Also accept an RPCInfo instead of interface{}. Accepting an interface
lead to a bug where the caller was expecting the arg to be the response
when in fact it was always passed the request. By accepting RPCInfo
it should indicate that this is actually the request value.
One caller of canRetry already passed an RPCInfo, the second handles
the type assertion before calling canRetry.
A recent change in 1.9.x inverted the order of these two lines, which caused the
X-Consul-Effective-Consistency header to be missing for the servie health endpoints
Only default to the user token and agent token for the sync. Change the
exported methods to only return the stored tokens associated with a
specific check or service.
Also fixes a bug with listing kind=mesh config entries. ValidateConfigEntryKind was only being used by
the List endpoint, and was yet another place where we have to enumerate all the kinds.
This commit removes ValidateConfigEntryKind and uses MakeConfigEntry instead. This change removes
the need to maintain two separate functions at the cost of creating an instance of the config entry which will be thrown away immediately.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Previously we would associate the address of a discovery chain target
with the discovery chain's filter chain. This was broken for a few reasons:
- If the upstream is a virtual service, the client proxy has no way of
dialing it because virtual services are not targets of their discovery
chains. The targets are distinct services. This is addressed by watching
the endpoints of all upstream services, not just their discovery chain
targets.
- If multiple discovery chains resolve to the same target, that would
lead to multiple filter chains attempting to match on the target's
virtual IP. This is addressed by only matching on the upstream's virtual
IP.
NOTE: this implementation requires an intention to the redirecting
virtual service and not just to the final destination. This is how
we can know that the virtual service is an upstream to watch.
A later PR will look into traversing discovery chains when computing
upstreams so that intentions are only required to the discovery chain
targets.
* WIP reloadable raft config
* Pre-define new raft gauges
* Update go-metrics to change gauge reset behaviour
* Update raft to pull in new metric and reloadable config
* Add snapshot persistance timing and installSnapshot to our 'protected' list as they can be infrequent but are important
* Update telemetry docs
* Update config and telemetry docs
* Add note to oldestLogAge on when it is visible
* Add changelog entry
* Update website/content/docs/agent/options.mdx
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
* Give descriptive error if auth method not found
Previously during a `consul login -method=blah`, if the auth method was not found, the
error returned would be "ACL not found". This is potentially confusing
because there may be many different ACLs involved in a login: the ACL of
the Consul client, perhaps the binding rule or the auth method.
Now the error will be "auth method blah not found", which is much easier
to debug.
Initially we were loading every potential upstream address into Envoy
and then routing traffic to the logical upstream service. The downside
of this behavior is that traffic meant to go to a specific instance
would be load balanced across ALL instances.
Traffic to specific instance IPs should be forwarded to the original
destination and if it's a destination in the mesh then we should ensure
the appropriate certificates are used.
This PR makes transparent proxying a Kubernetes-only feature for now
since support for other environments requires generating virtual IPs,
and Consul does not do that at the moment.
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.
In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:
> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.
For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.
Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
This ensures that if someone does include some extension Consul does not currently make use of, that extension is actually usable. Without linking these envoy protobufs into the main binary it can't round trip the escape hatches to send them down to envoy.
Whenenver the go-control-plane library is upgraded next we just have to re-run 'make envoy-library'.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.
Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
Previous getFromView would call view.Result when the result may not have been returned
(because the index is updated past the minIndex. This would allocate a slice and sort it
for no reason, because the values would never be returned.
Fix this by re-ordering the operations in getFromView.
The test changes in this commit were an attempt to cover the case where
an update is received but the index does not exceed the minIndex.
Also rename it to readEntry now that it doesn't return the entire entry. Based on feedback
in PR review, the full entry is not used by the caller, and accessing the fields wouldn't be
safe outside the lock, so it is safer to return only the Materializer
grpclog.SetLoggerV2 is meant to be called only once before any gRPC requests are received, but
each test that uses TestAgent will call NewBaseDeps again. Use a sync.Once to prevent the grpc
logging from being re-initialized by each test.
This will mean that a test can't use a fake logger to capture logs from the gRPC server.
These tests can flake when we get a notification for an earlier event.
Retry the read from update channel a few times to make sure we get the
event we expect.
Split the TestStreamingClient into the two logical components the real
client uses. This allows us to test multiple clients properly.
Previously writing of ctx from multiple Subscribe calls was showing a
data race.
Once this was fixed a test started to fail because the request had to be
made with a greater index, so that the store.Get call did not return
immediately.
The idleTTL was being written and read concurrently. Instead move the idleTTL to a struct
field so that when one test patches the TTL it does not impact others.
The background goroutines for the store can outlive a test because context cancellation
is async.
Setting this field to a value is equivalent to using the 'near' query paramter.
The intent is to sort the results by proximity to the node requesting
them. However with connect we send the results to envoy, which doesn't
care about the order, so setting this field is increasing the work
performed for no gain.
It is necessary to unset this field now because we would like connect
to use streaming, but streaming does not support sorting by proximity.
Remove View.Result error return value, it was always nil, and seems like it will likely always remain nill
since it is simply reading a stored value.
Also replace some cache types with local types.
And only start expiration time when the last request ends. This makes tracking expiry simpler, and
ensures that no entry can be expired while there are active requests.
Previously canRetry was attempting to retrieve this error from args, however there was never
any callers that would pass an error to args.
With the change to raftApply to move this error to the error return value, it is now possible
to receive this error from the err argument.
This commit updates canRetry to check for ErrChunkingResubmit in err.
Previously we were inconsistently checking the response for errors. This
PR moves the response-is-error check into raftApply, so that all callers
can look at only the error response, instead of having to know that
errors could come from two places.
This should expose a few more errors that were previously hidden because
in some calls to raftApply we were ignoring the response return value.
Also handle errors more consistently. In some cases we would log the
error before returning it. This can be very confusing because it can
result in the same error being logged multiple times. Instead return
a wrapped error.
Previously only a single auth method would be saved to the snapshot. This commit fixes the typo
and adds to the test, to show that all auth methods are now saved.
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
The zero value of these flags was already being excluded in the xDS
generation of circuit breaker/outlier detection config.
See: makeThresholdsIfNeeded and ToOutlierDetection.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
* add http2 ping checks
* fix test issue
* add h2ping check to config resources
* add new test and docs for h2ping
* fix grammatical inconsistency in H2PING documentation
* resolve rebase conflicts, add test for h2ping tls verification failure
* api documentation for h2ping
* update test config data with H2PING
* add H2PING to protocol buffers and update changelog
* fix typo in changelog entry
* Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled.
* Add new iptables package for applying traffic redirection rules with iptables.
* Fix bug in cache where TTLs are effectively ignored
This mostly affects streaming since streaming will immediately return from Fetch calls when the state is Closed on eviction which causes the race condition every time.
However this also affects all other cache types if the fetch call happens to return between the eviction and then next time around the Get loop by any client.
There is a separate bug that allows cache items to be evicted even when there are active clients which is the trigger here.
* Add changelog entry
* Update .changelog/9978.txt
Synthetic upstreams from service-defaults config are stored locally in
the Upstreams list. Since these come from service-defaults they should
be cleaned up locally when no longer present in the service config
response.
This is needed in case the client proxy is in TransparentProxy mode.
Typically they won't have explicit configuration for every upstream, so
this ensures the settings can be applied to all of them when generating
xDS config.
New clients in transparent proxy mode can send requests for service
config resolution without any upstream args because they do not have
explicitly defined upstreams.
Old clients on the other hand will never send requests without the
Upstreams args unless they don't have upstreams, in which case we do not
send back upstream config.
The streaming cache type for service health has no way to handle v1/health/ingress/:service queries as there is no equivalent topic that would return the appropriate data.
Ensure that attempts to use this endpoint will use the old cache-type for now so that they return appropriate data when streaming is enabled.
As part of this change the indexer will now be case insensitive by using
the lower case value. This should be safe because previously we always
had lower case strings.
This change was made out of convenience. All the other indexers use
lowercase, so we can re-use the indexFromQuery function by using
lowercase here as well.
This bug would result in the UI not having the correct settings in
Consul enterprise, which could produce many warnings in the logs.
This bug occured because the index page, which includes a map of configuration
was rendered when the HTTPHandler is first created. This PR changes the
UIServer to instead render the index page when the page is requested.
The rendering does not appear to be all that expensive, so rendering it
when requested should not cause much extra latency.
Previously we were encoding the UUID as a string, but the index it references uses a UUID
so this index can also use an encoded UUID to save a bit of memory.
Prefix queries are generally being used to match part of a partial
index. We can support these indexes by using a function that accept
different types for each subset of the index.
What I found interesting is that in the generic StringFieldIndexer the
implementation for PrefixFromArgs would remove the trailing null, but
at least in these 2 cases we actually want a null terminated string.
We simply want fewer components in the string.
Some TLS servers require SNI, but the Golang HTTP client doesn't
include it in the ClientHello when connecting to an IP address. This
change adds a new TLSServerName field to health check definitions to
optionally set it. This fixes#9473.
The TestServiceHealthEventsFromChanges function was over 1400 lines.
Attempting to debug test failures in test functions this large is
difficult. It requires scrolling to the line which defines the testcase
because the failure message only includes the line number of the
assertion, not the line number of the test case.
This is an excellent example of where test tables stop working well, and
start being a problem. To mitigate this problem, the runCase pattern can
be used. When one of these tests fails, a failure message will print the
line number of both the test case and the assertion. This allows a
developer to quickly jump to both of the relevant lines, signficanting
reducing the time it takes to debug test failures.
For example, one such failure could look like this:
catalog_events_test.go:1610: case: service reg, new node
catalog_events_test.go:1605: assertion failed: values are not equal
ResolveServiceConfig is called by service manager before the proxy
registration is in the catalog. Therefore we should pass proxy
registration flags in the request rather than trying to fetch
them from the state store (where they may not exist yet).
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
This enables it to be called for many upstreams or downstreams of a
service while only querying intentions once.
Additionally, decisions are now optionally denied due to L7 permissions
being present. This enables the function to be used to filter for
potential upstreams/downstreams of a service.
Previously this type was defined in structs, but unlike the other types in structs this type
is not used by RPC requests. By moving it to state we can better indicate that this is not
an API type, but part of the state implementation.
I added this recently without realizing that the method already existed and was named
NamespaceOrEmpty. Replace all calls to GetNamespace with NamespaceOrEmpty or NamespaceOrDefault
as appropriate.
Document that this comparison should roughly match MatchesKey
Only sort by overrideKey or service name, but not both
Add namespace to the sort.
The client side also builds a map of these based on the namespace/node/service key, so the only order
that really matters is the ordering of register/dereigster events.
Refactored out a function that can be used for both the snapshot and stream of events to translate
an event into an appropriate connect event.
Previously terminating gateway events would have used the wrong key in the snapshot, which would have
caused them to be filtered out later on.
Also removed an unused function, and some commented out code.
Health of a terminating gateway instance changes
- Generate an event for creating/destroying this instance of the terminating gateway,
duplicate it for each affected service
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
Previous to this commit, the API response would include Gateway
Addresses in the form `domain.name.:8080`, which due to the addition of
the port is probably not the expected response.
This commit rightTrims any `.` characters from the end of the domain
before formatting the address to include the port resulting in
`domain.name:8080`
Since we currently do no version switching this removes 75% of the PR
noise.
To generate all *.golden files were removed and then I ran:
go test ./agent/xds -update
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
When de-registering in anti-entropy sync, when there is no service or
check token.
The agent token will fall back to the default (aka user) token if no agent
token is set, so the existing behaviour still works, but it will prefer
the agent token over the user token if both are set.
ref: https://www.consul.io/docs/agent/options#acl_tokens
The agent token seems more approrpiate in this case, since this is an
"internal operation", not something initiated by the user.
These new functional indexers provide a few advantages:
1. enterprise differences can be isolated to a single function (the
indexer function), making code easier to change
2. as a consequence of (1) we no longer need to wrap all the calls to
Txn operations, making code easier to read.
3. by removing reflection we should increase the performance of all
operations.
One important change is in making all the function signatures the same.
https://blog.golang.org/errors-are-values
An extra boolean return value for SingleIndexer.FromObject is superfluous.
The error value can indicate when the index value could not be created.
By removing this extra return value we can use the same signature for both
indexer functions.
This has the nice properly of a function being usable for both indexing operations.
By using a new pattern for more specific indexes. This allows us to use
the same index for both service checks and node checks. It removes the
abstraction around memdb.Txn operations, and isolates all of the
enterprise differences in a single place (the indexer).
* A GET of the /acl/auth-method/:name endpoint returns the fields
MaxTokenTTL and TokenLocality, while a LIST (/acl/auth-methods) does
not.
The list command returns a filtered subset of the full set. This is
somewhat deliberate, so that secrets aren't shown, but the TTL and
Locality fields aren't (IMO) security critical, and it is useful for
the front end to be able to show them.
For consistency these changes mirror the 'omit empty' and string
representation choices made for the GET call.
This includes changes to the gRPC and API code in the client.
The new output looks similar to this
curl 'http://localhost:8500/v1/acl/auth-methods' | jq '.'
{
"MaxTokenTTL": "8m20s",
"Name": "minikube-ttl-local2",
"Type": "kubernetes",
"Description": "minikube auth method",
"TokenLocality": "local",
"CreateIndex": 530,
"ModifyIndex": 530,
"Namespace": "default"
}
]
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Add changelog
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Replace the large table of tests with individual calls to run(). By using
runCase, failure messages will include the line number for the test case, as
well as a line number from the test functions.
Example:
=== FAIL: agent/config TestLoad_IntegrationWithFlags/failing_case (0.01s)
runtime_test.go:4721: case: failing case
runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"
Previous:
runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"
Without the line number to the testCase data, debugging these tests is
difficult. It is impossible to jump directly to the test case, and
difficult to find the location because of many similarly named cases.
AEInterval is overridden by NonUserSource, so there is no way for a user
to set this value. These two cases represented impossible real world
scenarios.
Instead the test is replaced with one that shows that the AEInterval can
not be set by config.
This change allows us to remove the hcltail and jsontail fields from
testCase
Previously a snapshot created as part of a resumse-stream request could have incorrectly
cached the newSnapshotToFollow event. This would cause clients to error because they
received an unexpected framing event.
So that all the client side filtering is in the same place. Previously
only the bexpr filter was in the cache-entry.
Also makes a small change to the filtering so that instead of rebuilding
slices of items, the filtering can return a bool to determine if the
event payload is saved or not.
Send empty array [] instead of [""] in DNS requests when TagFilter is not set
Do not change case sensitivity of services anymore in `getServiceNodes()` since
cache keys are now case insensitive
10 minutes is the default blocking query timeout. Using the same value results in us hitting
the expired cache entry bug frequently. By extending this TTL we at least mitigate the problem.
The underlying bug still needs to be fixed.
The materializer is often reset when an error is received. By resetting
the retryWaiter we effectively never wait. The retryWaiter should only
be reset when we get an event without error. This is done in
Materializer.updateView().
Streaming can not be used for these queries because the near query
paramter indicates a specific sort of the results, and that sort
requires data that is not available to the client from the streaming
API.
This fixes an issue where leaf certificates issued in primary
datacenters using Vault as a Connect CA would be reissued very
frequently (every ~20 seconds) because the logic meant to detect root
rotation was errantly triggering.
The hash of the rootCA was being compared against a hash of the
intermediateCA and always failing. This doesn't apply to the Consul
built-in CA provider because there is no intermediate in use in the
primary DC.
This is reminiscent of #6513
In a situation where the mesh gateway is configured to bind to multiple
network interfaces, we use a feature called 'tagged addresses'.
Sometimes an address is duplicated across multiple tags such as 'lan'
and 'lan_ipv4'.
There is code to deduplicate these things when creating envoy listeners,
but that code doesn't ensure that the same tag wins every time. If the
winning tag flaps between xDS discovery requests it will cause the
listener to be drained and replaced.
registerSchema creates some indirection which is not necessary in this
case. newDBSchema can call each of the tables.
Enterprise tables can be added from the existing withEnterpriseSchema
shim.
Deadlock scenario:
1. Due to scheduling, the state runner sends one snapshot into
snapCh and then attempts to send a second. The first send succeeds
because the channel is buffered, but the second blocks.
2. Separately, Manager.Watch is called by the xDS server after
getting a discovery request from Envoy. This function acquires the
manager lock and then blocks on receiving the CurrentSnapshot from
the state runner.
3. Separately, there is a Manager goroutine that reads the snapshots
from the channel in step 1. These reads are done to notify proxy
watchers, but they require holding the manager lock. This goroutine
goes to acquire that lock, but can't because it is held by step 2.
Now, the goroutine from step 3 is waiting on the one from step 2 to
release the lock. The goroutine from step 2 won't release the lock until
the goroutine in step 1 advances. But the goroutine in step 1 is waiting
for the one in step 3. Deadlock.
By making this send non-blocking step 1 above can proceed. The coalesce
timer will be reset and a new valid snapshot will be delivered after it
elapses or when one is requested by xDS.
This allows setting ForceWithoutCrossSigning when reconfiguring the CA
for any provider, in order to forcibly move to a new root in cases where
the old provider isn't reachable or able to cross-sign for whatever
reason.
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.
* use separate files in testdata/ dir to store the config source.
Separate files are much easier to edit because editors can syntax
highlight json/hcl, and it makes strings easier to find. Previously
trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
nonZero works.
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.
The three arguments are reduced to a single argument by moving the other
two into the options struct.
The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
Previously the ServiceManager had to run a separate goroutine so that it could block on a channel
send/receive instead of a lock. Using this mutex with TryLock allows us to cancel the lock when
the serviceConfigWatch is stopped.
Without this change removing the ServiceManager.Start goroutine would not be possible because
when AddService is called it acquires the stateLock. While that lock is held, if there are
existing watches for the service, the old watch will be stopped, and the goroutine holding the
lock will attempt to wait for that watcher goroutine to exit.
If the goroutine is handling an update (serviceConfigWatch.handleUpdate) then it can block on
acquiring the stateLock and deadlock the agent. With this change the context is cancelled as
and the goroutine will exit instead of waiting on the stateLock.
The ServiceManager.Start goroutine was used to serialize calls to
agent.addServiceInternal.
All the goroutines which sent events to the channel would block waiting
for a response from that same goroutine, which is effectively the same
as a synchronous call without any channels.
This commit removes the goroutine and channels, and instead calls
addServiceInternal directly. Since all of these goroutines will need to
take the agent.stateLock, the mutex handles the serializing of calls.
Move the field into the struct for addServiceLocked. Also don't require
setting a default value, so that the callers can leave it as nil if they
don't already have a snapshot.
Replace with the existing AddServiceRequest struct. These structs are
almost identical. Additionally, the only reason the serviceRegistration
struct existed was to recreate an AddServiceRequest.
By storing and re-using the AddServiceRequest we remove the need to
translate into one type and back to the original type.
We also remove the extra parameters to a function, because those values
are already available from the AddServiceRequest field.
Also a minor optimization to only call tokens.AgentToken() when
necessary. Previous it was being called every time, but the value was
being ignored if the AddServiceRequest had a token.
Handle the decision to use ServiceManager in a single place. Instead of
calling ServiceManager.AddService, then calling back into
addServiceInternal, only call ServiceManager.AddService if we are going
to use it.
This change removes some small duplication and removes a branch from the
AddService flow.
The temprorary variables make it much harder to trace where and how struct
fields are used. If a field is only used a small number of times than
refer to the field directly.
The method is only used in tests, and only exists for legacy calls.
There was one other package which used this method in tests. Export
the AddServiceRequest and a couple of its fields so the new function can
be used in those tests.
This way we only have to wait for the serf barrier to pass once before
we can make use of federation state APIs Without this patch every
restart needs to re-compute the change.
* Add templating to inject JSON into an application/json script tag
Plus an external script in order to pick it out and inject the values we
need injecting into ember's environment meta tag.
The UI still uses env style naming (CONSUL_*) but we uses the new style
JSON/golang props behind the scenes.
Co-authored-by: Paul Banks <banks@banksco.de>
In some circumstances this endpoint will have no results in it (dues to
ACLs, Namespaces, filtering or missing configuration).
This ensures that the response is at least an empty array (`[]`) rather
than `null`
These expectations are optional because in a slow CI environment the deadline to cancell the context might occur before the go routine reaches issuing the RPC. Either way we are successfully ensuring context cancellation is working.
Deleting from memdb inside an interation can cause a panic from Iterator.Next. This
case is technically safe (for now) because the iterator is using the root radix tree
not a modified one.
However this could break at any time if someone adds an insert or delete to the coordinates table
before this place in the function.
It also sets a bad example, because generally deletes in an interator are not safe. So this
commit uses the pattern we have in other places to move the deletes out of the iteration.
After fixing that bug I uncovered a couple more:
Fix an issue where we might try to cross sign a cert when we never had a valid root.
Fix a potential issue where reconfiguring the CA could cause either the Vault or AWS PCA CA providers to delete resources that are still required by the new incarnation of the CA.
Using withEnterpriseSchema() we can apply any enterprise schema changes
with a single shim, removing the need to duplicate all of the table
definitions.
Also move all the catalog schemas to a new file to shrink catalog.go a bit.
I believe this commit also fixes a bug. Previously RPCMaxConnsPerClient was not being re-read from the RuntimeConfig, so passing it to Server.ReloadConfig was never changing the value.
Also improve the test runtime by not doing a lot of unnecessary work.
The field was not being included in the cache info key. This would result in a DNS request for
web.service.consul returning the same result as web.ingress.consul, when those results should
not be the same.
include all fields when fuzzing in tests
split tests by struct type
Ensure the new value for the field is different
fuzzer.Fuzz could produce the same value again in some cases.
Use a custom fuzz function for QueryOptions. That type is an embedded struct in the request types
but only one of the fields is important to include in the cache key.
Move enterpriseMetaField to an oss file so that we can change it in enterprise.
* Fix bug in usage metrics that caused a negative count to occur
There were a couple of instances were usage metrics would do the wrong
thing and result in incorrect counts, causing the count to attempt to
decrement below zero and return an error. The usage metrics did not
account for various places where a single transaction could
delete/update/add multiple service instances at once.
We also remove the error when attempting to decrement below zero, and
instead just make sure we do not accidentally underflow the unsigned
integer. This is a more graceful failure than returning an error and not
allowing a transaction to commit.
* Add changelog
This change allows us to re-use these functions in other places without the Builder, and makes it
more explicit about which functions can warn/error and which can not.
A golden file makes the expected value easier to work with. This change also
removes a number of shims for enterprise and replaces them with a single one
for the golden filename.
* Display a warning when rpc.enable_streaming = true is set on a client
This option has no effect when running as an agent
* Added warning when server starts with use_streaming_backend but without rpc.enable_streaming
* Added unit test
It is no safe to assumes that the mapstructure keys will contain all the keys because some config can be specified
with command line flags or literals.
This change allows us to remove the json marshal/unmarshal cycle for command line flags, which will allow
us to remove all of the hcl/json struct tags on config fields.
These types are used as values (not pointers) in other structs. Using a pointer receiver causes
problems when the value is printed. fmt will not call the String method if it is passed a value
and the String method has a pointer receiver. By using a value receiver the correct string is printed.
Also remove some unused methods.
TestEnvoy.Close used e.stream.recvCh == nil to indicate the channel had already
been closed, so that TestEnvoy.Close can be called multiple times. The recvCh
was not protected by a lock, so setting it to nil caused a data race with any
goroutine trying to read from the channel.
Instead set the stream to nil. The stream is guarded by a lock, so it does not race.
This change allows us to test the agent/xds package using -race.
This way we only have to wait for the serf barrier to pass once before
we can upgrade to v2 acls. Without this patch every restart needs to
re-compute the change, and potentially if a stray older node joins after
a migration it might regress back to v1 mode which would be problematic.
This can happen when one other node in the cluster such as a client is unable to communicate with the leader server and sees it as failed. When that happens its failing status eventually gets propagated to the other servers in the cluster and eventually this can result in RPCs returning “No cluster leader” error.
That error is misleading and unhelpful for determing the root cause of the issue as its not raft stability but rather and client -> server networking issue. Therefore this commit will add a new error that will be returned in that case to differentiate between the two cases.
In some circumstances this endpoint will have no results in it (dues to
ACLs, Namespaces or filtering).
This ensures that the response is at least an empty array (`[]`) rather
than `null`
HTTPUseCache is only used is a gate for allowing QueryOptions.UseCache to be enabled. By
moving it to the place where the query options are set, this behaviour is more obvious.
Also remove parseInternal which was an alias for parse.
Previously the tokens would fail to insert into the secondary's state
store because the AuthMethod field of the ACLToken did not point to a
known auth method from the primary.
* create consul version metric with version label
* agent/agent.go: add pre-release Version as well as label
Co-Authored-By: Radha13 <kumari.radha3@gmail.com>
* verion and pre-release version labels.
* hyphen/- breaks prometheus
* Add Prometheus gauge defintion for version metric
* Add new metric to telemetry docs
Co-authored-by: Radha Kumari <kumari.radha3@gmail.com>
Co-authored-by: Aestek <thib.gilles@gmail.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
* server: fix panic when deleting a non existent intention
* add changelog
* Always return an error when deleting non-existent ixn
Co-authored-by: freddygv <gh@freddygv.xyz>
And remove the devMode field from builder.
This change helps make the Builder state more explicit by moving inputs to the BuilderOps struct,
leaving only fields that can change during Builder.Build on the Builder struct.
Using the LiteralSource makes it much easier to find default values, because an IDE reports
the location of a default. With an HCL string they are harder to discover.
Also removes unnecessary mapstructure.Decodes of constant values.
A vulnerability was identified in Consul and Consul Enterprise (“Consul”) such that operators with `operator:read` ACL permissions are able to read the Consul Connect CA configuration when explicitly configured with the `/v1/connect/ca/configuration` endpoint, including the private key. This allows the user to effectively privilege escalate by enabling the ability to mint certificates for any Consul Connect services. This would potentially allow them to masquerade (receive/send traffic) as any service in the mesh.
--
This PR increases the permissions required to read the Connect CA's private key when it was configured via the `/connect/ca/configuration` endpoint. They are now `operator:write`.
Previously the listener was being passed to a closure in a loop without
capturing the loop variable. The result is only the last listener is
used, so the http/https servers only listen on one address.
This problem is fixed by capturing the variable by passing it into a
function.
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
* ci: stop building darwin/386 binaries
Go 1.15 drops support for 32-bit binaries on Darwin https://golang.org/doc/go1.15#darwin
* tls: ConnectionState::NegotiatedProtocolIsMutual is deprecated in Go 1.15, this value is always true
* correct error messages that changed slightly
* Completely regenerate some TLS test data
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
The Intention.Apply RPC is quite large, so this PR attempts to break it down into smaller functions and dissolves the pre-config-entry approach to the breakdown as it only confused things.
Header is: X-Consul-Default-ACL-Policy=<allow|deny>
This is of particular utility when fetching matching intentions, as the
fallthrough for a request that doesn't match any intentions is to
enforce using the default acl policy.
Most packages should pass the race detector. An exclude list ensures
that new packages are automatically tested with -race.
Also fix a couple small test races to allow more packages to be tested.
Returning readyCh requires a lock because it can be set to nil, and
setting it to nil will race without the lock.
Move the TestServer.Listening calls around so that they properly guard
setting TestServer.l. Otherwise it races.
Remove t.Parallel in a small package. The entire package tests run in a
few seconds, so t.Parallel does very little.
In auto-config, wait for the AutoConfig.run goroutine to stop before
calling readPersistedAutoConfig. Without this change there was a data
race on reading ac.config.
defaultMetrics was being set at package import time, which meant that it received an instance of
the original default. But lib/telemetry.InitTelemetry sets a new global when it is called.
This resulted in the metrics being sent nowhere.
This commit changes defaultMetrics to be a function, so it will return the global instance when
called. Since it is called after InitTelemetry it will return the correct metrics instance.
The Catalog, Config Entry, KV and Session resources potentially re-validate the input as its coming in. We need to prevent snapshot restoration failures due to missing namespaces or namespaces that are being deleted in enterprise.
This ensures the metrics proxy endpoint is ACL protected behind a
wildcard `service:read` and `node:read` set of rules. For Consul
Enterprise these will need to span all namespaces:
```
service_prefix "" { policy = "read" }
node_prefix "" { policy = "read" }
namespace_prefix "" {
service_prefix "" { policy = "read" }
node_prefix "" { policy = "read" }
}
```
This PR contains just the backend changes. The frontend changes to
actually pass the consul token header to the proxy through the JS plugin
will come in another PR.
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.
Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
1. do a state store query to list intentions as the agent would do over in `agent/proxycfg` backing `agent/xds`
2. upgrade the database and do a fresh `service-intentions` config entry write
3. the blocking query inside of the agent cache in (1) doesn't notice (2)
Makes Payload a type with FilterByKey so that Payloads can implement
filtering by key. With this approach we don't need to expose a Namespace
field on Event, and we don't need to invest micro formats or require a
bunch of code to be aware of exactly how the key field is encoded.
The output of the previous assertions made it impossible to debug the tests without code changes.
With go-cmp comparing the entire slice we can see the full diffs making it easier to debug failures.
Gauge metrics are great for understanding the current state, but can somtimes hide problems
if there are many disconnect/reconnects.
This commit adds counter metrics for connections and streams to make it easier to see the
count of newly created connections and streams.
Instead of using retry.Run, which appears to have problems in some cases where it does not
emit an error message, use a for loop.
Increase the number of attempts and remove any sleep, since this operation is not that expensive to do
in a tight loop
Closing l.conns can lead to a race and a 'panic: send on closed chan' when a
connection is in the middle of being handled when the server is shutting down.
Found using '-race -count=800'
* Plumb Datacenter and Namespace to metrics provider in preparation for them being usable.
* Move metrics loader/status to a new component and show reason for being disabled.
* Remove stray console.log
* Rebuild AssetFS to resolve conflicts
* Yarn upgrade
* mend
Previously config entries sharing a kind & name but in different
namespaces could occasionally cause "stuck states" in replication
because the namespace fields were ignored during the differential
comparison phase.
Example:
Two config entries written to the primary:
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
Under the covers these both get saved to memdb, so they are sorted by
all 3 components (kind,name,namespace) during natural iteration. This
means that before the replication code does it's own incomplete sort,
the underlying data IS sorted by namespace ascending (bar comes before
foo).
After one pass of replication the primary and secondary datacenters have
the same set of config entries present. If
"kind=A,name=web,namespace=bar" were to be deleted, then things get
weird. Before replication the two sides look like:
primary: [
kind=A,name=web,namespace=foo
]
secondary: [
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
]
The differential comparison phase walks these two lists in sorted order
and first compares "kind=A,name=web,namespace=foo" vs
"kind=A,name=web,namespace=bar" and falsely determines they are the SAME
and are thus cause an update of "kind=A,name=web,namespace=foo". Then it
compares "<nothing>" with "kind=A,name=web,namespace=foo" and falsely
determines that the latter should be DELETED.
During reconciliation the deletes are processed before updates, and so
for a brief moment in the secondary "kind=A,name=web,namespace=foo" is
erroneously deleted and then immediately restored.
Unfortunately after this replication phase the final state is identical
to the initial state, so when it loops around again (rate limited) it
repeats the same set of operations indefinitely.
Required also converting some of the transaction functions to WriteTxn
because TxnRO() called the same helper as TxnRW.
This change allows us to return a memdb.Txn for read-only txn instead of
wrapping them with state.txn.
Prepopulate was setting entry.Expiry.HeapIndex to 0. Previously this would result in a call to heap.Fix(0)
which wasn't correct, but was also not really a problem because at worse it would re-notify.
With the recent change to extract cachettl it was changed to call Update(idx), which would have updated
the wrong entry.
A previous commit removed the setting of entry.Expiry so that the HeapIndex would be reported
as -1, and this commit adds a test and handles the -1 heap index.
And remove duplicate notifications.
Instead of performing the check in the heap implementation, check the
index in the higher level interface (Add,Remove,Update) and notify if one
of the relevant indexes is 0.
Instead of the whole map. This should save a lot of time performing reflecting on a large map.
The filter does not change, so there is no reason to re-apply it to older entries.
This change attempts to make the delay logic more obvious by:
* remove indirection, inline a bunch of function calls
* move all the code and constants next to each other
* replace the two constant values with a single value
* reword the comments.
When a service is deregistered, we check whever matching services were
registered as sidecar along with it and deregister them as well.
To determine if a service is indeed a sidecar we check the
structs.ServiceNode.LocallyRegisteredAsSidecar property. However, to
avoid interal API leakage, it is excluded from JSON serialization,
meaning it is not persisted to disk either.
When the agent is restarted, this property lost and sidecars are no
longer deregistered along with their parent service.
To fix this, we now specifically save this property in the persisted
service file.
* Consul Service meta wrongly computes and exposes non_voter meta
In Serf Tags, entreprise members being non-voters use the tag
`nonvoter=1`, not `non_voter = false`, so non-voters in members
were wrongly displayed as voter.
Demonstration:
```
consul members -detailed|grep voter
consul20-hk5 10.200.100.110:8301 alive acls=1,build=1.8.4+ent,dc=hk5,expect=3,ft_fs=1,ft_ns=1,id=xxxxxxxx-5629-08f2-3a79-10a1ab3849d5,nonvoter=1,port=8300,raft_vsn=3,role=consul,segment=<all>,use_tls=1,vsn=2,vsn_max=3,vsn_min=2,wan_join_port=8302
```
* Added changelog
* Added changelog entry
* Remove unused StatsCard component
* Create Card and Stats contextual components with styling
* Send endpoint, item, and protocol to Stats as props
* WIP basic plumbing for metrics in Ember
* WIP metrics data source now works for different protocols and produces reasonable mock responses
* WIP sparkline component
* Mostly working metrics and graphs in topology
* Fix date in tooltip to actually be correct
* Clean up console.log
* Add loading frame and create a style sheet for Stats
* Various polish fixes:
- Loading state for graph
- Added fake latency cookie value to test loading
- If metrics provider has no series/stats for the service show something that doesn't look broken
- Graph hover works right to the edge now
- Stats boxes now wrap so they are either shown or not as will fit not cut off
- Graph resizes when browser window size changes
- Some tweaks to number formats and stat metrics to make them more compact/useful
* Thread Protocol through topology model correctly
* Rebuild assetfs
* Fix failing tests and remove stats-card now it's changed and become different
* Fix merge conflict
* Update api doublt
* more merge fixes
* Add data-permission and id attr to Card
* Run JS linter
* Move things around so the tests run with everything available
* Get tests passing:
1. Remove fakeLatency setTimeout (will be replaced with CONSUL_LATENCY
in mocks)
2. Make sure any event handlers are removed
* Make sure the Consul/scripts are available before the app
* Make sure interval gets set if there is no cookie value
* Upgrade mocks so we can use CONSUL_LATENCY
* Fix handling of no series values from Prometheus
* Update assetfs and fix a comment
* Rebase and rebuild assetfs; fix tcp metric series units to be bits not bytes
* Rebuild assetfs
* Hide stats when provider is not configured
Co-authored-by: kenia <keniavalladarez@gmail.com>
Co-authored-by: John Cowen <jcowen@hashicorp.com>
Previously, we would emit service usage metrics both with and without a
namespace label attached. This is problematic in the case when you want
to aggregate metrics together, i.e. "sum(consul.state.services)". This
would cause services to be counted twice in that aggregate, once via the
metric emitted with a namespace label, and once in the metric emited
without any namespace label.
This is the recommended proxy integration API for listing intentions
which should not require an active connection to the servers to resolve
after the initial cache filling.
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.
This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
This call appears to only be necessary because reset() was called from
NewMaterializer.
This commit has the constructor set a default value for updateCh, and
removes both the call to reset() from New(), and the call to
notifyUpdateLocked() from reset().
This should ensure that we do not notify the Fetch() call before we have new
values to report.
Refactor of Materializer.Run
Use handlers to manage state in Materializer
Rename Materializer receiver
rename m.l to m.lock, and flip some conditionals to remove the negative.
Improve godoc, rename Deps, move resetErr, and pass err into notifyUpdate
Update for NewSnapshotToFollow events
Refactor to move context cancel out of Materializer
Replace InitFilter with Reset.
Removes the need to store a fatalErr and the cache-type, and removes the need to recreate the filter
each time.
Pass dependencies into MaterializedView.
Remove context from MaterializedView.
Rename state to view.
Rename MaterialziedView to Materialzier.
Rename to NewMaterializer
Pass in retry.Waiter
hc-github-team-consul-core