Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
Appears possible after 5de98f2 introduced possible lost
updates. Could be related to 2af132c also. Simply ensure no sqrt of
negative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10586
Test Plan: test added
Reviewed By: ajkr
Differential Revision: D39068391
Pulled By: pdillinger
fbshipit-source-id: 230b214a41e6c9ae91a1ef3e8b2a17b46bbb17c2
Summary:
Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585
Reviewed By: akankshamahajan15
Differential Revision: D39067000
Pulled By: anand1976
fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
EnvLogger was built to replace PosixLogger that supports multiple Envs. Make FileSystem use EnvLogger by default, remove Posix FS specific implementation and remove PosixLogger code,
Some hacky changes are made to make sure iostats are not polluted by logging, in order to pass existing unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10436
Test Plan: Run db_bench and watch info log files.
Reviewed By: anand1976
Differential Revision: D38259855
fbshipit-source-id: 67d65874bfba7a33535b6d0dd0ed92cbbc9888b8
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
Add a couple of stats to help users estimate the impact of potential MultiGet perf improvements -
1. NUM_LEVEL_READ_PER_MULTIGET - A histogram stat for number of levels that required MultiGet to read from a file
2. MULTIGET_COROUTINE_COUNT - A ticker stat to count the number of times the coroutine version of MultiGetFromSST was used
The NUM_DATA_BLOCKS_READ_PER_LEVEL stat is obsoleted as it doesn't provide useful information for MultiGet optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10182
Reviewed By: akankshamahajan15
Differential Revision: D37213296
Pulled By: anand1976
fbshipit-source-id: 5d2b7708017c0e278578ae4bffac3926f6530efb
Summary:
There was an overflow bug when computing the variance in the HistogramStat class.
This manifests, for instance, when running cache_bench with default arguments. This executes 32M lookups/inserts/deletes in a block cache, and then computes (among other things) the variance of the latencies. The variance is computed as ``variance = (cur_sum_squares * cur_num - cur_sum * cur_sum) / (cur_num * cur_num)``, where ``cum_sum_squares`` is the sum of the squares of the samples, ``cur_num`` is the number of samples, and ``cur_sum`` is the sum of the samples. Because the median latency in a typical run is around 3800 nanoseconds, both the ``cur_sum_squares * cur_num`` and ``cur_sum * cur_sum`` terms overflow as uint64_t.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10100
Test Plan: Added a unit test. Run ``make -j24 histogram_test && ./histogram_test``.
Reviewed By: pdillinger
Differential Revision: D36942738
Pulled By: guidotag
fbshipit-source-id: 0af5fb9e2a297a284e8e74c24e604d302906006e
Summary:
In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't
flush the data from WAL to L0 for all column families if possible. As a
result, not all column families can increase their log_numbers, and
min_log_number_to_keep won't change.
For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change.
If we persist a new MANIFEST with
advanced log_numbers for some column families, then during a second
crash after persisting the MANIFEST, RocksDB will see some column
families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail.
As a solution, RocksDB will persist the new MANIFEST after successfully syncing the new WAL.
If a future recovery starts from the new MANIFEST, then it means the new WAL is successfully synced. Due to the sentinel empty write batch at the beginning, kPointInTimeRecovery of WAL is guaranteed to go after this point.
If future recovery starts from the old MANIFEST, it means the writing the new MANIFEST failed. We won't have the "SST ahead of WAL" error.
Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9922
Test Plan:
1. Update unit tests to fail without this change
2. make crast_test -j
Branch with unit test and no fix https://github.com/facebook/rocksdb/pull/9942 to keep track of unit test (without fix)
Reviewed By: riversand963
Differential Revision: D36043701
Pulled By: akankshamahajan15
fbshipit-source-id: 5760970db0a0920fb73d3c054a4155733500acd9
Summary:
The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index).
This flow can be parallelized.
Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap.
- Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted.
- If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass.
- If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994
Test Plan:
- **Run Regressions.**
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
i) Previous release 7.0 run for normal prefetching with async_io disabled:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Set seed to 1652922591315307 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:09:51 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found)
```
iii) db_bench with async_io enabled completed succesfully
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
Set seed to 1652924062021732 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:34:22 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found)
```
- db_stress with async_io disabled completed succesfully
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it.
Reviewed By: anand1976
Differential Revision: D36459323
Pulled By: akankshamahajan15
fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c
Summary:
This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code.
A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest.
TODO:
1. Figure out how to build it in CircleCI (requires some dependencies to be installed)
2. Do some stress testing with coroutines enabled
No regression in synchronous MultiGet between this branch and main -
```
./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics
```
Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)```
Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)```
More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file.
1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) -
No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)```
Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)```
2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file -
No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)```
Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)```
3. Single thread CPU bound workload with ~2 key overlap/file -
No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)```
Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)```
4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file -
No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ```
Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968
Reviewed By: akankshamahajan15
Differential Revision: D36348563
Pulled By: anand1976
fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696
Summary:
ROCKSDB_SUPPORT_THREAD_LOCAL definition has been removed.
`__thread`(#define) has been replaced with `thread_local`(C++ keyword) across the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10015
Reviewed By: siying
Differential Revision: D36485491
Pulled By: pdillinger
fbshipit-source-id: 6522d212514ee190b90b4e2750c80c7e34013c78
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
Left HISTORY.md and unit tests.
Added a new unit test to repro the corruption scenario that this PR fixes, and HISTORY.md line for that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9906
Reviewed By: riversand963
Differential Revision: D35940093
Pulled By: ajkr
fbshipit-source-id: 9816f99e1ce405ba36f316beb4f6378c37c8c86b
Summary:
Add stats PREFETCHED_BYTES_DISCARDED and POLL_WAIT_MICROS.
PREFETCHED_BYTES_DISCARDED records number of prefetched bytes discarded by
FilePrefetchBuffer. POLL_WAIT_MICROS records the time taken by underling
file_system Poll API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9845
Test Plan: Update existing tests
Reviewed By: anand1976
Differential Revision: D35909694
Pulled By: akankshamahajan15
fbshipit-source-id: e009ef940bb9ed72c9446f5529095caabb8a1e36
Summary:
1) In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't
flush the data from WAL to L0 for all column families if possible. As a
result, not all column families can increase their log_numbers, and
min_log_number_to_keep won't change.
2) For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change.
If we persist a new MANIFEST with
advanced log_numbers for some column families, then during a second
crash after persisting the MANIFEST, RocksDB will see some column
families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail.
As a solution,
1. the corrupted WALs whose numbers are larger than the
corrupted wal and smaller than the new WAL will be moved to archive folder.
2. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9634
Test Plan:
1. Added new unit tests
2. make crast_test -j
Reviewed By: riversand963
Differential Revision: D34463666
Pulled By: akankshamahajan15
fbshipit-source-id: e233d3af0ed4e2028ca0cf051e5a334a0fdc9d19
Summary:
Update stats in random_access_file_reader for Read and
ReadAsync API to take into account the read latency for async
prefetching.
It also fixes ERROR_HANDLER_AUTORESUME_RETRY_COUNT stat whose value was
incorrect in portal.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9810
Test Plan: Update unit test
Reviewed By: anand1976
Differential Revision: D35433081
Pulled By: akankshamahajan15
fbshipit-source-id: aeec3901270e58a003ce6b5214bd25ddcb3a12a9
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9779.
The padding at the end of a struct is added implicitly according to the
sizeof spec: "When applied to a class, the result is the
number of bytes in an object of that class including any padding
required for placing objects of that type in an array"
(https://eel.is/c++draft/expr.sizeof#2.sentence-2). We should drop the
explicit padding since it assumed support for zero-length arrays, which
is non-standard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9809
Test Plan: rely on CI
Reviewed By: riversand963
Differential Revision: D35413496
Pulled By: ajkr
fbshipit-source-id: 25d52ca45e648ad0d5657149f26f6adecbed1cb4
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9718
The verify_checksums flag of read_options should be passed to the read options used by the BlockFetcher in a couple of cases where it is not at present. It will now happen (but did not, previously) on iteration and on [multi]get, where a fetcher is created as part of the iterate/get call.
This may result in much better performance in a few workloads where the client chooses to remove verification.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9767
Reviewed By: mrambacher
Differential Revision: D35218986
Pulled By: jay-zhuang
fbshipit-source-id: 329d29764bb70fbc7f2673440bc46c107a813bc8
Summary:
We found a case of cacheline bouncing due to writers locking/unlocking `mutex_` and readers accessing `block_cache_tracer_`. We discovered it only after the issue was fixed by https://github.com/facebook/rocksdb/issues/9462 shifting the `DBImpl` members such that `mutex_` and `block_cache_tracer_` were naturally placed in separate cachelines in our regression testing setup. This PR forces the cacheline alignment of `mutex_` so we don't accidentally reintroduce the problem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9637
Reviewed By: riversand963
Differential Revision: D34502233
Pulled By: ajkr
fbshipit-source-id: 46aa313b7fe83e80c3de254e332b6fb242434c07
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
Add the 3 read bytes counter to the Statistic, which will be used by storage tiering and get the information for files with different temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9123
Test Plan: added new testing cases.
Reviewed By: siying
Differential Revision: D32154745
Pulled By: zhichao-cao
fbshipit-source-id: b7905d6dae469a72428742364ec07b634b6f15da
Summary:
This PR fix wrong ticker `WRITE_WITH_WAL`.
`RecordTick(WRITE_WITH_WAL)` will be called later in `WriteToWAL` and `ConcurrentWriteToWAL`.
Fixes:
1. Delete these two extra `RecordTick(WRITE_WITH_WAL)`
2. Fix corresponding test case
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9064
Reviewed By: ajkr
Differential Revision: D31944459
Pulled By: riversand963
fbshipit-source-id: f1aa8d2a4320456bc357bc5b0902032f7dcad086
Summary:
This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in.
There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with?
1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package
2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image
Not sure if there is more required for travis. Happy to help in any way I can.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962
Reviewed By: mrambacher
Differential Revision: D31802198
Pulled By: pdillinger
fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2
Summary:
`valueIndexMap_` in histogram is redundant and search in `valueIndexMap_` is slower than search in `bucketValues_`.
this PR delete `valueIndexMap_` and search in `bucketValues_` by `std::lower_bound`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8625
Reviewed By: zhichao-cao
Differential Revision: D31613386
Pulled By: ajkr
fbshipit-source-id: d7415d724f5c8f41f80cbe82afd7467cfad6f009
Summary:
For tiered storage project, we need to know the block read count and read bytes of files with different temperature. Add FileIOByTemperature to IOStatsContext and collect the bytes read and read count from different temperature files through the RandomAccessFileReader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8710
Test Plan: make check, add the testing cases
Reviewed By: siying
Differential Revision: D30582400
Pulled By: zhichao-cao
fbshipit-source-id: d83173de594374fc8404af5ce93a6a9be72c7141
Summary:
IOSTATS_ADD_IF_POSITIVE() doesn't seem to a macro that aims to improve performance but does the opposite. The counter to add is almost always positive so the if is just a waste. Furthermore, adding to a thread local variable seemse to be much cheaper than an if condition if branch prediction has a possibility to be wrong. Remove the macro.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8984
Test Plan: See CI completes.
Reviewed By: anand1976
Differential Revision: D31348163
fbshipit-source-id: 30af6d45e1aa8bbc09b2c046206cce6f67f4777a
Summary:
Made SystemClock into a Customizable class, complete with CreateFromString.
Cleaned up some of the existing SystemClock implementations that were redundant (NoSleep was the same as the internal one for MockEnv).
Changed MockEnv construction to allow Clock to be passed to the Memory/MockFileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8636
Reviewed By: zhichao-cao
Differential Revision: D30483360
Pulled By: mrambacher
fbshipit-source-id: cd0e3a876c39f8c98fe13374c06e8edbd5b9f2a1
Summary:
This keeps the implementations/API backward compatible. Implementations of Statistics will need to override this method (and be registered with the ObjectRegistry) in order to be created via CreateFromString.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8918
Reviewed By: pdillinger
Differential Revision: D30958916
Pulled By: mrambacher
fbshipit-source-id: 75b99a84e9e11fda2a9e8eff9ee1ef69a17517b2
Summary:
Make the Statistics object into a Customizable object. Statistics can now be stored and created to/from the Options file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8637
Reviewed By: zhichao-cao
Differential Revision: D30530550
Pulled By: mrambacher
fbshipit-source-id: 5fc7d01d8431f37b2c205bbbd8342c9f697023bd
Summary:
Gets `Statistics` from the options associated with the `DB` undergoing backup, and populates new ticker stats with the thread-local `IOContext` read/write counters for the threads doing backup work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8819
Reviewed By: pdillinger
Differential Revision: D30779238
Pulled By: ajkr
fbshipit-source-id: 75ccafc355f90906df5cf80367f7245b985772d8
Summary:
- Clarified some comments on compatibility for adding new ticker stats
- Added read I/O stats for `VerifyChecksum()` and `VerifyFileChecksums()` APIs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8741
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D30708578
Pulled By: ajkr
fbshipit-source-id: d06b961f7e199ae92c266b683e39870aa8f63449
Summary:
Add a stat for secondary cache hits. The ```Cache::Lookup``` API had an unused ```stats``` parameter. This PR uses that to pass the pointer to a ```Statistics``` object that ```LRUCache``` uses to record the stat.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8666
Test Plan: Update a unit test in lru_cache_test
Reviewed By: zhichao-cao
Differential Revision: D30353816
Pulled By: anand1976
fbshipit-source-id: 2046f78b460428877a26ffdd2bb914ae47dfbe77
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
Fixed a stats_history_test failure on Windows
* In StatsHistoryTest.InMemoryStatsHistoryPurging test, the capping memory cost of stats_history_size on Windows increases to 15000 bytes with latest changes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8520
Reviewed By: ajkr
Differential Revision: D29734631
Pulled By: mrambacher
fbshipit-source-id: 461698fcf22ef06acfb7f7aa86f8415aaffe7f1e
Summary:
I previously didn't notice the DB mutex was being held during
block cache entry stat scans, probably because I primarily checked for
read performance regressions, because they require the block cache and
are traditionally latency-sensitive.
This change does some refactoring to avoid holding DB mutex and to
avoid triggering and waiting for a scan in GetProperty("rocksdb.cfstats").
Some tests have to be updated because now the stats collector is
populated in the Cache aggressively on DB startup rather than lazily.
(I hope to clean up some of this added complexity in the future.)
This change also ensures proper treatment of need_out_of_mutex for
non-int DB properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8538
Test Plan:
Added unit test logic that uses sync points to fail if the DB mutex
is held during a scan, covering the various ways that a scan might be
triggered.
Performance test - the known impact to holding the DB mutex is on
TransactionDB, and the easiest way to see the impact is to hack the
scan code to almost always miss and take an artificially long time
scanning. Here I've injected an unconditional 5s sleep at the call to
ApplyToAllEntries.
Before (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 433.219 micros/op 2308 ops/sec; 0.1 MB/s ( transactions:78999 aborts:0)
rocksdb.db.write.micros P50 : 16.135883 P95 : 36.622503 P99 : 66.036115 P100 : 5000614.000000 COUNT : 149677 SUM : 8364856
$ TEST_TMPDIR=/dev/shm ./db_bench.base_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 448.802 micros/op 2228 ops/sec; 0.1 MB/s ( transactions:75999 aborts:0)
rocksdb.db.write.micros P50 : 16.629221 P95 : 37.320607 P99 : 72.144341 P100 : 5000871.000000 COUNT : 143995 SUM : 13472323
Notice the 5s P100 write time.
After (hacked):
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 303.645 micros/op 3293 ops/sec; 0.1 MB/s ( transactions:98999 aborts:0)
rocksdb.db.write.micros P50 : 16.061871 P95 : 33.978834 P99 : 60.018017 P100 : 616315.000000 COUNT : 187619 SUM : 4097407
$ TEST_TMPDIR=/dev/shm ./db_bench.new_xxx -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 310.383 micros/op 3221 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.270026 P95 : 35.786844 P99 : 64.302878 P100 : 603088.000000 COUNT : 183819 SUM : 4095918
P100 write is now ~0.6s. Not good, but it's the same even if I completely bypass all the scanning code:
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 311.365 micros/op 3211 ops/sec; 0.1 MB/s ( transactions:96999 aborts:0)
rocksdb.db.write.micros P50 : 16.274362 P95 : 36.221184 P99 : 68.809783 P100 : 649808.000000 COUNT : 183819 SUM : 4156767
$ TEST_TMPDIR=/dev/shm ./db_bench.new_skip -benchmarks=randomtransaction,stats -cache_index_and_filter_blocks=1 -bloom_bits=10 -partition_index_and_filters=1 -duration=30 -stats_dump_period_sec=12 -cache_size=100000000 -statistics -transaction_db 2>&1 | egrep 'db.db.write.micros|micros/op'
randomtransaction : 308.395 micros/op 3242 ops/sec; 0.1 MB/s ( transactions:97999 aborts:0)
rocksdb.db.write.micros P50 : 16.106222 P95 : 37.202403 P99 : 67.081875 P100 : 598091.000000 COUNT : 185714 SUM : 4098832
No substantial difference.
Reviewed By: siying
Differential Revision: D29738847
Pulled By: pdillinger
fbshipit-source-id: 1c5c155f5a1b62e4fea0fd4eeb515a8b7474027b
Summary:
**Summary**:
2 new statistics counters are added to RocksDB: `MEMTABLE_PAYLOAD_BYTES_AT_FLUSH` and `MEMTABLE_GARBAGE_BYTES_AT_FLUSH`. The former tracks how many raw bytes of useful data are present on the memtable at flush time, whereas the latter is tracks how many of these raw bytes are considered garbage, meaning that they ended up not being imported on the SSTables resulting from the flush operations.
**Unit test**: run `make db_flush_test -j$(nproc); ./db_flush_test` to run the unit test.
This executable includes 3 tests, that test support and correct stat calculations for workloads with inserts, deletes, and DeleteRanges. The parameters are set such that the workloads are performed on a single memtable, and a single SSTable is created as a result of the flush operation. The flush operation is manually called in the test file. The tests verify that the values of these 2 statistics counters introduced in this PR can be exactly predicted, showing that we have a full understanding of the underlying operations.
**Performance testing**:
`./db_bench -statistics -benchmarks=fillrandom -num=10000000` repeated 10 times.
Timing done using "date" function in a bash script.
_Results_:
Original Rocksdb fork: mean 66.6 sec, std 1.18 sec.
This feature branch: mean 67.4 sec, std 1.35 sec.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8411
Reviewed By: akankshamahajan15
Differential Revision: D29150629
Pulled By: bjlemaire
fbshipit-source-id: 7b3c2e86d50c6aa34fa50fd134282eacb543a5b1
Summary:
Before this PR, `get_iostats_context()` will silently return a nullptr if no thread_local support is detected.
This can be the result of build_detect_platform's failure to compile the simple code snippet on certain platforms, as
reported in https://github.com/facebook/mysql-5.6/issues/904.
To be safe, we should fail the compilation if user does not opt out IOStatsContext and
ROCKSDB_SUPPORT_THREAD_LOCAL is not defined.
If RocksDB relies on c++11, can we just always use thread_local? It turns out there might be
performance concerns (https://github.com/facebook/rocksdb/issues/5774),
which is beyond the scope of this PR. We can revisit this later. Here, we stick to the original impl.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8117
Reviewed By: ajkr
Differential Revision: D27356847
Pulled By: riversand963
fbshipit-source-id: f7d5776842277598d8341b955febb601946801ae
Summary:
Add statistics and info log for error handler: counters for bg error, bg io error, bg retryable io error, auto resume, auto resume total retry, and auto resume sucess; Histogram for auto resume retry count in each recovery call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8050
Test Plan: make check and add test to error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D26990565
Pulled By: zhichao-cao
fbshipit-source-id: 49f71e8ea4e9db8b189943976404205b56ab883f
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
On x86_64, this makes the struct 8 bytes smaller, so creating a PerfStepTimer on the stack will use slightly less stack space.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7931
Reviewed By: jay-zhuang
Differential Revision: D26529470
Pulled By: ajkr
fbshipit-source-id: bbe2e843167152ffa05a5946f1add6621c9849f7
Summary:
This is likely a temp fix before we figure out a better way.
PerfStepTimer is used intensively in certain benchmarking/testings. https://github.com/facebook/rocksdb/issues/7858 stores a `shared_ptr` to system clock in PerfStepTimer which gets created each time a `PerfStepTimer` object is created. The atomic operations in `shared_ptr` may add overhead in CPU cycles. Therefore, we change it back to a raw `SystemClock*` for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8006
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D26703560
Pulled By: riversand963
fbshipit-source-id: 519d0769b28da2334bea7d86c848fcc26ee8a17f
Summary:
Fixed 5 test case failures found on Windows 10/Windows Server 2016
1. In `flush_job_test`, the DestroyDir function fails in deconstructor because some file handles are still being held by VersionSet. This happens on Windows Server 2016, so need to manually reset versions_ pointer to release all file handles.
2. In `StatsHistoryTest.InMemoryStatsHistoryPurging` test, the capping memory cost of stats_history_size on Windows becomes 14000 bytes with latest changes, not just 13000 bytes.
3. In `SSTDumpToolTest.RawOutput` test, the output file handle is not closed at the end.
4. In `FullBloomTest.OptimizeForMemory` test, ROCKSDB_MALLOC_USABLE_SIZE is undefined on windows so `total_mem` is always equal to `total_size`. The internal memory fragmentation assertion does not apply in this case.
5. In `BlockFetcherTest.FetchAndUncompressCompressedDataBlock` test, XPRESS cannot reach 87.5% compression ratio with original CreateTable method, so I append extra zeros to the string value to enhance compression ratio. Beside, since XPRESS allocates memory internally, thus does not support for custom allocator verification, we will skip the allocator verification for XPRESS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7992
Reviewed By: jay-zhuang
Differential Revision: D26615283
Pulled By: ajkr
fbshipit-source-id: 3632612f84b99e2b9c77c403b112b6bedf3b125d
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798
Reviewed By: jay-zhuang
Differential Revision: D25680451
Pulled By: pdillinger
fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
This PR schedules a background thread (shared across all DB instances)
to flush info log every ten seconds. This improves debuggability in case
of RocksDB hanging since it ensures the log messages leading up to the hang
will eventually become visible in the log.
The bulk of this PR is moving monitoring/stats_dump_scheduler* to db/periodic_work_scheduler*
and making the corresponding name changes since now the scheduler handles info
log flushing, not just stats dumping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7488
Reviewed By: riversand963
Differential Revision: D24065165
Pulled By: ajkr
fbshipit-source-id: 339c47a0ff43b79fdbd055fbd9fefbb6f9d8d3b5
Summary:
Currently, application may pass a statistics object to db but later
wants to reduce stats tracking overhead by setting stats level to
kExceptHistogramOrTimers (the current lowest level). Tickers will still
be incremented, causing up to 1% CPU. We can add a new lowest stats
level `kExceptTickers` to disable ticker incrementing as well, thus
reducing CPU cycles spent on tickers.
Test Plan (devserver):
```
make check
make clean
DEBUG_LEVEL=0 make db_bench
./db_bench -perf_level=1 -stats_level=0 -statistics -benchmarks=fillseq,readrandom -duration=120
```
Measure CPU util (%) before and after change:
CPU util by rocksdb::RecordTick: 1.1 vs (<0.1)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7329
Reviewed By: pdillinger
Differential Revision: D23434014
Pulled By: riversand963
fbshipit-source-id: 72ff0f02a192ac476d4b0044b9f37fd4a22ff0d4
Summary:
And change the internal time value from seconds to microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7293
Reviewed By: pdillinger
Differential Revision: D23253751
Pulled By: jay-zhuang
fbshipit-source-id: 36aa9376b8801b85bd10163173590a17cf4f3a3a
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
There's a potential deadlock caused by MockTimeEnv time value get to a large number, which causes TimedWait() wait forever. The test misuses the microseconds as seconds, making it more likely to happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7277
Reviewed By: pdillinger
Differential Revision: D23183873
Pulled By: jay-zhuang
fbshipit-source-id: 6fc38ebd40b4125a99551204b271f91a27e70086
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223
Reviewed By: riversand963
Differential Revision: D23056737
Pulled By: jay-zhuang
fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
Adds compaction statistics (total bytes read and written) for compactions that occur for delete-triggered, periodic, and TTL compaction reasons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7165
Test Plan:
TTL and periodic can be checked by runnning db_bench with the options activated:
/db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -periodic_compaction_seconds=1
./db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -fifo_compaction_ttl=1
Setting the time to one second causes non-zero bytes read/written for those compaction reasons. Disabling them or setting them to times longer than the test run length causes the stats to return to zero as expected.
Delete-triggered compaction counting is tested in DBTablePropertiesTest.DeletionTriggeredCompactionMarking
Reviewed By: ajkr
Differential Revision: D22693050
Pulled By: akabcenell
fbshipit-source-id: d15cef4d94576f703015c8942d5f0d492f69401d
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.
Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.
Example with full filter thrashing "cliff":
$ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
...
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 14181
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 476
rocksdb.block.cache.data.add COUNT : 12749
rocksdb.block.cache.data.add.redundant COUNT : 18
rocksdb.block.cache.filter.add COUNT : 1003
rocksdb.block.cache.filter.add.redundant COUNT : 217
rocksdb.block.cache.index.add COUNT : 429
rocksdb.block.cache.index.add.redundant COUNT : 241
$ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
rocksdb.block.cache.add COUNT : 1182223
rocksdb.block.cache.add.failures COUNT : 0
rocksdb.block.cache.add.redundant COUNT : 302728
rocksdb.block.cache.data.add COUNT : 31425
rocksdb.block.cache.data.add.redundant COUNT : 12
rocksdb.block.cache.filter.add COUNT : 795455
rocksdb.block.cache.filter.add.redundant COUNT : 130238
rocksdb.block.cache.index.add COUNT : 355343
rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681
Test Plan: Some manual testing (above) and unit test covering key metrics is included
Reviewed By: ltamasi
Differential Revision: D21134113
Pulled By: pdillinger
fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We see some odd errors complaining math. However, it doesn't seem that it is needed to be included. Remove the include of math.h. Just removing it from db_bench doesn't seem to break anything. Replacing sqrt from std::sqrt seems to work for histogram.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6373
Test Plan: Watch Travis and appveyor to run.
Differential Revision: D19730068
fbshipit-source-id: d3ad41defcdd9f51c2da1a3673fb258f5dfacf47
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
This was previously broken, as the performance context-related
macro signatures in file monitoring/perf_context_imp.h
deviated for the case when NPERF_CONTEXT was defined and when it
was not.
Update the macros for the `-DNPERF_CONTEXT` case, so it compiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5704
Differential Revision: D16867746
fbshipit-source-id: 05539724cb1f7955ecc42828365836a677759ad9
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
Recent commit 3886dddc3b introduced a new test which is not compatible with lite mode and breaks contrun test:
```
[ RUN ] StatsHistoryTest.ForceManualFlushStatsCF
monitoring/stats_history_test.cc:642: Failure
Expected: (cfd_stats->GetLogNumber()) < (cfd_test->GetLogNumber()), actual: 15 vs 15
```
This PR excludes the test from lite mode to appease the failing test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5529
Differential Revision: D16080892
Pulled By: miasantreble
fbshipit-source-id: 2f8a22758f71250cd9f204046404226ddc13b028
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
recent commit 671d15cbdd introduced some test failures:
```
===== Running stats_history_test
[==========] Running 9 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 9 tests from StatsHistoryTest
[ RUN ] StatsHistoryTest.RunStatsDumpPeriodSec
monitoring/stats_history_test.cc:63: Failure
dbfull()->SetDBOptions({{"stats_dump_period_sec", "0"}})
Not implemented: Not supported in ROCKSDB LITE
db/db_options_test.cc:28:11: error: unused variable 'kMicrosInSec' [-Werror,-Wunused-const-variable]
const int kMicrosInSec = 1000000;
```
This PR fixes these failures
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5477
Differential Revision: D15871814
Pulled By: miasantreble
fbshipit-source-id: 0a7023914d2c1784d9d2d3f5bfb47310d4855394
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Since Statistics::measureTime() is deprecated, StatisticsImpl::measureTime() is not implemented. We realized that users might have a wrapped Statistics implementation in which measureTime() is implemented as forwarded to StatisticsImpl, and causes assert failure. In order to make the change less intrusive, we implement StatisticsImpl::measureTime(). We will revisit whether we need to remove it after several releases.
Also, add a test to make sure that a Statistics implementation using the old interface still works.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5181
Differential Revision: D14907089
Pulled By: siying
fbshipit-source-id: 29b6202fd04e30ed6f6adcaeb1000e87f10d1e1a
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
I think when PR https://github.com/facebook/rocksdb/pull/4889 added the `IOSTATS_CPU_TIMER_GUARD` define to this header file, the noop version in the `#else` branch was forgotten.
Not sure if this is common, but on my MacOS machine it breaks my build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5136
Differential Revision: D14727727
Pulled By: siying
fbshipit-source-id: 1076e56bdbe6ecda01d461b371dabf7f1593a149
Summary:
Introduce CPU timers for iterator seek and next operations. Seek
counter includes SeekToFirst, SeekToLast and SeekForPrev, w/ the
caveat that SeekToLast timer doesn't include some post processing
time if upper bound is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5076
Differential Revision: D14525218
Pulled By: fredfsh
fbshipit-source-id: 03ba25df3b22b06c072621e4de0eacfa1445f0d9
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
Existing implementation of PerfContext does not define copy constructor or assignment operator, which could potentially cause problems when user create copies and resets the builtin one. This PR address the issue by providing these two constructors with deep copy semantics.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4919
Differential Revision: D13960406
Pulled By: miasantreble
fbshipit-source-id: 36aab5aaee65d4480f537e4e22148faa45e8e334
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889
Differential Revision: D13701276
Pulled By: zinoale
fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
