Summary:
This PR significantly reduces the compaction pressure threshold introduced in https://github.com/facebook/rocksdb/issues/12130 by a factor of 64x. The original number was too high to trigger in scenarios where compaction parallelism was needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12236
Reviewed By: cbi42
Differential Revision: D52765685
Pulled By: ajkr
fbshipit-source-id: 8298e966933b485de24f63165a00e672cb9db6c4
Summary:
### Summary: The sst_dump tool occur IO Error when reading data in PlainTable, as shown in the follow
```bash
❯ ./sst_dump --file=/tmp/write_example --command=scan --show_properties --verify_checksum
options.env is 0x60000282dc00
Process /tmp/write_example/001630.sst
Sst file format: plain table
/tmp/filepicker_example/001630.sst: IO error: While pread offset 0 len 758: /tmp/filepicker_example/001630.sst: Bad address
Process /tmp/filepicker_example/001624.sst
```
#### Reason
The root cause is that `fopts.use_mmap_reads` is false, `NewRandomAccessFile` will produce an `PosixRandomAccessFile` file. but `soptions_.use_mmap_reads` is true, This will result in unexpected calls in the `MmapDataIfNeeded` function.
```c++
Status SstFileDumper::GetTableReader(const std::string& file_path) {
...
if (s.ok()) {
if (magic_number == kPlainTableMagicNumber ||
magic_number == kLegacyPlainTableMagicNumber ||
magic_number == kCuckooTableMagicNumber) {
soptions_.use_mmap_reads = true;
...
// WARN: fopts.use_mmap_reads is false
fs->NewRandomAccessFile(file_path, fopts, &file, nullptr);
file_.reset(new RandomAccessFileReader(std::move(file), file_path));
}
...
}
if (s.ok()) {
// soptions_.use_mmap_reads is true
s = NewTableReader(ioptions_, soptions_, internal_comparator_, file_size,
&table_reader_);
}
return s;
}
```
The following read logic was executed on a `PosixRandomAccessFile` file, Eventually, `PosixRandomAccessFile::Read` will be called with a `nullptr` `scratch`
```c++
Status PlainTableReader::MmapDataIfNeeded() {
if (file_info_.is_mmap_mode) {
// Get mmapped memory.
// Executing the following logic on the PosixRandomAccessFile file is incorrect
return file_info_.file->Read(
IOOptions(), 0, static_cast<size_t>(file_size_), &file_info_.file_data,
nullptr, nullptr, Env::IO_TOTAL /* rate_limiter_priority */);
}
return Status::OK();
}
```
#### Fix:
When parsing PlainTable, set the variable `fopts.use_mmap_reads` equal `soptions_.use_mmap_reads`, When the `soptions_.use_mmap_reads` is true, `NewRandomAccessFile` will produce an `PosixMmapReadableFile` file. This will work correctly in the `MmapDataIfNeeded` function
```
❯ ./sst_dump --file=/tmp/write_example --command=scan --show_properties --verify_checksum
options.env is 0x6000009323e0
Process /tmp/write_example/001630.sst
Sst file format: plain table
from [] to []
'keys496' seq:0, type:1 => values1496
'keys497' seq:0, type:1 => values1497
'keys498' seq:0, type:1 => values1498
Table Properties:
------------------------------
# data blocks: 1
# entries: 3
# deletions: 0
# merge operands: 0
# range deletions: 0
raw key size: 45
raw average key size: 15.000000
raw value size: 42
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12223
Reviewed By: cbi42
Differential Revision: D52706238
Pulled By: ajkr
fbshipit-source-id: 2f9f518ec81d1cbde00bd65ab6bd304796836c0a
Summary:
In the current flow, the verification will pass and continue the test when db return non Ok(NotFound) status while expected state has pending writes.
fdfd044bb2/db_stress_tool/no_batched_ops_stress.cc (L2054-L2065)
We can just abort when such a db status is ever encountered. This can prevent follow up tests like `TestCheckpoint` and `TestBackupRestore` to consider such a key as existing in the db via the `ExpectedState::Exists` API. This could be a reason for some recent test failures in this path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12232
Reviewed By: cbi42
Differential Revision: D52737393
Pulled By: jowlyzhang
fbshipit-source-id: f2658c5332ccd42f6190783960e2dc6fcd81ccc5
Summary:
We test LockWAL() and UnlockWAL() by checking that latest sequence number is not changed: 1a1f9f1660/db_stress_tool/db_stress_test_base.cc (L920-L937). With writeprepared transaction, sequence number can be advanced in SwitchMemtable::WriteRecoverableState() when writing recoverable state: 1a1f9f1660/db/db_impl/db_impl_write.cc (L1560)
This PR disables LockWAL() tests for writeprepared transaction for now. We probably need to change how we test LockWAL() for writeprepared before re-enabling this test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12221
Reviewed By: ajkr
Differential Revision: D52677076
Pulled By: cbi42
fbshipit-source-id: 27ee694878edf63e8f4ad52f769d4db401f511bc
Summary:
Similar to https://github.com/facebook/rocksdb/issues/11249 , we started to get failures from `TestGetEntity` when the User-defined-timestamp was enabled. Applying the same fix as the `TestGet`
_Scenario copied from #11249_
<table>
<tr>
<th>TestGet thread</th>
<th> A writing thread</th>
</tr>
<tr>
<td>read_opts.timestamp = GetNow()</td>
<td></td>
</tr>
<tr>
<td></td>
<td>Lock key, do write</td>
</tr>
<tr>
<td>Lock key, read(read_opts) return NotFound</td>
<td></td>
</tr>
</table>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12222
Reviewed By: jowlyzhang
Differential Revision: D52678830
Pulled By: jaykorean
fbshipit-source-id: 6e154f67bb32968add8fea0b7ae7c4858ea64ee7
Summary:
- **Context**:
In ClipColumnFamily, the DeleteRange API will be used to delete data, and then CompactRange will be called for physical deletion. But now However, the ColumnFamilyHandle is not passed , so by default only the DefaultColumnFamily will be CompactRanged. Therefore, it may cause that the data in some sst files of CompactionRange cannot be physically deleted.
- **In this change**
Pass the ColumnFamilyHandle when call CompactRange
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12219
Reviewed By: ajkr
Differential Revision: D52665162
Pulled By: cbi42
fbshipit-source-id: e8e997aa25ec4ca40e347be89edc7e84a7a0edce
Summary:
Currently, when `block_cache_trace_analyzer` analyzes the cache miss ratio, it only analyzes the total miss ratio.
But it seems also important to analyze the cache miss ratio of each caller. To achieve this, we can calculate and print the miss ratio of each caller in the analyzer.
## Before modification
```
Running for 1 seconds: Processed 85732 records/second. Trace duration 58 seconds. Observed miss ratio 7.97
```
## After modification
```
Running for 1 seconds: Processed 85732 records/second. Trace duration 58 seconds. Observed miss ratio 7.97
Caller Get: Observed miss ratio 6.31
Caller Iterator: Observed miss ratio 11.86
***************************************************************
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10823
Reviewed By: ajkr
Differential Revision: D52632764
Pulled By: hx235
fbshipit-source-id: 40994d6039b73dc38fe78ea1b4adce187bb98909
Summary:
This feature combination is not fully working yet. Disable them so the stress tests have less noise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12218
Reviewed By: cbi42
Differential Revision: D52643957
Pulled By: jowlyzhang
fbshipit-source-id: 8815a18a3b5814cad4f7ec41f3fb94869302081e
Summary:
This should print more helpful message when a non-ok status like Corruption is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12217
Test Plan: CI passes.
Reviewed By: jaykorean
Differential Revision: D52637595
Pulled By: cbi42
fbshipit-source-id: e810eeb4cba633d4d4c5d198da4468995e4ed427
Summary:
Fix heap use after free error in FilePrefetchBuffer
Fix heap use after free error in FilePrefetchBuffer
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12211
Test Plan:
Ran db_stress in ASAN mode
```
==652957==ERROR: AddressSanitizer: heap-use-after-free on address 0x6150006d8578 at pc 0x7f91f74ae85b bp 0x7f91c25f90c0 sp 0x7f91c25f90b8
READ of size 8 at 0x6150006d8578 thread T48
#0 0x7f91f74ae85a in void __gnu_cxx::new_allocator<rocksdb::BufferInfo*>::construct<rocksdb::BufferInfo*, rocksdb::BufferInfo*&>(rocksdb::BufferInfo**, rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/ext/new_allocator.h:163
https://github.com/facebook/rocksdb/issues/1 0x7f91f74ae85a in void std::allocator_traits<std::allocator<rocksdb::BufferInfo*> >::construct<rocksdb::BufferInfo*, rocksdb::BufferInfo*&>(std::allocator<rocksdb::BufferInfo*>&, rocksdb::BufferInfo**, rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/bits/alloc_traits.h:512
https://github.com/facebook/rocksdb/issues/2 0x7f91f74ae85a in rocksdb::BufferInfo*& std::deque<rocksdb::BufferInfo*, std::allocator<rocksdb::BufferInfo*> >::emplace_back<rocksdb::BufferInfo*&>(rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/bits/deque.tcc:170
https://github.com/facebook/rocksdb/issues/3 0x7f91f74b93d8 in rocksdb::FilePrefetchBuffer::FreeAllBuffers() file/file_prefetch_buffer.h:557
```
Reviewed By: ajkr
Differential Revision: D52575217
Pulled By: akankshamahajan15
fbshipit-source-id: 6811ec10a393f5a62fedaff0fab5fd6e823c2687
Summary:
We often need to read the table properties of an SST file when taking a backup. However, we currently do not check checksums for this step, and even with that enabled, we ignore failures. This change ensures we fail creating a backup if corruption is detected in that step of reading table properties.
To get this working properly (with existing unit tests), we also add some temperature handling logic like already exists in
BackupEngineImpl::ReadFileAndComputeChecksum and elsewhere in BackupEngine. Also, SstFileDumper needed a fix to its error handling logic.
This was originally intended to help diagnose some mysterious failures (apparent corruptions) seen in taking backups in the crash test, though that is now fixed in https://github.com/facebook/rocksdb/pull/12206
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12200
Test Plan: unit test added that corrupts table properties, along with existing tests
Reviewed By: ajkr
Differential Revision: D52520674
Pulled By: pdillinger
fbshipit-source-id: 032cfc0791428f3b8147d34c7d424ab128e28f42
Summary:
Summary - Refactor FilePrefetchBuffer code
- Implementation:
FilePrefetchBuffer maintains a deque of free buffers (free_bufs_) of size num_buffers_ and buffers (bufs_) which contains the prefetched data. Whenever a buffer is consumed or is outdated (w.r.t. to requested offset), that buffer is cleared and returned to free_bufs_.
If a buffer is available in free_bufs_, it's moved to bufs_ and is sent for prefetching. num_buffers_ defines how many buffers are maintained that contains prefetched data.
If num_buffers_ == 1, it's a sequential read flow. Read API will be called on that one buffer whenever the data is requested and is not in the buffer.
If num_buffers_ > 1, then the data is prefetched asynchronosuly in the buffers whenever the data is consumed from the buffers and that buffer is freed.
If num_buffers > 1, then requested data can be overlapping between 2 buffers. To return the continuous buffer overlap_bufs_ is used. The requested data is copied from 2 buffers to the overlap_bufs_ and overlap_bufs_ is returned to
the caller.
- Merged Sync and Async code flow into one in FilePrefetchBuffer.
Test Plan -
- Crash test passed
- Unit tests
- Pending - Benchmarks
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12097
Reviewed By: ajkr
Differential Revision: D51759552
Pulled By: akankshamahajan15
fbshipit-source-id: 69a352945affac2ed22be96048d55863e0168ad5
Summary:
FilePrefetchBuffer makes an unchecked assumption about the behavior of RandomAccessFileReader::Read: that it will write to the provided buffer rather than returning the data in an alternate buffer. FilePrefetchBuffer has been quietly incompatible with mmap reads (e.g. allow_mmap_reads / use_mmap_reads) because in that case an alternate buffer is returned (mmapped memory). This incompatibility currently leads to quiet data corruption, as seen in amplified crash test failure in https://github.com/facebook/rocksdb/issues/12200.
In this change,
* Check whether RandomAccessFileReader::Read has the expected behavior, and fail if not. (Assertion failure in debug build, return Corruption in release build.) This will detect future regressions synchronously and precisely, rather than relying on debugging downstream data corruption.
* Why not recover? My understanding is that FilePrefetchBuffer is not intended for use when RandomAccessFileReader::Read uses an alternate buffer, so quietly recovering could lead to undesirable (inefficient) behavior.
* Mention incompatibility with mmap-based readers in the internal API comments for FilePrefetchBuffer
* Fix two cases where FilePrefetchBuffer could be used with mmap, both stemming from SstFileDumper, though one fix is in BlockBasedTableReader. There is currently no way to ask a RandomAccessFileReader whether it's using mmap, so we currently have to rely on other options as clues.
Keeping separate from https://github.com/facebook/rocksdb/issues/12200 in part because this change is more appropriate for backport than that one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12206
Test Plan:
* Manually verified that the new check aids in debugging.
* Unit test added, that fails if either fix is missed.
* Ran blackbox_crash_test for hours, with and without https://github.com/facebook/rocksdb/issues/12200
Reviewed By: akankshamahajan15
Differential Revision: D52551701
Pulled By: pdillinger
fbshipit-source-id: dea87c5782b7c484a6c6e424585c8832dfc580dc
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
Summary:
Do a size verification on the MANIFEST file during DB shutdown, after closing the file. If the verification fails, write a new MANIFEST file. In the future, we can do a more thorough verification if we want to.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12174
Test Plan: Unit test, and some manual verification
Reviewed By: ajkr
Differential Revision: D52451184
Pulled By: anand1976
fbshipit-source-id: fc3bc170e22f6c9a9c482ee5ff592abab889df83
Summary:
Currently, the data are always compacted to the same level if exceed periodic_compaction_seconds which may confuse users, so we change it to allow trigger compaction to the next level here. It's a behavior change to users, and may affect users
who have disabled their ttl or ttl > periodic_compaction_seconds.
Relate issue: https://github.com/facebook/rocksdb/issues/12165
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12175
Reviewed By: ajkr
Differential Revision: D52446722
Pulled By: cbi42
fbshipit-source-id: ccd3d2c6434ed77055735a03408d4a62d119342f
Summary:
When ranking file by compaction priority in a level, prioritize files marked for compaction over files that are not marked. This only applies to default CompactPri kMinOverlappingRatio for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12187
Test Plan: * New unit tests
Reviewed By: ajkr
Differential Revision: D52437194
Pulled By: cbi42
fbshipit-source-id: 65ea9ce5bb421e598d539a55c8219b70844b82b3
Summary:
Currently, some numbers in the `tracer_analyzer_tool` may be a little confusing and unfriendly for people who want to add new query types.
It may be better to replace them with the existing enumeration type to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10827
Reviewed By: ajkr
Differential Revision: D40576023
Pulled By: hx235
fbshipit-source-id: 0eb16820a15f365d53e848a3a8efd92928420429
Summary:
Now that `level_compaction_dynamic_level_bytes`'s default value is true, users who do not touch that setting and use non-leveled compaction will also see this log message. It can be info level rather than warning since, in the case mentioned, there is nothing the user needs to be warned about.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12186
Reviewed By: cbi42
Differential Revision: D52422499
Pulled By: ajkr
fbshipit-source-id: 8dbfcd102aab671b881ba047fb4a0a555b3e0a78
Summary:
The hardcoded nullptr argument for SystemClock to PERF_CPU_TIMER_GUARD ignored any SystemClock instance provided by the env; this was probably an oversight.
In practice, the defaulting SystemClock could lead to excessive `clock_gettime(CLOCK_THREAD_CPUTIME_ID)` syscalls if `report_bg_io_stats=true` which cannot be mitigated by the embedder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12180
Reviewed By: hx235
Differential Revision: D52421750
Pulled By: ajkr
fbshipit-source-id: 92f8a93cebe9f8030ea5f6c3bf35398078e6bdfe
Summary:
**Description**
This PR passes along the native `LiveFileMetaData#file_checksum` field from the C++ class to the Java API as a copied byte array. If there is no file checksum generator factory set beforehand, then the array will empty. Please advise if you'd rather it be null - an empty array means one extra allocation, but it avoids possible null pointer exceptions.
> **Note**
> This functionality complements but does not supersede https://github.com/facebook/rocksdb/issues/11736
It's outside the scope here to add support for Java based `FileChecksumGenFactory` implementations. As a workaround, users can already use the built-in one by creating their initial `DBOptions` via properties:
```java
final Properties props = new Properties();
props.put("file_checksum_gen_factory", "FileChecksumGenCrc32cFactory");
try (final DBOptions dbOptions = DBOptions.getDBOptionsFromProps(props);
final ColumnFamilyOptions cfOptions = new ColumnFamilyOptions();
final Options options = new Options(dbOptions, cfOptions).setCreateIfMissing(true)) {
// do stuff
}
```
I wanted to add a better test, but unfortunately there's no available CRC32C implementation available in Java 8 without adding a dependency or adding a JNI helper for RocksDB's own implementation (or bumping the minimum version for tests to Java 9). That said, I understand the test is rather poor, so happy to change it to whatever you'd like.
**Context**
To give some context, we replicate RocksDB checkpoints to other nodes. Part of this is verifying the integrity of each file during replication. With a large enough RocksDB, computing the checksum ourselves is prohibitively expensive. Since SST files comprise the bulk of the data, we'd much rather delegate this to RocksDB on file write, and read it back after to compare.
It's likely we will provide a follow up to read the file checksum list directly from the manifest without having to open the DB, but this was the easiest first step to get it working for us.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11770
Reviewed By: hx235
Differential Revision: D52420729
Pulled By: ajkr
fbshipit-source-id: a873de35a48aaf315e125733091cd221a97b9073
Summary:
Through code inspection in debugging an apparent leak of ColumnFamilyData in the crash test, I found a case where too few UnrefAndTryDelete() could be called on a cfd. This fixes that case, which would fail like this in the new unit test:
```
db_flush_test: db/column_family.cc:1648:
rocksdb::ColumnFamilySet::~ColumnFamilySet(): Assertion `last_ref' failed.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12176
Test Plan: unit test added
Reviewed By: cbi42
Differential Revision: D52417071
Pulled By: pdillinger
fbshipit-source-id: 4ee33c918409cf9c1968f138e273d3347a6cc8e5
Summary:
* Largely based on https://github.com/facebook/rocksdb/issues/12085 but grouped into one large workflow because of bad GHA UI design (see comments).
* Windows job details consolidated into an action file so that those jobs can easily move between per-pr-push and nightly.
* Simplify some handling of "CIRCLECI" environment and add "GITHUB_ACTIONS" in the same places
* For jobs that we want to go in pr-jobs or nightly there are disabled "candidate" workflows with draft versions of those jobs.
* ARM jobs are disabled waiting on full GHA support.
* build-linux-java-static needed some special attention to work, due to GLIBC compatibility issues (see comments).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12163
Test Plan:
Nightly jobs can be seen passing between these two links:
https://github.com/facebook/rocksdb/actions/runs/7266835435/job/19799390061?pr=12163https://github.com/facebook/rocksdb/actions/runs/7269697823/job/19807724471?pr=12163
And per-PR jobs of course passing on this PR.
Reviewed By: hx235
Differential Revision: D52335810
Pulled By: pdillinger
fbshipit-source-id: bbb95196f33eabad8cddf3c6b52f4413c80e034d
Summary:
I landed https://github.com/facebook/rocksdb/issues/12159 which had the below compiler error when using `-DROCKSDB_NAMESPACE`, which broke the CircleCI "build-linux-static_lib-alt_namespace-status_checked" job:
```
tools/ldb_cmd_test.cc:1213:21: error: 'rocksdb' does not name a type
1213 | int Compare(const rocksdb::Slice& a, const rocksdb::Slice& b) const override {
| ^~~~~~~
tools/ldb_cmd_test.cc:1213:35: error: expected unqualified-id before '&' token
1213 | int Compare(const rocksdb::Slice& a, const rocksdb::Slice& b) const override {
| ^
tools/ldb_cmd_test.cc:1213:35: error: expected ')' before '&' token
1213 | int Compare(const rocksdb::Slice& a, const rocksdb::Slice& b) const override {
| ~ ^
| )
tools/ldb_cmd_test.cc:1213:35: error: expected ';' at end of member declaration
1213 | int Compare(const rocksdb::Slice& a, const rocksdb::Slice& b) const override {
| ^
| ;
tools/ldb_cmd_test.cc:1213:37: error: 'a' does not name a type
1213 | int Compare(const rocksdb::Slice& a, const rocksdb::Slice& b) const override {
| ^
...
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12173
Test Plan:
```
$ make clean && make OPT="-DROCKSDB_NAMESPACE=alternative_rocksdb_ns" ldb_cmd_test -j56
```
Reviewed By: pdillinger
Differential Revision: D52373797
Pulled By: ajkr
fbshipit-source-id: 8597aaae65a5333831fef66d85072827c5fb1187
Summary:
According to this [Q&A](https://github.com/facebook/rocksdb/wiki/RocksDB-FAQ#:~:text=Q%3A%20If%20I%20use%20non%2Ddefault%20comparators%20or%20merge%20operators%2C%20can%20I%20still%20use%20ldb%20tool%3F), user should be able to use LDB with passing a customized comparator into the option.
In the process of opening DB in order to perform ldb commands, there is a exception saying comparator not match even if a option with customized comparator is provided. After initializing the column family to open DB, the `LDBCommand::OverrideBaseCFOptions` method does not update the comparator inside column family descriptor using the passed in options. This can cause a mismatch while doing version edit, and in function `ToggleUDT CompareComparator` it will failed and return a exception saying comparator not match.
Propose fix by updating the column family descriptor's option using the user passed in option. Also a test case is provided to illustrate the steps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12159
Reviewed By: hx235
Differential Revision: D52267367
Pulled By: ajkr
fbshipit-source-id: c240f93f440e02cb485893de058a46c6dbf9654b
Summary:
**Context/Summary:**
Continued from https://github.com/facebook/rocksdb/pull/12127, we can randomly reduce the # max key to coerce more operations on the same key. My experimental run shows it surfaced more issue than just https://github.com/facebook/rocksdb/pull/12127.
I also randomly reduce the related parameters, write buffer size and target file base, to adapt to randomly lower number of # max key. This creates 4 situations of testing, 3 of which are new:
1. **high** # max key with **high** write buffer size and target file base (existing)
2. **high** # max key with **low** write buffer size and target file base (new, will go through some rehearsal testing to ensure we don't run out of space with many files)
3. **low** # max key with **high** write buffer size and target file base (new, keys will stay in memory longer)
4. **low** # max key with **low** write buffer size and target file base (new, experimental runs show it surfaced even more issues)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12148
Test Plan:
- [Ongoing] Rehearsal stress test
- Monitor production stress test
Reviewed By: jaykorean
Differential Revision: D52174980
Pulled By: hx235
fbshipit-source-id: bd5e11280826819ca9314c69bbbf05d481c6d105
Summary:
HyperClockCache is intended to mitigate performance problems under stress conditions (as well as optimizing average-case parallel performance). In LRUCache, the biggest such problem is lock contention when one or a small number of cache entries becomes particularly hot. Regardless of cache sharding, accesses to any particular cache entry are linearized against a single mutex, which is held while each access updates the LRU list. All HCC variants are fully lock/wait-free for accessing blocks already in the cache, which fully mitigates this contention problem.
However, HCC (and CLOCK in general) can exhibit extremely degraded performance under a different stress condition: when no (or almost no) entries in a cache shard are evictable (they are pinned). Unlike LRU which can find any evictable entries immediately (at the cost of more coordination / synchronization on each access), CLOCK has to search for evictable entries. Under the right conditions (almost exclusively MB-scale caches not GB-scale), the CPU cost of each cache miss could fall off a cliff and bog down the whole system.
To effectively mitigate this problem (IMHO), I'm introducing a new default behavior and tuning parameter for HCC, `eviction_effort_cap`. See the comments on the new config parameter in the public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12141
Test Plan:
unit test included
## Performance test
We can use cache_bench to validate no regression (CPU and memory) in normal operation, and to measure change in behavior when cache is almost entirely pinned. (TODO: I'm not sure why I had to get the pinned ratio parameter well over 1.0 to see truly bad performance, but the behavior is there.) Build with `make DEBUG_LEVEL=0 USE_CLANG=1 PORTABLE=0 cache_bench`. We also set MALLOC_CONF="narenas:1" for all these runs to essentially remove jemalloc variances from the results, so that the max RSS given by /usr/bin/time is essentially ideal (assuming the allocator minimizes fragmentation and other memory overheads well). Base command reproducing bad behavior:
```
./cache_bench -cache_type=auto_hyper_clock_cache -threads=12 -histograms=0 -pinned_ratio=1.7
```
```
Before, LRU (alternate baseline not exhibiting bad behavior):
Rough parallel ops/sec = 2290997
1088060 maxresident
Before, AutoHCC (bad behavior):
Rough parallel ops/sec = 141011 <- Yes, more than 10x slower
1083932 maxresident
```
Now let us sample a range of values in the solution space:
```
After, AutoHCC, eviction_effort_cap = 1:
Rough parallel ops/sec = 3212586
2402216 maxresident
After, AutoHCC, eviction_effort_cap = 10:
Rough parallel ops/sec = 2371639
1248884 maxresident
After, AutoHCC, eviction_effort_cap = 30:
Rough parallel ops/sec = 1981092
1131596 maxresident
After, AutoHCC, eviction_effort_cap = 100:
Rough parallel ops/sec = 1446188
1090976 maxresident
After, AutoHCC, eviction_effort_cap = 1000:
Rough parallel ops/sec = 549568
1084064 maxresident
```
I looks like `cap=30` is a sweet spot balancing acceptable CPU and memory overheads, so is chosen as the default.
```
Change to -pinned_ratio=0.85
Before, LRU:
Rough parallel ops/sec = 2108373
1078232 maxresident
Before, AutoHCC, averaged over ~20 runs:
Rough parallel ops/sec = 2164910
1077312 maxresident
After, AutoHCC, eviction_effort_cap = 30, averaged over ~20 runs:
Rough parallel ops/sec = 2145542
1077216 maxresident
```
The slight CPU improvement above is consistent with the cap, with no measurable memory overhead under moderate stress.
```
Change to -pinned_ratio=0.25 (low stress)
Before, AutoHCC, averaged over ~20 runs:
Rough parallel ops/sec = 2221149
1076540 maxresident
After, AutoHCC, eviction_effort_cap = 30, averaged over ~20 runs:
Rough parallel ops/sec = 2224521
1076664 maxresident
```
No measurable difference under normal circumstances.
Some tests repeated with FixedHCC, with similar results.
Reviewed By: anand1976
Differential Revision: D52174755
Pulled By: pdillinger
fbshipit-source-id: d278108031b1220c1fa4c89c5a9d34b7cf4ef1b8
Summary:
`Delayed` is set true in two cases. One is when `delay` is specified. Other one is in the `while` loop - cd21e4e69d/db/db_impl/db_impl_write.cc (L1876)
However start_time is not initialized in second case, resulting in time_delayed = immutable_db_options_.clock->NowMicros() - 0(start_time);
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12147
Test Plan: Existing CircleCI
Reviewed By: cbi42
Differential Revision: D52173481
Pulled By: akankshamahajan15
fbshipit-source-id: fb9183b24c191d287a1d715346467bee66190f98
