The slice returned by `collectGroupsReverseDFS` is an updated copy of
the slice given to it when called. Appending `pGroups` to `groups`
therefore led to expontential memory usage as the slice was repeatedly
appended to itself.
Fixes#5605
* case insensitive identity names
* TestIdentityStore_GroupHierarchyCases
* address review feedback
* Use errwrap.Contains instead of errwrap.ContainsType
* Warn about duplicate names all the time to help fix them
* Address review feedback
* Support Authorization Bearer as token header
* add requestAuth test
* remove spew debug output in test
* Add Authorization in CORS Allowed headers
* use const where applicable
* use less allocations in bearer token checking
* address PR comments on tests and apply last commit
* reorder error checking in a TestHandler_requestAuth
* logical/aws: Harden WAL entry creation
If AWS IAM user creation failed in any way, the WAL corresponding to the
IAM user would get left around and Vault would try to roll it back.
However, because the user never existed, the rollback failed. Thus, the
WAL would essentially get "stuck" and Vault would continually attempt to
roll it back, failing every time. A similar situation could arise if the
IAM user that Vault created got deleted out of band, or if Vault deleted
it but was unable to write the lease revocation back to storage (e.g., a
storage failure).
This attempts to harden it in two ways. One is by deleting the WAL log
entry if the IAM user creation fails. However, the WAL deletion could
still fail, and this wouldn't help where the user is deleted out of
band, so second, consider the user rolled back if the user just doesn't
exist, under certain circumstances.
Fixes#5190
* Fix segfault in expiration unit tests
TestExpiration_Tidy was passing in a leaseEntry that had a nil Secret,
which then caused a segfault as the changes to revokeEntry didn't check
whether Secret was nil; this is probably unlikely to occur in real life,
but good to be extra cautious.
* Fix potential segfault
Missed the else...
* Respond to PR feedback
* Fix for using ExplicitMaxTTL in auth method plugins.
* Reverted pb.go files for readability of PR.
* Fixed indenting of comment.
* Reverted unintended change by go test.
This works around a very, very common error where people write policies
to affect listing but forget the slash at the end. If there is no exact
rule with a slash at the end when doing a list, we look to see if there
is a rule without it, and if so, use those capabilities.
Fixes #mass-user-confusion
* Initial work on templating
* Add check for unbalanced closing in front
* Add missing templated assignment
* Add first cut of end-to-end test on templating.
* Make template errors be 403s and finish up testing
* Review feedback
* Merge Identity Entities if two claim the same alias
Past bugs/race conditions meant two entities could be created each
claiming the same alias. There are planned longer term fixes for this
(outside of the race condition being fixed in 0.10.4) that involve
changing the data model, but this is an immediate workaround that has
the same net effect: if two entities claim the same alias, assume they
were created due to this race condition and merge them.
In this situation, also automatically merge policies so we don't lose
e.g. RGPs.
* plumbing request context to expiration manager
* moar context
* address feedback
* only using active context for revoke prefix
* using active context for revoke commands
* cancel tidy on active context
* address feedback
* core: Cancel context before taking state lock
* Create active context outside of postUnseal
* Attempt to drain requests before canceling context
* fix test
* Add request timeouts in normal request path and to expirations
* Add ability to adjust default max request duration
* Some test fixes
* Ensure tests have defaults set for max request duration
* Add context cancel checking to inmem/file
* Fix tests
* Fix tests
* Set default max request duration to basically infinity for this release for BC
* Address feedback
* Tackle #4929 a different way
This turns c.sealed into an atomic, which allows us to call sealInternal
without a lock. By doing so we can better control lock grabbing when a
condition causing the standby loop to get out of active happens. This
encapsulates that logic into two distinct pieces (although they could
be combined into one), and makes lock guarding more understandable.
* Re-add context canceling to the non-HA version of sealInternal
* Return explicitly after stopCh triggered
1) In backends, ensure they are now using TokenPolicies
2) Don't reassign auth.Policies until after expmgr registration as we
don't need them at that point
Fixes#4829
It's not obvious why this should be secret, and if it were considered
secret, when and what anything would ever be allowed to access it.
Likely the right way to tie secret values to particular
entities/aliases/groups would be to use the upcoming templated ACL
feature.
1) Disable MaxRetries in test cluster clients. We generally want to fail
as fast as possible in tests so adding unpredictable timing in doesn't
help things, especially if we're timing sensitive in the test.
2) EquivalentPolicies is supposed to return true if only one set
contains `default` and the other is empty, but if one set was nil
instead of simply a zero length slice it would always return false. This
means that renewing against, say, `userpass` when not actually
specifying any user policies would always fail.
* Add description flag to secrets and auth tune subcommands
* Allow empty description to be provided in secret and auth mount tune
* Use flagNameDescription
This change makes it so that if a lease is revoked through user action,
we set the expiration time to now and update pending, just as we do with
tokens. This allows the normal retry logic to apply in these cases as
well, instead of just erroring out immediately. The idea being that once
you tell Vault to revoke something it should keep doing its darndest to
actually make that happen.
* Allow max request size to be user-specified
This turned out to be way more impactful than I'd expected because I
felt like the right granularity was per-listener, since an org may want
to treat external clients differently from internal clients. It's pretty
straightforward though.
This also introduces actually using request contexts for values, which
so far we have not done (using our own logical.Request struct instead),
but this allows non-logical methods to still get this benefit.
* Switch to ioutil.ReadAll()
* Add an idle timeout for the server
Because tidy operations can be long-running, this also changes all tidy
operations to behave the same operationally (kick off the process, get a
warning back, log errors to server log) and makes them all run in a
goroutine.
This could mean a sort of hard stop if Vault gets sealed because the
function won't have the read lock. This should generally be okay
(running tidy again should pick back up where it left off), but future
work could use cleanup funcs to trigger the functions to stop.
* Fix up tidy test
* Add deadline to cluster connections and an idle timeout to the cluster server, plus add readheader/read timeout to api server
If we have a panic defer functions are run but unlocks aren't. Since we
can't really trust plugins and storage, this backs out the changes for
those parts of the request path.
* This changes the way policies are reported in audit logs.
Previously, only policies tied to tokens would be reported. This could
make it difficult to perform after-the-fact analysis based on both the
initial response entry and further requests. Now, the full set of
applicable policies from both the token and any derived policies from
Identity are reported.
To keep things consistent, token authentications now also return the
full set of policies in api.Secret.Auth responses, so this both makes it
easier for users to understand their actual full set, and it matches
what the audit logs now report.
* Remove a lot of deferred functions in the request path.
There is an interesting benchmark at https://www.reddit.com/r/golang/comments/3h21nk/simple_micro_benchmark_to_measure_the_overhead_of/
It shows that defer actually adds quite a lot of overhead -- maybe 100ns
per call but we defer a *lot* of functions in the request path. So this
removes some of the ones in request handling, ha, barrier, router, and
physical cache.
One meta-note: nearly every metrics function is in a defer which means
every metrics call we add could add a non-trivial amount of time, e.g.
for every 10 extra metrics statements we add 1ms to a request. I don't
know how to solve this right now without doing what I did in some of
these cases and putting that call into a simple function call that then
goes before each return.
* Simplify barrier defer cleanup
* Store lease times suitable for export in pending
This essentially caches lease information for token lookups, preventing
going to disk over and over.
* Simplify logic
Taking inspiration from
https://github.com/golang/go/issues/17604#issuecomment-256384471
suggests that taking the address of a stack variable for use in atomics
works (at least, the race detector doesn't complain) but is doing it
wrong.
The only other change is a change in Leader() detecting if HA is enabled
to fast-path out. This value never changes after NewCore, so we don't
need to grab the read lock to check it.
* Add entity information request to system view
* fixing a few comments
* sharing types between plugin and logical
* sharing types between plugin and logical
* fixing output directory for proto
* removing extra replacement
* adding mount type lookup
* empty entities return nil instead of error
* adding some comments
* Add key information to list endpoints in identity.
Also fixes some bugs from before where we were persisting data that we
should not have been (mount type/path).
* Add cached lookups of real time mount info
* Optimize revokeSalted by not calling view.List twice
* Minor comment update
* Do not go through the orphaning dance if we are revoking the entire tree
* Update comment
* Hand off lease expiration to expiration manager via timers
* Use sync.Map as the cache to track token deletion state
* Add CreateOrFetchRevocationLeaseByToken to hand off token revocation to exp manager
* Update revoke and revoke-self handlers
* Fix tests
* revokeSalted: Move token entry deletion into the deferred func
* Fix test race
* Add blocking lease revocation test
* Remove test log
* Add HandlerFunc on NoopBackend, adjust locks, and add test
* Add sleep to allow for revocations to settle
* Various updates
* Rename some functions and variables to be more clear
* Change step-down and seal to use expmgr for revoke functionality like
during request handling
* Attempt to WAL the token as being invalid as soon as possible so that
further usage will fail even if revocation does not fully complete
* Address feedback
* Return invalid lease on negative TTL
* Revert "Return invalid lease on negative TTL"
This reverts commit a39597ecdc23cf7fc69fe003eef9f10d533551d8.
* Extend sleep on tests
This takes place in two parts, since working on this exposed an issue
with response wrapping when there is a raw body set. The changes are (in
diff order):
* A CurrentWrappingLookupFunc has been added to return the current
value. This is necessary for the lookahead call since we don't want the
lookahead call to be wrapped.
* Support for unwrapping < 0.6.2 tokens via the API/CLI has been
removed, because we now have backends returning 404s with data and can't
rely on the 404 trick. These can still be read manually via
cubbyhole/response.
* KV preflight version request now ensures that its calls is not
wrapped, and restores any given function after.
* When responding with a raw body, instead of always base64-decoding a
string value and erroring on failure, on failure we assume that it
simply wasn't a base64-encoded value and use it as is.
* A test that fails on master and works now that ensures that raw body
responses that are wrapped and then unwrapped return the expected
values.
* A flag for response data that indicates to the wrapping handling that
the data contained therein is already JSON decoded (more later).
* RespondWithStatusCode now defaults to a string so that the value is
HMAC'd during audit. The function always JSON encodes the body, so
before now it was always returning []byte which would skip HMACing. We
don't know what's in the data, so this is a "better safe than sorry"
issue. If different behavior is needed, backends can always manually
populate the data instead of relying on the helper function.
* We now check unwrapped data after unwrapping to see if there were raw
flags. If so, we try to detect whether the value can be unbase64'd. The
reason is that if it can it was probably originally a []byte and
shouldn't be audit HMAC'd; if not, it was probably originally a string
and should be. In either case, we then set the value as the raw body and
hit the flag indicating that it's already been JSON decoded so not to
try again before auditing. Doing it this way ensures the right typing.
* There is now a check to see if the data coming from unwrapping is
already JSON decoded and if so the decoding is skipped before setting
the audit response.
* Update kv command to use a preflight check
* Make the existing ui endpoint return the allowed mounts
* Add kv subcommand tests
* Enable `-field` in `vault kv get/put` (#4426)
* Enable `-field` in `vault kv get/put`
Fixes#4424
* Unify nil value handling
* Use preflight helper
* Update vkv plugin
* Add all the mount info when authenticated
* Add fix the error message on put
* add metadata test
* No need to sort the capabilities
* Remove the kv client header
* kv patch command (#4432)
* Fix test
* Fix tests
* Use permission denied instead of entity disabled
A few notes:
* We exert positive control over singletons and they usually need to
perform some (known, validated) writes, so this excludes singletons --
they are simply limited to the end of the mount function as before.
* I'm not sure how to test this _specifically_; I've done some testing
of e.g. sealing vault and unsealing and ensuring that I can write to a
KV mount. I think this is tested by every dev server though, since for a
dev server Vault is inited, the default mounts are mounted, then it's
sealed, then it's unsealed for the user, so it already goes through this
code path. The mere fact that you can write to secret/ on a dev server
means it was successfully set read-write.
* Allow returning list information and other data in 404s.
On read it'll output data and/or warnings on a 404 if they exist. On
list, the same behavior; the actual 'vault list' command doesn't change
behavior though in terms of output unless there are no actual keys (so
it doesn't just magically show other data).
This corrects some assumptions in response_util and wrapping.go; it also
corrects a few places in the latter where it could leak a (useless)
token in some error cases.
* Use same 404 logic in delete/put too
* Add the same secret parsing logic to the KV request functions
* govet cleanup in token store
* adding general ttl handling to login requests
* consolidating TTL calculation to system view
* deprecate LeaseExtend
* deprecate LeaseExtend
* set the increment to the correct value
* move calculateTTL out of SystemView
* remove unused value
* add back clearing of lease id
* implement core ttl in some backends
* removing increment and issue time from lease options
* adding ttl tests, fixing some compile issue
* adding ttl tests
* fixing some explicit max TTL logic
* fixing up some tests
* removing unneeded test
* off by one errors...
* adding back some logic for bc
* adding period to return on renewal
* tweaking max ttl capping slightly
* use the appropriate precision for ttl calculation
* deprecate proto fields instead of delete
* addressing feedback
* moving TTL handling for backends to core
* mongo is a secret backend not auth
* adding estimated ttl for backends that also manage the expiration time
* set the estimate values before calling the renew request
* moving calculate TTL to framework, revert removal of increment and issue time from logical
* minor edits
* addressing feedback
* address more feedback
* adding UI handlers and UI header configuration
* forcing specific static headers
* properly getting UI config value from config/environment
* fixing formatting in stub UI text
* use http.Header
* case-insensitive X-Vault header check
* fixing var name
* wrap both stubbed and real UI in header handler
* adding test for >1 keys
* logbridge with hclog and identical output
* Initial search & replace
This compiles, but there is a fair amount of TODO
and commented out code, especially around the
plugin logclient/logserver code.
* strip logbridge
* fix majority of tests
* update logxi aliases
* WIP fixing tests
* more test fixes
* Update test to hclog
* Fix format
* Rename hclog -> log
* WIP making hclog and logxi love each other
* update logger_test.go
* clean up merged comments
* Replace RawLogger interface with a Logger
* Add some logger names
* Replace Trace with Debug
* update builtin logical logging patterns
* Fix build errors
* More log updates
* update log approach in command and builtin
* More log updates
* update helper, http, and logical directories
* Update loggers
* Log updates
* Update logging
* Update logging
* Update logging
* Update logging
* update logging in physical
* prefixing and lowercase
* Update logging
* Move phyisical logging name to server command
* Fix som tests
* address jims feedback so far
* incorporate brians feedback so far
* strip comments
* move vault.go to logging package
* update Debug to Trace
* Update go-plugin deps
* Update logging based on review comments
* Updates from review
* Unvendor logxi
* Remove null_logger.go
* Handle removal of parent index on revoke-orphan and tidy operations
* Refactor handleTidy to use same for loop children deletion of invalid parent entry
* Update comments
* Add logic for revoke-orphan and tidy to turn no-parent tokens into orphans
* Add orphan check to test
* Update test comments
* Fix TestTokenStore_Revoke_Orphan test
* Address feedback, add explicit delete when parent prefix is empty
* Revert explicit delete, add comment on why it's not done
* Update comment to indicate ok on marking token as orphan
* Fix test
* Add more cli subcommands
* Add metadata commands
* Add more subcommands
* Update cli
* Move archive commands to delete
* Add helpers for making http calls to the kv backend
* rename cli header
* Format the various maps from kv
* Add list command
* Update help text
* Add a command to enable versioning on a backend
* Rename enable-versions command
* Some review feedback
* Fix listing of top level keys
* Fix issue when metadata is nil
* Add test for lising top level keys
* Fix some typos
* Add a note about deleting all versions
* Add some requirements for versioned k/v
* Add a warning message when an upgrade is triggered
* Add path help values
* Make the kv header a const
* Add the uid to mount entry instead of options map
* Pass the backend aware uuid to the mounts and plugins
* Fix comment
* Add options to secret/auth enable and tune CLI commands (#4170)
* Switch mount/tune options to use TypeKVPairs (#4171)
* switching options to TypeKVPairs, adding bool parse for versioned flag
* flipping bool check
* Fix leases coming back from non-leased pluin kv store
* add a test for updating mount options
* Fix tests
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* WIP on auth-list endpoint
* Rename variable to be singular, add CLI flag, show value in auth and secrets list
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Rename tag internal_ui_show_mount to _ui_show_mount
* Add tests
* Make endpoint unauthed
* Rename field to listing_visibility
* Add listing-visibility to cli tune commands
* Use ListingVisiblityType
* Fix type conversion
* Do not actually change token's value on testHttpGet
* Remove unused ListingVisibilityAuth, use const in pathInternalUIMountsRead
Prior to this policy writes against a performance secondary would not
succeed because the read-only error was swallowed by handleError. In
addition to fixing this, it adds a similar function that explicitly
doesn't trigger forwarding. This is useful for things that are local to
the secondary such as raw operations and lease management.
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Pass API values into MountEntry's config when creating auth/secrets mount
* Update usage wording
* Use an atomic value instead to communicate whether to give up HA lock
* Remove now-unneeded StopOptions struct
* Add a channel based mutex acquisition function to avoid a deadlock
* Make periodic leader refresh only spawn a single waiting goroutine and
extend logic to the key upgrade check
* Add the ability to use multiple paths for capability checking. WIP
(tests, docs).
Fixes#3336
* Added tests
* added 'paths' field
* Update docs
* return error if paths is not supplied
* Don't call LeaseExtend on login renewal paths when period is provided
* WIP tests
* NoopBackend accept backend ttl values
* Test period value on credentials backend
* Use t.Fatalf instead
* Remove mockCoreExpiration
* Add login renewal test for approle backend
* Add resp.Auth.Period check on aws and cert backend tests
* Pass in approle's period via role's period
* Correctly set period in valid-role's role
* Add period renewal test using TestCluster and approle backend
* Check for ttl values after renewals on test
* Start work on passing context to backends
* More work on passing context
* Unindent logical system
* Unindent token store
* Unindent passthrough
* Unindent cubbyhole
* Fix tests
* use requestContext in rollback and expiration managers
* Add logic for using Auth.Period when handling auth login/renew requests
* Set auth.TTL if not set in handleLoginRequest
* Always set auth.TTL = te.TTL on handleLoginRequest, check TTL and period against sys values on RenewToken
* Get sysView from le.Path, revert tests
* Add back auth.Policies
* Fix TokenStore tests, add resp warning when capping values
* Use switch for ttl/period check on RenewToken
* Move comments around
* Start work on context aware backends
* Start work on moving the database plugins to gRPC in order to pass context
* Add context to builtin database plugins
* use byte slice instead of string
* Context all the things
* Move proto messages to the dbplugin package
* Add a grpc mechanism for running backend plugins
* Serve the GRPC plugin
* Add backwards compatibility to the database plugins
* Remove backend plugin changes
* Remove backend plugin changes
* Cleanup the transport implementations
* If grpc connection is in an unexpected state restart the plugin
* Fix tests
* Fix tests
* Remove context from the request object, replace it with context.TODO
* Add a test to verify netRPC plugins still work
* Remove unused mapstructure call
* Code review fixes
* Code review fixes
* Code review fixes
* Move location of quit channel closing in exp manager
If it happens after stopping timers any timers firing before all timers
are stopped will still run the revocation function. With plugin
auto-crash-recovery this could end up instantiating a plugin that could
then try to unwrap a token from a nil token store.
This also plumbs in core so that we can grab a read lock during the
operation and check standby/sealed status before running it (after
grabbing the lock).
* Use context instead of checking core values directly
* Use official Go context in a few key places
* Doc updates and API refactoring
* fix tests
* change metadata fieldtype to TypeKVPairs
* Give example for TypeKVPairs in CLI for metadata
* Update API docs examples to reflect the native expected value for TypeKVPairs
* Don't mention comma separation in the docs for TypeCommaStringSlice
* s/groups/group; s/entities/entity; s/entity-aliases/entity-alias; s/group-aliases/group-alias
* Address review feedback
* Fix formatting
* fix sidebar links
* return group memberships of entity during read
* Add implied group memberships to read response of entity
* distinguish between all, direct and inherited group IDs of an entity
* address review feedback
* address review feedback
* s/implied/inherited in tests
* Capabilities endpoint will now return considering policies on entities and groups
* refactor the policy derivation into a separate function
* Docs: Update docs to reflect the change in capabilities endpoint
* external identity groups
* add local LDAP groups as well to group aliases
* add group aliases for okta credential backend
* Fix panic in tests
* fix build failure
* remove duplicated struct tag
* add test steps to test out removal of group member during renewals
* Add comment for having a prefix check in router
* fix tests
* s/parent_id/canonical_id
* s/parent/canonical in comments and errors
* Redo the API client quite a bit to make the behavior of NewClient more
predictable and add locking to make it safer to use with Clone() and if
multiple goroutines for some reason decide to change things.
Along the way I discovered that currently, the x/net/http2 package is
broke with the built-in h2 support in released Go. For those using
DefaultConfig (the vast majority of cases) this will be a non-event.
Others can manually call http2.ConfigureTransport as needed. We should
keep an eye on commits on that repo and consider more updates before
release. Alternately we could go back revisions but miss out on bug
fixes; my theory is that this is not a purposeful break and I'll be
following up on this in the Go issue tracker.
In a few tests that don't use NewTestCluster, either for legacy or other
reasons, ensure that http2.ConfigureTransport is called.
* Use tls config cloning
* Don't http2.ConfigureServer anymore as current Go seems to work properly without requiring the http2 package
* Address feedback
This removes all references I could find to:
- credential provider
- authentication backend
- authentication provider
- auth provider
- auth backend
in favor of the unified:
- auth method
* Allow more complex errors from plugins
This enables more complex types to be registered and returned from plugins.
* Register common error types
This is a slightly less drastic change, which keeps the HTTPCodedError
as an interface.
* Remove replication error from list
* porting identity to OSS
* changes that glue things together
* add testing bits
* wrapped entity id
* fix mount error
* some more changes to core
* fix storagepacker tests
* fix some more tests
* fix mount tests
* fix http mount tests
* audit changes for identity
* remove upgrade structs on the oss side
* added go-memdb to vendor
* disable raw endpoint by default
* adding docs
* config option raw -> raw_storage_endpoint
* docs updates
* adding listing on raw endpoint
* reworking tests for enabled raw endpoints
* root protecting base raw endpoint
* Lazy load plugins to avoid setup-unwrap cycle
* Remove commented blocks
* Refactor NewTestCluster, use single core cluster on basic plugin tests
* Set c.pluginDirectory in TestAddTestPlugin for setupPluginCatalog to work properly
* Add special path to mock plugin
* Move ensureCoresSealed to vault/testing.go
* Use same method for EnsureCoresSealed and Cleanup
* Bump ensureCoresSealed timeout to 60s
* Correctly handle nil opts on NewTestCluster
* Add metadata flag to APIClientMeta, use meta-enabled plugin when mounting to bootstrap
* Check metadata flag directly on the plugin process
* Plumb isMetadataMode down to PluginRunner
* Add NOOP shims when running in metadata mode
* Remove unused flag from the APIMetadata object
* Remove setupSecretPlugins and setupCredentialPlugins functions
* Move when we setup rollback manager to after the plugins are initialized
* Fix tests
* Fix merge issue
* start rollback manager after the credential setup
* Add guards against running certain client and server functions while in metadata mode
* Call initialize once a plugin is loaded on the fly
* Add more tests, update basic secret/auth plugin tests to trigger lazy loading
* Skip mount if plugin removed from catalog
* Fixup
* Remove commented line on LookupPlugin
* Fail on mount operation if plugin is re-added to catalog and mount is on existing path
* Check type and special paths on startBackend
* Fix merge conflicts
* Refactor PluginRunner run methods to use runCommon, fix TestSystemBackend_Plugin_auth
Previously we lowercased names on ingress but not on lookup or delete
which could cause unexpected results. Now, just unilaterally lowercase
policy names on write and delete. On get, to avoid the performance hit
of always lowercasing when not necessary since it's in the critical
path, we have a minor optimization -- we check the LRU first before
normalizing. For tokens, because they're already normalized when adding
policies during creation, this should always work; it might just be
slower for API calls.
Fixes#3187
* Add automatic plugin reload
* Refactor builtin/backend
* Remove plugin reload at the core level
* Refactor plugin tests
* Add auto-reload test case
* Change backend to use sync.RWMutex, fix dangling test plugin processes
* Add a canary to plugin backends to avoid reloading many times (#3174)
* Call setupPluginCatalog before mount-related operations in postUnseal
* Don't create multiple system backends since core only holds a reference (#3176)
to one.
* Add plugin reload capability on all mounts for a specific plugin type
* Comments cleanup
* Add per-mount plugin backend reload, add tests
* Fix typos
* Remove old comment
* Reuse existing storage view in reloadPluginCommon
* Correctly handle reloading auth plugin backends
* Update path to plugin/backend/reload
* Use multierrors on reloadMatchingPluginMounts, attempt to reload all mounts provided
* Use internal value as check to ensure plugin backend reload
* Remove connection state from request for plugins at the moment
* Minor cleanup
* Refactor tests
* Store original request path in WrapInfo as CreationPath
* Add wrapping_token_creation_path to CLI output
* Add CreationPath to AuditResponseWrapInfo
* Fix tests
* Add and fix tests, update API docs with new sample responses
We still perform validation on the token, so if the call makes it
through to this endpoint it's got a valid token (either explicitly
specified in data or as the request token). But this allows
introspection for sanity/safety checking without revoking the token in
the process.
gRPC doesn't have a handler for recovering from a panic like a normal
HTTP request so a panic will actually kill Vault's listener. This
basically copies the net/http logic for managing this.
The SSH-specific logic is removed here as the underlying issue is caused
by the request forwarding mechanism.
* Add backend plugin changes
* Fix totp backend plugin tests
* Fix logical/plugin InvalidateKey test
* Fix plugin catalog CRUD test, fix NoopBackend
* Clean up commented code block
* Fix system backend mount test
* Set plugin_name to omitempty, fix handleMountTable config parsing
* Clean up comments, keep shim connections alive until cleanup
* Include pluginClient, disallow LookupPlugin call from within a plugin
* Add wrapper around backendPluginClient for proper cleanup
* Add logger shim tests
* Add logger, storage, and system shim tests
* Use pointer receivers for system view shim
* Use plugin name if no path is provided on mount
* Enable plugins for auth backends
* Add backend type attribute, move builtin/plugin/package
* Fix merge conflict
* Fix missing plugin name in mount config
* Add integration tests on enabling auth backend plugins
* Remove dependency cycle on mock-plugin
* Add passthrough backend plugin, use logical.BackendType to determine lease generation
* Remove vault package dependency on passthrough package
* Add basic impl test for passthrough plugin
* Incorporate feedback; set b.backend after shims creation on backendPluginServer
* Fix totp plugin test
* Add plugin backends docs
* Fix tests
* Fix builtin/plugin tests
* Remove flatten from PluginRunner fields
* Move mock plugin to logical/plugin, remove totp and passthrough plugins
* Move pluginMap into newPluginClient
* Do not create storage RPC connection on HandleRequest and HandleExistenceCheck
* Change shim logger's Fatal to no-op
* Change BackendType to uint32, match UX backend types
* Change framework.Backend Setup signature
* Add Setup func to logical.Backend interface
* Move OptionallyEnableMlock call into plugin.Serve, update docs and comments
* Remove commented var in plugin package
* RegisterLicense on logical.Backend interface (#3017)
* Add RegisterLicense to logical.Backend interface
* Update RegisterLicense to use callback func on framework.Backend
* Refactor framework.Backend.RegisterLicense
* plugin: Prevent plugin.SystemViewClient.ResponseWrapData from getting JWTs
* plugin: Revert BackendType to remove TypePassthrough and related references
* Fix typo in plugin backends docs
* exclude /sys/leases/renew from registering with expiration manager
* adding sys/leases/renew to return full secret object, adding tests to catch renew errors
A change in copystructure has caused some panics due to the custom copy
function. I'm more nervous about production panics than I am about
keeping some bad code wiping out some existing warnings, so remove the
custom copy function and just allow direct setting of Warnings.
Jim Kalafut