When requesting a SSH certificate with default_extension templating
enabled, if the request lacks entity information and a particular
extension requires templating, just these extensions will be elided.
Other extensions (if present) will still be on the final certificate.
Add a warning in the event of missing entity information and at least
one extension that was skipped as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow OCSP to use issuer's RevocationSigAlgo
When an issuer specifies a RevocationSigAlgo, we should largely follow
this for both CRLs and OCSP. However, x/crypto/ocsp lacks support for
PSS signatures, so we drop these down to PKCS#1v1.5 instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when issuer has PSS-based RevSigAlgo
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about OCSP and PSS support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI: Add support for signature_bits param to the intermediate/generate api
- Mainly to work properly with GCP backed managed keys, we need to
issue signatures that would match the GCP key algorithm.
- At this time due to https://github.com/golang/go/issues/45990 we
can't issue PSS signed CSRs, as the libraries in Go always request
a PKCS1v15.
- Add an extra check in intermediate/generate that validates the CSR's
signature before providing it back to the client in case we generated
a bad signature such as if an end-user used a GCP backed managed key
with a RSA PSS algorithm.
- GCP ignores the requested signature type and always signs with the
key's algorithm which can lead to a CSR that says it is signed with
a PKCS1v15 algorithm but is actually a RSA PSS signature
* Add cl
* PR feedback
* PKI: Do not load revoked certificates if CRL has been disabled
- Restore the prior behavior of not reading in all revoked certificates
if the CRL has been disabled as there might be performance issues
if a customer had or is still revoking a lot of certificates.
* Add cl
When adding delta CRL support, we unconditionally added the delta
indicator extension to the main CRL. We shouldn't have done this, and
instead only added it conditionally when we were building delta CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
The periodic function only runs every 50ms, so waiting 60ms means we
might not be done fetching the CRL on slower CI systems or with high
test parallelism.
Tested with:
> untilfail -parallel=-9 ../../../cert.test -test.run=TestCRLFetch -test.count=1 -test.v
And shown to reliably fail before, fixed after.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Check if plugin version matches running version
When registering a plugin, we check if the request version matches the
self-reported version from the plugin. If these do not match, we log a
warning.
This uncovered a few missing pieces for getting the database version
code fully working.
We added an environment variable that helps us unit test the running
version behavior as well, but only for approle, postgresql, and consul
plugins.
Return 400 on plugin not found or version mismatch
Populate the running SHA256 of plugins in the mount and auth tables (#17217)
* Fix interoperability concerns with PSS
When Go parses a certificate with rsaPSS OID, it will accept this
certificate but not parse the SubjectPublicKeyInfo, leaving the
PublicKeyAlgorithm and PublicKey fields blank, but otherwise not erring.
The same behavior occurs with rsaPSS OID CSRs.
On the other hand, when Go parses rsaPSS OID PKCS8 private keys, these
keys will fail to parse completely.
Thus, detect and fail on any empty PublicKey certs and CSRs, warning the
user that we cannot parse these correctly and thus refuse to operate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Run more PKI tests in parallel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add notes about PSS shortcomings to considerations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Basics of Cert-Count Telemetry, changelog, "best attempt" slice to capture (and test for) duplicates, Move sorting of possibleDoubleCountedRevokedSerials to after compare of entries. Add values to counter when still initializing.
Set lists to nil after use, Fix atomic2 import, Delay reporting metrics until after deduplication has completed,
The test works now, Move string slice to helper function; Add backendUUID to gauge name.
* Don't race for CRL rebuilding capability check
Core has recently seen some data races during SystemView/replication
updates between them and the PKI subsystem. This is because this
SystemView access occurs outside of a request (during invalidation
handling) and thus the proper lock isn't held.
Because replication status cannot change within the lifetime of a plugin
(and instead, if a node switches replication status, the entire plugin
instance will be torn down and recreated), it is safe to cache this
once, at plugin startup, and use it throughout its lifetime.
Thus, we replace this SystemView access with a stored boolean variable
computed ahead of time.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pki/backend.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
There were two races here:
1. Tests racing against periodic func on updating the backend.
2. Tests racing internally to itself, to access the http-served
CRL data.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fetch CRLs from a user defined CDP (PoC)
* Handle no param sent
* Move CRL fetch to a periodFunc. Use configured CA certs + system root as trusted certs for CRL fetch
* comments
* changelog
* Just use root trust
* cdp->url in api
* Store CRL and populate it initially in cdlWrite
* Update docs
* Update builtin/credential/cert/path_crls.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Handle pre-verification of a CRL url better
* just in case
* Fix crl write locking
* Add a CRL fetch unit test
* Remove unnecessary validity clear
* Better func name
* Don't exit early updating CRLs
* lock in updateCRLs
* gofumpt
* err-
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Add plugin version to GRPC interface
Added a version interface in the sdk/logical so that it can be shared between all plugin types, and then wired it up to RunningVersion in the mounts, auth list, and database systems.
I've tested that this works with auth, database, and secrets plugin types, with the following logic to populate RunningVersion:
If a plugin has a PluginVersion() method implemented, then that is used
If not, and the plugin is built into the Vault binary, then the go.mod version is used
Otherwise, the it will be the empty string.
My apologies for the length of this PR.
* Placeholder backend should be external
We use a placeholder backend (previously a framework.Backend) before a
GRPC plugin is lazy-loaded. This makes us later think the plugin is a
builtin plugin.
So we added a `placeholderBackend` type that overrides the
`IsExternal()` method so that later we know that the plugin is external,
and don't give it a default builtin version.
This option was elided from the default value for the usage field. This
results in issuers "losing" ocsp-signing when they're POST updated. Most
issuers will want OCSP signing by default, so it makes sense to add this
as the default.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support version selection for database plugins
* Don't consider unversioned plugins for version selection algorithm
* Added version to 'plugin not found' error
* Add PluginFactoryVersion function to avoid changing sdk/ API
* Allow exposing access to the underlying container
This exposes the Container response from the Docker API, allowing
consumers of the testhelper to interact with the newly started running
container instance. This will be useful for two reasons:
1. Allowing radiusd container to start its own daemon after modifying
its configuration.
2. For loading certificates into a future similar integration test
using the PKI secrets engine.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow any client to connect to test radiusd daemon
This fixes test failures of the following form:
> 2022-09-07T10:46:19.332-0400 [TRACE] core: adding local paths: paths=[]
> 2022-09-07T10:46:19.333-0400 [INFO] core: enabled credential backend: path=mnt/ type=test
> 2022-09-07T10:46:19.334-0400 [WARN] Executing test step: step_number=1
> 2022-09-07T10:46:19.334-0400 [WARN] Executing test step: step_number=2
> 2022-09-07T10:46:29.334-0400 [WARN] Executing test step: step_number=3
> 2022-09-07T10:46:29.335-0400 [WARN] Executing test step: step_number=4
> 2022-09-07T10:46:39.336-0400 [WARN] Requesting RollbackOperation
> --- FAIL: TestBackend_acceptance (28.56s)
> testing.go:364: Failed step 4: erroneous response:
>
> &logical.Response{Secret:<nil>, Auth:<nil>, Data:map[string]interface {}{"error":"context deadline exceeded"}, Redirect:"", Warnings:[]string(nil), WrapInfo:(*wrapping.ResponseWrapInfo)(nil), Headers:map[string][]string(nil)}
> FAIL
> FAIL github.com/hashicorp/vault/builtin/credential/radius 29.238s
In particular, radiusd container ships with a default clients.conf which
restricts connections to ranges associated with the Docker daemon. When
creating new networks (such as in CircleCI) or when running via Podman
(which has its own set of network ranges), this initial config will no
longer be applicable. We thus need to write a new config into the image;
while we could do this by rebuilding a new image on top of the existing
layers (provisioning our config), we then need to manage these changes
and give hooks for the service setup to build it.
Thus, post-startup modification is probably easier to execute in our
case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- When we added new tests that validate the RSA PSS feature, they
work properly on normal Go builds, but tests underneath the Boring
Crypto fips implementations fail due to a lack of SHA3 support in
FIPS 140-2.
* Get import correct
* limits, docs
* changelog
* unit tests
* And fix import for hmac unit test
* typo
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Update builtin/logical/transit/path_keys.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Validate key sizes a bit more carefully
* Update sdk/helper/keysutil/policy.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Add fields 'ttl' and 'num_uses' to SecretID generation.
Add fields 'ttl' and 'num_uses' when generating/obtaining a SecretID.
Rather than just being able to use the Role's SecretID ttl and num uses. #14390
* Add secret_id_num_uses response field to generating SecretID
Add the response field secret_id_num_uses to the endpoints for generating
SecretIDs. Used in testing but also to supply the vendor with this variable.
* Add tests for new ttl and num_uses SecretID generation fields
Add tests to assert the new TTL and NumUses option in the SecretID entry.
Separate test for testing with just parameters vs a -force example.
* Patch up test for ttl and num_uses fields
* Add changelog entry for auth/approle 'ttl' and 'num_uses' fields
* Add fields to API Docs and AppRole Auth Docs example
* Correct error message for failing test on missing field.
Change the error message produced when a test fails due to a missing field.
Previous values did not map to correct fields.
* Remove unnecessary int cast to int "secret_id_num_uses" field.
Unnecessary cast to int where type already is int.
* Move numUses field check to after assignment.
* Remove metadata entry in sample payload to limit change to changes made.
Remove metadata entry in sample payload for custom-secret-id. The metadata was not
changed in the features pull request.
* Bind fields 'ttl' and 'num_uses' to role's configuration.
Rather than implicitly overriding, error when the ttl is lower than and the num
uses higher than the role's configuration. #14390
* Update changelog 14474 with a more detailed description.
More elaborate description for the changelog. Specifying the per-request based fields.
* Elaborate more on the bounds of the 'ttl' and 'num_uses' field.
Specify in both the api-docs and the CLI the limits of the fields.
Specify that the role's configuration is still the leading factor.
* Upper bound ttl with role secret id ttl
Upper bound ttl with role secret id ttl when creating a secret id
Adding test cases for infinite ttl and num uses
Adding test cases for negative ttl and num uses
Validation on infinite ttl and num uses
* Formatting issues. Removed unnecessary newline
* Update documentation for AppRole Secret ID and Role
Changed that TTL is not allowed to be shorter to longer
* Cleanup approle secret ID test and impl
* Define ttl and num_uses in every test
Define ttl and num_uses in every test despite them not being tested.
This is to ensure that no unexpected behaviour comes to mind.
* Rename test RoleSecretID -> RoleSecretIDWithoutFields
* Test secret id generation defaults to Role's config
Test secret id generation defaults to Role's configuration entries.
* Change finit -> finite
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* Rephrase comments to the correct validation check
* Rephrase role-secret-id option description
* Remove "default" incorrect statement about ttl
* Remove "default" incorrect statement about ttl for custom secret id
* Touch up approle.mdx to align more with path_role documentation
Co-authored-by: Remco Buddelmeijer <r.buddelmeijer@fullstaq.com>
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* Add path to manually rebuild delta CRLs
The crl/rotate-delta path behaves like crl/rotate, triggering a
cluster-local rebuild of just the delta CRL. This is useful for when
delta CRLs are enabled with a longer-than-desired auto-rebuild period
after some high-profile revocations occur.
In the event delta CRLs are not enabled, this becomes a no-op.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for Delta CRL rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update documentation about Delta CRLs
Also fixes a omission in the If-Modified-Since docs to mention that the
response header should probably also be passed through.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy operations to be cancelled
When tidy operations take a long time to execute (and especially when
executing them automatically), having the ability to cancel them becomes
useful to reduce strain on Vault clusters (and let them be rescheduled
at a later time).
To this end, we add the /tidy-cancel write endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing auto-tidy synopsis / description
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a pause duration between tidying certificates
By setting pause_duration, operators can have a little control over the
resource utilization of a tidy operation. While the list of certificates
remain in memory throughout the entire operation, a pause is added
between processing certificates and the revocation lock is released.
This allows other operations to occur during this gap and potentially
allows the tidy operation to consume less resources per unit of time
(due to the sleep -- though obviously consumes the same resources over
the time of the operation).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for cancellation, pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API docs on pause_duration, /tidy-cancel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add lock releasing around tidy pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Reset cancel guard, return errors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* accommodate salt lengths for RSA PSS
* address feedback
* generalise salt length to an int
* fix error reporting
* Revert "fix error reporting"
This reverts commit 8adfc15fe3303b8fdf9f094ea246945ab1364077.
* fix a faulty check
* check for min/max salt lengths
* stringly-typed HTTP param
* unit tests for sign/verify HTTP requests
also, add marshaling for both SDK and HTTP requests
* randomly sample valid salt length
* add changelog
* add documentation
* Add remove_roots_from_chain flag to sign and issue pki apis
- Add a new flag to allow end-users to control if we return the
root/self-signed CA certificate within the list of certificates in
ca_chain field on issue and sign api calls.
* Add cl
* PR feedback
We switch these fields to use the explicit default value (computing the
time in seconds appropriately).
As reported by @beornf, thanks!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to perform automatic tidy operations
This enables the PKI secrets engine to allow tidy to be started
periodically by the engine itself, avoiding the need for interaction.
This operation is disabled by default (to avoid load on clusters which
don't need tidy to be run) but can be enabled.
In particular, a default tidy configuration is written (via
/config/auto-tidy) which mirrors the options passed to /tidy. Two
additional parameters, enabled and interval, are accepted, allowing
auto-tidy to be enabled or disabled and controlling the interval
(between successful tidy runs) to attempt auto-tidy.
Notably, a manual execution of tidy will delay additional auto-tidy
operations. Status is reported via the existing /tidy-status endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent race during parallel testing
We modified the RollbackManager's execution window to allow more
faithful testing of the periodicFunc. However, the TestAutoRebuild and
the new TestAutoTidy would then race against each other for modifying
the period and creating their clusters (before resetting to the old
value).
This changeset adds a lock around this, preventing the races.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use tidyStatusLock to gate lastTidy time
This prevents a data race between the periodic func and the execution of
the running tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add read lock around tidyStatus gauges
When reading from tidyStatus for computing gauges, since the underlying
values aren't atomics, we really should be gating these with a read lock
around the status access.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Issuer renames should invalidate CRL cache times
When an issuer is renamed (or rather, two issuers' names are swapped in
quick succession), this is akin to the earlier identified default issuer
update condition. So, when any issuer is updated, go ahead and trigger
the invalidation logic.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix handling of delta CRL If-Modified-Since
The If-Modified-Since PR was proposed prior to the Delta CRL changes and
thus didn't take it into account. This follow-up commit fixes that,
addressing If-Modified-Since semantics for delta CRL fetching and
ensuring an accurate number is stored.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* enable registering backend muxed plugins in plugin catalog
* set the sysview on the pluginconfig to allow enabling secrets/auth plugins
* store backend instances in map
* store single implementations in the instances map
cleanup instance map and ensure we don't deadlock
* fix system backend unit tests
move GetMultiplexIDFromContext to pluginutil package
fix pluginutil test
fix dbplugin ut
* return error(s) if we can't get the plugin client
update comments
* refactor/move GetMultiplexIDFromContext test
* add changelog
* remove unnecessary field on pluginClient
* add unit tests to PluginCatalog for secrets/auth plugins
* fix comment
* return pluginClient from TestRunTestPlugin
* add multiplexed backend test
* honor metadatamode value in newbackend pluginconfig
* check that connection exists on cleanup
* add automtls to secrets/auth plugins
* don't remove apiclientmeta parsing
* use formatting directive for fmt.Errorf
* fix ut: remove tls provider func
* remove tlsproviderfunc from backend plugin tests
* use env var to prevent test plugin from running as a unit test
* WIP: remove lazy loading
* move non lazy loaded backend to new package
* use version wrapper for backend plugin factory
* remove backendVersionWrapper type
* implement getBackendPluginType for plugin catalog
* handle backend plugin v4 registration
* add plugin automtls env guard
* modify plugin factory to determine the backend to use
* remove old pluginsets from v5 and log pid in plugin catalog
* add reload mechanism via context
* readd v3 and v4 to pluginset
* call cleanup from reload if non-muxed
* move v5 backend code to new package
* use context reload for for ErrPluginShutdown case
* add wrapper on v5 backend
* fix run config UTs
* fix unit tests
- use v4/v5 mapping for plugin versions
- fix test build err
- add reload method on fakePluginClient
- add multiplexed cases for integration tests
* remove comment and update AutoMTLS field in test
* remove comment
* remove errwrap and unused context
* only support metadatamode false for v5 backend plugins
* update plugin catalog errors
* use const for env variables
* rename locks and remove unused
* remove unneeded nil check
* improvements based on staticcheck recommendations
* use const for single implementation string
* use const for context key
* use info default log level
* move pid to pluginClient struct
* remove v3 and v4 from multiplexed plugin set
* return from reload when non-multiplexed
* update automtls env string
* combine getBackend and getBrokeredClient
* update comments for plugin reload, Backend return val and log
* revert Backend return type
* allow non-muxed plugins to serve v5
* move v5 code to existing sdk plugin package
* do next export sdk fields now that we have removed extra plugin pkg
* set TLSProvider in ServeMultiplex for backwards compat
* use bool to flag multiplexing support on grpc backend server
* revert userpass main.go
* refactor plugin sdk
- update comments
- make use of multiplexing boolean and single implementation ID const
* update comment and use multierr
* attempt v4 if dispense fails on getPluginTypeForUnknown
* update comments on sdk plugin backend
* honor header if-modified-since if present
* pathGetIssuerCRL first version
* check if modified since for CA endpoints
* fix date comparison for CA endpoints
* suggested changes and refactoring
* add writeIssuer to updateDefaultIssuerId and fix error
* Move methods out of storage.go into util.go
For the most part, these take a SC as param, but aren't directly storage
relevant operations. Move them out of storage.go as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use UTC timezone for storage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rework path_fetch for better if-modified-since handling
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Invalidate all issuers, CRLs on default write
When the default is updated, access under earlier timestamps will not
work as we're unclear if the timestamp is for this issuer or a previous
issuer. Thus, we need to invalidate the CRL and both issuers involved
(previous, next) by updating their LastModifiedTimes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for If-Modified-Since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invalidate default issuer changes
When the default issuer changes, we'll have to mark the invalidation on
PR secondary clusters, so they know to update their CRL mapping as well.
The swapped issuers will have an updated modification time (which will
eventually replicate down and thus be correct), but the CRL modification
time is cluster-local information and thus won't be replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sendNotModifiedResponseIfNecessary
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on if-modified-since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow generation of up-to-date delta CRLs
While switching to periodic rebuilds of CRLs alleviates the constant
rebuild pressure on Vault during times of high revocation, the CRL
proper becomes stale. One response to this is to switch to OCSP, but not
every system has support for this. Additionally, OCSP usually requires
connectivity and isn't used to augment a pre-distributed CRL (and is
instead used independently).
By generating delta CRLs containing only new revocations, an existing
CRL can be supplemented with newer revocations without requiring Vault
to rebuild all complete CRLs. Admins can periodically fetch the delta
CRL and add it to the existing CRL and applications should be able to
support using serials from both.
Because delta CRLs are emptied when the next complete CRL is rebuilt, it
is important that applications fetch the delta CRL and correlate it to
their complete CRL; if their complete CRL is older than the delta CRL's
extension number, applications MUST fetch the newer complete CRL to
ensure they have a correct combination.
This modifies the revocation process and adds several new configuration
options, controlling whether Delta CRLs are enabled and when we'll
rebuild it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback: fix several bugs
Thanks Steve!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invoke periodic func on active nodes
We need to ensure we read the updated config (in case of OCSP request
handling on standby nodes), but otherwise want to avoid CRL/DeltaCRL
re-building.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy steps into two separate helpers
This refactors the tidy go routine into two separate helpers, making it
clear where the boundaries of each are: variables are passed into these
method and concerns are separated. As more operations are rolled into
tidy, we can continue adding more helpers as appropriate. Additionally,
as we move to make auto-tidy occur, we can use these as points to hook
into periodic tidying.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor revInfo checking to helper
This allows us to validate whether or not a revInfo entry contains a
presently valid issuer, from the existing mapping. Coupled with the
changeset to identify the issuer on revocation, we can begin adding
capabilities to tidy to update this association, decreasing CRL build
time and increasing the performance of OCSP.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor issuer fetching for revocation purposes
Revocation needs to gracefully handle using the old legacy cert bundle,
so fetching issuers (and parsing them) needs to be done slightly
differently than other places. Refactor this from revokeCert into a
common helper that can be used by tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to associate revoked certs, issuers
When revoking a certificate, we need to associate the issuer that signed
its certificate back to the revInfo entry. Historically this was
performed during CRL building (and still remains so), but when running
without CRL building and with only OCSP, performance will degrade as the
issuer needs to be found each time.
Instead, allow the tidy operation to take over this role, allowing us to
increase the performance of OCSP and CRL in this scenario, by decoupling
issuer identification from CRL building in the ideal case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for tidy updates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on new tidy parameter, metrics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy config into shared struct
Finish adding metrics, status messages about new tidy operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ocsp_expiry configuration field to PKI crl config
- Add a new configurable duration field to the crl configuration to
allow operator control of how long an OCSP response can be cached
for.
- This is useful for how long a server like NGINX/Apache is
allowed to cache the response for OCSP stapling.
- A value of 0 means no one should cache the response.
- Address an issue discovered that we did not upgrade existing crl
configurations properly
* PR feedback
* Refactor CRL tests to use /sys/mounts
Thanks Steve for the approach! This also address nits from Kit.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Skip CRL building steps when disabled
This skips a number of steps during CRL build when it is disabled (and
forceNew is not set). In particular, we avoid fetching issuers, we avoid
associating issuers with revocation entries (and building that in-memory
mapping), making CRL building more efficient.
This means that there'll again be very little overhead on clusters with
the CRL disabled.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent revoking roots from appearing on own CRLs
This change ensures that when marking a root as revoked, it no longer
appears on its own CRL. Very few clients support this event (as
generally only leaves/intermediates are checked for presence on a
parent's CRL) and it is technically undefined behavior (if the root is
revoked, its own CRL should be untrusted and thus including it on its
own CRL isn't a safe/correct distribution channel).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure stability of revInfo issuer identification
As mentioned by Kit, iterating through each revInfoEntry and associating
the first issuer which matches it can cause churn when many (equivalent)
issuers are in the system and issuers come and go (via CRLSigning usage,
which has been modified in this release as well). Because we'd not
include issuers without CRLSigning usage, we'd cause our verification
helper, isRevInfoIssuerValid, to think the issuer ID is no longer value
(when instead, it just lacks crlSigning bits).
We address this by pulling in all issuers we know of for the
identification. This allows us to keep valid-but-not-for-signing
issuers, and use other representatives of their identity set for
signing/building the CRL (if they are enabled for such usage).
As a side effect, we now no longer place these entries on the default
CRL in the event all issuers in the CRL set are without the usage.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
This is only for the last commit.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
v6 was released in the last 24h, and our tests fail to connect to the db when v6 is used.
Using v6 needs investigating, but for now I'm pinning to the last known good version.
* Identify issuer on revocation
When we attempt to revoke a leaf certificate, we already parse all of
the issuers within the mount (to x509.Certificate) to ensure we don't
accidentally revoke an issuer via the leaf revocation endpoint. We can
reuse this information to associate the issuer (via issuer/subject
comparison and signature checking) to the revoked cert in its revocation
info. This will help OCSP, avoiding the case where the OCSP handler
needs to associate a certificate to its issuer.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test to ensure issuers are identified
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow correct importing of certs without CRL KU
When Vault imports certificates without KU for CRLSign, we shouldn't
provision CRLUsage on the backing issuer; otherwise, we'll attempt to
build CRLs and Go will cause us to err out. This change makes it clear
(at issuer configuration time) that we can't possibly support this
operation and hopefully prevent users from running into the more cryptic
Go error.
Note that this does not apply for OCSP EKU: the EKU exists, per RFC 6960
Section 2.6 OCSP Signature Authority Delegation, to allow delegation of
OCSP signing to a child certificate. This EKU is not necessary on the
issuer itself, and generally assumes issuers are allowed to issue OCSP
responses regardless of KU/EKU.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs to clarify issue with import, CRL usage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
* Add additional test assertion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle multiple matching issuers in OCSP requests
- Select the first issuer that matches our request hashes and has
the OCSP signing usage enabled. This might not match the exact
issuer id that issued the certificate but the signatures will be
okay.
* PR feedback
Previously we used the global backend-set crlLifetime as a default
value. However, this was refactored into a new defaultCrlConfig instead,
which we should reply with when the CRL configuration has not been set
yet. In particular, the 72h default expiry (and new 12h auto-rebuild
grace period) was added and made explicit.
This fixes the broken UI test.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* auth/cert: Add metadata to identity-alias
Add the possibility to include certificate metadata in the created
logical.Alias (the identity alias), in addition to the metadata added
to logical.Auth. This is analogous to the behaviour of the ldap and
approle auth providers.
This possibility can be configured by the config endpoint of the
auth method mount and is disabled by default. We added the read
operation on this config endpoint as well.
Fixes: #14418
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* Add changelog for #14751
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* Test the usage of cert metadata in ACL policies
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
Signed-off-by: Peter Verraedt <peter@verraedt.be>
* Allow automatic rebuilding of CRLs
When enabled, periodic rebuilding of CRLs will improve PKI mounts in two
way:
1. Reduced load during periods of high (new) revocations, as the CRL
isn't rebuilt after each revocation but instead on a fixed schedule.
2. Ensuring the CRL is never stale as long as the cluster remains up,
by checking for next CRL expiry and regenerating CRLs before that
happens. This may increase cluster load when operators have large
CRLs that they'd prefer to let go stale, rather than regenerating
fresh copies.
In particular, we set a grace period before expiration of CRLs where,
when the periodic function triggers (about once a minute), we check
upcoming CRL expirations and check if we need to rebuild the CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on periodic rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow modification of rollback period for testing
When testing backends that use the periodic func, and specifically,
testing the behavior of that periodic func, waiting for the usual 1m
interval can lead to excessively long test execution. By switching to a
shorter period--strictly for testing--we can make these tests execute
faster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-rebuilding of CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove non-updating getConfig variant
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Avoid double reload of config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor existing CRL function to storage getRevocationConfig
* Introduce ocsp_disable config option in config/crl
* Introduce OCSPSigning usage flag on issuer
* Add ocsp-request passthrough within lower layers of Vault
* Add OCSP responder to Vault PKI
* Add API documentation for OCSP
* Add cl
* Revert PKI storage migration modifications for OCSP
* Smaller PR feedback items
- pki.mdx doc update
- parens around logical.go comment to indicate DER encoded request is
related to OCSP and not the snapshots
- Use AllIssuers instead of writing them all out
- Drop zero initialization of crl config's Disable flag if not present
- Upgrade issuer on the fly instead of an initial migration
* Additional clean up backing out the writeRevocationConfig refactoring
* Remove Dirty issuer flag and update comment about not writing upgrade to
storage
* Address PR feedback and return Unknown response when mismatching issuer
* make fmt
* PR Feedback.
* More PR feedback
- Leverage ocsp response constant
- Remove duplicate errors regarding unknown issuers
* Migrate existing PKI mounts that only contains a key
- We missed testing a use-case of the migration that someone has a PKI
mount point that generated a CSR but never called set-signed back on
that mount point so it only contains a key.
* Add cl
* Add per-issuer AIA URI information
Per discussion on GitHub with @maxb, this allows issuers to have their
own copy of AIA URIs. Because each issuer has its own URLs (for CA and
CRL access), its necessary to mint their issued certs pointing to the
correct issuer and not to the global default issuer. For anyone using
multiple issuers within a mount, this change allows the issuer to point
back to itself via leaf's AIA info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on per-issuer AIA info
Also add it to the considerations page as something to watch out for.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for per-issuer AIA information
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor AIA setting on the issuer
This introduces a common helper per Steve's suggestion.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages w.r.t. AIA naming
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages regarding AIA URLs
This clarifies which request parameter the invalid URL is contained
in, disambiguating the sometimes ambiguous usage of AIA, per suggestion
by Max.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename getURLs -> getGlobalAIAURLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correct AIA acronym expansion word orders
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bad comment suggesting re-generating roots
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add two entries to URL tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow marking issuers as revoked
This allows PKI's issuers to be considered revoked and appear on each
others' CRLs. We disable issuance (via removing the usage) and prohibit
modifying the usage via the regular issuer management interface.
A separate endpoint is necessary because issuers (especially if signed
by a third-party CA using incremental serial numbers) might share a
serial number (e.g., an intermediate under cross-signing might share the
same number as an external root or an unrelated intermediate).
When the next CRL rebuild happens, this issuer will then appear on
others issuers CRLs, if they validate this issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on revoking issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer revocation semantics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Notate that CRLs will be rebuilt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix timestamp field from _utc -> to _rfc3339
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serial-based accesses shows as revoked
Thanks Kit!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking default issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* impr(ssh): fix bug with allowed_users_template and add allowed_domains_template field in SSH role configuration, closes#10943
* chore: add changelog entry
* Allow Proof of Possession based revocation
Revocation by proof of possession ensures that we have a private key
matching the (provided or stored) certificate. This allows callers to
revoke certificate they own (as proven by holding the corresponding
private key), without having an admin create innumerable ACLs around
the serial_number parameter for every issuance/user.
We base this on Go TLS stack's verification of certificate<->key
matching, but extend it where applicable to ensure curves match, the
private key is indeed valid, and has the same structure as the
corresponding public key from the certificate.
This endpoint currently is authenticated, allowing operators to disable
the endpoint if it isn't desirable to use, via ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on ParseDERKey
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Leave revoke-with-key authenticated
After some discussion, given the potential for DoS (via submitting a lot
of keys/certs to validate, including invalid pairs), it seems best to
leave this as an authenticated endpoint. Presently in Vault, there's no
way to have an authenticated-but-unauthorized path (i.e., one which
bypasses ACL controls), so it is recommended (but not enforced) to make
this endpoint generally available by permissive ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API documentation on PoP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add acceptance tests for Proof of Possession
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exercise negative cases in PoP tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ignore EC PARAMETER blocks during issuer import
While older versions of Vault supported sending this, we broke such
support in 1.11. Ignore them from the manage issuers endpoint (which is
aliased to the old /config/ca path) -- but keep erring in the import
keys paths. The latter is a new endpoint not aliased to anything and
only expects a single PEM block.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add regression test for EC PARAMs during import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor serial creation to common helper
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add BYOC revocation to PKI mount
This allows operators to revoke certificates via a PEM blob passed to
Vault. In particular, Vault verifies the signature on the certificate
from an existing issuer within the mount, ensuring that one indeed
issued this certificate. The certificate is then added to storage and
its serial submitted for revocation.
This allows certificates generated with no_store=true to be submitted
for revocation afterwards, given a full copy of the certificate. As a
consequence, all roles can now safely move to no_store=true (if desired
for performance) and revocation can be done on a case-by-case basis.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on BYOC revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PEM length check to BYOC import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for BYOC
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Guard against legacy CA bundle usage
This prevents usage of the BYOC cert on a hybrid 1.10/1.12 cluster with
an non-upgraded CA issuer bundle.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This option is known to cause problems with large numbers of issued
certificates. Ensure admins are warned about the impact of this field
and encourage them to disable it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* Add PSS signature support to Vault PKI engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use issuer's RevocationSigAlg for CRL signing
We introduce a new parameter on issuers, revocation_signature_algorithm
to control the signature algorithm used during CRL signing. This is
because the SignatureAlgorithm value from the certificate itself is
incorrect for this purpose: a RSA root could sign an ECDSA intermediate
with say, SHA256WithRSA, but when the intermediate goes to sign a CRL,
it must use ECDSAWithSHA256 or equivalent instead of SHA256WithRSA. When
coupled with support for PSS-only keys, allowing the user to set the
signature algorithm value as desired seems like the best approach.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add use_pss, revocation_signature_algorithm docs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PSS to signature role issuance test matrix
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow roots to self-identify revocation alg
When using PSS support with a managed key, sometimes the underlying
device will not support PKCS#1v1.5 signatures. This results in CRL
building failing, unless we update the entry's signature algorithm
prior to building the CRL for the new root.
With a RSA-type key and use_pss=true, we use the signature bits value to
decide which hash function to use for PSS support.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add clearer error message on failed import
When CRL building fails during cert/key import, due to PSS failures,
give a better indication to the user that import succeeded its just CRL
building that failed. This tells them the parameter to adjust on the
issuer and warns that CRL building will fail until this is fixed.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add case insensitive SigAlgo matching
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Convert UsePSS back to regular bool
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor PSS->certTemplate into helper function
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Proper string output on rev_sig_alg display
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Copy root's SignatureAlgorithm for CRL building
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow old certs to be cross-signed
In Vault 1.11, we introduced cross-signing support, but the earlier SKID
field change in Vault 1.10 causes problems: notably, certs created on
older versions of Vault (<=1.9) or outside of Vault (with a different
SKID method) cannot be cross-signed and validated in OpenSSL.
In particular, OpenSSL appears to be unique in requiring a SKID/AKID
match for chain building. If AKID and SKID are present on an otherwise
valid client/parent cert pair and the values are different, OpenSSL will
not build a valid path over those two, whereas most other chain
validation implementations will.
Regardless, to have proper cross-signing support, we really aught to
support copying an SKID. This adds such support to the sign-intermediate
endpoint. Support for the /issue endpoint is not added, as cross-signing
leaf certs isn't generally useful and can accept random SKIDs.
Resolves: #16461
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback, fix tests
Also adds a known-answer test using LE R3 CA's SKID.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback regarding separators
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This decreases the total time to run the test suite significantly. From
the last PR, we were at 151s:
> [cipherboy@xps15 pki]$ go test -count=1 github.com/hashicorp/vault/builtin/logical/pki
> ok github.com/hashicorp/vault/builtin/logical/pki 151.182s
Now we're around 60s:
> [cipherboy@xps15 pki]$ go test -count=1 github.com/hashicorp/vault/builtin/logical/pki
> ok github.com/hashicorp/vault/builtin/logical/pki 61.838s
Notably, Go will correctly handle parallelizing tests across both
packages and within a package, so this shouldn't really impact test
runners (if they're already saturated).
The only gotcha in this approach is that the call to t.Run(...) becomes
effectively async; this means we either need to not mark the test as
parallel or shadow any loop variables inside the scope of the loop to
allow the t.Run to have the correct copy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Remove SHA1 for certs in prep for Go 1.18
* Remove certs with SHA1 from tests
* Use default SHA-256 with PKCS7 in AWS
* Update SHA1 deprecation note
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
This tells the user that the next step should be to configure AIA URLs
on this newly imported issuer/mount point. Ideally this should occur
before any leaves are issued such that they have the correct
information.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* use automtls for v5 secrets/auth plugins
* add automtls env guard
* start backend without metadata mode
* use PluginClientConfig for backend's NewPluginClient param
refactor
* - fix pluginutil test
- do not expect plugin to be unloaded in UT
- fix pluginutil tests --need new env var
- use require in UT
- fix lazy load test
* add changelog
* prioritize automtls; improve comments
* user multierror; refactor pluginSet for v4 unit test
* add test cases for v4 and v5 plugin versions
* remove unnecessary call to AutoMTLSSupported
* update comment on pluginSets
* use runconfig directly in sdk newpluginclient
* use automtls without metadatamode for v5 backend plugin registration
* use multierror for plugin runconfig calls
* remove some unnecessary code
* pki: When a role sets key_type to any ignore key_bits value when signing
- Bypass the validation for the role's key_bits value when signing CSRs
if the key_type is set to any. We still validate the key is at least
2048 for RSA backed CSRs as we did in 1.9.x and lower.
* VAULT-6613 add DetermineRoleFromLoginRequest function to Core
* Fix body handling
* Role resolution for rate limit quotas
* VAULT-6613 update precedence test
* Add changelog
* VAULT-6614 start of changes for roles in LCQs
* Expiration changes for leases
* Add role information to RequestAuth
* VAULT-6614 Test updates
* VAULT-6614 Add expiration test with roles
* VAULT-6614 fix comment
* VAULT-6614 Protobuf on OSS
* VAULT-6614 Add rlock to determine role code
* VAULT-6614 Try lock instead of rlock
* VAULT-6614 back to rlock while I think about this more
* VAULT-6614 Additional safety for nil dereference
* VAULT-6614 Use %q over %s
* VAULT-6614 Add overloading to plugin backends
* VAULT-6614 RLocks instead
* VAULT-6614 Fix return for backend factory
structs and mapstructure aren't really used within Vault much any more,
so we should start removing them. Luckily there was only one externally
accessible place where structs was used (AIA URLs config) so that was
easy to remove. The rest is mostly structure tag changes.
path_roles_tests.go relied on mapstructure in some places that broke,
but otherwise backend_test.go hasn't yet been modified to remove the
dependency on mapstructure. These didn't break as the underlying
CertBundle didn't get mapstructure support removed (as its in the SDK).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This will allow us to refactor the storage functions to take additional
parameters (or backend-inferred values) in the future. In particular, as
we look towards adding a storage cache layer, we'll need to add this to
the backend, which is now accessible from all storage functions.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
When tidy is called without arguments, we kick off a tidy operation with
no targets. This results in nothing being done, though the user might
reasonably expect some results.
Throw a warning in this case, so the user knows not to expect anything.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add database plugin metrics around connections
This is a replacement for #15923 that takes into account recent lock
cleanup.
I went ahead and added back in the hanging plugin test, which I meant to
add in #15944 but forgot.
I tested this by spinning up a statsd sink in the tests and verifying I
got a stream of metrics:
```
$ nc -u -l 8125 | grep backend
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:1.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:0.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:1.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:0.000000|g
```
We have to rework the shared gauge code to work without a full
`ClusterMetricSink`, since we don't have access to the core metrics from
within a plugin.
This only reports metrics every 10 minutes by default, but it solves
some problems we would have had with the gauge values becoming stale and
needing to be re-sent.
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Return errors on short PEM bundles (keys, issuers)
When users pass the path of the bundle to the API, rather than the
contents of the bundle (say, by omitting the `@` symbol on a Vault CLI
request), give a better error message indicating to the user what the
potential problem might be. While a larger bound for certificates was
given (75 bytes, likely 100 would be fine as well), a smaller bound had
to be chosen for keys as there's less standard DER encoding data around
them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add signature_bits to sign-intermediate
This endpoint was lacking the signature_bits field like all the other
endpoints. Notably, in #15478, the ability to customize the intermediate
CSR's signature bits was removed without checking for the ability to
customize the final (root-signed) intermediate certificate's value.
This adds in that missing ability, bringing us parity with root
generation and role-based signing.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add signature_bits to sign-verbatim
This endpoint was also lacking the signature_bits field, preventing
other signature hash functions from being utilized here.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for revocation under intermediate CA
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow revocation of certs with key-less issuers
In Vault 1.11's multiple issuer functionality, we incorrectly fetched
the full CA signing bundle for validating revocation of leaf certs (when
attempting to prohibit revocation of issuers in the mount). When the
issuer lacked a key (such as the root issuer on an intermediate mount),
this signing bundle creation failed.
Instead of fetching the full CA signing bundle, fetch instead the raw
certutil.CertBundle and parse it (to x509.Certificate form) ourselves.
This manifests as the error on revocation:
> URL: PUT http://127.0.0.1:8200/v1/pki_int/revoke
> * could not fetch the CA certificate for issuer id 156e1b99-4f04-5b5e-0036-cc0422c0c0d3: unable to fetch corresponding key for issuer 156e1b99-4f04-5b5e-0036-cc0422c0c0d3; unable to use this issuer for signing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Cleanup and simplify lock usage in database plugin
Following up from discussions in #15923 and #15933, I wanted to split
out a separate PR that drastically reduced the complexity of the use of
the databaseBackend lock. We no longer need it at all for the
`credRotationQueue`, and we can move it to be solely used in a few,
small connections map management functions.
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* ssh: Fix template regex test for defaultExtensions
- The regex to identify if our defaultExtensions contains a template was
a little too greedy, requiring the entire field to be just the regex. Allow
additional text within the value field to be added
* Add cl
* Add cn_validations PKI Role parameter
This new parameter allows disabling all validations on a common name,
enabled by default on sign-verbatim and issuer generation options.
Presently, the default behavior is to allow either an email address
(denoted with an @ in the name) or a hostname to pass validation.
Operators can restrict roles to just a single option (e.g., for email
certs, limit CNs to have strictly email addresses and not hostnames).
By setting the value to `disabled`, CNs of other formats can be accepted
without validating their contents against our minimal correctness checks
for email/hostname/wildcard that we typically apply even when broad
permissions (allow_any_name=true, enforce_hostnames=false, and
allow_wildcard_certificates=true) are granted on the role.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update PKI tests for cn_validation support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PKI API documentation on cn_validations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor role issuance tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.879s
After:
github.com/hashicorp/vault/builtin/logical/pki 1.063s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor role key bit tests to use direct backend
Also removes redundant cases.
Before:
github.com/hashicorp/vault/builtin/logical/pki 136.605s
After:
github.com/hashicorp/vault/builtin/logical/pki 24.713s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor common name test to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.767s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.611s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor device cert tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.725s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.402s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor invalid parameter test to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 3.777s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.021s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Alt Issuer tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.560s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.111s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor root idempotency tests to use direct backend
As a result, we've had to import a root cert from elsewhere in the test
suite, rather than using the one off the cluster.
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.399s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.523s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move PKI direct backend helpers to common location
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor OID SANs test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.284s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.808s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor allowed serial numbers test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.789s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.600s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor URI SANs to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.245s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.600s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Full Chain CA tests to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 14.503s
After:
github.com/hashicorp/vault/builtin/logical/pki 2.082s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update Allow Past CA tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.323s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.322s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Convert existing-key root test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.430s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.370s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor CRL enable/disable tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.738s
After:
github.com/hashicorp/vault/builtin/logical/pki 2.482s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update intermediate existing key tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.182s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.416s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Issuance TTL verification tests to use direct backend
Also shorten sleep duration slightly by precisely calculating it
relative to the actual cert life time.
Before:
github.com/hashicorp/vault/builtin/logical/pki 19.755s
After:
github.com/hashicorp/vault/builtin/logical/pki 11.521s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow reading Nomad CA/Client cert configuration
In the Nomad secret engine, writing to /nomad/config/access allows users
to specify a CA certificate and client credential pair. However, these
values are not in the read of the endpoint, making it hard for operators
to see if these values were specified and if they need to be rotated.
Add `ca_cert` and `client_cert` parameters to the response, eliding the
`client_key` parameter as it is more sensitive (and should most likely
be replaced at the same time as `client_cert`).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix tests to expect additional fields
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test with existing CA/client cert+key
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle func
* Update - check if key_type and key_bits are allowed
* Update - fields
* Generating keys based on provided key_type and key_bits
* Returning signed key
* Refactor
* Refactor update to common logic function
* Descriptions
* Tests added
* Suggested changes and tests added and refactored
* Suggested changes and fmt run
* File refactoring
* Changelog file
* Update changelog/15561.txt
Co-authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Suggested changes - consistent returns and additional info to test messages
* ssh issue key pair documentation
Co-authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
- Selecting a constant default value exposed a possible edge case
that the migration would fail if a previous migration contained the
same issuer or key name.
* Add parsing for NSS-wrapped Ed25519 keys
NSS wraps Ed25519 using the PKCS#8 standard structure. The Go standard
library as of Go 1.18.x doesn't support parsing this key type with the
OID used by NSS; it requires the 1.3.101.112/RFC 8410 format, rather
than the RFC 5915-esque structure supported here.
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add integration test with NSS-created wrapped key
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
* Support for CPS URLs in Custom Policy Identifiers.
* go fmt
* Add Changelog
* Fix panic in test-cases.
* Update builtin/logical/pki/path_roles.go
Fix intial nil identifiers.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Make valid policy OID so don't break ASN parse in test.
* Add test cases.
* go fmt.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
- Do not set the first issuer we attempt to import as the default issuer unless
it has a corresponding key.
- Add the ability to set a default issuer if none exist and we import it's corresponding key after the fact.
- Add a warning to an end-user if we imported multiple issuers with keys and we
choose one of them as the default value.
Update AWS auth method certificates
Add tests that the `rsa2048` document can also be verified using the
`pkcs7` field for AWS auth.
Due to the use of SHA-1-based signatures for the `identity` and `pkcs7`
methods, we want to encourage moving toward using the RSA 2048 workflow,
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/verify-rsa2048.html
This doesn't require code changes for Vault necessarily, but adding in
the (many) certificates will help end users.
Also adds `rsa2048` option to API to fetch the RSA 2048 signature.
I will make a PR to update to the AWS auth docs to document the RSA 2048
flow soon after this.
* Add integration tests for aliased PKI paths (root/rotate, root/replace)
- Add tests for the two api endpoints
- Also return the issuer_name field within the generate root api response
* Add key_name to generate root api endpoint response and doc updates
- Since we are now returning issuer_name, we should also return key_name
- Update the api-docs for the generate root endpoint responses and add
missing arguments that we accept.
* WIP replacing lib/pq
* change timezome param to be URI format
* add changelog
* add changelog for redshift
* update changelog
* add test for DSN style connection string
* more parseurl and quoteidentify to sdk; include copyright and license
* call dbutil.ParseURL instead, fix import ordering
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* Allow role-based sign-verbatim with chosen issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning with missing requested verbatim role
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pki/backend.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Fix handling of username_as_alias during LDAP authentication
There is a bug that was introduced in the LDAP authentication method by https://github.com/hashicorp/vault/pull/11000.
It was thought to be backward compatible but has broken a number of users. Later
a new parameter `username_as_alias` was introduced in https://github.com/hashicorp/vault/pull/14324
to make it possible for operators to restore the previous behavior.
The way it is currently working is not completely backward compatible thought
because when username_as_alias is set, a call to GetUserAliasAttributeValue() will
first be made, then this value is completely discarded in pathLogin() and replaced
by the username as expected.
This is an issue because it makes useless calls to the LDAP server and will break
backward compatibility if one of the constraints in GetUserAliasAttributeValue()
is not respected, even though the resulting value will be discarded anyway.
In order to maintain backward compatibility here we have to only call
GetUserAliasAttributeValue() if necessary.
Since this change of behavior was introduced in 1.9, this fix will need to be
backported to the 1.9, 1.10 and 1.11 branches.
* Add changelog
* Add tests
* Format code
* Update builtin/credential/ldap/backend.go
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* Format and fix declaration
* Reword changelog
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* Add tests for role patching
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent bad issuer names on update
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on PATCH operations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a warning when Issuing Certificate set on a role does not resolve.
* Ivanka's requests - add a warning on deleting issuer or changing it's name.
* Fix nil checks; reduce number of roles to iterate through; only verify roles after migration.
* Fix semgrep failure, ignore roles deleted behind our back.
* Patch functionality for roles
* Make Patch Roles work again, add back patch issuers.
* Add changelog.
* Fix nil-reversion on empty response.
* Panics are bad. don't do that.
* Return signed ca as part of ca_chain field within sign-intermediate
- When signing a CA certificate we should include it along with the signing CA's CA chain in the response.
* PKI - Add not_before_duration API parameter to:
- Root CA generation
- Intermediate CA generation
- Intermediate CA signing
* Move not_before_duration to addCACommonFields
This gets applied on both root generation and intermediate signing,
which is the correct place to apply this.
Co-authored-by: guysv <sviryguy@gmail.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Resolves: #10631
Co-authored-by: guysv <sviryguy@gmail.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case for root/generate, sign-intermediate
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update path role description
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new not_before_duration to relevant docs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: guysv <sviryguy@gmail.com>
* Add warning on missing AIA info fields
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog:
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a warning when Issuing Certificate set on a role does not resolve.
* Ivanka's requests - add a warning on deleting issuer or changing it's name.
* reduce number of roles to iterate through; only verify roles after migration. ignore roles deleted behind our back.
* Protect against key and issuer name re-use
- While importing keys and issuers verify that the provided name if any has not been used by another key that we did not match against.
- Validate an assumption within the key import api, that we were provided a single key
- Add additional tests on the new key generation and key import handlers.
* Protect key import api end-users from using "default" as a name
- Do not allow end-users to provide the value of default as a name for key imports
as that would lead to weird and wonderful behaviors to the end-user.
* Add missing api-docs for PKI key import
* Warn on empty Subject field for issuers
When generating a root or signing an intermediate certificate, it is
possible to have Vault generate a certificate with an empty Subject.
These don't validate in most TLS implementations well, so add a warning.
Note that non-Common Name fields could be present to make a non-empty
subject, so simply requiring a CommonName isn't strictly the best.
For example:
$ vault write pki/root/generate/exported common_name=""
WARNING! The following warnings were returned from Vault:
* This issuer certificate was generated without a Subject; this makes
it likely that issuing leaf certs with this certificate will cause TLS
validation libraries to reject this certificate.
....
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove signature_bits on intermediate generate
This extraneous field wasn't respected during intermediate generation
and it isn't clear that it should be. Strictly, this field, if it were
to exist, would control the CSR's internal signature algorithm (certutil
defaults to the sane SHA-256 here). However, there's little value in
changing this as the signing authority can and probably will override
the final certificate's signature bits value, completely ignoring
whatever was in the provided CSR.
Removing this field will now cause warnings for those providing the
parameter (which already wasn't respected), which is the desired
behavior. No breakage should occur as a result of this change.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always return non-nil CRL configuration
When using the default CRL configuration (as none has been set), return
the default configuration rather than inferring it in buildCRL. This
additionally allows us to return the default configuration on GET
operations to /config/crl.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always return non-nil URL configuration
When using the default (empty) URL configuration as none has been set,
return the default configuration rather than inferring it inside of
fetchCAInfoByIssuerId or generateCert. This additionally allows us to
return the default configuration on GET operations to /config/urls.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* secret/pki: Return correct algorithm type from key fetch api for managed keys
- fix an issue that key_type field returned from the key fetch api had
the ManagedPrivateKey type instead of the real algorithm of the managed key.
* Remove key_type from key list PKI operation. Partial revert of #15435
- The key_type field should be used solely for the key algorithm but as implemented
we would be returning the value ManagedPrivateKey for managed keys which is not
in sync with the rest of the apis. We also did not want to take the performance
hit if many managed keys existed so we will simply remove the field from the list
operation
- No point in writing any logs if no previous bundle exists
- Only log output and schedule a CRL rebuild is we actually migration something
- Do not log on PKI storage version set/checks.
* Use "not_before_duration" fiueld from role if above 0
* 'test' and update docs
* changelog file
* Requested changes - improved test and better description to changelog
* changelog description:
* update to ttl and not_before_duration API docs
* Use new parseutil helper: Safe variants
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update parseutil to v0.1.5
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix additional integer overflow in command/server
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* add import endpoint
* fix unlock
* add import_version
* refactor import endpoints and add tests
* add descriptions
* Update dependencies to include tink for Transit import operations. Convert Transit wrapping key endpoint to use shared wrapping key retrieval method. Disallow import of convergent keys to Transit via BYOK process.
* Include new 'hash_function' parameter on Transit import endpoints to specify OAEP random oracle hash function used to wrap ephemeral AES key.
* Add default values for Transit import endpoint fields. Prevent an OOB panic in Transit import. Proactively zero out ephemeral AES key used in Transit imports.
* Rename some Transit BYOK import variables. Ensure Transit BYOK ephemeral key is of the size specified byt the RFC.
* Add unit tests for Transit BYOK import endpoint.
* Simplify Transit BYOK import tests. Add a conditional on auto rotation to avoid errors on BYOK keys with allow_rotation=false.
* Added hash_function field to Transit import_version endpoint. Reworked Transit import unit tests. Added unit tests for Transit import_version endpoint.
* Add changelog entry for Transit BYOK.
* Transit BYOK formatting fixes.
* Omit 'convergent_encryption' field from Transit BYOK import endpoint, but reject with an error when the field is provided.
* Minor formatting fix in Transit import.
Co-authored-by: rculpepper <rculpepper@hashicorp.com>
* Add default timeout to legacy ssh.ClientConfig
When using the deprecated Dynamic SSH Keys method, Vault will make an
outbound SSH connection to an arbitrary remote host to place SSH keys.
We now set a timeout of 1 minute for this connection.
It is strongly recommended consumers of this SSH secrets engine feature
migrate to the more secure, and otherwise equivalent, SSH certificates
method.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This shows whether the specified key or issuer is default, along with
the private key type in the case of a LIST /keys (authenticated) call.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* POC of Okta Auth Number Challenge verification
* switch from callbacks to operations, forward validate to primary
* cleanup and nonce description update
* add changelog
* error on empty nonce, no forwarding, return correct_answer instead
* properly clean up verify goroutine
* add docs on new endpoint and parameters
* change polling frequency when WAITING to 1s
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
* Add CRL checking to chain building tests
This should ensure that, with our complex issuer setups, we can revoke
the issued certificates correctly and they'll show up on the correct
CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix related issuer detection in CRL building
When building our mapping of issuers, we incorrectly used the issuer's
RawIssuer field to construct the mapping, rather than the issuer's
RawSubject. This caused us to not correctly detect the cross-signed
issuers as having the same CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address issues with revoke operations pre-migration of PKI issuers
- Leverage the legacyBundleShimID though out the path of CRL building
when legacy storage mode is active.
- Instead of having multiple locations without a lock checking for the
useLegacyBundleCaStorage flag is set, check it once and then use the
same issuerId everywhere
- Address some locking issues that might lead to a bad read/write when
switching from legacy to non-legacy mode on startup and post-migration
* Add test suite for PKI apis pre-migration to new issuer storage format
- Add tests that validate all apis work as expected in pre-migration mode
- Add tests for apis that we don't expect to work, they should return a
migration related error message
- Add some missing validations on various new apis.
* Refactor chain building test cases to be shared
This will allow us to execute these test cases and then benchmark just
the chain building, separate from the certificate creation (and without
the consistency tests).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Benchmark chain building code
Using the existing test cases (and a few special ones), generate some
simple chains and benchmark how long chain building takes. We switch
from generating a cluster (slow) to directly calling
createBackendWithStorage(), which improves test execution time too:
$ go test -count=1 -run=Test_CAChainBuilding github.com/hashicorp/vault/builtin/logical/pki
ok github.com/hashicorp/vault/builtin/logical/pki 0.764s
(previously it was 5-10 seconds, for fewer tests).
Additionally, we now have benchmarks:
$ go test -v -run=BenchmarkChainBuilding -bench=. github.com/hashicorp/vault/builtin/logical/pki
goos: linux
goarch: amd64
pkg: github.com/hashicorp/vault/builtin/logical/pki
cpu: Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz
BenchmarkChainBuilding
BenchmarkChainBuilding/test-case-0
BenchmarkChainBuilding/test-case-0-16 616 1921783 ns/op
BenchmarkChainBuilding/test-case-1
BenchmarkChainBuilding/test-case-1-16 1191 998201 ns/op
BenchmarkChainBuilding/test-case-2
BenchmarkChainBuilding/test-case-2-16 547 2229810 ns/op
BenchmarkChainBuilding/test-case-3
BenchmarkChainBuilding/test-case-3-16 525 2264951 ns/op
BenchmarkChainBuilding/test-case-4
BenchmarkChainBuilding/test-case-4-16 1732 693686 ns/op
BenchmarkChainBuilding/test-case-5
BenchmarkChainBuilding/test-case-5-16 51700 23230 ns/op
BenchmarkChainBuilding/test-case-6
BenchmarkChainBuilding/test-case-6-16 9343 124523 ns/op
BenchmarkChainBuilding/test-case-7
BenchmarkChainBuilding/test-case-7-16 5106 234902 ns/op
BenchmarkChainBuilding/test-case-8
BenchmarkChainBuilding/test-case-8-16 2334 494382 ns/op
PASS
ok github.com/hashicorp/vault/builtin/logical/pki 12.707s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Do not grab a lock within the requestRebuildIfActiveNode function
to avoid issues being called from the invalidate function
- Leverage more atmoic operations, and only grab the lock if we are
going to perform the rebuild.
Previously we'd return the raw enum value, which the entity accessing
the API wouldn't have any easy way of translating back into string
values. Return the string value directly instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Leverage a Get lookup operation to see if our reference field is a UUID
instead of listing all key/issuers and iterating over the list.
- This should be faster and we get a cached lookup possibly if it was a
UUID entry that we previously loaded.
- Address some small feedback about migration wording as well.
* Return the ca_chain response from root issued cert api
* Fix parent selection in cert chain building
When building chains, we'd choose the next neighbor from Go's
unordered map. However, this doesn't necessarily result in the most
optimal path: we want to prefer to visit roots over other
intermediates, as this allows us to have a more consistent chain,
putting roots before their cross-signed equivalents rather than
potentially at the end.
We additionally now ensure chains are stable.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steve Clark <steven.clark@hashicorp.com>
- Validate the key_type and key_bits arguments that were provided and
perform the same default processing of 0 as we used to do for the
generateRoot/generateIntermediate apis
- Add a test that validates the behaviour
- Update the field description blurbs.
* Move existing test helpers into a new test_helpers.go file within PKI
* Compare issuer certificates by cert, signature algo and signature
- Instead of comparing the strings of a certificate, instead leverage
the Go Raw attribute within a parsed certificate to compare. The Raw
attribute is a byte array of an ASN.1 DER containing the cert,
signature algo and signature.
- Rework a bit of the importIssuers function as well to fail checks on the
inbound issuer earlier as well as load keys/issuers just before we need
them
* Prevent revocation of issuers using revokeCert
Similar to the existing behavior, we'll prevent the revocation of
existing issuer certificates from the existing /revoke/:serial endpoint
for now. This is because a serial number alone is not enough information
(in the worst case) to precisely identify an issuer (as intermediates
signed by two separate external (e.g., OpenSSL) CAs using incremental
serial numbers might have the same serial number).
Additionally, we fix revoking certs on performance secondary clusters,
when they've not yet been migrated.
In a separate change, we'll open up a separate code path to revoke
issuers, ensuring we know exactly which issuer is revoked (and which CRL
it should belong on at time of revocation).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking expired cert
This prevents confusion when a nil response (with no revocation info) is
returned; requesters are informed that the specified certificate has
already expired.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Starter PKI CA Storage API (#14796)
* Simple starting PKI storage api for CA rotation
* Add key and issuer storage apis
* Add listKeys and listIssuers storage implementations
* Add simple keys and issuers configuration storage api methods
* Handle resolving key, issuer references
The API context will usually have a user-specified reference to the key.
This is either the literal string "default" to select the default key,
an identifier of the key, or a slug name for the key. Here, we wish to
resolve this reference to an actual identifier that can be understood by
storage.
Also adds the missing Name field to keys.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add method to fetch an issuer's cert bundle
This adds a method to construct a certutil.CertBundle from the specified
issuer identifier, optionally loading its corresponding key for signing.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor certutil PrivateKey PEM handling
This refactors the parsing of PrivateKeys from PEM blobs into shared
methods (ParsePEMKey, ParseDERKey) that can be reused by the existing
Bundle parsing logic (ParsePEMBundle) or independently in the new
issuers/key-based PKI storage code.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add importKey, importCert to PKI storage
importKey is generally preferable to the low-level writeKey for adding
new entries. This takes only the contents of the private key (as a
string -- so a PEM bundle or a managed key handle) and checks if it
already exists in the storage.
If it does, it returns the existing key instance.
Otherwise, we create a new one. In the process, we detect any issuers
using this key and link them back to the new key entry.
The same holds for importCert over importKey, with the note that keys
are not modified when importing certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for importing issuers, keys
This adds tests for importing keys and issuers into the new storage
layout, ensuring that identifiers are correctly inferred and linked.
Note that directly writing entries to storage (writeKey/writeissuer)
will take KeyID links from the parent entry and should not be used for
import; only existing entries should be updated with this info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Implement PKI storage migration.
- Hook into the backend::initialize function, calling the migration on a primary only.
- Migrate an existing certificate bundle to the new issuers and key layout
* Make fetchCAInfo aware of new storage layout
This allows fetchCAInfo to fetch a specified issuer, via a reference
parameter provided by the user. We pass that into the storage layer and
have it return a cert bundle for us. Finally, we need to validate that
it truly has the key desired.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Begin /issuers API endpoints
This implements the fetch operations around issuers in the PKI Secrets
Engine. We implement the following operations:
- LIST /issuers - returns a list of known issuers' IDs and names.
- GET /issuer/:ref - returns a JSON blob with information about this
issuer.
- POST /issuer/:ref - allows configuring information about issuers,
presently just its name.
- DELETE /issuer/:ref - allows deleting the specified issuer.
- GET /issuer/:ref/{der,pem} - returns a raw API response with just
the DER (or PEM) of the issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add import to PKI Issuers API
This adds the two core import code paths to the API:
/issuers/import/cert and /issuers/import/bundle. The former differs from
the latter in that the latter allows the import of keys. This allows
operators to restrict importing of keys to privileged roles, while
allowing more operators permission to import additional certificates
(not used for signing, but instead for path/chain building).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-intermediate endpoint
This endpoint allows existing issuers to be used to sign intermediate
CA certificates. In the process, we've updated the existing
/root/sign-intermediate endpoint to be equivalent to a call to
/issuer/default/sign-intermediate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-self-issued endpoint
This endpoint allows existing issuers to be used to sign self-signed
certificates. In the process, we've updated the existing
/root/sign-self-issued endpoint to be equivalent to a call to
/issuer/default/sign-self-issued.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-verbatim endpoint
This endpoint allows existing issuers to be used to directly sign CSRs.
In the process, we've updated the existing /sign-verbatim endpoint to be
equivalent to a call to /issuer/:ref/sign-verbatim.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow configuration of default issuers
Using the new updateDefaultIssuerId(...) from the storage migration PR
allows for easy implementation of configuring the default issuer. We
restrict callers from setting blank defaults and setting default to
default.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix fetching default issuers
After setting a default issuer, one should be able to use the old /ca,
/ca_chain, and /cert/{ca,ca_chain} endpoints to fetch the default issuer
(and its chain). Update the fetchCertBySerial helper to no longer
support fetching the ca and prefer fetchCAInfo for that instead (as
we've already updated that to support fetching the new issuer location).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/{sign,issue}/:role
This updates the /sign and /issue endpoints, allowing them to take the
default issuer (if none is provided by a role) and adding
issuer-specific versions of them.
Note that at this point in time, the behavior isn't yet ideal (as
/sign/:role allows adding the ref=... parameter to override the default
issuer); a later change adding role-based issuer specification will fix
this incorrect behavior.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support root issuer generation
* Add support for issuer generate intermediate end-point
* Update issuer and key arguments to consistent values
- Update all new API endpoints to use the new agreed upon argument names.
- issuer_ref & key_ref to refer to existing
- issuer_name & key_name for new definitions
- Update returned values to always user issuer_id and key_id
* Add utility methods to fetch common ref and name arguments
- Add utility methods to fetch the issuer_name, issuer_ref, key_name and key_ref arguments from data fields.
- Centralize the logic to clean up these inputs and apply various validations to all of them.
* Rename common PKI backend handlers
- Use the buildPath convention for the function name instead of common...
* Move setting PKI defaults from writeCaBundle to proper import{keys,issuer} methods
- PR feedback, move setting up the default configuration references within
the import methods instead of within the writeCaBundle method. This should
now cover all use cases of us setting up the defaults properly.
* Introduce constants for issuer_ref, rename isKeyDefaultSet...
* Fix legacy PKI sign-verbatim api path
- Addresses some test failures due to an incorrect refactoring of a legacy api
path /sign-verbatim within PKI
* Use import code to handle intermediate, config/ca
The existing bundle import code will satisfy the intermediate import;
use it instead of the old ca_bundle import logic. Additionally, update
/config/ca to use the new import code as well.
While testing, a panic was discovered:
> reflect.Value.SetMapIndex: value of type string is not assignable to type pki.keyId
This was caused by returning a map with type issuerId->keyId; instead
switch to returning string->string maps so the audit log can properly
HMAC them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on missing defaults
When the default issuer and key are missing (and haven't yet been
specified), we should clarify that error message.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update test semantics for new changes
This makes two minor changes to the existing test suite:
1. Importing partial bundles should now succeed, where they'd
previously error.
2. fetchCertBySerial no longer handles CA certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for deleting all keys, issuers
The old DELETE /root code must now delete all keys and issuers for
backwards compatibility. We strongly suggest calling individual delete
methods (DELETE /key/:key_ref or DELETE /issuer/:issuer_ref) instead,
for finer control.
In the process, we detect whether the deleted key/issuers was set as the
default. This will allow us to warn (from the single key/deletion issuer
code) whether or not the default was deleted (while allowing the
operation to succeed).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Introduce defaultRef constant within PKI
- Replace hardcoded "default" references with a constant to easily identify various usages.
- Use the addIssuerRefField function instead of redefining the field in various locations.
* Rework PKI test TestBackend_Root_Idempotency
- Validate that generate/root calls are no longer idempotent, but the bundle importing
does not generate new keys/issuers
- As before make sure that the delete root api resets everything
- Address a bug within the storage that we bombed when we had multiple different
key types within storage.
* Assign Name=current to migrated key and issuer
- Detail I missed from the RFC was to assign the Name field as "current" for migrated key and issuer.
* Build CRL upon PKI intermediary set-signed api called
- Add a call to buildCRL if we created an issuer within pathImportIssuers
- Augment existing FullCAChain to verify we have a proper CRL post set-signed api call
- Remove a code block writing out "ca" storage entry that is no longer used.
* Identify which certificate or key failed
When importing complex chains, we should identify in which certificate
or key the failure occurred.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI migration writes out empty migration log entry
- Since the elements of the struct were not exported we serialized an empty
migration log to disk and would re-run the migration
* Add chain-building logic to PKI issuers path
With the one-entry-per-issuer approach, CA Chains become implicitly
constructed from the pool of issuers. This roughly matches the existing
expectations from /config/ca (wherein a chain could be provided) and
/intemediate/set-signed (where a chain may be provided). However, in
both of those cases, we simply accepted a chain. Here, we need to be
able to reconstruct the chain from parts on disk.
However, with potential rotation of roots, we need to be aware of
disparate chains. Simply concating together all issuers isn't
sufficient. Thus we need to be able to parse a certificate's Issuer and
Subject field and reconstruct valid (and potentially parallel)
parent<->child mappings.
This attempts to handle roots, intermediates, cross-signed
intermediates, cross-signed roots, and rotated keys (wherein one might
not have a valid signature due to changed key material with the same
subject).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Return CA Chain when fetching issuers
This returns the CA Chain attribute of an issuer, showing its computed
chain based on other issuers in the database, when fetching a specific
issuer.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add testing for chain building
Using the issuance infrastructure, we generate new certificates (either
roots or intermediates), positing that this is roughly equivalent to
importing an external bundle (minus error handling during partial
imports). This allows us to incrementally construct complex chains,
creating reissuance cliques and cross-signing cycles.
By using ECDSA certificates, we avoid high signature verification and
key generation times.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow manual construction of issuer chain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix handling of duplicate names
With the new issuer field (manual_chain), we can no longer err when a
name already exists: we might be updating the existing issuer (with the
same name), but changing its manual_chain field. Detect this error and
correctly handle it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for manual chain building
We break the clique, instead building these chains manually, ensuring
that the remaining chains do not change and only the modified certs
change. We then reset them (back to implicit chain building) and ensure
we get the same results as earlier.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add stricter verification of issuers PEM format
This ensures each issuer is only a single certificate entry (as
validated by count and parsing) without any trailing data.
We further ensure that each certificate PEM has leading and trailing
spaces removed with only a single trailing new line remaining.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix full chain building
Don't set the legacy IssuingCA field on the certificate bundle, as we
prefer the CAChain field over it.
Additionally, building the full chain could result in duplicate
certificates when the CAChain included the leaf certificate itself. When
building the full chain, ensure we don't include the bundle's
certificate twice.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add stricter tests for full chain construction
We wish to ensure that each desired certificate in the chain is only
present once.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename PKI types to avoid constant variable name collisions
keyId -> keyID
issuerId -> issuerID
key -> keyEntry
issuer -> issuerEntry
keyConfig -> keyConfigEntry
issuerConfig -> issuerConfigEntry
* Update CRL handling for multiple issuers
When building CRLs, we've gotta make sure certs issued by that issuer
land up on that issuer's CRL and not some other CRL. If no CRL is
found (matching a cert), we'll place it on the default CRL.
However, in the event of equivalent issuers (those with the same subject
AND the same key material) -- perhaps due to reissuance -- we'll only
create a single (unified) CRL for them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow fetching updated CRL locations
This updates fetchCertBySerial to support querying the default issuer's
CRL.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove legacy CRL storage location test case
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update to CRLv2 Format to copy RawIssuer
When using the older Certificate.CreateCRL(...) call, Go's x509 library
copies the parsed pkix.Name version of the CRL Issuer's Subject field.
For certain constructed CAs, this fails since pkix.Name is not suitable
for round-tripping. This also builds a CRLv1 (per RFC 5280) CRL.
In updating to the newer x509.CreateRevocationList(...) call, we can
construct the CRL in the CRLv2 format and correctly copy the issuer's
name. However, this requires holding an additional field per-CRL, the
CRLNumber field, which is required in Go's implementation of CRLv2
(though OPTIONAL in the spec). We store this on the new
LocalCRLConfigEntry object, per-CRL.
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add comment regarding CRL non-assignment in GOTO
In previous versions of Vault, it was possible to sign an empty CRL
(when the CRL was disabled and a force-rebuild was requested). Add a
comment about this case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow fetching the specified issuer's CRL
We add a new API endpoint to fetch the specified issuer's CRL directly
(rather than the default issuer's CRL at /crl and /certs/crl). We also
add a new test to validate the CRL in a multi-root scenario and ensure
it is signed with the correct keys.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new PKI key prefix to seal wrapped storage (#15126)
* Refactor common backend initialization within backend_test
- Leverage an existing helper method within the PKI backend tests to setup a PKI backend with storage.
* Add ability to read legacy cert bundle if the migration has not occurred on secondaries.
- Track the migration state forbidding an issuer/key writing api call if we have not migrated
- For operations that just need to read the CA bundle, use the same tracking variable to
switch between reading the legacy bundle or use the new key/issuer storage.
- Add an invalidation function that will listen for updates to our log path to refresh the state
on secondary clusters.
* Always write migration entry to trigger secondary clusters to wake up
- Some PR feedback and handle a case in which the primary cluster does
not have a CA bundle within storage but somehow a secondary does.
* Update CA Chain to report entire chain
This merges the ca_chain JSON field (of the /certs/ca_chain path) with
the regular certificate field, returning the root of trust always. This
also affects the non-JSON (raw) endpoints as well.
We return the default issuer's chain here, rather than all known issuers
(as that may not form a strict chain).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow explicit issuer override on roles
When a role is used to generate a certificate (such as with the sign/
and issue/ legacy paths or the legacy sign-verbatim/ paths), we prefer
that issuer to the one on the request. This allows operators to set an
issuer (other than default) for requests to be issued against,
effectively making the change no different from the users' perspective
as it is "just" a different role name.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for role-based issuer selection
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Expand NotAfter limit enforcement behavior
Vault previously strictly enforced NotAfter/ttl values on certificate
requests, erring if the requested TTL extended past the NotAfter date of
the issuer. In the event of issuing an intermediate, this behavior was
ignored, instead permitting the issuance.
Users generally do not think to check their issuer's NotAfter date when
requesting a certificate; thus this behavior was generally surprising.
Per RFC 5280 however, issuers need to maintain status information
throughout the life cycle of the issued cert. If this leaf cert were to
be issued for a longer duration than the parent issuer, the CA must
still maintain revocation information past its expiration.
Thus, we add an option to the issuer to change the desired behavior:
- err, to err out,
- permit, to permit the longer NotAfter date, or
- truncate, to silently truncate the expiration to the issuer's
NotAfter date.
Since expiration of certificates in the system's trust store are not
generally validated (when validating an arbitrary leaf, e.g., during TLS
validation), permit should generally only be used in that case. However,
browsers usually validate intermediate's validity periods, and thus
truncate should likely be used (as with permit, the leaf's chain will
not validate towards the end of the issuance period).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for expanded issuance behaviors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning on keyless default issuer (#15178)
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update PKI to new Operations framework (#15180)
The backend Framework has updated Callbacks (used extensively in PKI) to
become deprecated; Operations takes their place and clarifies forwarding
of requests.
We switch to the new format everywhere, updating some bad assumptions
about forwarding along the way. Anywhere writes are handled (that should
be propagated to all nodes in all clusters), we choose to forward the
request all the way up to the performance primary cluster's primary
node. This holds for issuers/keys, roles, and configs (such as CRL
config, which is globally set for all clusters despite all clusters
having their own separate CRL).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Kitography/vault 5474 rebase (#15150)
* These parts work (put in signature so that backend wouldn't break, but missing fields, desc, etc.)
* Import and Generate API calls w/ needed additions to SDK.
* make fmt
* Add Help/Sync Text, fix some of internal/exported/kms code.
* Fix PEM/DER Encoding issue.
* make fmt
* Standardize keyIdParam, keyNameParam, keyTypeParam
* Add error response if key to be deleted is in use.
* replaces all instances of "default" in code with defaultRef
* Updates from Callbacks to Operations Function with explicit forwarding.
* Fixes a panic with names not being updated everywhere.
* add a logged error in addition to warning on deleting default key.
* Normalize whitespace upon importing keys.
Authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix isKeyInUse functionality.
* Fixes tests associated with newline at end of key pem.
* Add alternative proposal PKI aliased paths (#15211)
* Add aliased path for root/rotate/:exported
This adds a user-friendly path name for generating a rotated root. We
automatically choose the name "next" for the newly generated root at
this path if it doesn't already exist.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add aliased path for intermediate/cross-sign
This allows cross-signatures to work.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add path for replacing the current root
This updates default to point to the value of the issuer with name
"next" rather than its current value.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove plural issuers/ in signing paths
These paths use a single issuer and thus shouldn't include the plural
issuers/ as a path prefix, instead using the singular issuer/ path
prefix.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Only warn if default issuer was imported
When the default issuer was not (re-)imported, we'd fail to find it,
causing an extraneous warning about missing keys, even though this
issuer indeed had a key.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing issuer sign/issue paths
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up various warnings within the PKI package (#15230)
* Rebuild CRLs on secondary performance clusters post migration and on new/updated issuers
- Hook into the backend invalidation function so that secondaries are notified of
new/updated issuer or migrations occuring on the primary cluster. Upon notification
schedule a CRL rebuild to take place upon the next process to read/update the CRL
or within the periodic function if no request comes in.
* Schedule rebuilding PKI CRLs on active nodes only
- Address an issue that we were scheduling the rebuilding of a CRL on standby
nodes, which would not be able to write to storage.
- Fix an issue with standby nodes not correctly determining that a migration previously
occurred.
* Return legacy CRL storage path when no migration has occurred.
* Handle issuer, keys locking (#15227)
* Handle locking of issuers during writes
We need a write lock around writes to ensure serialization of
modifications. We use a single lock for both issuer and key
updates, in part because certain operations (like deletion) will
potentially affect both.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing b.useLegacyBundleCaStorage guards
Several locations needed to guard against early usage of the new issuers
endpoint pre-migration.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address PKI to properly support managed keys (#15256)
* Address codebase for managed key fixes
* Add proper public key comparison for better managed key support to importKeys
* Remove redundant public key fetching within PKI importKeys
* Correctly handle rebuilding remaining chains
When deleting a specific issuer, we might impact the chains. From a
consistency perspective, we need to ensure the remaining chains are
correct and don't refer to the since-deleted issuer, so trigger a full
rebuild here.
We don't need to call this in the delete-the-world (DELETE /root) code
path, as there shouldn't be any remaining issuers or chains to build.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove legacy CRL bundle on world deletion
When calling DELETE /root, we should remove the legacy CRL bundle, since
we're deleting the legacy CA issuer bundle as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove deleted issuers' CRL entries
Since CRLs are no longer resolvable after deletion (due to missing
issuer ID, which will cause resolution to fail regardless of if an ID or
a name/default reference was used), we should delete these CRLs from
storage to avoid leaking them.
In the event that this issuer comes back (with key material), we can
simply rebuild the CRL at that time (from the remaining revoked storage
entries).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add unauthed JSON fetching of CRLs, Issuers (#15253)
Default to fetching JSON CRL for consistency
This makes the bare issuer-specific CRL fetching endpoint return the
JSON-wrapped CRL by default, moving the DER CRL to a specific endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add JSON-specific endpoint for fetching issuers
Unlike the unqualified /issuer/:ref endpoint (which also returns JSON),
we have a separate /issuer/:ref/json endpoint to return _only_ the
PEM-encoded certificate and the chain, mirroring the existing /cert/ca
endpoint but for a specific issuer. This allows us to make the endpoint
unauthenticated, whereas the bare endpoint would remain authenticated
and usually privileged.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add tests for raw JSON endpoints
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add unauthenticated issuers endpoints to PKI table
This adds the unauthenticated issuers endpoints?
- LIST /issuers,
- Fetching _just_ the issuer certificates (in JSON/DER/PEM form), and
- Fetching the CRL of this issuer (in JSON/DER/PEM form).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add issuer usage restrictions bitset
This allows issuers to have usage restrictions, limiting whether they
can be used to issue certificates or if they can generate CRLs. This
allows certain issuers to not generate a CRL (if the global config is
with the CRL enabled) or allows the issuer to not issue new certificates
(but potentially letting the CRL generation continue).
Setting both fields to false effectively forms a soft delete capability.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI Pod rotation Add Base Changelog (#15283)
* PKI Pod rotation changelog.
* Use feature release-note formatting of changelog.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Co-authored-by: Kit Haines <kit.haines@hashicorp.com>
Co-authored-by: kitography <khaines@mit.edu>
* add wrapping key endpoint
* change how wrapping key is stored
* move wrapping key func to backend
* refactor wrapping key generation
* Initial unit tests for Transit wrapping key endpoint
* Wire up wrapping key unit tests to actual implementation.
* Clean up Transit BYOK wrapping key tests and imports.
* Fix Transit wrapping key endpoint formatting.
* Update transit wrapping key to use lock manager for safe concurrent use.
* Rename some Transit wrapping key variables. Ensure the Transit wrapping key is correctly typed and formatted in a unit test.
* Fix spacing issue in Transit wrapping key endpoint help string.
Co-authored-by: rculpepper <rculpepper@hashicorp.com>
* Allow callers to choose the entropy source for the random endpoints
* Put source in the URL for sys as well
* changelog
* docs
* Fix unit tests, and add coverage
* refactor to use a single common implementation
* Update documentation
* one more tweak
* more cleanup
* Readd lost test expected code
* fmt
VAULT-5827 Don't prepare SQL queries before executing them
We don't support proper prepared statements, i.e., preparing once and
executing many times since we do our own templating. So preparing our
queries does not really accomplish anything, and can have severe
performance impacts (see
https://github.com/hashicorp/vault-plugin-database-snowflake/issues/13
for example).
This behavior seems to have been copy-pasted for many years but not for
any particular reason that we have been able to find. First use was in
https://github.com/hashicorp/vault/pull/15
So here we switch to new methods suffixed with `Direct` to indicate
that they don't `Prepare` before running `Exec`, and switch everything
here to use those. We maintain the older methods with the existing
behavior (with `Prepare`) for backwards compatibility.
* Bootstrap Nomad ACL system if no token is given
Similar to the [Bootstrap the Consul ACL system if no token is given][boostrap-consul]
it would be very useful to bootstrap Nomads ACL system and manage it in
Vault.
[boostrap-consul]:https://github.com/hashicorp/vault/pull/10751
* Add changelog entry
* Remove debug log line
* Remove redundant else
* Rename Nomad acl bootstrap param
* Replace sleep with attempt to list nomad leader, setup will retry until successful
* fmt
- As part of the PKI rotation project we need to hook into some of the functions
that were factored out for managed keys in regards to key handling within the
CA bundles.
- Refactor the codebase so that we only extract managed key stuff from oss/ent
and not additional business logic.
VAULT-5827 Update mongodb, brotli
Closes https://github.com/hashicorp/vault-plugin-secrets-mongodbatlas/issues/11
* `brotli` 1.0.1 was withdrawn
* `go-client-mongodb-atlas` has an old dependency on a renamed repo, and
has been renamed twice. This caused issues in
https://github.com/hashicorp/vault-plugin-secrets-mongodbatlas/issues/11
for example.
* VAULT-5827 Set unwrap token during database tests
The unwrap token is necessary for the plugins to start correctly when
running when running acceptance tests locally, e.g.,
```
$ VAULT_MONGODBATLAS_PROJECT_ID=... VAULT_MONGODBATLAS_PRIVATE_KEY=... VAULT_MONGODBATLAS_PUBLIC_KEY=... TEST='-run TestBackend_StaticRole_Rotations_MongoDBAtlas github.com/hashicorp/vault/builtin/logical/database' make test
--- FAIL: TestBackend_StaticRole_Rotations_MongoDBAtlas (5.33s)
rotation_test.go:818: err:%!s(<nil>) resp:&logical.Response{Secret:<nil>, Auth:<nil>, Data:map[string]interface {}{"error":"error creating database object: invalid database version: 2 errors occurred:\n\t* Unrecognized remote plugin message: PASS\n\nThis usually means that the plugin is either invalid or simply\nneeds to be recompiled to support the latest protocol.\n\t* Incompatible API version with plugin. Plugin version: 5, Client versions: [3 4]\n\n"}, Redirect:"", Warnings:[]string(nil), WrapInfo:(*wrapping.ResponseWrapInfo)(nil), Headers:map[string][]string(nil)}
```
Note the `PASS` message there, which indicates that the plugin exited
before starting the RPC server.
* Warnings indicating ignored and replaced parameters
* Avoid additional var creation
* Add warnings only if the response is non-nil
* Return the response even when error is non-nil
* Fix tests
* Rearrange comments
* Print warning in the log
* Fix another test
* Add CL
When adding SignatureBits control logic, we incorrectly allowed
specification of SignatureBits in the case of an ECDSA issuer. As noted
in the original request, NIST and Mozilla (and others) are fairly
prescriptive in the choice of signatures (matching the size of the
NIST P-curve), and we shouldn't usually use a smaller (or worse, larger
and truncate!) hash.
Ignore the configuration of signature bits and always use autodetection
for ECDSA like ed25519.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PKI test for delete role
- Create a role, validate that defaults are what we expect
and delete the role, verifying it is gone on subsequent read
attempts.
* Add PKI test for crl/rotate command
- Missing a unit test that validates the crl/rotate command works. The test validates the rotate command was successful
by checking if we have a different/new update time on the CRL.
* Rework PKI TestBackend_PathFetchValidRaw test to not write directly to storage
- Rework the existing test to not write directly to storage as we might change that in the future.
- Add tests that validate the ca_chain behaviour of not returning the root authority cert
* PR Feedback
* Additional PR feedback
* Correctly handle minimums, default SignatureBits
When using KeyType = "any" on a role (whether explicitly or implicitly
via a sign-verbatim like operation), we need to update the value of
SignatureBits from its new value 0 to a per-key-type default value. This
will allow sign operations on these paths to function correctly, having
the correctly inferred default signature bit length.
Additionally, this allows the computed default value for key type to be
used for minimum size validation in the RSA/ECDSA paths. We additionally
enforce the 2048-minimum in this case as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix defaults and validation of "any" KeyType
When certutil is given the placeholder any keytype, it attempts to
validate and update the default zero value. However, in lacking a
default value for SignatureBits, it cannot update the value from the
zero value, thus causing validation to fail.
Add more awareness to the placeholder "any" value to certutil.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add role-based regression tests for key bits
This adds regression tests for Key Type, Key Bits, and Signature Bits
parameters on the role. We test several values, including the "any"
value to ensure it correctly restricts key sizes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add sign-verbatim test for key type
This ensures that we test sign-verbatim against a variety of key types.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Fix semgrep 0.86.5 parsing failures
- semgrep https://github.com/returntocorp/semgrep/pull/4671 seems to have
introduce this parsing failure within version 0.86.0 and higher
- Workaround parsing failure by breaking out the if error check.
* Pin semgrep version to 0.86.5
* Fix formatting issues
The URL password redaction operation did not handle the case where the
database connection URL was provided as a percent-encoded string, and
its password component contained reserved characters. It attempted to
redact the password by replacing the unescaped password in the
percent-encoded URL. This resulted in the password being revealed when
reading the configuration from Vault.
* Misc PKI code fixes.
- Harden the code base a bit adding default's to switch statements
to various error handlers and processing statements.
- Fixup some error messages to include proper values we support.
* Additional default case missing within PKI
* Fix typo in PKI error message
* Add error check when looking up public key info for a managed key within PKI
* Trap use case that an unknown public key is returned to PKI through managed keys
Instead of using the field FieldData.Raw, use method GetOkError() which does
type conversion but still allows to check whether a value for the parameter was
provided. Note that GetOkError() converts nil values to default or zero values,
so, for example, a nil plaintext value will result in the empty string being
encrypted.
* Update description of certificate fetch API
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify /config/crl and /config/url PKI are empty
GET-ing these URLs will return 404 until such time as a config is posted
to them, even though (in the case of CRL), default values will be used.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify usage of /pki/crl/rotate
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update documentation around PKI key_bits
This unifies the description of key_bits to match the API description
(which is consistent across all usages).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix indented field descriptions in PKI paths
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify documentation around serial_number
Note that this field has no impact on the actual Serial Number field and
only an attribute in the requested certificate's Subject.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix spelling of localdomain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
As reported by Steve Clark, building an intermediate mount in PKI (and
calling /intermediate/set-signed) results in a duplicate intermediate CA
certificate in the full chain output (ca_chain field of the
/cert/ca_chain API endpoint response).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when generate_lease=no_store=true
When no_store=true, the value of generate_lease is ignored completely
(and set to false). This means that when generate_lease=true is
specified by the caller of the API, it is silently swallowed. While
changing the behavior could break callers, setting a warning on the
response (changing from a 204->200 in the process) seems to make the
most sense.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
As pointed out internally, a lot of the API docs and FrameworkField
descriptions of parameters were out of date. This syncs a number of
them, updating their descriptions where relevant.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new AllowWildcardCertificate field to PKI role
This field allows the PKI role to control whether or not issuance of
wildcard certificates are allowed. We default (both on migration and
new role creation) to the less secure true value for backwards
compatibility with existing Vault versions.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sanitizedName to reducedName
Per comment, this variable name was confusing during the reproduction
and subsequent fix of the earlier vulnerability and associated bug
report. Because the common name isn't necessarily _sanitized_ in any way
(and indeed must be considered in relation to other parts or the whole),
but portions of the entire name are removed, reducedName appears to make
the most sense.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Enforce AllowWildcardCertificates during issuance
This commit adds the bulk of correctly validating wildcard certificate
Common Names during issuance according to RFC 6125 Section 6.4.3
semantics. As part of this, support for RFC 2818-conforming wildcard
certificates (wherein there are almost no restrictions on issuance) has
been removed.
Note that this flag does take precedence over AllowAnyName, giving a
little more safety in wildcard issuance in this case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update test cases to conform with RFC 6125
Test cases 19, 70+71, and 83+84 didn't conform with the RFC 6125, and so
should've been rejected under strict conformance. For 70+71 and 83+84,
we previously conditioned around the value of AllowSubdomains (allowing
issuance when true), but they likely should've been rejected either way.
Additionally, update the notes about globs matching wildcard
certificates to notate this is indeed the case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Check AllowWildcardCertifciates in issuance tests
This allows for regression tests to cover the new
AllowWildcardCertificate conditional. We add additional test cases
ensuring that wildcard issuance is properly forbidden in all relevant
scenarios, while allowing the existing test cases to validate that
wildcard status doesn't affect non-wildcard certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add Wildcard allowance during signing operations
When using sign-verbatim, sign-intermediate, or getting certificate
generation parameters, set AllowWildcardCertificates to mirror existing
policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow issuance of wildcard via glob match
From Vault v1.8.0 onwards, we would incorrectly disallow issuance of a
wildcard certificate when allow_glob_domain was enabled with a
multi-part glob domain in allowed_domains (such as *.*.foo) when
attempting to issue a wildcard for a subdomain (such as *.bar.foo).
This fixes that by reverting an errant change in the case insensitivity
patch. Here, when validating against a very powerful glob construct, we
leave the wildcard prefix (*.) from the raw common_name element, to
allow multi-part globs to match wildcard entries.
It is important to note that "sanitizedName" is an incorrect variable
naming here. Wildcard parsing (per RFC 6125 which supercedes RFC 2818)
must be in the left-most segment of the domain, but we lack validation
to ensure no internal wildcards exist. Additionally per item 3 of
section 6.4.3 of RFC 6125, wildcards MAY be internal to a domain
segment, in which case sanitizedName again leaves the wildcard in place.
Resolves: #13530
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove duplicate email address check
As pointed out by Steven Clark (author of the removed conditional in
70012cd865b3dcdab376dba0c0e0abc88c48f508), this is duplicate from the
now-reintroduced comparison against name (versus the erroneous
sanitizedName at the time of his commit).
This is a reversion of the changes to builtin/logical/pki/cert_util.go,
but keeping the additional valuable test cases.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add multi-dimensional PKI role issuance tests
This commit introduces multi-dimensional testing of PKI secrets engine's
role-based certificate issuance with the intent of preventing future
regressions.
Here, dimensions of testing include:
- AllowedDomains to decide which domains are approved for issuance,
- AllowBareDomains to decide if raw entries of AllowedDomains are
permitted,
- AllowGlobDomains to decide if glob patterns in AllowedDomains are
parsed,
- AllowSubdomains to decide if subdomains of AllowedDomains are
permitted,
- AllowLocalhost to decide if localhost identifiers are permitted, and
- CommonName of the certificate to request.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add checks for other error types within the PKI plugin
- The PKI plugin assumes the code it is calling always returns an error
of type errutil.UserError or errutil.InternalError. While I believe
so far this is still true, it would be easy to add a code path that
just returns a generic error and we would completely ignore it.
- This was found within some managed key testing where I forgot to wrap
an error within one of the expected types
* Add changelog
* Allow OpenSSH-style key type identifiers
To bring better parity with the changes of #14008, wherein we allowed
OpenSSH-style key identifiers during generation. When specifying a list
of allowed keys, validate against both OpenSSH-style key identifiers
and the usual simplified names as well ("rsa" or "ecdsa"). Notably, the
PKI secrets engine prefers "ec" over "ecdsa", so we permit both as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix missing quote in docs
* Explicitly call out SSH algorithm_signer default
Related: #11608
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use rsa-sha2-256 as the default SSH CA hash algo
As mentioned in the OpenSSH 8.2 release notes, OpenSSH will no longer be
accepting ssh-rsa signatures by default as these use the insecure SHA-1
algorithm.
For roles in which an explicit signature type wasn't specified, we
should change the default from SHA-1 to SHA-256 for security and
compatibility with modern OpenSSH releases.
See also: https://www.openssh.com/txt/release-8.2
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update docs mentioning new algorithm change
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix missing parenthesis, clarify new default value
* Add to side bar
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* plugin/catalog: support plugin registration whe type is explicitly provided
* don't use database type on plugin backend test; mock doesn't satisfy the DB interface
* check multiplexing support from plugin directly on newPluginClient
* do not return mutiplexed bool on catalog helper funcs
* Allow specifying multiple allowed SSH key lengths
In the ssh secrets engine, only a single allowed key length was allowed
for each algorithm type. However, many algorithms have multiple safe
values (such as RSA and ECDSA); allowing a single role to have multiple
values for a single algorithm is thus helpful.
On creation or update, roles can now specify multiple types using a list
or comma separated string of allowed values:
allowed_user_key_lengths: map[string][]int{"rsa": []int{2048, 4096}}
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Break out ssh upgrade logic into separate function
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update parseutil for optional lists of integers
go get -u github.com/hashicorp/go-secure-stdlib/parseutil
go mod tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Simplify parse logic using new parseutil
The newly introduced parseutil.ParseIntSlice handles the more
complicated optional int-like slice logic for us.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* adds development workflow to mirage config
* adds mirage handler and factory for mfa workflow
* adds mfa handling to auth service and cluster adapter
* moves auth success logic from form to controller
* adds mfa form component
* shows delayed auth message for all methods
* adds new code delay to mfa form
* adds error views
* fixes merge conflict
* adds integration tests for mfa-form component
* fixes auth tests
* updates mfa response handling to align with backend
* updates mfa-form to handle multiple methods and constraints
* adds noDefault arg to Select component
* updates mirage mfa handler to align with backend and adds generator for various mfa scenarios
* adds tests
* flaky test fix attempt
* reverts test fix attempt
* adds changelog entry
* updates comments for todo items
* removes faker from mfa mirage factory and handler
* adds number to word helper
* fixes tests
* Revert "Merge branch 'main' into ui/mfa"
This reverts commit 8ee6a6aaa1b6c9ec16b985c10d91c3806819ec40, reversing
changes made to 2428dd6cca07bb41cda3f453619646ca3a88bfd0.
* format-ttl helper fix from main
* feat: DB plugin multiplexing (#13734)
* WIP: start from main and get a plugin runner from core
* move MultiplexedClient map to plugin catalog
- call sys.NewPluginClient from PluginFactory
- updates to getPluginClient
- thread through isMetadataMode
* use go-plugin ClientProtocol interface
- call sys.NewPluginClient from dbplugin.NewPluginClient
* move PluginSets to dbplugin package
- export dbplugin HandshakeConfig
- small refactor of PluginCatalog.getPluginClient
* add removeMultiplexedClient; clean up on Close()
- call client.Kill from plugin catalog
- set rpcClient when muxed client exists
* add ID to dbplugin.DatabasePluginClient struct
* only create one plugin process per plugin type
* update NewPluginClient to return connection ID to sdk
- wrap grpc.ClientConn so we can inject the ID into context
- get ID from context on grpc server
* add v6 multiplexing protocol version
* WIP: backwards compat for db plugins
* Ensure locking on plugin catalog access
- Create public GetPluginClient method for plugin catalog
- rename postgres db plugin
* use the New constructor for db plugins
* grpc server: use write lock for Close and rlock for CRUD
* cleanup MultiplexedClients on Close
* remove TODO
* fix multiplexing regression with grpc server connection
* cleanup grpc server instances on close
* embed ClientProtocol in Multiplexer interface
* use PluginClientConfig arg to make NewPluginClient plugin type agnostic
* create a new plugin process for non-muxed plugins
* feat: plugin multiplexing: handle plugin client cleanup (#13896)
* use closure for plugin client cleanup
* log and return errors; add comments
* move rpcClient wrapping to core for ID injection
* refactor core plugin client and sdk
* remove unused ID method
* refactor and only wrap clientConn on multiplexed plugins
* rename structs and do not export types
* Slight refactor of system view interface
* Revert "Slight refactor of system view interface"
This reverts commit 73d420e5cd2f0415e000c5a9284ea72a58016dd6.
* Revert "Revert "Slight refactor of system view interface""
This reverts commit f75527008a1db06d04a23e04c3059674be8adb5f.
* only provide pluginRunner arg to the internal newPluginClient method
* embed ClientProtocol in pluginClient and name logger
* Add back MLock support
* remove enableMlock arg from setupPluginCatalog
* rename plugin util interface to PluginClient
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
* feature: multiplexing: fix unit tests (#14007)
* fix grpc_server tests and add coverage
* update run_config tests
* add happy path test case for grpc_server ID from context
* update test helpers
* feat: multiplexing: handle v5 plugin compiled with new sdk
* add mux supported flag and increase test coverage
* set multiplexingSupport field in plugin server
* remove multiplexingSupport field in sdk
* revert postgres to non-multiplexed
* add comments on grpc server fields
* use pointer receiver on grpc server methods
* add changelog
* use pointer for grpcserver instance
* Use a gRPC server to determine if a plugin should be multiplexed
* Apply suggestions from code review
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* add lock to removePluginClient
* add multiplexingSupport field to externalPlugin struct
* do not send nil to grpc MultiplexingSupport
* check err before logging
* handle locking scenario for cleanupFunc
* allow ServeConfigMultiplex to dispense v5 plugin
* reposition structs, add err check and comments
* add comment on locking for cleanupExternalPlugin
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Ensure we can issue against generated SSH CA keys
This adds a test to ensure that we can issue leaf SSH certificates using
the newly generated SSH CA keys. Presently this fails because the
ed25519 key private is stored using PKIX's PKCS8 PrivateKey object
format rather than using OpenSSH's desired private key format:
> path_config_ca_test.go:211: bad case 12: err: failed to parse stored CA private key: ssh: invalid openssh private key format, resp: <nil>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add dependency on edkey for OpenSSH ed25519 keys
As mentioned in various terraform-provider-tls discussions, OpenSSH
doesn't understand the standard OpenSSL/PKIX ed25519 key structure (as
generated by PKCS8 marshalling). Instead, we need to place it into the
OpenSSH RFC 8709 format. As mentioned in this dependency's README,
support in golang.org/x/crypto/ssh is presently lacking for this.
When the associated CL is merged, we should be able to remove this dep
and rely on the (extended) standard library, however, no review progress
appears to have been made since the CL was opened by the author.
See also: https://go-review.googlesource.com/c/crypto/+/218620/
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add generation support for other SSH CA key types
This adds two new arguments to config/ca, mirroring the values of PKI
secrets engine but tailored towards SSH mounts. Key types are specified
as x/crypto/ssh KeyAlgo identifiers (e.g., ssh-rsa or ssh-ed25519)
and respect current defaults (ssh-rsa/4096). Key bits defaults to 0,
which for ssh-rsa then takes a value of 4096.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on key_type, key_bits for ssh/config/ca
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow all other_sans in sign-intermediate and sign-verbatim
/sign-verbatim and /sign-intermediate are more dangerous endpoints in
that they (usually) do not have an associated role. In this case, a
permissive role is constructed during execution of these tests. However,
the AllowedOtherSANs field was missing from this, prohibiting its use
when issuing certificates.
Resolves: #13157
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add duration/count metrics to PKI issue and revoke flows
* docs, changelog
* tidy
* last tidy
* remove err
* Update callsites
* Simple returns
* Handle the fact that test cases don't have namespaces
* Add mount point to the request
* fmt
* Handle empty mount point, and add it to unit tests
* improvement
* Turns out sign-verbatim is tricky, it can take a role but doesn't have to
* Get around the field schema problem
* Use application/pem-certificate-chain for PEMs
As mentioned in #10948, it appears we're incorrectly using the
`application/pkix-cert` media type for PEM blobs, when
`application/x-pem-file` is more appropriate. Per RFC 5280 Section
4.2.1.13, `application/pkix-crl` is only appropriate when the CRL is in
DER form. Likewise, Section 4.2.2.1 states that `application/pkix-cert`
is only applicable when a single DER certificate is used.
Per recommendation in RFC 8555 ("ACME"), Section 7.4.2 and 9.1, we use
the newer `application/pem-certificate-chain` media type for
certificates. However, this is not applicable for CRLs, so we use fall
back to `application/x-pem-file` for these. Notably, no official IETF
source is present for the latter. On the OpenSSL PKI tutorial
(https://pki-tutorial.readthedocs.io/en/latest/mime.html), this type is
cited as coming from S/MIME's predecessor, PEM, but neither of the main
PEM RFCs (RFC 934, 1421, 1422, 1423, or 1424) mention this type.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Include full chain in /cert/ca_chain response
This allows callers to get the full chain (including issuing
certificates) from a call to /cert/ca_chain. Previously, most endpoints
(including during issuance) do not include the root authority, requiring
an explicit call to /cert/ca to fetch. This allows full chains to be
constructed without without needing multiple calls to the API.
Resolves: #13489
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case for full CA issuance
We test three main scenarios:
1. A root-only CA's `/cert/ca_chain`'s `.data.ca_chain` field should
contain only the root,
2. An intermediate CA (with root provide) should contain both the root
and the intermediate.
3. An external (e.g., `/config/ca`-provided) CA with both root and
intermediate should contain both certs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation for new ca_chain field
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about where to find the entire chain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support Y10K value in notAfter field when signing non-CA certificates
* Add changelog entry for 13736
* Add test for using not_after parameter for non-CA certificates that are being signed
* Fix CA value for test for not_after value when signing non-CA certs
* Address formatting
* Add changelog file
* Revert changelog entry commit f28b54e7b5ad21144c8a2da942d766e64a332caf
* Fix a transit deadlock caused by indefinite lock holding in key autorotation.
* Move down manual policy locking in transit autorotation to avoid NPE.
* Wrap conditional transit key autorotation in a function to allow for cleaner policy lock management.
* Remove a dnagling continue statement from transit key autorotation.
* Fix upndomain bug causing alias name to change
* Fix nil map
* Add changelog
* revert
* Update changelog
* Add test for alias metadata name
* Fix code comment
* Add auto_rotate_interval field to transit key creation path.
* Add auto_rotate_interval field to transit key config update path.
* Implement transit automatic key rotation on an hourly interval.
* Fixes transit key autorotation key listing typo.
* Add unit tests for transit key autorotation.
* Add unit tests for transit key creation with autorotation interval.
* Add unit tests for transit key config update with autorotation interval.
* Document new auto_rotate_interval fields in key creation and key config update endpoints.
* Add changelog for transit key autorotation.
* Wrap individual transit key autorotation in a policy lock.
* Add a safeguard to transit key autorotation to ensure only one execution happens simultaneously.
* auth/cert: Add certificate extensions as metadata
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* Add changelog for #13348
Signed-off-by: Peter Verraedt <peter.verraedt@kuleuven.be>
* CLI changes for new mount tune config parameter allowed_managed_keys
* Correct allowed_managed_keys description in auth and secrets
* Documentation update for secrets and removed changes for auth
* Add changelog and remove documentation changes for auth
* removed changelog
* Correct the field description
* Replace - with : when listing certificate serials
* Add allowed_uri_sans_template
Enables identity templating for the allowed_uri_sans field in PKI cert roles.
Implemented as suggested in #8509
* changelog++
* Update docs with URI SAN templating
* github auth: use org id to verify creds
* add check for required org param; add test case
* update UTs
* add nil check for org
* add changelog
* fix typo in ut
* set org ID if it is unset; add more ut coverage
* add optional organization_id
* move client instantiation
* refactor parse URL; add UT for setting org ID
* fix comment in UT
* add nil check
* don't update org name on change; return warning
* refactor verifyCredentials
* error when unable to fetch org ID on config write; add warnings
* fix bug in log message
* update UT and small refactor
* update comments and log msg
* use getter for org ID
* Allow universal default for key_bits
This allows the key_bits field to take a universal default value, 0,
which, depending on key_type, gets adjusted appropriately into a
specific default value (rsa->2048, ec->256, ignored under ed25519).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle universal default key size in certutil
Also move RSA < 2048 error message into certutil directly, instead of in
ca_util/path_roles.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing RSA key sizes to pki/backend_test.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to returning updated values
When determining the default, don't pass in pointer types, but instead
return the newly updated value.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Re-add fix for ed25519 from #13254
Ed25519 internally specifies a hash length; by changing the default from
256 to 0, we fail validation in ValidateSignatureLength(...) unless we
specify the key algorithm.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- The test was attempting to test the convergent encryption behaviour
with several key types but the common function never used the passed
in key type. So we ran the test with the default aes256-gcm96 only.
* Warn user supplying nonce values in FIPS mode for transit encryption requests
- Send back a warning within the response if an end-user supplies nonce
values that we use within the various transit encrypt apis.
- We do not send a warning if an end-user supplies a nonce value but we
don't use it.
- Affected api methods are encrypt, rewrap and datakey
- The warning is only sent when we are operating in FIPS mode.
* Adding support for SHA3 in the transit backend.
* Adds SHA-3 tests for transit sign/verify path. Adds SHA-3 tests for logical system tools path hash functionality. Updates documentation to include SHA-3 algorithms in system tools path hashing.
* Adds changelog entry.
Co-authored-by: robison jacka <robison@packetized.io>
Update the AWS auth backend acceptance tests to account for the new
`iam_tags` field that comes back on responses.
* marked only tests requiring creds as acceptance
Renamed TestBackend_* to TestAcceptanceBackend_* if the test requires
AWS credentials. Otherwise left the name as TestBackend_* and set
`AcceptanceTest: false`.
* ensure generated names aren't too long
IAM roles and users have a 64 character limit, and adding Acceptance
to the test names was putting some over the length limit, so modified
generateUniqueName() to take a max length parameter and added
functions for each type of name generation (user, role, group).
* return pkcs8 format for ed25519 curve
convertRespToPKCS8 does not recognize the ed25519 key. Changes
to recognize ed25519 key and return its PKCS8 format
* Restrict ECDSA signatures with NIST P-Curve hashes
When using an ECDSA signature with a NIST P-Curve, we should follow
recommendations from BIS (Section 4.2) and Mozilla's root store policy
(section 5.1.2) to ensure that arbitrary selection of signature_bits
does not exceed what the curve is capable of signing.
Related: #11245
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to certutil.ValidateKeyTypeSignatureLength(...)
Replaces previous calls to certutil.ValidateKeyTypeLength(...) and
certutil.ValidateSignatureLength(...) with a single call, allowing for
curve<->hash validation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to autodetection of signature_bits
This enables detection of whether the caller manually specified a value
for signature_bits or not; when not manually specified, we can provision
a value that complies with new NIST P-Curve policy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Select hash function length automatically
Due to our change in behavior (to default to -1 as the value to
signature_bits to allow for automatic hash selection), switch
ValidateKeyTypeSignatureLength(...) to accept a pointer to hashBits and
provision it with valid default values.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent invalid Curve size lookups
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch from -1 to 0 as default SignatureBits
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
VAULT-444: Add PKI tidy-status endpoint.
Add metrics so that the PKI tidy status can be monitored using telemetry as well.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Document allow_different_signature_algorithm param
* Flip the semantics of different key types for sign self issued
* More language tweaks
* Fix the field definition description
* Rework differenttype test for the new flag
* typo
* Native Login method, userpass and approle interfaces to implement it
* Add AWS auth interface for Login, unexported struct fields for now
* Add Kubernetes client login
* Add changelog
* Add a test for approle client login
* Return errors from LoginOptions, use limited reader for secret ID
* Fix auth comment length
* Return actual type not interface, check for client token in tests
* Require specification of secret ID location using SecretID struct as AppRole arg
* Allow password from env, file, or plaintext
* Add flexibility in how to fetch k8s service token, but still with default
* Avoid passing strings that need to be validated by just having different login options
* Try a couple real tests with approle and userpass login
* Fix method name in comment
* Add context to Login methods, remove comments about certain sources being inherently insecure
* Perform read of secret ID at login time
* Read password from file at login time
* Pass context in integ tests
* Read env var values in at login time, add extra tests
* Update api version
* Revert "Update api version"
This reverts commit 1ef3949497dcf878c47e0e5ffcbc8cac1c3c1679.
* Update api version in all go.mod files
* Modernize SSH key lengths
No default change was made in this commit; note that the code already
enforced a default of 2048 bits. ssh-keygen and Go's RSA key generation
allows for key sizes including 3072, 4096, 8192; update the values of
SSH key generation to match PKI's allowed RSA key sizes (from
certutil.ValidateKeyTypeLength(...)). We still allow the legacy SSH key
size of 1024; in the near future we should likely remove it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure minimum of 2048-bit PKI RSA keys
While the stated path is a false-positive, verifying all paths is
non-trivial. We largely validate API call lengths using
certutil.ValidateKeyTypeLength(...), but ensuring no other path calls
certutil.generatePrivateKey(...) --- directly or indirectly --- is
non-trivial. Thus enforcing a minimum in this method sounds like a sane
compromise.
Resolves: https://github.com/hashicorp/vault/security/code-scanning/55
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Let allowed_users template mix templated and non-templated parts (#10388)
* Add documentation
* Change test function names
* Add documentation
* Add changelog entry
* Forbid ssh key signing with specified extensions when role allowed_extensions is not set
- This is a behaviour change on how we process the allowed_extensions role
parameter when it does not contain a value. The previous handling allowed
a client to override and specify any extension they requested.
- We now require a role to explicitly set this behaviour by setting the parameter
to a '*' value which matches the behaviour of other keys such as allowed_users
within the role.
- No migration of existing roles is provided either, so operators if they truly
want this behaviour will need to update existing roles appropriately.
* update azure instructions
Update instructions in regards to azure AD Authentication and OIDC
* Initial pass of ed25519
* Fix typos on marshal function
* test wip
* typo
* fix tests
* missef changelog
* fix mismatch between signature and algo
* added test coverage for ed25519
* remove pkcs1 since does not exist for ed25519
* add ed25519 support to getsigner
* pull request feedback
Signed-off-by: Anner J. Bonilla <abonilla@hoyosintegrity.com>
* typo on key
Signed-off-by: Anner J. Bonilla <abonilla@hoyosintegrity.com>
* cast mistake
Signed-off-by: Anner J. Bonilla <abonilla@hoyosintegrity.com>
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
* core: set namespace from the sysview's mount entry on GeneratePasswordFromPolicy
* test: update TestDynamicSystemView to be ns-aware, update tests
* add changelog entry
* port of ldap fix for early cred rotation
* some more porting
* another couple lines to port
* final commits before report
* remove deadlock
* needs testing
* updates
* Sync with OpenLDAP PR
* Update the update error handling for items not found in the queue
* WIP unit tests
* Need to configure DB mount correctly, with db type mockv5
* Need to find a way to inject errors into that mock db
* throw error on role creation failure
* do not swallow error on role creation
* comment out wip tests and add in a test for disallowed role
* Use newly generated password in WAL
Co-authored-by: Michael Golowka <72365+pcman312@users.noreply.github.com>
* return err on popFromRotationQueueByKey error; cleanup on setStaticAccount
* test: fix TestPlugin_lifecycle
* Uncomment and fix unit tests
* Use mock database plugin to inject errors
* Tidy test code to rely less on code internals where possible
* Some stronger test assertions
* Undo logging updates
* Add changelog
* Remove ticker and background threads from WAL tests
* Keep pre-existing API behaviour of allowing update static role to act as a create
* Switch test back to update operation
* Revert my revert, and fix some test bugs
* Fix TestBackend_StaticRole_LockRegression
* clean up defer on TestPlugin_lifecycle
* unwrap reqs on cleanup
* setStaticAccount: don't hold a write lock
* TestStoredWALsCorrectlyProcessed: set replication state to unknown
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Michael Golowka <72365+pcman312@users.noreply.github.com>
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* WIP: Unset the certificate's SignatureAlgorithm to allown cross-signing of different key types
* Allow signing self issued certs with a different public key algorithm
* Remove cruft
* Remove stale import
* changelog
* eliminate errwrap
* Add a test to cover the lack of opt-in flag
* Better comment
Co-authored-by: catsby <clint@ctshryock.com>
* Enforce Minimum cache size for transit backend
* enfore minimum cache size and log a warning during backend construction
* Update documentation for transit backend cache configuration
* Added changelog
* Addressed review feedback and added unit test
* Modify code in pathCacheConfigWrite to make use of the updated cache size
* Updated code to refresh cache size on transit backend without restart
* Update code to acquire read and write locks appropriately
This change adds the ability to set the signature algorithm of the
CAs that Vault generates and any certificates it signs. This is a
potentially useful stepping stone for a SHA3 transition down the line.
Summary:
* Adds the field "signature_bits" to CA and Sign endpoints
* Adds support for SHA256, SHA384 and SHA512 signatures on EC and RSA
keytypes.
* Fix pkcs7 parsing in some cases
brings in https://github.com/mozilla-services/pkcs7/pull/61 from upstream
In some cases but not all, aws includes a certificate in the pkcs7 response,
and currently vault fails to parse those certificates:
```
URL: PUT https://vault.example.com/v1/auth/aws/login
Code: 500. Errors
* failed to parse the BER encoded PKCS#7 signature: ber2der: Invalid BER format
```
This fixes logins on those instances. Note we could not readily ascertain why
some instances have those certificates and others don't.
* Add changelog entry
* Correct missed line
* Send x-forwarded-for in Okta Push Factor request
Why:
In order for Okta to properly report the location of the authentication
attempt, the X-Forwarded-For header must be included in the request to
Okta (if it exists).
This change addresses the need by:
* Duplicating the value of X-Forwarded-For if it's passed through to the
auth backend
* Add changelog entry for 12320
* update genUsername to cap STS usernames at 64 chars
* add changelog
* refactor tests into t.Run block
* patch: remove warningExpected bool and include expected string
* patch: revert sts to cap at 32 chars and add assume_role case in genUsername
* update changelog
* update genUsername to return error if username generated exceeds length limits
* update changelog
* add conditional default username template to provide custom STS usernames
* update changelog
* include test for failing STS length case
* update comments for more clarity
* Work around rabbitmq regression with UserInfo.Tags in rabbitmq 3.9: use v3.8 docker image in tests.
* Also pin cassandra docker image version to 3.11 (4.00 was making tests fail)
Unlike the other libraries that were migrated, there are no usages of
this lib in any of our plugins, and the only other known usage was in
go-kms-wrapping, which has been updated. Aliasing it like the other libs
would still keep the aws-sdk-go dep in the sdk module because of the
function signatures. So I've simply removed it entirely here.
* add ability to customize IAM usernames based on templates
* add changelog
* remove unnecessary logs
* patch: add test for readConfig
* patch: add default STS Template
* patch: remove unnecessary if cases
* patch: add regex checks in username test
* patch: update genUsername to return an error instead of warnings
* patch: separate tests for default and custom templates
* patch: return truncate warning from genUsername and trigger a 400 response on errors
* patch: truncate midString to 42 chars in default template
* docs: add new username_template field to aws docs
* fix: cap token TTL at login time based on default lease TTL
* add changelog file
* patch: update warning messages to not include 'at login'
* patch: remove default lease capping and test
* update changelog
* patch: revert warning message
* initializing resp variable with aa *logical.Response before using it to add warning for default-service or default-batch token type. Also adding guard around code that sets resp to a new logical.Response further on in the function.
* adding changelog entry
* renaming changelog file to match PR number
* add username customization for rabbitmq
* add changelog for rabbitmq
* Update builtin/logical/rabbitmq/path_config_connection.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* updating API docs
* moved to changelog folder
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* approle: convert Callbacks to Operations
The usage of oldstyle "Callbacks" is causing the `cannot write to readonly
storage` error message when `login` is attempted against a performance standby.
Use the newstyle "Operations" and additionally set the Forward
parameters to forward the request to the Active vault node.
* add changelog
* do not forward for alias lookahead operation
* remove forward fields and remove changelog
- Because this request is an UpdateOperation, it should have automatically been
routed to the primary/active by the router before it reaches the backend.
- changelog should not be needed as this change is only a refactor with
no user-facing behavior changes.
