Noticed that `detected drivers` log line was misleading - when a driver
doesn't fingerprint before timeout, their health status is empty string
`""` which we would mark as detected.
Now, we log all drivers along with their state to ease driver
fingerprint debugging.
I noticed that `watchNodeUpdates()` almost immediately after
`registerAndHeartbeat()` calls `retryRegisterNode()`, well after 5
seconds.
This call is unnecessary and made debugging a bit harder. So here, we
ensure that we only re-register node for new node events, not for
initial registration.
Here we retain 0.8.7 behavior of waiting for driver fingerprints before
registering a node, with some timeout. This is needed for system jobs,
as system job scheduling for node occur at node registration, and the
race might mean that a system job may not get placed on the node because
of missing drivers.
The timeout isn't strictly necessary, but raising it to 1 minute as it's
closer to indefinitely blocked than 1 second. We need to keep the value
high enough to capture as much drivers/devices, but low enough that
doesn't risk blocking too long due to misbehaving plugin.
Fixes https://github.com/hashicorp/nomad/issues/5579
Currently, when logmon fails to reattach, we will retry reattachment to
the same pid until the task restart specification is exhausted.
Because we cannot clear hook state during error conditions, it is not
possible for us to signal to a future restart that it _shouldn't_
attempt to reattach to the plugin.
Here we revert to explicitly detecting reattachment seperately from a
launch of a new logmon, so we can recover from scenarios where a logmon
plugin has failed.
This is a net improvement over the current hard failure situation, as it
means in the most common case (the pid has gone away), we can recover.
Other reattachment failure modes where the plugin may still be running
could potentially cause a duplicate process, or a subsequent failure to launch
a new plugin.
If there was a duplicate process, it could potentially cause duplicate
logging. This is better than a production workload outage.
If there was a subsequent failure to launch a new plugin, it would fail
in the same (retry until restarts are exhausted) as the current failure
mode.
Renewal time was being calculated as 10s+Intn(lease-10s), so the renewal
time could be very rapid or within 1s of the deadline: [10s, lease)
This commit fixes the renewal time by calculating it as:
(lease/2) +/- 10s
For a lease of 60s this means the renewal will occur in [20s, 40s).
Revert "fingerprint Constraints and Affinities have Equals, as set"
This reverts commit 596f16fb5f1a4a6766a57b3311af806d22382609.
Revert "client tests assert the independent handling of interface and speed"
This reverts commit 7857ac5993a578474d0570819f99b7b6e027de40.
Revert "structs missed applying a style change from the review"
This reverts commit 658916e3274efa438beadc2535f47109d0c2f0f2.
Revert "client, structs comments"
This reverts commit be2838d6baa9d382a5013fa80ea016856f28ade2.
Revert "client fingerprint updateNetworks preserves the network configuration"
This reverts commit fc309cb430e62d8e66267a724f006ae9abe1c63c.
Revert "client_test cleanup comments from review"
This reverts commit bc0bf4efb9114e699bc662f50c8f12319b6b3445.
Revert "client Networks Equals is set equality"
This reverts commit f8d432345b54b1953a4a4c719b9269f845e3e573.
Revert "struct cleanup indentation in RequestedDevice Equals"
This reverts commit f4746411cab328215def6508955b160a53452da3.
Revert "struct Equals checks for identity before value checking"
This reverts commit 0767a4665ed30ab8d9586a59a74db75d51fd9226.
Revert "fix client-test, avoid hardwired platform dependecy on lo0"
This reverts commit e89dbb2ab182b6368507dbcd33c3342223eb0ae7.
Revert "refactor error in client fingerprint to include the offending data"
This reverts commit a7fed726c6e0264d42a58410d840adde780a30f5.
Revert "add client updateNodeResources to merge but preserve manual config"
This reverts commit 84bd433c7e1d030193e054ec23474380ff3b9032.
Revert "refactor struts.RequestedDevice to have its own Equals"
This reverts commit 689782524090e51183474516715aa2f34908b8e6.
Revert "refactor structs.Resource.Networks to have its own Equals"
This reverts commit 49e2e6c77bb3eaa4577772b36c62205061c92fa1.
Revert "refactor structs.Resource.Devices to have its own Equals"
This reverts commit 4ede9226bb971ae42cc203560ed0029897aec2c9.
Revert "add COMPAT(0.10): Remove in 0.10 notes to impl for structs.Resources"
This reverts commit 49fbaace5298d5ccf031eb7ebec93906e1d468b5.
Revert "add structs.Resources Equals"
This reverts commit 8528a2a2a6450e4462a1d02741571b5efcb45f0b.
Revert "test that fingerprint resources are updated, net not clobbered"
This reverts commit 8ee02ddd23bafc87b9fce52b60c6026335bb722d.
This adds a `nomad alloc restart` command and api that allows a job operator
with the alloc-lifecycle acl to perform an in-place restart of a Nomad
allocation, or a given subtask.
Remove runLaunched tracking as Run is *always* called for killable
TaskRunners. TaskRunners which fail before Run can be called (during
NewTaskRunner or Restore) are not killable as they're never added to the
client's alloc map.
This PR switches to using plain fifo files instead of golang structs
managed by containerd/fifo library.
The library main benefit is management of opening fifo files. In Linux,
a reader `open()` request would block until a writer opens the file (and
vice-versa). The library uses goroutines so that it's the first IO
operation that blocks.
This benefit isn't really useful for us: Given that logmon simply
streams output in a separate process, blocking of opening or first read
is effectively the same.
The library additionally makes further complications for managing state
and tracking read/write permission that seems overhead for our use,
compared to using a file directly.
Looking here, I made the following incidental changes:
* document that we do handle if fifo files are already created, as we
rely on that behavior for logmon restarts
* use type system to lock read vs write: currently, fifo library returns
`io.ReadWriteCloser` even if fifo is opened for writing only!
I chose to make them more of integration tests since there's a lot more
plumbing involved. The internal implementation details of how we craft
task envs can now change and these tests will still properly assert the
task runtime environment is setup properly.
Noticed that the protobuf files are out of sync with ones generated by 1.2.0 protoc go plugin.
The cause for these files seem to be related to release processes, e.g. [0.9.0-beta1 preperation](ecec3d38de (diff-da4da188ee496377d456025c2eab4e87)), and [0.9.0-beta3 preperation](b849d84f2f).
This restores the changes to that of the pinned protoc version and fails build if protobuf files are out of sync. Sample failing Travis job is that of the first commit change: https://travis-ci.org/hashicorp/nomad/jobs/506285085
Some of the context uses in TR hooks are useless (Killed during Stop
never seems meaningful).
None of the hooks are interruptable for graceful shutdown which is
unfortunate and probably needs fixing.
Builds upon earlier commit that cleans up restored handles of terminal
allocs by also emitting terminated events and calling exited hooks when
appropriate.
The test is sadly quite complicated and peeks into things (logmon's
reattach config) AR doesn't normally have access to.
However, I couldn't find another way of asserting logmon got cleaned up
without resorting to smaller unit tests. Smaller unit tests risk
re-implementing dependencies in an unrealistic way, so I opted for an
ugly integration test.
This commit is a significant change. TR.Run is now always executed, even
for terminal allocations. This was changed to allow TR.Run to cleanup
(run stop hooks) if a handle was recovered.
This is intended to handle the case of Nomad receiving a
DesiredStatus=Stop allocation update, persisting it, but crashing before
stopping AR/TR.
The commit also renames task runner hook data as it was very easy to
accidently set state on Requests instead of Responses using the old
field names.
Port some integration tests of driver fingerprinting.
Some tests (e.g. `TestFingerprintManager_Run_DriversInBlacklist`) have
been subsituted by more isolated tests in
`client/pluginmanager/drivermanager/manager_test.go`
This code chooses to be conservative as opposed to optimal: when failing
to reattach to logmon simply return a recoverable error instead of
immediately trying to restart logmon.
The recoverable error will cause the task's restart policy to be
applied and a new logmon will be launched upon restart.
Trying to do the optimal approach of simply starting a new logmon
requires error string comparison and should be tested against a task
actively logging to assert the behavior (are writes blocked? dropped?).
There were multiple bugs here:
1. Reattach unmarshalling always returned an error because you can't
unmarshal into a nil pointer.
2. The hook data wasn't being saved because it was put on the request
struct, not the response struct.
3. The plugin configuration should only have reattach *or* a command
set. Not both.
4. Setting Done=true meant the hook was never re-run on agent restart so
reattaching was never attempted.
Track the download status of each artifact independently so that if only
one of many artifacts fails to download, completed artifacts aren't
downloaded again.
0.9.0beta2 contains a regression where artifact download errors would
not cause a task restart and instead immediately fail the task.
This restores the pre-0.9 behavior of retrying all artifact errors and
adds missing tests.
Fixes an issue where if a task was restarted after restating the client,
the task dir environment variables would not be populated. This PR fixes
this for both upgrades from 0.8.X and for normal 0.9 restarts.
* master: (23 commits)
tests: avoid assertion in goroutine
spell check
ci: run checkscripts
tests: deflake TestRktDriver_StartWaitRecoverWaitStop
drivers/rkt: Remove unused github.com/rkt/rkt
drivers/rkt: allow development on non-linux
cli: Hide `nomad docker_logger` from help output
api: test api and structs are in sync
goimports until make check is happy
nil check node resources to prevent panic
tr: use context in as select statement
move pluginutils -> helper/pluginutils
vet
goimports
gofmt
Split hclspec
move hclutils
Driver tests do not use hcl2/hcl, hclspec, or hclutils
move reattach config
loader and singleton
...
Added ability to adjust the number of events the TaskRunner keeps as
there's no way to observe all events otherwise.
Task events differ slightly from 0.8 because 0.9 emits Terminated every
time a task exits instead of only when it exits on its own (not due to
restart or kill).
0.9 does not emit Killing/Killed for restarts like 0.8 which seems fine
as `Restart Signaled/Terminated/Restarting` is more descriptive.
Original v0.8 events emitted:
```
expected := []string{
"Received",
"Task Setup",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Restarting",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Restarting",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Not Restarting",
}
```
