1. do not emit the metric if Query fails
2. properly check for PrimaryUsersIntermediate, the logic was inverted
Also improve the logging by including the metric name in the log message
* fix state index for `CAOpSetRootsAndConfig` op
* add changelog
* Update changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* remove the change log as it's not needed
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
These checks were a bit more involved. They were previously skipping some code paths
when the authorizer was nil. After looking through these it seems correct to remove the
authz == nil check, since it will never evaluate to true.
These case are already impossible conditions, because most of these functions already start
with a check for ACLs being disabled. So the code path being removed could never be reached.
The one other case (ConnectAuthorized) was already changed in a previous commit. This commit
removes an impossible branch because authz == nil can never be true.
These methods are no longer used. Remove the methods, and update the
tests to use actual method used by production code.
Also removes the 'authz == nil' check is no longer a possible code path
now that we are returning a non-nil acl.Authorizer when ACLs are disabled.
The blocking query backend sets the default value on the server side.
The streaming backend does not using blocking queries, so we must set the timeout on
the client.
Now that we have at least one endpoint that uses context for cancellation we can
encounter this scenario where the returned error is a context.Cancelled or
context.DeadlineExceeded.
If the request.Context().Err() is not nil, then we know the request itself was cancelled, so
we can log a different message at Info level, instad of the error.
Knowing that blocking queries are firing does not provide much
information on its own. If we know the correlation IDs we can
piece together which parts of the snapshot have been populated.
Some of these responses might be empty from the blocking
query timing out. But if they're returning quickly I think we
can reasonably assume they contain data.
* return an error when the index is not valid
* check response as bool when applying `CAOpSetConfig`
* remove check for bool response
* fix error message and add check to test
* fix comment
* add changelog
If multiple instances of a service are co-located on the same node then
their proxies will all share a cache entry for their resolved service
configuration. This is because the cache key contains the name of the
watched service but does not take into account the ID of the watching
proxies.
This means that there will be multiple agent service manager watches
that can wake up on the same cache update. These watchers then
concurrently modify the value in the cache when merging the resolved
config into the local proxy definitions.
To avoid this concurrent map write we will only delete the key from
opaque config in the local proxy definition after the merge, rather
than from the cached value before the merge.
This change adds a new `dns_config.recursor_strategy` option which
controls how Consul queries DNS resolvers listed in the `recursors`
config option. The supported options are `sequential` (default), and
`random`.
Closes#8807
Co-authored-by: Blake Covarrubias <blake@covarrubi.as>
Co-authored-by: Priyanka Sengupta <psengupta@flatiron.com>
A previous commit used SetHash on two of the cases to fix a data race. This commit applies
that change to all cases. Using SetHash in this test helper should ensure that the
test helper behaves closer to production.
These changes ensure that the identity of services dialed is
cryptographically verified.
For all upstreams we validate against SPIFFE IDs in the format used by
Consul's service mesh:
spiffe://<trust-domain>/ns/<namespace>/dc/<datacenter>/svc/<service>
The dnsConfig pulled from the atomic.Value is a pointer, so modifying it in place
creates a data race. Use the exported ReloadConfig interface instead.
The LogOutput io.Writer used by TestAgent must allow concurrent reads and writes, and a
bytes.Buffer does not allow this. The bytes.Buffer must be wrapped with a lock to make this safe.
Some global variables are patched to shorter values in these tests. But the goroutines that read
them can outlive the test because nothing waited for them to exit.
This commit adds a Wait() method to the routine manager, so that tests can wait for the goroutines
to exit. This prevents the data race because the 'reset to original value' can happen
after all other goroutines have stopped.
A previous commit started using QueryRefuced, but that is not correct. QueryRefuced refers to
the OpCode, not the query type.
Instead use errNoAnswer because we have no records for that query type.
Now that trimDNSResponse is handled by the caller we don't need to pass this value
around. We can remove it from both the serviceLookup struct, and two functions.
The dispatch function was called from a single place and did nothing but add a default value.
Removing it makes code easier to trace by removing an unnecessary hop.
The compatv2 integration tests were failing because they use an older CLI version with a newer
HTTP API. This commit restores the GRPCPort field to the DebugConfig output to allow older
CIs to continue to fetch the port.
The DebugConfig in the self endpoint can change at any time. It's not a stable API.
With the previous change to rename GRPCPort to XDSPort this command would have broken.
This commit adds the XDSPort to a stable part of the XDS api, and changes the envoy command to read
this new field.
It includes support for the old API as well, in case a newer CLI is used with an older API, and
adds a test for both cases.
* ca: move provider creation into CAManager
This further decouples the CAManager from Server. It reduces the interface between them and
removes the need for the SetLogger method on providers.
* ca: move SignCertificate to CAManager
To reduce the scope of Server, and keep all the CA logic together
* ca: move SignCertificate to the file where it is used
* auto-config: move autoConfigBackend impl off of Server
Most of these methods are used exclusively for the AutoConfig RPC
endpoint. This PR uses a pattern that we've used in other places as an
incremental step to reducing the scope of Server.
* fix linter issues
* check error when `raftApplyMsgpack`
* ca: move SignCertificate to CAManager
To reduce the scope of Server, and keep all the CA logic together
* check expiry date of the intermediate before using it to sign a leaf
* fix typo in comment
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
* Fix test name
* do not check cert start date
* wrap error to mention it is the intermediate expired
* Fix failing test
* update comment
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* use shim to avoid sleep in test
* add root cert validation
* remove duplicate code
* Revert "fix linter issues"
This reverts commit 6356302b54f06c8f2dee8e59740409d49e84ef24.
* fix import issue
* gofmt leader_connect_ca
* add changelog entry
* update error message
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* fix error message in test
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Most of these methods are used exclusively for the AutoConfig RPC
endpoint. This PR uses a pattern that we've used in other places as an
incremental step to reducing the scope of Server.
raftApply was removed so ApplyCARequest needs to handle all the possible operations
Also set the providerShim to use the mock provider.
other changes are small test improvements that were necessary to debug the failures.
and small refactor to getCAProvider so that GoLand is less confused about what it is doing.
Previously it was reporting that the for condition was always true, which was not the case.
After moving ca.ConsulProviderStateDelegate into the interface we now
have the ApplyCARequest method which does the same thing. Use this more
specific method instead of raftApply.
This field was documented as enabling TLS for outgoing RPC, but that was not the case.
All this field did was set the use_tls serf tag.
Instead of setting this field in a place far from where it is used, move the logic to where
the serf tag is set, so that the code is much more obvious.
tlsutil.Config already presents an excellent structure for this
configuration. Copying the runtime config fields to agent/consul.Config
makes code harder to trace, and provides no advantage.
Instead of copying the fields around, use the tlsutil.Config struct
directly instead.
This is one small step in removing the many layers of duplicate
configuration.
* add intermediate ca metric routine
* add Gauge config for intermediate cert
* Stop metrics routine when stopping leader
* add changelog entry
* updage changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* use variables instead of a map
* go imports sort
* Add metrics for primary and secondary ca
* start metrics routine in the right DC
* add telemetry documentation
* update docs
* extract expiry fetching in a func
* merge metrics for primary and secondary into signing ca metric
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
And remove BuildAndValidate. This commit completes some earlier work to reduce the config
interface a single Load function.
The last remaining test was converted to use Load instad of BuildAndValidate.
Previously, for a POST request to the /v1/operator/autopilot/configuration
endpoint, any fields not included in the payload were set to a zero-initialized
value rather than the documented default value.
Now, if an optional field is not included in the payload, it will be set to its
documented default value:
- CleanupDeadServers: true
- LastContactThreshold: "200ms"
- MaxTrailingLogs: 250
- MinQuorum: 0
- ServerStabilizationTime: "10s"
- RedundancyZoneTag: ""
- DisableUpgradeMigration: false
- UpgradeVersionTag: ""
* trim carriage return from certificates when inserting rootCA in the inMemDB
* format rootCA properly when returning the CA on the connect CA endpoint
* Fix linter warnings
* Fix providers to trim certs before returning it
* trim newlines on write when possible
* add changelog
* make sure all provider return a trailing newline after the root and intermediate certs
* Fix endpoint to return trailing new line
* Fix failing test with vault provider
* make test more robust
* make sure all provider return a trailing newline after the leaf certs
* Check for suffix before removing newline and use function
* Add comment to consul provider
* Update change log
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* fix typo
* simplify code callflow
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* extract requireNewLine as shared func
* remove dependency to testify in testing file
* remove extra newline in vault provider
* Add cert newline fix to envoy xds
* remove new line from mock provider
* Remove adding a new line from provider and fix it when the cert is read
* Add a comment to explain the fix
* Add missing for leaf certs
* fix missing new line
* fix missing new line in leaf certs
* remove extra new line in test
* updage changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* fix in vault provider and when reading cache (RPC call)
* fix AWS provider
* fix failing test in the provider
* remove comments and empty lines
* add check for empty cert in test
* fix linter warnings
* add new line for leaf and private key
* use string concat instead of Sprintf
* fix new lines for leaf signing
* preallocate slice and remove append
* Add new line to `SignIntermediate` and `CrossSignCA`
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
The hcl decoding apparently uses strconv.ParseInt, which fails to parse a 64bit int.
Since hcl v1 is basically EOl, it seems unlikely we'll fix this in hcl.
Since this test is only about loading values from config files, the extra large number
doesn't seem important. Trim a few zeros from the numbers so that they parse
properly on 32bit platforms.
Also skip a slow test when -short is used.
sync/atomic must be used with 64-bit aligned fields, and that alignment is difficult to
ensure unless the field is the first one in the struct.
https://golang.org/pkg/sync/atomic/#pkg-note-BUG.
If a value was already available in the local view the request is considered a cache hit.
If the materialized had to wait for a value, it is considered a cache miss.
This test is super racy (it's not just a single line).
This test also starts failing once streaming is enabled, because the
cache rate limit no longer applies to the requests in the test. The
queries use streaming instead of the cache.
This test is no longer valid, and the functionality is already well
tested by TestCacheThrottle. Instead of spending time rewriting this
test, let's remove it.
```
WARNING: DATA RACE
Read at 0x00c01de410fc by goroutine 735:
github.com/hashicorp/consul/agent.TestCacheRateLimit.func1()
/home/daniel/pers/code/consul/agent/agent_test.go:1024 +0x9af
github.com/hashicorp/consul/testrpc.WaitForTestAgent()
/home/daniel/pers/code/consul/testrpc/wait.go:99 +0x209
github.com/hashicorp/consul/agent.TestCacheRateLimit.func1()
/home/daniel/pers/code/consul/agent/agent_test.go:966 +0x1ad
testing.tRunner()
/usr/lib/go/src/testing/testing.go:1193 +0x202
Previous write at 0x00c01de410fc by goroutine 605:
github.com/hashicorp/consul/agent.TestCacheRateLimit.func1.2()
/home/daniel/pers/code/consul/agent/agent_test.go:998 +0xe9
Goroutine 735 (running) created at:
testing.(*T).Run()
/usr/lib/go/src/testing/testing.go:1238 +0x5d7
github.com/hashicorp/consul/agent.TestCacheRateLimit()
/home/daniel/pers/code/consul/agent/agent_test.go:961 +0x375
testing.tRunner()
/usr/lib/go/src/testing/testing.go:1193 +0x202
Goroutine 605 (finished) created at:
github.com/hashicorp/consul/agent.TestCacheRateLimit.func1()
/home/daniel/pers/code/consul/agent/agent_test.go:1022 +0x91e
github.com/hashicorp/consul/testrpc.WaitForTestAgent()
/home/daniel/pers/code/consul/testrpc/wait.go:99 +0x209
github.com/hashicorp/consul/agent.TestCacheRateLimit.func1()
/home/daniel/pers/code/consul/agent/agent_test.go:966 +0x1ad
testing.tRunner()
/usr/lib/go/src/testing/testing.go:1193 +0x202
```
The query metrics are actually reported for all read queries, not only
ones that use a MinIndex to block for updates.
Also clarify the raft.apply metric is only on the leader.
As part of this change, we ensure that the SAN extensions are marked as
critical when the subject is empty so that AWS PCA tolerates the loss of
common names well and continues to function as a Connect CA provider.
Parts of this currently hack around a bug in crypto/x509 and can be
removed after https://go-review.googlesource.com/c/go/+/329129 lands in
a Go release.
Note: the AWS PCA tests do not run automatically, but the following
passed locally for me:
ENABLE_AWS_PCA_TESTS=1 go test ./agent/connect/ca -run TestAWS
* return an invalid record when asked for an addr dns with type other then A and AAAA
* add changelog
* fix ANY use case and add a test for it
* update changelog type
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* return empty response if the question record type do not match for addr
* set comment in the right place
* return A\AAAA record in extra section if record type is not A\AAAA for addr
* Fix failing test
* remove commented code
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* use require for test validation
* use variable to init struct
* fix failing test
* Update agent/dns.go
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update .changelog/10401.txt
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update agent/dns.go
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update agent/dns.go
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update agent/dns.go
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* fix compilation error
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
With an optional interface that providers can use to indicate if they
use an intermediate cert in the primary DC.
This removes the need to look up the provider config when renewing the
intermediate.
Replace two methods with a single one that returns the cert. This moves more
of the logic into the single caller (auto-config).
tlsutil.Configurator is widely used. By keeping it smaller and focused only on storing and
returning TLS config, we make the code easier to follow.
These two methods were more related to auto-config than to tlsutil, so reducing the interface
moves the logic closer to the feature that requires it.
This method was accidentally re-introduced in an earlier rebase. It was
removed in ed1082510dc80523b1f2a3a740fa5a13c77594f9 as part of the tproxy work.
There is no interaction between these handlers, so splitting them into separate files
makes it easier to discover the full implementation of each kindHandler.
This commit extracts all the kind-specific logic into handler types, and
keeps the generic parts on the state struct. This change should make it
easier to add new kinds, and see the implementation of each kind more
clearly.
* remove flush for each write to http response in the agent monitor endpoint
* fix race condition when we stop and start monitor multiple times, the doneCh is closed and never recover.
* start log reading goroutine before adding the sink to avoid filling the log channel before getting a chance of reading from it
* flush every 500ms to optimize log writing in the http server side.
* add changelog file
* add issue url to changelog
* fix changelog url
* Update changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* use ticker to flush and avoid race condition when flushing in a different goroutine
* stop the ticker when done
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Revert "fix race condition when we stop and start monitor multiple times, the doneCh is closed and never recover."
This reverts commit 1eeddf7a
* wait for log consumer loop to start before registering the sink
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
In the absence of stats_tags to handle this pattern, when we pass
"ingress_upstream.$port" as the stat_prefix, Envoy splits up that prefix
and makes the port a part of the metric name.
For example:
- stat_prefix: ingress_upstream.8080
This leads to metric names like envoy_http_8080_no_route. Changing the
stat_prefix to ingress_upstream_80880 yields the expected metric names
such as envoy_http_no_route.
Note that we don't encode the destination's name/ns/dc in this
stat_prefix because for HTTP services ingress gateways use a single
filter chain. Only cluster metrics are available on a per-upstream
basis.
This change makes it so that the stat prefix for terminating gateways
matches that of connect proxies. By using the structure of
"upstream.svc.ns.dc" we can extract labels for the destination service,
namespace, and datacenter.
Updates to a cluster will clear the associated endpoints, and updates to
a listener will clear the associated routes. Update the incremental xDS
logic to account for this implicit cleanup so that we can finish warming
the clusters and listeners.
Fixes#10379
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.
This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
Previously we would return an error if duplicate paths were specified.
This could lead to problems in cases where a user has the same path,
say /healthz, on two different ports.
This validation was added to signal a potential misconfiguration.
Instead we will only check for duplicate listener ports, since that is
what would lead to ambiguity issues when generating xDS config.
In the future we could look into using a single listener and creating
distinct filter chains for each path/port.
These two new struct types will allow us to make polymorphic handler for each kind, instad of
having all the logic for each proxy kind on the state struct.
context.Context should never be stored on a struct (as it says in the godoc) because it is easy to
to end up with the wrong context when it is stored.
Also see https://blog.golang.org/context-and-structs
This change is also in preparation for splitting state into kind-specific handlers so that the
implementation of each kind is grouped together.
This field is available in DebugConfig, but that field is not stable and could change at any time.
The consul-k8s needs to be able to detect the primary DC for tests, so adding this field to the
stable part of the API response.
Both NextLink and NextNoBlock had the same logic, with slightly
different return values. By adding a bool return value (similar to map
lookups) we can remove the duplicate method.
The head of the topic buffer was being ignored when creating a snapshot. This commit fixes
the bug by ensuring that the head of the topic buffer is included in the snapshot
before handing it off to the subscription.
When info.Timeout is 0, it should have no timeout. Previously it was using a 0 duration timeout
which caused it to return without waiting.
This bug was masked by using a timeout in the tests. Removing the timeout caused the tests to fail.
This PR adds cluster members to the metrics API. The number of members per
segment are reported as well as the total number of members.
Tested by running a multi-node cluster locally and ensuring the numbers were
correct. Also added unit test coverage to add the new expected gauges to
existing test cases.
We have seen test flakes caused by 'concurrent map read and map write', and the race detector
reports the problem as well (prevent us from running some tests with -race).
The root of the problem is the grpc expects resolvers to be registered at init time
before any requests are made, but we were using a separate resolver for each test.
This commit introduces a resolver registry. The registry is registered as the single
resolver for the consul scheme. Each test uses the Authority section of the target
(instead of the scheme) to identify the resolver that should be used for the test.
The scheme is used for lookup, which is why it can no longer be used as the unique
key.
This allows us to use a lock around the map of resolvers, preventing the data race.
* fix tests to use a dummy nodeName and not fail when hostname is not a valid nodeName
* remove conditional testing
* add test when node name is invalid
* debug: remove the CLI check for debug_enabled
The API allows collecting profiles even debug_enabled=false as long as
ACLs are enabled. Remove this check from the CLI so that users do not
need to set debug_enabled=true for no reason.
Also:
- fix the API client to return errors on non-200 status codes for debug
endpoints
- improve the failure messages when pprof data can not be collected
Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com>
* remove parallel test runs
parallel runs create a race condition that fail the debug tests
* Add changelog
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
The bulk of this commit is moving the LeaderRoutineManager from the agent/consul package into its own package: lib/gort. It also got a renaming and its Start method now requires a context. Requiring that context required updating a whole bunch of other places in the code.
This refactor is to make it easier to see how serf feature flags are
encoded as serf tags, and where those feature flags are read.
- use constants for both the prefix and feature flag name. A constant
makes it much easier for an IDE to locate the read and write location.
- isolate the feature-flag encoding logic in the metadata package, so
that the feature flag prefix can be unexported. Only expose a function
for encoding the flags into tags. This logic is now next to the logic
which reads the tags.
- remove the duplicate `addEnterpriseSerfTags` functions. Both Client
and Server structs had the same implementation. And neither
implementation needed the method receiver.
The prior solution to call reply.Reset() aged poorly since newer fields
were added to the reply, but not added to Reset() leading serial
blocking query loops on the server to blend replies.
This could manifest as a service-defaults protocol change from
default=>http not reverting back to default after the config entry
reponsible was deleted.
* Save exposed HTTP or GRPC ports to the agent's store
* Add those the health checks API so we can retrieve them from the API
* Change redirect-traffic command to also exclude those ports from inbound traffic redirection when expose.checks is set to true.
TestACLEndpoint_Login_with_TokenLocality was reguardly being reported as failed even though
it was not failing. I took another look and I suspect it is because t.Parllel was being
called in a goroutine.
This would lead to strange behaviour which apparently confused the 'go test' runner.
- return errors in TestAgent.Start so that the retry works correctly
- remove duplicate logging, the error is returned already
- add a missing t.Helper() to retry.Run
- properly set a.Agent to nil so that subsequent retry attempts will actually try to start
Also accept an RPCInfo instead of interface{}. Accepting an interface
lead to a bug where the caller was expecting the arg to be the response
when in fact it was always passed the request. By accepting RPCInfo
it should indicate that this is actually the request value.
One caller of canRetry already passed an RPCInfo, the second handles
the type assertion before calling canRetry.
A recent change in 1.9.x inverted the order of these two lines, which caused the
X-Consul-Effective-Consistency header to be missing for the servie health endpoints
Only default to the user token and agent token for the sync. Change the
exported methods to only return the stored tokens associated with a
specific check or service.
Also fixes a bug with listing kind=mesh config entries. ValidateConfigEntryKind was only being used by
the List endpoint, and was yet another place where we have to enumerate all the kinds.
This commit removes ValidateConfigEntryKind and uses MakeConfigEntry instead. This change removes
the need to maintain two separate functions at the cost of creating an instance of the config entry which will be thrown away immediately.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Previously we would associate the address of a discovery chain target
with the discovery chain's filter chain. This was broken for a few reasons:
- If the upstream is a virtual service, the client proxy has no way of
dialing it because virtual services are not targets of their discovery
chains. The targets are distinct services. This is addressed by watching
the endpoints of all upstream services, not just their discovery chain
targets.
- If multiple discovery chains resolve to the same target, that would
lead to multiple filter chains attempting to match on the target's
virtual IP. This is addressed by only matching on the upstream's virtual
IP.
NOTE: this implementation requires an intention to the redirecting
virtual service and not just to the final destination. This is how
we can know that the virtual service is an upstream to watch.
A later PR will look into traversing discovery chains when computing
upstreams so that intentions are only required to the discovery chain
targets.
* WIP reloadable raft config
* Pre-define new raft gauges
* Update go-metrics to change gauge reset behaviour
* Update raft to pull in new metric and reloadable config
* Add snapshot persistance timing and installSnapshot to our 'protected' list as they can be infrequent but are important
* Update telemetry docs
* Update config and telemetry docs
* Add note to oldestLogAge on when it is visible
* Add changelog entry
* Update website/content/docs/agent/options.mdx
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
* Give descriptive error if auth method not found
Previously during a `consul login -method=blah`, if the auth method was not found, the
error returned would be "ACL not found". This is potentially confusing
because there may be many different ACLs involved in a login: the ACL of
the Consul client, perhaps the binding rule or the auth method.
Now the error will be "auth method blah not found", which is much easier
to debug.
Initially we were loading every potential upstream address into Envoy
and then routing traffic to the logical upstream service. The downside
of this behavior is that traffic meant to go to a specific instance
would be load balanced across ALL instances.
Traffic to specific instance IPs should be forwarded to the original
destination and if it's a destination in the mesh then we should ensure
the appropriate certificates are used.
This PR makes transparent proxying a Kubernetes-only feature for now
since support for other environments requires generating virtual IPs,
and Consul does not do that at the moment.
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.
In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:
> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.
For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.
Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
This ensures that if someone does include some extension Consul does not currently make use of, that extension is actually usable. Without linking these envoy protobufs into the main binary it can't round trip the escape hatches to send them down to envoy.
Whenenver the go-control-plane library is upgraded next we just have to re-run 'make envoy-library'.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.
Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
Previous getFromView would call view.Result when the result may not have been returned
(because the index is updated past the minIndex. This would allocate a slice and sort it
for no reason, because the values would never be returned.
Fix this by re-ordering the operations in getFromView.
The test changes in this commit were an attempt to cover the case where
an update is received but the index does not exceed the minIndex.
Also rename it to readEntry now that it doesn't return the entire entry. Based on feedback
in PR review, the full entry is not used by the caller, and accessing the fields wouldn't be
safe outside the lock, so it is safer to return only the Materializer
grpclog.SetLoggerV2 is meant to be called only once before any gRPC requests are received, but
each test that uses TestAgent will call NewBaseDeps again. Use a sync.Once to prevent the grpc
logging from being re-initialized by each test.
This will mean that a test can't use a fake logger to capture logs from the gRPC server.
These tests can flake when we get a notification for an earlier event.
Retry the read from update channel a few times to make sure we get the
event we expect.
Split the TestStreamingClient into the two logical components the real
client uses. This allows us to test multiple clients properly.
Previously writing of ctx from multiple Subscribe calls was showing a
data race.
Once this was fixed a test started to fail because the request had to be
made with a greater index, so that the store.Get call did not return
immediately.
The idleTTL was being written and read concurrently. Instead move the idleTTL to a struct
field so that when one test patches the TTL it does not impact others.
The background goroutines for the store can outlive a test because context cancellation
is async.
Setting this field to a value is equivalent to using the 'near' query paramter.
The intent is to sort the results by proximity to the node requesting
them. However with connect we send the results to envoy, which doesn't
care about the order, so setting this field is increasing the work
performed for no gain.
It is necessary to unset this field now because we would like connect
to use streaming, but streaming does not support sorting by proximity.
Remove View.Result error return value, it was always nil, and seems like it will likely always remain nill
since it is simply reading a stored value.
Also replace some cache types with local types.
And only start expiration time when the last request ends. This makes tracking expiry simpler, and
ensures that no entry can be expired while there are active requests.
Previously canRetry was attempting to retrieve this error from args, however there was never
any callers that would pass an error to args.
With the change to raftApply to move this error to the error return value, it is now possible
to receive this error from the err argument.
This commit updates canRetry to check for ErrChunkingResubmit in err.
Previously we were inconsistently checking the response for errors. This
PR moves the response-is-error check into raftApply, so that all callers
can look at only the error response, instead of having to know that
errors could come from two places.
This should expose a few more errors that were previously hidden because
in some calls to raftApply we were ignoring the response return value.
Also handle errors more consistently. In some cases we would log the
error before returning it. This can be very confusing because it can
result in the same error being logged multiple times. Instead return
a wrapped error.
Previously only a single auth method would be saved to the snapshot. This commit fixes the typo
and adds to the test, to show that all auth methods are now saved.
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
The zero value of these flags was already being excluded in the xDS
generation of circuit breaker/outlier detection config.
See: makeThresholdsIfNeeded and ToOutlierDetection.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
* add http2 ping checks
* fix test issue
* add h2ping check to config resources
* add new test and docs for h2ping
* fix grammatical inconsistency in H2PING documentation
* resolve rebase conflicts, add test for h2ping tls verification failure
* api documentation for h2ping
* update test config data with H2PING
* add H2PING to protocol buffers and update changelog
* fix typo in changelog entry
* Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled.
* Add new iptables package for applying traffic redirection rules with iptables.
* Fix bug in cache where TTLs are effectively ignored
This mostly affects streaming since streaming will immediately return from Fetch calls when the state is Closed on eviction which causes the race condition every time.
However this also affects all other cache types if the fetch call happens to return between the eviction and then next time around the Get loop by any client.
There is a separate bug that allows cache items to be evicted even when there are active clients which is the trigger here.
* Add changelog entry
* Update .changelog/9978.txt
Synthetic upstreams from service-defaults config are stored locally in
the Upstreams list. Since these come from service-defaults they should
be cleaned up locally when no longer present in the service config
response.
This is needed in case the client proxy is in TransparentProxy mode.
Typically they won't have explicit configuration for every upstream, so
this ensures the settings can be applied to all of them when generating
xDS config.
New clients in transparent proxy mode can send requests for service
config resolution without any upstream args because they do not have
explicitly defined upstreams.
Old clients on the other hand will never send requests without the
Upstreams args unless they don't have upstreams, in which case we do not
send back upstream config.
The streaming cache type for service health has no way to handle v1/health/ingress/:service queries as there is no equivalent topic that would return the appropriate data.
Ensure that attempts to use this endpoint will use the old cache-type for now so that they return appropriate data when streaming is enabled.
As part of this change the indexer will now be case insensitive by using
the lower case value. This should be safe because previously we always
had lower case strings.
This change was made out of convenience. All the other indexers use
lowercase, so we can re-use the indexFromQuery function by using
lowercase here as well.
This bug would result in the UI not having the correct settings in
Consul enterprise, which could produce many warnings in the logs.
This bug occured because the index page, which includes a map of configuration
was rendered when the HTTPHandler is first created. This PR changes the
UIServer to instead render the index page when the page is requested.
The rendering does not appear to be all that expensive, so rendering it
when requested should not cause much extra latency.
Previously we were encoding the UUID as a string, but the index it references uses a UUID
so this index can also use an encoded UUID to save a bit of memory.
Prefix queries are generally being used to match part of a partial
index. We can support these indexes by using a function that accept
different types for each subset of the index.
What I found interesting is that in the generic StringFieldIndexer the
implementation for PrefixFromArgs would remove the trailing null, but
at least in these 2 cases we actually want a null terminated string.
We simply want fewer components in the string.
Some TLS servers require SNI, but the Golang HTTP client doesn't
include it in the ClientHello when connecting to an IP address. This
change adds a new TLSServerName field to health check definitions to
optionally set it. This fixes#9473.
The TestServiceHealthEventsFromChanges function was over 1400 lines.
Attempting to debug test failures in test functions this large is
difficult. It requires scrolling to the line which defines the testcase
because the failure message only includes the line number of the
assertion, not the line number of the test case.
This is an excellent example of where test tables stop working well, and
start being a problem. To mitigate this problem, the runCase pattern can
be used. When one of these tests fails, a failure message will print the
line number of both the test case and the assertion. This allows a
developer to quickly jump to both of the relevant lines, signficanting
reducing the time it takes to debug test failures.
For example, one such failure could look like this:
catalog_events_test.go:1610: case: service reg, new node
catalog_events_test.go:1605: assertion failed: values are not equal
ResolveServiceConfig is called by service manager before the proxy
registration is in the catalog. Therefore we should pass proxy
registration flags in the request rather than trying to fetch
them from the state store (where they may not exist yet).
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
This enables it to be called for many upstreams or downstreams of a
service while only querying intentions once.
Additionally, decisions are now optionally denied due to L7 permissions
being present. This enables the function to be used to filter for
potential upstreams/downstreams of a service.
Previously this type was defined in structs, but unlike the other types in structs this type
is not used by RPC requests. By moving it to state we can better indicate that this is not
an API type, but part of the state implementation.
I added this recently without realizing that the method already existed and was named
NamespaceOrEmpty. Replace all calls to GetNamespace with NamespaceOrEmpty or NamespaceOrDefault
as appropriate.
Document that this comparison should roughly match MatchesKey
Only sort by overrideKey or service name, but not both
Add namespace to the sort.
The client side also builds a map of these based on the namespace/node/service key, so the only order
that really matters is the ordering of register/dereigster events.
Refactored out a function that can be used for both the snapshot and stream of events to translate
an event into an appropriate connect event.
Previously terminating gateway events would have used the wrong key in the snapshot, which would have
caused them to be filtered out later on.
Also removed an unused function, and some commented out code.
Health of a terminating gateway instance changes
- Generate an event for creating/destroying this instance of the terminating gateway,
duplicate it for each affected service
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
Previous to this commit, the API response would include Gateway
Addresses in the form `domain.name.:8080`, which due to the addition of
the port is probably not the expected response.
This commit rightTrims any `.` characters from the end of the domain
before formatting the address to include the port resulting in
`domain.name:8080`
Since we currently do no version switching this removes 75% of the PR
noise.
To generate all *.golden files were removed and then I ran:
go test ./agent/xds -update
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
When de-registering in anti-entropy sync, when there is no service or
check token.
The agent token will fall back to the default (aka user) token if no agent
token is set, so the existing behaviour still works, but it will prefer
the agent token over the user token if both are set.
ref: https://www.consul.io/docs/agent/options#acl_tokens
The agent token seems more approrpiate in this case, since this is an
"internal operation", not something initiated by the user.
These new functional indexers provide a few advantages:
1. enterprise differences can be isolated to a single function (the
indexer function), making code easier to change
2. as a consequence of (1) we no longer need to wrap all the calls to
Txn operations, making code easier to read.
3. by removing reflection we should increase the performance of all
operations.
One important change is in making all the function signatures the same.
https://blog.golang.org/errors-are-values
An extra boolean return value for SingleIndexer.FromObject is superfluous.
The error value can indicate when the index value could not be created.
By removing this extra return value we can use the same signature for both
indexer functions.
This has the nice properly of a function being usable for both indexing operations.
By using a new pattern for more specific indexes. This allows us to use
the same index for both service checks and node checks. It removes the
abstraction around memdb.Txn operations, and isolates all of the
enterprise differences in a single place (the indexer).
* A GET of the /acl/auth-method/:name endpoint returns the fields
MaxTokenTTL and TokenLocality, while a LIST (/acl/auth-methods) does
not.
The list command returns a filtered subset of the full set. This is
somewhat deliberate, so that secrets aren't shown, but the TTL and
Locality fields aren't (IMO) security critical, and it is useful for
the front end to be able to show them.
For consistency these changes mirror the 'omit empty' and string
representation choices made for the GET call.
This includes changes to the gRPC and API code in the client.
The new output looks similar to this
curl 'http://localhost:8500/v1/acl/auth-methods' | jq '.'
{
"MaxTokenTTL": "8m20s",
"Name": "minikube-ttl-local2",
"Type": "kubernetes",
"Description": "minikube auth method",
"TokenLocality": "local",
"CreateIndex": 530,
"ModifyIndex": 530,
"Namespace": "default"
}
]
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Add changelog
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Replace the large table of tests with individual calls to run(). By using
runCase, failure messages will include the line number for the test case, as
well as a line number from the test functions.
Example:
=== FAIL: agent/config TestLoad_IntegrationWithFlags/failing_case (0.01s)
runtime_test.go:4721: case: failing case
runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"
Previous:
runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"
Without the line number to the testCase data, debugging these tests is
difficult. It is impossible to jump directly to the test case, and
difficult to find the location because of many similarly named cases.
AEInterval is overridden by NonUserSource, so there is no way for a user
to set this value. These two cases represented impossible real world
scenarios.
Instead the test is replaced with one that shows that the AEInterval can
not be set by config.
This change allows us to remove the hcltail and jsontail fields from
testCase
Previously a snapshot created as part of a resumse-stream request could have incorrectly
cached the newSnapshotToFollow event. This would cause clients to error because they
received an unexpected framing event.
So that all the client side filtering is in the same place. Previously
only the bexpr filter was in the cache-entry.
Also makes a small change to the filtering so that instead of rebuilding
slices of items, the filtering can return a bool to determine if the
event payload is saved or not.
Send empty array [] instead of [""] in DNS requests when TagFilter is not set
Do not change case sensitivity of services anymore in `getServiceNodes()` since
cache keys are now case insensitive
10 minutes is the default blocking query timeout. Using the same value results in us hitting
the expired cache entry bug frequently. By extending this TTL we at least mitigate the problem.
The underlying bug still needs to be fixed.
The materializer is often reset when an error is received. By resetting
the retryWaiter we effectively never wait. The retryWaiter should only
be reset when we get an event without error. This is done in
Materializer.updateView().
Streaming can not be used for these queries because the near query
paramter indicates a specific sort of the results, and that sort
requires data that is not available to the client from the streaming
API.
This fixes an issue where leaf certificates issued in primary
datacenters using Vault as a Connect CA would be reissued very
frequently (every ~20 seconds) because the logic meant to detect root
rotation was errantly triggering.
The hash of the rootCA was being compared against a hash of the
intermediateCA and always failing. This doesn't apply to the Consul
built-in CA provider because there is no intermediate in use in the
primary DC.
This is reminiscent of #6513
In a situation where the mesh gateway is configured to bind to multiple
network interfaces, we use a feature called 'tagged addresses'.
Sometimes an address is duplicated across multiple tags such as 'lan'
and 'lan_ipv4'.
There is code to deduplicate these things when creating envoy listeners,
but that code doesn't ensure that the same tag wins every time. If the
winning tag flaps between xDS discovery requests it will cause the
listener to be drained and replaced.
registerSchema creates some indirection which is not necessary in this
case. newDBSchema can call each of the tables.
Enterprise tables can be added from the existing withEnterpriseSchema
shim.
Deadlock scenario:
1. Due to scheduling, the state runner sends one snapshot into
snapCh and then attempts to send a second. The first send succeeds
because the channel is buffered, but the second blocks.
2. Separately, Manager.Watch is called by the xDS server after
getting a discovery request from Envoy. This function acquires the
manager lock and then blocks on receiving the CurrentSnapshot from
the state runner.
3. Separately, there is a Manager goroutine that reads the snapshots
from the channel in step 1. These reads are done to notify proxy
watchers, but they require holding the manager lock. This goroutine
goes to acquire that lock, but can't because it is held by step 2.
Now, the goroutine from step 3 is waiting on the one from step 2 to
release the lock. The goroutine from step 2 won't release the lock until
the goroutine in step 1 advances. But the goroutine in step 1 is waiting
for the one in step 3. Deadlock.
By making this send non-blocking step 1 above can proceed. The coalesce
timer will be reset and a new valid snapshot will be delivered after it
elapses or when one is requested by xDS.
This allows setting ForceWithoutCrossSigning when reconfiguring the CA
for any provider, in order to forcibly move to a new root in cases where
the old provider isn't reachable or able to cross-sign for whatever
reason.
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.
* use separate files in testdata/ dir to store the config source.
Separate files are much easier to edit because editors can syntax
highlight json/hcl, and it makes strings easier to find. Previously
trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
nonZero works.
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.
The three arguments are reduced to a single argument by moving the other
two into the options struct.
The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
Previously the ServiceManager had to run a separate goroutine so that it could block on a channel
send/receive instead of a lock. Using this mutex with TryLock allows us to cancel the lock when
the serviceConfigWatch is stopped.
Without this change removing the ServiceManager.Start goroutine would not be possible because
when AddService is called it acquires the stateLock. While that lock is held, if there are
existing watches for the service, the old watch will be stopped, and the goroutine holding the
lock will attempt to wait for that watcher goroutine to exit.
If the goroutine is handling an update (serviceConfigWatch.handleUpdate) then it can block on
acquiring the stateLock and deadlock the agent. With this change the context is cancelled as
and the goroutine will exit instead of waiting on the stateLock.
The ServiceManager.Start goroutine was used to serialize calls to
agent.addServiceInternal.
All the goroutines which sent events to the channel would block waiting
for a response from that same goroutine, which is effectively the same
as a synchronous call without any channels.
This commit removes the goroutine and channels, and instead calls
addServiceInternal directly. Since all of these goroutines will need to
take the agent.stateLock, the mutex handles the serializing of calls.
Move the field into the struct for addServiceLocked. Also don't require
setting a default value, so that the callers can leave it as nil if they
don't already have a snapshot.
Replace with the existing AddServiceRequest struct. These structs are
almost identical. Additionally, the only reason the serviceRegistration
struct existed was to recreate an AddServiceRequest.
By storing and re-using the AddServiceRequest we remove the need to
translate into one type and back to the original type.
We also remove the extra parameters to a function, because those values
are already available from the AddServiceRequest field.
Also a minor optimization to only call tokens.AgentToken() when
necessary. Previous it was being called every time, but the value was
being ignored if the AddServiceRequest had a token.
Handle the decision to use ServiceManager in a single place. Instead of
calling ServiceManager.AddService, then calling back into
addServiceInternal, only call ServiceManager.AddService if we are going
to use it.
This change removes some small duplication and removes a branch from the
AddService flow.
The temprorary variables make it much harder to trace where and how struct
fields are used. If a field is only used a small number of times than
refer to the field directly.
The method is only used in tests, and only exists for legacy calls.
There was one other package which used this method in tests. Export
the AddServiceRequest and a couple of its fields so the new function can
be used in those tests.
This way we only have to wait for the serf barrier to pass once before
we can make use of federation state APIs Without this patch every
restart needs to re-compute the change.
* Add templating to inject JSON into an application/json script tag
Plus an external script in order to pick it out and inject the values we
need injecting into ember's environment meta tag.
The UI still uses env style naming (CONSUL_*) but we uses the new style
JSON/golang props behind the scenes.
Co-authored-by: Paul Banks <banks@banksco.de>
In some circumstances this endpoint will have no results in it (dues to
ACLs, Namespaces, filtering or missing configuration).
This ensures that the response is at least an empty array (`[]`) rather
than `null`
These expectations are optional because in a slow CI environment the deadline to cancell the context might occur before the go routine reaches issuing the RPC. Either way we are successfully ensuring context cancellation is working.
Deleting from memdb inside an interation can cause a panic from Iterator.Next. This
case is technically safe (for now) because the iterator is using the root radix tree
not a modified one.
However this could break at any time if someone adds an insert or delete to the coordinates table
before this place in the function.
It also sets a bad example, because generally deletes in an interator are not safe. So this
commit uses the pattern we have in other places to move the deletes out of the iteration.
After fixing that bug I uncovered a couple more:
Fix an issue where we might try to cross sign a cert when we never had a valid root.
Fix a potential issue where reconfiguring the CA could cause either the Vault or AWS PCA CA providers to delete resources that are still required by the new incarnation of the CA.
Using withEnterpriseSchema() we can apply any enterprise schema changes
with a single shim, removing the need to duplicate all of the table
definitions.
Also move all the catalog schemas to a new file to shrink catalog.go a bit.
I believe this commit also fixes a bug. Previously RPCMaxConnsPerClient was not being re-read from the RuntimeConfig, so passing it to Server.ReloadConfig was never changing the value.
Also improve the test runtime by not doing a lot of unnecessary work.
The field was not being included in the cache info key. This would result in a DNS request for
web.service.consul returning the same result as web.ingress.consul, when those results should
not be the same.
include all fields when fuzzing in tests
split tests by struct type
Ensure the new value for the field is different
fuzzer.Fuzz could produce the same value again in some cases.
Use a custom fuzz function for QueryOptions. That type is an embedded struct in the request types
but only one of the fields is important to include in the cache key.
Move enterpriseMetaField to an oss file so that we can change it in enterprise.
* Fix bug in usage metrics that caused a negative count to occur
There were a couple of instances were usage metrics would do the wrong
thing and result in incorrect counts, causing the count to attempt to
decrement below zero and return an error. The usage metrics did not
account for various places where a single transaction could
delete/update/add multiple service instances at once.
We also remove the error when attempting to decrement below zero, and
instead just make sure we do not accidentally underflow the unsigned
integer. This is a more graceful failure than returning an error and not
allowing a transaction to commit.
* Add changelog
This change allows us to re-use these functions in other places without the Builder, and makes it
more explicit about which functions can warn/error and which can not.
A golden file makes the expected value easier to work with. This change also
removes a number of shims for enterprise and replaces them with a single one
for the golden filename.
* Display a warning when rpc.enable_streaming = true is set on a client
This option has no effect when running as an agent
* Added warning when server starts with use_streaming_backend but without rpc.enable_streaming
* Added unit test
It is no safe to assumes that the mapstructure keys will contain all the keys because some config can be specified
with command line flags or literals.
This change allows us to remove the json marshal/unmarshal cycle for command line flags, which will allow
us to remove all of the hcl/json struct tags on config fields.
These types are used as values (not pointers) in other structs. Using a pointer receiver causes
problems when the value is printed. fmt will not call the String method if it is passed a value
and the String method has a pointer receiver. By using a value receiver the correct string is printed.
Also remove some unused methods.
TestEnvoy.Close used e.stream.recvCh == nil to indicate the channel had already
been closed, so that TestEnvoy.Close can be called multiple times. The recvCh
was not protected by a lock, so setting it to nil caused a data race with any
goroutine trying to read from the channel.
Instead set the stream to nil. The stream is guarded by a lock, so it does not race.
This change allows us to test the agent/xds package using -race.
This way we only have to wait for the serf barrier to pass once before
we can upgrade to v2 acls. Without this patch every restart needs to
re-compute the change, and potentially if a stray older node joins after
a migration it might regress back to v1 mode which would be problematic.
Daniel Nephin