open-consul/website/source/docs/internals/consensus.html.markdown

217 lines
10 KiB
Markdown

---
layout: "docs"
page_title: "Consensus Protocol"
sidebar_current: "docs-internals-consensus"
---
# Consensus Protocol
Consul uses a [consensus protocol](http://en.wikipedia.org/wiki/Consensus_(computer_science))
to provide [Consistency](http://en.wikipedia.org/wiki/CAP_theorem) as defined by CAP.
This page documents the details of this internal protocol. The consensus protocol is based on
["Raft: In search of an Understandable Consensus Algorithm"](https://ramcloud.stanford.edu/wiki/download/attachments/11370504/raft.pdf).
<div class="alert alert-block alert-warning">
<strong>Advanced Topic!</strong> This page covers technical details of
the internals of Consul. You don't need to know these details to effectively
operate and use Consul. These details are documented here for those who wish
to learn about them without having to go spelunking through the source code.
</div>
## Raft Protocol Overview
Raft is a relatively new consensus algorithm that is based on Paxos,
but is designed to have fewer states and a simpler, more understandable
algorithm. There are a few key terms to know when discussing Raft:
* Log - The primary unit of work in a Raft system is a log entry. The problem
of consistency can be decomposed into a *replicated log*. A log is an ordered
sequence of entries. We consider the log consistent if all members agree on
the entries and their order.
* FSM - [Finite State Machine](http://en.wikipedia.org/wiki/Finite-state_machine).
An FSM is a collection of finite states with transitions between them. As new logs
are applied, the FSM is allowed to transition between states. Application of the
same sequence of logs must result in the same state, meaning behavior must be deterministic.
* Peer set - The peer set is the set of all members participating in log replication.
For Consul's purposes, all server nodes are in the peer set of the local datacenter.
* Quorum - A quorum is a majority of members from a peer set, or (n/2)+1.
For example, if there are 5 members in the peer set, we would need 3 nodes
to form a quorum. If a quorum of nodes is unavailable for any reason, then the
cluster becomes *unavailable*, and no new logs can be committed.
* Committed Entry - An entry is considered *committed* when it is durably stored
on a quorum of nodes. Once an entry is committed it can be applied.
* Leader - At any given time, the peer set elects a single node to be the leader.
The leader is responsible for ingesting new log entries, replicating to followers,
and managing when an entry is considered committed.
Raft is a complex protocol, and will not be covered here in detail. For the full
specification, we recommend reading the [paper](https://ramcloud.stanford.edu/wiki/download/attachments/11370504/raft.pdf). We will attempt to provide a high
level description, which may be useful for building a mental picture.
Raft nodes are always in one of three states: follower, candidate or leader. All
nodes initially start out as a follower. In this state, nodes can accept log entries
from a leader and cast votes. If no entries are received for some time, nodes
self-promote to the candidate state. In the candidate state nodes request votes from
their peers. If a candidate receives a quorum of votes, then it is promoted to a leader.
The leader must accept new log entries and replicate to all the other followers.
In addition, if stale reads are not acceptable, all queries must also be performed on
the leader.
Once a cluster has a leader, it is able to accept new log entries. A client can
request that a leader append a new log entry, which is an opaque binary blob to
Raft. The leader then writes the entry to durable storage and attempts to replicate
to a quorum of followers. Once the log entry is considered *committed*, it can be
*applied* to a finite state machine. The finite state machine is application specific,
and in Consul's case, we use [LMDB](http://symas.com/mdb/) to maintain cluster state.
An obvious question relates to the unbounded nature of a replicated log. Raft provides
a mechanism by which the current state is snapshotted, and the log is compacted. Because
of the FSM abstraction, restoring the state of the FSM must result in the same state
as a replay of old logs. This allows Raft to capture the FSM state at a point in time,
and then remove all the logs that were used to reach that state. This is performed automatically
without user intervention, and prevents unbounded disk usage as well as minimizing
time spent replaying logs. One of the advantages of using LMDB is that it allows Consul
to continue accepting new transactions even while old state is being snapshotted,
preventing any availability issues.
Lastly, there is the issue of updating the peer set when new servers are joining
or existing servers are leaving. As long as a quorum of nodes is available, this
is not an issue as Raft provides mechanisms to dynamically update the peer set.
If a quorum of nodes is unavailable, then this becomes a very challenging issue.
For example, suppose there are only 2 peers, A and B. The quorum size is also
2, meaning both nodes must agree to commit a log entry. If either A or B fails,
it is now impossible to reach quorum. This means the cluster is unable to add,
or remove a node, or commit any additional log entries. This results in *unavailability*.
At this point, manual intervention would be required to remove either A or B,
and to restart the remaining node in bootstrap mode.
A Raft cluster of 3 nodes can tolerate a single node failure, while a cluster
of 5 can tolerate 2 node failures. The recommended configuration is to either
run 3 or 5 Consul servers per datacenter. This maximizes availability without
greatly sacrificing performance. See below for a deployment table.
In terms of performance, Raft is comparable to Paxos. Assuming stable leadership,
committing a log entry requires a single round trip to half of the cluster.
Thus performance is bound by disk I/O and network latency. Although Consul is
not designed to be a high-throughput write system, it should handle on the order
of hundreds to thousands of transactions per second depending on network and
hardware configuration.
## Raft in Consul
Only Consul server nodes participate in Raft, and are part of the peer set. All
client nodes forward requests to servers. Part of the reason for this design is
that as more members are added to the peer set, the size of the quorum also increases.
This introduces performance problems as you may be waiting for hundreds of machines
to agree on an entry instead of a handful.
When getting started, a single Consul server is put into "bootstrap" mode. This mode
allows it to self-elect as a leader. Once a leader is elected, other servers can be
added to the peer set in a way that preserves consistency and safety. Eventually,
bootstrap mode can be disabled, once the first few servers are added. See [this
guide](/docs/guides/bootstrapping.html) for more details.
Since all servers participate as part of the peer set, they all know the current
leader. When an RPC request arrives at a non-leader server, the request is
forwarded to the leader. If the RPC is a *query* type, meaning it is read-only,
then the leader generates the result based on the current state of the FSM. If
the RPC is a *transaction* type, meaning it modifies state, then the leader
generates a new log entry and applies it using Raft. Once the log entry is committed
and applied to the FSM, the transaction is complete.
Because of the nature of Raft's replication, performance is sensitive to network
latency. For this reason, each datacenter elects an independent leader, and maintains
a disjoint peer set. Data is partitioned by datacenter, so each leader is responsible
only for data in their datacenter. When a request is received for a remote datacenter,
the request is forwarded to the correct leader. This design allows for lower latency
transactions and higher availability without sacrificing consistency.
## Consistency Modes
Although all writes to the replicated log go through Raft, reads are more
flexible. To support various tradeoffs that developers may want, Consul
supports 3 different consistency modes for reads.
The three read modes are:
* default - Raft makes use of leader leasing, providing a time window
in which the leader assumes it's role is stable. However, if a leader
is partitioned from the remaining peers, a new leader may be elected
while the old leader is holding the lease. This means there are 2 leader
nodes. There is no risk of a split-brain since the old leader will be
unable to commit new logs. However, if the old leader services any reads
the values are potentially stale. The default consistency mode relies only
on leader leasing, exposing clients to potentially stale values. We make
this trade off because reads are fast, usually strongly consistent, and
only stale in a hard to trigger situation. The time window of stale reads
is also bounded, since the leader will step down due to the partition.
* consistent - This mode is strongly consistent without caveats. It requires
that a leader verify with a quorum of peers that it is still leader. This
introduces an additional round-trip to all server nodes. The trade off is
always consistent reads, but increased latency due to an extra round trip.
* stale - This mode allows any server to service the read, regardless of if
it is the leader. This means reads can be arbitrarily stale, but are generally
within 50 milliseconds of the leader. The trade off is very fast and scalable
reads but values will be stale. This mode allows reads without a leader, meaning
a cluster that is unavailable will still be able to respond.
For more documentation about using these various modes, see the [HTTP API](/docs/agent/http.html).
## Deployment Table
Below is a table that shows for the number of servers how large the
quorum is, as well as how many node failures can be tolerated. The
recommended deployment is either 3 or 5 servers. A single server deployment
is _**highly**_ discouraged as data loss is inevitable in a failure scenario.
<table class="table table-bordered table-striped">
<tr>
<th>Servers</th>
<th>Quorum Size</th>
<th>Failure Tolerance</th>
</tr>
<tr>
<td>1</td>
<td>1</td>
<td>0</td>
</tr>
<tr>
<td>2</td>
<td>2</td>
<td>0</td>
</tr>
<tr class="warning">
<td>3</td>
<td>2</td>
<td>1</td>
</tr>
<tr>
<td>4</td>
<td>3</td>
<td>1</td>
</tr>
<tr class="warning">
<td>5</td>
<td>3</td>
<td>2</td>
</tr>
<tr>
<td>6</td>
<td>4</td>
<td>2</td>
</tr>
<tr>
<td>7</td>
<td>4</td>
<td>3</td>
</tr>
</table>