Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
Fixes#13505
This fixes#13505 by treating reserved_ports like we treat a lot of jobspec settings: merging settings from more global stanzas (client.reserved.reserved_ports) "down" into more specific stanzas (client.host_networks[].reserved_ports).
As discussed in #13505 there are other options, and since it's totally broken right now we have some flexibility:
Treat overlapping reserved_ports on addresses as invalid and refuse to start agents. However, I'm not sure there's a cohesive model we want to publish right now since so much 0.9-0.12 compat code still exists! We would have to explain to folks that if their -network-interface and host_network addresses overlapped, they could only specify reserved_ports in one place or the other?! It gets ugly.
Use the global client.reserved.reserved_ports value as the default and treat host_network[].reserverd_ports as overrides. My first suggestion in the issue, but @groggemans made me realize the addresses on the agent's interface (as configured by -network-interface) may overlap with host_networks, so you'd need to remove the global reserved_ports from addresses shared with a shared network?! This seemed really confusing and subtle for users to me.
So I think "merging down" creates the most expressive yet understandable approach. I've played around with it a bit, and it doesn't seem too surprising. The only frustrating part is how difficult it is to observe the available addresses and ports on a node! However that's a job for another PR.
In OSS we can upsert an allocation without worrying about whether that
alloc is in a namespace that actually exists, but in ENT that upsert
will add to the namespace's quotas. Ensure we're doing so in this
secure variables RPC test to fix the test breaking in the ENT repo.
* Failing test and TODO for wildcard
* Alias the namespace query parameter for Evals
* eval: fix list when using ACLs and * namespace
Apply the same verification process as in job, allocs and scaling
policy list endpoints to handle the eval list when using an ACL token
with limited namespace support but querying using the `*` wildcard
namespace.
* changelog: add entry for #13530
* ui: set namespace when querying eval
Evals have a unique UUID as ID, but when querying them the Nomad API
still expects a namespace query param, otherwise it assumes `default`.
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
The sidebar navigation tree for the `operator` sub-sub commands is
getting cluttered and we have a new set of commands coming to support
secure variables keyring as well. Move these all under their own
subtrees.
When the `Full` flag is passed for key rotation, we kick off a core
job to decrypt and re-encrypt all the secure variables so that they
use the new key.
* Related entities scaffolded
* Added hint on edit
* Re-classic'd
* Dont create entities when path goes beyond task level
* only show the related entities hint for new vars, not edited ones
* Unit tests for pathLinkedEntities
* Acceptance tests for linked entities
* Add hint on creation
* Will be vs Is on @new boolean flag
* Link styles and namespaces on links
* Unused component class
* Delog
* Defensive shouldShowLinked
* Properly instantiating the accessibilty check test
* Toying with insert and update helpers before translation func
* Working prototype that lets you switch between json and tabular
* No longer add the bonus items row in json mode
* Trimmed the ivy from the codemirror (#13503)
* Trimmed the ivy from the codemirror
* editedJSONItems removal
* De-debugger
* Replaced other instances of IvyCodeMirror throughout the app (#13528)
* Replaced other instances of IvyCodeMirror throughout the app
* PR requests for codemirror modifier
* Screen reader setting as param
* Trying a simpler codemirror test helper
* Lint removal
* Screen Reader Label added for a11y
* JSONViewer cleanup
* JSON editor added to /new and all variables stringified before save or translate
* Give users a foothold when editing an empty item in JSON mode
* Copy the empty KV
* No duplicate keys in KV
* Better handling of cursor snapping in json edit field
* Catch formatting errors on the fly
* Basic tests for JSON to Table and Table to JSON in form
* SV: CAS
* Implement Check and Set for Delete and Upsert
* Reading the conflict from the state store
* Update endpoint for new error text
* Updated HTTP api tests
* Conflicts to the HTTP api
* SV: structs: Update SV time to UnixNanos
* update mock to UnixNano; refactor
* SV: encrypter: quote KeyID in error
* SV: mock: add mock for namespace w/ SV
We need to track per-namespace storage usage for secure variables even
in Nomad OSS so that a cluster can be seamlessly upgraded from OSS to
ENT without having to re-calculate quota usage.
Provide a hook in the upsert RPC for enforcement of quotas in
ENT. This will be a no-op in Nomad OSS.
This changeset includes some additional unit tests for secure
variables ACL policies, so that we have explicit coverage of edge
cases we're discussing with the UI folks.
* JSON view init
* Overeager config history reverted
* Set as query parameter
* border added to copy button
* More robust stringifyObject helper
* Testing for stringify-object helper
* Error thrown if you have no KVs on save
* Acceptance tests for flash messages and no-key-value adds
* Post-hoc accounting for new variable path routing
* Trim on key before validating it as existing
Extend the GC job to support periodic key rotation.
Update the GC process to safely support signed workload identity. We
can't GC any key used to sign a workload identity. Finding which key
was used to sign every allocation will be expensive, but there are not
that many keys. This lets us take a conservative approach: find the
oldest live allocation and ensure that we don't GC any key older than
that key.
Move all the gossip keyring and key generation commands under
`operator gossip keyring` subcommands to align with the new `operator
secure-variables keyring` subcommands. Deprecate the `operator keyring`
and `operator keygen` commands.
The blocking query for `Keyring.List` appended the keys for each pass
through the blocking query to the response. This results in mulitple
copies of keys in the response. Overwrite the `reply.Keys` field on
each pass through the blocking query to ensure we only get the
expected page of responses.
Adds a new policy block inside namespaces to control access to secure
variables on the basis of path, with support for globbing.
Splits out VerifyClaim from ResolveClaim.
The ServiceRegistration RPC only needs to be able to verify that a
claim is valid for some allocation in the store; it doesn't care about
implicit policies or capabilities. Split this out to its own method on
the server so that the SecureVariables RPC can reuse it as a separate
step from resolving policies (see next commit).
Support implicit policies based on workload identity
The `Encrypt` method generates an appropriately-sized nonce and uses
that buffer as the prefix for the ciphertext. This keeps the
ciphertext and nonce together for decryption, and reuses the buffer as
much as possible without presenting the temptation to reuse the
cleartext buffer owned by the caller.
We include the key ID as the "additional data" field that's used as an
extra input to the authentication signature, to provide additional
protection that a ciphertext originated with that key.
Refactors the locking for the keyring so that the public methods are
generally (with one commented exception) responsible for taking the
lock and then inner methods are assumed locked.
* Add Path only index for SecureVariables
* Add GetSecureVariablesByPrefix; refactor tests
* Add search for SecureVariables
* Add prefix search for secure variables
* ui: update component api to accept callback fns to be fired on cancel/prompt
* refact: cancel callback should fire with outside click handler not on idle
* refact: rename action to be more specific
* toast style notification init
* Notificatino styles and messaging for variable save
* pre-PR cleanup
* Typo fix and 5sec timeout
* Prevent text from overlapping the close button
* Bones of a just-in-time compaction pathTree
* wooo got compaction going in sub-ms times
* PR cleanup
* Path compaction tests
* lint fix to equal instead of .ok()
* Name prop specifically being equality checked
This PR splits SecureVariable into SecureVariableDecrypted and
SecureVariableEncrypted in order to use the type system to help
verify that cleartext secret material is not committed to file.
* Make Encrypt function return KeyID
* Split SecureVariable
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Split the flag options for the `secure-variables keyring` into their
own subcommands. The gossip keyring CLI will be similarly refactored
and the old version will be deprecated.
* variable index header and deletion hook
* Some visual improvements to edit header and back button
* Mirage fixtures for variables
* Deletion flow test
* Account for disabled state of add-more button
* Transition destination changes after design chat
* Simplified parent folder path by adding to variable model
* Lint cleanup
* test update to reflect path redirect on delete
* No longer have to re-traverse to a deleted var folder after deletion, tests updated
In order to support implicit ACL policies for tasks to get their own
secrets, each task would need to have its own ACL token. This would
add extra raft overhead as well as new garbage collection jobs for
cleaning up task-specific ACL tokens. Instead, Nomad will create a
workload Identity Claim for each task.
An Identity Claim is a JSON Web Token (JWT) signed by the server’s
private key and attached to an Allocation at the time a plan is
applied. The encoded JWT can be submitted as the X-Nomad-Token header
to replace ACL token secret IDs for the RPCs that support identity
claims.
Whenever a key is is added to a server’s keyring, it will use the key
as the seed for a Ed25519 public-private private keypair. That keypair
will be used for signing the JWT and for verifying the JWT.
This implementation is a ruthlessly minimal approach to support the
secure variables feature. When a JWT is verified, the allocation ID
will be checked against the Nomad state store, and non-existent or
terminal allocation IDs will cause the validation to be rejected. This
is sufficient to support the secure variables feature at launch
without requiring implementation of a background process to renew
soon-to-expire tokens.
* Notify a user if they try to make a variable with an existing path
* Stylize error fade
* Bugfix: if you click the dupe link to a variable you havent previously loaded, you lack its keyvalues
* rename and typefix for duplicate path warning
dependabot[bot]