luxolus
/
open-consul
2
0
Fork 0
Code Issues 1 Pull Requests Packages Releases Wiki Activity
open-consul/website/source/docs/platform/k8s/run.html.md

17 KiB
Raw Blame History

layout page_title sidebar_current description
docs Installing Consul on Kubernetes - Kubernetes docs-platform-k8s-run Consul can run directly on Kubernetes, both in server or client mode. For pure-Kubernetes workloads, this enables Consul to also exist purely within Kubernetes. For heterogeneous workloads, Consul agents can join a server running inside or outside of Kubernetes.

Installing Consul on Kubernetes

Consul can run directly on Kubernetes, both in server or client mode. For pure-Kubernetes workloads, this enables Consul to also exist purely within Kubernetes. For heterogeneous workloads, Consul agents can join a server running inside or outside of Kubernetes.

This page starts with a large how-to section for various specific tasks. To learn more about the general architecture of Consul on Kubernetes, scroll down to the architecture section. If you would like to get hands-on experience testing Consul on Kubernetes, try the step-by-step beginner tutorial with an accompanying video in the Minikube with Consul guide

Helm Chart Installation

The recommended way to run Consul on Kubernetes is via the Helm chart. This will install and configure all the necessary components to run Consul. The configuration enables you to run just a server cluster, just a client cluster, or both. Using the Helm chart, you can have a full Consul deployment up and running in minutes.

A step-by-step beginner tutorial and accompanying video can be found at the Minikube with Consul guide.

While the Helm chart exposes dozens of useful configurations and automatically sets up complex resources, it does not automatically operate Consul. You are still responsible for learning how to monitor, backup, upgrade, etc. the Consul cluster.

The Helm chart has no required configuration and will install a Consul cluster with sane defaults out of the box. Prior to going to production, it is highly recommended that you learn about the configuration options.

~> Security Warning: By default, the chart will install an insecure configuration of Consul. This provides a less complicated out-of-box experience for new users, but is not appropriate for a production setup. It is highly recommended to use a properly secured Kubernetes cluster or make sure that you understand and enable the recommended security features. Currently, some of these features are not supported in the Helm chart and require additional manual configuration.

Prerequisites

The Consul Helm chart works with Helm 2 and Helm 3. If using Helm 2, you will need to install Tiller by following the Helm 2 Installation Guide.

Installing Consul

Determine the latest version of the Consul Helm chart by visiting https://github.com/hashicorp/consul-helm/releases.

Clone the chart at that version. For example, if the latest version is v0.8.1, you would run:

$ git clone --single-branch --branch v0.8.1 https://github.com/hashicorp/consul-helm.git
Cloning into 'consul-helm'...
...
You are in 'detached HEAD' state...

Ensure you've checked out the correct version with helm inspect chart:

$ helm inspect chart ./consul-helm
apiVersion: v1
description: Install and configure Consul on Kubernetes.
home: https://www.consul.io
name: consul
sources:
- https://github.com/hashicorp/consul
- https://github.com/hashicorp/consul-helm
- https://github.com/hashicorp/consul-k8s
version: 0.8.1

Now you're ready to install Consul! To install Consul with the default configuration using Helm 3 run:

$ helm install hashicorp ./consul-helm
NAME: hashicorp
...

-> If using Helm 2, run: helm install --name hashicorp ./consul-helm

That's it. The Helm chart does everything to set up a recommended Consul-on-Kubernetes deployment. In a couple minutes, a Consul cluster will be formed and a leader elected and every node will have a running Consul agent.

Customizing Your Installation

If you want to customize your installation, create a config.yaml file to override the default settings. You can learn what settings are available by running helm inspect values ./consul-helm or by reading the Helm Chart Reference.

Once you've created your config.yaml file, run helm install with the -f flag:

$ helm install hashicorp ./consul-helm -f config.yaml

If you've already installed Consul and want to make changes, you'll need to run helm upgrade. See the Upgrading Consul on Kubernetes section for more details.

Uninstalling Consul

Consul can be uninstalled via the helm delete command:

$ helm delete hashicorp
release "hashicorp" uninstalled

-> If using Helm 2, run helm delete --purge hashicorp

After deleting the Helm release, you need to delete the PersistentVolumeClaim's for the persistent volumes that store Consul's data. These are not deleted by Helm due to a bug. To delete, run:

$ kubectl get pvc -l chart=consul-helm
NAME                                   STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
data-default-hashicorp-consul-server-0   Bound    pvc-32cb296b-1213-11ea-b6f0-42010a8001db   10Gi       RWO            standard       17m
data-default-hashicorp-consul-server-1   Bound    pvc-32d79919-1213-11ea-b6f0-42010a8001db   10Gi       RWO            standard       17m
data-default-hashicorp-consul-server-2   Bound    pvc-331581ea-1213-11ea-b6f0-42010a8001db   10Gi       RWO            standard       17m

$ kubectl delete pvc -l chart=consul-helm
persistentvolumeclaim "data-default-hashicorp-consul-server-0" deleted
persistentvolumeclaim "data-default-hashicorp-consul-server-1" deleted
persistentvolumeclaim "data-default-hashicorp-consul-server-2" deleted

Viewing the Consul UI

The Consul UI is enabled by default when using the Helm chart. For security reasons, it isn't exposed via a LoadBalancer Service by default so you must use kubectl port-forward to visit the UI:

$ kubectl port-forward service/hashicorp-consul-server 8500:8500
...

Once the port is forwarded navigate to http://localhost:8500.

If you want to expose the UI via a Kubernetes Service, configure the ui.service chart values. This service will allow requests to the Consul servers so it should not be open to the world.

Joining an Existing Consul Cluster

If you have a Consul cluster already running, you can configure your Kubernetes nodes to join this existing cluster.

# config.yaml
global:
  enabled: false

client:
  enabled: true
  join:
    - "provider=my-cloud config=val ..."

The config.yaml file to configure the Helm chart sets the proper configuration to join an existing cluster.

The global.enabled value first disables all chart components by default so that each component is opt-in. This allows us to only setup the client agents. We then opt-in to the client agents by setting client.enabled to true.

Next, client.join is set to an array of valid -retry-join values. In the example above, a fake cloud auto-join value is specified. This should be set to resolve to the proper addresses of your existing Consul cluster.

-> Networking: Note that for the Kubernetes nodes to join an existing cluster, the nodes (and specifically the agent pods) must be able to connect to all other server and client agents inside and outside of Kubernetes. If this isn't possible, consider running the Kubernetes agents as a separate DC or adopting Enterprise for network segments.

Accessing the Consul HTTP API

The Consul HTTP API should be accessed by communicating to the local agent running on the same node. While technically any listening agent (client or server) can respond to the HTTP API, communicating with the local agent has important caching behavior, and allows you to use the simpler /agent endpoints for services and checks.

For Consul installed via the Helm chart, a client agent is installed on each Kubernetes node. This is explained in the architecture section. To access the agent, you may use the downward API.

An example pod specification is shown below. In addition to pods, anything with a pod template can also access the downward API and can therefore also access Consul: StatefulSets, Deployments, Jobs, etc.

apiVersion: v1
kind: Pod
metadata:
  name: consul-example
spec:
  containers:
    - name: example
      image: "consul:latest"
      env:
        - name: HOST_IP
          valueFrom:
            fieldRef:
              fieldPath: status.hostIP
      command:
        - "/bin/sh"
        - "-ec"
        - |
            export CONSUL_HTTP_ADDR="${HOST_IP}:8500"
            consul kv put hello world            
  restartPolicy: Never

An example Deployment is also shown below to show how the host IP can be accessed from nested pod specifications:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: consul-example-deployment
spec:
  replicas: 1
  selector:
    matchLabels:
      app: consul-example
  template:
    metadata:
      labels:
        app: consul-example
    spec:
      containers:
        - name: example
          image: "consul:latest"
          env:
            - name: HOST_IP
              valueFrom:
                fieldRef:
                  fieldPath: status.hostIP
          command:
            - "/bin/sh"
            - "-ec"
            - |
                export CONSUL_HTTP_ADDR="${HOST_IP}:8500"
                consul kv put hello world

Upgrading Consul on Kubernetes

To upgrade Consul on Kubernetes, we follow the same pattern as generally upgrading Consul, except we can use the Helm chart to step through a rolling deploy. It is important to understand how to generally upgrade Consul before reading this section.

Upgrading Consul on Kubernetes will follow the same pattern: each server will be updated one-by-one. After that is successful, the clients will be updated in batches.

Upgrading Consul Servers

To initiate the upgrade, change the server.image value to the desired Consul version. For illustrative purposes, the example below will use consul:123.456. Also set the server.updatePartition value equal to the number of server replicas:

server:
  image: "consul:123.456"
  replicas: 3
  updatePartition: 3

The updatePartition value controls how many instances of the server cluster are updated. Only instances with an index greater than the updatePartition value are updated (zero-indexed). Therefore, by setting it equal to replicas, none should update yet.

Next, run the upgrade. You should run this with --dry-run first to verify the changes that will be sent to the Kubernetes cluster.

$ helm upgrade consul ./
...

This should cause no changes (although the resource will be updated). If everything is stable, begin by decreasing the updatePartition value by one, and running helm upgrade again. This should cause the first Consul server to be stopped and restarted with the new image.

Wait until the Consul server cluster is healthy again (30s to a few minutes) then decrease updatePartition and upgrade again. Continue until updatePartition is 0. At this point, you may remove the updatePartition configuration. Your server upgrade is complete.

Upgrading Consul Clients

With the servers upgraded, it is time to upgrade the clients. To upgrade the clients, set the client.image value to the desired Consul version. Then, run helm upgrade. This will upgrade the clients in batches, waiting until the clients come up healthy before continuing.

Using Existing Persistent Volume Claims (PVCs)

The only way to use a pre-created PVC is to name them in the format Kubernetes expects:

data-<kubernetes namespace>-<helm release name>-consul-server-<ordinal>

The Kubernetes namespace you are installing into, helm release name, and ordinal must match between your Consul servers and your pre-created PVCs. You only need as many PVCs as you have Consul servers. For example, given a Kubernetes namespace of "vault" and a release name of "consul" and 5 servers, you would need to create PVCs with the following names:

data-vault-consul-consul-server-0
data-vault-consul-consul-server-1
data-vault-consul-consul-server-2
data-vault-consul-consul-server-3
data-vault-consul-consul-server-4

If you are using your own storage, you'll need to configure a storage class. See the documentation for configuring storage classes here.

Architecture

We recommend running Consul on Kubernetes with the same general architecture as running it anywhere else. There are some benefits Kubernetes can provide that eases operating a Consul cluster and we document those below. The standard production deployment guide is still an important read even if running Consul within Kubernetes.

Each section below will outline the different components of running Consul on Kubernetes and an overview of the resources that are used within the Kubernetes cluster.

Server Agents

The server agents are run as a StatefulSet, using persistent volume claims to store the server state. This also ensures that the node ID is persisted so that servers can be rescheduled onto new IP addresses without causing issues. The server agents are configured with anti-affinity rules so that they are placed on different nodes. A readiness probe is configured that marks the pod as ready only when it has established a leader.

A Service is registered to represent the servers and expose the various ports. The DNS address of this service is used to join the servers to each other without requiring any other access to the Kubernetes cluster. The service is configured to publish non-ready endpoints so that it can be used for joining during bootstrap and upgrades.

Additionally, a PodDisruptionBudget is configured so the Consul server cluster maintains quorum during voluntary operational events. The maximum unavailable is (n/2)-1 where n is the number of server agents.

-> Note: Kubernetes and Helm do not delete Persistent Volumes or Persistent Volume Claims when a StatefulSet is deleted, so this must done manually when removing servers.

Client Agents

The client agents are run as a DaemonSet. This places one agent (within its own pod) on each Kubernetes node. The clients expose the Consul HTTP API via a static port (default 8500) bound to the host port. This enables all other pods on the node to connect to the node-local agent using the host IP that can be retrieved via the Kubernetes downward API. See accessing the Consul HTTP API for an example.

There is a major limitation to this: there is no way to bind to a local-only host port. Therefore, any other node can connect to the agent. This should be considered for security. For a properly production-secured agent with TLS and ACLs, this is safe.

Some people prefer to run Consul agent per pod architectures, since this makes it easy to register the pod as a service. However, this turns a pod into a "node" in Consul and also causes an explosion of resource usage since every pod needs a Consul agent. We recommend instead running an agent (in a dedicated pod) per node, via the DaemonSet. This maintains the node equivalence in Consul. Service registration should be handled via the catalog syncing feature with Services rather than pods.

-> Note: Due to a limitation of anti-affinity rules with DaemonSets, a client-mode agent runs alongside server-mode agents in Kubernetes. This duplication wastes some resources, but otherwise functions perfectly fine.