15068
* code review
* client: skip terminal allocations on reconnect
When the client reconnects with the server it synchronizes the state of
its allocations by sending data using the `Node.UpdateAlloc` RPC and
fetching data using the `Node.GetClientAllocs` RPC.
If the data fetch happens before the data write, `unknown` allocations
will still be in this state and would trigger the
`allocRunner.Reconnect` flow.
But when the server `DesiredStatus` for the allocation is `stop` the
client should not reconnect the allocation.
* apply more code review changes
* scheduler: persist changes to reconnected allocs
Reconnected allocs have a new AllocState entry that must be persisted by
the plan applier.
* rpc: read node ID from allocs in UpdateAlloc
The AllocUpdateRequest struct is used in three disjoint use cases:
1. Stripped allocs from clients Node.UpdateAlloc RPC using the Allocs,
and WriteRequest fields
2. Raft log message using the Allocs, Evals, and WriteRequest fields
3. Plan updates using the AllocsStopped, AllocsUpdated, and Job fields
Adding a new field that would only be used in one these cases (1) made
things more confusing and error prone. While in theory an
AllocUpdateRequest could send allocations from different nodes, in
practice this never actually happens since only clients call this method
with their own allocations.
* scheduler: remove logic to handle exceptional case
This condition could only be hit if, somehow, the allocation status was
set to "running" while the client was "unknown". This was addressed by
enforcing an order in "Node.UpdateStatus" and "Node.UpdateAlloc" RPC
calls, so this scenario is not expected to happen.
Adding unnecessary code to the scheduler makes it harder to read and
reason about it.
* more code review
* remove another unused test
When a Nomad service starts it tries to establish a connection with
servers, but it also runs alloc runners to manage whatever allocations
it needs to run.
The alloc runner will invoke several hooks to perform actions, with some
of them requiring access to the Nomad servers, such as Native Service
Discovery Registration.
If the alloc runner starts before a connection is established the alloc
runner will fail, causing the allocation to be shutdown. This is
particularly problematic for disconnected allocations that are
reconnecting, as they may fail as soon as the client reconnects.
This commit changes the RPC request logic to retry it, using the
existing retry mechanism, if there are no servers available.
Allocations created before 1.4.0 will not have a workload identity token. When
the client running these allocs is upgraded to 1.4.x, the identity hook will run
and replace the node secret ID token used previously with an empty string. This
causes service discovery queries to fail.
Fallback to the node's secret ID when the allocation doesn't have a signed
identity. Note that pre-1.4.0 allocations won't have templates that read
Variables, so there's no threat that this new node ID secret will be able to
read data that the allocation shouldn't have access to.
* Adds meta to job list stub and displays a pack logo on the jobs index
* Changelog
* Modifying struct for optional meta param
* Explicitly ask for meta anytime I look up a job from index or job page
* Test case for the endpoint
* adding meta field to API struct and ommitting from response if empty
* passthru method added to api/jobs.list
* Meta param listed in docs for jobs list
* Update api/jobs.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* Job spec upload by click or drag
* pseudo-restrict formats
* Changelog
* Tweak to job spec upload to be above editor layer
* Within the job-editor again tho
* Beginning testcase cleanup
* Test progression
* refact: update codemirror fillin logic
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
If a GC claim is written and then volume is deleted before the `volumewatcher`
enters its run loop, we panic on the nil-pointer access. Simply doing a
nil-check at the top of the loop reveals a race condition around shutting down
the loop just as a new update is coming in.
Have the parent `volumeswatcher` send an initial update on the channel before
returning, so that we're still holding the lock. Update the watcher's `Stop`
method to set the running state, which lets us avoid having a second context and
makes stopping synchronous. This reduces the cases we have to handle in the run
loop.
Updated the tests now that we'll safely return from the goroutine and stop the
runner in a larger set of cases. Ran the tests with the `-race` detection flag
and fixed up any problems found here as well.
In order to limit how much the rekey job can monopolize a scheduler worker, we
limit how long it can run to 1min before stopping work and emitting a new
eval. But this exactly matches the default nack timeout, so it'll fail the eval
rather than getting a chance to emit a new one.
Set the timeout for the rekey eval to half the configured nack timeout.
When replication of a single key fails, the replication loop breaks early and
therefore keys that fall later in the sorting order will never get
replicated. This is particularly a problem for clusters impacted by the bug that
caused #14981 and that were later upgraded; the keys that were never replicated
can now never be replicated, and so we need to handle them safely.
Included in the replication fix:
* Refactor the replication loop so that each key replicated in a function call
that returns an error, to make the workflow more clear and reduce nesting. Log
the error and continue.
* Improve stability of keyring replication tests. We no longer block leadership
on initializing the keyring, so there's a race condition in the keyring tests
where we can test for the existence of the root key before the keyring has
been initialize. Change this to an "eventually" test.
But these fixes aren't enough to fix#14981 because they'll end up seeing an
error once a second complaining about the missing key, so we also need to fix
keyring GC so the keys can be removed from the state store. Now we'll store the
key ID used to sign a workload identity in the Allocation, and we'll index the
Allocation table on that so we can track whether any live Allocation was signed
with a particular key ID.
The List RPC correctly authorized against the prefix argument. But when
filtering results underneath the prefix, it only checked authorization for
standard ACL tokens and not Workload Identity. This results in WI tokens being
able to read List results (metadata only: variable paths and timestamps) for
variables under the `nomad/` prefix that belong to other jobs in the same
namespace.
Fixes the filtering and split the `handleMixedAuthEndpoint` function into
separate authentication and authorization steps so that we don't need to
re-verify the claim token on each filtered object.
Also includes:
* update semgrep rule for mixed auth endpoints
* variables: List returns empty set when all results are filtered
This change ensures that a token's expiry is checked before every
event is sent to the caller. Previously, a token could still be
used to listen for events after it had expired, as long as the
subscription was made while it was unexpired. This would last until
the token was garbage collected from state.
The check occurs within the RPC as there is currently no state
update when a token expires.
* client: ensure minimal cgroup controllers enabled
This PR fixes a bug where Nomad could not operate properly on operating
systems that set the root cgroup.subtree_control to a set of controllers that
do not include the minimal set of controllers needed by Nomad.
Nomad needs these controllers enabled to operate:
- cpuset
- cpu
- io
- memory
- pids
Now, Nomad will ensure these controllers are enabled during Client initialization,
adding them to cgroup.subtree_control as necessary. This should be particularly
helpful on the RHEL/CentOS/Fedora family of system. Ubuntu systems should be
unaffected as they enable all controllers by default.
Fixes: https://github.com/hashicorp/nomad/issues/14494
* docs: cleanup doc string
* client: cleanup controller writes, enhance log messages
The configuration knobs for root keyring garbage collection are present in the
consumer and present in the user-facing config, but we missed the spot where we
copy from one to the other. Fix this so that users can set their own thresholds.
The root key is automatically rotated every ~30d, but the function that does
both rotation and key GC was wired up such that `nomad system gc` caused an
unexpected key rotation. Split this into two functions so that `nomad system gc`
cleans up old keys without forcing a rotation, which will be done periodially
or by the `nomad operator root keyring rotate` command.
ACL tokens are granted permissions either by direct policy links
or via ACL role links. Callers should therefore be able to read
policies directly assigned to the caller token or indirectly by
ACL role links.
* refact: upgrade Promise.then to async/await
* naive solution (#14800)
* refact: use id instead of model
* chore: add changelog entry
* refact: add conditional safety around alloc
This changes adds ACL role creation and deletion to the event
stream. It is exposed as a single topic with two types; the filter
is primarily the role ID but also includes the role name.
While conducting this work it was also discovered that the events
stream has its own ACL resolution logic. This did not account for
ACL tokens which included role links, or tokens with expiry times.
ACL role links are now resolved to their policies and tokens are
checked for expiry correctly.
The client ACL cache was not accounting for tokens which included
ACL role links. This change modifies the behaviour to resolve role
links to policies. It will also now store ACL roles within the
cache for quick lookup. The cache TTL is configurable in the same
manner as policies or tokens.
Another small fix is included that takes into account the ACL
token expiry time. This was not included, which meant tokens with
expiry could be used past the expiry time, until they were GC'd.
* Adds searching and filtering for nodes on topology view
* Lintfix and changelog
* Acceptance tests for topology search and filter
* Search terms also apply to class and dc on topo page
* Initialize queryparam values so as to not break history state
* consul: register checks along with service on initial registration
This PR updates Nomad's Consul service client to include checks in
an initial service registration, so that the checks associated with
the service are registered "atomically" with the service. Before, we
would only register the checks after the service registration, which
causes problems where the service is deemed healthy, even if one or
more checks are unhealthy - especially problematic in the case where
SuccessBeforePassing is configured.
Fixes#3935
* cr: followup to fix cause of extra consul logging
* cr: fix another bug
* cr: fixup changelog
This PR updates Nomad's Consul service client to do map comparisons
using maps.Equal instead of reflect.DeepEqual. The bug fix is in how
DeepEqual treats nil slices different from empty slices, when actually
they should be treated the same.
* One-time tokens are not replicated between regions, so we don't want to enforce
that the version check across all of serf, just members in the same region.
* Scheduler: Disconnected clients handling is specific to a single region, so we
don't want to enforce that the version check across all of serf, just members in
the same region.
* Variables: enforce version check in Apply RPC
* Cleans up a bunch of legacy checks.
This changeset is specific to 1.4.x and the changes for previous versions of
Nomad will be manually backported in a separate PR.
In #14821 we fixed a panic that can happen if a leadership election happens in
the middle of an upgrade. That fix checks that all servers are at the minimum
version before initializing the keyring (which blocks evaluation processing
during trhe upgrade). But the check we implemented is over the serf membership,
which includes servers in any federated regions, which don't necessarily have
the same upgrade cycle.
Filter the version check by the leader's region.
Also bump up log levels of major keyring operations
Nomad runs one logmon process and also one docker_logger process for each
running allocation. A naive look at memory usage shows 10-30 MB of RSS, but a
closer look shows that most of this memory (ex. all but ~2MB for logmon) is
shared (`Shared_Clean` in Linux pmap).
But a heap dump of docker_logger shows that it currently has an extra ~2500 KiB
of heap (anonymously-mapped unshared memory) used for init blocks coming from
the agent code (ex. mostly regexes from go-version, structs, and the Consul
SDK). The packages for running logmon, docker_logger, and executor have an init
block that parses `os.Args` to drop into their own logic, which prevents them
from loading all the rest of the agent code and saves on memory, so this was
unexpected.
It looks like we accidentally reordered the imports in main to undo some of the
work originally done in 404d2d4c98f1df930be1ae9852fe6e6ae8c1517e. This changeset
restores the ordering. A follow-up heap dump shows this saves ~2MB of unshared
RSS per docker_logger process.
This PR adds a jobspec mutator to constrain jobs making use of checks
in the nomad service provider to nomad clients of at least v1.4.0.
Before, in a mixed client version cluster it was possible to submit
an NSD job making use of checks and for that job to land on an older,
incompatible client node.
Closes#14862
This PR removes the assertion around when the 'task' field of
a check may be set. Starting in Nomad 1.4 we automatically set
the task field on all checks in support of the NSD checks feature.
This is causing validation problems elsewhere, e.g. when a group
service using the Consul provider sets 'task' it will fail
validation that worked previously.
The assertion of leaving 'task' unset was only about making sure
job submitters weren't expecting some behavior, but in practice
is causing bugs now that we need the task field for more than it
was originally added for.
We can simply update the docs, noting when the task field set by
job submitters actually has value.
During an upgrade to Nomad 1.4.0, if a server running 1.4.0 becomes the leader
before one of the 1.3.x servers, the old server will crash because the keyring
is initialized and writes a raft entry.
Wait until all members are on a version that supports the keyring before
initializing it.
Previously, the splay timeout was only applied if a template re-render
caused a restart or a signal action. The `change_mode = "script"` was
running after the `if restart || len(signals) != 0` check, so it was
invoked at all times.
This change refactors the logic so it's easier to notice that new
`change_mode` options should start only after `splay` is applied.
* client: protect user lookups with global lock
This PR updates Nomad client to always do user lookups while holding
a global process lock. This is to prevent concurrency unsafe implementations
of NSS, but still enabling NSS lookups of users (i.e. cannot not use osusergo).
* cl: add cl
* cleanup: fixup linter warnings in schedular/feasible.go
* core: numeric operands comparisons in constraints
This PR changes constraint comparisons to be numeric rather than
lexical if both operands are integers or floats.
Inspiration #4856Closes#4729Closes#14719
* fix: always parse as int64
A test flake revealed a bug in the CSI unpublish workflow, where an unpublish
that comes from a client that's successfully done the node-unpublish step will
not have the claim checkpointed if the controller-unpublish step fails. This
will result in a delay in releasing the volume claim until the next GC.
This changeset also ensures we're using a new snapshot after each write to raft,
and fixes two timing issues in test where either the volume watcher can
unpublish before the unpublish RPC is sent or we don't wait long enough in
resource-restricted environements like GHA.
* fingerprint: add node attr for reserverable cores
Add an attribute for the number of reservable CPU cores as they may
differ from the existing `cpu.numcores` due to client configuration or
OS support.
Hopefully clarifies some confusion in #14676
* add changelog
* num_reservable_cores -> reservablecores
The artifact getter uses the go-getter library to fetch files from
different sources. Any bug in this library that results in a panic can
cause the entire Nomad client to crash due to a single file download
attempt.
This change aims to guard against this types of crashes by recovering
from panics when the getter attempts to download an artifact. The
resulting panic is converted to an error that is stored as a task event
for operator visibility and the panic stack trace is logged to the
client's log.
http.NewRequestWithContext will only set the right value for
Content-Length if the input is *bytes.Buffer, *bytes.Reader, or
*strings.Reader [0].
Since os.Stdin is an os.File, POST requests made with the `nomad
operator api` command would always have Content-Length set to -1, which
is interpreted as an unknown length by web servers.
[0]: https://pkg.go.dev/net/http#NewRequestWithContext
* Warning on attempt to leave
* Lintfix
* Only router.off once
* Dont warn on transition when only updating queryparams
* Remove double-push and queryparam-only issues, thanks @lgfa29
* Acceptance tests
* Changelog
Clients periodically fingerprint Vault and Consul to ensure the server has
updated attributes in the client's fingerprint. If the client can't reach
Vault/Consul, the fingerprinter clears the attributes and requires a node
update. Although this seems like correct behavior so that we can detect
intentional removal of Vault/Consul access, it has two serious failure modes:
(1) If a local Consul agent is restarted to pick up configuration changes and the
client happens to fingerprint at that moment, the client will update its
fingerprint and result in evaluations for all its jobs and all the system jobs
in the cluster.
(2) If a client loses Vault connectivity, the same thing happens. But the
consequences are much worse in the Vault case because Vault is not run as a
local agent, so Vault connectivity failures are highly correlated across the
entire cluster. A 15 second Vault outage will cause a new `node-update`
evalution for every system job on the cluster times the number of nodes, plus
one `node-update` evaluation for every non-system job on each node. On large
clusters of 1000s of nodes, we've seen this create a large backlog of evaluations.
This changeset updates the fingerprinting behavior to keep the last fingerprint
if Consul or Vault queries fail. This prevents a storm of evaluations at the
cost of requiring a client restart if Consul or Vault is intentionally removed
from the client.
* scheduler: Fix bug where the scheduler would treat multiregion jobs as paused for job types that don't use deployments
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* button styles
* Further styles including global toggle adjustment
* sidebar funcs and header
* Functioning task logs in high-level sidebars
* same-lineify the show tasks toggle
* Changelog
* Full-height sidebar calc in css, plz drop soon container queries
* Active status and query params for allocations page
* Reactive shouldShowLogs getter and added to client and task group pages
* Higher order func passing, thanks @DingoEatingFuzz
* Non-service job types get allocation params passed
* Keyframe animation for task log sidebar
* Acceptance test
* A few more sub-row tests
* Lintfix
In Nomad 1.2.6 we shipped `eval list`, which accepts a `-json` flag, and
deprecated the usage of `eval status` without an evaluation ID with an upgrade
note that it would be removed in Nomad 1.4.0. This changeset completes that
work.
The `operator debug` command writes JSON files from API responses as a single
line containing an array of JSON objects. But some of these files can be
extremely large (GB's) for large production clusters, which makes it difficult
to parse them using typical line-oriented Unix command line tools that can
stream their inputs without consuming a lot of memory.
For collections that are typically large, instead emit newline-delimited JSON.
This changeset includes some first-pass refactoring of this command. It breaks
up monolithic methods that validate a path, create a file, serialize objects,
and write them to disk into smaller functions, some of which can now be
standalone to take advantage of generics.
Operators may have a setup whereby the TLS config comes from a
source other than setting Nomad specific env vars. In this case,
we should attempt to identify the scheme using the config setting
as a fallback.
* Added task links to various alloc tables
* Lintfix
* Border collapse and added to task group page
* Logs icon temporarily removed and localStorage added
* Mock task added to test
* Delog
* Two asserts in new test
* Remove commented-out code
* Changelog
* Removing args.allocation deps
* First attempt at stabilizing percy snapshots with faker
* Tokens seed moved to before management token generation
* Faker seed only in token test
* moving seed after storage clear
* And again, but back to no faker seeding
* Isolated seed and temporary log
* Setting seed(1) wherever we're snapshotting, or before establishing cluster scenarios
* Deliberate noop to see if percy is stable
* Changelog entry
* scheduler: stopped-yet-running allocs are still running
* scheduler: test new stopped-but-running logic
* test: assert nonoverlapping alloc behavior
Also add a simpler Wait test helper to improve line numbers and save few
lines of code.
* docs: tried my best to describe #10446
it's not concise... feedback welcome
* scheduler: fix test that allowed overlapping allocs
* devices: only free devices when ClientStatus is terminal
* test: output nicer failure message if err==nil
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
A Nomad user reported problems with CSI volumes associated with failed
allocations, where the Nomad server did not send a controller unpublish RPC.
The controller unpublish is skipped if other non-terminal allocations on the
same node claim the volume. The check has a bug where the allocation belonging
to the claim being freed was included in the check incorrectly. During a normal
allocation stop for job stop or a new version of the job, the allocation is
terminal. But allocations that fail are not yet marked terminal at the point in
time when the client sends the unpublish RPC to the server.
For CSI plugins that support controller attach/detach, this means that the
controller will not be able to detach the volume from the allocation's host and
the replacement claim will fail until a GC is run. This changeset fixes the
conditional so that the claim's own allocation is not included, and makes the
logic easier to read. Include a test case covering this path.
Also includes two minor extra bugfixes:
* Entities we get from the state store should always be copied before
altering. Ensure that we copy the volume in the top-level unpublish workflow
before handing off to the steps.
* The list stub object for volumes in `nomad/structs` did not match the stub
object in `api`. The `api` package also did not include the current
readers/writers fields that are expected by the UI. True up the two objects and
add the previously undocumented fields to the docs.
This PR modifies RandomStagger to protect against negative input
values. If the given interval is negative, the value returned will
be somewhere in the stratosphere. Instead, treat negative inputs
like zero, returning zero.
When configuring Consul Service Mesh, it's sometimes necessary to
provide dynamic value that are only known to Nomad at runtime. By
interpolating configuration values (in addition to configuration keys),
user are able to pass these dynamic values to Consul from their Nomad
jobs.
Nomad's original autopilot was importing from a private package in Consul. It
has been moved out to a shared library. Switch Nomad to use this library so that
we can eliminate the import of Consul, which is necessary to build Nomad ENT
with the current version of the Consul SDK. This also will let us pick up
autopilot improvements shared with Consul more easily.
These options are mutually exclusive but, since `-hcl2-strict` defaults
to `true` users had to explicitily set it to `false` when using `-hcl1`.
Also return `255` when job plan fails validation as this is the expected
code in this situation.
This PR refactors the cgroups v2 group kill code path to use the
cgroups.kill interface file for destroying the cgroup. Previously
we copied the freeze + sigkill + unfreeze pattern from the v1 code,
but v2 provides a more efficient and more race-free way to handle
this.
Closes#14371
Nomad reconciles services it expects to be registered in Consul with
what is actually registered in the local Consul agent. This is necessary
to prevent leaking service registrations if Nomad crashes at certain
points (or if there are bugs).
When Consul has namespaces enabled, we must iterate over each available
namespace to be sure no services were leaked into non-default
namespaces.
Since this reconciliation happens often, there's no need to require
results from the Consul leader server. In large clusters this creates
far more load than the "freshness" of the response is worth.
Therefore this patch switches the request to AllowStale=true
This PR refactors the code path in Client startup for setting up the cpuset
cgroup manager (non-linux systems not affected).
Before, there was a logic bug where we would try to read the cpuset.cpus.effective
cgroup interface file before ensuring nomad's parent cgroup existed. Therefor that
file would not exist, and the list of useable cpus would be empty. Tasks started
thereafter would not have a value set for their cpuset.cpus.
The refactoring fixes some less than ideal coding style. Instead we now bootstrap
each cpuset manager type (v1/v2) within its own constructor. If something goes
awry during bootstrap (e.g. cgroups not enabled), the constructor returns the
noop implementation and logs a warning.
Fixes#14229
Now that tasks that have finished running can be restarted, the UI needs
to use the actual task state to determine which CSS class to use when
rendering the task lifecycle chart element.
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
The `namespace` field was not included in the equality check between old and new
Vault configurations, which meant that a Vault config change that only changed
the namespace would not be detected as a change and the clients would not be
reloaded.
Also, the comparison for boolean fields such as `enabled` and
`allow_unauthenticated` was on the pointer and not the value of that pointer,
which results in spurious reloads in real config reload that is easily missed in
typical test scenarios.
Includes a minor refactor of the order of fields for `Copy` and `Merge` to match
the struct fields in hopes it makes it harder to make this mistake in the
future, as well as additional test coverage.
This PR causes the logmon task runner to acquire the binary of the
Nomad executable in an 'init' block, so as to almost certainly get
the name while the nomad file still exists.
This is an attempt at fixing the case where a deleted Nomad file
(e.g. during upgrade) may be getting renamed with a mysterious
suffix first.
If this doesn't work, as a last resort we can literally just trim
the mystery string.
Fixes: #14079
This PR documents a change made in the enterprise version of nomad that addresses the following issue:
When a user tries to filter audit logs, they do so with a stanza that looks like the following:
audit {
enabled = true
filter "remove deletes" {
type = "HTTPEvent"
endpoints = ["*"]
stages = ["OperationComplete"]
operations = ["DELETE"]
}
}
When specifying both an "endpoint" and a "stage", the events with both matching a "endpoint" AND a matching "stage" will be filtered.
When specifying both an "endpoint" and an "operation" the events with both matching a "endpoint" AND a matching "operation" will be filtered.
When specifying both a "stage" and an "operation" the events with a matching a "stage" OR a matching "operation" will be filtered.
The "OR" logic with stages and operations is unexpected and doesn't allow customers to get specific on which events they want to filter. For instance the following use-case is impossible to achieve: "I want to filter out all OperationReceived events that have the DELETE verb".
This PR activates the osuergo build tag in GNUMakefile. This forces the os/user
package to be compiled without CGO. Doing so seems to resolve a race condition
in getpwnam_r that causes alloc creation to hang or panic on `user.Lookup("nobody")`.
The current implementation uses the task's finishedAt field to determine
if a task is active of not, but this check is not accurate. A task in
the "pending" state will not have finishedAt value but it's also not
active.
This discrepancy results in some components, like the inline stats chart
of the task row component, to be displayed even whey they shouldn't.
The original design for workload identities and ACLs allows for operators to
extend the automatic capabilities of a workload by using a specially-named
policy. This has shown to be potentially unsafe because of naming collisions, so
instead we'll allow operators to explicitly attach a policy to a workload
identity.
This changeset adds workload identity fields to ACL policy objects and threads
that all the way down to the command line. It also a new secondary index to the
ACL policy table on namespace and job so that claim resolution can efficiently
query for related policies.
When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
* Initialized keyboard service
Neat but funky: dynamic subnav traversal
👻
generalized traverseSubnav method
Shift as special modifier key
Nice little demo panel
Keyboard shortcuts keycard
Some animation styles on keyboard shortcuts
Handle situations where a link is deeply nested from its parent menu item
Keyboard service cleanup
helper-based initializer and teardown for new contextual commands
Keyboard shortcuts modal component added and demo-ghost removed
Removed j and k from subnav traversal
Register and unregister methods for subnav plus new subnavs for volumes and volume
register main nav method
Generalizing the register nav method
12762 table keynav (#12975)
* Experimental feature: shortcut visual hints
* Long way around to a custom modifier for keyboard shortcuts
* dynamic table and list iterative shortcuts
* Progress with regular old tether
* Delogging
* Table Keynav tether fix, server and client navs, and fix to shiftless on modified arrow keys
Go to Optimize keyboard link and storage key changed to g r
parameterized jobs keyboard nav
Dynamic numeric keynav for multiple tables (#13482)
* Multiple tables init
* URL-bind enumerable keyboard commands and add to more taskRow and allocationRows
* Type safety and lint fixes
* Consolidated push to keyCommands
* Default value when removing keyCommands
* Remove the URL-based removal method and perform a recompute on any add
Get tests passing in Keynav: remove math helpers and a few other defensive moves (#13761)
* Remove ember math helpers
* Test fixes for jobparts/body
* Kill an unneeded integration helper test
* delog
* Trying if disabling percy lets this finish
* Okay so its not percy; try parallelism in circle
* Percyless yet again
* Trying a different angle to not have percy
* Upgrade percy to 1.6.1
[ui] Keyboard nav: "u" key to go up a level (#13754)
* U to go up a level
* Mislabelled my conditional
* Custom lint ignore rule
* Custom lint ignore rule, this time with commas
* Since we're getting rid of ember math helpers elsewhere, do the math ourselves here
Replace ArrowLeft etc. with an ascii arrow (#13776)
* Replace ArrowLeft etc. with an ascii arrow
* non-mutative helper cleanup
Keyboard Nav: let users rebind their shortcuts (#13781)
* click-outside and shortcuts enabled/disabled toggle
* Trap focus when modal open
* Enabled/disabled saved to localStorage
* Autofocus edit button on variable index
* Modal overflow styles
* Functional rebind
* Saving rebinds to localStorage for all majors
* Started on defaultCommandBindings
* Modal header style and cancel rebind on escape
* keyboardable keybindings w buttons instead of spans
* recording and defaultvalues
* Enter short-circuits rebind
* Only some commands are rebindable, and dont show dupes
* No unused get import
* More visually distinct header on modal
* Disallowed keys for rebind, showing buffer as you type, and moving dedupe to modal logic
willDestroy hook to prevent tests from doubling/tripling up addEventListener on kb events
remove unused tests
Keyboard Navigation acceptance tests (#13893)
* Acceptance tests for keyboard modal
* a11y audit fix and localStorage clear
* Bind/rebind/localStorage tests
* Keyboard tests for dynamic nav and tables
* Rebinder and assert expectation
* Second percy snapshot showing hints no longer relevant
Weird issue where linktos with query props specifically from the task-groups page would fail to route / hit undefined.shouldSuperCede errors
Adds the concept of exclusivity to a keycommand, removing peers that also share its label
Lintfix
Changelog and PR feedback
Changelog and PR feedback
Fix to rebinding in firefox by blurring the now-disabled button on rebind (#14053)
* Secure Variables shortcuts removed
* Variable index route autofocus removed
* Updated changelog entry
* Updated changelog entry
* Keynav docs (#14148)
* Section added to the API Docs UI page
* Added a note about disabling
* Prev and Next order
* Remove dev log and unneeded comments
Seth Hoenig