Add a new `Eval.Count` RPC and associated HTTP API endpoints. This API is
designed to support interactive use in the `nomad eval delete` command to get a
count of evals expected to be deleted before doing so.
The state store operations to do this sort of thing are somewhat expensive, but
it's cheaper than serializing a big list of evals to JSON. Note that although it
seems like this could be done as an extra parameter and response field on
`Eval.List`, having it as its own endpoint avoids having to change the response
body shape and lets us avoid handling the legacy filter params supported by
`Eval.List`.
* scheduler: allow updates after alloc reconnects
When an allocation reconnects to a cluster the scheduler needs to run
special logic to handle the reconnection, check if a replacement was
create and stop one of them.
If the allocation kept running while the node was disconnected, it will
be reconnected with `ClientStatus: running` and the node will have
`Status: ready`. This combination is the same as the normal steady state
of allocation, where everything is running as expected.
In order to differentiate between the two states (an allocation that is
reconnecting and one that is just running) the scheduler needs an extra
piece of state.
The current implementation uses the presence of a
`TaskClientReconnected` task event to detect when the allocation has
reconnected and thus must go through the reconnection process. But this
event remains even after the allocation is reconnected, causing all
future evals to consider the allocation as still reconnecting.
This commit changes the reconnect logic to use an `AllocState` to
register when the allocation was reconnected. This provides the
following benefits:
- Only a limited number of task states are kept, and they are used for
many other events. It's possible that, upon reconnecting, several
actions are triggered that could cause the `TaskClientReconnected`
event to be dropped.
- Task events are set by clients and so their timestamps are subject
to time skew from servers. This prevents using time to determine if
an allocation reconnected after a disconnect event.
- Disconnect events are already stored as `AllocState` and so storing
reconnects there as well makes it the only source of information
required.
With the new logic, the reconnection logic is only triggered if the
last `AllocState` is a disconnect event, meaning that the allocation has
not been reconnected yet. After the reconnection is handled, the new
`ClientStatus` is store in `AllocState` allowing future evals to skip
the reconnection logic.
* scheduler: prevent spurious placement on reconnect
When a client reconnects it makes two independent RPC calls:
- `Node.UpdateStatus` to heartbeat and set its status as `ready`.
- `Node.UpdateAlloc` to update the status of its allocations.
These two calls can happen in any order, and in case the allocations are
updated before a heartbeat it causes the state to be the same as a node
being disconnected: the node status will still be `disconnected` while
the allocation `ClientStatus` is set to `running`.
The current implementation did not handle this order of events properly,
and the scheduler would create an unnecessary placement since it
considered the allocation was being disconnected. This extra allocation
would then be quickly stopped by the heartbeat eval.
This commit adds a new code path to handle this order of events. If the
node is `disconnected` and the allocation `ClientStatus` is `running`
the scheduler will check if the allocation is actually reconnecting
using its `AllocState` events.
* rpc: only allow alloc updates from `ready` nodes
Clients interact with servers using three main RPC methods:
- `Node.GetAllocs` reads allocation data from the server and writes it
to the client.
- `Node.UpdateAlloc` reads allocation from from the client and writes
them to the server.
- `Node.UpdateStatus` writes the client status to the server and is
used as the heartbeat mechanism.
These three methods are called periodically by the clients and are done
so independently from each other, meaning that there can't be any
assumptions in their ordering.
This can generate scenarios that are hard to reason about and to code
for. For example, when a client misses too many heartbeats it will be
considered `down` or `disconnected` and the allocations it was running
are set to `lost` or `unknown`.
When connectivity is restored the to rest of the cluster, the natural
mental model is to think that the client will heartbeat first and then
update its allocations status into the servers.
But since there's no inherit order in these calls the reverse is just as
possible: the client updates the alloc status and then heartbeats. This
results in a state where allocs are, for example, `running` while the
client is still `disconnected`.
This commit adds a new verification to the `Node.UpdateAlloc` method to
reject updates from nodes that are not `ready`, forcing clients to
heartbeat first. Since this check is done server-side there is no need
to coordinate operations client-side: they can continue sending these
requests independently and alloc update will succeed after the heartbeat
is done.
* chagelog: add entry for #15068
* code review
* client: skip terminal allocations on reconnect
When the client reconnects with the server it synchronizes the state of
its allocations by sending data using the `Node.UpdateAlloc` RPC and
fetching data using the `Node.GetClientAllocs` RPC.
If the data fetch happens before the data write, `unknown` allocations
will still be in this state and would trigger the
`allocRunner.Reconnect` flow.
But when the server `DesiredStatus` for the allocation is `stop` the
client should not reconnect the allocation.
* apply more code review changes
* scheduler: persist changes to reconnected allocs
Reconnected allocs have a new AllocState entry that must be persisted by
the plan applier.
* rpc: read node ID from allocs in UpdateAlloc
The AllocUpdateRequest struct is used in three disjoint use cases:
1. Stripped allocs from clients Node.UpdateAlloc RPC using the Allocs,
and WriteRequest fields
2. Raft log message using the Allocs, Evals, and WriteRequest fields
3. Plan updates using the AllocsStopped, AllocsUpdated, and Job fields
Adding a new field that would only be used in one these cases (1) made
things more confusing and error prone. While in theory an
AllocUpdateRequest could send allocations from different nodes, in
practice this never actually happens since only clients call this method
with their own allocations.
* scheduler: remove logic to handle exceptional case
This condition could only be hit if, somehow, the allocation status was
set to "running" while the client was "unknown". This was addressed by
enforcing an order in "Node.UpdateStatus" and "Node.UpdateAlloc" RPC
calls, so this scenario is not expected to happen.
Adding unnecessary code to the scheduler makes it harder to read and
reason about it.
* more code review
* remove another unused test
When a Nomad service starts it tries to establish a connection with
servers, but it also runs alloc runners to manage whatever allocations
it needs to run.
The alloc runner will invoke several hooks to perform actions, with some
of them requiring access to the Nomad servers, such as Native Service
Discovery Registration.
If the alloc runner starts before a connection is established the alloc
runner will fail, causing the allocation to be shutdown. This is
particularly problematic for disconnected allocations that are
reconnecting, as they may fail as soon as the client reconnects.
This commit changes the RPC request logic to retry it, using the
existing retry mechanism, if there are no servers available.
Also add some debug log lines for this test, because it doesn't make sense
for the allocation to be complete yet a task in the allocation to be not
started yet, which is what the test failures are implying.
Allocations created before 1.4.0 will not have a workload identity token. When
the client running these allocs is upgraded to 1.4.x, the identity hook will run
and replace the node secret ID token used previously with an empty string. This
causes service discovery queries to fail.
Fallback to the node's secret ID when the allocation doesn't have a signed
identity. Note that pre-1.4.0 allocations won't have templates that read
Variables, so there's no threat that this new node ID secret will be able to
read data that the allocation shouldn't have access to.
* Adds meta to job list stub and displays a pack logo on the jobs index
* Changelog
* Modifying struct for optional meta param
* Explicitly ask for meta anytime I look up a job from index or job page
* Test case for the endpoint
* adding meta field to API struct and ommitting from response if empty
* passthru method added to api/jobs.list
* Meta param listed in docs for jobs list
* Update api/jobs.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* Job spec upload by click or drag
* pseudo-restrict formats
* Changelog
* Tweak to job spec upload to be above editor layer
* Within the job-editor again tho
* Beginning testcase cleanup
* Test progression
* refact: update codemirror fillin logic
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
If a GC claim is written and then volume is deleted before the `volumewatcher`
enters its run loop, we panic on the nil-pointer access. Simply doing a
nil-check at the top of the loop reveals a race condition around shutting down
the loop just as a new update is coming in.
Have the parent `volumeswatcher` send an initial update on the channel before
returning, so that we're still holding the lock. Update the watcher's `Stop`
method to set the running state, which lets us avoid having a second context and
makes stopping synchronous. This reduces the cases we have to handle in the run
loop.
Updated the tests now that we'll safely return from the goroutine and stop the
runner in a larger set of cases. Ran the tests with the `-race` detection flag
and fixed up any problems found here as well.
In order to limit how much the rekey job can monopolize a scheduler worker, we
limit how long it can run to 1min before stopping work and emitting a new
eval. But this exactly matches the default nack timeout, so it'll fail the eval
rather than getting a chance to emit a new one.
Set the timeout for the rekey eval to half the configured nack timeout.
When replication of a single key fails, the replication loop breaks early and
therefore keys that fall later in the sorting order will never get
replicated. This is particularly a problem for clusters impacted by the bug that
caused #14981 and that were later upgraded; the keys that were never replicated
can now never be replicated, and so we need to handle them safely.
Included in the replication fix:
* Refactor the replication loop so that each key replicated in a function call
that returns an error, to make the workflow more clear and reduce nesting. Log
the error and continue.
* Improve stability of keyring replication tests. We no longer block leadership
on initializing the keyring, so there's a race condition in the keyring tests
where we can test for the existence of the root key before the keyring has
been initialize. Change this to an "eventually" test.
But these fixes aren't enough to fix#14981 because they'll end up seeing an
error once a second complaining about the missing key, so we also need to fix
keyring GC so the keys can be removed from the state store. Now we'll store the
key ID used to sign a workload identity in the Allocation, and we'll index the
Allocation table on that so we can track whether any live Allocation was signed
with a particular key ID.
The `Eval.Delete` endpoint has a helper that takes a list of jobs and allocs and
determines whether the eval associated with those is safe to delete (based on
their state). Filtering improvements to the `Eval.Delete` endpoint are going to
need this check to run in the state store itself for consistency.
Refactor to push this check down into the state store to keep the eventual diff
for that work reasonable.
While working on filtering improvements to the `Eval.Delete` endpoint I noticed
that this test was going to need to expand significantly and needed some
refactoring to make that work nicely. In order to reduce the size of the
eventual diff, I've pulled this refactoring out into its own changeset.
The List RPC correctly authorized against the prefix argument. But when
filtering results underneath the prefix, it only checked authorization for
standard ACL tokens and not Workload Identity. This results in WI tokens being
able to read List results (metadata only: variable paths and timestamps) for
variables under the `nomad/` prefix that belong to other jobs in the same
namespace.
Fixes the filtering and split the `handleMixedAuthEndpoint` function into
separate authentication and authorization steps so that we don't need to
re-verify the claim token on each filtered object.
Also includes:
* update semgrep rule for mixed auth endpoints
* variables: List returns empty set when all results are filtered
This change ensures that a token's expiry is checked before every
event is sent to the caller. Previously, a token could still be
used to listen for events after it had expired, as long as the
subscription was made while it was unexpired. This would last until
the token was garbage collected from state.
The check occurs within the RPC as there is currently no state
update when a token expires.
* [no ci] use json for grouping packages for testing
* [no ci] able to get packages in group
* [no ci] able to run groups of tests
* [no ci] more
* [no ci] try disable circle unit tests
* ci: use actions/checkout@v3
* ci: rename to quick
* ci: need make dev in mods cache step
* ci: make compile step depend on checks step
* ci: bump consul and vault versions
* ci: need make dev for group tests
* ci: update ci unit testing docs
* docs: spell plumbing correctly
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
The existing docs on required capabilities are a little sparse and have been the
subject of a lots of questions. Expand on this information and provide a pointer
to the ongoing design discussion around rootless Nomad.
* client: ensure minimal cgroup controllers enabled
This PR fixes a bug where Nomad could not operate properly on operating
systems that set the root cgroup.subtree_control to a set of controllers that
do not include the minimal set of controllers needed by Nomad.
Nomad needs these controllers enabled to operate:
- cpuset
- cpu
- io
- memory
- pids
Now, Nomad will ensure these controllers are enabled during Client initialization,
adding them to cgroup.subtree_control as necessary. This should be particularly
helpful on the RHEL/CentOS/Fedora family of system. Ubuntu systems should be
unaffected as they enable all controllers by default.
Fixes: https://github.com/hashicorp/nomad/issues/14494
* docs: cleanup doc string
* client: cleanup controller writes, enhance log messages
