Summary:
On file systems that support storage level data checksum and reconstruction, retry SST block reads for point lookups, scans, and flush and compaction if there's a checksum mismatch on the initial read. A file system can indicate its support by setting the `FSSupportedOps::kVerifyAndReconstructRead` bit in `SupportedOps`.
Tests:
Add new unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12427
Reviewed By: ajkr
Differential Revision: D55025941
Pulled By: anand1976
fbshipit-source-id: dbd990cb75e03f756c8a66d42956f645c0b6d55e
Summary:
When compiling with `-DNROCKSDB_THREAD_STATUS`, some functions in ThreadStatusUtil are declared but their definition is missing. Their definitions are only compiled when not defining `NROCKSDB_THREAD_STATUS`. This causes problems on linking, when the linker cannot find the definitions of
- ThreadStatusUtil::GetThreadOperation
- ThreadStatusUtil::SetEnableTracking
This PR fixes it by adding stubs for these functions in case `NROCKSDB_THREAD_STATUS` is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12400
Reviewed By: ajkr
Differential Revision: D54510769
Pulled By: cbi42
fbshipit-source-id: e79e9257492d3dba59615e9e306df7e79838d73b
Summary:
Enabling time PerfCounter stats in RocksDB is currently very expensive, as it enables all sorts of relatively uninteresting stats, such as iteration, point lookup breakdown etc. This PR adds a new perf level between `kEnableCount` and `kEnableTimeExceptForMutex` to enable stats for time spent by user (i.e a RocksDB user) threads blocked by other RocksDB threads or events, such as a write group leader, write delay or stalls etc. It does not include time spent waiting to acquire mutexes, or waiting for IO.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12368
Test Plan: Add a unit test for write_thread_wait_nanos
Reviewed By: ajkr
Differential Revision: D54021583
Pulled By: anand1976
fbshipit-source-id: 3f6fcf71010132ffffca0391a5565f3b59fddd48
Summary:
The RocksDB ticker and histogram statistics were out of sync between the C++ and Java code, with a number of newer stats missing in TickerType.java and HistogramType.java. Also, there were gaps in numbering in portal.h, which could soon become an issue due to the number of tickers and the fact that we're limited to 1 byte in Java. This PR adds the missing stats, and re-numbers all of them. It also moves some stats around to try to group related stats together. Since this will go into a major release, compatibility shouldn't be an issue.
This should be automated at some point, since the current process is somewhat error prone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12355
Reviewed By: jaykorean
Differential Revision: D53825324
Pulled By: anand1976
fbshipit-source-id: 298c180872f4b9f1ee54b8bb22f4e280458e7e09
Summary:
The following are risks associated with pointer-to-pointer reinterpret_cast:
* Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do.
* Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally.
I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement:
* Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have
`struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic.
* Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance.
With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain.
A couple of related interventions included here:
* Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle.
* Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse).
Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work.
I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308
Test Plan: existing tests, CI
Reviewed By: ltamasi
Differential Revision: D53204947
Pulled By: pdillinger
fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2
Summary:
As titled, the replacement tickers have been introduced in https://github.com/facebook/rocksdb/issues/11509 and in use since release 8.4. This PR completely removes the misspelled ones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12302
Test Plan: CI tests
Reviewed By: jaykorean
Differential Revision: D53196935
Pulled By: jowlyzhang
fbshipit-source-id: 9c9d0d321247690db5edfdc52b4fecb2f1218979
Summary:
In C++, `extern` is redundant in a number of cases:
* "Global" function declarations and definitions
* "Global" variable definitions when already declared `extern`
For consistency and simplicity, I've removed these in code that *we own*. In a couple of cases, I removed obsolete declarations, and for MagicNumber constants, I have consolidated the declarations into a header file (format.h)
as standard best practice would prescribe.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12300
Test Plan: no functional changes, CI
Reviewed By: ajkr
Differential Revision: D53148629
Pulled By: pdillinger
fbshipit-source-id: fb8d927959892e03af09b0c0d542b0a3b38fd886
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: dmm-fb
Differential Revision: D52968964
fbshipit-source-id: 2cb8c683f958742e2f151db8ef6824ab622528e6
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: dmm-fb
Differential Revision: D52969001
fbshipit-source-id: d628fa6c5e5d01657fcb7aff7b05dea704ed2025
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
Summary:
Fixes https://github.com/facebook/rocksdb/issues/12061.
We were double counting the `BYTES_WRITTEN` ticker when doing writes with transactions. During transactions, after writing, a client can call `Prepare()`, which writes the values to WAL but not to the Memtable. After that, they can call `Commit()`, which writes a commit marker to the WAL and the values to Memtable.
The cause of this bug is previously during writes, we didn't take into account `writer->ShouldWriteToMemtable()` before adding to `total_byte_size`, so it is still added to during the `Prepare()` phase even though we're not writing to the Memtable, which was why we saw the value to be double of what's written to WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12111
Test Plan: Added a test in `db/db_statistics_test.cc` that tests writes with and without transactions, by comparing the values of `BYTES_WRITTEN` and `WAL_FILE_BYTES` after doing writes.
Reviewed By: jaykorean
Differential Revision: D51954327
Pulled By: jowlyzhang
fbshipit-source-id: 57a0986a14e5b94eb5188715d819212529110d2c
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: dmm-fb
Differential Revision: D51778007
fbshipit-source-id: 5d1b20a3acc4bcc7cd7c204f2f73a14fc8f81883
Summary:
Add stats for better observability of scan prefetching. Its only implemented for sync scan right now. These stats can help inform future improvements in scan prefetching.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11981
Test Plan: Add a new unit test
Reviewed By: akankshamahajan15
Differential Revision: D50516505
Pulled By: anand1976
fbshipit-source-id: cb1cc6cf02df8295930a49c62b11870020df3f97
Summary:
Context/Summary: as titled
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11957
Test Plan: piggyback on existing tests; fixed a failed test due to adding new stats
Reviewed By: ajkr, cbi42
Differential Revision: D50294310
Pulled By: hx235
fbshipit-source-id: d99b97ebac41efc1bdeaf9ca7a1debd2927d54cd
Summary:
... when compiled with ASSERT_STATUS_CHECKED = 1.
The main change is in iterator_wrapper.h. The remaining changes are just fixing existing unit tests. Adding this check to IteratorWrapper gives a good coverage as the class is used in many places, including child iterators under merging iterator, merging iterator under DB iter, file_iter under level iterator, etc. This change can catch the bug fixed in https://github.com/facebook/rocksdb/issues/11782.
Future follow up: enable `ASSERT_STATUS_CHECKED=1` for stress test and for DEBUG_LEVEL=0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11975
Test Plan:
* `ASSERT_STATUS_CHECKED=1 DEBUG_LEVEL=2 make -j32 J=32 check`
* I tried to run stress test with `ASSERT_STATUS_CHECKED=1`, but there are a lot of existing stress code that ignore status checking, and fail without the change in this PR. So defer that to a follow up task.
Reviewed By: ajkr
Differential Revision: D50383790
Pulled By: cbi42
fbshipit-source-id: 1a28ce0f5fdf1890f93400b26b3b1b3a287624ce
Summary:
In follow-up to https://github.com/facebook/rocksdb/issues/11922, fix a race in functions like CreateColumnFamily and SetDBOptions where the DB reports one option setting but a different one is left in effect.
To fix, we can add an extra mutex around these rare operations. We don't want to hold the DB mutex during I/O or other slow things because of the many purposes it serves, but a mutex more limited to these cases should be fine.
I believe this would fix a write-write race in https://github.com/facebook/rocksdb/issues/10079 but not the read-write race.
Intended follow-up to this:
* Should be able to remove write thread synchronization from DBImpl::WriteOptionsFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11929
Test Plan:
Added two mini-stress style regression tests that fail with >1% probability before this change:
DBOptionsTest::SetStatsDumpPeriodSecRace
ColumnFamilyTest::CreateAndDropPeriodicRace
I haven't reproduced such an inconsistency between in-memory options and on disk latest options, but this change at least improves safety and adds a test anyway:
DBOptionsTest::SetStatsDumpPeriodSecRace
Reviewed By: ajkr
Differential Revision: D50024506
Pulled By: pdillinger
fbshipit-source-id: 1e99a9ed4d96fdcf3ac5061ec6b3cee78aecdda4
Summary:
`GetEntity` API support for ReadOnly DB and Secondary DB.
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`)
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity`
- `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally.
- `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()`
- Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`.
- Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799
Test Plan:
**Unit Tests**
- Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup.
- Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()`
- `make -j64 check`
**Crash Tests**
- `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
- `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 `
- `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
Reviewed By: ltamasi
Differential Revision: D49037040
Pulled By: jaykorean
fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b
Summary:
Existing compaction statistics are `COMPACTION_TIME` and `COMPACTION_CPU_TIME` which are histogram and are logged at the end of a compaction. The new statistics `COMPACTION_CPU_TOTAL_TIME` is for cumulative total compaction time which is updated regularly during a compaction. This allows user to more closely track compaction cpu usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11741
Test Plan: * new unit test `DBTestWithParam.CompactionTotalTimeTest`
Reviewed By: ajkr
Differential Revision: D48608094
Pulled By: cbi42
fbshipit-source-id: b597109f3e4bf2237fb5a216b6fd036e5363b4c0
Summary:
Implement trimming of readahead_size under a new option ReadOptions.auto_readahead_size. It'll trim the readahead_size during prefetching upto iterate_upper_bound offset only when ReadOptions.iterate_upper_bound is set, therefore reducing the prefetching of data beyond upper_bound.
It's enabled for both implicit auto readahead size and when ReadOptions.readahead_size is specified and for sync and async_io.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11684
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D48479723
Pulled By: akankshamahajan15
fbshipit-source-id: 2b1703579caf779105e836b580866ffd7db076fc
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version: 604f6fd3f4
- db_basic_bench_base: upstream
- db_basic_bench_pr: db_basic_bench_base + this PR
- asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read)
- asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR
**Test**
Get
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000
```
Result
```
Coming soon
```
AsyncRead
```
TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out
```
Result
```
Base:
1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008,
PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before):
1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053,
```
Reviewed By: ajkr
Differential Revision: D45918925
Pulled By: hx235
fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
Summary:
This ticker combined with `rocksdb.files.marked.trash` can help give a better picture of how DeleteScheduler is keeping up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11540
Test Plan:
```
./delete_scheduler_test
```
Reviewed By: ajkr
Differential Revision: D46746401
Pulled By: jowlyzhang
fbshipit-source-id: f3daa622aa3ddefe7d673e0cc257a47699d506df
Summary:
Add new tickers: `rocksdb.error.handler.bg.error.count`, `rocksdb.error.handler.bg.io.error.count`, `rocksdb.error.handler.bg.retryable.io.error.count` to replace the misspelled ones: `rocksdb.error.handler.bg.errro.count`, `rocksdb.error.handler.bg.io.errro.count`, `rocksdb.error.handler.bg.retryable.io.errro.count` ('error' instead of 'errro'). Users should switch to use the new tickers before 9.0 release as the misspelled old tickers will be completely removed then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11509
Reviewed By: ltamasi
Differential Revision: D46542809
Pulled By: jowlyzhang
fbshipit-source-id: a2a6d8354af46a060de81d40ef6f5336a80bd32e
Summary:
We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers.
This change does several things:
* Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\*
* Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access.
* We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.)
* For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in.
* The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases.
* The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix.
* Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460
Test Plan:
unit tests updated, including updating many to pop the stat value since last read to improve test
readability and maintainability.
Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED).
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
```
And run simultaneous before&after with
```
TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics
```
Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec
After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec
Reviewed By: ajkr
Differential Revision: D46029177
Pulled By: pdillinger
fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
Added a ticker stat, `BLOCK_CHECKSUM_MISMATCH_COUNT`, to count how many block checksum verifications detected a mismatch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11438
Test Plan: new unit test
Reviewed By: pdillinger
Differential Revision: D45788179
Pulled By: ajkr
fbshipit-source-id: e2b44eba7c23b3e110ebe69eaa78a710dec2590f
Summary:
## Option API updates
* Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7.
* Remove unnecessary constructor for CompressionOptions.
* Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated).
## Stat API updates
* Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed.
* Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing.
* New or existing tickers relevant to compression:
* BYTES_COMPRESSED_FROM
* BYTES_COMPRESSED_TO
* BYTES_COMPRESSION_BYPASSED
* BYTES_COMPRESSION_REJECTED
* COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing)
* NUMBER_BLOCK_COMPRESSED (existing)
* NUMBER_BLOCK_COMPRESSION_BYPASSED
* NUMBER_BLOCK_COMPRESSION_REJECTED
* BYTES_DECOMPRESSED_FROM
* BYTES_DECOMPRESSED_TO
We can compute a number of things with these stats:
* "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO
* Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED)
* Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED
* Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES
Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression.
## BlockBasedTableBuilder
Various small refactorings, optimizations, and name clean-ups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388
Test Plan:
unit tests added
* `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field.
Reviewed By: ajkr
Differential Revision: D45128202
Pulled By: pdillinger
fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
Summary:
If RocksDB enables user-defined timestamp, then RocksDB read path can filter table files by the min/max timestamps of each file. If application wants to lookup a key that is the most recent and visible to a certain timestamp ts, then we can compare ts with the min_ts of each file. If ts < min_ts, then we know all keys in the file is not visible at time ts, then we do not have to open the file. This can also save an IO.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11332
Reviewed By: pdillinger
Differential Revision: D44763497
Pulled By: guowentian
fbshipit-source-id: abde346b9f18480fe03c04e4006e7d62aa9c22a8
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
Add more stats for better visibility into the usefulness of the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11246
Test Plan: Add a new unit test
Reviewed By: akankshamahajan15
Differential Revision: D43521364
Pulled By: anand1976
fbshipit-source-id: a92f04884e738a9bf40ad4047acaaaea343838a7
Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Since compressed block cache is removed, those stats are not needed. They are removed in different PR in case there is a problem with it. The stats are removed in the same way in https://github.com/facebook/rocksdb/pull/11131/ . HISTORY.md was already updated by mistake, and it would be correct after merging this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11135
Test Plan: Watch CI
Reviewed By: ltamasi
Differential Revision: D42757616
fbshipit-source-id: bd7cb782585c8535ce5784295225c376f3011f35
Summary:
These tickers/histograms have been obsolete (and not populated) for a long time.
The patch removes them from the API completely. Note that this means that the
numeric values of the remaining tickers change in the C++ code as they get shifted up.
This should be OK: the values of some existing tickers have changed many times
over the years as items have been added in the middle. (In contrast, the convention
in the Java bindings is to keep the ids, which are not guaranteed to be the same
as the ids on the C++ side, the same across releases.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11123
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42727793
Pulled By: ltamasi
fbshipit-source-id: e058a155a20b05b45f53e67ee380aece1b43b6c5
Summary:
Add a tiered storage migration test which would conflict with
an ongoing penultimate level compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10908
Test Plan: Test only change
Reviewed By: anand1976
Differential Revision: D40864509
Pulled By: ajkr
fbshipit-source-id: e316e849a01a6c71a41be130101f909b6c0498cb
Summary:
Add stats for time spent in the ReadAsync call, and async read errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10947
Test Plan: Run db_bench and look at stats
Reviewed By: akankshamahajan15
Differential Revision: D41236637
Pulled By: anand1976
fbshipit-source-id: 70539b69a28491d57acead449436a761f7108acf
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
**Context/Summary:**
Previous experience with bugs and flaky tests taught us there exist features in RocksDB vulnerable to race condition caused by acquiring db mutex at a particular timing. This PR aggressively exposes those vulnerable features by injecting spurious wakeup and sleep to cause acquiring db mutex at various timing in order to expose such race condition
**Testing:**
- `COERCE_CONTEXT_SWITCH=1 make -j56 check / make -j56 db_stress` should reveal
- flaky tests caused by db mutex related race condition
- Reverted https://github.com/facebook/rocksdb/pull/9528
- A/B testing on `COMPILE_WITH_TSAN=1 make -j56 listener_test` w/ and w/o `COERCE_CONTEXT_SWITCH=1` followed by `./listener_test --gtest_filter=EventListenerTest.MultiCF --gtest_repeat=10`
- `COERCE_CONTEXT_SWITCH=1` can cause expected test failure (i.e, expose target TSAN data race error) within 10 run while the other couldn't.
- This proves our injection can expose flaky tests caused by db mutex related race condition faster.
- known or new race-condition-type of internal bug by continuously running this PR
- Performance
- High ops-threads time: COERCE_CONTEXT_SWITCH=1 regressed by 4 times slower (2:01.16 vs 0:22.10 elapsed ). This PR will be run as a separate CI job so this regression won't affect any existing job.
```
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=100000 --expected_values_dir=$exp --clear_column_family_one_in=0 \
--write_buffer_size=524288 —target_file_size_base=524288 —ingest_external_file_one_in=100 —compact_files_one_in=1000 —compact_range_one_in=1000
```
- Start-up time: COERCE_CONTEXT_SWITCH=1 didn't regress by 25% (0:01.51 vs 0:01.29 elapsed)
```
TEST_TMPDIR=$db ./db_stress -ops_per_thread=100000000 -expected_values_dir=$exp --clear_column_family_one_in=0 & sleep 120; pkill -9 db_stress
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=1 -reopen=0 --expected_values_dir=$exp --clear_column_family_one_in=0 --destroy_db_initially=0
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10291
Reviewed By: ajkr
Differential Revision: D39231182
Pulled By: hx235
fbshipit-source-id: 7ab6695430460e0826727fd8c66679b32b3e44b6
anand76