Since 1.9 k8s auth method supports setting Name reported by auth method to Service Account name which is not reflected in this doc
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Clarify language around PSS CSR issues
Also point out that PKCS#11 tokens have the same problem.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/docs/secrets/pki/considerations.mdx
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update go version to 1.19.2
This commit updates the default version of go to 1.19.2. This update
includes minor security fixes for archive/tar, net/http/httputil, and
regexp packages.
For more information on the release, see: https://go.dev/doc/devel/release#go1.19.2
* Update Docker versions in CI to 20.10.17
After updating Vault to go version 1.19.2, there were several SIGABRTs
in the vault tests. These were related to a missing `pthread_create`
syscall in Docker. Since CI was using a much older version of Docker,
the fix was to bump it to latest-1 (20.10.17).
While we're at it, add a note in the developer docs encouraging the use
of the latest Docker version.
Add some metrics helpful for monitoring raft cluster state.
Furthermore, we weren't emitting bolt metrics on regular (non-perf) standbys, and there were other metrics
in metricsLoop that would make sense to include in OSS but weren't. We now have an active-node-only func,
emitMetricsActiveNode. This runs metricsLoop on the active node. Standbys and perf-standbys run metricsLoop
from a goroutine managed by the runStandby rungroup.
* Add 'note' for surpassing dead server threshold time
* Update website/content/docs/commands/operator/raft.mdx
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Allow OCSP to use issuer's RevocationSigAlgo
When an issuer specifies a RevocationSigAlgo, we should largely follow
this for both CRLs and OCSP. However, x/crypto/ocsp lacks support for
PSS signatures, so we drop these down to PKCS#1v1.5 instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when issuer has PSS-based RevSigAlgo
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about OCSP and PSS support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* add raft index to telemetry
* add definitions and defaults to both autopilot pages
* adjust messages
* Revert "add raft index to telemetry"
This reverts commit 010b091c7e35c1da677567746db90b490ca707ab.
docs: Add docs for PKCS#11 provider
The PKCS#11 provider is being released shortly.
This moves over the preliminary docs and cleans them up.
I added them as a new section under "Vault Enterprise" ->
"PKCS#11 Provider", but I am open to suggestion on if there is a
better place for them, e.g., "Platforms", or somehow merging
with "Vault Enterprise" -> "HSM"?
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* PKI: Add support for signature_bits param to the intermediate/generate api
- Mainly to work properly with GCP backed managed keys, we need to
issue signatures that would match the GCP key algorithm.
- At this time due to https://github.com/golang/go/issues/45990 we
can't issue PSS signed CSRs, as the libraries in Go always request
a PKCS1v15.
- Add an extra check in intermediate/generate that validates the CSR's
signature before providing it back to the client in case we generated
a bad signature such as if an end-user used a GCP backed managed key
with a RSA PSS algorithm.
- GCP ignores the requested signature type and always signs with the
key's algorithm which can lead to a CSR that says it is signed with
a PKCS1v15 algorithm but is actually a RSA PSS signature
* Add cl
* PR feedback
* Added flag and env var which will disable client redirection
* Added changelog
* Docs fix for unsaved file, and test single request made
* Updated test for case when redirect is enabled, updated docs based on suggestions
* Update docs for new test/sign params for managed key api
- The existing test/sign managed key api now has two new api params
allowing an operator to specify to use RSA PSS signatures (use_pss)
and to specify the hashing algorithm to use (hash_algorithm)
* Remove duplicate GCP signing algo entry
* Formatting nits and mention the key_ring for GCP needs to exist prior to usage
* Add some additional GCP environment vars
* docs/api-docs for Redis
* update doc
* add navigation to the docs
* Update website/content/api-docs/secret/databases/redis.mdx
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* update setup list and lang tag for shell code blocks
* update language tag
* update based on suggestions
* update docs to include tls params
* add plugin to the plugin portal doc
* add -
* update api-docs-nav-data.json
* update field name
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/api-docs/secret/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* update docs
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* add api docs for transform byok endpoints
* add byok description to transform index page
* fix merge conflicts
* remove import_version for FPE
* text edits and add note about convergent tokenization
* add note for convergent tokenization
* Fix interoperability concerns with PSS
When Go parses a certificate with rsaPSS OID, it will accept this
certificate but not parse the SubjectPublicKeyInfo, leaving the
PublicKeyAlgorithm and PublicKey fields blank, but otherwise not erring.
The same behavior occurs with rsaPSS OID CSRs.
On the other hand, when Go parses rsaPSS OID PKCS8 private keys, these
keys will fail to parse completely.
Thus, detect and fail on any empty PublicKey certs and CSRs, warning the
user that we cannot parse these correctly and thus refuse to operate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Run more PKI tests in parallel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add notes about PSS shortcomings to considerations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fetch CRLs from a user defined CDP (PoC)
* Handle no param sent
* Move CRL fetch to a periodFunc. Use configured CA certs + system root as trusted certs for CRL fetch
* comments
* changelog
* Just use root trust
* cdp->url in api
* Store CRL and populate it initially in cdlWrite
* Update docs
* Update builtin/credential/cert/path_crls.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Handle pre-verification of a CRL url better
* just in case
* Fix crl write locking
* Add a CRL fetch unit test
* Remove unnecessary validity clear
* Better func name
* Don't exit early updating CRLs
* lock in updateCRLs
* gofumpt
* err-
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add more notes about issuer revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Note BYOC in considerations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about http access to CRLs, OCSP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Recommend enabling auto-tidy & crl rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing paths to personas
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Update the documentation in regards to the private_key_format
argument only controls the behavior of the private_key response field
and does not modify the encoding of the private key within the
pem_bundle.
Update deprecation notice related to SHA-1 in Go 1.18+
Go 1.19 has not removed SHA-1 support, and it is not clear yet when
they will remove support, so we need to slightly adjust our docs.
* docs/helm: use pod labels for upgrades
* Grammar
* Update website/content/docs/platform/k8s/helm/run.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Update website/content/docs/platform/k8s/helm/run.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* core: Handle deprecated mounts on enable and unseal
* changelog: Deprecation Status handling
* core: Add Pending Removal override var
* core: Add some documentation for Pending Removal override
* Get import correct
* limits, docs
* changelog
* unit tests
* And fix import for hmac unit test
* typo
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Update builtin/logical/transit/path_keys.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Validate key sizes a bit more carefully
* Update sdk/helper/keysutil/policy.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Add fields 'ttl' and 'num_uses' to SecretID generation.
Add fields 'ttl' and 'num_uses' when generating/obtaining a SecretID.
Rather than just being able to use the Role's SecretID ttl and num uses. #14390
* Add secret_id_num_uses response field to generating SecretID
Add the response field secret_id_num_uses to the endpoints for generating
SecretIDs. Used in testing but also to supply the vendor with this variable.
* Add tests for new ttl and num_uses SecretID generation fields
Add tests to assert the new TTL and NumUses option in the SecretID entry.
Separate test for testing with just parameters vs a -force example.
* Patch up test for ttl and num_uses fields
* Add changelog entry for auth/approle 'ttl' and 'num_uses' fields
* Add fields to API Docs and AppRole Auth Docs example
* Correct error message for failing test on missing field.
Change the error message produced when a test fails due to a missing field.
Previous values did not map to correct fields.
* Remove unnecessary int cast to int "secret_id_num_uses" field.
Unnecessary cast to int where type already is int.
* Move numUses field check to after assignment.
* Remove metadata entry in sample payload to limit change to changes made.
Remove metadata entry in sample payload for custom-secret-id. The metadata was not
changed in the features pull request.
* Bind fields 'ttl' and 'num_uses' to role's configuration.
Rather than implicitly overriding, error when the ttl is lower than and the num
uses higher than the role's configuration. #14390
* Update changelog 14474 with a more detailed description.
More elaborate description for the changelog. Specifying the per-request based fields.
* Elaborate more on the bounds of the 'ttl' and 'num_uses' field.
Specify in both the api-docs and the CLI the limits of the fields.
Specify that the role's configuration is still the leading factor.
* Upper bound ttl with role secret id ttl
Upper bound ttl with role secret id ttl when creating a secret id
Adding test cases for infinite ttl and num uses
Adding test cases for negative ttl and num uses
Validation on infinite ttl and num uses
* Formatting issues. Removed unnecessary newline
* Update documentation for AppRole Secret ID and Role
Changed that TTL is not allowed to be shorter to longer
* Cleanup approle secret ID test and impl
* Define ttl and num_uses in every test
Define ttl and num_uses in every test despite them not being tested.
This is to ensure that no unexpected behaviour comes to mind.
* Rename test RoleSecretID -> RoleSecretIDWithoutFields
* Test secret id generation defaults to Role's config
Test secret id generation defaults to Role's configuration entries.
* Change finit -> finite
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* Rephrase comments to the correct validation check
* Rephrase role-secret-id option description
* Remove "default" incorrect statement about ttl
* Remove "default" incorrect statement about ttl for custom secret id
* Touch up approle.mdx to align more with path_role documentation
Co-authored-by: Remco Buddelmeijer <r.buddelmeijer@fullstaq.com>
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* auth: Add Deprecation Status to auth list -detailed
* secrets: Add Deprecation Status to secrets list -detailed
* Add changelog entry for deprecation status list
* Add path to manually rebuild delta CRLs
The crl/rotate-delta path behaves like crl/rotate, triggering a
cluster-local rebuild of just the delta CRL. This is useful for when
delta CRLs are enabled with a longer-than-desired auto-rebuild period
after some high-profile revocations occur.
In the event delta CRLs are not enabled, this becomes a no-op.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for Delta CRL rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update documentation about Delta CRLs
Also fixes a omission in the If-Modified-Since docs to mention that the
response header should probably also be passed through.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy operations to be cancelled
When tidy operations take a long time to execute (and especially when
executing them automatically), having the ability to cancel them becomes
useful to reduce strain on Vault clusters (and let them be rescheduled
at a later time).
To this end, we add the /tidy-cancel write endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing auto-tidy synopsis / description
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a pause duration between tidying certificates
By setting pause_duration, operators can have a little control over the
resource utilization of a tidy operation. While the list of certificates
remain in memory throughout the entire operation, a pause is added
between processing certificates and the revocation lock is released.
This allows other operations to occur during this gap and potentially
allows the tidy operation to consume less resources per unit of time
(due to the sleep -- though obviously consumes the same resources over
the time of the operation).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for cancellation, pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API docs on pause_duration, /tidy-cancel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add lock releasing around tidy pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Reset cancel guard, return errors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* docs: update plugin docs for secrets/auth multiplexing
* update index
* update plugin development
* fix spacing in code snippet
* update links to multiplexing resources
* add note on sdk version and update db example text
* Update website/content/docs/plugins/plugin-architecture.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* reword index intro
* Update website/content/docs/plugins/plugin-development.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/plugins/plugin-development.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* remove word and fix code format
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* accommodate salt lengths for RSA PSS
* address feedback
* generalise salt length to an int
* fix error reporting
* Revert "fix error reporting"
This reverts commit 8adfc15fe3303b8fdf9f094ea246945ab1364077.
* fix a faulty check
* check for min/max salt lengths
* stringly-typed HTTP param
* unit tests for sign/verify HTTP requests
also, add marshaling for both SDK and HTTP requests
* randomly sample valid salt length
* add changelog
* add documentation
* VAULT-7707 Add docs around making mass amounts of lease count quotas via automation
* VAULT-7707 Changelog
* VAULT-7707 add word
* VAULT-7707 Update some small wordings
* VAULT-7707 use a real em dash
* Add remove_roots_from_chain flag to sign and issue pki apis
- Add a new flag to allow end-users to control if we return the
root/self-signed CA certificate within the list of certificates in
ca_chain field on issue and sign api calls.
* Add cl
* PR feedback
* Add ability to perform automatic tidy operations
This enables the PKI secrets engine to allow tidy to be started
periodically by the engine itself, avoiding the need for interaction.
This operation is disabled by default (to avoid load on clusters which
don't need tidy to be run) but can be enabled.
In particular, a default tidy configuration is written (via
/config/auto-tidy) which mirrors the options passed to /tidy. Two
additional parameters, enabled and interval, are accepted, allowing
auto-tidy to be enabled or disabled and controlling the interval
(between successful tidy runs) to attempt auto-tidy.
Notably, a manual execution of tidy will delay additional auto-tidy
operations. Status is reported via the existing /tidy-status endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent race during parallel testing
We modified the RollbackManager's execution window to allow more
faithful testing of the periodicFunc. However, the TestAutoRebuild and
the new TestAutoTidy would then race against each other for modifying
the period and creating their clusters (before resetting to the old
value).
This changeset adds a lock around this, preventing the races.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use tidyStatusLock to gate lastTidy time
This prevents a data race between the periodic func and the execution of
the running tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add read lock around tidyStatus gauges
When reading from tidyStatus for computing gauges, since the underlying
values aren't atomics, we really should be gating these with a read lock
around the status access.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* honor header if-modified-since if present
* pathGetIssuerCRL first version
* check if modified since for CA endpoints
* fix date comparison for CA endpoints
* suggested changes and refactoring
* add writeIssuer to updateDefaultIssuerId and fix error
* Move methods out of storage.go into util.go
For the most part, these take a SC as param, but aren't directly storage
relevant operations. Move them out of storage.go as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use UTC timezone for storage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rework path_fetch for better if-modified-since handling
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Invalidate all issuers, CRLs on default write
When the default is updated, access under earlier timestamps will not
work as we're unclear if the timestamp is for this issuer or a previous
issuer. Thus, we need to invalidate the CRL and both issuers involved
(previous, next) by updating their LastModifiedTimes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for If-Modified-Since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invalidate default issuer changes
When the default issuer changes, we'll have to mark the invalidation on
PR secondary clusters, so they know to update their CRL mapping as well.
The swapped issuers will have an updated modification time (which will
eventually replicate down and thus be correct), but the CRL modification
time is cluster-local information and thus won't be replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sendNotModifiedResponseIfNecessary
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on if-modified-since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow generation of up-to-date delta CRLs
While switching to periodic rebuilds of CRLs alleviates the constant
rebuild pressure on Vault during times of high revocation, the CRL
proper becomes stale. One response to this is to switch to OCSP, but not
every system has support for this. Additionally, OCSP usually requires
connectivity and isn't used to augment a pre-distributed CRL (and is
instead used independently).
By generating delta CRLs containing only new revocations, an existing
CRL can be supplemented with newer revocations without requiring Vault
to rebuild all complete CRLs. Admins can periodically fetch the delta
CRL and add it to the existing CRL and applications should be able to
support using serials from both.
Because delta CRLs are emptied when the next complete CRL is rebuilt, it
is important that applications fetch the delta CRL and correlate it to
their complete CRL; if their complete CRL is older than the delta CRL's
extension number, applications MUST fetch the newer complete CRL to
ensure they have a correct combination.
This modifies the revocation process and adds several new configuration
options, controlling whether Delta CRLs are enabled and when we'll
rebuild it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback: fix several bugs
Thanks Steve!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invoke periodic func on active nodes
We need to ensure we read the updated config (in case of OCSP request
handling on standby nodes), but otherwise want to avoid CRL/DeltaCRL
re-building.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy steps into two separate helpers
This refactors the tidy go routine into two separate helpers, making it
clear where the boundaries of each are: variables are passed into these
method and concerns are separated. As more operations are rolled into
tidy, we can continue adding more helpers as appropriate. Additionally,
as we move to make auto-tidy occur, we can use these as points to hook
into periodic tidying.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor revInfo checking to helper
This allows us to validate whether or not a revInfo entry contains a
presently valid issuer, from the existing mapping. Coupled with the
changeset to identify the issuer on revocation, we can begin adding
capabilities to tidy to update this association, decreasing CRL build
time and increasing the performance of OCSP.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor issuer fetching for revocation purposes
Revocation needs to gracefully handle using the old legacy cert bundle,
so fetching issuers (and parsing them) needs to be done slightly
differently than other places. Refactor this from revokeCert into a
common helper that can be used by tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to associate revoked certs, issuers
When revoking a certificate, we need to associate the issuer that signed
its certificate back to the revInfo entry. Historically this was
performed during CRL building (and still remains so), but when running
without CRL building and with only OCSP, performance will degrade as the
issuer needs to be found each time.
Instead, allow the tidy operation to take over this role, allowing us to
increase the performance of OCSP and CRL in this scenario, by decoupling
issuer identification from CRL building in the ideal case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for tidy updates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on new tidy parameter, metrics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy config into shared struct
Finish adding metrics, status messages about new tidy operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Agent parameters: & example corrected and another added with inter-links between agent-template and agent-config pages.
* Agent parameters - typo in template_config description / text.
* Update google-cloud-storage backend documentation
Add mentions the environment variables that can be used to configure the backend instead of using the stanza parameters
* Add changelog file
* Fix some typos
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #1
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #2
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #3
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Add ocsp_expiry configuration field to PKI crl config
- Add a new configurable duration field to the crl configuration to
allow operator control of how long an OCSP response can be cached
for.
- This is useful for how long a server like NGINX/Apache is
allowed to cache the response for OCSP stapling.
- A value of 0 means no one should cache the response.
- Address an issue discovered that we did not upgrade existing crl
configurations properly
* PR feedback
* Allow correct importing of certs without CRL KU
When Vault imports certificates without KU for CRLSign, we shouldn't
provision CRLUsage on the backing issuer; otherwise, we'll attempt to
build CRLs and Go will cause us to err out. This change makes it clear
(at issuer configuration time) that we can't possibly support this
operation and hopefully prevent users from running into the more cryptic
Go error.
Note that this does not apply for OCSP EKU: the EKU exists, per RFC 6960
Section 2.6 OCSP Signature Authority Delegation, to allow delegation of
OCSP signing to a child certificate. This EKU is not necessary on the
issuer itself, and generally assumes issuers are allowed to issue OCSP
responses regardless of KU/EKU.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs to clarify issue with import, CRL usage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
* Add additional test assertion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update seal.mdx
The following sentence does not read easily:
"Take down the old active node, update its configuration of the old active node to use the new seal blocks (completely unaware of the old seal type) and bring it back up."
I have changed this to the sentence below, which I believe reads better.
Take down the old active node, update its configuration to use the new seal blocks (completely unaware of the old seal type) and bring it back up.
* Update website/content/docs/concepts/seal.mdx
* trigger ci
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: taoism4504 <loann@hashicorp.com>
* updated usage example
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
Co-authored-by: Mehdi Ahmadi <aphorise@gmail.com>
* Allow automatic rebuilding of CRLs
When enabled, periodic rebuilding of CRLs will improve PKI mounts in two
way:
1. Reduced load during periods of high (new) revocations, as the CRL
isn't rebuilt after each revocation but instead on a fixed schedule.
2. Ensuring the CRL is never stale as long as the cluster remains up,
by checking for next CRL expiry and regenerating CRLs before that
happens. This may increase cluster load when operators have large
CRLs that they'd prefer to let go stale, rather than regenerating
fresh copies.
In particular, we set a grace period before expiration of CRLs where,
when the periodic function triggers (about once a minute), we check
upcoming CRL expirations and check if we need to rebuild the CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on periodic rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow modification of rollback period for testing
When testing backends that use the periodic func, and specifically,
testing the behavior of that periodic func, waiting for the usual 1m
interval can lead to excessively long test execution. By switching to a
shorter period--strictly for testing--we can make these tests execute
faster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-rebuilding of CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove non-updating getConfig variant
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Avoid double reload of config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor existing CRL function to storage getRevocationConfig
* Introduce ocsp_disable config option in config/crl
* Introduce OCSPSigning usage flag on issuer
* Add ocsp-request passthrough within lower layers of Vault
* Add OCSP responder to Vault PKI
* Add API documentation for OCSP
* Add cl
* Revert PKI storage migration modifications for OCSP
* Smaller PR feedback items
- pki.mdx doc update
- parens around logical.go comment to indicate DER encoded request is
related to OCSP and not the snapshots
- Use AllIssuers instead of writing them all out
- Drop zero initialization of crl config's Disable flag if not present
- Upgrade issuer on the fly instead of an initial migration
* Additional clean up backing out the writeRevocationConfig refactoring
* Remove Dirty issuer flag and update comment about not writing upgrade to
storage
* Address PR feedback and return Unknown response when mismatching issuer
* make fmt
* PR Feedback.
* More PR feedback
- Leverage ocsp response constant
- Remove duplicate errors regarding unknown issuers
* Add per-issuer AIA URI information
Per discussion on GitHub with @maxb, this allows issuers to have their
own copy of AIA URIs. Because each issuer has its own URLs (for CA and
CRL access), its necessary to mint their issued certs pointing to the
correct issuer and not to the global default issuer. For anyone using
multiple issuers within a mount, this change allows the issuer to point
back to itself via leaf's AIA info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on per-issuer AIA info
Also add it to the considerations page as something to watch out for.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for per-issuer AIA information
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor AIA setting on the issuer
This introduces a common helper per Steve's suggestion.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages w.r.t. AIA naming
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages regarding AIA URLs
This clarifies which request parameter the invalid URL is contained
in, disambiguating the sometimes ambiguous usage of AIA, per suggestion
by Max.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename getURLs -> getGlobalAIAURLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correct AIA acronym expansion word orders
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bad comment suggesting re-generating roots
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add two entries to URL tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow marking issuers as revoked
This allows PKI's issuers to be considered revoked and appear on each
others' CRLs. We disable issuance (via removing the usage) and prohibit
modifying the usage via the regular issuer management interface.
A separate endpoint is necessary because issuers (especially if signed
by a third-party CA using incremental serial numbers) might share a
serial number (e.g., an intermediate under cross-signing might share the
same number as an external root or an unrelated intermediate).
When the next CRL rebuild happens, this issuer will then appear on
others issuers CRLs, if they validate this issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on revoking issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer revocation semantics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Notate that CRLs will be rebuilt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix timestamp field from _utc -> to _rfc3339
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serial-based accesses shows as revoked
Thanks Kit!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking default issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update the Vault Agent config example
* Update index.mdx
* Update the Vault Agent config example - edit
Small additions.
* Update the Vault Agent config example - edit2
Added IP note too.
* Minor fix: add missing 'Vault'
Co-authored-by: aphorise <aphorise@gmail.com>
* impr(ssh): fix bug with allowed_users_template and add allowed_domains_template field in SSH role configuration, closes#10943
* chore: add changelog entry
Helm 3 support was added in OpenShift 4.3 [1]. So, we might support 4.X but if we require Helm 3 then we need to start at 4.3. Just didn't want someone to try 4.0-4.2 and wonder why it wasn't working because Helm 3 isn't supported.
[1] https://www.openshift.com/blog/openshift-4-3-deploy-applications-with-helm-3
* Allow Proof of Possession based revocation
Revocation by proof of possession ensures that we have a private key
matching the (provided or stored) certificate. This allows callers to
revoke certificate they own (as proven by holding the corresponding
private key), without having an admin create innumerable ACLs around
the serial_number parameter for every issuance/user.
We base this on Go TLS stack's verification of certificate<->key
matching, but extend it where applicable to ensure curves match, the
private key is indeed valid, and has the same structure as the
corresponding public key from the certificate.
This endpoint currently is authenticated, allowing operators to disable
the endpoint if it isn't desirable to use, via ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on ParseDERKey
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Leave revoke-with-key authenticated
After some discussion, given the potential for DoS (via submitting a lot
of keys/certs to validate, including invalid pairs), it seems best to
leave this as an authenticated endpoint. Presently in Vault, there's no
way to have an authenticated-but-unauthorized path (i.e., one which
bypasses ACL controls), so it is recommended (but not enforced) to make
this endpoint generally available by permissive ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API documentation on PoP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add acceptance tests for Proof of Possession
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exercise negative cases in PoP tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor serial creation to common helper
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add BYOC revocation to PKI mount
This allows operators to revoke certificates via a PEM blob passed to
Vault. In particular, Vault verifies the signature on the certificate
from an existing issuer within the mount, ensuring that one indeed
issued this certificate. The certificate is then added to storage and
its serial submitted for revocation.
This allows certificates generated with no_store=true to be submitted
for revocation afterwards, given a full copy of the certificate. As a
consequence, all roles can now safely move to no_store=true (if desired
for performance) and revocation can be done on a case-by-case basis.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on BYOC revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PEM length check to BYOC import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for BYOC
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Guard against legacy CA bundle usage
This prevents usage of the BYOC cert on a hybrid 1.10/1.12 cluster with
an non-upgraded CA issuer bundle.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update internal-ui-mounts.mdx
For sys/internal/ui/mounts:
Make it clear that this endpoint is not only being leveraged on the Web UI, but is also leveraged in other places such as `command/kv_helpers.go` for example. Also update response to standard Vault API response JSON, not just `data` portion of response, and include options data present on KV v2 mounts.
For sys/internal/ui/mounts/:path:
Add initial version of this endpoint family.
* docs(website/content/api-docs/system/internal): backwards compatibility disclaimer
* realign MD table
* restrict response sample to data portion to be in line with other docs
* docs(website/content/api-docs/system/internal): ui/mounts calling mode notes
* Update health.mdx
Added sample request and response for customizing the status code being returned from the sys/health endpoint
* Update website/content/api-docs/system/health.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* add key wrapping guide for transit import
* link to key wrap guide from transit overview
* add new page to nav
* fix formatting
* fix note format
* fix link
* Add PSS signature support to Vault PKI engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use issuer's RevocationSigAlg for CRL signing
We introduce a new parameter on issuers, revocation_signature_algorithm
to control the signature algorithm used during CRL signing. This is
because the SignatureAlgorithm value from the certificate itself is
incorrect for this purpose: a RSA root could sign an ECDSA intermediate
with say, SHA256WithRSA, but when the intermediate goes to sign a CRL,
it must use ECDSAWithSHA256 or equivalent instead of SHA256WithRSA. When
coupled with support for PSS-only keys, allowing the user to set the
signature algorithm value as desired seems like the best approach.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add use_pss, revocation_signature_algorithm docs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PSS to signature role issuance test matrix
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow roots to self-identify revocation alg
When using PSS support with a managed key, sometimes the underlying
device will not support PKCS#1v1.5 signatures. This results in CRL
building failing, unless we update the entry's signature algorithm
prior to building the CRL for the new root.
With a RSA-type key and use_pss=true, we use the signature bits value to
decide which hash function to use for PSS support.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add clearer error message on failed import
When CRL building fails during cert/key import, due to PSS failures,
give a better indication to the user that import succeeded its just CRL
building that failed. This tells them the parameter to adjust on the
issuer and warns that CRL building will fail until this is fixed.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add case insensitive SigAlgo matching
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Convert UsePSS back to regular bool
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor PSS->certTemplate into helper function
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Proper string output on rev_sig_alg display
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Copy root's SignatureAlgorithm for CRL building
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow old certs to be cross-signed
In Vault 1.11, we introduced cross-signing support, but the earlier SKID
field change in Vault 1.10 causes problems: notably, certs created on
older versions of Vault (<=1.9) or outside of Vault (with a different
SKID method) cannot be cross-signed and validated in OpenSSL.
In particular, OpenSSL appears to be unique in requiring a SKID/AKID
match for chain building. If AKID and SKID are present on an otherwise
valid client/parent cert pair and the values are different, OpenSSL will
not build a valid path over those two, whereas most other chain
validation implementations will.
Regardless, to have proper cross-signing support, we really aught to
support copying an SKID. This adds such support to the sign-intermediate
endpoint. Support for the /issue endpoint is not added, as cross-signing
leaf certs isn't generally useful and can accept random SKIDs.
Resolves: #16461
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback, fix tests
Also adds a known-answer test using LE R3 CA's SKID.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback regarding separators
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move the IS Autopilot note from 1.11 upgrade guide
* Minor update to the verbiage
* Update website/content/docs/upgrading/index.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/upgrading/index.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Remove extra spaces
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* VAULT-6615 Update docs for 1.12 quota changes
* VAULT-6615 Add info about globbing
* VAULT-6615 some small updates for role param
* Update website/content/docs/enterprise/lease-count-quotas.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/api-docs/system/lease-count-quotas.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
