14 KiB

Raw Blame History

layout	page_title	sidebar_current	description
api	/sys/replication - HTTP API	docs-http-system-replication-performance	The '/sys/replication/performance' endpoint focuses on managing general operations in Vault Enterprise Performance Replication

`/sys/replication/performance`

~> Enterprise Only – These endpoints require Vault Enterprise.

Check Performance Status

This endpoint prints information about the status of replication (mode, sync progress, etc).

This is an authenticated endpoint.

Method	Path	Produces
`GET`	`/sys/replication/performance/status`	`200 application/json`

Sample Request

$ curl \
    https://vault.rocks/v1/sys/replication/performance/status

Sample Response

The printed status of the replication environment. As an example, for a primary, it will look something like:

{
  "mode": "perf-primary",
  "cluster_id": "d4095d41-3aee-8791-c421-9bc7f88f7c3e",
  "known_secondaries": [],
  "last_wal": 0,
  "merkle_root": "c3260c4c682ff2d6eb3c8bfd877134b3cec022d1",
  "request_id": "009ea98c-06cd-6dc3-74f2-c4904b22e535",
  "lease_id": "",
  "renewable": false,
  "lease_duration": 0,
  "data": {
    "cluster_id": "d4095d41-3aee-8791-c421-9bc7f88f7c3e",
    "known_secondaries": [],
    "last_wal": 0,
    "merkle_root": "c3260c4c682ff2d6eb3c8bfd877134b3cec022d1",
    "mode": "primary"
  },
  "wrap_info": null,
  "warnings": null,
  "auth": null
}

Enable Performance Primary Replication

This endpoint enables replication in primary mode. This is used when replication is currently disabled on the cluster (if the cluster is already a secondary, it must be promoted).

!> Only one primary should be active at a given time. Multiple primaries may result in data loss!

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/enable`	`204 (empty body)`

Parameters

primary_cluster_addr (string: "") – Specifies the cluster address that the primary gives to secondary nodes. Useful if the primary's cluster address is not directly accessible and must be accessed via an alternate path/address, such as through a TCP-based load balancer. If not set, uses vault's configured cluster address.

Sample Payload

{}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/primary/enable

Demote Performance Primary

This endpoint demotes a performance primary cluster to a performance secondary. This secondary cluster will not attempt to connect to a primary (see the update-primary call), but will maintain knowledge of its cluster ID and can be reconnected to the same replication set without wiping local storage.

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/demote`	`204 (empty body)`

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    https://vault.rocks/v1/sys/replication/performance/primary/demote

Disable Performance Primary

This endpoint disables performance replication entirely on the cluster. Any performance secondaries will no longer be able to connect. Caution: re-enabling this node as a primary or secondary will change its cluster ID; in the secondary case this means a wipe of the underlying storage when connected to a primary, and in the primary case, secondaries connecting back to the cluster (even if they have connected before) will require a wipe of the underlying storage.

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/disable`	`204 (empty body)`

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    https://vault.rocks/v1/sys/replication/performance/primary/disable

Generate Performance Secondary Token

This endpoint generates a performance secondary activation token for the cluster with the given opaque identifier, which must be unique. This identifier can later be used to revoke a secondary's access.

This endpoint requires 'sudo' capability.

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/secondary-token`	`200 application/json`

Parameters

id (string: <required>) – Specifies an opaque identifier, e.g. 'us-east'
ttl (string: "30m") – Specifies the TTL for the secondary activation token.

Sample Payload

{
  "id": "us-east-1"
}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/primary/secondary-token

Sample Response

{
  "request_id": "",
  "lease_id": "",
  "lease_duration": 0,
  "renewable": false,
  "data": null,
  "warnings": null,
  "wrap_info": {
    "token": "fb79b9d3-d94e-9eb6-4919-c559311133d6",
    "ttl": 300,
    "creation_time": "2016-09-28T14:41:00.56961496-04:00",
    "wrapped_accessor": ""
  }
}

Revoke Performance Secondary Token

This endpoint revokes a performance secondary's ability to connect to the performance primary cluster; the secondary will immediately be disconnected and will not be allowed to connect again unless given a new activation token.

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/revoke-secondary`	`204 (empty body)`

Parameters

id (string: <required>) – Specifies an opaque identifier, e.g. 'us-east'

Sample Payload

{
  "id": "us-east"
}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/primary/revoke-secondary

Create Mounts Filter

This endpoint is used to modify the mounts that are filtered to a secondary. Filtering can be specified in whitelist mode or blacklist mode. In whitelist mode the secret and auth mounts that are specified are included to the selected secondary. In blacklist mode, the mouunt paths are excluded.

Method	Path	Produces
`POST`	`/sys/replication/performance/primary/mount-filter/:id`	`204 (empty body)`

Parameters

id (string: <required>) – Specifies an opaque identifier, e.g. 'us-east'
mode (string: "whitelist") – Specifies the filtering mode. Available values are "whitelist" and blacklist".
paths (array: []) – The list of mount paths that are filtered.

Sample Payload

{
  "mode": "whitelist",
  "paths": ["secret/"]
}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/primary/mount-filter/us-east-1

Read Mounts Filter

This endpoint is used to read the mode and the mount paths that are filtered for a secondary.

Method	Path	Produces
`GET`	`/sys/replication/performance/primary/mount-filter/:id`	`200 (empty body)`

Parameters

id (string: <required>) – Specifies an opaque identifier, e.g. 'us-east'

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    https://vault.rocks/v1/sys/replication/performance/primary/mount-filter/us-east-1

Sample Response

{
  "mode": "whitelist",
  "paths": ["secret/"]
}

Delete Mounts Filter

This endpoint is used to delete the mount filters for a secondary.

Method	Path	Produces
`DELETE`	`/sys/replication/performance/primary/mount-filter/:id`	`204 (empty body)`

Parameters

id (string: <required>) – Specifies an opaque identifier, e.g. 'us-east'

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    https://vault.rocks/v1/sys/replication/performance/primary/mount-filter/us-east-1

Enable Performance Secondary

This endpoint enables performance replication on a secondary using a secondary activation token.

!> This will immediately clear all data in the secondary cluster!

Method	Path	Produces
`POST`	`/sys/replication/performance/secondary/enable`	`204 (empty body)`

Parameters

token (string: <required>) – Specifies the secondary activation token fetched from the primary.
primary_api_addr (string: "") – Set this to the API address (normal Vault address) to override the value embedded in the token. This can be useful if the primary's redirect address is not accessible directly from this cluster (e.g. through a load balancer).
ca_file (string: "") – Specifies the path to a CA root file (PEM format) that the secondary can use when unwrapping the token from the primary. If this and ca_path are not given, defaults to system CA roots.
ca_path (string: "") – Specifies the path to a CA root directory containing PEM-format files that the secondary can use when unwrapping the token from the primary. If this and ca_file are not given, defaults to system CA roots.

Sample Payload

{
  "token": "..."
}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/secondary/enable

Promote Performance Secondary

This endpoint promotes the performance secondary cluster to performance primary. For data safety and security reasons, new secondary tokens will need to be issued to other secondaries, and there should never be more than one performance primary at a time.

Method	Path	Produces
`POST`	`/sys/replication/performance/secondary/promote`	`204 (empty body)`

Parameters

primary_cluster_addr (string: "") – Specifies the cluster address that the primary gives to secondary nodes. Useful if the primary's cluster address is not directly accessible and must be accessed via an alternate path/address (e.g. through a load balancer).

Sample Payload

{}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/secondary/promote

Disable Performance Secondary

This endpoint disables performance replication entirely on the cluster. The cluster will no longer be able to connect to the performance primary.

!> Re-enabling this node as a performance primary or secondary will change its cluster ID; in the secondary case this means a wipe of the underlying storage when connected to a primary, and in the primary case, secondaries connecting back to the cluster (even if they have connected before) will require a wipe of the underlying storage.

Method	Path	Produces
`POST`	`/sys/replication/performance/secondary/disable`	`204 (empty body)`

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    https://vault.rocks/v1/sys/replication/performance/secondary/disable

Update Performance Secondary's Primary

This endpoint changes a performance secondary cluster's assigned primary cluster using a secondary activation token. This does not wipe all data in the cluster.

Method	Path	Produces
`POST`	`/sys/replication/performance/secondary/update-primary`	`204 (empty body)`

Parameters

token (string: <required>) – Specifies the secondary activation token fetched from the primary. If you set this to a blank string, the cluster will stay a secondary but clear its knowledge of any past primary (and thus not attempt to connect to the previous primary). This can be useful if the primary is down to stop the secondary from trying to reconnect to it.
primary_api_addr (string: ) – Specifies the API address (normal Vault address) to override the value embedded in the token. This can be useful if the primary's redirect address is not accessible directly from this cluster.
ca_file (string: "") – Specifies the path to a CA root file (PEM format) that the secondary can use when unwrapping the token from the primary. If this and ca_path are not given, defaults to system CA roots.
ca_path string: () – Specifies the path to a CA root directory containing PEM-format files that the secondary can use when unwrapping the token from the primary. If this and ca_file are not given, defaults to system CA roots.

Sample Payload

{
  "token": "..."
}

Sample Request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    https://vault.rocks/v1/sys/replication/performance/secondary/update-primary

14 KiB Raw Blame History Unescape Escape

/sys/replication/performance

Check Performance Status

Sample Request

Sample Response

Enable Performance Primary Replication

Parameters

Sample Payload

Sample Request

Demote Performance Primary

Sample Request

Disable Performance Primary

Sample Request

Generate Performance Secondary Token

Parameters

Sample Payload

Sample Request

Sample Response

Revoke Performance Secondary Token

Parameters

Sample Payload

Sample Request

Create Mounts Filter

Parameters

Sample Payload

Sample Request

Read Mounts Filter

Parameters

Sample Request

Sample Response

Delete Mounts Filter

Parameters

Sample Request

Enable Performance Secondary

Parameters

Sample Payload

Sample Request

Promote Performance Secondary

Parameters

Sample Payload

Sample Request

Disable Performance Secondary

Sample Request

Update Performance Secondary's Primary

Parameters

Sample Payload

Sample Request

14 KiB

Raw Blame History

`/sys/replication/performance`