* build: update to go1.21
* go: eliminate helpers in favor of min/max
* build: run go mod tidy
* build: swap depguard for semgrep
* command: fixup broken tls error check on go1.21
Add a new job admission hook for node pools that enforces the pool exists on
registration. Also provide the skeleton function we need for Enterprise
enforcement functions we'll implement later.
The job scale RPC endpoint hard-coded the eval creation to use the
type of service. This meant scaling events triggered on jobs of
type batch would create evaluations with the wrong type, which
does not seem to cause any problems, just confusion when
correlating the two.
* api: enable support for setting original source alongside job
This PR adds support for setting job source material along with
the registration of a job.
This includes a new HTTP endpoint and a new RPC endpoint for
making queries for the original source of a job. The
HTTP endpoint is /v1/job/<id>/submission?version=<version> and
the RPC method is Job.GetJobSubmission.
The job source (if submitted, and doing so is always optional), is
stored in the job_submission memdb table, separately from the
actual job. This way we do not incur overhead of reading the large
string field throughout normal job operations.
The server config now includes job_max_source_size for configuring
the maximum size the job source may be, before the server simply
drops the source material. This should help prevent Bad Things from
happening when huge jobs are submitted. If the value is set to 0,
all job source material will be dropped.
* api: avoid writing var content to disk for parsing
* api: move submission validation into RPC layer
* api: return an error if updating a job submission without namespace or job id
* api: be exact about the job index we associate a submission with (modify)
* api: reword api docs scheduling
* api: prune all but the last 6 job submissions
* api: protect against nil job submission in job validation
* api: set max job source size in test server
* api: fixups from pr
The job evaluate endpoint creates a new evaluation for the job which is
a write operation. This change modifies the necessary capability from
`read-job` to `submit-job` to better reflect this.
In Nomad 0.12.1 we introduced atomic job registration/deregistration, where the
new eval was written in the same raft entry. Backwards-compatibility checks were
supposed to have been removed in Nomad 1.1.0, but we missed that. This is long
safe to remove.
The signature of the `raftApply` function requires that the caller unwrap the
first returned value (the response from `FSM.Apply`) to see if it's an
error. This puts the burden on the caller to remember to check two different
places for errors, and we've done so inconsistently.
Update `raftApply` to do the unwrapping for us and return any `FSM.Apply` error
as the error value. Similar work was done in Consul in
https://github.com/hashicorp/consul/pull/9991. This eliminates some boilerplate
and surfaces a few minor bugs in the process:
* job deregistrations of already-GC'd jobs were still emitting evals
* reconcile job summaries does not return scheduler errors
* node updates did not report errors associated with inconsistent service
discovery or CSI plugin states
Note that although _most_ of the `FSM.Apply` functions return only errors (which
makes it tempting to remove the first return value entirely), there are few that
return `bool` for some reason and Variables relies on the response value for
proper CAS checking.
* Warn when Items key isn't directly accessible
Go template requires that map keys are alphanumeric for direct access
using the dotted reference syntax. This warns users when they create
keys that run afoul of this requirement.
- cli: use regex to detect invalid indentifiers in var keys
- test: fix slash in escape test case
- api: share warning formatting function between API and CLI
- ui: warn if var key has characters other than _, letter, or number
---------
Co-authored-by: Charlie Voiselle <464492+angrycub@users.noreply.github.com>
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
This changeset configures the RPC rate metrics that were added in #15515 to all
the RPCs that support authenticated HTTP API requests. These endpoints already
configured with pre-forwarding authentication in #15870, and a handful of others
were done already as part of the proof-of-concept work. So this changeset is
entirely copy-and-pasting one method call into a whole mess of handlers.
Upcoming PRs will wire up pre-forwarding auth and rate metrics for the remaining
set of RPCs that have no API consumers or aren't authenticated, in smaller
chunks that can be more thoughtfully reviewed.
This changeset allows Workload Identities to authenticate to all the RPCs that
support HTTP API endpoints, for use with PR #15864.
* Extends the work done for pre-forwarding authentication to all RPCs that
support a HTTP API endpoint.
* Consolidates the auth helpers used by the CSI, Service Registration, and Node
endpoints that are currently used to support both tokens and client secrets.
Intentionally excluded from this changeset:
* The Variables endpoint still has custom handling because of the implicit
policies. Ideally we'll figure out an efficient way to resolve those into real
policies and then we can get rid of that custom handling.
* The RPCs that don't currently support auth tokens (i.e. those that don't
support HTTP endpoints) have not been updated with the new pre-forwarding auth
We'll be doing this under a separate PR to support RPC rate metrics.
Upcoming work to instrument the rate of RPC requests by consumer (and eventually
rate limit) requires that we thread the `RPCContext` through all RPC
handlers so that we can access the underlying connection. This changeset adds
the context to everywhere we intend to initially support it and intentionally
excludes streaming RPCs and client RPCs.
To improve the ergonomics of adding the context everywhere its needed and to
clarify the requirements of dynamic vs static handlers, I've also done a good
bit of refactoring here:
* canonicalized the RPC handler fields so they're as close to identical as
possible without introducing unused fields (i.e. I didn't add loggers if the
handler doesn't use them already).
* canonicalized the imports in the handler files.
* added a `NewExampleEndpoint` function for each handler that ensures we're
constructing the handlers with the required arguments.
* reordered the registration in server.go to match the order of the files (to
make it easier to see if we've missed one), and added a bunch of commentary
there as to what the difference between static and dynamic handlers is.
* scheduler: create placements for non-register MRD
For multiregion jobs, the scheduler does not create placements on
registration because the deployment must wait for the other regions.
Once of these regions will then trigger the deployment to run.
Currently, this is done in the scheduler by considering any eval for a
multiregion job as "paused" since it's expected that another region will
eventually unpause it.
This becomes a problem where evals not triggered by a job registration
happen, such as on a node update. These types of regional changes do not
have other regions waiting to progress the deployment, and so they were
never resulting in placements.
The fix is to create a deployment at job registration time. This
additional piece of state allows the scheduler to differentiate between
a multiregion change, where there are other regions engaged in the
deployment so no placements are required, from a regional change, where
the scheduler does need to create placements.
This deployment starts in the new "initializing" status to signal to the
scheduler that it needs to compute the initial deployment state. The
multiregion deployment will wait until this deployment state is
persisted and its starts is set to "pending". Without this state
transition it's possible to hit a race condition where the plan applier
and the deployment watcher may step of each other and overwrite their
changes.
* changelog: add entry for #15325
* Adds meta to job list stub and displays a pack logo on the jobs index
* Changelog
* Modifying struct for optional meta param
* Explicitly ask for meta anytime I look up a job from index or job page
* Test case for the endpoint
* adding meta field to API struct and ommitting from response if empty
* passthru method added to api/jobs.list
* Meta param listed in docs for jobs list
* Update api/jobs.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* One-time tokens are not replicated between regions, so we don't want to enforce
that the version check across all of serf, just members in the same region.
* Scheduler: Disconnected clients handling is specific to a single region, so we
don't want to enforce that the version check across all of serf, just members in
the same region.
* Variables: enforce version check in Apply RPC
* Cleans up a bunch of legacy checks.
This changeset is specific to 1.4.x and the changes for previous versions of
Nomad will be manually backported in a separate PR.
* cleanup: refactor MapStringStringSliceValueSet to be cleaner
* cleanup: replace SliceStringToSet with actual set
* cleanup: replace SliceStringSubset with real set
* cleanup: replace SliceStringContains with slices.Contains
* cleanup: remove unused function SliceStringHasPrefix
* cleanup: fixup StringHasPrefixInSlice doc string
* cleanup: refactor SliceSetDisjoint to use real set
* cleanup: replace CompareSliceSetString with SliceSetEq
* cleanup: replace CompareMapStringString with maps.Equal
* cleanup: replace CopyMapStringString with CopyMap
* cleanup: replace CopyMapStringInterface with CopyMap
* cleanup: fixup more CopyMapStringString and CopyMapStringInt
* cleanup: replace CopySliceString with slices.Clone
* cleanup: remove unused CopySliceInt
* cleanup: refactor CopyMapStringSliceString to be generic as CopyMapOfSlice
* cleanup: replace CopyMap with maps.Clone
* cleanup: run go mod tidy
Since the state store returns a pointer to the shared job structs in
memdb we must always copy it before mutating it and applying the new
version via raft. Otherwise if the rpc fails before the mutated job is
committed to raft (either due to validation, bug, crash, or other exit
condition), the leader server will have an updated copy of the job that
other servers will not have.
This PR changes the behavior of 'nomad job validate' to forward the
request to the nomad leader, rather than responding from any server.
This is because we need the leader when validating Vault tokens, since
the leader is the only server with an active vault client.
api: apply new ACL check for wildcard namespace
In #13606 the ACL check was refactored to better support the all
namespaces wildcard (`*`). This commit applies the changes to the jobs
and alloc list endpoints.
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
The `Job.List` RPC attaches a `JobSummary` to each job stub. We're
using the request namespace and not the job namespace for that query,
which results in a nil `JobSummary` whenever we pass the wildcard
namespace. This is incorrect and causes panics in downstream consumers
like the CLI, which assume the `JobSummary` is non-nil as an unstate
invariant.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
Previously when creating an eval for job deregistration, the eval
priority was set to the default value irregardless of the job
priority. In situations where an operator would want to deregister
a high priority job so they could re-register; the evaluation may
get blocked for some time on a busy cluster because of the
deregsiter priority.
If a job had a lower than default priority and was deregistered,
the deregister eval would get a priority higher than that of the
job. If we attempted to register another job with a higher
priority than this, but still below the default, the deregister
would be actioned before the register.
Both situations described above seem incorrect and unexpected from
a user prespective.
This fix modifies to behaviour to set the deregister eval priority
to that of the job, if available. Otherwise the default value is
still used.
hc-github-team-nomad-core