12 KiB
| layout | page_title | sidebar_current | description |
|---|---|---|---|
| docs | Prepared Queries (HTTP) | docs-agent-http-query | The Query endpoints are used to manage and execute prepared queries. |
Prepared Query HTTP Endpoint
The Prepared Query endpoints are used to create, update, destroy, and execute prepared queries.
Prepared queries allow you to register a complex service query and then execute it later via its ID or name to get a set of healthy nodes that provide a given service. This is particularly useful in combination with Consul's DNS Interface as it allows for much richer queries than would be possible given the limited entry points exposed by DNS.
The following endpoints are supported:
/v1/query: Creates a new prepared query or lists all prepared queries/v1/query/<query>: Updates, fetches, or deletes a prepared query/v1/query/<query or name>/execute: Executes a prepared query by its ID or optional name
Not all endpoints support blocking queries and all consistency modes, see details in the sections below.
The query endpoints support the use of ACL Tokens. Prepared queries have some special handling of ACL Tokens that are called out where applicable with the details of each endpoint.
See the Prepared Query ACLs internals guide for more details about how prepared query policies work.
/v1/query
The general query endpoint supports the POST and GET methods.
POST Method
When using the POST method, Consul will create a new prepared query and return
its ID if it is created successfully.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter.
If ACLs are enabled, the client will need to supply an ACL Token with query
write privileges for the Name of the query being created.
The create operation expects a JSON request body that defines the prepared query, like this example:
{
"Name": "my-query",
"Session": "adf4238a-882b-9ddc-4a9d-5b6758e4159e",
"Token": "",
"Service": {
"Service": "redis",
"Failover": {
"NearestN": 3,
"Datacenters": ["dc1", "dc2"]
},
"OnlyPassing": false,
"Tags": ["master", "!experimental"]
},
"DNS": {
"TTL": "10s"
}
}
Only the Service field inside the Service structure is mandatory, all other
fields will take their default values if they are not included.
Name is an optional friendly name that can be used to execute a query instead
of using its ID.
Session provides a way to automatically remove a prepared query when the
given session is invalidated. This is optional, and if not given the prepared
query must be manually removed when no longer needed.
Token, if specified, is a captured ACL Token that is reused as the ACL Token
every time the query is executed. This allows queries to be executed by clients
with lesser or even no ACL Token, so this should be used with care. The token
itself can only be seen by clients with a management token. If the Token
field is left blank or omitted, the client's ACL Token will be used to determine
if they have access to the service being queried. If the client does not supply
an ACL Token, the anonymous token will be used.
Note that Consul version 0.6.3 and earlier would automatically capture the ACL
Token for use in the future when prepared queries were executed and would
execute with the same privileges as the definer of the prepared query. Older
queries wishing to obtain the new behavior will need to be updated to remove
their captured Token field. Capturing ACL Tokens is analogous to
PostgreSQL’s SECURITY DEFINER
attribute which can be set on functions. This change in effect moves Consul
from using SECURITY DEFINER by default to SECURITY INVOKER by default for
new Prepared Queries.
The set of fields inside the Service structure define the query's behavior.
Service is the name of the service to query. This is required.
Failover contains two fields, both of which are optional, and determine what
happens if no healthy nodes are available in the local datacenter when the query
is executed. It allows the use of nodes in other datacenters with very little
configuration.
If NearestN is set to a value greater than zero, then the query
will be forwarded to up to NearestN other datacenters based on their estimated
network round trip time using Network Coordinates
from the WAN gossip pool. The median round trip time from the server handling the
query to the servers in the remote datacenter is used to determine the priority.
The default value is zero. All Consul servers must be running version 0.6.0 or
above in order for this feature to work correctly. If any servers are not running
the required version of Consul they will be considered last since they won't have
any available network coordinate information.
Datacenters contains a fixed list of remote datacenters to forward the query
to if there are no healthy nodes in the local datacenter. Datacenters are queried
in the order given in the list. If this option is combined with NearestN, then
the NearestN queries will be performed first, followed by the list given by
Datacenters. A given datacenter will only be queried one time during a failover,
even if it is selected by both NearestN and is listed in Datacenters. The
default value is an empty list.
OnlyPassing controls the behavior of the query's health check filtering. If
this is set to false, the results will include nodes with checks in the passing
as well as the warning states. If this is set to true, only nodes with checks
in the passing state will be returned. The default value is false.
Tags provides a list of service tags to filter the query results. For a service
to pass the tag filter it must have all of the required tags, and none of the
excluded tags (prefixed with !). The default value is an empty list, which does
no tag filtering.
TTL in the DNS structure is a duration string that can use "s" as a
suffix for seconds. It controls how the TTL is set when query results are served
over DNS. If this isn't specified, then the Consul agent configuration for the given
service will be used (see DNS Caching). If this is
specified, it will take precedence over any Consul agent-specific configuration.
If no TTL is specified here or at the Consul agent level, then the TTL will
default to 0.
The return code is 200 on success and the ID of the created query is returned in a JSON body:
{
"ID": "8f246b77-f3e1-ff88-5b48-8ec93abf3e05"
}
GET Method
When using the GET method, Consul will provide a listing of all prepared queries.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter. This endpoint supports blocking
queries and all consistency modes.
If ACLs are enabled, then the client will only see prepared queries for which their
token has query read privileges. A management token will be able to see all
prepared queries. Tokens will be redacted and displayed as <hidden> unless a
management token is used.
This returns a JSON list of prepared queries, which looks like:
[
{
"ID": "8f246b77-f3e1-ff88-5b48-8ec93abf3e05",
"Name": "my-query",
"Session": "adf4238a-882b-9ddc-4a9d-5b6758e4159e",
"Token": "<hidden>",
"Service": {
"Service": "redis",
"Failover": {
"NearestN": 3,
"Datacenters": ["dc1", "dc2"]
},
"OnlyPassing": false,
"Tags": ["master", "!experimental"]
},
"DNS": {
"TTL": "10s"
},
"RaftIndex": {
"CreateIndex": 23,
"ModifyIndex": 42
}
}
]
/v1/query/<query>
The query-specific endpoint supports the GET, PUT, and DELETE methods. The
<query> argument is the ID of an existing prepared query.
PUT Method
The PUT method allows an existing prepared query to be updated.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter.
If ACLs are enabled, the client will need to supply an ACL Token with query
write privileges for the Name of the query being updated.
The body is the same as is used to create a prepared query, as described above.
If the API call succeeds, a 200 status code is returned.
GET Method
The GET method allows an existing prepared query to be fetched.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter. This endpoint supports blocking
queries and all consistency modes.
The returned response is the same as the list of prepared queries above, only with a single item present. If the query does not exist then a 404 status code will be returned.
If ACLs are enabled, then the client will only see prepared queries for which their
token has query read privileges. A management token will be able to see all
prepared queries. Tokens will be redacted and displayed as <hidden> unless a
management token is used.
DELETE Method
The DELETE method is used to delete a prepared query.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter.
If ACLs are enabled, the client will need to supply an ACL Token with query
write privileges for the Name of the query being deleted.
No body is required as part of this request.
If the API call succeeds, a 200 status code is returned.
/v1/query/<query or name>/execute
The query execute endpoint supports only the GET method and is used to
execute a prepared query. The <query or name> argument is the ID or name
of an existing prepared query.
By default, the datacenter of the agent is queried; however, the dc can be
provided using the "?dc=" query parameter. This endpoint does not support
blocking queries, but it does support all consistency modes.
Adding the optional "?near=" parameter with a node name will sort the resulting list in ascending order based on the estimated round trip time from that node. Passing "?near=_agent" will use the agent's node for the sort. If this is not present, then the nodes will be shuffled randomly and will be in a different order each time the query is executed.
An optional "?limit=" parameter can be used to limit the size of the list to the given number of nodes. This is applied after any sorting or shuffling.
If an ACL Token was bound to the query when it was defined then it will be used when executing the request. Otherwise, the client's supplied ACL Token will be used.
No body is required as part of this request.
If the query does not exist then a 404 status code will be returned. Otherwise, a JSON body will be returned like this:
{
"Service": "redis",
"Nodes": [
{
"Node": {
"Node": "foobar",
"Address": "10.1.10.12"
},
"Service": {
"ID": "redis",
"Service": "redis",
"Tags": null,
"Port": 8000
},
"Checks": [
{
"Node": "foobar",
"CheckID": "service:redis",
"Name": "Service 'redis' check",
"Status": "passing",
"Notes": "",
"Output": "",
"ServiceID": "redis",
"ServiceName": "redis"
},
{
"Node": "foobar",
"CheckID": "serfHealth",
"Name": "Serf Health Status",
"Status": "passing",
"Notes": "",
"Output": "",
"ServiceID": "",
"ServiceName": ""
}
],
"DNS": {
"TTL": "10s"
},
"Datacenter": "dc3",
"Failovers": 2
}]
}
The Nodes section contains the list of healthy nodes providing the given
service, as specified by the constraints of the prepared query.
Service has the service name that the query was selecting. This is useful
for context in case an empty list of nodes is returned.
DNS has information used when serving the results over DNS. This is just a
copy of the structure given when the prepared query was created.
Datacenter has the datacenter that ultimately provided the list of nodes
and Failovers has the number of remote datacenters that were queried
while executing the query. This provides some insight into where the data
came from. This will be zero during non-failover operations where there
were healthy nodes found in the local datacenter.