* remove test splitting from compatibility-integration-tests
* enable on push
* remove ipv6 loopback fix
* re-add ipv6 loopback fix
* remove test splitting from upgrade-integration-tests
* remove test splitting from upgrade-integration-tests
* put test splitting back in for upgrade tests
* upgrade-integration tests-o
ne runner no retries
Fix issue with peer stream node cleanup.
This commit encompasses a few problems that are closely related due to their
proximity in the code.
1. The peerstream utilizes node IDs in several locations to determine which
nodes / services / checks should be cleaned up or created. While VM deployments
with agents will likely always have a node ID, agentless uses synthetic nodes
and does not populate the field. This means that for consul-k8s deployments, all
services were likely bundled together into the same synthetic node in some code
paths (but not all), resulting in strange behavior. The Node.Node field should
be used instead as a unique identifier, as it should always be populated.
2. The peerstream cleanup process for unused nodes uses an incorrect query for
node deregistration. This query is NOT namespace aware and results in the node
(and corresponding services) being deregistered prematurely whenever it has zero
default-namespace services and 1+ non-default-namespace services registered on
it. This issue is tricky to find due to the incorrect logic mentioned in #1,
combined with the fact that the affected services must be co-located on the same
node as the currently deregistering service for this to be encountered.
3. The stream tracker did not understand differences between services in
different namespaces and could therefore report incorrect numbers. It was
updated to utilize the full service name to avoid conflicts and return proper
results.
* update go version to 1.20.3
* add changelog
* rename changelog file to remove underscore
* update to use 1.20.4
* update change log entry to reflect 1.20.4
* upgrade test: use docker.mirror.hashicorp.services to avoid docker login
* upgrade tests: remove docker login
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Bond <danbond@protonmail.com>
* upgrade test: add targetimage name as parameter to upgrade function
- the image name of latest version and target version could be
different. Add the parameter of targetImage to the upgrade
function
* fix a bug of expected error
Remove outdated usage of "Consul Connect" instead of Consul service mesh.
The connect subsystem in Consul provides Consul's service mesh capabilities.
However, the term "Consul Connect" should not be used as an alternative to
the name "Consul service mesh".
When using vault as a CA and generating the local signing cert, try to
enable the PKI endpoint's auto-tidy feature with it set to tidy expired
issuers.
This adds filtering for service-defaults: consul config list -filter 'MutualTLSMode == "permissive"'.
It adds CLI warnings when the CLI writes a config entry and sees that either service-defaults or proxy-defaults contains MutualTLSMode=permissive, or sees that the mesh config entry contains AllowEnablingPermissiveMutualTLSMode=true.
Partitioned downstreams with peered upstreams could not properly merge central config info (i.e. proxy-defaults and service-defaults things like mesh gateway modes) if the upstream had an empty DestinationPartition field in Enterprise.
Due to data flow, if this setup is done using Consul client agents the field is never empty and thus does not experience the bug.
When a service is registered directly to the catalog as is the case for consul-dataplane use this field may be empty and and the internal machinery of the merging function doesn't handle this well.
This PR ensures the internal machinery of that function is referentially self-consistent.
* Persist HCP management token from server config
We want to move away from injecting an initial management token into
Consul clusters linked to HCP. The reasoning is that by using a separate
class of token we can have more flexibility in terms of allowing HCP's
token to co-exist with the user's management token.
Down the line we can also more easily adjust the permissions attached to
HCP's token to limit it's scope.
With these changes, the cloud management token is like the initial
management token in that iit has the same global management policy and
if it is created it effectively bootstraps the ACL system.
* Update SDK and mock HCP server
The HCP management token will now be sent in a special field rather than
as Consul's "initial management" token configuration.
This commit also updates the mock HCP server to more accurately reflect
the behavior of the CCM backend.
* Refactor HCP bootstrapping logic and add tests
We want to allow users to link Consul clusters that already exist to
HCP. Existing clusters need care when bootstrapped by HCP, since we do
not want to do things like change ACL/TLS settings for a running
cluster.
Additional changes:
* Deconstruct MaybeBootstrap so that it can be tested. The HCP Go SDK
requires HTTPS to fetch a token from the Auth URL, even if the backend
server is mocked. By pulling the hcp.Client creation out we can modify
its TLS configuration in tests while keeping the secure behavior in
production code.
* Add light validation for data received/loaded.
* Sanitize initial_management token from received config, since HCP will
only ever use the CloudConfig.MangementToken.
* Add changelog entry
* Move status condition for invalid certifcate to reference the listener
that is using the certificate
* Fix where we set the condition status for listeners and certificate
refs, added tests
* Add changelog
* Add MaxEjectionPercent to config entry
* Add BaseEjectionTime to config entry
* Add MaxEjectionPercent and BaseEjectionTime to protobufs
* Add MaxEjectionPercent and BaseEjectionTime to api
* Fix integration test breakage
* Verify MaxEjectionPercent and BaseEjectionTime in integration test upstream confings
* Website docs for MaxEjectionPercent and BaseEjection time
* Add `make docs` to browse docs at http://localhost:3000
* Changelog entry
* so that is the difference between consul-docker and dev-docker
* blah
* update proto funcs
* update proto
---------
Co-authored-by: Maliz <maliheh.monshizadeh@hashicorp.com>
* TProxy integration test
* Fix GHA compatibility integration test command
Previously, when test splitting allocated multiple test directories to a
runner, the workflow ran `go tests "./test/dir1 ./test/dir2"` which
results in a directory not found error. This fixes that.
This is being added so that metrics sent to HCP can be augmented with the source node's ID.
Opting not to add this to stats_tag out of caution, since it would increase the cardinality of metrics emitted by Envoy for all users.
There is no functional impact to Envoy expected from this change.
* Fix straggler from renaming Register->RegisterTypes
* somehow a lint failure got through previously
* Fix lint-consul-retry errors
* adding in fix for success jobs getting skipped. (#17132)
* Temporarily disable inmem backend conformance test to get green pipeline
* Another test needs disabling
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* fix runner calculation to exclude the top level directory as part of the calculation
* fix the logic for generating the directories/functions
* De-scope tenenacy requirements to OSS only for now. (#17087)
Partition and namespace must be "default"
Peername must be "local"
* Fix virtual services being included in intention topology as downstreams. (#17099)
* Merge pull request #5200 from hashicorp/NET-3758 (#17102)
* Merge pull request #5200 from hashicorp/NET-3758
NET-3758: connect: update supported envoy versions to 1.26.0
* lint
* CI: remove uneeded AWS creds from test-integrations (#17104)
* Update test-integrations.yml
* removing permission lies now that vault is not used in this job.
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* update based on feedback
---------
Co-authored-by: Semir Patel <semir.patel@hashicorp.com>
Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com>
Co-authored-by: Anita Akaeze <anita.akaeze@hashicorp.com>
Co-authored-by: Dan Bond <danbond@protonmail.com>
* normalize status conditions for gateways and routes
* Added tests for checking condition status and panic conditions for
validating combinations, added dummy code for fsm store
* get rid of unneeded gateway condition generator struct
* Remove unused file
* run go mod tidy
* Update tests, add conflicted gateway status
* put back removed status for test
* Fix linting violation, remove custom conflicted status
* Update fsm commands oss
* Fix incorrect combination of type/condition/status
* cleaning up from PR review
* Change "invalidCertificate" to be of accepted status
* Move status condition enums into api package
* Update gateways controller and generated code
* Update conditions in fsm oss tests
* run go mod tidy on consul-container module to fix linting
* Fix type for gateway endpoint test
* go mod tidy from changes to api
* go mod tidy on troubleshoot
* Fix route conflicted reason
* fix route conflict reason rename
* Fix text for gateway conflicted status
* Add valid certificate ref condition setting
* Revert change to resolved refs to be handled in future PR
* added method for converting SamenessGroupConfigEntry
- added new method `ToQueryFailoverTargets` for converting a SamenessGroupConfigEntry's members to a list of QueryFailoverTargets
- renamed `ToFailoverTargets` ToServiceResolverFailoverTargets to distinguish it from `ToQueryFailoverTargets`
* Added SamenessGroup to PreparedQuery
- exposed Service.Partition to API when defining a prepared query
- added a method for determining if a QueryFailoverOptions is empty
- This will be useful for validation
- added unit tests
* added method for retrieving a SamenessGroup to state store
* added logic for using PQ with SamenessGroup
- added branching path for SamenessGroup handling in execute. It will be handled separate from the normal PQ case
- added a new interface so that the `GetSamenessGroupFailoverTargets` can be properly tested
- separated the execute logic into a `targetSelector` function so that it can be used for both failover and sameness group PQs
- split OSS only methods into new PQ OSS files
- added validation that `samenessGroup` is an enterprise only feature
* added documentation for PQ SamenessGroup
Dan Stough