* The fields.
* UserID set, add to certificate
* Changelog.
* Fix test (set default).
* Add UserID constant to certutil, revert extension changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add user_ids as field for leaf signing
Presumably, this isn't necessary for CAs, given that CAs probably don't
have a user ID corresponding to them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support setting multiple user_ids in Subject
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow any User ID with sign-verbatim
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for User IDs in PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs about user_ids, allowed_user_ids
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Parallel migration (#18815)
* flagParallel sanity check
* Attempt to use ErrGroups
* Updated docs
* Allow 'start' and 'max-parallel' together
* parallel flag renamed to max-parallel
* tests for start + parallel
* Removed permit pool
* Updated docs to make it clearer that a high setting might not be honored based on storage backend setting
* System dependent max int size
* Default max-parallel 1 => 10
* Test folder/paths updated
Co-authored-by: Tomasz Pawelczak <10206601+gites@users.noreply.github.com>
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* wip
* wip
* Got it 'working', but not happy about cleanliness yet
* Switch to a dedicated defaultSeal with recovery keys
This is simpler than trying to hijack SealAccess as before. Instead, if the operator
has requested recovery unseal mode (via a flag in the seal stanza), we new up a shamir
seal with the recovery unseal key path instead of the auto seal. Then everything proceeds
as if you had a shamir seal to begin with.
* Handle recovery rekeying
* changelog
* Revert go.mod redirect
* revert multi-blob info
* Dumb nil unmarshal target
* More comments
* Update vault/seal.go
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Update changelog/18683.txt
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* pr feedback
* Fix recovery rekey, which needs to fetch root keys and restore them under the new recovery split
* Better comment on recovery seal during adjustSealMigration
* Make it possible to migrate from an auto-seal in recovery mode to shamir
* Fix sealMigrated to account for a recovery seal
* comments
* Update changelog/18683.txt
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Address PR feedback
* Refactor duplicated migration code into helpers, using UnsealRecoveryKey/RecoveryKey where appropriate
* Don't shortcut the reast of seal migration
* get rid of redundant transit server cleanup
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* change indentation leve of cas field
* change formatting for cas_required
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
* Adds managed key usages for MAC generate/verify and RNG.
* Remove MAC-related key usages from managed key in favor of sign/verify.
* Remove context from random source managed key interface.
* refactor parser to pull serial number from subject
* refactor pki parser
* uninstall pvtutils
* remove hideFormSection as attr
* remove hideFormSection as attr
* add string-list
* test removing issueDate
* update tests
* final answer - make number types
* change to unix time - since valueOf() is typically used internally
* add algo mapping
* add comment to complete in followon
* add attrs to pki parser
* add conditional operands so parser continues when values dont exist
* add error handling WIP
* finish tests, add error handling
* revert to helper
* move helper to util
* add parseSubject test
* finish tests
* move certs to pki helper file
* wrap parsing functions in try...catch
* named MFA method configurations
* fix a test
* CL
* fix an issue with same config name different ID and add a test
* feedback
* feedback on test
* consistent use of passcode for all MFA methods (#18611)
* make use of passcode factor consistent for all MFA types
* improved type for MFA factors
* add method name to login CLI
* minor refactoring
* only accept MFA method name with its namespace path in the login request MFA header
* fix a bug
* fixing an ErrorOrNil return value
* more informative error message
* Apply suggestions from code review
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* feedback
* test refactor a bit
* adding godoc for a test
* feedback
* remove sanitize method name
* guard a possbile nil ref
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
- It does not make sense to allow operators to enable the cross-cluster
revocation features on local mounts as they will never have a
corresponding mount on the other cluster.
* Add unified CRL config storage helpers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support to build unified CRLs
This allows us to build unified versions of both the complete and delta
CRLs. This mostly involved creating a new variant of the
unified-specific CRL builder, fetching certs from each cluster's storage
space.
Unlike OCSP, here we do not unify the node's local storage with the
cross-cluster storage: this node is the active of the performance
primary, so writes to unified storage happen exactly the same as
writes to cluster-local storage, meaning the two are always in
sync. Other performance secondaries do not rebuild the CRL, and hence
the out-of-sync avoidance that we'd like to solve with the OCSP
responder is not necessary to solve here.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to fetch unified CRLs
This adds to the path-fetch APIs the ability to return the unified CRLs.
We update the If-Modified-Since infrastructure to support querying the
unified CRL specific data and fetchCertBySerial to support all unified
variants. This works for both the default/global fetch APIs and the
issuer-specific fetch APIs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rebuild CRLs on unified status changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle rebuilding CRLs due to either changing
This allows detecting if the Delta CRL needs to be rebuilt because
either the local or the unified CRL needs to be rebuilt. We never
trigger rebuilding the unified delta on a non-primary cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serials aren't added to unified CRL twice
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update golang.org/x/crypto version
go get -u golang.org/x/crypto && go mod tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update golang.org/x/crypto version in api
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update golang.org/x/crypto version in sdk
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Write delta WAL entries for unified CRLs
When we'd ordinarily write delta WALs for local CRLs, we also need to
populate the cross-cluster delta WAL. This could cause revocation to
appear to fail if the two clusters are disconnected, but notably regular
cross-cluster revocation would also fail.
Notably, this commit also changes us to not write Delta WALs when Delta
CRLs is disabled (versus previously doing it when auto rebuild is
enabled in case Delta CRLs were later asked for), and instead,
triggering rebuilding a complete CRL so we don't need up-to-date Delta
WAL info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update IMS test for forced CRL rebuilds
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move comment about perf-primary only invalidation
Also remove noisy debug log.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove more noisy log statements during queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Skip revocation entries from our current cluster
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add locking and comment about tidying revoke queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to time.Since for tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidyStatuses into path_tidy.go
Leaving these in backend.go often causes us to miss adding useful values
to tidyStatus when we add a new config parameter.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Track the number of deleted revocation request
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to remove confirmed revocation requests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing field to tidy test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* return error for meta auth and mount listing if sealed
* some logging changes
* some more logging changes
* add panic recovery
* use ErrInternalError
* Add global, cross-cluster revocation queue to PKI
This adds a global, cross-cluster replicated revocation queue, allowing
operators to revoke certificates by serial number across any cluster. We
don't support revoking with private key (PoP) in the initial
implementation.
In particular, building on the PBPWF work, we add a special storage
location for handling non-local revocations which gets replicated up to
the active, primary cluster node and back down to all secondary PR
clusters. These then check the pending revocation entry and revoke the
serial locally if it exists, writing a cross-cluster confirmation entry.
Listing capabilities are present under pki/certs/revocation-queue,
allowing operators to see which certs are present. However, a future
improvement to the tidy subsystem will allow automatic cleanup of stale
entries.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidying revocation queue entries
No manual operator control of revocation queue entries are allowed.
However, entries are stored with their request time, allowing tidy to,
after a suitable safety buffer, remove these unconfirmed and presumably
invalid requests.
Notably, when a cluster goes offline, it will be unable to process
cross-cluster revocations for certificates it holds. If tidy runs,
potentially valid revocations may be removed. However, it is up to the
administrator to ensure the tidy window is sufficiently long that any
required maintenance is done (or, prior to maintenance when an issue is
first noticed, tidy is temporarily disabled).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Only allow enabling global revocation queue on Vault Enterprise
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a locking queue to handle revocation requests
This queue attempts to guarantee that PKI's invalidateFunc won't have
to wait long to execute: by locking only around access to the queue
proper, and internally using a list, we minimize the time spent locked,
waiting for queue accesses.
Previously, we held a lock during tidy and processing that would've
prevented us from processing invalidateFunc calls.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* use_global_queue->cross_cluster_revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Grab revocation storage lock when processing queue
We need to grab the storage lock as we'll actively be revoking new
certificates in the revocation queue. This ensures nobody else is
competing for storage access, across periodic funcs, new revocations,
and tidy operations.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix expected tidy status test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow probing RollbackManager directly in tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback on revocationQueue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more cancel checks, fix starting manual tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add WriteForwardedStorage to sdk's plugin, logical in OSS
This should allow backends to specify paths to forward write
(storage.Put(...) and storage.Delete(...)) operations for.
Notably, these semantics are subject to change and shouldn't yet be
relied on.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Collect paths for write forwarding in OSS
This adds a path manager to Core, allowing tracking across all Vault
versions of paths which could use write forwarding if available. In
particular, even on OSS offerings, we'll need to template {{clusterId}}
into the paths, in the event of later upgrading to Enterprise. If we
didn't, we'd end up writing paths which will no longer be accessible
post-migration, due to write forwarding now replacing the sentinel with
the actual cluster identifier.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add forwarded writer implementation to OSS
Here, for paths given to us, we determine if we need to do cluster
translation and perform local writing. This is the OSS variant.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Wire up mount-specific request forwarding in OSS
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify that state lock needs to be held to call HAState in OSS
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move cluster sentinel constant to sdk/logical
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Expose ClusterID to Plugins via SystemView
This will let plugins learn what the Cluster's ID is, without having to
resort to hacks like writing a random string to its cluster-prefixed
namespace and then reading it once it has replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add GRPC ClusterID implementation
For any external plugins which wish to use it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Initial beta modal set up
* Add back to old pki from engine
* Remove commented out code
* Add stylesheet and tests!
* Address feedback!
* Add id to input
* added audit-hash operations
* more audit paths
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* added audit fields
* add changelog file
* dynamic fields should be nil
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* start to add test helper
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* add tests for /sys/audit openapi paths
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
Co-authored-by: Anton Averchenkov <anton.averchenkov@hashicorp.com>
* Ember Engine for Kubernetes Secrets Engine (#17881)
* adds in-repo ember engine for kubernetes secrets engine
* updates kubernetes engine class name
* Kubernetes route plumbing (#17895)
* kubernetes route plumbing
* adds kubernetes role index route with redirect to details
* adds kubernetes as mountable and supported secrets engine (#17891)
* adds models, adapters and serializers for kubernetes secrets engine (#18010)
* adds mirage factories and handlers for kubernetes (#17943)
* Kubernetes Secrets Engine Configuration (#18093)
* moves RadioCard component to core addon
* adds kubernetes configuration view
* fixes tests using RadioCard after label for and input id changes
* adds confirm modal when editing kubernetes config
* addresses review comments
* Kubernetes Configuration View (#18147)
* removes configuration edit and index routes
* adds kubernetes configuration view
* Kubernetes Roles List (#18211)
* removes configuration edit and index routes
* adds kubernetes configuration view
* adds kubernetes secrets engine roles list view
* updates role details disabled state to explicitly check for false
* VAULT-9863 Kubernetes Overview Page (#18232)
* Add overview page view
* Add overview page tests
* Address feedback to update tests and minor changes
* Use template built in helper for conditionally showing num roles
* Set up roleOptions in constructor
* Set up models in tests and fix minor bug
* Kubernetes Secrets Engine Create/Edit Views (#18271)
* moves kv-object-editor to core addon
* moves json-editor to core addon
* adds kubernetes secrets engine create/edit views
* updates kubernetes/role adapter test
* addresses feedback
* fixes issue with overview route showing 404 page (#18303)
* Kubernetes Role Details View (#18294)
* moves format-duration helper to core addon
* adds kubernetes secrets engine role details view
* adds tests for role details page component
* adds capabilities checks for toolbar actions
* fixes list link for secrets in an ember engine (#18313)
* Manual Testing: Bug Fixes and Improvements (#18333)
* updates overview, configuration and roles components to pass args for individual model properties
* bug fixes and improvements
* adds top level index route to redirect to overview
* VAULT-9877 Kubernetes Credential Generate/View Pages (#18270)
* Add credentials route with create and view components
* Update mirage response for creds and add ajax post call for creds in adapter
* Move credentials create and view into one component
* Add test classes
* Remove files and update backend property name
* Code cleanup and add tests
* Put test helper in helper function
* Add one more test!
* Add code optimizations
* Fix model in route and add form
* Add onSubmit to form and preventDefault
* Fix tests
* Update mock data for test to be strong rather than record
* adds acceptance tests for kubernetes secrets engine roles (#18360)
* VAULT-11862 Kubernetes acceptance tests (#18431)
* VAULT-12185 overview acceptance tests
* VAULT-12298 credentials acceptance tests
* VAULT-12186 configuration acceptance tests
* VAULT-12127 Refactor breadcrumbs to use breadcrumb component (#18489)
* VAULT-12127 Refactor breadcrumbs to use Page::Breadcrumbs component
* Fix failing tests by adding breadcrumbs properties
* VAULT-12166 add jsdocs to kubernetes secrets engine pages (#18509)
* fixes incorrect merge conflict resolution
* updates kubernetes check env vars endpoint (#18588)
* hides kubernetes ca cert field if not defined in configuration view
* fixes loading substate handling issue (#18592)
* adds changelog entry
Co-authored-by: Kianna <30884335+kiannaquach@users.noreply.github.com>
Kit Haines