* nomad/state/state_store: error message copy/paste error
* nomad/structs/structs: add a VolumeEval to the JobDeregisterResponse
* nomad/job_endpoint: synchronously, volumeClaimReap on job Deregister
* nomad/core_sched: make volumeClaimReap available without a CoreSched
* nomad/job_endpoint: Deregister return early if the job is missing
* nomad/job_endpoint_test: job Deregistion is idempotent
* nomad/core_sched: conditionally ignore alloc status in volumeClaimReap
* nomad/job_endpoint: volumeClaimReap all allocations, even running
* nomad/core_sched_test: extra argument to collectClaimsToGCImpl
* nomad/job_endpoint: job deregistration is not idempotent
I hypothesize that the flakiness in rolling update is due to shutting
down s3 server before s4 is properly added as a voter.
The chain of the flakiness is as follows:
1. Bootstrap with s1, s2, s3
2. Add s4
3. Wait for servers to register with 3 voting peers
* But we already have 3 voters (s1, s2, and s3)
* s4 is added as a non-voter in Raft v3 and must wait until autopilot promots it
4. Test proceeds without s4 being a voter
5. s3 shutdown
6. cluster changes stall due to leader election and too many pending configuration
changes (e.g. removing s3 from raft, promoting s4).
Here, I have the test wait until s4 is marked as a voter before shutting
down s3, so we don't have too many configuration changes at once.
In https://circleci.com/gh/hashicorp/nomad/57092, I noticed the
following events:
```
TestAutopilot_RollingUpdate: autopilot_test.go:204: adding server s4
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.789Z [INFO] nomad/serf.go:60: nomad: adding server: server="nomad-137.global (Addr: 127.0.0.1:9177) (DC: dc1)"
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.789Z [INFO] raft/raft.go:1018: nomad.raft: updating configuration: command=AddNonvoter server-id=c54b5bf4-1159-34f6-032d-56aefeb08425 server-addr=127.0.0.1:9177 servers="[{Suffrage:Voter ID:df01ba65-d1b2-17a9-f792-a4459b3a7c09 Address:127.0.0.1:9171} {Suffrage:Voter ID:c3337778-811e-2675-87f5-006309888387 Address:127.0.0.1:9173} {Suffrage:Voter ID:186d5e15-c473-e2b3-b5a4-3259a84e10ef Address:127.0.0.1:9169} {Suffrage:Nonvoter ID:c54b5bf4-1159-34f6-032d-56aefeb08425 Address:127.0.0.1:9177}]"
TestAutopilot_RollingUpdate: autopilot_test.go:218: shutting down server s3
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.797Z [INFO] raft/replication.go:456: nomad.raft: aborting pipeline replication: peer="{Nonvoter c54b5bf4-1159-34f6-032d-56aefeb08425 127.0.0.1:9177}"
TestAutopilot_RollingUpdate: autopilot_test.go:235: waiting for s4 to stabalize and be promoted
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.975Z [ERROR] raft/raft.go:1656: nomad.raft: failed to make requestVote RPC: target="{Voter c3337778-811e-2675-87f5-006309888387 127.0.0.1:9173}" error="dial tcp 127.0.0.1:9173: connect: connection refused"
TestAutopilot_RollingUpdate: retry.go:121: autopilot_test.go:241: don't want "c3337778-811e-2675-87f5-006309888387"
autopilot_test.go:241: didn't find map[c54b5bf4-1159-34f6-032d-56aefeb08425:true] in []raft.ServerID{"df01ba65-d1b2-17a9-f792-a4459b3a7c09", "186d5e15-c473-e2b3-b5a4-3259a84e10ef"}
```
Note how s3, c3337778, is present in the peers list in the final
failure, but s4, c54b5bf4, is added as a Nonvoter and isn't present in
the final peers list.
When `nomad job inspect` encodes the response, if the decoded JSON
from the API doesn't exactly match the API struct, the field value
will be omitted even if it has a value. We only want the JSON struct
tag to `omitempty`.
This changeset:
* adds eval status to the error messages emitted when we have
placement failure in tests. The implementation here isn't quite
perfect but it's a lot better than "condition not met".
* enforces the ordering of teardown of the CSI test
* doesn't pass the purge flag to one of the two CSI tests, so that we
exercise both code paths.
Most tests bypass setting the token via the UI, instead choosing
to set it in localStorage directly, because the acceptance tests
for the token UI are sufficient to exercise that part of the UI,
so this speeds up the test a bit.
This is a minimal implementation that closes#7463. It doesn’t include
true support for moving around within the command to edit using arrow
keys because it gets too complex when managing wrapping at the edge of
the terminal. Instead, arrow keys are ignored. It also ignores ^A and
^E, which are cursor manipulations that pose similar problems to arrow
keys. It does support ^U, which deletes the entire command.
It also allows a command to be pasted, which was previously unsupported.
This is accomplished by migrating from Xterm.js’s onKey handler to
onData, which is recommended here:
https://github.com/xtermjs/xterm.js/issues/2673#issuecomment-574897733
onData is a higher-level handler that issues events with the final
interpreted data instead of the individual key events. That means the
processing in this PR has changed from inspecting DOM key events to
inspecting their ASCII equivalents, which I’ve extracted into a utility
dictionary for use in tests and implementation.
One consequence of ignoring most control characters is that if you paste
a string that includes a control character, that character will be
stripped. It’s somewhat strange for compound sequences like arrow keys;
if you run copy('/bin/b' + '\x1b[D' + 'ash') in a Javascript console and
paste what’s on the clipboard, you get "/bin/b[Dash". That’s because
the left arrow key, as in that centre portion of the string,
is represented by the escape character and a coded sequence. Stripping
the control character leaves the coded sequence as part of the paste.
That seems like an acceptable compromise vs either ignoring any pasted
string with control characters (confusing UX) or trying to interpret and
strip all such compound control sequences (difficult to be exhaustive).
The javascript Websocket API doesn't support setting custom headers
(e.g. `X-Nomad-Token`). This change adds support for having an
authentication handshake message: clients can set `ws_handshake` URL
query parameter to true and send a single handshake message with auth
token first before any other mssage.
This is a backward compatible change: it does not affect nomad CLI path, as it
doesn't set `ws_handshake` parameter.
This effectively overrides Bulma's default field layout tweaks
at different breakpoints. This includes going from flex to block
and different font-sizes.
The "default" order values as set by Bulma are different for different
breakpoints. Since this wasn't considering breakpoints, it resulted
in the unexpected reordering of pagination elements as different page
widths. Turns out removing this property gives us what we want.
If a volume-claiming alloc stops and the CSI Node plugin that serves
that alloc's volumes is missing, there's no way for the allocrunner
hook to send the `NodeUnpublish` and `NodeUnstage` RPCs.
This changeset addresses this issue with a redesign of the client-side
for CSI. Rather than unmounting in the alloc runner hook, the alloc
runner hook will simply exit. When the server gets the
`Node.UpdateAlloc` for the terminal allocation that had a volume claim,
it creates a volume claim GC job. This job will made client RPCs to a
new node plugin RPC endpoint, and only once that succeeds, move on to
making the client RPCs to the controller plugin. If the node plugin is
unavailable, the GC job will fail and be requeued.
Drew Bailey