Adds the merge-central-config query param option to the /catalog/node-services/:node-name API,
to get a service definition in the response that is merged with central defaults (proxy-defaults/service-defaults).
Updated the consul connect envoy command to use this option when
retrieving the proxy service details so as to render the bootstrap configuration correctly.
When our peer deletes the peering it is locally marked as terminated.
This termination should kick off deleting all imported data, but should
not delete the peering object itself.
Keeping peerings marked as terminated acts as a signal that the action
took place.
Once a peering is marked for deletion a new leader routine will now
clean up all imported resources and then the peering itself.
A lot of the logic was grabbed from the namespace/partitions deferred
deletions but with a handful of simplifications:
- The rate limiting is not configurable.
- Deleting imported nodes/services/checks is done by deleting nodes with
the Txn API. The services and checks are deleted as a side-effect.
- There is no "round rate limiter" like with namespaces and partitions.
This is because peerings are purely local, and deleting a peering in
the datacenter does not depend on deleting data from other DCs like
with WAN-federated namespaces. All rate limiting is handled by the
Raft rate limiter.
1. Fix a bug where the peering leader routine would not track all active
peerings in the "stored" reconciliation map. This could lead to
tearing down streams where the token was generated, since the
ConnectedStreams() method used for reconciliation returns all streams
and not just the ones initiated by this leader routine.
2. Fix a race where stream contexts were being canceled before
termination messages were being processed by a peer.
Previously the leader routine would tear down streams by canceling
their context right after the termination message was sent. This
context cancelation could be propagated to the server side faster
than the termination message. Now there is a change where the
dialing peer uses CloseSend() to signal when no more messages will
be sent. Eventually the server peer will read an EOF after receiving
and processing the preceding termination message.
Using CloseSend() is actually not enough to address the issue
mentioned, since it doesn't wait for the server peer to finish
processing messages. Because of this now the dialing peer also reads
from the stream until an error signals that there are no more
messages. Receiving an EOF from our peer indicates that they
processed the termination message and have no additional work to do.
Given that the stream is being closed, all the messages received by
Recv are discarded. We only check for errors to avoid importing new
data.
When deleting a peering we do not want to delete the peering and all
imported data in a single operation, since deleting a large amount of
data at once could overload Consul.
Instead we defer deletion of peerings so that:
1. When a peering deletion request is received via gRPC the peering is
marked for deletion by setting the DeletedAt field.
2. A leader routine will monitor for peerings that are marked for
deletion and kick off a throttled deletion of all imported resources
before deleting the peering itself.
This commit mostly addresses point #1 by modifying the peering service
to mark peerings for deletion. Another key change is to add a
PeeringListDeleted state store function which can return all peerings
marked for deletion. This function is what will be watched by the
deferred deletion leader routine.
Previously, imported data would never be deleted. As
nodes/services/checks were registered and deregistered, resources
deleted from the exporting cluster would accumulate in the imported
cluster.
This commit makes updates to replication so that whenever an update is
received for a service name we reconcile what was present in the catalog
against what was received.
This handleUpdateService method can handle both updates and deletions.
When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
Mesh gateways can use hostnames in their tagged addresses (#7999). This is useful
if you were to expose a mesh gateway using a cloud networking load balancer appliance
that gives you a DNS name but no reliable static IPs.
Envoy cannot accept hostnames via EDS and those must be configured using CDS.
There was already logic when configuring gateways in other locations in the code, but
given the illusions in play for peering the downstream of a peered service wasn't aware
that it should be doing that.
Also:
- ensuring that we always try to use wan-like addresses to cross peer boundaries.
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.
This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
* when enterprise meta are wildcard assume it's a service intention
* fix partition and namespace
* move kind outside the loops
* get the kind check outside the loop and add a comment
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* first draft of destinations intention in connect proxy
* remove ServiceDestinationList
* fix failing tests
* fix agent/consul failing tests
* change to filter intentions in the state store instead of adding a field.
* fix failing tests
* fix comment
* fix comments
* store service kind destination and add relevant tests
* changes based on review
* filter on destinations when querying source match
* change state store API to get an IntentionTarget parameter
* add intentions tests
* add destination upstream endpoint
* fix failing test
* fix failing test and a bug with wildcard intentions
* fix failing test
* Apply suggestions from code review
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
* add missing test and clarify doc
* fix style
* gofmt intention.go
* fix merge introduced issue
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* first draft of destinations intention in connect proxy
* remove ServiceDestinationList
* fix failing tests
* fix agent/consul failing tests
* change to filter intentions in the state store instead of adding a field.
* fix failing tests
* fix comment
* fix comments
* store service kind destination and add relevant tests
* changes based on review
* filter on destinations when querying source match
* Apply suggestions from code review
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
* fix style
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* rename destinationType to targetType.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
Mesh gateways will now enable tcp connections with SNI names including peering information so that those connections may be proxied.
Note: this does not change the callers to use these mesh gateways.
This is the OSS portion of enterprise PR 1994
Rather than directly interrogating the agent-local state for HTTP
checks using the `HTTPCheckFetcher` interface, we now rely on the
config snapshot containing the checks.
This reduces the number of changes required to support server xDS
sessions.
It's not clear why the fetching approach was introduced in
931d167ebb2300839b218d08871f22323c60175d.
Envoy's SPIFFE certificate validation extension allows for us to
validate against different root certificates depending on the trust
domain of the dialing proxy.
If there are any trust bundles from peers in the config snapshot then we
use the SPIFFE validator as the validation context, rather than the
usual TrustedCA.
The injected validation config includes the local root certificates as
well.
There are a handful of changes in this commit:
* When querying trust bundles for a service we need to be able to
specify the namespace of the service.
* The endpoint needs to track the index because the cache watches use
it.
* Extracted bulk of the endpoint's logic to a state store function
so that index tracking could be tested more easily.
* Removed check for service existence, deferring that sort of work to ACL authz
* Added the cache type
Given that the exported-services config entry can use wildcards, the
precedence for wildcards is handled as with intentions. The most exact
match is the match that applies for any given service. We do not take
the union of all that apply.
Another update that was made was to reflect that only one
exported-services config entry applies to any given service in a
partition. This is a pre-existing constraint that gets enforced by
the Normalize() method on that config entry type.
For mTLS to work between two proxies in peered clusters with different root CAs,
proxies need to configure their outbound listener to use different root certificates
for validation.
Up until peering was introduced proxies would only ever use one set of root certificates
to validate all mesh traffic, both inbound and outbound. Now an upstream proxy
may have a leaf certificate signed by a CA that's different from the dialing proxy's.
This PR makes changes to proxycfg and xds so that the upstream TLS validation
uses different root certificates depending on which cluster is being dialed.
This is the OSS portion of enterprise PRs 1904, 1905, 1906, 1907, 1949,
and 1971.
It replaces the proxycfg manager's direct dependency on the agent cache
with interfaces that will be implemented differently when serving xDS
sessions from a Consul server.
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* rename consts and fix kind when no destination is defined in the service-defaults.
* rename Kind to ServiceKind and change switch to use .(type)
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Replace bindata packages with stdlib go:embed.
Modernize some uiserver code with newer interfaces introduced in go 1.16 (mainly working with fs.File instead of http.File.
Remove steps that are no longer used from our build files.
Add Github Action to detect differences in agent/uiserver/dist and verify that the files are correct (by compiling UI assets and comparing contents).
Proxies dialing exporting services need to know the SPIFFE ID of
services dialed so that the upstream's SANs can be validated.
This commit attaches the SPIFFE ID to all connect proxies exported over
the peering stream so that they are available to importing clusters.
The data in the SPIFFE ID cannot be re-constructed in peer clusters
because the partition of exported services is overwritten on imports.
At the end of this test we were trying to ensure that updating a service in the local state causes it to re-register the service with the config manager.
The config manager in the same method will also call RegisteredProxies to determine if any need to be removed. This portion of the test is not attempting to verify that behavior.
Because the test is only blocked waiting for the Register event before it can end and assert all the mock expectations were met, we may not see the call to RegisteredProxies. This is especially apparent when tests are run with the race detector.
As we don’t actually care if that method is executed before the end of the test we can simply transition from expecting it to be called exactly once to a 0 or 1 times assertion.
OSS port of enterprise PR 1822
Includes the necessary changes to the `proxycfg` and `xds` packages to enable
Consul servers to configure arbitrary proxies using catalog data.
Broadly, `proxycfg.Manager` now has public methods for registering,
deregistering, and listing registered proxies — the existing local agent
state-sync behavior has been moved into a separate component that makes use of
these methods.
When an xDS session is started for a proxy service in the catalog, a goroutine
will be spawned to watch the service in the server's state store and
re-register it with the `proxycfg.Manager` whenever it is updated (and clean
it up when the client goes away).
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Adds a new query param merge-central-config for use with the below endpoints:
/catalog/service/:service
/catalog/connect/:service
/health/service/:service
/health/connect/:service
If set on the request, the response will include a fully resolved service definition which is merged with the proxy-defaults/global and service-defaults/:service config entries (on-demand style). This is useful to view the full service definition for a mesh service (connect-proxy kind or gateway kind) which might not be merged before being written into the catalog (example: in case of services in the agentless model).
I noticed that the JSON api endpoints for peerings json encodes protobufs directly, rather than converting them into their `api` package equivalents before marshal/unmarshaling them.
I updated this and used `mog` to do the annoying part in the middle.
Other changes:
- the status enum was converted into the friendlier string form of the enum for readability with tools like `curl`
- some of the `api` library functions were slightly modified to match other similar endpoints in UX (cc: @ndhanushkodi )
- peeringRead returns `nil` if not found
- partitions are NOT inferred from the agent's partition (matching 1.11-style logic)
The importing peer will need to know what SNI and SPIFFE name
corresponds to each exported service. Additionally it will need to know
at a high level the protocol in use (L4/L7) to generate the appropriate
connection pool and local metrics.
For replicated connect synthetic entities we edit the `Connect{}` part
of a `NodeService` to have a new section:
{
"PeerMeta": {
"SNI": [
"web.default.default.owt.external.183150d5-1033-3672-c426-c29205a576b8.consul"
],
"SpiffeID": [
"spiffe://183150d5-1033-3672-c426-c29205a576b8.consul/ns/default/dc/dc1/svc/web"
],
"Protocol": "tcp"
}
}
This data is then replicated and saved as-is at the importing side. Both
SNI and SpiffeID are slices for now until I can be sure we don't need
them for how mesh gateways will ultimately work.
* fix: non-leader agents return 404 on Get Intention exact api
- rpc call method appends extra error message, so change == to
"Strings.Contains"
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* Install `buf` instead of `protoc`
* Created `buf.yaml` and `buf.gen.yaml` files in the two proto directories to control how `buf` generates/lints proto code.
* Invoke `buf` instead of `protoc`
* Added a `proto-format` make target.
* Committed the reformatted proto files.
* Added a `proto-lint` make target.
* Integrated proto linting with CI
* Fixed tons of proto linter warnings.
* Got rid of deprecated builtin protoc-gen-go grpc plugin usage. Moved to direct usage of protoc-gen-go-grpc.
* Unified all proto directories / go packages around using pb prefixes but ensuring all proto packages do not have the prefix.
Occasionally we had seen the TestWatchServers_ACLToken_PermissionDenied be flagged as flaky in circleci. This change should fix that.
Why it fixes it is complicated. The test was failing with a panic when a mocked ACL Resolver was being called more times than expected. I struggled for a while to determine how that could be. This test should call authorize once and only once and the error returned should cause the stream to be terminated and the error returned to the gRPC client. Another oddity was no amount of running this test locally seemed to be able to reproduce the issue. I ran the test hundreds of thousands of time and it always passed.
It turns out that there is nothing wrong with the test. It just so happens that the panic from unexpected invocation of a mocked call happened during the test but was caused by a previous test (specifically the TestWatchServers_StreamLifecycle test)
The stream from the previous test remained open after all the test Cleanup functions were run and it just so happened that when the EventPublisher eventually picked up that the context was cancelled during cleanup, it force closes all subscriptions which causes some loops to be re-entered and the streams to be reauthorized. Its that looping in response to forced subscription closures that causes the mock to eventually panic. All the components, publisher, server, client all operate based on contexts. We cancel all those contexts but there is no syncrhonous way to know when they are stopped.
We could have implemented a syncrhonous stop but in the context of an actual running Consul, context cancellation + async stopping is perfectly fine. What we (Dan and I) eventually thought was that the behavior of grpc streams such as this when a server was shutting down wasn’t super helpful. What we would want is for a client to be able to distinguish between subscription closed because something may have changed requiring re-authentication and subscription closed because the server is shutting down. That way we can send back appropriate error messages to detail that the server is shutting down and not confuse users with potentially needing to resubscribe.
So thats what this PR does. We have introduced a shutting down state to our event subscriptions and the various streaming gRPC services that rely on the event publisher will all just behave correctly and actually stop the stream (not attempt transparent reauthorization) if this particular error is the one we get from the stream. Additionally the error that gets transmitted back through gRPC when this does occur indicates to the consumer that the server is going away. That is more helpful so that a client can then attempt to reconnect to another server.
OSS portion of enterprise PR 1857.
This removes (most) references to the `cache.UpdateEvent` type in the
`proxycfg` package.
As we're going to be direct usage of the agent cache with interfaces that
can be satisfied by alternative server-local datasources, it doesn't make
sense to depend on this type everywhere anymore (particularly on the
`state.ch` channel).
We also plan to extract `proxycfg` out of Consul into a shared library in
the future, which would require removing this dependency.
Aside from a fairly rote find-and-replace, the main change is that the
`cache.Cache` and `health.Client` types now accept a callback function
parameter, rather than a `chan<- cache.UpdateEvents`. This allows us to
do the type conversion without running another goroutine.
- Introduce a new telemetry configurable parameter retry_failed_connection. User can set the value to true to let consul agent continue its start process on failed connection to datadog server. When set to false, agent will stop on failed start. The default behavior is true.
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
Treat each exported service as a "discovery chain" and replicate one
synthetic CheckServiceNode for each chain and remote mesh gateway.
The health will be a flattened generated check of the checks for that
mesh gateway node.
By changing to use WatchCtx we will actually block for changes to the peering list. WatchCh creates a goroutine to collect errors from WatchCtx and returns immediately.
The existing behavior wouldn't result in a tight loop because of the rate limiting in the surrounding function, but it would still lead to more work than is necessary.
Changes include:
- Add diagrams of the operation of different consistency modes
- Note that only stale reads benefit from horizontal scaling
- Increase scannability with headings
- Document consistency mode defaults and how to override for
DNS and HTTP API interfaces
- Document X-Consul-Effective-Consistency response header
Changes to how the version string was handled created small regression with the release of consul 1.12.0 enterprise.
Many tools use the Config:Version field reported by the agent/self resource to determine whether Consul is an enterprise or OSS instance, expect something like 1.12.0+ent for enterprise and simply 1.12.0 for OSS. This was accidentally broken during the runup to 1.12.x
This work fixes the value returned by both the self endpoint in ["Config"]["Version"] and the metrics consul.version field.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Add validation to ensure connect native services have a port or socketpath specified on catalog registration.
This was the only missing piece to ensure all mesh services are validated for a port (or socketpath) specification on catalog registration.
* Support vault namespaces in connect CA
Follow on to some missed items from #12655
From an internal ticket "Support standard "Vault namespace in the
path" semantics for Connect Vault CA Provider"
Vault allows the namespace to be specified as a prefix in the path of
a PKI definition, but our usage of the Vault API includes calls that
don't support a namespaced key. In particular the sys.* family of
calls simply appends the key, instead of prefixing the namespace in
front of the path.
Unfortunately it is difficult to reliably parse a path with a
namespace; only vault knows what namespaces are present, and the '/'
separator can be inside a key name, as well as separating path
elements. This is in use in the wild; for example
'dc1/intermediate-key' is a relatively common naming schema.
Instead we add two new fields: RootPKINamespace and
IntermediatePKINamespace, which are the absolute namespace paths
'prefixed' in front of the respective PKI Paths.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Introduces two new public gRPC endpoints (`Login` and `Logout`) and
includes refactoring of the equivalent net/rpc endpoints to enable the
majority of logic to be reused (i.e. by extracting the `Binder` and
`TokenWriter` types).
This contains the OSS portions of the following enterprise commits:
- 75fcdbfcfa6af21d7128cb2544829ead0b1df603
- bce14b714151af74a7f0110843d640204082630a
- cc508b70fbf58eda144d9af3d71bd0f483985893
Description
Add x-fowarded-client-cert information on trusted incoming connections.
Envoy provides support forwarding and annotating the
x-forwarded-client-cert header via the forward_client_cert_details
set_current_client_cert_details filter fields. It would be helpful for
consul to support this directly in its config. The escape hatches are
a bit cumbersome for this purpose.
This has been implemented on incoming connections to envoy. Outgoing
(from the local service through the sidecar) will not have a
certificate, and so are left alone.
A service on an incoming connection will now get headers something like this:
```
X-Forwarded-Client-Cert:[By=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/counting;Hash=61ad5cbdfcb50f5a3ec0ca60923d61613c149a9d4495010a64175c05a0268ab2;Cert="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Chain="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Subject="";URI=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/dashboard]
```
Closes#12852
The primary bug here is in the streaming subsystem that makes the overall v1/health/service/:service request behave incorrectly when servicing a blocking request with a filter provided.
There is a secondary non-streaming bug being fixed here that is much less obvious related to when to update the `reply` variable in a `blockingQuery` evaluation. It is unlikely that it is triggerable in practical environments and I could not actually get the bug to manifest, but I fixed it anyway while investigating the original issue.
Simple reproduction (streaming):
1. Register a service with a tag.
curl -sL --request PUT 'http://localhost:8500/v1/agent/service/register' \
--header 'Content-Type: application/json' \
--data-raw '{ "ID": "ID1", "Name": "test", "Tags":[ "a" ], "EnableTagOverride": true }'
2. Do an initial filter query that matches on the tag.
curl -sLi --get 'http://localhost:8500/v1/health/service/test' --data-urlencode 'filter=a in Service.Tags'
3. Note you get one result. Use the `X-Consul-Index` header to establish
a blocking query in another terminal, this should not return yet.
curl -sLi --get 'http://localhost:8500/v1/health/service/test?index=$INDEX' --data-urlencode 'filter=a in Service.Tags'
4. Re-register that service with a different tag.
curl -sL --request PUT 'http://localhost:8500/v1/agent/service/register' \
--header 'Content-Type: application/json' \
--data-raw '{ "ID": "ID1", "Name": "test", "Tags":[ "b" ], "EnableTagOverride": true }'
5. Your blocking query from (3) should return with a header
`X-Consul-Query-Backend: streaming` and empty results if it works
correctly `[]`.
Attempts to reproduce with non-streaming failed (where you add `&near=_agent` to the read queries and ensure `X-Consul-Query-Backend: blocking-query` shows up in the results).
* update raft to v1.3.7
* add changelog
* fix compilation error
* fix HeartbeatTimeout
* fix ElectionTimeout to reload only if value is valid
* fix default values for `ElectionTimeout` and `HeartbeatTimeout`
* fix test defaults
* bump raft to v1.3.8
Adds a timeout (deadline) to client RPC calls, so that streams will no longer hang indefinitely in unstable network conditions.
Co-authored-by: kisunji <ckim@hashicorp.com>
* Implement the ServerDiscovery.WatchServers gRPC endpoint
* Fix the ConnectCA.Sign gRPC endpoints metadata forwarding.
* Unify public gRPC endpoints around the public.TraceID function for request_id logging
Fixes#12048Fixes#12319
Regression introduced in #11693
Local reproduction steps:
1. `consul agent -dev`
2. `curl -sLiv 'localhost:8500/v1/agent/connect/ca/leaf/web'`
3. make note of the `X-Consul-Index` header returned
4. `curl -sLi 'localhost:8500/v1/agent/connect/ca/leaf/web?index=<VALUE_FROM_STEP_3>'`
5. Kill the above curl when it hangs with Ctrl-C
6. Repeat (2) and it should not hang.
Adds a new gRPC endpoint to get envoy bootstrap params. The new consul-dataplane service will use this
endpoint to generate an envoy bootstrap configuration.
Whenever autopilot updates its state it notifies Consul. That notification will then trigger Consul to extract out the ready server information. If the ready servers have changed, then an event will be published to notify any subscribers of the full set of ready servers.
All these ready server event things are contained within an autopilotevents package instead of the consul package to make importing them into the grpc related packages possible
Introduces a gRPC endpoint for signing Connect leaf certificates. It's also
the first of the public gRPC endpoints to perform leader-forwarding, so
establishes the pattern of forwarding over the multiplexed internal RPC port.
Previously we had 1 EventPublisher per state.Store. When a state store was closed/abandoned such as during a consul snapshot restore, this had the behavior of force closing subscriptions for that topic and evicting event snapshots from the cache.
The intention of this commit is to keep all that behavior. To that end, the shared EventPublisher now supports the ability to refresh a topic. That will perform the force close + eviction. The FSM upon abandoning the previous state.Store will call RefreshTopic for all the topics with events generated by the state.Store.
Just like standard upstreams the order of applicability in descending precedence:
1. caller's `service-defaults` upstream override for destination
2. caller's `service-defaults` upstream defaults
3. destination's `service-resolver` ConnectTimeout
4. system default of 5s
Co-authored-by: mrspanishviking <kcardenas@hashicorp.com>
If a service is automatically registered because it has a critical health check
for longer than deregister_critical_service_after, the error message will now
include:
- mention of the deregister_critical_service_after option
- the value of deregister_critical_service_after for that check
* Fixes a lint warning about t.Errorf not supporting %w
* Enable running autopilot on all servers
On the non-leader servers all they do is update the state and do not attempt any modifications.
* Fix the RPC conn limiting tests
Technically they were relying on racey behavior before. Now they should be reliable.
Adds a new gRPC service and endpoint to return the list of supported
consul dataplane features. The Consul Dataplane will use this API to
customize its interaction with that particular server.
Adds a new gRPC streaming endpoint (WatchRoots) that dataplane clients will
use to fetch the current list of active Connect CA roots and receive new
lists whenever the roots are rotated.
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* do not reset timer on errors, rename OS specific files
* rename New func
* events trigger on write and rename
* add missing test
* fix flaking tests
* fix flaky test
* check reconcile when removed
* delete invalid file
* fix test to create files with different mod time.
* back date file instead of sleeping
* add watching file in agent command.
* fix watcher call to use new API
* add configuration and stop watcher when server stop
* add certs as watched files
* move FileWatcher to the agent start instead of the command code
* stop watcher before replacing it
* save watched files in agent
* add add and remove interfaces to the file watcher
* fix remove to not return an error
* use `Add` and `Remove` to update certs files
* fix tests
* close events channel on the file watcher even when the context is done
* extract `NotAutoReloadableRuntimeConfig` is a separate struct
* fix linter errors
* add Ca configs and outgoing verify to the not auto reloadable config
* add some logs and fix to use background context
* add tests to auto-config reload
* remove stale test
* add tests to changes to config files
* add check to see if old cert files still trigger updates
* rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig`
* fix to re add both key and cert file. Add test to cover this case.
* review suggestion
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add check to static runtime config changes
* fix test
* add changelog file
* fix review comments
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* update flag description
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* fix compilation error
* add static runtime config support
* fix test
* fix review comments
* fix log test
* Update .changelog/12329.txt
Co-authored-by: Dan Upton <daniel@floppy.co>
* transfer tests to runtime_test.go
* fix filewatcher Replace to not deadlock.
* avoid having lingering locks
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* split ReloadConfig func
* fix warning message
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* convert `FileWatcher` into an interface
* fix compilation errors
* fix tests
* extract func for adding and removing files
* add a coalesceTimer with a very small timer
* extract coaelsce Timer and add a shim for testing
* add tests to coalesceTimer fix to send remaining events
* set `coalesceTimer` to 1 Second
* support symlink, fix a nil deref.
* fix compile error
* fix compile error
* refactor file watcher rate limiting to be a Watcher implementation
* fix linter issue
* fix runtime config
* fix runtime test
* fix flaky tests
* fix compile error
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* fix agent New to return an error if File watcher New return an error
* quit timer loop if ctx is canceled
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* Avoid doing list of /sys/mounts
From an internal ticket "Support standard "Vault namespace in the path" semantics for Connect Vault CA Provider"
Vault allows the namespace to be specified as a prefix in the path of
a PKI definition, but this doesn't currently work for
```IntermediatePKIPath``` specifications, because we attempt to list
all of the paths to check if ours is already defined. This doesn't
really work in a namespaced world.
This changes the IntermediatePKIPath code to follow the same pattern
as the root key, where we directly get the key rather than listing.
This code is difficult to write automated tests for because it relies
on features of Vault Enterprise, which isn't currently part of our
test framework, so it was tested manually.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add changelog
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* do not reset timer on errors, rename OS specific files
* rename New func
* events trigger on write and rename
* add missing test
* fix flaking tests
* fix flaky test
* check reconcile when removed
* delete invalid file
* fix test to create files with different mod time.
* back date file instead of sleeping
* add watching file in agent command.
* fix watcher call to use new API
* add configuration and stop watcher when server stop
* add certs as watched files
* move FileWatcher to the agent start instead of the command code
* stop watcher before replacing it
* save watched files in agent
* add add and remove interfaces to the file watcher
* fix remove to not return an error
* use `Add` and `Remove` to update certs files
* fix tests
* close events channel on the file watcher even when the context is done
* extract `NotAutoReloadableRuntimeConfig` is a separate struct
* fix linter errors
* add Ca configs and outgoing verify to the not auto reloadable config
* add some logs and fix to use background context
* add tests to auto-config reload
* remove stale test
* add tests to changes to config files
* add check to see if old cert files still trigger updates
* rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig`
* fix to re add both key and cert file. Add test to cover this case.
* review suggestion
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add check to static runtime config changes
* fix test
* add changelog file
* fix review comments
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* update flag description
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* fix compilation error
* add static runtime config support
* fix test
* fix review comments
* fix log test
* Update .changelog/12329.txt
Co-authored-by: Dan Upton <daniel@floppy.co>
* transfer tests to runtime_test.go
* fix filewatcher Replace to not deadlock.
* avoid having lingering locks
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* split ReloadConfig func
* fix warning message
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* convert `FileWatcher` into an interface
* fix compilation errors
* fix tests
* extract func for adding and removing files
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Daniel Upton <daniel@floppy.co>
This adds an aws-iam auth method type which supports authenticating to Consul using AWS IAM identities.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
- `tls.incoming`: applies to the inbound mTLS targeting the public
listener on `connect-proxy` and `terminating-gateway` envoy instances
- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
`connect-proxy` and `ingress-gateway` envoy instances
Fixes#11966
* Fix leaked Vault LifetimeRenewers
When the Vault CA Provider is reconfigured we do not stop the
LifetimeRenewers which can cause them to leak until the Consul processes
recycles. On Configure execute stopWatcher if it exists and is not nil
before starting a new renewal
* Add jitter before restarting the LifetimeWatcher
If we fail to login to Vault or our token is no longer valid we can
overwhelm a Vault instance with many requests very quickly by restarting
the LifetimeWatcher. Before restarting the LifetimeWatcher provide a
backoff time of 1 second or less.
* Use a retry.Waiter instead of RandomStagger
* changelog
* gofmt'd
* Swap out bool for atomic.Unit32 in test
* Provide some extra clarification in comment and changelog
* tlsutil: initial implementation of types/TLSVersion
tlsutil: add test for parsing deprecated agent TLS version strings
tlsutil: return TLSVersionInvalid with error
tlsutil: start moving tlsutil cipher suite lookups over to types/tls
tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup
agent: attempt to use types in runtime config
agent: implement b.tlsVersion validation in config builder
agent: fix tlsVersion nil check in builder
tlsutil: update to renamed ParseTLSVersion and goTLSVersions
tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion
tlsutil: disable invalid config parsing tests
tlsutil: update tests
auto_config: lookup old config strings from base.TLSMinVersion
auto_config: update endpoint tests to use TLS types
agent: update runtime_test to use TLS types
agent: update TestRuntimeCinfig_Sanitize.golden
agent: update config runtime tests to expect TLS types
* website: update Consul agent tls_min_version values
* agent: fixup TLS parsing and compilation errors
* test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test
* tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites
* test: revert autoconfig tls min version fixtures to old format
* types: add TLSVersions public function
* agent: add warning for deprecated TLS version strings
* agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder
* tlsutil(BREAKING): change default TLS min version to TLS 1.2
* agent: move ParseCiphers logic from tlsutil into agent config builder
* tlsutil: remove unused CipherString function
* agent: fixup import for types package
* Revert "tlsutil: remove unused CipherString function"
This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c.
* agent: fixup config builder and runtime tests
* tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig
* test: move TLS cipher suites parsing test from tlsutil into agent config builder tests
* agent: remove parseCiphers helper from auto_config_endpoint_test
* test: remove unused imports from tlsutil
* agent: remove resolved FIXME comment
* tlsutil: remove TODO and FIXME in cipher suite validation
* agent: prevent setting inherited cipher suite config when TLS 1.3 is specified
* changelog: add entry for converting agent config to TLS types
* agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now
* tlsutil: remove config tests for values checked at agent config builder boundary
* tlsutil: remove tls version check from loadProtocolConfig
* tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites
* website: update search link for supported Consul agent cipher suites
* website: apply review suggestions for tls_min_version description
* website: attempt to clean up markdown list formatting for tls_min_version
* website: moar linebreaks to fix tls_min_version formatting
* Revert "website: moar linebreaks to fix tls_min_version formatting"
This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c.
* autoconfig: translate old values for TLSMinVersion
* agent: rename var for translated value of deprecated TLS version value
* Update agent/config/deprecated.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent: fix lint issue
* agent: fixup deprecated config test assertions for updated warning
Co-authored-by: Dan Upton <daniel@floppy.co>
Riddhi Shah