Commit Graph

434 Commits

Author SHA1 Message Date
Daniel Nephin ebb851f32d agent: Remove unused Encrypted from interface
It appears to be unused. It looks like it has been around a while,
I geuss at some point we stopped using this method.
2020-03-26 12:34:31 -04:00
Daniel Nephin f994bc9157 agent: Remove xdsServer field
The field is only referenced from a single method, it can be a local var
2020-03-24 18:05:14 -04:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Pierre Souchay 49dc891737
agent: configuration reload preserves check's statuses for services (#7345)
This fixes issue #7318

Between versions 1.5.2 and 1.5.3, a regression has been introduced regarding health
of services. A patch #6144 had been issued for HealthChecks of nodes, but not for healthchecks
of services.

What happened when a reload was:

1. save all healthcheck statuses
2. cleanup everything
3. add new services with healthchecks

In step 3, the state of healthchecks was taken into account locally,
so at step 3, but since we cleaned up at step 2, state was lost.

This PR introduces the snap parameter, so step 3 can use information from step 1
2020-03-09 12:59:41 +01:00
Hans Hasselberg 2bba591906
agent: sensible keyring error (#7272)
Fixes #7231. Before an agent would always emit a warning when there is
an encrypt key in the configuration and an existing keyring stored,
which is happening on restart.

Now it only emits that warning when the encrypt key from the
configuration is not part of the keyring.
2020-02-13 20:35:09 +01:00
Akshay Ganeshen fd32016ce9
feat: support sending body in HTTP checks (#6602) 2020-02-10 09:27:12 -07:00
Freddy 67e02a0752
Add managed service provider token (#7218)
Stubs for enterprise-only ACL token to be used by managed service providers.
2020-02-04 13:58:56 -07:00
Hans Hasselberg 50281032e0
Security fixes (#7182)
* Mitigate HTTP/RPC Services Allow Unbounded Resource Usage

Fixes #7159.

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>
2020-01-31 11:19:37 -05:00
R.B. Boyer 01ebdff2a9
various tweaks on top of the hclog work (#7165) 2020-01-29 11:16:08 -06:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Kit Patella 49e9bbbdf9
Add accessorID of token when ops are denied by ACL system (#7117)
* agent: add and edit doc comments

* agent: add ACL token accessorID to debugging traces

* agent: polish acl debugging

* agent: minor fix + string fmt over value interp

* agent: undo export & fix logging field names

* agent: remove note and migrate up to code review

* Update agent/consul/acl.go

Co-Authored-By: Matt Keeler <mkeeler@users.noreply.github.com>

* agent: incorporate review feedback

* Update agent/acl.go

Co-Authored-By: R.B. Boyer <public@richardboyer.net>

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: R.B. Boyer <public@richardboyer.net>
2020-01-27 11:54:32 -08:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Hans Hasselberg e00effa325
agent: setup grpc server with auto_encrypt certs and add -https-port (#7086)
* setup grpc server with TLS config used across consul.
* add -https-port flag
2020-01-22 11:32:17 +01:00
Aestek 8c799447cf agent: remove service sidecars in Agent.cleanupRegistration (#7022)
Sidecar proxies were left behind when cleaning up after an unsuccessful
registration. There are now also removed when the service is cleanup up.
2020-01-20 14:01:40 +01:00
Hans Hasselberg b6c83e06d5
auto_encrypt: set dns and ip san for k8s and provide configuration (#6944)
* Add CreateCSRWithSAN
* Use CreateCSRWithSAN in auto_encrypt and cache
* Copy DNSNames and IPAddresses to cert
* Verify auto_encrypt.sign returns cert with SAN
* provide configuration options for auto_encrypt dnssan and ipsan
* rename CreateCSRWithSAN to CreateCSR
2020-01-17 23:25:26 +01:00
Aestek 9329cbac0a Add support for dual stack IPv4/IPv6 network (#6640)
* Use consts for well known tagged adress keys

* Add ipv4 and ipv6 tagged addresses for node lan and wan

* Add ipv4 and ipv6 tagged addresses for service lan and wan

* Use IPv4 and IPv6 address in DNS
2020-01-17 09:54:17 -05:00
Matej Urbas d877e091d6 agent: configurable MaxQueryTime and DefaultQueryTime. (#3777) 2020-01-17 14:20:57 +01:00
Matt Keeler 6de4eb8569
OSS changes for implementing token based namespace inferencing
remove debug log
2019-12-18 14:07:08 -05:00
Matt Keeler 442924c35a
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Hans Hasselberg a36e58c964
agent: fewer file local differences between enterprise and oss (#6820) (#6898)
* Increase number to test ignore. Consul Enterprise has more flags and since we are trying to reduce the differences between both code bases, we are increasing the number in oss. The semantics don't change, it is just a cosmetic thing.
* Introduce agent.initEnterprise for enterprise related hooks.
* Sync test with ent version.
* Fix import order.
* revert error wording.
2019-12-06 21:35:58 +01:00
Sarah Adams 1f5b333290
give feedback to CLI user on forceleave command if node does not exist (#6841) 2019-12-02 11:06:15 -08:00
Matt Keeler 036ab56f17
Track the correct check id for idempotent service/check updates 2019-11-14 11:30:44 -05:00
Sarah Christoff 86b30bbfbe
Set MinQuorum variable in Autopilot (#6654)
* Add MinQuorum to Autopilot
2019-10-29 09:04:41 -05:00
Freddy caf658d0d3
Store check type in catalog (#6561) 2019-10-17 20:33:11 +02:00
PHBourquin 16ca8340c1 Checks to passing/critical only after reaching a consecutive success/failure threshold (#5739)
A check may be set to become passing/critical only if a specified number of successive
checks return passing/critical in a row. Status will stay identical as before until
the threshold is reached.
This feature is available for HTTP, TCP, gRPC, Docker & Monitor checks.
2019-10-14 21:49:49 +01:00
Sarah Christoff 9b93dd93c9
Prune Unhealthy Agents (#6571)
* Add -prune flag to ForceLeave
2019-10-04 16:10:02 -05:00
Freddy 5eace88ce2
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer 682b5370c9
agent: tolerate more failure scenarios during service registration with central config enabled (#6472)
Also:

* Finished threading replaceExistingChecks setting (from GH-4905)
  through service manager.

* Respected the original configSource value that was used to register a
  service or a check when restoring persisted data.

* Run several existing tests with and without central config enabled
  (not exhaustive yet).

* Switch to ioutil.ReadFile for all types of agent persistence.
2019-09-24 10:04:48 -05:00
Aestek 19c4459d19 Add option to register services and their checks idempotently (#4905) 2019-09-02 09:38:29 -06:00
Alvin Huang e4e9381851
revert commits on master (#6413) 2019-08-27 17:45:58 -04:00
tradel b0bbcd8b94 add domain and nodeName to agent cert request 2019-08-27 14:11:40 -07:00
R.B. Boyer 0c5409d172
test: fix TestAgent.Start() to not segfault if the DNSServer cannot ListenAndServe (#6409)
The embedded `Server` field on a `DNSServer` is only set inside of the
`ListenAndServe` method. If that method fails for reasons like the
address being in use and is not bindable, then the `Server` field will
not be set and the overall `Agent.Start()` will fail.

This will trigger the inner loop of `TestAgent.Start()` to invoke
`ShutdownEndpoints` which will attempt to pretty print the DNS servers
using fields on that inner `Server` field. Because it was never set,
this causes a nil pointer dereference and crashes the test.
2019-08-27 10:45:05 -05:00
Mike Morris 88df658243
connect: remove managed proxies (#6220)
* connect: remove managed proxies implementation and all supporting config options and structs

* connect: remove deprecated ProxyDestination

* command: remove CONNECT_PROXY_TOKEN env var

* agent: remove entire proxyprocess proxy manager

* test: remove all managed proxy tests

* test: remove irrelevant managed proxy note from TestService_ServerTLSConfig

* test: update ContentHash to reflect managed proxy removal

* test: remove deprecated ProxyDestination test

* telemetry: remove managed proxy note

* http: remove /v1/agent/connect/proxy endpoint

* ci: remove deprecated test exclusion

* website: update managed proxies deprecation page to note removal

* website: remove managed proxy configuration API docs

* website: remove managed proxy note from built-in proxy config

* website: add note on removing proxy subdirectory of data_dir
2019-08-09 15:19:30 -04:00
Alvin Huang 5b6fa58453 resolve circleci config conflicts 2019-07-23 20:18:36 -04:00
Paul Banks 42296292a4
Allow raft TrailingLogs to be configured. (#6186)
This fixes pathological cases where the write throughput and snapshot size are both so large that more than 10k log entries are written in the time it takes to restore the snapshot from disk. In this case followers that restart can never catch up with leader replication again and enter a loop of constantly downloading a full snapshot and restoring it only to find that snapshot is already out of date and the leader has truncated its logs so a new snapshot is sent etc.

In general if you need to adjust this, you are probably abusing Consul for purposes outside its design envelope and should reconsider your usage to reduce data size and/or write volume.
2019-07-23 15:19:57 +01:00
Alvin Huang 17654c6292 Merge branch 'master' into release/1-6 2019-07-17 15:43:30 -04:00
R.B. Boyer 4c05f1f519
agent: avoid reverting any check updates that occur while a service is being added or the config is reloaded (#6144) 2019-07-17 14:06:50 -05:00
Matt Keeler fc27eb973a Implement caching for config entry lists
Update agent/cache-types/config_entry.go

Co-Authored-By: R.B. Boyer <public@richardboyer.net>
2019-07-02 10:11:19 -04:00
R.B. Boyer bccbb2b4ae
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Matt Keeler 24749bc7e5 Implement Kind based ServiceDump and caching of the ServiceDump RPC 2019-07-01 16:28:30 -04:00
hashicorp-ci e36792395e Merge Consul OSS branch 'master' at commit e91f73f59249f5756896b10890e9298e7c1fbacc 2019-06-30 02:00:31 +00:00
Hans Hasselberg 73c4e9f07c
tls: auto_encrypt enables automatic RPC cert provisioning for consul clients (#5597) 2019-06-27 22:22:07 +02:00
hashicorp-ci 3224bea082 Merge Consul OSS branch 'master' at commit 4eb73973b6e53336fd505dc727ac84c1f7e78872 2019-06-27 02:00:41 +00:00
Pierre Souchay e394a9469b Support for maximum size for Output of checks (#5233)
* Support for maximum size for Output of checks

This PR allows users to limit the size of output produced by checks at the agent 
and check level.

When set at the agent level, it will limit the output for all checks monitored
by the agent.

When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.

Default value is 4k, and input must be at least 1.
2019-06-26 09:43:25 -06:00
hashicorp-ci d237e86d83 Merge Consul OSS branch 'master' at commit 88b15d84f9fdb58ceed3dc971eb0390be85e3c15
skip-checks: true
2019-06-25 02:00:26 +00:00
Matt Keeler f0f28707bc
New Cache Types (#5995)
* Add a cache type for the Catalog.ListServices endpoint

* Add a cache type for the Catalog.ListDatacenters endpoint
2019-06-24 14:11:34 -04:00
Hans Hasselberg 0d8d7ae052
agent: transfer leadership when establishLeadership fails (#5247) 2019-06-19 14:50:48 +02:00
Pierre Souchay 1da1825056 Ensure Consul is IPv6 compliant (#5468) 2019-06-04 10:02:38 -04:00
Pierre Souchay 27207fdaed agent: Improve startup message to avoid confusing users when no error occurs (#5896)
* Improve startup message to avoid confusing users when no error occurs

Several times, some users not very familiar with Consul get confused
by error message at startup:

  `[INFO] agent: (LAN) joined: 1 Err: <nil>`

Having `Err: <nil>` seems weird to many users, I propose to have the
following instead:

* Success: `[INFO] agent: (LAN) joined: 1`
* Error:   `[WARN] agent: (LAN) couldn't join: %d Err: ERROR`
2019-05-24 16:50:18 +02:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
Matt Keeler 3ea9fe3bff
Implement bootstrapping proxy defaults from the config file (#5714) 2019-04-26 14:25:03 -04:00
Matt Keeler 2831c8993d
Move the watch package into the api module (#5664)
* Move the watch package into the api module

It was already just a thin wrapper around the API anyways. The biggest change was to the testing. Instead of using a test agent directly from the agent package it now uses the binary on the PATH just like the other API tests.

The other big changes were to fix up the connect based watch tests so that we didn’t need to pull in the connect package (and therefore all of Consul)
2019-04-26 12:33:01 -04:00
Kyle Havlovitz 83952c8a3d
Merge pull request #5700 from hashicorp/service-reg-manager
Use centralized service config on agent service registrations
2019-04-25 06:39:50 -07:00
Kyle Havlovitz a113d8ca1f Test an index=0 value in cache.Notify 2019-04-25 02:11:07 -07:00
Aestek 6762eeb03c Add support for DNS config hot-reload (#4875)
The DNS config parameters `recursors` and `dns_config.*` are now hot
reloaded on SIGHUP or `consul reload` and do not need an agent restart
to be modified.
Config is stored in an atomic.Value and loaded at the beginning of each
request. Reloading only affects requests that start _after_ the
reload. Ongoing requests are not affected. To match the current
behavior the recursor handler is loaded and unloaded as needed on config
reload.
2019-04-24 14:11:54 -04:00
Kyle Havlovitz c02716ac2c Fix a race in the ready logic 2019-04-24 06:48:11 -07:00
Kyle Havlovitz 1fc96c770b Make central service config opt-in and rework the initial registration 2019-04-24 06:11:08 -07:00
Kyle Havlovitz 6faa8ba451 Fill out the service manager functionality and fix tests 2019-04-23 00:17:28 -07:00
Kyle Havlovitz 6aa022c1cd Add the service registration manager to the agent 2019-04-23 00:17:27 -07:00
Pierre Souchay 8f0fe5a00a Ensure we remove Connect proxy before deregistering the service itself (#5482)
This will fix https://github.com/hashicorp/consul/issues/5351
2019-03-15 20:14:46 +00:00
Valentin Fritz 0fde90b172 Fix checks removal when removing service (#5457)
Fix my recently discovered issue described here: #5456
2019-03-14 11:02:49 -04:00
Hans Hasselberg d511e86491
agent: enable reloading of tls config (#5419)
This PR introduces reloading tls configuration. Consul will now be able to reload the TLS configuration which previously required a restart. It is not yet possible to turn TLS ON or OFF with these changes. Only when TLS is already turned on, the configuration can be reloaded. Most importantly the certificates and CAs.
2019-03-13 10:29:06 +01:00
R.B. Boyer 91e78e00c7
fix typos reported by golangci-lint:misspell (#5434) 2019-03-06 11:13:28 -06:00
Aestek 2ce7240abc Register and deregisters services and their checks atomically in the local state (#5012)
Prevent race between register and deregister requests by saving them
together in the local state on registration.
Also adds more cleaning in case of failure when registering services
/ checks.
2019-03-04 09:34:05 -05:00
Matt Keeler 0c76a4389f
ACL Token Persistence and Reloading (#5328)
This PR adds two features which will be useful for operators when ACLs are in use.

1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)

Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.

Some other secondary changes:

* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. 
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
2019-02-27 14:28:31 -05:00
Hans Hasselberg c6ad6daa09
Centralise tls configuration part 2 (#5374)
This PR is based on #5366 and continues to centralise the tls configuration in order to be reloadable eventually!

This PR is another refactoring. No tests are changed, beyond calling other functions or cosmetic stuff. I added a bunch of tests, even though they might be redundant.
2019-02-27 10:14:59 +01:00
Hans Hasselberg 75ababb54f
Centralise tls configuration part 1 (#5366)
In order to be able to reload the TLS configuration, we need one way to generate the different configurations.

This PR introduces a `tlsutil.Configurator` which holds a `tlsutil.Config`. Afterwards it is responsible for rendering every `tls.Config`. In this particular PR I moved `IncomingHTTPSConfig`, `IncomingTLSConfig`, and `OutgoingTLSWrapper` into `tlsutil.Configurator`.

This PR is a pure refactoring - not a single feature added. And not a single test added. I only slightly modified existing tests as necessary.
2019-02-26 16:52:07 +01:00
Aestek f8a28d13dd Allow DNS interface to use agent cache (#5300)
Adds two new configuration parameters "dns_config.use_cache" and
"dns_config.cache_max_age" controlling how DNS requests use the agent
cache when querying servers.
2019-02-25 14:06:01 -05:00
R.B. Boyer 2bb7e19e8b
agent: only enable TLS on gRPC if the HTTPS API port is enabled (#5287)
Currently the gRPC server assumes that if you have configured TLS
certs on the agent (for RPC) that you want gRPC to be encrypted.
If gRPC is bound to localhost this can be overkill. For the API we
let the user choose to offer HTTP or HTTPS API endpoints
independently of the TLS cert configuration for a similar reason.

This setting will let someone encrypt RPC traffic with TLS but avoid
encrypting local gRPC traffic if that is what they want to do by only
enabling TLS on gRPC if the HTTPS API port is enabled.
2019-02-13 11:49:54 -06:00
R.B. Boyer c11c0ea924
Merge pull request #5237 from hashicorp/term-grpc-stream-on-token-failure
Check ACLs more often for xDS endpoints.
2019-01-29 14:52:26 -06:00
Paul Banks 1c4dfbcd2e
connect: tame thundering herd of CSRs on CA rotation (#5228)
* Support rate limiting and concurrency limiting CSR requests on servers; handle CA rotations gracefully with jitter and backoff-on-rate-limit in client

* Add CSR rate limiting docs

* Fix config naming and add tests for new CA configs
2019-01-22 17:19:36 +00:00
R.B. Boyer 6d76b137ba Check ACLs more often for xDS endpoints.
For established xDS gRPC streams recheck ACLs for each DiscoveryRequest
or DiscoveryResponse. If more than 5 minutes has elapsed since the last
ACL check, recheck even without an incoming DiscoveryRequest or
DiscoveryResponse. ACL failures will terminate the stream.
2019-01-22 11:12:40 -06:00
Paul Banks c4fa66b4c9
connect: agent leaf cert caching improvements (#5091)
* Add State storage and LastResult argument into Cache so that cache.Types can safely store additional data that is eventually expired.

* New Leaf cache type working and basic tests passing. TODO: more extensive testing for the Root change jitter across blocking requests, test concurrent fetches for different leaves interact nicely with rootsWatcher.

* Add multi-client and delayed rotation tests.

* Typos and cleanup error handling in roots watch

* Add comment about how the FetchResult can be used and change ca leaf state to use a non-pointer state.

* Plumb test override of root CA jitter through TestAgent so that tests are deterministic again!

* Fix failing config test
2019-01-10 12:46:11 +00:00
Paul Banks fcdb5b3494
agent: add default weights to service in local state to prevent AE churn (#5126)
* Add default weights when adding a service with no weights to local state to prevent constant AE re-sync.

This fix was contributed by @42wim in https://github.com/hashicorp/consul/pull/5096 but was merged against the wrong base. This adds it to master and adds a test to cover the behaviour.

* Fix tests that broke due to comparing internal state which now has default weights
2019-01-08 10:13:49 +00:00
Aestek eba1dd7856 Prevent status flap when re-registering a check (#4904)
Fixes point `#2` of: https://github.com/hashicorp/consul/issues/4903

When registering a service each healthcheck status is saved and restored (https://github.com/hashicorp/consul/blob/master/agent/agent.go#L1914) to avoid unnecessary flaps in health state.
This change extends this feature to single check registration by moving this protection in `AddCheck()` so that both `PUT /v1/agent/service/register` and `PUT /v1/agent/check/register` behave in the same idempotent way.

#### Steps to reproduce
1. Register a check :
```
curl -X PUT \
  http://127.0.0.1:8500/v1/agent/check/register \
  -H 'Content-Type: application/json' \
  -d '{
  "Name": "my_check",
  "ServiceID": "srv",
  "Interval": "10s",
  "Args": ["true"]
}'
```
2. The check will initialize and change to `passing`
3. Run the same request again
4. The check status will quickly go from `critical` to `passing` (the delay for this transission is determined by https://github.com/hashicorp/consul/blob/master/agent/checks/check.go#L95)
2019-01-07 13:53:03 -05:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Kyle Havlovitz 96a35f8abc re-add Connect multi-dc config changes
This reverts commit 8bcfbaffb6588b024cd1a3cf0952e6bfa7d9e900.
2018-10-19 08:41:03 -07:00
Jack Pearkes 847a0a5266 Revert "Connect multi-dc config" (#4784) 2018-10-11 17:32:45 +01:00
Aestek 260a9880ae [Security] Add finer control over script checks (#4715)
* Add -enable-local-script-checks options

These options allow for a finer control over when script checks are enabled by
giving the option to only allow them when they are declared from the local
file system.

* Add documentation for the new option

* Nitpick doc wording
2018-10-11 13:22:11 +01:00
Paul Banks 94332edf2e
[WIP] Initial draft of Sidecar Service and Managed Proxy deprecation docs (#4752)
* Initial draft of Sidecar Service and Managed Proxy deprecation docs

* Service definition deprecation notices and sidecar service

* gRPC and sidecar service config options; Deprecate managed proxy options

* Envoy Docs: Basic envoy command; envoy getting started/intro

* Remove change that snuck in

* Envoy custom config example

* Add agent/service API docs; deprecate proxy config endpoint

* Misc grep cleanup for managed proxies; capitalize Envoy

* Updates to getting started guide

* Add missing link

* Refactor Envoy guide into a separate guide and add bootstrap reference notes.

* Add limitations to Envoy docs; Highlight no fixes for known managed proxy issues on deprecation page; clarify snake cae stuff; Sidecar Service lifecycle
2018-10-11 10:44:42 +01:00
Kyle Havlovitz 5b98a602af agent: add primary_datacenter and connect replication config options 2018-10-10 12:17:59 -07:00
Kyle Havlovitz 475afd0300 docs: deprecate acl_datacenter and replace it with primary_datacenter 2018-10-10 12:16:47 -07:00
Paul Banks 7a8023a57f Fix up tests broken by master merge; add proxy tests to services command (and fix it!); actually run the proxycfg.Manager 2018-10-10 16:55:34 +01:00
Paul Banks 1e4c5a1811 Connect Envoy Command (#4735)
* Plumb xDS server and proxyxfg into the agent startup

* Add `consul connect envoy` command to allow running Envoy as a connect sidecar.

* Add test for help tabs; typos and style fixups from review
2018-10-10 16:55:34 +01:00
Paul Banks 979e1c9c94 Add -sidecar-for and new /agent/service/:service_id endpoint (#4691)
- A new endpoint `/v1/agent/service/:service_id` which is a generic way to look up the service for a single instance. The primary value here is that it:
   - **supports hash-based blocking** and so;
   - **replaces `/agent/connect/proxy/:proxy_id`** as the mechanism the built-in proxy uses to read its config.
   - It's not proxy specific and so works for any service.
   - It has a temporary shim to call through to the existing endpoint to preserve current managed proxy config defaulting behaviour until that is removed entirely (tested).
 - The built-in proxy now uses the new endpoint exclusively for it's config
 - The built-in proxy now has a `-sidecar-for` flag that allows the service ID of the _target_ service to be specified, on the condition that there is exactly one "sidecar" proxy (that is one that has `Proxy.DestinationServiceID` set) for the service registered.
 - Several fixes for edge cases for SidecarService
 - A fix for `Alias` checks - when running locally they didn't update their state until some external thing updated the target. If the target service has no checks registered as below, then the alias never made it past critical.
2018-10-10 16:55:34 +01:00
Paul Banks 7038fe6b71 Add SidecarService Syntax sugar to Service Definition (#4686)
* Added new Config for SidecarService in ServiceDefinitions.

* WIP: all the code needed for SidecarService is written... none of it is tested other than config :). Need API updates too.

* Test coverage for the new sidecarServiceFromNodeService method.

* Test API registratrion with SidecarService

* Recursive Key Translation 🤦

* Add tests for nested sidecar defintion arrays to ensure they are translated correctly

* Use dedicated internal state rather than Service Meta for tracking sidecars for deregistration.

Add tests for deregistration.

* API struct for agent register. No other endpoint should be affected yet.

* Additional test cases to cover updates to API registrations
2018-10-10 16:55:34 +01:00
Paul Banks bed72f6078 Rename proxy package (re-run of #4550) (#4638)
* Rename agent/proxy package to reflect that it is limited to managed proxy processes

Rationale: we have several other components of the agent that relate to Connect proxies for example the ProxyConfigManager component needed for Envoy work. Those things are pretty separate from the focus of this package so far which is only concerned with managing external proxy processes so it's nota good fit to put code for that in here, yet there is a naming clash if we have other packages related to proxy functionality that are not in the `agent/proxy` package.

Happy to bikeshed the name. I started by calling it `managedproxy` but `managedproxy.Manager` is especially unpleasant. `proxyprocess` seems good in that it's more specific about purpose but less clearly connected with the concept of "managed proxies". The names in use are cleaner though e.g. `proxyprocess.Manager`.

This rename was completed automatically using golang.org/x/tools/cmd/gomvpkg.

Depends on #4541

* Fix missed windows tagged files
2018-10-10 16:55:34 +01:00
Paul Banks 5b0d4db6bc Support Agent Caching for Service Discovery Results (#4541)
* Add cache types for catalog/services and health/services and basic test that caching works

* Support non-blocking cache types with Cache-Control semantics.

* Update API docs to include caching info for every endpoint.

* Comment updates per PR feedback.

* Add note on caching to the 10,000 foot view on the architecture page to make the new data path more clear.

* Document prepared query staleness quirk and force all background requests to AllowStale so we can spread service discovery load across servers.
2018-10-10 16:55:34 +01:00
Paul Banks 77e0577ff6
Add a Close method to cache that stops background goroutines. (#4746)
In a real agent the `cache` instance is alive until the agent shuts down so this is not a real leak in production, however in out test suite, every testAgent that is started and stops leaks goroutines that never get cleaned up which accumulate consuming CPU and memory through subsequent test in the `agent` package which doesn't help our test flakiness.

This adds a Close method that doesn't invalidate or clean up the cache, and still allows concurrent blocking queries to run (for up to 10 mins which might still affect tests). But at least it doesn't maintain them forever with background refresh and an expiry watcher routine.

It would be nice to cancel any outstanding blocking requests as well when we close but that requires much more invasive surgery right into our RPC protocol since we don't have a way to cancel requests currently.

Unscientifically this seems to make tests pass a bit quicker and more reliably locally but I can't really be sure of that!
2018-10-04 11:27:11 +01:00
Hans Hasselberg 318bcb9bbb
Allow disabling the HTTP API again. (#4655)
If you provide an invalid HTTP configuration consul will still start again instead of failing. But if you do so the build-in proxy won't be able to start which you might need for connect.
2018-09-13 16:06:04 +02:00
Pierre Souchay 508b67c32a Ensure that Proxies ARE always cleaned up, event with DeregisterCriticalServiceAfter (#4649)
This fixes https://github.com/hashicorp/consul/issues/4648
2018-09-11 17:34:09 +01:00
Matt Keeler 61a5c965c9
Ensure that errors setting up the DNS servers get propagated back to the shell (#4598)
Fixes: #4578 

Prior to this fix if there was an error binding to ports for the DNS servers the error would be swallowed by the gated log writer and never output. This fix propagates the DNS server errors back to the shell with a multierror.
2018-09-07 10:48:29 -04:00
Matt Keeler da3ed5dc76
Fix #4515: Segfault when serf_wan port was -1 but reconnect_time_wan was set (#4531)
Fixes #4515 

This just slightly refactors the logic to only attempt to set the serf wan reconnect timeout when the rest of the serf wan settings are configured - thus avoiding a segfault.
2018-08-17 14:44:25 -04:00
Matt Keeler 5c7c58ed26
Gossip tuneables (#4444)
Expose a few gossip tuneables for both lan and wan interfaces

gossip_nodes
gossip_interval
probe_timeout
probe_interval
retransmit_mult
suspicion_mult
2018-07-26 11:39:49 -04:00
Mitchell Hashimoto 5c42dacef4
Merge pull request #4320 from hashicorp/f-alias-check
Add "Alias" Check Type
2018-07-20 13:01:33 -05:00
Matt Keeler 95e8f795df Use the agent logger instead of log module 2018-07-19 11:22:01 -04:00
Matt Keeler 953b72318f Persist proxies from config files
Also change how loadProxies works. Now it will load all persisted proxies into a map, then when loading config file proxies will look up the previous proxy token in that map.
2018-07-18 17:04:35 -04:00
Matt Keeler 9f8991e0cc Fix issue with choosing a client addr that is 0.0.0.0 or :: 2018-07-16 16:30:15 -04:00
Mitchell Hashimoto 65bbc12d69
agent: use the correct ACL token for alias checks 2018-07-12 10:17:53 -07:00
Mitchell Hashimoto 99ead8324f
agent: alias checks have no interval 2018-07-12 09:36:11 -07:00
Mitchell Hashimoto 75ea0a1ee7
agent: run alias checks 2018-07-12 09:36:10 -07:00
Paul Banks 6fe7faa554
Merge pull request #4381 from hashicorp/proxy-check-default
Proxy check default
2018-07-12 17:08:35 +01:00
Matt Keeler 0a365b1a4f
Merge pull request #4374 from hashicorp/feature/proxy-env-vars
Setup managed proxy environment with API client env vars
2018-07-12 09:13:54 -04:00
Paul Banks 9223102331
Default managed proxy TCP check address sanely when proxy is bound to 0.0.0.0.
This also provides a mechanism to configure custom address or disable the check entirely from managed proxy config.
2018-07-12 12:57:10 +01:00
Matt Keeler 1e5e9fd8cd PR Updates
Proxy now doesn’t need to know anything about the api as we pass env vars to it instead of the api config.
2018-07-11 09:44:54 -04:00
Matt Keeler 358e6c8f6a Pass around an API Config object and convert to env vars for the managed proxy 2018-07-10 12:13:51 -04:00
Matt Keeler 115893b7d8 Remove https://prefix from TLSConfig.Address 2018-07-09 12:31:15 -04:00
mkeeler 1da3c42867 Merge remote-tracking branch 'connect/f-connect' 2018-06-25 19:42:51 +00:00
Mitchell Hashimoto 54ad6fc050 agent: convert the proxy bind_port to int if it is a float 2018-06-25 12:26:18 -07:00
Paul Banks 1d6e1ace11 register TCP check for managed proxies 2018-06-25 12:25:40 -07:00
Paul Banks d1810ba338 Make proxy only listen after initial certs are fetched 2018-06-25 12:25:40 -07:00
Paul Banks 42e28fa4d1 Limit proxy telemetry config to only be visible with authenticated with a proxy token 2018-06-25 12:25:39 -07:00
Paul Banks ca68136ac7 Refactor to use embedded struct. 2018-06-25 12:25:39 -07:00
Paul Banks 2df422e1e5 Disable TestAgent proxy execution properly 2018-06-25 12:25:38 -07:00
Mitchell Hashimoto 0d457a3e71 agent: RemoveProxy also removes the proxy service 2018-06-25 12:25:12 -07:00
Mitchell Hashimoto c30affa4b6 agent/proxy: AllowRoot to disable executing managed proxies when root 2018-06-25 12:25:11 -07:00
Paul Banks d0674cdd7a Warn about killing proxies in dev mode 2018-06-25 12:24:16 -07:00
Paul Banks d140612350 Fixs a few issues that stopped this working in real life but not caught by tests:
- Dev mode assumed no persistence of services although proxy state is persisted which caused proxies to be killed on startup as their services were no longer registered. Fixed.
 - Didn't snapshot the ProxyID which meant that proxies were adopted OK from snapshot but failed to restart if they died since there was no proxyID in the ENV on restart
 - Dev mode with no persistence just kills all proxies on shutdown since it can't recover them later
 - Naming things
2018-06-25 12:24:14 -07:00
Paul Banks 3df45ac7f1 Don't kill proxies on agent shutdown; backport manager close fix 2018-06-25 12:24:13 -07:00
Paul Banks 3bac52480e Abandon daemonize for simpler solution (preserving history):
Reverts:
  - bdb274852ae469c89092d6050697c0ff97178465
  - 2c689179c4f61c11f0016214c0fc127a0b813bfe
  - d62e25c4a7ab753914b6baccd66f88ffd10949a3
  - c727ffbcc98e3e0bf41e1a7bdd40169bd2d22191
  - 31b4d18933fd0acbe157e28d03ad59c2abf9a1fb
  - 85c3f8df3eabc00f490cd392213c3b928a85aa44
2018-06-25 12:24:10 -07:00
Paul Banks 9cea27c66e Sanity check that we are never trying to self-exec a test binary. Add daemonize bypass for TestAgent so that we don't have to jump through ridiculous self-execution hooks for every package that might possibly invoke a managed proxy 2018-06-25 12:24:09 -07:00
Paul Banks c97db00903 Run daemon processes as a detached child.
This turns out to have a lot more subtelty than we accounted for. The test suite is especially prone to races now we can only poll the child and many extra levels of indirectoin are needed to correctly run daemon process without it becoming a Zombie.

I ran this test suite in a loop with parallel enabled to verify for races (-race doesn't find any as they are logical inter-process ones not actual data races). I made it through ~50 runs before hitting an error due to timing which is much better than before. I want to go back and see if we can do better though. Just getting this up.
2018-06-25 12:24:08 -07:00
Paul Banks 3a00574a13 Persist proxy state through agent restart 2018-06-25 12:24:08 -07:00
Mitchell Hashimoto 9249662c6c
agent: leaf endpoint accepts name, not service ID
This change is important so that requests can made representing a
service that may not be registered with the same local agent.
2018-06-14 09:42:20 -07:00
Paul Banks bd5e569dc7
Make invalid clusterID be fatal 2018-06-14 09:42:17 -07:00
Paul Banks 834ed1d25f
Fixed many tests after rebase. Some still failing and seem unrelated to any connect changes. 2018-06-14 09:42:16 -07:00
Mitchell Hashimoto c42510e1ec
agent/cache: implement refresh backoff 2018-06-14 09:42:14 -07:00
Mitchell Hashimoto b4f990bc6c
agent: verify local proxy tokens for CA leaf + tests 2018-06-14 09:42:14 -07:00
Mitchell Hashimoto 8f7b5f93cd
agent: verify proxy token for ProxyConfig endpoint + tests 2018-06-14 09:42:14 -07:00
Mitchell Hashimoto 1dfb4762f5
agent: increase timer for blocking cache endpoints 2018-06-14 09:42:12 -07:00
Mitchell Hashimoto 7bb13246a8
agent: clarify why we Kill still 2018-06-14 09:42:12 -07:00
Mitchell Hashimoto 147b066c67
agent: restore proxy snapshot but still Kill proxies 2018-06-14 09:42:12 -07:00
Mitchell Hashimoto 4301f7f1f5
agent: only set the proxy manager data dir if its set 2018-06-14 09:42:12 -07:00
Mitchell Hashimoto 5e0f0ba178
agent/proxy: write pid file whenever the daemon process changes 2018-06-14 09:42:11 -07:00
Mitchell Hashimoto 49bc7181a4
agent/proxy: send logs to the correct location for daemon proxies 2018-06-14 09:42:10 -07:00
Mitchell Hashimoto 52665f7d23
agent: clean up defaulting of proxy configuration
This cleans up and unifies how proxy settings defaults are applied.
2018-06-14 09:42:10 -07:00
Mitchell Hashimoto bae428326a
agent: use os.Executable 2018-06-14 09:42:09 -07:00
Mitchell Hashimoto 4722e3ef76
agent: fix crash that could happen if proxy was nil on load 2018-06-14 09:42:09 -07:00
Mitchell Hashimoto 669268f85c
agent: start proxy manager 2018-06-14 09:42:09 -07:00
Mitchell Hashimoto a2167a7fd1
agent/proxy: manager and basic tests, not great coverage yet coming soon 2018-06-14 09:42:08 -07:00
Mitchell Hashimoto f64a002f68
agent: start/stop proxies 2018-06-14 09:42:08 -07:00
Paul Banks dcd277de8a
Wire up agent leaf endpoint to cache framework to support blocking. 2018-06-14 09:42:07 -07:00
Paul Banks 153808db7c
Don't allow connect watches in agent/cli yet 2018-06-14 09:42:06 -07:00
Kyle Havlovitz 2167713226
Add CA config to connect section of agent config 2018-06-14 09:42:05 -07:00
Mitchell Hashimoto 73838c9afa
agent: use helper/retry instead of timing related tests 2018-06-14 09:42:04 -07:00
Mitchell Hashimoto dcb2671d10
agent/cache: address PR feedback, lots of typos 2018-06-14 09:42:03 -07:00
Mitchell Hashimoto a1f8cb9570
agent: augment /v1/connect/authorize to cache intentions 2018-06-14 09:42:02 -07:00
Mitchell Hashimoto 8bb4fd95a6
agent: initialize the cache and cache the CA roots 2018-06-14 09:42:00 -07:00
Paul Banks aed5e5b03e
Super ugly hack to get TeamCity build to work for this PR without adding a vendor that is being added elsewhere and will conflict... 2018-06-14 09:41:58 -07:00
Paul Banks cbd8606651
Add X-Consul-ContentHash header; implement removing all proxies; add load/unload test. 2018-06-14 09:41:57 -07:00
Paul Banks c2266b134a
HTTP agent registration allows proxy to be defined. 2018-06-14 09:41:57 -07:00
Paul Banks 78e48fd547
Added connect proxy config and local agent state setup on boot. 2018-06-14 09:41:57 -07:00
Matt Keeler f9d0323c0b Fixup a weird merge problem 2018-06-11 16:27:39 -04:00
Matt Keeler c5d9c2362f Merge branch 'master' of github.com:hashicorp/consul into rpc-limiting
# Conflicts:
#	agent/agent.go
#	agent/consul/client.go
2018-06-11 16:11:36 -04:00
Matt Keeler c589991452 Apply the limits to the clients rpcLimiter 2018-06-11 15:51:17 -04:00
Matt Keeler e043621dd3
Merge pull request #4156 from hashicorp/enterprise-coexistence
Enterprise/Licensing Cleanup
2018-06-05 10:50:32 -04:00
Matt Keeler 4858aa6be4 Add RunWithConfig and put Run signature back to normal 2018-05-31 20:22:14 -04:00
Matt Keeler 365e8d11ee Allow passing in a config to the watch plan to use when creating the API client
This allows watches from consul agent config (rather than consul watch command) to be able to utilize HTTPs
2018-05-31 17:07:36 -04:00
Matt Keeler 14661a417b Allow for easy enterprise/oss coexistence
Uses struct/interface embedding with the embedded structs/interfaces being empty for oss. Also methods on the server/client types are defaulted to do nothing for OSS
2018-05-24 10:36:42 -04:00
Preetha Appan e28c5fbb4e
Also make snapshot interval configurable 2018-05-11 10:43:24 -05:00
Preetha Appan eb4bc79118
Make raft snapshot commit threshold configurable 2018-05-11 10:43:24 -05:00
Kyle Havlovitz a480434517
Remove the script field from checks in favor of args 2018-05-08 15:31:53 -07:00
Jared Wasinger 9a1737a5f0 agent: reload limits upon restart 2018-04-08 14:28:29 -07:00
runsisi 2f09d10df5 minor fix for endpoints shutdown
Signed-off-by: runsisi <runsisi@zte.com.cn>
2018-03-29 21:45:46 +08:00
Matt Keeler b5cdbbd033
Merge pull request #3990 from hashicorp/b-gh-3854
Warn when node name isnt a valid DNS label
2018-03-29 09:04:47 -04:00
Preetha f91db69d6e
Merge pull request #3984 from hashicorp/f-allow-federation-disable
Allows disabling WAN federation by setting serf WAN port to -1
2018-03-27 16:05:53 -05:00
Matt Keeler fd9297ad8f Formatting update 2018-03-27 16:31:27 -04:00
Preetha Appan 17a011b9bd
fix typo and remove comment 2018-03-27 14:28:05 -05:00
Matt Keeler 2d8a68cce9 GH-3854: Warn when node name isnt a valid DNS label 2018-03-27 15:00:33 -04:00
Preetha Appan 512f9a50fc
Allows disabling WAN federation by setting serf WAN port to -1 2018-03-26 14:21:06 -05:00
Guido Iaquinti 244fc72b05 Add package name to log output 2018-03-21 15:56:14 +00:00
Josh Soref 1dd8c378b9 Spelling (#3958)
* spelling: another

* spelling: autopilot

* spelling: beginning

* spelling: circonus

* spelling: default

* spelling: definition

* spelling: distance

* spelling: encountered

* spelling: enterprise

* spelling: expands

* spelling: exits

* spelling: formatting

* spelling: health

* spelling: hierarchy

* spelling: imposed

* spelling: independence

* spelling: inspect

* spelling: last

* spelling: latest

* spelling: client

* spelling: message

* spelling: minimum

* spelling: notify

* spelling: nonexistent

* spelling: operator

* spelling: payload

* spelling: preceded

* spelling: prepared

* spelling: programmatically

* spelling: required

* spelling: reconcile

* spelling: responses

* spelling: request

* spelling: response

* spelling: results

* spelling: retrieve

* spelling: service

* spelling: significantly

* spelling: specifies

* spelling: supported

* spelling: synchronization

* spelling: synchronous

* spelling: themselves

* spelling: unexpected

* spelling: validations

* spelling: value
2018-03-19 16:56:00 +00:00
James Phillips 5b245c0201
Merge pull request #3845 from 42wim/tagfix
Fix service tags not added to health check. Part two
2018-02-05 16:18:00 -08:00
James Phillips 0aa05cc5f0
Merge pull request #3855 from hashicorp/pr-3782-slackpad
Adds support for gRPC health checks.
2018-02-02 17:57:27 -08:00
James Phillips 1a08e8c0f1
Changes "TLS" to "GRPCUseTLS" since it only applies to GRPC checks. 2018-02-02 17:29:34 -08:00
Wim 5cc76cce09 Fix service tags not added to health check. Part two 2018-01-29 20:32:44 +01:00
Veselkov Konstantin c2395d9bd0 fix refactoring 2018-01-28 22:53:30 +04:00
Veselkov Konstantin 05666113a4 remove golint warnings 2018-01-28 22:40:13 +04:00
Kyle Havlovitz b651253cb2
Don't remove the files, just log an error 2018-01-19 14:25:51 -08:00
Kyle Havlovitz 17ec4a9394
Add graceful handling of malformed persisted service/check files.
Previously a change was made to make the file writing atomic,
but that wasn't enough to cover something like an OS crash so we
needed something here to handle the situation more gracefully.

Fixes #1221.
2018-01-19 14:07:36 -08:00
Dmytro Kostiuchenko a45f6ad740 Add gRPC health-check #3073 2018-01-04 16:42:30 -05:00
James Phillips 518ab954bc
Merge pull request #3642 from yfouquet/master
[Fix] Service tags not added to health checks
2017-12-14 13:59:39 -08:00
James Phillips 63011dd393
Copies the autopilot settings from the runtime config.
Fixes #3730
2017-12-13 10:32:05 -08:00
Yoann Fouquet f4f7db0059 [Fix] Service tags not added to health checks
Since commit 9685bdcd0ba4b4b3adb04f9c1dd67d637ca7894e, service tags are added to the health checks.
Otherwise, when adding a service, tags are not added to its check.

In updateSyncState, we compare the checks of the local agent with the checks of the catalog.
It appears that the service tags are different (missing in one case), and so the check is synchronized.
That increase the ModifyIndex periodically when nothing changes.

Fixed it by adding serviceTags to the check.

Note that the issue appeared in version 0.8.2.
Looks related to #3259.
2017-12-12 13:39:37 +01:00
James Phillips 532cafe0af
Adds enable_agent_tls_for_checks configuration option which allows (#3661)
HTTP health checks for services requiring 2-way TLS to be checked
using the agent's credentials.
2017-11-07 18:22:09 -08:00
James Phillips 8709f65afd
Adds HTTP/2 support to Consul's HTTPS server. (#3657)
* Refactors the HTTP listen path to create servers in the same spot.

* Adds HTTP/2 support to Consul's HTTPS server.

* Vendors Go HTTP/2 library and associated deps.
2017-11-07 15:06:59 -08:00
Kyle Havlovitz bc3ba5f873
Merge branch 'master' into esm-changes 2017-11-01 11:37:48 -07:00
Frank Schroeder 7d05e55734
docker: stop previous check on replace 2017-10-26 12:03:07 +02:00
Kyle Havlovitz 16908be034
Add deregister critical service field and refactor duration parsing 2017-10-25 19:17:41 -07:00
Frank Schroeder 1dab004335
Decouple the code that executes checks from the agent 2017-10-25 11:18:07 +02:00
Frank Schroeder 29435004f6
ae: fix typo in constructor name 2017-10-23 10:56:05 +02:00
Frank Schroeder da604495a0
local state: address review comments
* move non-blocking notification mechanism into ae.Trigger
* move Pause/Resume into separate type
2017-10-23 10:56:04 +02:00
Frank Schroeder ea92ee308a
local state: tests compile 2017-10-23 10:56:03 +02:00
Frank Schroeder 7289576988
local state: replace multi-map state with structs
The state of the service and health check records was spread out over
multiple maps guarded by a single lock. Access to the maps has to happen
in a coordinated effort and the tests often violated this which made
them brittle and racy.

This patch replaces the multiple maps with a single one for both checks
and services to make the code less fragile.

This is also necessary since moving the local state into its own package
creates circular dependencies for the tests. To avoid this the tests can
no longer access internal data structures which they should not be doing
in the first place.

The tests still don't compile but this is a ncessary step in that
direction.
2017-10-23 10:56:03 +02:00
Frank Schroeder bc7571cccf
local state: move to separate package
This patch moves the local state to a separate package to further
decouple it from the agent code.

The code compiles but the tests do not yet.
2017-10-23 10:56:03 +02:00
Frank Schroeder b363586813
agent: simplify some loops 2017-10-23 10:56:03 +02:00
Frank Schroeder 8cc4ee886d
agent: cleanup StateSyncer
This patch cleans up the state syncer code by renaming fields, adding
helpers and documentation.
2017-10-23 10:56:03 +02:00
Frank Schroeder e7051da8d1
agent: decouple anti-entropy from local state
The anti-entropy code manages background synchronizations of the local
state on a regular basis or on demand when either the state has changed
or a new consul server has been added.

This patch moves the anti-entropy code into its own package and
decouples it from the local state code since they are performing
two different functions.

To simplify code-review this revision does not make any optimizations,
renames or refactorings. This will happen in subsequent commits.
2017-10-23 10:56:03 +02:00
Frank Schroeder 759350b61f
Revert "agent: decouple anti-entropy from local state"
This reverts commit a842dc9c2bf00855ef93211232da36b2d91eab5b.
2017-10-23 10:08:35 +02:00
Frank Schroeder 0d0233acd7
Revert "agent: cleanup StateSyncer"
This reverts commit b7136e100bef727144c202ae55f81152ac6a8b5f.
2017-10-23 10:08:35 +02:00