In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
1. The grid based unhealthy cards are now clamped to only four wide
maximum. This means that on larger screen the cards are much wider
meaning you can view more information. Grid gutters are also clamped at
a certain ideal width screen, remaining responsive for anything below
this.
2. The healthy node columns are finally responsive following the same
column rules as unhealthy nodes
Various ember addons produced deprecation messages, some in the browser
console and some in terminal. Upgrading and replacing some of these has
reduced this.
Upgrades:
- ember-collection
- ember-computed-style
Replacements:
- ember-pluralize replaced with ember-inflector
- ember-cli-format-number replaced with custom helper using standard
`toLocaleString`
Removing ember-cli-format-number also meant some further changes related
to decimal places in the tomography graph, done using `toFixed`
The ExternalSources background-images have also now been escaped
correctly preventing in-development `console` warnings.
The only deprecation warnings are now from ember-block-slots, only in
terminal, making for a better development experience overall, especially now we
have an empty browser console
Also adds a `callIfType` 'helper util' which is a util specifically for helpers (it conforms to a helper argument signature) to be expanded upon later.
1. The 'Services' header need to be knocked ot the right slightly to line
up properly with the service name when there are no external source
icons.
2. Add a single space between ServiceName and ServiceID on the Node >
[Services] tab table.
* Move almost everything to use %frames
* Fix pill styles of ACL types
* Remove horizontal scrollbars from dom recycling scroller component
* Make text areas look ok in Firefox
* Remove ember-bulma-css
* New form elements, break out %toggle
* %button design tweaks
* %form-element design tweaks
* Better hashicorp logo
* Small screen CSS improvements (#4624)
1. Reduce header size when there are no breadcrumbs
2. Make the filters toggleable, closed by default
3. Reduce the size of the footer on small screens
4. Hide all non-primary columns for forms
5. Slightly change the layout of various items, mainly buttons within
forms
6. Make some confirmation dialogs work vertically on small screens. Guessing we might be better just using native confirmations on small
screens
1. Addition of external source icons for services marked as such.
2. New %with-tooltip css component (wip)
3. New 'no healthcheck' icon as external sources might not have
healthchecks, also minus icon on node cards in the service detail view
4. If a service doesn't have healthchecks, we use the [Services] tabs as the
default instead of the [Health Checks] tab in the Service detail page.
5. `css-var` helper. The idea here is that it will eventually be
replaced with pure css custom properties instead of having to use JS. It
would be nice to be able to build the css variables into the JS at build
time (you'd probably still want to specify in config which variables you
wanted available in JS), but that's possible future work.
Lastly there is probably a tiny bit more testing edits here than usual,
I noticed that there was an area where the dynamic mocking wasn't
happening, it was just using the mocks from consul-api-double, the mocks
I was 'dynamically' setting happened to be the same as the ones in
consul-api-double. I've fixed this here also but it wasn't effecting
anything until actually made certain values dynamic.
When adding an auto resizing (heightwise) code editor, the
ivy-codemirror plugin seems to do this using more nested divs. This div
had a horizontal scroller but couldn't be seen on some platforms (with
hidden scrollbars). This commit makes the code editor slightly more
usable and more visually correct by removing the scroll bar in this div
to stop producing the 'split view look', yet keeping the horizontal
scroller at the bottom of the code editor for when you enter code that
is wider than the area. A max-width has also been added here to prevent
the text area from growing off the side of the page.
Another improvement to the code editor here is the addition of a nicer
color for hightlighting text selection so its at least visible.
Lastly, there was a way you could get the bottom horizontal scrollbar to overlay
the code in the editor. This makes sure there is always some space at
the bottom of the editor to make sure the code won't be obscured
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
WIP Unskip some lower level trivial tests.
This is the beginning of work to unskip some of the more trivial tests that I'd skipped a while back (if the thing they are testing broke, they would have failed higher up in other acceptance tests).
I'd rather keep the tests, as they do test things in a more isolated manner, and the plan was to always come back and work to unskip them time allowing.
I didn't get to far into this work in progress here, but I'd rather merge what I've done all the same and come back at a later date and continue.
1. In the Services > Services detail page for both healthy and unhealthy
nodes, also add searching by Service.ID here
2. In the Nodes > Node detail > [Services] tab only if its different
from the Service name, add searching by Service.ID here
1. There are various things tests that can just have intentions added
into them, like filters and such like, add intentions to these
2. Start thinking about being able to negate steps easily, which will
lead on to a cleanup of the steps
This enables people to enter things using the mouse to paste for
example, plus possible other things.
As an aside it also answers my query regarding `fillIn` for testing,
nothing needs to be actually _typed_ anymore! Doh
1. Use 'All Services (*)' as opposed to '*'
2. Set 'Destination' in teh same bold font as 'Source'
3. Ensure you can search for all services by using '*' or 'All Services
(*)'
1. Listing, filtering by action and searching by source name and
destination name
2. Edit/Create page, edits ping the API double fine, need to work through
creates and deletes
3. Currently uses a `Precedence` intention keyname that doesn't yet
exist in the real API
1. Check the dc's model for both dcs list and the requested dc.
2. If the dc model doesn't exist use and empty array for dcs and a fake
dc with the Name 'Error' as we can't even trust what is in the
`paramsFor`
John Cowen