open-consul/website/source/docs/agent/http/agent.html.markdown

layout	page_title	sidebar_current	description
docs	Agent (HTTP)	docs-agent-http-agent	The Agent endpoints are used to interact with the local Consul agent.

Agent HTTP Endpoint

The Agent endpoints are used to interact with the local Consul agent. Usually, services and checks are registered with an agent which then takes on the burden of keeping that data synchronized with the cluster. For example, the agent registers services and checks with the Catalog and performs anti-entropy to recover from outages.

The following endpoints are supported:

• /v1/agent/checks : Returns the checks the local agent is managing
• /v1/agent/services : Returns the services the local agent is managing
• /v1/agent/members : Returns the members as seen by the local serf agent
• /v1/agent/self : Returns the local node configuration
• /v1/agent/maintenance : Manages node maintenance mode
• /v1/agent/join/<address> : Triggers the local agent to join a node
• /v1/agent/force-leave/<node>: Forces removal of a node
• /v1/agent/check/register : Registers a new local check
• /v1/agent/check/deregister/<checkID> : Deregisters a local check
• /v1/agent/check/pass/<checkID> : Marks a local check as passing
• /v1/agent/check/warn/<checkID> : Marks a local check as warning
• /v1/agent/check/fail/<checkID> : Marks a local check as critical
• /v1/agent/check/update/<checkID> : Updates a local check
• /v1/agent/service/register : Registers a new local service
• /v1/agent/service/deregister/<serviceID> : Deregisters a local service
• /v1/agent/service/maintenance/<serviceID> : Manages service maintenance mode

/v1/agent/checks

This endpoint is used to return all the checks that are registered with the local agent. These checks were either provided through configuration files or added dynamically using the HTTP API. It is important to note that the checks known by the agent may be different from those reported by the Catalog. This is usually due to changes being made while there is no leader elected. The agent performs active anti-entropy, so in most situations everything will be in sync within a few seconds.

This endpoint is hit with a GET and returns a JSON body like this:

{
  "service:redis": {
    "Node": "foobar",
    "CheckID": "service:redis",
    "Name": "Service 'redis' check",
    "Status": "passing",
    "Notes": "",
    "Output": "",
    "ServiceID": "redis",
    "ServiceName": "redis"
  }
}

/v1/agent/services

This endpoint is used to return all the services that are registered with the local agent. These services were either provided through configuration files or added dynamically using the HTTP API. It is important to note that the services known by the agent may be different from those reported by the Catalog. This is usually due to changes being made while there is no leader elected. The agent performs active anti-entropy, so in most situations everything will be in sync within a few seconds.

This endpoint is hit with a GET and returns a JSON body like this:

{
  "redis": {
    "ID": "redis",
    "Service": "redis",
    "Tags": null,
    "Address": "",
    "Port": 8000
  }
}

/v1/agent/members

This endpoint is used to return the members the agent sees in the cluster gossip pool. Due to the nature of gossip, this is eventually consistent: the results may differ by agent. The strongly consistent view of nodes is instead provided by "/v1/catalog/nodes".

For agents running in server mode, providing a ?wan=1 query parameter returns the list of WAN members instead of the LAN members returned by default.

This endpoint is hit with a GET and returns a JSON body like:

[
  {
    "Name": "foobar",
    "Addr": "10.1.10.12",
    "Port": 8301,
    "Tags": {
      "bootstrap": "1",
      "dc": "dc1",
      "port": "8300",
      "role": "consul"
    },
    "Status": 1,
    "ProtocolMin": 1,
    "ProtocolMax": 2,
    "ProtocolCur": 2,
    "DelegateMin": 1,
    "DelegateMax": 3,
    "DelegateCur": 3
  }
]

/v1/agent/self

This endpoint is used to return the configuration and member information of the local agent under the Config key.

Consul 0.7.0 and later also includes a snapshot of various operating statistics under the Stats key. These statistics are intended to help human operators for debugging and may change over time, so this part of the interface should not be consumed programmatically.

It returns a JSON body like this:

{
  "Config": {
    "Bootstrap": true,
    "Server": true,
    "Datacenter": "dc1",
    "DataDir": "/tmp/consul",
    "DNSRecursor": "",
    "DNSRecursors": [],
    "Domain": "consul.",
    "LogLevel": "INFO",
    "NodeName": "foobar",
    "ClientAddr": "127.0.0.1",
    "BindAddr": "0.0.0.0",
    "AdvertiseAddr": "10.1.10.12",
    "Ports": {
      "DNS": 8600,
      "HTTP": 8500,
      "RPC": 8400,
      "SerfLan": 8301,
      "SerfWan": 8302,
      "Server": 8300
    },
    "LeaveOnTerm": false,
    "SkipLeaveOnInt": false,
    "StatsiteAddr": "",
    "Protocol": 1,
    "EnableDebug": false,
    "VerifyIncoming": false,
    "VerifyOutgoing": false,
    "CAFile": "",
    "CertFile": "",
    "KeyFile": "",
    "StartJoin": [],
    "UiDir": "",
    "PidFile": "",
    "EnableSyslog": false,
    "RejoinAfterLeave": false
  },
  "Coord": {
    "Adjustment": 0,
    "Error": 1.5,
    "Vec": [0,0,0,0,0,0,0,0]
  },
  "Member": {
    "Name": "foobar",
    "Addr": "10.1.10.12",
    "Port": 8301,
    "Tags": {
      "bootstrap": "1",
      "dc": "dc1",
      "port": "8300",
      "role": "consul",
      "vsn": "1",
      "vsn_max": "1",
      "vsn_min": "1"
    },
    "Status": 1,
    "ProtocolMin": 1,
    "ProtocolMax": 2,
    "ProtocolCur": 2,
    "DelegateMin": 2,
    "DelegateMax": 4,
    "DelegateCur": 4
  }
}

/v1/agent/maintenance

The node maintenance endpoint can place the agent into "maintenance mode". During maintenance mode, the node will be marked as unavailable and will not be present in DNS or API queries. This API call is idempotent. Maintenance mode is persistent and will be automatically restored on agent restart.

The ?enable flag is required. Acceptable values are either true (to enter maintenance mode) or false (to resume normal operation).

The ?reason flag is optional. If provided, its value should be a text string explaining the reason for placing the node into maintenance mode. This is simply to aid human operators. If no reason is provided, a default value will be used instead.

The return code is 200 on success.

/v1/agent/join/<address>

This endpoint is hit with a GET and is used to instruct the agent to attempt to connect to a given address. For agents running in server mode, providing a ?wan=1 query parameter causes the agent to attempt to join using the WAN pool.

The return code is 200 on success.

/v1/agent/force-leave/<node>

This endpoint is hit with a GET and is used to instruct the agent to force a node into the left state. If a node fails unexpectedly, then it will be in a failed state. Once in the failed state, Consul will attempt to reconnect, and the services and checks belonging to that node will not be cleaned up. Forcing a node into the left state allows its old entries to be removed.

The endpoint always returns 200.

/v1/agent/check/register

The register endpoint is used to add a new check to the local agent. There is more documentation on checks here. Checks may be of script, HTTP, TCP, or TTL type. The agent is responsible for managing the status of the check and keeping the Catalog in sync.

The register endpoint expects a JSON request body to be PUT. The request body must look like:

{
  "ID": "mem",
  "Name": "Memory utilization",
  "Notes": "Ensure we don't oversubscribe memory",
  "DeregisterCriticalServiceAfter": "90m",
  "Script": "/usr/local/bin/check_mem.py",
  "DockerContainerID": "f972c95ebf0e",
  "Shell": "/bin/bash",
  "HTTP": "http://example.com",
  "TCP": "example.com:22",
  "Interval": "10s",
  "TTL": "15s",
  "TLSSkipVerify": true
}

The Name field is mandatory, as is one of Script, HTTP, TCP or TTL. Script, TCP and HTTP also require that Interval be set.

If an ID is not provided, it is set to Name. You cannot have duplicate ID entries per agent, so it may be necessary to provide an ID.

The Notes field is not used internally by Consul and is meant to be human-readable.

In Consul 0.7 and later, checks that are associated with a service may also contain an optional DeregisterCriticalServiceAfter field, which is a timeout in the same Go time format as Interval and TTL. If a check is in the critical state for more than this configured value, then its associated service (and all of its associated checks) will automatically be deregistered. The minimum timeout is 1 minute, and the process that reaps critical services runs every 30 seconds, so it may take slightly longer than the configured timeout to trigger the deregistration. This should generally be configured with a timeout that's much, much longer than any expected recoverable outage for the given service.

If a Script is provided, the check type is a script, and Consul will evaluate the script every Interval to update the status.

If a DockerContainerID is provided, the check is a Docker check, and Consul will evaluate the script every Interval in the given container using the specified Shell. Note that Shell is currently only supported for Docker checks.

An HTTP check will perform an HTTP GET request against the value of HTTP (expected to be a URL) every Interval. If the response is any 2xx code, the check is passing. If the response is 429 Too Many Requests, the check is warning. Otherwise, the check is critical. HTTP checks also support SSL. By default, a valid SSL certificate is expected. Certificate verification can be controlled using the TLSSkipVerify.

If TLSSkipVerify is set to true, certificate verification will be disabled. By default, certificate verification is enabled.

A TCP check will perform an TCP connection attempt against the value of TCP (expected to be an IP or hostname plus port combination) every Interval. If the connection attempt is successful, the check is passing. If the connection attempt is unsuccessful, the check is critical. In the case of a hostname that resolves to both IPv4 and IPv6 addresses, an attempt will be made to both addresses, and the first successful connection attempt will result in a successful check.

If a TTL type is used, then the TTL update endpoint must be used periodically to update the state of the check.

The ServiceID field can be provided to associate the registered check with an existing service provided by the agent.

The Status field can be provided to specify the initial state of the health check.

This endpoint supports ACL tokens. If the query string includes a ?token=<token-id>, the registration will use the provided token to authorize the request. The token is also persisted in the agent's local configuration to enable periodic anti-entropy syncs and seamless agent restarts.

The return code is 200 on success.

/v1/agent/check/deregister/<checkId>

This endpoint is used to remove a check from the local agent. The CheckID must be passed on the path. The agent will take care of deregistering the check from the Catalog.

The return code is 200 on success.

/v1/agent/check/pass/<checkId>

This endpoint is used with a check that is of the TTL type. When this endpoint is accessed via a GET, the status of the check is set to passing and the TTL clock is reset.

The optional ?note= query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's Output field in the check endpoints.

The return code is 200 on success.

/v1/agent/check/warn/<checkId>

This endpoint is used with a check that is of the TTL type. When this endpoint is accessed via a GET, the status of the check is set to warning, and the TTL clock is reset.

The optional ?note= query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's Output field in the check endpoints.

The return code is 200 on success.

/v1/agent/check/fail/<checkId>

This endpoint is used with a check that is of the TTL type. When this endpoint is accessed via a GET, the status of the check is set to critical, and the TTL clock is reset.

The optional ?note= query parameter can be used to associate a human-readable message with the status of the check. This will be passed through to the check's Output field in the check endpoints.

The return code is 200 on success.

/v1/agent/check/update/<checkId>

This endpoint is used with a check that is of the TTL type. When this endpoint is accessed with a PUT, the status and output of the check are updated and the TTL clock is reset.

This endpoint expects a JSON request body to be put. The request body must look like:

{
  "Status": "passing",
  "Output": "curl reported a failure:\n\n..."
}

The Status field is mandatory, and must be set to passing, warning, or critical.

Output is an optional field that will associate a human-readable message with the status of the check, such as the output of the checking script or process. This will be truncated if it exceeds 4KB in size. This will be passed through to the check's Output field in the check endpoints.

The return code is 200 on success.

/v1/agent/service/register

The register endpoint is used to add a new service, with an optional health check, to the local agent. There is more documentation on services here. The agent is responsible for managing the status of its local services, and for sending updates about its local services to the servers to keep the global Catalog in sync.

The register endpoint expects a JSON request body to be PUT. The request body must look like:

{
  "ID": "redis1",
  "Name": "redis",
  "Tags": [
    "primary",
    "v1"
  ],
  "Address": "127.0.0.1",
  "Port": 8000,
  "EnableTagOverride": false,
  "Check": {
    "DeregisterCriticalServiceAfter": "90m",
    "Script": "/usr/local/bin/check_redis.py",
    "HTTP": "http://localhost:5000/health",
    "Interval": "10s",
    "TTL": "15s"
  }
}

The Name field is mandatory. If an ID is not provided, it is set to Name. You cannot have duplicate ID entries per agent, so it may be necessary to provide an ID in the case of a collision.

Tags, Address, Port, Check and EnableTagOverride are optional.

If Address is not provided or left empty, then the agent's address will be used as the address for the service during DNS queries. When querying for services using HTTP endpoints such as service health or service catalog and encountering an empty Address field for a service, use the Address field of the agent node associated with that instance of the service, which is returned alongside the service information.

If Check is provided, only one of Script, HTTP, TCP or TTL should be specified. Script and HTTP also require Interval. The created check will be named "service:<ServiceId>".

In Consul 0.7 and later, checks that are associated with a service may also contain an optional DeregisterCriticalServiceAfter field, which is a timeout in the same Go time format as Interval and TTL. If a check is in the critical state for more than this configured value, then its associated service (and all of its associated checks) will automatically be deregistered. The minimum timeout is 1 minute, and the process that reaps critical services runs every 30 seconds, so it may take slightly longer than the configured timeout to trigger the deregistration. This should generally be configured with a timeout that is much, much longer than any expected recoverable outage for the given service.

There is more information about checks here.

The EnableTagOverride option can be specified to disable the anti-entropy feature for this service's tags. If EnableTagOverride is set to true then external agents can update this service in the catalog and modify the tags. Subsequent local sync operations by this agent will ignore the updated tags. For instance, if an external agent modified both the tags and the port for this service and EnableTagOverride was set to true then after the next sync cycle the service's port would revert to the original value but the tags would maintain the updated value. As a counter example, if an external agent modified both the tags and port for this service and EnableTagOverride was set to false then after the next sync cycle the service's port and the tags would revert to the original value and all modifications would be lost.

It's important to note that this applies only to the locally registered service. If you have multiple nodes all registering the same service their EnableTagOverride configuration and all other service configuration items are independent of one another. Updating the tags for the service registered on one node is independent of the same service (by name) registered on another node. If EnableTagOverride is not specified the default value is false. See anti-entropy syncs for more info.

This endpoint supports ACL tokens. If the query string includes a ?token=<token-id>, the registration will use the provided token to authorize the request. The token is also persisted in the agent's local configuration to enable periodic anti-entropy syncs and seamless agent restarts.

The return code is 200 on success.

/v1/agent/service/deregister/<serviceId>

The deregister endpoint is used to remove a service from the local agent. The ServiceID must be passed after the slash. The agent will take care of deregistering the service with the Catalog. If there is an associated check, that is also deregistered.

The return code is 200 on success.

/v1/agent/service/maintenance/<serviceId>

The service maintenance endpoint allows placing a given service into "maintenance mode". During maintenance mode, the service will be marked as unavailable and will not be present in DNS or API queries. This API call is idempotent. Maintenance mode is persistent and will be automatically restored on agent restart. The maintenance endpoint expects a PUT request.

The ?enable flag is required. Acceptable values are either true (to enter maintenance mode) or false (to resume normal operation).

The ?reason flag is optional. If provided, its value should be a text string explaining the reason for placing the service into maintenance mode. This is simply to aid human operators. If no reason is provided, a default value will be used instead.

The return code is 200 on success.