If one isn't included, then the nil check in the formatter never fails due to an empty slice being passed in, which causes the kv output to always get printed.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
With this change, Agent.New() accepts many of the dependencies instead
of creating them in New. Accepting fully constructed dependencies from
a constructor makes the type easier to test, and easier to change.
There are still a number of dependencies created in Start() which can
be addressed in a follow up.
When consul is restarted and an envoy that had already sent
DiscoveryRequests to the previous consul process sends a request to the
new process it doesn't respect the setting and never populates
DiscoveryRequest.Node for the life of the new consul process due to this
bug: https://github.com/envoyproxy/envoy/issues/9682Fixes#8430
Now that it is no longer used, we can remove this unnecessary field. This is a pre-step in cleanup up RuntimeConfig->Consul.Config, which is a pre-step to adding a gRPCHandler component to Server for streaming.
Removing this field also allows us to remove one of the return values from logging.Setup.
Related changes:
- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
Previously, the envoy bootstrap config would blindly copy the self_admin
cluster into the list of static clusters when configuring either
ReadyBindAddr, PrometheusBindAddr, or StatsBindAddr.
Since ingress gateways always configure the ReadyBindAddr property,
users ran into this case much more often than previously.
This provides a user with a better experience, knowing that the command
worked appropriately. The output of the write/delete CLI commands are
not going to be used in a bash script, in fact previously a success
provided no ouput, so we do not have to worry about spurious text being
injected into bash pipelines.
Highlights:
- add new endpoint to query for intentions by exact match
- using this endpoint from the CLI instead of the dump+filter approach
- enforcing that OSS can only read/write intentions with a SourceNS or
DestinationNS field of "default".
- preexisting OSS intentions with now-invalid namespace fields will
delete those intentions on initial election or for wildcard namespaces
an attempt will be made to downgrade them to "default" unless one
exists.
- also allow the '-namespace' CLI arg on all of the intention subcommands
- update lots of docs
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
All commands which read config (agent, services, and validate) will now
print warnings when one of the config files is skipped because it did
not match an expected format.
Also ensures that config validate prints all warnings.
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).
Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
The nil value was never used. We can avoid a bunch of complications by
making the field a string value instead of a pointer.
This change is in preparation for fixing a silent config failure.
Flags is an overloaded term in this context. It generally is used to
refer to command line flags. This struct, however, is a data object
used as input to the construction.
It happens to be partially populated by command line flags, but
otherwise has very little to do with them.
Renaming this struct should make the actual responsibility of this struct
more obvious, and remove the possibility that it is confused with
command line flags.
This change is in preparation for adding additional fields to
BuilderOpts.
This field was populated for one reason, to test that it was empty.
Of all the callers, only a single one used this functionality. The rest
constructed a `Flags{}` struct which did not set Args.
I think this shows that the logic was in the wrong place. Only the agent
command needs to care about validating the args.
This commit removes the field, and moves the logic to the one caller
that cares.
Also fix some comments.
Currently opaque config blocks (config entries, and CA provider config) are
modified by PatchSliceOfMaps, making it impossible for these opaque
config sections to contain slices of maps.
In order to fix this problem, any lazy-decoding of these blocks needs to support
weak decoding of []map[string]interface{} to a struct type before
PatchSliceOfMaps is replaces. This is necessary because these config
blobs are persisted, and during an upgrade an older version of Consul
could read one of the new configuration values, which would cause an error.
To support the upgrade path, this commit first introduces the new hooks
for weak decoding of []map[string]interface{} and uses them only in the
lazy-decode paths. That way, in a future release, new style
configuration will be supported by the older version of Consul.
This decode hook has a number of advantages:
1. It no longer panics. It allows mapstructure to report the error
2. It no longer requires the user to declare which fields are slices of
structs. It can deduce that information from the 'to' value.
3. It will make it possible to preserve opaque configuration, allowing
for structured opaque config.
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.
In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
* Standardize support for Tagged and BindAddresses in Ingress Gateways
This updates the TaggedAddresses and BindAddresses behavior for Ingress
to match Mesh/Terminating gateways. The `consul connect envoy` command
now also allows passing an address without a port for tagged/bind
addresses.
* Update command/connect/envoy/envoy.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* PR comments
* Check to see if address is an actual IP address
* Update agent/xds/listeners.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* fix whitespace
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
* Add support for ingress-gateway in CLI command
- Supports -register command
- Creates a static Envoy listener that exposes only the /ready API so
that we can register a TCP healthcheck against the ingress gateway
itself
- Updates ServiceAddressValue.String() to be more in line with Value()
The envoy version was updated after the PR which added this test was opened, and
merged before the test was merged, so it ended up with the wrong version.
The api client should never rever to HTTP if the user explicitly
requested TLS. This change broke some tests because the tests always use
an non-TLS http server, but some tests explicitly enable TLS.
The new grpcAddress function contains all of the logic to translate the
command line options into the values used in the template.
The new type has two advantages.
1. It introduces a logical grouping of values in the BootstrapTplArgs
struct which is exceptionally large. This grouping makes the struct
easier to understand because each set of nested values can be seen
as a single entity.
2. It gives us a reasonable return value for this new function.
This function now only starts the agent.
Using:
git grep -l 'StartTestAgent(t, true,' | \
xargs sed -i -e 's/StartTestAgent(t, true,/StartTestAgent(t,/g'
This config entry will be used to configure terminating gateways.
It accepts the name of the gateway and a list of services the gateway will represent.
For each service users will be able to specify: its name, namespace, and additional options for TLS origination.
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
* Add Ingress gateway config entry and other relevant structs
* Add api package tests for ingress gateways
* Embed EnterpriseMeta into ingress service struct
* Add namespace fields to api module and test consul config write decoding
* Don't require a port for ingress gateways
* Add snakeJSON and camelJSON cases in command test
* Run Normalize on service's ent metadata
Sadly cannot think of a way to test this in OSS.
* Every protocol requires at least 1 service
* Validate ingress protocols
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* Add ACL CLI commands output format option.
Add command level formatter, that incapsulates command output printing
logiс that depends on the command `-format` option.
Move Print* functions from acl_helpers to prettyFormatter. Add jsonFormatter.
* Return error code in case of formatting failure.
* Add acl commands -format option to doc.
Add command level formatter, that incapsulates command output printing
logiс that depends on the command `-format` option.
Move Print* functions from acl_helpers to prettyFormatter. Add jsonFormatter.
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
When node name contains vertical bar symbol some commands output is
garbled because `|` is used as a delimiter in `columnize.SimpleFormat`.
This commit changes format string to use `\x1f` - ASCII unit
separator[1] as a delimiter and also adds test to cover this case.
Affected commands:
* `consul catalog nodes`
* `consul members`
* `consul operator raft list-peers`
* `consul intention get`
Fixes#3951.
[1]: https://en.wikipedia.org/wiki/Delimiter#Solutions
* add 1.12.2
* add envoy 1.13.0
* Introduce -envoy-version to get 1.10.0 passing.
* update old version and fix consul-exec case
* add envoy_version and fix check
* Update Envoy CLI tests to account for the 1.13 compatibility changes.
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
* Expose Envoy /stats for statsd agents; Add testcases
* Remove merge conflict leftover
* Add support for prefix instead of path; Fix docstring to mirror these changes
* Add new config field to docs; Add testcases to check that /stats/prometheus is exposed as well
* Parametrize matchType (prefix or path) and value
* Update website/source/docs/connect/proxies/envoy.md
Co-Authored-By: Paul Banks <banks@banksco.de>
Co-authored-by: Paul Banks <banks@banksco.de>
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.
In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
* Use consts for well known tagged adress keys
* Add ipv4 and ipv6 tagged addresses for node lan and wan
* Add ipv4 and ipv6 tagged addresses for service lan and wan
* Use IPv4 and IPv6 address in DNS
Also update the Docs and fixup the HTTP API to return proper errors when someone attempts to use Namespaces with an OSS agent.
Add Namespace HTTP API docs
Make all API endpoints disallow unknown fields
The logic in parsing data files and converting them to data structures
accidentally removed healthchecks with no Name field, even though we
explicitly state in API documentation that is allowed.
We remove the check for "len(results.Checks) == 1" because if the length
of the array is more than 0, we know that it is not a zero value array.
This allows us to register a singular, unnamed check via the CLI.
Fixes#6796
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.
Setting ExternalSNI will disable mesh gateway use for that target. It also
disables several service-resolver features that do not make sense for an
external service.
Since generated envoy clusters all are named using (mostly) SNI syntax
we can have envoy read the various fields out of that structure and emit
it as stats labels to the various telemetry backends.
I changed the delimiter for the 'customization hash' from ':' to '~'
because ':' is always reencoded by envoy as '_' when generating metrics
keys.
Add parameter local-only to operator keyring list requests to force queries to only hit local servers (no WAN traffic).
HTTP API: GET /operator/keyring?local-only=true
CLI: consul keyring -list --local-only
Sending the local-only flag with any non-GET/list request will result in an error.
The json decoder inside of the HCLv1 hcl.Decode function behaves
unexpectedly when decoding generically into a map[string]interface{} as
is done for 'consul config write' pre-submit decoding.
This results in some subtle (service-router Match and Destinations being
separated) and some not so subtle (service-resolver subsets and failover
panic if multiple subsets are referenced) bugs when subsequently passed
through mapstructure to finish decoding.
Given that HCLv1 is basically frozen and the HCL part of it is fine
instead of trying to figure out what the underlying bug is in the json
decoder for our purposes just sniff the byte slice and selectively use
the stdlib json decoder for JSON and hcl decoder for HCL.
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.
Also removed ability to configure the envoy OverprovisioningFactor.
All these changes should have no side-effects or change behavior:
- Use bytes.Buffer's String() instead of a conversion
- Use time.Since and time.Until where fitting
- Drop unnecessary returns and assignment
Both 'consul config write' and server bootstrap config entries take a
decoding detour through mapstructure on the way from HCL to an actual
struct. They both may take in snake_case or CamelCase (for consistency)
so need very similar handling.
Unfortunately since they are operating on mirror universes of structs
(api.* vs structs.*) the code cannot be identitical, so try to share the
kind-configuration and duplicate the rest for now.
* Ensure we MapWalk the proxy config in the NodeService and ServiceNode structs
This gets rid of some json encoder errors in the catalog endpoints
* Allow passing explicit bind addresses to envoy
* Move map walking to the ConnectProxyConfig struct
Any place where this struct gets JSON encoded will benefit as opposed to having to implement it everywhere.
* Fail when a non-empty address is provided and not bindable
* camel case
* Update command/connect/envoy/envoy.go
Co-Authored-By: Paul Banks <banks@banksco.de>
* connect: allow overriding envoy listener bind_address
* Update agent/xds/config.go
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
* connect: allow overriding envoy listener bind_port
* envoy: support unix sockets for grpc in bootstrap
Add AgentSocket BootstrapTplArgs which if set overrides the AgentAddress
and AgentPort to generate a bootstrap which points Envoy to a unix
socket file instead of an ip:port.
* Add a test for passing the consul addr as a unix socket
* Fix config formatting for envoy bootstrap tests
* Fix listeners test cases for bind addr/port
* Update website/source/docs/connect/proxies/envoy.md
* Make exec test assert Envoy version - it was not rebuilding before and so often ran against wrong version. This makes 1.10 fail consistenty.
* Switch Envoy exec to use a named pipe rather than FD magic since Envoy 1.10 doesn't support that.
* Refactor to use an internal shim command for piping the bootstrap through.
* Fmt. So sad that vscode golang fails so often these days.
* go mod tidy
* revert go mod tidy changes
* Revert "ignore consul-exec tests until fixed (#5986)"
This reverts commit 683262a6869033cb79e68fa1dba0f9ea83e9187d.
* Review cleanups
This allows addresses to be tagged at the service level similar to what we allow for nodes already. The address translation that can be enabled with the `translate_wan_addrs` config was updated to take these new addresses into account as well.
* Add integration test for central config; fix central config WIP
* Add integration test for central config; fix central config WIP
* Set proxy protocol correctly and begin adding upstream support
* Add upstreams to service config cache key and start new notify watcher if they change.
This doesn't update the tests to pass though.
* Fix some merging logic get things working manually with a hack (TODO fix properly)
* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway
* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does
* Fix up service manageer and API test failures
* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally
* Remove version.go hack - will make integration test fail until release
* Remove unused code from commands and upstream merge
* Re-bump version to 1.5.0
* Add HTTP endpoints for config entry management
* Finish implementing decoding in the HTTP Config entry apply endpoint
* Add CAS operation to the config entry apply endpoint
Also use this for the bootstrapping and move the config entry decoding function into the structs package.
* First pass at the API client for the config entries
* Fixup some of the ConfigEntry APIs
Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well.
Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries.
* Minor API client fixes
* Attempt at some ConfigEntry api client tests
These don’t currently work due to weak typing in JSON
* Get some of the api client tests passing
* Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry
Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing.
* Move MapWalk magic into a binary marshaller instead of JSON.
* Add a MapWalk test
* Get rid of unused func
* Get rid of unused imports
* Fixup some tests now that the decoding from msgpack coerces things into json compat types
* Stub out most of the central config cli
Fully implement the config read command.
* Basic config delete command implementation
* Implement config write command
* Implement config list subcommand
Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output.
* Update command usage
* Update some help usage formatting
* Add the connect enable helper cli command
* Update list command output
* Rename the config entry API client methods.
* Use renamed apis
* Implement config write tests
Stub the others with the noTabs tests.
* Change list output format
Now just simply output 1 line per named config
* Add config read tests
* Add invalid args write test.
* Add config delete tests
* Add config list tests
* Add connect enable tests
* Update some CLI commands to use CAS ops
This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not.
* Fix up the HTTP API CAS tests as I realized they weren’t testing what they should.
* Update config entry rpc tests to properly test CAS
* Fix up a few more tests
* Fix some tests that using ConfigEntries.Apply
* Update config_write_test.go
* Get rid of unused import
* Add support for HTTP proxy listeners
* Add customizable bootstrap configuration options
* Debug logging for xDS AuthZ
* Add Envoy Integration test suite with basic test coverage
* Add envoy command tests to cover new cases
* Add tracing integration test
* Add gRPC support WIP
* Merged changes from master Docker. get CI integration to work with same Dockerfile now
* Make docker build optional for integration
* Enable integration tests again!
* http2 and grpc integration tests and fixes
* Fix up command config tests
* Store all container logs as artifacts in circle on fail
* Add retries to outer part of stats measurements as we keep missing them in CI
* Only dump logs on failing cases
* Fix typos from code review
* Review tidying and make tests pass again
* Add debug logs to exec test.
* Fix legit test failure caused by upstream rename in envoy config
* Attempt to reduce cases of bad TLS handshake in CI integration tests
* bring up the right service
* Add prometheus integration test
* Add test for denied AuthZ both HTTP and TCP
* Try ANSI term for Circle
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.
This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.
This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
This is mainly to avoid having the API return "0001-01-01T00:00:00Z" as
a value for the ExpirationTime field when it is not set. Unfortunately
time.Time doesn't respect the json marshalling "omitempty" directive.
These act like a special cased version of a Policy Template for granting
a token the privileges necessary to register a service and its connect
proxy, and read upstreams from the catalog.
* Move the watch package into the api module
It was already just a thin wrapper around the API anyways. The biggest change was to the testing. Instead of using a test agent directly from the agent package it now uses the binary on the PATH just like the other API tests.
The other big changes were to fix up the connect based watch tests so that we didn’t need to pull in the connect package (and therefore all of Consul)
Fixes: #4222
# Data Filtering
This PR will implement filtering for the following endpoints:
## Supported HTTP Endpoints
- `/agent/checks`
- `/agent/services`
- `/catalog/nodes`
- `/catalog/service/:service`
- `/catalog/connect/:service`
- `/catalog/node/:node`
- `/health/node/:node`
- `/health/checks/:service`
- `/health/service/:service`
- `/health/connect/:service`
- `/health/state/:state`
- `/internal/ui/nodes`
- `/internal/ui/services`
More can be added going forward and any endpoint which is used to list some data is a good candidate.
## Usage
When using the HTTP API a `filter` query parameter can be used to pass a filter expression to Consul. Filter Expressions take the general form of:
```
<selector> == <value>
<selector> != <value>
<value> in <selector>
<value> not in <selector>
<selector> contains <value>
<selector> not contains <value>
<selector> is empty
<selector> is not empty
not <other expression>
<expression 1> and <expression 2>
<expression 1> or <expression 2>
```
Normal boolean logic and precedence is supported. All of the actual filtering and evaluation logic is coming from the [go-bexpr](https://github.com/hashicorp/go-bexpr) library
## Other changes
Adding the `Internal.ServiceDump` RPC endpoint. This will allow the UI to filter services better.
* First conversion
* Use serf 0.8.2 tag and associated updated deps
* * Move freeport and testutil into internal/
* Make internal/ its own module
* Update imports
* Add replace statements so API and normal Consul code are
self-referencing for ease of development
* Adapt to newer goe/values
* Bump to new cleanhttp
* Fix ban nonprintable chars test
* Update lock bad args test
The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.
* Update another test as well
* Bump travis
* Bump circleci
* Bump go-discover and godo to get rid of launchpad dep
* Bump dockerfile go version
* fix tar command
* Bump go-cleanhttp
This PR adds two features which will be useful for operators when ACLs are in use.
1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)
Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.
Some other secondary changes:
* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid.
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
This way we can avoid unnecessary panics which cause other tests not to run.
This doesn't remove all the possibilities for panics causing other tests not to run, it just fixes the TestAgent
This endpoint aggregates all checks related to <service id> on the agent
and return an appropriate http code + the string describing the worst
check.
This allows to cleanly expose service status to other component, hiding
complexity of multiple checks.
This is especially useful to use consul to feed a load balancer which
would delegate health checking to consul agent.
Exposing this endpoint on the agent is necessary to avoid a hit on
consul servers and avoid decreasing resiliency (this endpoint will work
even if there is no consul leader in the cluster).
* website: add multi-dc enterprise landing page
* website: switch all 1.4.0 alerts/RC warnings
* website: connect product wording
Co-Authored-By: pearkes <jackpearkes@gmail.com>
* website: remove RC notification
* commmand/acl: fix usage docs for ACL tokens
* agent: remove comment, OperatorRead
* website: improve multi-dc docs
Still not happy with this but tried to make it slightly more informative.
* website: put back acl guide warning for 1.4.0
* website: simplify multi-dc page and respond to feedback
* Fix Multi-DC typos on connect index page.
* Improve Multi-DC overview.
A full guide is a WIP and will be added post-release.
* Fixes typo avaiable > available
* Adds a flag to `consul acl token update` that allows legacy ACLs to be upgraded via the CLI.
Also fixes a bug where descriptions are deleted if not specified.
* Remove debug
* Implement CLI token cloning & special ID handling
* Update a couple CLI commands to take some alternative options.
* Document the CLI.
* Update the policy list and set-agent-token synopsis
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description
At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.
On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.
Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
A server running the new system must still support other clients using the legacy system.
A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.
So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
* agent/debug: add package for debugging, host info
* api: add v1/agent/host endpoint
* agent: add v1/agent/host endpoint
* command/debug: implementation of static capture
* command/debug: tests and only configured targets
* agent/debug: add basic test for host metrics
* command/debug: add methods for dynamic data capture
* api: add debug/pprof endpoints
* command/debug: add pprof
* command/debug: timing, wg, logs to disk
* vendor: add gopsutil/disk
* command/debug: add a usage section
* website: add docs for consul debug
* agent/host: require operator:read
* api/host: improve docs and no retry timing
* command/debug: fail on extra arguments
* command/debug: fixup file permissions to 0644
* command/debug: remove server flags
* command/debug: improve clarity of usage section
* api/debug: add Trace for profiling, fix profile
* command/debug: capture profile and trace at the same time
* command/debug: add index document
* command/debug: use "clusters" in place of members
* command/debug: remove address in output
* command/debug: improve comment on metrics sleep
* command/debug: clarify usage
* agent: always register pprof handlers and protect
This will allow us to avoid a restart of a target agent
for profiling by always registering the pprof handlers.
Given this is a potentially sensitive path, it is protected
with an operator:read ACL and enable debug being
set to true on the target agent. enable_debug still requires
a restart.
If ACLs are disabled, enable_debug is sufficient.
* command/debug: use trace.out instead of .prof
More in line with golang docs.
* agent: fix comment wording
* agent: wrap table driven tests in t.run()
* Add -enable-local-script-checks options
These options allow for a finer control over when script checks are enabled by
giving the option to only allow them when they are declared from the local
file system.
* Add documentation for the new option
* Nitpick doc wording
* Default gRPC port; Start on some basic tests for argument and ENV handling; Make Exec test less platform-dependent.
* Allow hot-restarts
* Remove debug
Play a trick with CLOEXEC to pass the envoy bootstrap configuration as
an open file descriptor to the exec'd envoy process. The file only
briefly touches disk before being unlinked.
We convince envoy to read from this open file descriptor by using the
/dev/fd/$FDNUMBER mechanism to read the open file descriptor as a file.
Because the filename no longer has an extension envoy's sniffing logic
falls back on JSON instead of YAML, so the bootstrap configuration must
be generated as JSON instead.
* Plumb xDS server and proxyxfg into the agent startup
* Add `consul connect envoy` command to allow running Envoy as a connect sidecar.
* Add test for help tabs; typos and style fixups from review
- A new endpoint `/v1/agent/service/:service_id` which is a generic way to look up the service for a single instance. The primary value here is that it:
- **supports hash-based blocking** and so;
- **replaces `/agent/connect/proxy/:proxy_id`** as the mechanism the built-in proxy uses to read its config.
- It's not proxy specific and so works for any service.
- It has a temporary shim to call through to the existing endpoint to preserve current managed proxy config defaulting behaviour until that is removed entirely (tested).
- The built-in proxy now uses the new endpoint exclusively for it's config
- The built-in proxy now has a `-sidecar-for` flag that allows the service ID of the _target_ service to be specified, on the condition that there is exactly one "sidecar" proxy (that is one that has `Proxy.DestinationServiceID` set) for the service registered.
- Several fixes for edge cases for SidecarService
- A fix for `Alias` checks - when running locally they didn't update their state until some external thing updated the target. If the target service has no checks registered as below, then the alias never made it past critical.
* Refactor Service Definition ProxyDestination.
This includes:
- Refactoring all internal structs used
- Updated tests for both deprecated and new input for:
- Agent Services endpoint response
- Agent Service endpoint response
- Agent Register endpoint
- Unmanaged deprecated field
- Unmanaged new fields
- Managed deprecated upstreams
- Managed new
- Catalog Register
- Unmanaged deprecated field
- Unmanaged new fields
- Managed deprecated upstreams
- Managed new
- Catalog Services endpoint response
- Catalog Node endpoint response
- Catalog Service endpoint response
- Updated API tests for all of the above too (both deprecated and new forms of register)
TODO:
- config package changes for on-disk service definitions
- proxy config endpoint
- built-in proxy support for new fields
* Agent proxy config endpoint updated with upstreams
* Config file changes for upstreams.
* Add upstream opaque config and update all tests to ensure it works everywhere.
* Built in proxy working with new Upstreams config
* Command fixes and deprecations
* Fix key translation, upstream type defaults and a spate of other subtele bugs found with ned to end test scripts...
TODO: tests still failing on one case that needs a fix. I think it's key translation for upstreams nested in Managed proxy struct.
* Fix translated keys in API registration.
≈
* Fixes from docs
- omit some empty undocumented fields in API
- Bring back ServiceProxyDestination in Catalog responses to not break backwards compat - this was removed assuming it was only used internally.
* Documentation updates for Upstreams in service definition
* Fixes for tests broken by many refactors.
* Enable travis on f-connect branch in this branch too.
* Add consistent Deprecation comments to ProxyDestination uses
* Update version number on deprecation notices, and correct upstream datacenter field with explanation in docs
* Rename agent/proxy package to reflect that it is limited to managed proxy processes
Rationale: we have several other components of the agent that relate to Connect proxies for example the ProxyConfigManager component needed for Envoy work. Those things are pretty separate from the focus of this package so far which is only concerned with managing external proxy processes so it's nota good fit to put code for that in here, yet there is a naming clash if we have other packages related to proxy functionality that are not in the `agent/proxy` package.
Happy to bikeshed the name. I started by calling it `managedproxy` but `managedproxy.Manager` is especially unpleasant. `proxyprocess` seems good in that it's more specific about purpose but less clearly connected with the concept of "managed proxies". The names in use are cleaner though e.g. `proxyprocess.Manager`.
This rename was completed automatically using golang.org/x/tools/cmd/gomvpkg.
Depends on #4541
* Fix missed windows tagged files
* Implementation of Weights Data structures
Adding this datastructure will allow us to resolve the
issues #1088 and #4198
This new structure defaults to values:
```
{ Passing: 1, Warning: 0 }
```
Which means, use weight of 0 for a Service in Warning State
while use Weight 1 for a Healthy Service.
Thus it remains compatible with previous Consul versions.
* Implemented weights for DNS SRV Records
* DNS properly support agents with weight support while server does not (backwards compatibility)
* Use Warning value of Weights of 1 by default
When using DNS interface with only_passing = false, all nodes
with non-Critical healthcheck used to have a weight value of 1.
While having weight.Warning = 0 as default value, this is probably
a bad idea as it breaks ascending compatibility.
Thus, we put a default value of 1 to be consistent with existing behaviour.
* Added documentation for new weight field in service description
* Better documentation about weights as suggested by @banks
* Return weight = 1 for unknown Check states as suggested by @banks
* Fixed typo (of -> or) in error message as requested by @mkeeler
* Fixed unstable unit test TestRetryJoin
* Fixed unstable tests
* Fixed wrong Fatalf format in `testrpc/wait.go`
* Added notes regarding DNS SRV lookup limitations regarding number of instances
* Documentation fixes and clarification regarding SRV records with weights as requested by @banks
* Rephrase docs
* Added log-file flag to capture Consul logs in a user specified file
* Refactored code.
* Refactored code. Added flags to rotate logs based on bytes and duration
* Added the flags for log file and log rotation on the webpage
* Fixed TestSantize from failing due to the addition of 3 flags
* Introduced changes : mutex, data-dir log writes, rotation logic
* Added test for logfile and updated the default log destination for docs
* Log name now uses UnixNano
* TestLogFile is now uses t.Parallel()
* Removed unnecessary int64Val function
* Updated docs to reflect default log name for log-file
* No longer writes to data-dir and adds .log if the filename has no extension
- Add WaitForTestAgent to tests flaky due to missing serfHealth registration
- Fix bug in retries calling Fatalf with *testing.T
- Convert TestLockCommand_ChildExitCode to table driven test
- Improve resilience of testrpc.WaitForLeader()
- Add additionall retry to CI
- Increase "go test" timeout to 8m
- Add wait for cluster leader to several tests in the agent package
- Add retry to some tests in the api and command packages
Joel Watson