The lock isn't needed after we clean up the expire bin, and as seen
in #3700 we can get into a deadlock waiting to place the expire index
into the channel while holding this lock.
Fixes#3700
* Relaxes Autopilot promotion logic.
When we defaulted the Raft protocol version to 3 in #3477 we made
the numPeers() routine more strict to only count voters (this is
more conservative and more correct). This had the side effect of
breaking rolling updates because it's at odds with the Autopilot
non-voter promotion logic.
That logic used to wait to only promote to maintain an odd quorum
of servers. During a rolling update (add one new server, wait, and
then kill an old server) the dead server cleanup would still count
the old server as a peer, which is conservative and the right thing
to do, and no longer count the non-voter. This would wait to promote,
so you could get into a stalemate. It is safer to promote early than
remove early, so by promoting as soon as possible we have chosen
that as the solution here.
Fixes#3611
* Gets rid of unnecessary extra not-a-voter check.
This patch removes the porter tool which hands out free ports from a
given range with a library which does the same thing. The challenge for
acquiring free ports in concurrent go test runs is that go packages are
tested concurrently and run in separate processes. There has to be some
inter-process synchronization in preventing processes allocating the
same ports.
freeport allocates blocks of ports from a range expected to be not in
heavy use and implements a system-wide mutex by binding to the first
port of that block for the lifetime of the application. Ports are then
provided sequentially from that block and are tested on localhost before
being returned as available.
* Adds client-side retry for no leader errors.
This paves over the case where the client was connected to the leader
when it loses leadership.
* Adds a configurable server RPC drain time and a fail-fast path for RPCs.
When a server leaves it gets removed from the Raft configuration, so it will
never know who the new leader server ends up being. Without this we'd be
doomed to wait out the RPC hold timeout and then fail. This makes things fail
a little quicker while a sever is draining, and since we added a client retry
AND since the server doing this has already shut down and left the Serf LAN,
clients should retry against some other server.
* Makes the RPC hold timeout configurable.
* Reorders struct members.
* Sets the RPC hold timeout default for test servers.
* Bumps the leave drain time up to 5 seconds.
* Robustifies retries with a simpler client-side RPC hold.
* Reverts untended delete.
* Fixes handling of stop channel and failed barrier attempts.
There were two issues here. First, we needed to not exit when there
was a timeout trying to write the barrier, because Raft might not
step down, so we'd be left as the leader but having run all the step
down actions.
Second, we didn't close over the stopCh correctly, so it was possible
to nil that out and have the leaderLoop never exit. We close over it
properly AND sequence the nil-ing of it AFTER the leaderLoop exits for
good measure, so the code is more robust.
Fixes#3545
* Cleans up based on code review feedback.
* Tweaks comments.
* Renames variables and removes comments.
* Make sure that id and address are set in member created during reaping of catalog nodes that have been removed from serf
* Get address from node table in the state store rather than from service address
* Fix incorrect lookup by checkname instead of node name
* Make sure that serverlookup is called with the right address format, added unit test.
* Address code review comments
* Tweaks style stuff.
* Changes default Raft protocol to 3.
* Changes numPeers() to report only voters.
This should have been there before, but it's more obvious that this
is incorrect now that we default the Raft protocol to 3, which puts
new servers in a read-only state while Autopilot waits for them to
become healthy.
* Fixes TestLeader_RollRaftServer.
* Fixes TestOperator_RaftRemovePeerByAddress.
* Fixes TestServer_*.
Relaxed the check for a given number of voter peers and instead do
a thorough check that all servers see each other in their Raft
configurations.
* Fixes TestACL_*.
These now just check for Raft replication to be set up, and don't
care about the number of voter peers.
* Fixes TestOperator_Raft_ListPeers.
* Fixes TestAutopilot_CleanupDeadServerPeriodic.
* Fixes TestCatalog_ListNodes_ConsistentRead_Fail.
* Fixes TestLeader_ChangeServerID and adjusts the conn pool to throw away
sockets when it sees io.EOF.
* Changes version to 1.0.0 in the options doc.
* Makes metrics test more deterministic with autopilot metrics possible.
* new config parser for agent
This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:
* add HCL support
* all configuration fragments in tests and for default config are
expressed as HCL fragments
* HCL fragments can be provided on the command line so that they
can eventually replace the command line flags.
* HCL/JSON fragments are parsed into a temporary Config structure
which can be merged using reflection (all values are pointers).
The existing merge logic of overwrite for values and append
for slices has been preserved.
* A single builder process generates a typed runtime configuration
for the agent.
The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.
The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.
* Upgrade github.com/hashicorp/hcl to support int64
* improve error messages
* fix directory permission test
* Fix rtt test
* Fix ForceLeave test
* Skip performance test for now until we know what to do
* Update github.com/hashicorp/memberlist to update log prefix
* Make memberlist use the default logger
* improve config error handling
* do not fail on non-existing data-dir
* experiment with non-uniform timeouts to get a handle on stalled leader elections
* Run tests for packages separately to eliminate the spurious port conflicts
* refactor private address detection and unify approach for ipv4 and ipv6.
Fixes#2825
* do not allow unix sockets for DNS
* improve bind and advertise addr error handling
* go through builder using test coverage
* minimal update to the docs
* more coverage tests fixed
* more tests
* fix makefile
* cleanup
* fix port conflicts with external port server 'porter'
* stop test server on error
* do not run api test that change global ENV concurrently with the other tests
* Run remaining api tests concurrently
* no need for retry with the port number service
* monkey patch race condition in go-sockaddr until we understand why that fails
* monkey patch hcl decoder race condidtion until we understand why that fails
* monkey patch spurious errors in strings.EqualFold from here
* add test for hcl decoder race condition. Run with go test -parallel 128
* Increase timeout again
* cleanup
* don't log port allocations by default
* use base command arg parsing to format help output properly
* handle -dc deprecation case in Build
* switch autopilot.max_trailing_logs to int
* remove duplicate test case
* remove unused methods
* remove comments about flag/config value inconsistencies
* switch got and want around since the error message was misleading.
* Removes a stray debug log.
* Removes a stray newline in imports.
* Fixes TestACL_Version8.
* Runs go fmt.
* Adds a default case for unknown address types.
* Reoders and reformats some imports.
* Adds some comments and fixes typos.
* Reorders imports.
* add unix socket support for dns later
* drop all deprecated flags and arguments
* fix wrong field name
* remove stray node-id file
* drop unnecessary patch section in test
* drop duplicate test
* add test for LeaveOnTerm and SkipLeaveOnInt in client mode
* drop "bla" and add clarifying comment for the test
* split up tests to support enterprise/non-enterprise tests
* drop raft multiplier and derive values during build phase
* sanitize runtime config reflectively and add test
* detect invalid config fields
* fix tests with invalid config fields
* use different values for wan sanitiziation test
* drop recursor in favor of recursors
* allow dns_config.udp_answer_limit to be zero
* make sure tests run on machines with multiple ips
* Fix failing tests in a few more places by providing a bind address in the test
* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.
* Add porter to server_test.go to make tests there less flaky
* go fmt
* Added rate limiting for agent RPC calls.
* Initializes the rate limiter based on the config.
* Adds the rate limiter into the snapshot RPC path.
* Adds unit tests for the RPC rate limiter.
* Groups the RPC limit parameters under "limits" in the config.
* Adds some documentation about the RPC limiter.
* Sends a 429 response when the rate limiter kicks in.
* Adds docs for new telemetry.
* Makes snapshot telemetry look like RPC telemetry and cleans up comments.
When the metadata server is scanning the agents for potential servers
it is parsing the version number which the agent provided when it
joined. This version number has to conform to a certain format, i.e.
'n.n.n'. Without this version number properly set some tests fail with
error messages that disguise the root cause.
The default version number is currently set to 'unknown' in
version/version.go which does not parse and triggers the tests to fail.
The work around is to use a build tag 'consul' which will use the
version number set in version_base.go instead which has the correct
format and is set to the current release version.
In addition, some parts of the code also require the version number to
be of a certain value. Setting it to '0.0.0' for example makes some
tests pass and others fail since they don't pass the semantic check.
When using go build/install/test one has to remember to use '-tags
consul' or tests will fail with non-obvious error messages.
Using build tags makes the build process more complex and error prone
since it prevents the use of the plain go toolchain and - at least in
its current form - introduces subtle build and test issues. We should
try to eliminate build tags for anything else but platform specific
code.
This patch removes all references to specific version numbers in the
code and tests and sets the default version to '9.9.9' which is
syntactically correct and passes the semantic check. This solves the
issue of running go build/install/test without tags for the OSS build.
The error handling of the ACL code relies on the presence of certain
magic error messages. Since the error values are sent via RPC between
older and newer consul agents we cannot just replace the magic values
with typed errors and switch to type checks since this would break
compatibility with older clients.
Therefore, this patch moves all magic ACL error messages into the acl
package and provides default error values and helper functions which
determine the type of error.
* Moves magic check and service constants into shared structs package.
* Removes the "consul" service from local state.
Since this service is added by the leader, it doesn't really make sense to
also keep it in local state (which requires special ACLs to configure), and
requires a bunch of special cases in the local state logic. This requires
fewer special cases and makes ACL bootstrapping cleaner.
* Makes coordinate update ACL log message a warning, similar to other AE warnings.
* Adds much more detailed examples for bootstrapping ACLs.
This can hopefully replace https://gist.github.com/slackpad/d89ce0e1cc0802c3c4f2d84932fa3234.
This isn't racy, it's just a little dirty. The listen will happen and a port
will be selected and injected into the config once the Serf instance is
created, so we don't need the retry loop here.
This fixes TestServer_JoinSeparateLanAndWanAddresses which sets bogus
advertise addresses as part of the test. Port numbers uniquely identify
members since everything is running on localhost.
The sessionTimers map was secured by a lock which wasn't used
properly in the tests. This lead to data races and failing tests
when accessing the length or the members of the map.
This patch adds a separate SessionTimers struct which is safe
for concurrent use and which ecapsulates the behavior of the
sessionTimers map.
When using dynamic ports for the serf clusters then
the actual bind port of the serf WAN cluster needs to
be discovered before the serf LAN cluster is started
since the serf LAN cluster announces the port of the WAN
cluster.
This patch hides the RPC handler overwrite mechanism from the
rest of the code so that it works in all cases and that there
is no cooperation required from the tested code, i.e. we can
drop a.getEndpoint().
