10c5f11315
Retry periodically for 60s if syslog setup fails ( #2455 )
2016-10-31 17:24:00 -07:00
440611f9f7
Add snapshot inspect subcommand ( #2451 )
2016-10-31 19:37:27 -04:00
d5ee327fea
More flaky unit test fixes ( #2449 )
...
* More flaky unit test fixes
* Raise some test timeouts that were too low
2016-10-31 09:59:20 -07:00
efb8f84922
Added tests for lookups on the 'addr.consul' domain
2016-10-27 21:04:06 -07:00
9069deb792
Add a service address SRV lookup test for IPv6
2016-10-27 21:04:06 -07:00
5888b4f7bf
Fix test cases
2016-10-27 21:04:06 -07:00
b72bccc1c4
Give the service address in SRV lookup when it differs from the node's
2016-10-27 21:04:06 -07:00
de308e75e1
Resolve Consul CNAME records on external services ( #2444 )
2016-10-26 19:23:51 -07:00
bc29610124
Adds support for snapshots and restores. ( #2396 )
...
* Updates Raft library to get new snapshot/restore API.
* Basic backup and restore working, but need some cleanup.
* Breaks out a snapshot module and adds a SHA256 integrity check.
* Adds snapshot ACL and fills in some missing comments.
* Require a consistent read for snapshots.
* Make sure snapshot works if ACLs aren't enabled.
* Adds a bit of package documentation.
* Returns an empty response from restore to avoid EOF errors.
* Adds API client support for snapshots.
* Makes internal file names match on-disk file snapshots.
* Adds DC and token coverage for snapshot API test.
* Adds missing documentation.
* Adds a unit test for the snapshot client endpoint.
* Moves the connection pool out of the client for easier testing.
* Fixes an incidental issue in the prepared query unit test.
I realized I had two servers in bootstrap mode so this wasn't a good setup.
* Adds a half close to the TCP stream and fixes panic on error.
* Adds client and endpoint tests for snapshots.
* Moves the pool back into the snapshot RPC client.
* Adds a TLS test and fixes half-closes for TLS connections.
* Tweaks some comments.
* Adds a low-level snapshot test.
This is independent of Consul so we can pull this out into a library
later if we want to.
* Cleans up snapshot and archive and completes archive tests.
* Sends a clear error for snapshot operations in dev mode.
Snapshots require the Raft snapshots to be readable, which isn't supported
in dev mode. Send a clear error instead of a deep-down Raft one.
* Adds docs for the snapshot endpoint.
* Adds a stale mode and index feedback for snapshot saves.
This gives folks a way to extract data even if the cluster has no
leader.
* Changes the internal format of a snapshot from zip to tgz.
* Pulls in Raft fix to cancel inflight before a restore.
* Pulls in new Raft restore interface.
* Adds metadata to snapshot saves and a verify function.
* Adds basic save and restore snapshot CLI commands.
* Gets rid of tarball extensions and adds restore message.
* Fixes an incidental bad link in the KV docs.
* Adds documentation for the snapshot CLI commands.
* Scuttle any request body when a snapshot is saved.
* Fixes archive unit test error message check.
* Allows for nil output writers in snapshot RPC handlers.
* Renames hash list Decode to DecodeAndVerify.
* Closes the client connection for snapshot ops.
* Lowers timeout for restore ops.
* Updates Raft vendor to get new Restore signature and integrates with Consul.
* Bounces the leader's internal state when we do a restore.
2016-10-25 19:20:24 -07:00
107f4ff878
Agent anti-entropy test fixes
2016-10-25 17:48:11 -07:00
61311cff80
Test fixes ( #2434 )
...
* Test fixes in health_endpoint_test.go, agent_endpoint_test.go and rtt_test.go
* Don't reuse the same agent config in TestAgent_ReconnectConfigSettings
2016-10-25 13:46:54 -07:00
dace771f06
Merge pull request #2389 from hashicorp/jbs-2019
...
Lower Service tag DNS warning to DEBUG for #2019
2016-10-24 17:05:02 -07:00
6f01227963
Centralize command-line parsing
2016-10-13 18:03:29 -04:00
377ce12e53
Removes reap config option.
2016-10-06 21:45:18 -07:00
36e1a194c2
Lower Service tag DNS warning to DEBUG for #2019
2016-10-05 08:45:01 -04:00
ae5bd0f2cc
agent: Stop reaping child processes ( resolves #1988 )
...
The consul docker image now uses dumb-init to reap child processes, so
there's no need to reap them ourselves.
2016-10-04 09:36:41 -06:00
74e35b1f48
Fix kv put flags
2016-09-26 16:13:39 -07:00
90f4953b47
Fix up kv put help output
2016-09-26 16:11:23 -07:00
8ac6877f20
Remove debugging code
2016-09-26 16:09:35 -07:00
70fd7efde9
Fix CAS operations for put
2016-09-26 16:06:56 -07:00
46f4093f14
Change delete CAS behavior to require ModifyIndex
2016-09-26 16:06:55 -07:00
738f12329a
Fix copy-paste comments
2016-09-26 16:06:54 -07:00
ce5c820c4a
Add kv delete command
2016-09-26 16:06:53 -07:00
d5dd8ef7a1
Add kv put command
2016-09-26 16:06:53 -07:00
a8dc0f86b6
Add kv get
2016-09-26 16:06:53 -07:00
cd8ac28a87
Add kv command stubs
2016-09-26 16:06:53 -07:00
ec16f75124
Add test function for returning an API client
2016-09-26 16:06:52 -07:00
5eb4c94bde
Runs go-fmt (incidental to this PR).
2016-09-23 17:44:14 -07:00
36db92932a
Makes string search for Windows case-insensitive.
...
Fixes #2356 .
2016-09-23 17:43:40 -07:00
a477481ad3
Merge pull request #2353 from hashicorp/b-local-panic
...
Cleans up state management for remote deletes from local state.
2016-09-22 12:56:08 -07:00
6f1050a181
Calls remove on checks and services in the local test.
2016-09-22 11:41:17 -07:00
434233a131
Cleans up state management for remote deletes from local state.
...
Fixes #2125 .
2016-09-21 16:52:43 -07:00
41b0115ee6
Merge pull request #2262 from WIZARD-CXY/master
...
Fixes go race bug in startup log buffering.
2016-09-20 17:24:52 -07:00
f9e001cb6e
return an error if no logOutput is provided
...
Otherwise the code will panic at a later stage where it is more complicated to figure out what’s actually going on.
2016-09-17 17:46:13 +09:00
aed72ccc60
Merge pull request #2263 from sweeneyb/dnsPort
...
Add support for dns port as a command line option
2016-09-01 22:16:15 -07:00
4819cf3a52
Does some go fmt cleanup.
2016-09-01 22:14:19 -07:00
1924eccf71
Merge pull request #2322 from hashicorp/pr-2321-slackpad
...
Adds a configurable timeout for DNS recursor client.
2016-09-01 22:11:54 -07:00
314bd1363c
Adds a recursor timeout line to the merge test.
2016-09-01 21:53:33 -07:00
3f3bb444fa
Fixes a typo in a test error message.
2016-09-01 21:52:29 -07:00
2682410059
Merge remote-tracking branch 'upstream/master'
2016-09-01 10:15:32 -04:00
d419a0ae0d
Changes default for `leave_on_terminate` based on server or client mode.
2016-08-31 23:39:11 -07:00
5e4db081f7
Removes Raft types from public API interface.
...
This will cause a lot of breakage because we've currently vendored a
branch of the Raft library.
2016-08-30 14:59:16 -07:00
3304352272
Changes default DNS allow_stale to true.
2016-08-30 13:55:19 -07:00
6be1e07fec
Makes the Raft configuration API easier to consume.
2016-08-30 11:30:56 -07:00
1b7a16b7d3
Adds new consul operator endpoint, CLI, and ACL and some basic Raft commands.
2016-08-30 00:02:50 -07:00
6acb742c08
Fixed code formatting
2016-08-29 17:29:23 -04:00
b97500234d
Made the dns recursor timeout test more reliable
2016-08-29 13:23:14 -04:00
3d5c2609e7
Renamed dns config parameter internal_client_timeout for recursor_timeout
2016-08-26 15:22:04 -04:00
0895e48106
Merge remote-tracking branch 'pierre/master'
2016-08-26 15:12:38 -04:00
6f030a1167
Tweaks formatting of Consul version.
2016-08-25 17:12:55 -07:00
5df4fffd09
Merge pull request #2303 from hashicorp/f-tunes
...
Adds performance tuning capability for Raft, detuned defaults, and supplemental docs.
2016-08-25 15:45:49 -07:00
2f4c237cff
Adds a max raft multiplier and tweaks documentation.
2016-08-25 15:36:05 -07:00
5df36fbd82
Stops scaling the commit timeout.
2016-08-25 15:05:40 -07:00
40f3470696
Redacts the Circonus API token from stats JSON.
2016-08-24 23:27:25 -07:00
b339b0d2fc
Adds performance tuning capability for Raft, detuned defaults, and supplemental docs.
2016-08-24 21:58:37 -07:00
17b6a18c37
Added a configurable timeout to the client making DNS queries to downstream name servers
2016-08-23 16:59:38 -04:00
2aeaf35c41
Removed bad error message for health check status.
2016-08-17 17:54:09 -07:00
0bdbdf1ba8
Merge pull request #2226 from abhinavdahiya/rm-health-unknown
...
Fixes #1775 ; Removes 'unknown' state
2016-08-17 17:51:04 -07:00
5f5e0b3e76
Makes protocol version a little clearer.
2016-08-17 11:29:09 -07:00
db9a72dde1
Merge branch 'master' into f-deregister-critical
2016-08-16 12:53:21 -07:00
607595f99e
Cleans up based on code review feedback.
2016-08-16 12:52:30 -07:00
bc333335be
Adds an `X-Consul-Translate-Addresses` to signal translation is enabled.
2016-08-16 11:31:41 -07:00
817d7e93e4
Adds an "lan" tagged address so we have a way to get them all.
...
If we didn't have this, then there would be no way to know the LAN
address if address translation was turned on.
2016-08-16 10:49:03 -07:00
b4f981c837
Adds ability to deregister a service based on critical check state longer than a timeout.
2016-08-16 01:00:26 -07:00
12e6db464b
Tweaks the WAN address translation unit tests.
2016-08-15 15:34:11 -07:00
c066c2e70a
Factors translate out into a separate file and makes safe for in-memory RPCs.
2016-08-15 15:05:02 -07:00
07d141570c
Update gated_writer.go
2016-08-14 16:36:21 +08:00
360e196c93
Translate Address to tagged WAN address in HTTP API when appropriate.
2016-08-12 18:25:36 -07:00
8e8f840169
Updates built-in UI static assets to latest.
2016-08-12 18:01:59 -07:00
4915790bdc
Runs `go fmt`.
2016-08-12 17:26:23 -07:00
6c4a8d8383
Tweaks DNS prepared query failover unit test.
2016-08-12 17:16:08 -07:00
90f49354d6
Corrects two issues with DNS prepared query failover
...
When DNS prepared query fails over to another datacenter and the datacenter
returns some nodes, the DNS result does not translate WAN addresses even when
translation is enabled for SRV and A queries, and returns the wrong datacenter
(the one that failed over) for SRV queries.
2016-08-12 17:06:43 -07:00
a379078e3e
Merge pull request #2267 from hashicorp/b-srv-trim
...
Fixes bug when trimming DNS SRV records.
2016-08-12 14:57:20 -07:00
a666dc44b3
Passes the index by reference so we can control the allocation.
2016-08-12 14:51:50 -07:00
de95fe8638
Makes name compares case-insensitive.
2016-08-12 12:16:21 -07:00
291a468c87
Validate gossip encryption key before made persistent in local.keyring
2016-08-12 11:42:45 -07:00
45e2879eb5
Avoids allocations and function calls if no extra data is present.
2016-08-12 10:29:57 -07:00
e05c77b9bf
Renames "seen" to "resolved".
2016-08-11 22:01:57 -07:00
6c22c48326
Fixes the DNS SRV trim bug.
2016-08-11 21:46:14 -07:00
086a5af5ff
Finishes up DNS compression by adding opt-out, tests, and documentation. Fixes trim routine.
2016-08-11 16:27:08 -07:00
f31f1c04e9
Fix panic where r.Compress would be set before checking for errors.
2016-08-11 16:27:08 -07:00
6d17b4eb67
Compress all DNS responses to prevent them from going over the 512 byte
...
limit from RFC 1035
2016-08-11 16:27:08 -07:00
f471c6e2ad
Merge pull request #2264 from hashicorp/pr-2045-slackpad
...
Enables stale mode for watchers.
2016-08-10 15:58:34 -07:00
32cf81e59c
Fixes a typo and adds stale documentation to website.
2016-08-10 15:46:28 -07:00
e8117ba622
Add support for dns port as a command line option
2016-08-10 04:05:56 +00:00
53009f2466
fix go race bug
2016-08-10 10:44:20 +08:00
b566c094bb
Updates bindata after vendor update.
2016-08-09 19:03:10 -07:00
f00e49112a
Installs a wrapper around HTTP endpoints that generate metrics.
2016-08-09 15:41:15 -07:00
3585b5a4cb
Merge pull request #2237 from hashicorp/f-acl-replication
...
Adds ACL replication.
2016-08-09 11:42:16 -07:00
2acb287690
Fixes JS exception when there are no coordinates present.
2016-08-08 17:38:22 -07:00
4a931ae12e
Adds an ACL replication status endpoint.
2016-08-04 23:30:16 -07:00
c4ae68010b
Hides the acl_replication_token from JSON output, like in /v1/agent/self.
2016-08-03 21:24:09 -07:00
9cece515c0
Adds basic ACL replication plumbing.
2016-08-03 21:24:04 -07:00
40d1c279dd
atomic write service state and checks files, fixes #1221
2016-08-03 10:34:12 -05:00
b2ad8114fe
Remove redundant hardcoded environment variables
...
The following hardcoded environment variables are removed:
* CONSUL_RPC_ADDR
* CONSUL_HTTP_ADDR
2016-08-03 14:40:26 +08:00
9dc52449e3
Fixes #1775 ; Removes 'unknown' state
...
Signed-off-by: Abhinav Dahiya <abhinavdtu2012@gmail.com>
2016-07-30 19:33:14 +05:30
72208b6929
Merge pull request #2207 from grange74/leave-command-args-check
...
add extra check for unexpected args to leave command
2016-07-23 14:52:13 -07:00
63ec2dd465
add extra check for unexpected args to leave command
2016-07-24 00:36:59 +10:00
5d83d507b4
Adds consul info data into /v1/agent/self endpoint.
2016-07-20 15:12:26 -07:00
4a7b55c8cb
Fixes startup version print to show the human version.
2016-07-20 08:09:05 -07:00
9816c995bd
Adds version info back into the config.
...
In #2191 I accedentally broke SCADA by not populating the agent's version
information into the config structure. This adds it back, and makes the
distinction between the raw parts we send to APIs and the human form of
the version that we display.
2016-07-19 18:38:15 -07:00
51fbad91fd
Merge pull request #2193 from hashicorp/pr-2188-slackpad
...
Adds Circonus support for telemetry metrics.
2016-07-19 17:15:29 -07:00
ca5f42d61d
Tweaks the docs a bit.
2016-07-19 15:54:52 -07:00
9b36671fd6
Removes top-level key support for Circonus configs.
...
This was a feature to help migrate to the new telemetry sub-structure,
but since this is all new we don't need it.
2016-07-19 15:46:57 -07:00
53877aa260
Makes sure version is always displayed consistently.
2016-07-19 15:06:32 -07:00
f11a0145ab
RH: Add revision (if it exists)
2016-07-19 10:04:56 +01:00
87e29fd709
fix: typo coupled, default token app to "consul", switch submit_interval/SubmitInterval to submission_interval/SubmissionInterval
2016-07-18 15:46:11 -04:00
c5a6cb8b4c
Add Circonus support for Telemetry metrics
2016-07-18 09:34:43 -04:00
c2b78eac7d
Add the version (from config) to the Starting Consul Agent printout
2016-07-18 10:01:16 +01:00
c5b30cba6f
Merge branch 'master' into let-watches-be-stale
...
Attempt to let the tests pass
2016-07-13 11:20:44 -07:00
62d0edbdd4
Merge pull request #1847 from mssola/dc-to-datacenter
...
[proposal] command: deprecated the -dc flag in the agent CLI
2016-07-05 13:01:51 -07:00
e9960e6c85
Merge pull request #2137 from hashicorp/f-pq-near
...
Support "near" parameter in prepared query service block
2016-07-01 12:28:48 -07:00
134f66e3d4
agent: parseSource still subs for _agent
2016-07-01 10:04:58 -07:00
5089561b1b
agent: test that DNS passes the agent data through
2016-07-01 09:46:26 -07:00
ebacaa2d67
consul: send agent source data as separate query source
2016-06-30 16:51:18 -07:00
ec8ade1800
agent: always pass local agent query source, allow override
2016-06-30 12:11:48 -07:00
aae9c2eb30
agent: fix test
2016-06-21 16:28:26 -07:00
270270a33a
consul: send origin node + dc when executing prepared queries
2016-06-21 15:34:26 -07:00
114e57fff1
consul: use the Near field instead of PreferLocal
2016-06-21 12:39:40 -07:00
f9e2900692
Merge pull request #2131 from hashicorp/b-misc-microoptimizations
...
Misc micro optimizations
2016-06-21 09:59:01 -07:00
949829295a
Pack Port to be slightly more optimal in terms of struct memory usage.
2016-06-20 15:31:17 -07:00
c90fc057d4
Give log reviewers a hint as to which check is failing
2016-06-20 15:25:21 -07:00
8baf0d7a95
Use stable, monotonically increasing port numbers for tests
2016-06-20 14:33:46 -07:00
89660879a0
agent: set origin during PQ execution
2016-06-20 14:24:42 -07:00
7482a9207d
Chase casting types.CheckID to a string into the state_store.
...
It turns out the indexer can only use strings as arguments when
creating a query. Cast `types.CheckID` to a `string` before calling
into `memdb`.
Ideally the indexer would be smart enough to do this at compile-time,
but I need to look into how to do this without reflection and the
runtime package. For the time being statically cast `types.CheckID`
to a `string` at the call sites.
2016-06-07 16:59:02 -04:00
ff45f8c8ff
Revert "Move `structs.CheckID` to a new top-level package, `types`."
...
This reverts commit 2bbd52e3b44ff1b60939a8400264d534662d6d51.
2016-06-07 16:59:02 -04:00
a4554b945c
Move `structs.CheckID` to a new top-level package, `types`.
...
Per discussion w/ @slackpad, move this type to its own top-level package
2016-06-07 16:59:02 -04:00
cd68cd3868
Move `structs.CheckID` to a new top-level package, `types`.
...
Per discussion w/ @slackpad, move this type to its own top-level package
2016-06-07 16:59:02 -04:00
0857e93d0b
Float a type balloon. Some strings are square pegs in round holes.
...
This experiment was brought about because of variable naming
confusion where name and checkIDs were interchanged. Gave CheckID
an Qualified Type Name and chased downstream changes.
2016-06-07 16:59:02 -04:00
1955eadc12
Updates web assets to pull in RTT viz.
2016-06-07 09:32:44 -07:00
5f334d94fa
Removes stale scada client and test sections that use (now) unexported fields.
...
Fixes #2092 .
2016-06-06 19:18:31 -07:00
e061d89fe9
Use upstream high-level SCADA provider
2016-06-01 18:25:39 -04:00
53c14e139f
Parse ACL tokens for the catalog register/deregister endpoints
...
Fix #1738
2016-05-17 13:16:33 -04:00
ffcba3df58
Merge pull request #2028 from hashicorp/f-atomic-kv
...
Adds support for atomic transactions spanning multiple KV entries.
2016-05-15 13:46:05 -07:00
d25ab4440d
Remove completely unused structs
2016-05-15 09:14:36 -07:00
b20f86b4c7
Speling police
2016-05-15 09:13:52 -07:00
c786e1d457
Reduces the number of operations in a transaction to 64.
2016-05-14 21:40:46 -07:00
a11f32a1da
Adds a get-tree verb to KV transaction operations.
2016-05-13 16:57:39 -07:00
77ae55c692
Adds some size limiting features to transactions to help prevent abuse.
2016-05-13 13:39:01 -07:00
2649a6336e
Adds a read-only optimized path for transactions.
2016-05-13 00:34:05 -07:00
2ed48480e9
Hoists KV processing helper functions up as static functions.
2016-05-12 16:10:06 -07:00
1c8d20ba6a
allow automatically discovering aws ec2 consul servers
2016-05-11 19:41:41 -06:00
3d35acaa90
De-nests the KV output structure (removes DirEnt member).
2016-05-11 13:48:03 -07:00
04a13ec3d7
Switches to "KV" instead of "KV" for the KV operations.
2016-05-11 10:58:27 -07:00
dc662f7e35
Refactors TxnRequest/TxnResponse into a form that will allow non-KV ops.
...
This isn't needed/used yet, but it's a good hook to get in there so we
can add more atomic operations in the future. The Go API hides this detail
so that feels like a KV-specific API. The implications on the REST API are
pretty minimal.
2016-05-11 01:39:10 -07:00
d980cbcd9d
Moves txn code into a new endpoint, not specific to KV.
2016-05-10 21:58:02 -07:00
54b930103c
Terminates pretty responses with a newline.
2016-05-10 20:02:36 -07:00
15a331d36c
Adds unit tests for HTTP endpoint.
2016-05-10 12:59:34 -07:00
bf2760ac18
Enable Stale mode for watchers
...
Solves https://github.com/hashicorp/consul/issues/917 by giving consul
watch a `-stale` flag
2016-05-10 00:09:15 -07:00
471160d8f0
Performs basic plumbing of KVS transactions through all the layers.
2016-05-09 22:15:49 -07:00
b34b1f85aa
Include the current version along side the available version.
...
When checkpoint emits a log message indicating an agent is out of
date, include the current version along with the available version
according to checkpoint.
Inspired by: log output in #993
2016-05-04 22:57:44 -07:00
0f7f07d2f5
Fixes some bad error returns in the persist service and check paths.
2016-04-26 15:03:26 -07:00
03b0c196e0
Merge pull request #1762 from mshean/script-timeout
...
Add Timeout field to CheckMonitor
2016-04-24 23:08:06 -07:00
65f9017c63
Update Check API to use constants
...
Use constants where appropriate to advocate their use. Also add a deprecation notice re: `updateTTL`.
2016-04-23 16:01:59 -07:00
6182a34600
Merge pull request #1935 from hashicorp/f-reap-time
...
Makes reap time configurable for LAN and WAN.
2016-04-20 13:50:21 -07:00
bc6efbae18
Sets an anti-footgun floor for the configurable reap time.
2016-04-20 13:49:51 -07:00
7e617d6086
add Timeout field to CheckMonitor
2016-04-20 11:41:30 -07:00
9e82074f49
agent: limit HTTP check output to 4k
2016-04-14 14:28:07 -07:00
79153c3014
Merge pull request #1884 from mtchavez/1541-data-dir-perms
...
command: Data directory permission error message
2016-04-12 22:06:49 -07:00
422adaf168
Makes a detached copy of the tags when doing the override.
2016-04-11 14:53:18 -07:00
50e1d661ad
Tweaks comment about side effects.
2016-04-11 08:58:17 -07:00
32389a9822
Makes reap time configurable for LAN and WAN.
2016-04-11 00:38:25 -07:00
c1c8a0b70c
Merge pull request #1934 from hashicorp/b-check-output
...
Syncs a check's output with the catalog when output rate limiting isn't in effect.
2016-04-11 00:37:50 -07:00
9773cc28ca
Uses the HealthCheck Clone() method in local_test.go.
2016-04-11 00:20:24 -07:00
3f340716fd
Adds a clone method to HealthCheck and uses that in local.go.
2016-04-11 00:05:39 -07:00
f6fe6a2197
Syncs a check's output with the catalog when output rate limiting isn't in effect.
2016-04-10 21:20:39 -07:00
b89c2063bd
#1878 Set default bind address to 127.0.0.1 in development mode
2016-04-07 21:25:33 +03:00
07e7d551f9
Removes a bogus warning for Windows.
2016-04-05 18:04:23 -07:00
419a90031f
Updates static assets to pull in #1702 .
2016-04-04 12:21:23 -07:00
80cfe3d1ab
Clean up verifyUniqueListners
...
The first pass over this was a hackjob in the sense that it was not elegant. Fixed.
Pointed out by: subcionscious in the middle of the night
2016-04-04 11:03:49 -07:00
f75c0f4390
Retry http server connecting in agent/http_test
2016-04-01 19:17:38 -07:00
09f962a75b
Test agent RPC client connection retries
2016-04-01 19:17:38 -07:00
10f297e8fc
command: Data directory permission error message
...
* Check for invalid data directory permissions
* Display appropriate permissions error message
* Add command test for bad data directory permissions
2016-04-01 19:17:38 -07:00
fca71e1974
Rely exclusively on error to signal failure
...
Pointed out by: slackpad
2016-04-01 10:34:45 -07:00
4660cb969f
Print a helpful message re: duplicate addresses
...
IP sockets provide nice endpoints where the kernel will fail to bind and will error out saying socket already in use. UNIX sockets, however, don't enjoy this nice property when cleaning up stale sockets on listen. Given the number of addresses in Consul, provide operators with a helpful message that indicates the source of the reused address.
Before this fix, it was possible for the HTTP socket to unlink the RPC socket, leading to confusing blocked behavior when running commands like `consul info`.
```
% cat tmp.config.json
{
"addresses": {
"http": "unix:///tmp/.consul.sock",
"rpc": "unix:///tmp/.consul.sock"
},
"unix_sockets": {
"mode": "0700"
}
}
% consul agent -config-file tmp.config.json -advertise=127.0.0.1 -data-dir=/tmp/
==> All listening endpoints must be unique: HTTP address already configured for RPC
Exit 1
```
2016-04-01 10:20:45 -07:00
9eaffc456f
skip_leave_on_int's default changes based on agent mode
...
`skip_leave_on_int`'s behavior now changes based on whether or not the agent is acting as a client or server.
Fixes: 1687
2016-03-31 17:45:14 -07:00
08aa037dd3
Guard against a node name containing pure whitespace for real
2016-03-31 15:10:19 -07:00
faa2aa4436
Guard against a node name containing pure whitespace
2016-03-31 15:02:58 -07:00
c03d025903
Node names are not allowed to be empty
2016-03-31 14:47:55 -07:00
85c1da796d
Change tests to accept an "at least this many" answers semantic
...
The size of answers vary based on the target platform. Accomodate this variance.
2016-03-30 11:48:32 -07:00
12f1a71f00
Fix tests
...
I'm not sure how I thought this passed last night, it was obviously wrong.
2016-03-30 10:16:05 -07:00
1bcf8d9b33
Editorialize the comment re: UDPAnswerLimit
...
Prodded by: slackpad & fusiondog
2016-03-30 01:15:40 -07:00
9d7a6d895a
Use table-driven test for response limits
...
Much more exhaustive testing and shows where the limits are of the 512B limitation (quering by ID is less space efficient than querying by just a prepared query or service).
2016-03-30 01:05:49 -07:00
49f8b147b8
Remove duplicate paste-o
...
Pointed out by: slackpad
2016-03-29 23:31:31 -07:00
8f7bed30a6
Test services and PQT limits
2016-03-29 23:08:58 -07:00
6392dfe0e3
Improve the use of constants across DNS tests
2016-03-29 23:08:40 -07:00
b2e0baec4e
Use a non-default config value
2016-03-29 23:06:31 -07:00
fbf1e5c939
Test missing config inputs
...
Alpha sort where appropriate to make it easier to keep in sync in the future.
2016-03-29 23:06:17 -07:00
c3dcd9acfb
Correctly detect that an answer has been truncated
2016-03-29 19:52:31 -07:00
0ad4fab7d4
Remove dead and incorrect code
...
This functionality is handled further upstream in `trimUDPAnswers()`
2016-03-29 19:38:26 -07:00
d1166307aa
Trim UDP responses per configuration
2016-03-29 19:27:21 -07:00
a29f6e8c8f
Allow adjusting the number of DNS records in a response...
...
Based on work done by @fusiondog in #1583 , extend the concept to use an integer instead of a boolean.
Fixes : #1583 && #1481
2016-03-29 19:23:56 -07:00
e533f9bce1
Adding singleton option to DNS for getaddrinfo bug.
2016-03-29 19:23:07 -07:00
74c8da079e
Fix whitespace alignment in a comment
2016-03-23 16:00:39 -07:00
2c61c1d333
Merge pull request #1861 from hashicorp/b-flaky-test
...
Widens coordinate update sleeps in unit tests.
2016-03-21 18:24:05 -07:00
4629871f57
Widens coordinate update sleeps in unit tests.
2016-03-21 18:23:11 -07:00
bcca7efe83
Added help text for -dev option #1804
2016-03-21 17:27:57 +05:30
13b8ce0adc
Merge pull request #1851 from hashicorp/f-ipv6-bind
...
Allow [::] as a bind address (binds to first public IPv6 address)
2016-03-19 16:16:19 -07:00
508bc796a8
Allow [::] as a bind address (binds to first public IPv6 address)
2016-03-18 23:59:44 +01:00
79d49336a8
Used 'unconvert' to remove unneeded conversions
...
I've removed unneeded conversions by performing the following commands:
$ go get -u github.com/mdempsky/unconvert
$ go list ./... | grep -v vendor | xargs unconvert -apply
Signed-off-by: Miquel Sabaté Solà <msabate@suse.com>
2016-03-18 16:12:56 +01:00
314a0913e2
command: deprecated the -dc flag in the agent CLI
...
The `-dc` flag from the agent CLI command has been deprecated in favor of
`-datacenter`. This is done this way because:
- Other CLI commands used `-datacenter`. See: event, exec and watch.
- The agent configuration file uses `datacenter`.
Signed-off-by: Miquel Sabaté Solà <msabate@suse.com>
2016-03-18 15:44:35 +01:00
dda84c0f58
Merge pull request #1819 from hashicorp/f-check-accept
...
Adds default set of accept headers for HTTP checks.
2016-03-09 21:12:25 -08:00
30dba02fa3
Adds default set of accept headers for HTTP checks.
2016-03-09 21:11:20 -08:00
b132e8f21b
Tweaks algorithm so it's safe with an empty list and adds a PQ test.
2016-03-08 23:09:09 -08:00
f4edb28ef3
Make sure UDP DNS responses aren't larger than allowed
2016-03-07 16:41:17 -08:00
cb1bf35ce9
Updates to latest compiled ui assets.
2016-03-07 13:49:08 -08:00
275c84a0cc
Renames "debug" endpoint and structures to "explain".
2016-03-07 10:45:39 -08:00
8493640b09
Adds a prepared query debug endpoint.
2016-03-07 10:45:39 -08:00
f6c1ffa943
Correct the rtt -wan error message
2016-03-04 16:27:30 -05:00
bfe6f073fe
Tweaks formatting of inline output messages.
2016-03-02 19:47:00 -08:00
d709ef537b
Retains the last output when a TTL check times out.
2016-03-02 17:58:01 -08:00
bd4f2ee6b7
Adds a new PUT-based TTL check update endpoint.
2016-03-02 17:54:01 -08:00
b20278cadc
add accept header */* for agent check
2016-02-19 10:31:00 -06:00
a29c1ee04e
Merge pull request #1703 from alistanis/fix-issue-#1661
...
fixes issue #1661 and adds supporting test
2016-02-16 20:13:36 -08:00
cbdff8296f
Fixes redirect from / to /ui when internal UI is enabled.
2016-02-12 16:11:32 -08:00
1327d9eff6
add missing test
2016-02-09 10:49:41 -05:00
a2533d5d76
fixes issue #1661 and adds supporting test
2016-02-09 10:35:39 -05:00
968bd6321c
Adds a sanity check to the local node info compare.
2016-02-07 15:07:23 -08:00
9fabd05157
Merge pull request #1698 from hashicorp/pr-1547-slackpad
...
Implements WAN address translation.
2016-02-07 14:26:04 -08:00
6797b3ee85
Adds a test to make sure we get the local address within the DC.
2016-02-07 14:16:15 -08:00
3be9f16030
Increases wait to account for random stagger.
2016-02-07 13:56:45 -08:00
a61a7403a7
Factors address translation into a single function.
2016-02-07 13:39:37 -08:00
f163522f0c
Moves tagged wan address to be managed by anti-entropy, not serf.
2016-02-07 13:12:42 -08:00
81e416e70b
Adds a test to make sure the local sync doesn't clobber tagged addresses.
2016-02-07 11:26:19 -08:00
79bd1fd4bb
Sets up config for more address tags down the road, renames struct members.
2016-02-07 10:37:34 -08:00
71cf39b5f8
Use a map for additional node addresses
2016-02-06 23:01:45 -08:00
a8fd9542dc
Add tests for consul WAN translation
2016-02-06 23:01:45 -08:00
28ce1b079f
Explicitly set advertise address in agent tests
...
Otherwise, the tests will fail when run on a machine with multiple
private addresses
2016-02-06 23:01:45 -08:00
d18dc81749
Consider WAN addresses during Node and SRV record lookup
2016-02-06 23:01:45 -08:00
0b741350b9
Implement `translate_wan_addrs` config option
...
This knob tells consul whether it should prefer the WAN address (if set)
when making service lookups in remote datacenters. This enables
reachability for remote services which are behind a NAT.
2016-02-06 23:01:45 -08:00
d123b4dece
Rectify value of `AdvertiseAddrWan` when set elsewhere
...
`AdvertiseAddrs` has been introduced as a configuration option, which
duplicates a few other options, namely `AdvertiseAddrWan`. We need to
use this value elsewhere, so rather than doing a precedence check every
time we need to access it, rectify the value of `AdvertiseAddrWan` to
match
2016-02-06 23:01:45 -08:00
1a828e3927
Store WanAddress during Service/Check sync
2016-02-06 23:01:45 -08:00
5aedfbac34
Merge pull request #1690 from alistanis/use-http-package-statuses
...
refactors http server error codes
2016-02-06 22:38:48 -08:00
a599e88507
Merge pull request #1284 from nbrownus/telemetry
...
Option to disable hostnames from telemetry
2016-02-06 22:00:14 -08:00
0b90de4d1b
Fix formatting in exec help
...
The description for `-node` was separated by tabs instead of spaces,
causing it to be incorrectly aligned.
2016-02-06 12:28:56 -06:00
7273fb0470
Merge pull request #1654 from ryanslade/invalid-check-message
...
Updated invalid check error message.
2016-02-05 17:21:29 -08:00
de4129fced
Merge branch 'master' of https://github.com/alistanis/consul into use-http-package-statuses
2016-02-05 17:30:43 -05:00
0ce79f8198
add comment codes
2016-02-05 17:06:42 -05:00
4890220929
refactors http server error codes to use the http statuses defined in the http package instead of literals
2016-02-05 16:51:31 -05:00
5ac7b893cc
Use panic instead of returning a sentinel UUID values in unit tests
2016-02-01 16:42:04 -08:00
c470553b6b
Factor out duplicate functions into a lib package
...
Consolidate code duplication and tests into a single lib package. Most of these functions were from various **/util.go functions that couldn't be imported due to cyclic imports. The consul/lib package is intended to be a terminal node in an import DAG and a place to stash various consul-only helper functions. Pulled in hashicorp/go-uuid instead of consolidating UUID access.
2016-01-29 16:57:45 -08:00
541a98c9c7
Option to disable hostnames from telemetry
2016-01-29 13:44:48 -08:00
37c7a0e006
Updated invalid check error message.
...
Added some of the newer reasons this error could have occured.
2016-01-28 11:02:00 +02:00
0fcdd37107
Fixes the static asset generator for new pkg path, updates assets.
2016-01-15 10:21:42 -08:00
dc9131a732
Use HTTPS + www. where appropriate
2016-01-13 17:44:01 -05:00
b21ef7330f
Merge pull request #1592 from hashicorp/b-reap
...
Adds support for the reap lock.
2016-01-13 09:37:54 -08:00
d22fe5ba62
Adds support for the reap lock.
2016-01-12 21:10:25 -08:00
f8a6b6db83
Add consul agent help for advertise-wan
2016-01-11 14:27:54 -05:00
6dd0835319
Makes the timeout behavior more intuitive.
...
Previously, it would try once "up to" the timeout, but in practice it would
just fall through. This modifies the behavior to block until the timeout has
been reached.
2016-01-06 09:40:20 -08:00
87dd758199
Defaults monitor retries to 3 retries @ 1s for the consul lock command.
2016-01-05 18:34:22 -08:00
9323276b58
Adds monitor retries to the consul lock command.
2016-01-05 18:22:36 -08:00
3348cf4c0b
Adds "try" support to locks and semaphores.
2016-01-05 18:22:36 -08:00
df361afed5
Merge pull request #1550 from hashicorp/f-devmode
...
Add a `-dev` mode for easy prototyping
2016-01-05 10:01:41 -08:00
e308bc3733
remove address splitting
2016-01-05 11:49:40 -05:00
6f316138d3
Move logged client IP to the end of the log message
2015-12-30 15:39:34 -05:00
8e938d4d38
Merge branch 'master' of http://github.com/hashicorp/consul into issue/1447/http-access-logs
2015-12-30 15:38:30 -05:00
f37c0facbe
agent: enable ui for dev mode
2015-12-26 20:39:42 -05:00
ce4cf8a542
consul: dev mode works
2015-12-26 20:19:36 -05:00
b04510f934
agent: update assetfs output
2015-12-24 22:21:34 -05:00
52ad989405
agent: static UI is configurable
2015-12-24 22:21:34 -05:00
86f76205aa
agent: initial web assets
2015-12-24 22:21:34 -05:00
a262115679
agent: compile web assets into consul binary
2015-12-24 22:21:34 -05:00
b8f8861d97
Merge branch 'master' of http://github.com/hashicorp/consul into issue/1447/http-access-logs
2015-12-22 14:55:18 -05:00
4dd7a5fbaa
Adds a Bool helper function.
2015-12-22 10:43:32 -08:00
d71036c4f0
Moves logger down where it's used for reaping.
2015-12-22 10:29:55 -08:00
e1d456a079
Changes sense of option to "reap" and uses nil for "not set".
2015-12-22 10:28:10 -08:00
1e4aa28c9d
Adds child process reaping when Consul is running as PID 1.
2015-12-21 21:47:35 -08:00
874d491ade
Converts the DNS metric to a gauge which gives us a count and a time.
2015-12-21 18:25:09 -08:00
9e0ac674c3
Adds telemetry on number of DNS queries served, per-agent.
2015-12-21 17:01:28 -08:00
dcecbf4653
Fix typo
2015-12-08 17:45:01 +08:00
b87aeec4e1
Removes the GOMAXPROCS warnings which are obsolete for Go 1.5+.
2015-11-25 17:59:16 -08:00
396df9a0c1
Add client ip to http access logs
...
Fixes #1447
2015-11-24 15:06:33 -05:00
23536f2b97
Adds Docker checks support to client API.
...
Also changed `DockerContainerId` to `DockerContainerID`, and updated the agent
API docs to reflect their support for Docker checks.
2015-11-18 07:40:02 -08:00
573f48ed3d
Breaks up huge HTTP endpoint functions.
2015-11-17 09:16:04 -08:00
a364a02da6
Avoids taking the length again when parsing DNS queries.
2015-11-17 08:40:47 -08:00
a1e02996e5
Moves conversion of nil slices up to HTTP layer for prepared queries.
2015-11-15 17:06:00 -08:00
267c352c6d
Adds a test to make sure a stale retry terminates.
2015-11-15 17:06:00 -08:00
e6ccf5b9ed
Returns a 404 from a get or execute of a nonexistent query.
2015-11-15 17:06:00 -08:00
c9ef552385
Plumbs the service name back and uses agent-specific TTL settings as a fallback.
2015-11-15 17:06:00 -08:00
cad6938474
Adds unit tests for prepared queries and DNS, using existing tests for equivalence.
2015-11-15 17:06:00 -08:00
f9c91479ef
Adds DNS support for prepared queries (needs tests).
2015-11-15 17:06:00 -08:00
38daaea503
Adds a slightly more flexible mock system so we can test DNS.
2015-11-15 17:06:00 -08:00
978fb443a7
Adds a note about obfuscating query name/ID from the logs.
2015-11-15 17:06:00 -08:00
124410b66c
Adds an HTTP endpoint for prepared queries.
2015-11-15 17:06:00 -08:00
a33e35fcce
Moves DNS over to new shuffle and filter functions.
2015-11-15 17:06:00 -08:00
763d5ea8a7
Fixes nil slices from HTTP endpoints.
...
These would manifest in the HTTP output as Javascript nulls instead of
empty lists, so we had unintentionally changed the interface while
porting to the new state store. We added code to each HTTP endpoint to
convert nil slices to empty ones so they JSON-ify properly, and we added
tests to catch this in the future.
2015-11-14 21:05:37 -08:00
a384baf671
Merge pull request #1293 from talwai/master
...
Add options to send telemetry to DogStatsD
2015-11-13 09:51:50 -08:00
01ccad69a1
Kill unused import in command.go
2015-11-13 11:14:15 -05:00
67408fe477
Fixes unit test fail due to expected truncated message.
2015-11-12 18:16:44 -08:00
e6e842d9e7
Add DogStatsd configuration
2015-11-11 14:30:36 -05:00
9107521c17
Fixes a go vet finding.
2015-10-29 12:47:20 -07:00
eb4bfa3411
Prevents agents from considering Raft information when doing sync checks.
2015-10-28 14:32:00 -07:00
c1305a08ea
Makes the version upshift code look at the correct version field.
2015-10-27 14:44:34 -07:00
3b5eefb713
Merge pull request #1343 from hashicorp/f-docker-check
...
Docker Support for Consul Health Checks
2015-10-26 21:00:48 -07:00
fb0cae7320
Forcing the Env variable to empty while testing the default shell logic
2015-10-26 20:35:13 -07:00
9070d12b2f
Added a test for selecting shell from env
2015-10-26 20:21:50 -07:00
8af6ac8f16
Making an explicit check to test whether a check is of type Monitor
2015-10-26 19:52:32 -07:00
f8a03508ad
Fixed the tests
2015-10-26 18:20:02 -07:00
15ff470a79
Added a test to check if we are properly truncating docker exec outputs
2015-10-26 18:06:55 -07:00
709b518d03
Added a test for exit code 1 with docker exec
2015-10-26 16:58:09 -07:00
c8c08586f0
Fixed the Fake Docker client to simulate Exec start failures
2015-10-26 16:54:51 -07:00
fd6d57ccac
Not adding the docker check if we couldn't create the client
2015-10-26 16:45:12 -07:00
210b968037
Making sure the script is not empty if it's a docker check
2015-10-26 16:27:48 -07:00
0a657b2602
Updated the comment for CheckType
2015-10-26 15:28:13 -07:00
2276ebc978
Collect and truncate the output from docker exec
2015-10-26 15:19:35 -07:00
0de0abcaec
Defaulting to Monitor check
2015-10-26 15:02:23 -07:00
d2bd1b0c3f
Extracted the logic of figuring out the shell and fixing the logic to find out if the check is a Docker check
2015-10-26 15:00:34 -07:00
f445318732
Added some tests for docker check
2015-10-26 12:59:40 -07:00
b50b0a8526
Merge pull request #1296 from hashicorp/f-fast-sync
...
agent: remove an N^2 check. See #1265
2015-10-26 11:37:52 -07:00
d478fa9470
Marking the state of a service as critical if the Docker Daemon doesn't respond while running checks
2015-10-26 11:16:11 -07:00
b35836fdad
Adding a debug log to indicate the exit code of failed check
2015-10-26 10:35:51 -07:00
1b1518512c
Registering the Exec with Docker Daemon everytime the check is invoked
2015-10-26 10:23:57 -07:00
c4b85010fb
Implemented Docker health checks
2015-10-26 10:23:57 -07:00
2a51d55ce3
Runs go fmt (sorts new go-cleanhttp imports).
2015-10-23 17:14:35 -07:00
b91e2d3a97
Completes rebase of network coordinates to new memdb.
2015-10-23 15:23:01 -07:00
b9732e3c39
Gives RTT class a more Go-like name.
2015-10-23 15:23:01 -07:00
c48e3e1179
Defaults second node to agent if not given. Removes -short option and tweaks output formatting.
2015-10-23 15:23:01 -07:00
a51e170eef
Cleans up after code review, adds a -short option to "consul rtt" command.
2015-10-23 15:23:01 -07:00
43df5c6784
Adds a "consul rtt" command.
2015-10-23 15:23:01 -07:00
aea2194ce3
Makes the default protocol 2 and lets 3 interoperate with 2.
2015-10-23 15:23:01 -07:00
baa223ab4a
Runs go fmt after latest rebase.
2015-10-23 15:23:01 -07:00
8e67c37398
Adds a test for the `DisableCoordinate` config.
2015-10-23 15:23:01 -07:00
3f11bfaea4
Adds coordinate of agent to self endpoint.
2015-10-23 15:23:01 -07:00
a74bdcba49
Moves sorting up into coordinate endpoint HTTP handlers.
2015-10-23 15:23:01 -07:00
0e7d5871c5
Installs a friendly handler for coordinate endpoints when coordinates are disabled.
2015-10-23 15:23:01 -07:00
def8c6087d
Fixes config merge fn for disabling coordinates and adds it to JSON.
2015-10-23 15:23:01 -07:00
a2bcef00a0
Adds endpoints for raw network coordinates.
2015-10-23 15:23:01 -07:00
fecd639b02
Changes ?near=self to a safer ?near=_agent, which is also clearer about what it does.
2015-10-23 15:23:01 -07:00
ee1cf1e13b
Adds distance sorting to health endpoint. Cleans up unit tests.
2015-10-23 15:23:01 -07:00
1724b9a6be
Adds a magic "self" node name to distance queries.
2015-10-23 15:23:01 -07:00
59b710894d
Adds tests for HTTP interface. Removes a stray mark.
2015-10-23 15:23:01 -07:00
b63909cf67
Adds coordinate sorting support to catalog queries for nodes and service nodes.
2015-10-23 15:23:01 -07:00
d7bac0e808
Turns down the coordinate sync rate a bit more.
2015-10-23 15:23:01 -07:00
9ba9a708f6
Scales coordinate sends to hit a fixed aggregate rate across the cluster.
2015-10-23 15:23:01 -07:00
d8b8a3719f
Simplifies the batching function and adds some comments.
2015-10-23 15:23:01 -07:00
f71c79c53f
Does some small cleanups based on PR feedback.
...
* Holds coordinate updates in map and gets rid of the update channel.
* Cleans up config variables a bit.
2015-10-23 15:23:01 -07:00
1222772452
Hardens Consul from bad coordinates from other nodes.
2015-10-23 15:23:01 -07:00
acb0dce829
Moves batching down into the state store and changes it to fail-fast.
...
* A batch of updates is done all in a single transaction.
* We no longer need to get an update to kick things, there's a periodic flush.
* If incoming updates overwhelm the configured flush rate they will be dumped with an error.
2015-10-23 15:23:01 -07:00
b6c31bdf2f
Flips the sense of the coordinate enable option.
2015-10-23 15:23:01 -07:00
9c069c5031
Removes one more WAN leftover.
2015-10-23 15:23:01 -07:00
edb9a119e2
Does a clean up pass on the Consul side.
2015-10-23 15:23:01 -07:00
ac4185b888
Merges config changes after rebase.
2015-10-23 15:23:01 -07:00
139c9240ea
Address comments
2015-10-23 15:23:01 -07:00
840474f170
Add a test case
2015-10-23 15:23:01 -07:00
23c08aeeb4
Use IndexedCoordinate instead
2015-10-23 15:23:01 -07:00
530e73212a
Some fixes
2015-10-23 15:23:01 -07:00
2ef802b8b3
Fix a comment
2015-10-23 15:23:01 -07:00
b2cff43bb5
Complete logic for sending coordinates
2015-10-23 15:23:01 -07:00
66b210afcb
Some fixes
2015-10-23 15:23:01 -07:00
b5bbe2bcfa
Adding tests and stuff
2015-10-23 15:23:01 -07:00
d035dbd43b
Merge pull request #1318 from daveadams/f-http-header-token
...
Allow specifying Consul token in an HTTP request header
2015-10-22 13:33:47 -07:00
9267f956a2
Update cleanhttp repo location
2015-10-22 14:14:22 -04:00
06bb9d5f36
Use cleanhttp to get rid of DefaultTransport
2015-10-22 10:47:50 -04:00
5f175add40
Add HTTP request header X-Consul-Token
...
Add support for an X-Consul-Token HTTP request header to specify the
token with which this request should be fulfilled. The header would have
precedence over the responding Agent's default token, but would have
lower precedence than a token specified in the query string.
2015-10-19 11:26:01 -05:00
263c7e3fd3
Deletes the old state store and all its accoutrements.
2015-10-15 14:59:09 -07:00
bcdabe4606
Knocks out the Raft indexes before doing compare.
2015-10-15 14:59:09 -07:00
cbcd977a39
Gets new structs changes to compile, adds some corner case handling and extra unit tests.
2015-10-15 14:59:09 -07:00
b46f878747
Merge pull request #1309 from hashicorp/f-remove-migrate
...
Removes consul-migrate for 0.6
2015-10-15 14:50:19 -07:00
9cddc187b5
Don't use http.DefaultClient
...
Two of the changes are in tests; the one of consequence is in the API.
As explained in #1308 this can cause conflicts with downstream programs.
Fixes #1308 .
2015-10-15 17:49:35 -04:00
aba1b26015
agent: consolidates data dir checker
2015-10-15 14:21:35 -07:00
8bc51eb237
agent: test mdb dir protection
2015-10-15 14:15:41 -07:00
2a7609d6bc
agent: remove migrator, refuse to start if mdb dir found
2015-10-15 14:15:08 -07:00
0b77960349
agent: remove an N^2 check. See #1265
2015-10-12 20:30:11 -07:00
a94589ad67
Add http method to log output
2015-10-02 18:33:06 -07:00
26eadcd95c
Merge pull request #1235 from wuub/master
...
fix conflict between handleReload and antiEntropy critical sections
2015-09-17 07:28:39 -07:00
9a1b52171f
panic when unbalanced localState.Resume() is detected
2015-09-17 11:32:08 +02:00
c5168e1263
Fix a bunch of typos.
2015-09-15 13:22:08 +01:00
b25797a808
Merge pull request #1187 from sfncook/enable_tag_drift_03
...
Enable tag drift 03
2015-09-11 15:35:32 -07:00
8d733b7fca
remove various typos
2015-09-11 12:29:54 -07:00
4cd1b09ad7
make Pause()/Resume()/isPaused() behave more like a semaphore
...
see: https://github.com/hashicorp/consul/issues/1173 #1173
Reasoning: somewhere during consul development Pause()/Resume() and
PauseSync()/ResumeSync() were added to protect larger changes to
agent's localState. A few of the places that it tries to protect are:
- (a *Agent) AddService(...) # part of the method
- (c *Command) handleReload(...) # almost the whole method
- (l *localState) antiEntropy(...)# isPaused() prevents syncChanges()
The main problem is, that in the middle of handleReload(...)'s
critical section it indirectly (loadServices()) calls AddService(...).
AddService() in turn calls Pause() to protect itself against
syncChanges(). At the end of AddService() a defered call to Resume() is
made.
With the current implementation, this releases
isPaused() "lock" in the middle of handleReload() allowing antiEntropy
to kick in while configuration reload is still in progress.
Specifically almost all services and probably all check are unloaded
when syncChanges() is allowed to run.
This in turn can causes massive service/check de-/re-registration,
and since checks are by default registered in the critical state,
a majority of services on a node can be marked as failing.
It's made worse with automation, often calling `consul reload` in close
proximity on many nodes in the cluster.
This change basically turns Pause()/Resume() into P()/V() of
a garden-variety semaphore. Allowing Pause() to be called multiple times,
and releasing isPaused() only after all matching/defered Resumes() are
called as well.
TODO/NOTE: as with many semaphore implementations, it might be reasonable
to panic() if l.paused ever becomes negative.
2015-09-11 18:28:06 +02:00
24ac26b3c1
failing test showing that nested Pause()/Resume() release too early
...
see: #1173 / https://github.com/hashicorp/consul/issues/1173
2015-09-11 17:52:57 +02:00
99be758411
Rename EnableTagOverride and update formatting
2015-09-11 08:35:29 -07:00
f448a62826
Remove debug lines
2015-09-11 08:32:59 -07:00
2f04917261
Merge remote-tracking branch 'hashicorp/master' into enable_tag_drift_03
2015-09-10 14:55:30 -07:00
d00889c3a4
Adds missing token to maint unit test.
2015-09-10 14:53:00 -07:00
8a86eee9fb
Add test cases TestAgentAntiEntropy_EnableTagDrift
2015-09-10 14:08:16 -07:00
08d12e978f
Merge pull request #1230 from hashicorp/f-maintfix
...
Respect tokens in maintenance mode
2015-09-10 12:30:07 -07:00
948bd57d6a
agent: testing node/service maintenance using tokens
2015-09-10 12:08:08 -07:00
e129a59316
agent: thread tokens through for maintenance mode
2015-09-10 11:43:59 -07:00
3d7c3725d8
Allow AAAA queries for nodeLookup
2015-09-08 16:54:36 +02:00
d63749b30e
Merge pull request #1217 from 42wim/fix-rfc2308-part3
...
No NXDOMAIN when the answer is empty
2015-09-04 10:42:38 -04:00
56efa4958b
Merge pull request #1214 from zendesk/fix_lock_race_2
...
lock.go: fix another race condition
2015-09-02 16:04:55 -07:00
2336c6a4bd
No NXDOMAIN when the answer is empty
2015-09-02 16:12:22 +02:00
a013095f62
Merge pull request #1167 from railsguru/master
...
Add -http-port option to change the HTTP API port
2015-09-02 01:15:55 -04:00
655666170a
agent: Always enable the UI endpoints
2015-09-01 18:28:32 -07:00
01ec256c7e
lock.go: fix another race condition
...
The previous fix to `consul lock` (commit 6875e8d) didn't completely
eliminate the race that could occur if the lock was acquired around the
same time SIGTERM was received: It was still possible for
Run() to spawn the process via startChild() after killChild() had
released the shared mutex.
Now, when SIGTERM is received, we acquire a mutex that prevents
spawning a new process and never release it.
We've tested this fix pretty thoroughly and believe it completely
resolves the issue.
2015-09-01 14:27:23 -07:00
e97973c1e1
Limit the DNS responses after getting the NodeRecords
2015-09-01 23:23:05 +02:00
56d2fa4c17
Merge pull request #1195 from 42wim/fix-rfc2308-part2
...
Return SOA/NXDOMAIN when the answer is empty
2015-09-01 17:08:31 -04:00
b806aceef4
Return SOA/not found when the answer is empty
2015-09-01 22:28:12 +02:00
0f49e1c3a9
Merge pull request #1200 from ryotarai/lock-pass-stdin
...
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-31 21:14:45 -07:00
d6b71de3f4
agent: reload SCADA client if endpoint changes
2015-08-27 13:29:07 -07:00
5bd7a5f239
command: atlas endpoint can be passed
2015-08-27 11:11:05 -07:00
cda2bf6975
agent: atlas_endpoint is configurable
2015-08-27 11:08:01 -07:00
c45f2971e7
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-26 16:27:21 +09:00
00d78963bf
agent: log a message when making a new scada connection
2015-08-25 21:03:16 -07:00
33cadcf925
agent: don't reload scada client if there is no config change
2015-08-25 20:43:57 -07:00
8eea77d58f
agent: testing scada client creation in command
2015-08-25 20:22:22 -07:00
495cc41ba4
agent: test scada HTTP server creation
2015-08-25 18:51:04 -07:00
e3cd2f2c0d
agent: clean up scada connection manager
2015-08-25 18:27:07 -07:00
bc96c14a6f
agent: document the scada http creation func
2015-08-25 17:19:11 -07:00
1378fd93b0
agent: scada client and HTTP server are tracked separately
2015-08-25 16:59:53 -07:00
325b54649a
Remove duplicate code
2015-08-20 20:46:20 +02:00
3d133ab78c
Use Ports.HTTP directly
2015-08-20 20:27:20 +02:00
7e2ecf6a3c
Add documentation for http-port option
2015-08-20 20:19:35 +02:00
d4ec6aa630
Update tests - NodeService init needs bool
2015-08-20 09:09:26 -07:00
854ff1eb41
Add EnableTagDrift logic to command/agent/local.go
2015-08-18 14:03:48 -07:00
3a740ac07b
Remove from command/agent/config_test.go
2015-08-18 10:42:25 -07:00
f6814c89ed
EnableTagDrift in NodeService struct
2015-08-18 10:34:55 -07:00
5024e7c3c7
Merge pull request #1166 from hashicorp/f-dns-log
...
Log network address of DNS clients
2015-08-13 18:32:32 -07:00
07299a61dc
agent: log network address of DNS clients
2015-08-11 10:33:27 -07:00
7a3da7db26
Add -http-port option to change the HTTP API port
...
This is useful when pushing consul to PaaS like
Cloud Foundry making the HTTP API easily routable.
2015-08-11 14:14:21 +02:00
c2a865686c
Merge pull request #1158 from mfischer-zd/fix_1155
...
lock.go: fix race condition
2015-08-05 14:56:13 -07:00
9e0e9e389d
lock.go: fix race condition
...
Fix a race condition between startChild() and killChild() that could
lead to an orphaned managed process.
Fixes #1155
2015-08-05 09:06:51 -07:00
f95ba4b8eb
Remove trailing slash from lock
...
Lock command will remove trailing slash from path (as it is invalid).
Fixes #1136 .
2015-07-30 12:14:17 -05:00
b13ba78651
Merge pull request #1143 from hashicorp/GH-1142
...
Check NXDOMAIN after filtering nodes
2015-07-29 18:56:08 -04:00
20f17a0cc8
Test for GH-1142.
2015-07-29 18:21:16 -04:00
0a853bca2e
Merge pull request #1137 from 42wim/fix-1124
...
Recurse when PTR answer is empty
2015-07-29 14:39:04 -07:00
dbb5ad1316
Check NXDOMAIN after filtering nodes
...
Move the check for NXDOMAIN below the service health filter.
2015-07-29 17:16:48 -04:00
6e38497ce9
Merge pull request #1141 from hashicorp/f-travis
...
Try moving to newer Travis-CI infrastructure
2015-07-28 10:42:56 -07:00
f48bc65e62
travis-ci: skip syslog tests for container-based travis infra
2015-07-28 09:58:43 -07:00
a6734ab4b8
Recurse when PTR answer is empty
2015-07-27 23:22:36 +02:00
2017c95d13
Merge pull request #1130 from pdf/check_socket
...
Add Socket check type
2015-07-27 14:21:24 -07:00
6d38027689
Merge pull request #1090 from hashicorp/f-keyring-acl
...
Keyring ACLs
2015-07-24 10:23:18 -07:00
86edd7169c
Add TCP check type
...
Adds the ability to simply check whether a TCP socket accepts
connections to determine if it is healthy. This is a light-weight -
though less comprehensive than scripting - method of checking network
service health.
The check parameter `tcp` should be set to the `address:port`
combination for the service to be tested. Supports both IPv6 and IPv4,
in the case of a hostname that resolves to both, connections will be
attempted via both protocol versions, with the first successful
connection returning a successful check result.
Example check:
```json
{
"check": {
"id": "ssh",
"name": "SSH (TCP)",
"tcp": "example.com:22",
"interval": "10s"
}
}
```
2015-07-24 14:06:05 +10:00
a339ca19a6
agent: disable ACLs for RPC client tests
2015-07-23 17:09:33 -07:00
6f42f6640c
command/lock: Check for shutdown during lock acquisition. Fixes #800
2015-07-22 16:07:44 -07:00
eece6e4848
Return every time lock acquisition fails
2015-07-22 10:44:47 -07:00
f424f94d45
agent: vet fixes
2015-07-14 11:42:51 -07:00
8e834ba976
Merge pull request #995 from 42wim/rfc2308-soa-ttl
...
Send SOA with negative responses (RFC2308)
2015-07-13 08:49:25 -07:00
0a09b11cba
agent: testing keyring ACLs
2015-07-07 15:14:06 -06:00
e764eb62bd
agent: write-level keyring ACLs work
2015-07-07 10:36:51 -06:00
665551a182
agent: read-level keyring ACLs work
2015-07-07 10:30:34 -06:00
503fa1eed1
Merge pull request #1046 from hashicorp/f-event-acl
...
Event ACLs
2015-07-02 07:02:07 -07:00
715f69cce8
Merge pull request #1004 from i0rek/advertise_addrs
...
Add advertise_addrs.
2015-06-23 12:32:07 -07:00
4598087df3
Implement advertise_addrs for SerfLan, SerfWan and RPC.
...
Fixes #550 .
This will make it possible to configure the advertised adresses for
SerfLan, SerfWan and RPC. It will enable multiple consul clients on a
single host which is very useful in a container environment.
This option might override advertise_addr and advertise_addr_wan
depending on the configuration.
It will be configureable with advertise_addrs. Example:
{
"advertise_addrs": {
"serf_lan": "10.0.120.91:4424",
"serf_wan": "201.20.10.61:4423",
"rpc": "10.20.10.61:4424"
}
}
2015-06-23 21:23:45 +02:00
5866588d68
command: remote exec takes -token parameter
2015-06-22 17:16:28 -07:00
1f68b5268b
command: event command supports -token arg
2015-06-22 16:59:41 -07:00
5c9cf8cc69
agent: avoid masking errors when ACLs deny a request
2015-06-18 18:13:29 -07:00
4a95f29e03
agent: testing user event endpoint ACLs
2015-06-18 18:13:29 -07:00
e6923a4832
consul: always fire events from server nodes
2015-06-18 18:13:29 -07:00
713f1781c8
agent: enforce event policy during event fire
2015-06-18 18:13:29 -07:00
e70e57a0dc
Send SOA with negative responses
2015-06-14 00:03:44 +02:00
b7674a2d35
Merge pull request #1028 from sebastianmarkow/master
...
Remove unreachable error handling in AgentRPC.listen()
2015-06-12 22:28:10 -07:00
b2556bd4d0
agent: testing dns when acls are in use
2015-06-12 16:01:57 -07:00
48cb636e8d
agent: dns uses the configured token during queries
2015-06-12 16:01:57 -07:00
34611c8599
consul: Remove unreachable error handling
2015-06-12 20:21:32 +02:00
47073c87c1
agent: don't replace empty tokens in the logs, fixes #1020
2015-06-12 00:11:37 -07:00
b5fff74c8a
agent: fix failing test
2015-06-11 15:13:10 -07:00
e4f937f71d
agent: use persist/load/purge convention for function names
2015-06-08 09:35:10 -07:00
08a12ffd5b
agent: test check state restoration from AddCheck
2015-06-05 17:33:34 -07:00
bd448d27fe
agent: check state is purged if expired
2015-06-05 16:59:41 -07:00
7d8993e0f0
agent: purge check state when checks are deregistered
2015-06-05 16:57:14 -07:00
8c9facbff0
agent: testing state persistence, recovery, and expiration
2015-06-05 16:45:05 -07:00
f1eb739949
agent: first stab at persisting check state
2015-06-05 16:17:07 -07:00
7e82b3c32c
agent: refactor loadChecks/loadServices, fixes a few minor bugs
2015-06-04 14:33:30 -07:00
359abdb9a8
agent: don't replace config on SIGHUP if parsing fails
2015-05-30 22:50:24 -07:00
c746d218f4
command/agent: skip unix file permissions test on windows
2015-05-29 21:12:45 +02:00
263fae2292
Sort members in by name for consul members
2015-05-22 10:37:54 +02:00
bec5ce6af9
Sort tags in consul members -detailed output
2015-05-22 10:27:47 +02:00
b5cd115795
agent: flush progress info to console during migrations
2015-05-19 18:47:44 -07:00
74dd2270af
Set the User Agent for HTTP health checks
2015-05-18 19:12:10 +02:00
450f66fd3c
Include DC in the members command output
2015-05-15 23:26:34 +02:00
704f6343c3
agent: log a message when data migrations start
2015-05-12 12:58:44 -07:00
3ce3c663ad
Fix tests after merge
2015-05-11 18:53:09 -07:00
430100a0c8
Merge pull request #927 from hashicorp/f-tls
...
Add new `verify_server_hostname` to mitigate possibility of MITM
2015-05-11 18:15:16 -07:00
f797130228
Fixing merge conflict
2015-05-11 16:48:10 -07:00
1952083354
agent: copy config into consul config
2015-05-11 15:16:13 -07:00
c8fb9ab369
agent: Adding new VerifyHostname config
2015-05-11 15:13:58 -07:00
0b9bc7d2f5
Adding documentation about specifying multiple configuration directories
2015-05-11 10:19:04 -07:00
d4f805e800
command: fix configtest help format
2015-05-11 09:42:26 -07:00
27a4dc868c
Merge pull request #904 from josephholsten/configtest-clean
...
add minimal configtest command
2015-05-11 09:01:54 -07:00
ae3e8d24c4
command/configtest: add
2015-05-08 13:09:50 -07:00
d0a28482ff
agent: use service ID field to determine associated health checks during deregister
2015-05-07 15:30:01 -07:00
e7b00723f4
agent: restore check status when re-registering (updating) services
2015-05-06 12:28:42 -07:00
e474e34528
Merge pull request #909 from hashicorp/f-create
...
Support ACL upsert behavior
2015-05-06 11:22:11 -07:00
ed067fd03c
agent: allow persisted services to be updated on disk
2015-05-05 22:36:45 -07:00
9acc42b86e
Merge pull request #891 from hashicorp/f-token
...
ACL tokens for service/check registration
2015-05-05 22:17:31 -07:00
b0fb010c2d
agent: Support ACL upserting
2015-05-05 19:25:10 -07:00
c457b6cb75
agent: Adding test for DNS enable_truncate
2015-05-05 14:14:41 -07:00
0e9718247d
command/agent: Lowercase DC. Fixes #761
2015-05-05 13:56:37 -07:00
3c577a0069
agent: use an additional parameter for passing tokens
2015-05-04 17:48:05 -07:00
efaed93b91
Merge pull request #816 from pepov/master
...
Support different advertise address for WAN gossip
2015-05-04 15:40:25 -07:00
bcaca06650
Merge pull request #902 from hashicorp/f-stats-prefix
...
Allow configuring the stats prefix
2015-05-04 15:19:47 -07:00
9498aa9a78
Merge pull request #862 from hashicorp/f-recurse-cname
...
Return all CNAME's during service DNS resolution
2015-05-04 15:19:13 -07:00
94f0834d8f
agent: allow configuring the stats prefix
2015-05-03 16:46:20 -07:00
2496a70452
agent: more tests
2015-04-28 13:06:02 -07:00
67e9a04f48
agent: restore tokens for services and checks in config
2015-04-28 12:44:46 -07:00
802b4793df
agent: backwards compat for persisted services from pre-0.5.1
2015-04-28 12:18:41 -07:00
f069db21e3
agent: safer read methods for tokens
2015-04-28 11:53:53 -07:00
54b5f17629
agent: test coverage loading service/check tokens from persisted files
2015-04-27 22:46:01 -07:00
23eab5ebcc
agent: fix deadlock reading tokens from state
2015-04-27 22:26:03 -07:00
75d182296f
agent: add service/check token methods to reduce invasiveness
2015-04-27 22:01:01 -07:00
30f6f1142e
agent: persist tokens from API registrations
2015-04-27 19:01:02 -07:00
545f3db3fe
agent: initial pass threading through tokens for services/checks
2015-04-27 18:33:46 -07:00
68cb8fda58
remove config
2015-04-24 09:51:40 -05:00
88bfdd45ef
use existing randomStagger
2015-04-23 17:08:17 -05:00
1ebc1cf916
add CheckUpdateStagger to MergeConfig
2015-04-23 16:56:20 -05:00
1e13acba68
adding check_update_stagger
2015-04-23 16:27:42 -05:00
cd65aaa2e0
agent: re-work DNS tests to not rely on the external network
2015-04-14 12:52:26 -07:00
ed4de526f1
agent: pass through CNAME types for service resolution
2015-04-14 12:52:26 -07:00
05194033f8
agent: Add test for CNAME recursion
2015-04-14 12:52:26 -07:00
34fc9a37fd
agent: parse raw query URL to avoid closing the request body early
2015-04-13 17:31:53 -07:00
adbc5c92c6
agent: hide tokens from logs and monitor
2015-04-12 11:17:31 -07:00
370853d7ff
Allow specifying a status field in the agent/service/register and agent/check/register endpoints.
...
This status must be one of the valid check statuses: 'passing', 'warning', 'critical', 'unknown'.
If the status field is not present or the empty string, the default of 'critical' is used.
2015-04-12 02:00:31 +00:00
1fad389f23
agent: Don't attempt migration on new server
2015-04-10 19:41:09 -07:00
8ebee678cc
Merge pull request #857 from hashicorp/f-boltdb
...
Raft uses BoltDB
2015-04-10 18:30:07 -07:00
8af963348c
agent: handle nil node services in anti-entropy
2015-04-10 11:15:31 -07:00
4f4f5fa7d5
command: automatically migrate raft data on start
2015-04-09 23:00:20 -07:00
c3820b4c28
agent: fix anti-entropy check sync
2015-04-09 10:40:05 -07:00
a49fe8931a
agent: test anti-entropy sync
2015-04-08 12:36:53 -07:00
80a6d7caca
agent: anti-entropy sync services/checks if they don't exist in the catalog
2015-04-08 12:21:01 -07:00
4d950f91cb
agent: fix dns test
2015-04-01 10:58:05 -07:00
755522fa48
Remove unnecessary DNS test entry
...
By using the startup callbacks, the DNS test entry is not needed to check that
the server is alive.
2015-03-31 16:50:44 -07:00
f5d27daf63
Use DNS server startup callbacks
...
Simplify waiting for the DNS server to start with the newer "NotifyStartedFunc"
callback.
2015-03-31 16:48:48 -07:00
8da6d4f065
add and test -advertise-wan cli flag
2015-03-28 16:08:19 +01:00
0a04003e16
add AdvertiseAddrWan to TestMergeConfig and use different values for Addr values in b than in a
2015-03-28 16:08:19 +01:00
e66301ab99
Add configuration option to specify a separate address for advertising on the wan
2015-03-28 16:08:19 +01:00
c00c4ebaaa
Support SesionTTLMin configuration
...
- Allow setting SessionTTLMin
- Validate on the Server
2015-03-27 05:13:57 -07:00
78cde71a22
Add -domain command line flag to agent
...
This makes it possible to configure the domain on the command line
additionally to the config file.
2015-03-20 16:05:41 +01:00
589a4cc4c7
agent: disable HTTP keepalives for checks
2015-03-15 13:30:50 -07:00
66d89ab4df
agent: warn and purge checks which cannot be restored from agent state
2015-03-11 16:13:31 -07:00
9441b46116
Merge pull request #723 from hashicorp/f-agent-block
...
Block until service/check sync is attempted from /v1/agent API's
2015-02-23 10:56:41 -08:00
f7d1397bba
command: clarify -recursor agent arg
2015-02-23 09:33:45 -08:00
fec46d0559
Support multiple recursor flag
2015-02-21 10:15:52 +03:30
4f4b4b0f3e
agent: write API's on /v1/agent block for anti-entropy
2015-02-20 19:43:33 -08:00
92794ded6e
agent: fix test compilation
2015-02-20 18:17:12 -08:00
a9f23a9154
agent: Better warning for keyring with -encrypt option. Fixes #718 .
2015-02-19 18:51:42 -08:00
53afd77e2d
s/data center/datacenter/g
2015-02-19 17:45:47 -05:00
d6e76e5dd4
agent: Cleanup a comment
2015-02-18 16:54:44 -08:00
aadec620ff
agent: Fixing blocking queries on internal endpoints
2015-02-18 15:15:02 -08:00
a446fbd098
agent: Enable UI endpoints for SCADA
2015-02-18 15:15:02 -08:00
760bbd14a5
agent: Do not expose AtlasToken or AtlasACLToken
2015-02-18 15:15:02 -08:00
1738a6b171
agent: Updating for new client API
2015-02-18 15:15:02 -08:00
0c2951c5f9
agent: Test ACL token resolution
2015-02-18 15:12:15 -08:00
8fb86d14ab
agent: Adding SCADA tests
2015-02-18 15:12:15 -08:00
6ee6f67695
agent: Use AtlasACLToken
2015-02-18 15:12:15 -08:00
7ddf87eb54
agent: Rename AtlasCluster to AtlasInfrastructure
2015-02-18 15:12:15 -08:00
269153705b
agent: Fixing setup of SCADA HTTP listener
2015-02-18 15:12:15 -08:00
d9f95e2983
agent: Fixing panic on shutdown
2015-02-18 15:12:15 -08:00
75849d643e
agent: Provide auto-join metadata to SCADA
2015-02-18 15:12:14 -08:00
524bfccc5a
agent: Adding atlas_join configuration
2015-02-18 15:12:14 -08:00
b714144685
agent: SCADA HTTP integration
2015-02-18 15:12:14 -08:00
948f9a0d00
agent: SCADA HTTP listener
2015-02-18 15:12:14 -08:00
08895ce325
agent: Starting SCADA integration
2015-02-18 15:12:14 -08:00
49d11e37f7
agent: Adding Atlas CLI flags
2015-02-18 15:12:14 -08:00
5713006297
agent: Adding new Atlas configs
2015-02-18 15:12:14 -08:00
60f69224ea
agent: Snapshot and restore health state on reload. Fixes #693
2015-02-17 12:00:04 -08:00
ec5ed93c5b
command/exec: Handle a missing key during cancelation. Fixes #626
2015-02-16 14:32:50 -08:00
ed2837d7d5
oops. DefaultTransport being used.
2015-02-12 10:11:22 -06:00
4cbf3a037a
close idle connections after stopping http checks to service
2015-02-11 18:29:51 -06:00
60dd1a073e
agent: clarify the valid characters for dns
2015-02-09 09:59:27 -08:00
5da078f989
agent: warn on service tags with invalid chars
2015-02-09 09:30:06 -08:00
fe80d28664
agent: Warn on dns-incompatible characters during service registration. Fixes #683 .
2015-02-09 09:23:17 -08:00
865e97c340
fixing version numbers RCs should be labeled x.x.x-rcx
...
see conversation with ryanuber: https://github.com/hashicorp/go-checkpoint/issues/2#issuecomment-73199209
2015-02-09 08:17:30 +01:00
d1854d1d91
agent: fix test case examples
2015-02-05 23:29:04 -08:00
e6858f158a
Merge pull request #654 from arnaudbriche/http-check-timeout
...
Configurable CheckHTTP timeout
2015-02-05 23:03:39 -08:00
49a9836be3
- add tests for CheckHTTP with new timeout parameter && CheckType.Timeout parsing
2015-02-02 15:30:44 +07:00
de96094cb0
- add proper parsing of CheckType.Timeout from string
2015-02-02 15:29:42 +07:00
029a6025aa
agent: http checks work inside of service definitions
2015-01-29 12:11:42 -08:00
6ecca376e4
agent: pass locally configured token during remote exec
2015-01-29 10:42:46 -08:00
4d105487a8
- add Timeout field to CheckType and CheckHTTP to make http request timeout configurable by the client
2015-01-29 13:37:48 +07:00
9efda655a1
agent: test service/check deletion with empty ID
2015-01-27 21:47:59 -08:00
6d27dc3548
Merge pull request #644 from foostan/add_validation_of_deregistration
...
Validate ServiceID/CheckID when deregistering.
2015-01-27 21:39:35 -08:00
a75b727391
Validation ServiceID/CheckID when deleting in deleteService() in local.go
2015-01-27 18:11:57 +09:00
99659e9014
Add tests to remove service/check without an ID
2015-01-27 18:10:56 +09:00
524cb0d0c3
Validate ServiceID/CheckID when deregistering.
2015-01-27 01:06:57 +09:00
2a80aacb86
docs: describe child process handling on Windows for lock command
...
Add website documentation for how the lock command handles child
process termination on Windows.
2015-01-25 11:42:29 +01:00
c8224b3f94
command: fix Windows build
...
Add a per GOOS implementation to send signals to PIDs
since syscall.Kill does not exist on Windows.
It will always send a SIGKILL on Windows since there
seems to be no POSIX compatible notion.
Fixes build on Windows.
2015-01-25 05:00:52 +01:00
dd0c9dfbbc
agent/http: fix service registration with nil checks value
2015-01-23 18:50:51 -08:00
068c4137cb
agent/http: clean up socket setup
2015-01-23 17:57:04 -08:00
adb3bd4c5e
agent: make check tests more reliable
2015-01-23 16:07:20 -08:00
26c9d96ccb
agent: error from KVS endpoint if incompatible flags are passed. Fixes #432
2015-01-23 12:48:39 -08:00
15de24c844
agent: more lenient dns response test
2015-01-22 15:31:12 -08:00
e5e519df4b
Merge pull request #625 from hashicorp/f-maintcmd
...
New "maint" command
2015-01-22 11:56:49 -08:00
ae672b32f6
command/maint: better arg conflict checking
2015-01-22 11:20:32 -08:00
17d2443f91
command/maint: clean up
2015-01-22 11:14:28 -08:00
fa19d09390
command/maint: display active maintenance when no args are passed
2015-01-22 10:26:17 -08:00
14d55cb40a
Merge pull request #622 from hashicorp/f-sockets
...
Unix domain sockets
2015-01-21 16:30:03 -08:00
8c1c230ce3
agent: use const for default maintenance reason strings
2015-01-21 14:53:52 -08:00
5cd8800b60
agent: fix test
2015-01-21 14:12:18 -08:00
a51ab988a3
command: more maint command tests
2015-01-21 13:49:10 -08:00
a96cfc9cc3
command: test maint command
2015-01-21 13:37:32 -08:00
718cd94b50
agent: prevent duplicate error messages for maintenance api
2015-01-21 13:28:26 -08:00
8081403ad9
command: maint command works
2015-01-21 13:11:23 -08:00
515ef304e0
command: starting maint command
2015-01-21 13:00:14 -08:00
d65f4035b9
agent: support passing ?reason= for custom notes field values on maintenance checks
2015-01-21 12:21:57 -08:00
40cfd527cb
agent: fix maintenance check ID
2015-01-21 11:03:42 -08:00
b71ffb1fa3
agent: change node maintenance endpoint
2015-01-21 10:57:44 -08:00
a498433078
agent: use strconv.ParseBool for parsing maintenance enable flag
2015-01-21 09:53:31 -08:00
ced676ffc2
agent: comments for new anti-entropy functionality
2015-01-20 21:48:46 -08:00
72e750fb00
agent: simplify anti-entropy of services with multiple checks, add tests
2015-01-20 21:48:46 -08:00
001d2e246d
agent: only send service with check sync if it is out of sync
2015-01-20 21:48:46 -08:00
3b2e9d1b90
agent: refactor syncChecks
2015-01-20 21:48:46 -08:00
684474af1d
agent: support adding multiple checks during service registration from the API
2015-01-20 21:48:45 -08:00
27de0adf3b
agent: support multiple checks per service
2015-01-20 21:48:42 -08:00
9fe1b68f26
agent: use squash mapstructure tag to properly decode embedded structs
2015-01-20 21:10:58 -08:00
c669a17fa6
agent: use interface for file permissions
2015-01-20 18:53:18 -08:00
1e0cd2e499
agent: test permissions are set on rpc socket
2015-01-20 16:57:00 -08:00
88af31507f
agent: fix tests
2015-01-20 16:50:21 -08:00
aa58218dfd
agent: re-add support for user name in socket perms
2015-01-20 16:21:23 -08:00
77c6b86b1e
agent: test Unix domain socket permission settings
2015-01-20 14:32:15 -08:00
73a111b35d
agent: adjusting tests for new behavior of sockets
2015-01-20 14:13:36 -08:00
c01277725a
agent: beginning socket user/group/mode support as discussed in #612
2015-01-20 13:44:27 -08:00
a9819e71a8
Fixing merge conflict
2015-01-20 13:01:13 -08:00
2502398481
command/lock: Fixing mixed spaces and tabs
2015-01-20 12:58:29 -08:00
c6dbb7e76c
command/lock: Adding simple test
2015-01-19 15:47:17 -10:00
b52c14d1b2
command/lock: Calculate name, use provided token
2015-01-19 15:38:00 -10:00
cdfaaac3ac
command/lock: Ensure a conflict between lock and semaphore with shared prefix
2015-01-19 15:26:17 -10:00
1aa8b0fc23
command/lock: First pass at lock
2015-01-19 14:37:48 -10:00
9ee9c5acd5
agent: test agent rpc unix socket create failure
2015-01-19 09:56:59 -08:00
73ad8fcb84
command: address vet report in test
...
Fixes the following vet report:
command/rpc_test.go:61: missing argument for Fatalf(%s): format reads arg 3, have only 2 args
2015-01-17 07:57:11 +01:00
059866cce6
command: fix up env var/cli arg precedence and tests
2015-01-16 17:45:13 -08:00
49127722ec
Merge pull request #610 from dave-tucker/bug/609
...
Don't forget to Shutdown the DNS Server!
2015-01-16 16:46:37 -08:00
f026b8781e
Don't forget to Shutdown the DNS Server!
...
Fixes #609
Signed-off-by: Dave Tucker <dave@dtucker.co.uk>
2015-01-17 00:30:53 +00:00
f29ea9f637
agent: maintenance logging + unique service check IDs
2015-01-16 15:38:13 -08:00
6d284052fc
agent: test node maintenance mode
2015-01-16 15:38:13 -08:00
8ea9eb87ea
agent: node maintenance mode works
2015-01-16 15:38:13 -08:00
3b815cd0aa
agent: maintenance mode api's are idempotent
2015-01-16 15:37:52 -08:00
8a4a8eb023
agent: maintenance mode is persistent
2015-01-16 15:37:52 -08:00
9ceb0f19d8
agent: test http endpoints for maintenance mode
2015-01-16 15:37:51 -08:00
7d4801db29
agent: test agent service maintenance mode
2015-01-16 15:37:51 -08:00
4f4eb204f6
agent: first pass at service maintenance mode
2015-01-16 15:37:51 -08:00
952fac6552
command: fix env var reader for HTTP addr
2015-01-16 14:01:20 -08:00
263614d596
agent: error if binding to existing socket file
2015-01-16 12:39:15 -08:00
328204f535
agent: test socket file overwrite
2015-01-16 10:37:13 -08:00
208b6c0677
command: style fixes for env addr reading
2015-01-16 10:19:04 -08:00
705801ccca
agent: fixing up tests
2015-01-16 09:58:37 -08:00
61d2f71d14
agent: only ignore errors on IsNotExist()
2015-01-16 09:14:52 -08:00
ad19c0afc2
agent: beginning refactor
2015-01-16 00:45:03 -08:00
9bd66c70e5
Ensure a socket is created for permissions adjustment tests and fix some
...
items pointed out in the code review
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-15 14:33:44 +00:00
c3707d3ee5
Add a Unix socket RPC test. I modified some code in the testing library to not make assumptions about the listening socket; all RPC tests still pass. Still to do: Unix socket HTTP test.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
f88536f192
Remove unnecessary ClientListenerAddr function. Rework config test functions to be cleaner. Start of runtime tests.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
4838beec4e
Tests for populateUnixSocket. Still need to write tests for the other major function, and basic socket listening tests.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
400eadd671
RPC and HTTP interfaces fully generically-sockified so Unix is supported.
...
Client works for RPC; will honor CONSUL_RPC_ADDR. HTTP works via consul/api;
honors CONSUL_HTTP_ADDR.
The format of a Unix socket in configuration data is:
"unix://[/path/to/socket];[username or uid];[gid];[mode]"
Obviously, the user must have appropriate permissions to create the socket
file in the given path and assign the requested uid/gid. Also note that Go does
not support gid lookups from group name, so gid must be numeric. See
https://codereview.appspot.com/101310044
When connecting from the client, the format is just the first part of the
above line:
"unix://[/path/to/socket]"
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
f3baa0a113
command/agent: Minor cleanups
2015-01-13 12:18:18 -08:00
d80588f780
Merge pull request #592 from nicholascapo/check-http
...
command/agent: Add simple HTTP check type
2015-01-13 12:11:50 -08:00
1bfe8efbac
Merge pull request #595 from ebroder/dns-only-passing
...
Add "only_passing" option to DNS config
2015-01-13 12:07:22 -08:00
a9ce71e304
Add more thorough testing for only_passing behavior
2015-01-13 14:59:24 +01:00
b631c74ac2
command/agent: Add tests for HTTP Check
2015-01-13 00:09:42 +00:00
793a7b74aa
agent: make dns randomization test more reliable
2015-01-12 16:05:41 -08:00
e116c03f86
command/agent: HTTP Check: Create httpClient in Start()
...
For long (>10s) interval checks the http timeout is 10s, otherwise thetimeout is the interval. This means that a check *should* return
before the next check begins.
2015-01-13 00:01:15 +00:00
27fe823fd2
command/agent: HTTP Check: Include response in check status
2015-01-12 22:35:28 +00:00
f26a79c325
command/agent: Stop HTTP checks when the check is removed
2015-01-12 22:34:39 +00:00
1918f39020
command/agent: HTTP check: Any 2xx is OK, 429 is WARNING
2015-01-12 21:58:57 +00:00
b5e1de165b
Add "only_passing" option to DNS config
...
This excludes nodes from DNS results if their healthchecks are in any
non-passing state, not just if they're critical.
2015-01-10 13:17:11 +01:00
44efa3cca4
agent: fix local_test.go
2015-01-09 16:44:12 -08:00
12cd27e588
agent: wrap deferred anti-entropy sync test in WaitForResult
2015-01-09 16:42:44 -08:00
f2649edcfc
command/agent: Add simple HTTP check type
...
These checks make an `HTTP GET` request every Interval to the specified URL.
The status of the service depends on the HTTP Response Code.
`200` is passing, `503` is warning and anything else is failing.
2015-01-09 16:43:24 -06:00
0b9f4d7153
agent: Testing the KV DELETE with cas
2015-01-08 17:31:32 -08:00
7ec294597e
agent: Support the ?cas parameter to KV DELETE
2015-01-08 17:08:58 -08:00
04d89d8ce2
agent: Testing anti-entropy with service address
2015-01-08 12:02:04 -08:00
3689b82cf4
agent: Adding test for DNS lookup with service address
2015-01-08 11:58:32 -08:00
0164de5f44
agent: Fix de-duplication of SRV with service address
2015-01-08 10:47:41 -08:00
957fa1f5ec
consul: Fixing merge conflict
2015-01-08 10:42:19 -08:00
7d9697dcf3
agent: Testing reverse lookup with custom TLD
2015-01-08 10:24:49 -08:00
3c43e0440f
replaced consul domain with configured domain. Fixes #582
2015-01-08 10:16:05 +00:00
86bcef81b5
agent: test service and check unloading
2015-01-07 22:32:14 -08:00
770bb60af8
agent: consolidate service loading code, better logging
2015-01-07 22:01:43 -08:00
33bd157a61
agent: separate service and check loading/unloading concerns
2015-01-07 22:01:20 -08:00
dea0070a39
agent: persist service/check data using hashed service/check IDs ( fixes #573 )
2015-01-07 19:11:21 -08:00
7ecd015fc0
command: check LastIndex is not zero while waiting for leader
2015-01-07 15:18:00 -08:00
b429c22bfb
command/exec: Use TTL for local and foreign
2015-01-07 14:27:29 -08:00
615b0d6b97
command/exec: Support foreign datacenters
2015-01-07 14:22:40 -08:00
babce89299
Merge pull request #581 from hashicorp/f-consulapi
...
Bring in consulapi
2015-01-07 12:09:44 -08:00
5172b21ee8
api: initial import from armon/consul-api
2015-01-06 10:40:00 -08:00
26d6ae0386
Merge pull request #576 from hashicorp/f-verify-config
...
agent: reject config with invalid options
2015-01-05 14:51:28 -08:00
1889841acd
use the service specific address in SRV response
2015-01-05 22:48:30 +00:00
d9136d3411
agent: use mapstructure's Metadata.Unused to detect extraneous config
2015-01-05 14:41:19 -08:00
25fb18b1cf
agent: reject config with invalid options
2015-01-05 12:30:03 -08:00
1088a5c170
Merge pull request #558 from ceh/http-api-response-headers
...
add ability to specify response headers on the HTTP API
2015-01-05 11:36:08 -08:00
e56b3861dc
advertise specific address for a service
...
Enable setting a specific address in a service definition for advertise. If no specific address is given it will fallback to the node address and reassemble the old behaviour.
2015-01-02 21:10:05 +00:00
59d4f20e62
Test both ?pretty both bare and with value.
2015-01-02 09:15:41 +01:00
8beb1bb848
handle ?pretty similarly to ?stale, ?consistent etc.
2015-01-02 08:00:08 +01:00
92e9e138b9
agent: test pretty printed json
2015-01-01 14:27:10 -08:00
db23a3f0e9
add ability to specify response headers on the HTTP API
...
Add an config object that allows adding HTTP header response fields to every
HTTP API response.
Each specified header is added to every response from all HTTP API endpoints.
Each individual endpoint may overwrite the specified header, which makes sure
that Consul headers such as 'X-Consul-Index' is enforced by the API.
2014-12-28 19:17:08 +01:00
b97a35234d
Clean up log line and reduce test time.
2014-12-18 09:00:51 -05:00
d415219cd5
Test that staggered checks run within the defined interval.
2014-12-17 22:39:11 -05:00
3b77bb7682
Well, that sure is cleaner.
2014-12-17 22:24:41 -05:00
3cb88d0a4f
Add a randomized start before running CheckMonitors.
2014-12-17 21:44:12 -05:00
3823a931c6
Add default rpc address configuration option as CONSUL_RPC_ADDR env variable
...
Similar as in serf: https://github.com/hashicorp/serf/pull/210
2014-12-16 12:18:34 +01:00
9b897d1134
consul: Ignore zero ttl on session
2014-12-12 19:17:04 -08:00
8dbfe7c9a8
Merge pull request #524 from amalaviy/session_ttl
...
Consul Session TTLs
2014-12-12 14:42:25 -08:00
5a76929ba4
Fixed clearSessionTimer, created invalidateSession, added invalid TTL test
2014-12-11 05:34:31 -05:00
7ece29c3e0
Took out usage of snapshot SessionListTTL
2014-12-10 21:37:06 -05:00
e84b26fcf5
Remove hardcoded wait time in session TTL tests
2014-12-10 21:04:09 -05:00
8369b77204
Clean up code based on feedback from armon
2014-12-10 20:49:06 -05:00
c992c18ef0
Added more tests. Also added return of 404 if the session id to renew is not found
2014-12-10 10:02:23 -05:00
b623af776b
Consul Session TTLs
...
The design of the session TTLs is based on the Google Chubby approach
(http://research.google.com/archive/chubby-osdi06.pdf ). The Session
struct has an additional TTL field now. This attaches an implicit
heartbeat based failure detector. Tracking of heartbeats is done by
the current leader and not persisted via the Raft log. The implication
of this is during a leader failover, we do not retain the last
heartbeat times.
Similar to Chubby, the TTL represents a lower-bound. Consul promises
not to terminate a session before the TTL has expired, but is allowed
to extend the expiration past it. This enables us to reset the TTL on
a leader failover. The TTL is also extended when the client does a
heartbeat. Like Chubby, this means a TTL is extended on creation,
heartbeat or failover.
Additionally, because we must account for time requests are in transit
and the relative rates of clocks on the clients and servers, Consul
will take the conservative approach of internally multiplying the TTL
by 2x. This helps to compensate for network latency and clock skew
without violating the contract.
Reference: https://docs.google.com/document/d/1Y5-pahLkUaA7Kz4SBU_mehKiyt9yaaUGcBTMZR7lToY/edit?usp=sharing
2014-12-07 12:38:22 -05:00
154c4e93e4
since dns.TXT is an external dependency, it is safer to add keys to the fields to avoid some potential ordering issues if changes in this field occur with upstream
2014-12-06 13:13:35 +01:00
0117529781
remove control flow on errExit by switching from bool to int
2014-12-06 12:50:38 +01:00
7c1aad7b1d
agent: agent test fixes
2014-12-05 10:36:44 -08:00
850d5bdc32
typofixes - https://github.com/vlajos/misspell_fixer
2014-12-04 23:25:06 +00:00
b10159a87b
agent: Handle service ACLs when doing anti-entropy
2014-12-01 11:43:01 -08:00
42bad4af80
agent: fixup all check definitions from json config
2014-11-30 18:27:37 -08:00
9e52588cec
agent: persist CheckType with health checks
2014-11-29 12:54:37 -08:00
4f14ba6326
agent: allow config reload to modify checks/services persistence
...
This change consolidates loading services and checks from both config
and persisted state into methods on the agent. As part of this, we
introduce optional persistence when calling RemoveCheck/RemoveService.
Fixes a bug where config reloads would kill persisted services/checks.
Also fixes an edge case:
1. A service or check is registered via the HTTP API
2. A new service or check definition with the same ID is added to config
3. Config is reloaded
The desired behavior (which this implements) is:
1. All services and checks deregistered in memory
2. All services and checks in config are registered first
3. All persisted checks are restored using the same logic as the agent
start sequence, which prioritizes config over persisted, and removes
any persistence files if new config counterparts are present.
2014-11-26 12:46:42 -08:00
ecac719bb8
fix Sprintf formatting
2014-11-25 20:06:33 +01:00
73504a01e9
cleanup unreachable code
2014-11-25 19:54:30 +01:00
fe119a1bd2
agent: prefer config over persisted services/checks ( #497 )
2014-11-24 19:40:53 -08:00
746c52644b
Merge pull request #497 from hashicorp/f-persist
...
Persist locally registered services and checks
2014-11-24 11:14:08 -08:00
521414f09a
agent: Adding TODO for future optimization
2014-11-24 11:09:04 -08:00
1f5af52e0b
agent: pass error through when writing state files
2014-11-24 01:58:39 -08:00
ce0d27caba
agent: default restored checks to critical status
2014-11-24 01:15:18 -08:00
e3c2075a9d
agent: first pass at local service and check persistence
2014-11-24 01:10:27 -08:00
adc5d0a522
agent: implementing reverse dns lookup for ipv4 and ipv6
2014-11-23 09:16:37 +01:00
b58b35d659
Merge pull request #487 from amalaviy/ephemeral_keys
...
Ephemeral Nodes for via Session behavior settings.
2014-11-21 10:11:52 -08:00
3d4ea8142c
agent: make event buffer test non-sequential
2014-11-20 21:56:50 -08:00
3f5e0d8ec0
agent: Test event order preservation for watches
2014-11-20 20:35:52 -08:00
5badc695b8
agent: Preserve ordering of event buffer. Fixes #479
2014-11-20 19:51:08 -08:00
3aabda02b3
Clean up tests, use switch to default session.Behavior value if unspecified, unrecognized
2014-11-20 14:29:18 -05:00
aa0cecd04e
Ephemeral Nodes for via Session behavior settings.
...
Added a "delete" behavior for session invalidation, in addition to
the default "release" behavior. On session invalidation, the sessions
Behavior field is checked and if it is set to "delete", all nodes owned
by the session are deleted. If it is "release", then just the locks
are released as default.
2014-11-20 11:34:45 -05:00
accf2bbb59
agent: remove unused config variable
2014-11-19 23:18:12 -08:00
4cd89a9113
Rebase against upstream
2014-11-19 16:45:49 -08:00
a675b5faae
agent: fix gossip encryption detection
2014-11-19 16:37:40 -08:00
c9118b53bf
agent: fix loading keyring on agent start
2014-11-19 16:37:40 -08:00
196cbd27b2
agent: ignore -encrypt if provided when keyring exists
2014-11-19 16:37:40 -08:00
3b2ab70c4d
consul: clean up comments, fix globalRPC tests
2014-11-19 16:37:40 -08:00
2661bbfa27
consul: more tests, remove unused KeyManager() method
2014-11-19 16:37:40 -08:00
fcacee723b
consul: simplify keyring operations
2014-11-19 16:36:19 -08:00
00fc7fa1dd
command/keyring: adjust command help
2014-11-19 16:36:18 -08:00
b3f251de9c
command/keyring: clean up tests
2014-11-19 16:36:18 -08:00
f24ac482e3
agent: fix test cases
2014-11-19 16:36:18 -08:00
bb9617642a
agent: make rpc tests more reliable
2014-11-19 16:36:01 -08:00
d02afd42fb
agent: -encrypt appends to keyring if one exists
2014-11-19 16:36:01 -08:00
295f876923
command/agent: fix up gossip encryption indicator
2014-11-19 16:35:37 -08:00
c59107f08e
command: remove -init argument from keyring, auto-persist keyrings when using agent -encrypt
2014-11-19 16:35:13 -08:00
7f85c708dc
agent: squash some more common keyring semantics
2014-11-19 16:34:18 -08:00
daebf39946
agent: guard against empty keyring files
2014-11-19 16:34:18 -08:00
db0084ccd0
consul: use keyring operation type to cut out duplicated logic
2014-11-19 16:34:18 -08:00
33dea16567
agent: fix install key test
2014-11-19 16:34:18 -08:00
001a579d47
command/keyring: cleanup
2014-11-19 16:34:18 -08:00
bea19b5135
command/keyring: refactor, adjust tests
2014-11-19 16:34:18 -08:00
c1ea291112
command: fix panic when client RPC is asked for a keyring operation
2014-11-19 16:34:17 -08:00
1ec111bbfc
consul: kill unused struct fields
2014-11-19 16:34:17 -08:00
c4a9291bb9
command/keyring: remove unneeded -wan arg, fix tests
2014-11-19 16:34:17 -08:00
6277a76a9d
agent: adjust rpc client tests for keyring
2014-11-19 16:34:17 -08:00
52582e7365
command: fixing test cases for keyring
2014-11-19 16:34:17 -08:00
30f5f06dfe
command/keyring: clean up output
2014-11-19 16:34:17 -08:00
f6b5fc8c08
consul: cross-dc key rotation works
2014-11-19 16:34:17 -08:00
71e9715c54
consul: restructuring
2014-11-19 16:34:17 -08:00
a551a6e4a0
consul: refactor keyring, repeat RPC calls to all DC's
2014-11-19 16:34:17 -08:00
03012e8ac6
command: allow wan ring to be modified separately from lan pools
2014-11-19 16:33:34 -08:00
72fc1ceead
agent: split keyring functionality out of agent.go
2014-11-19 16:32:32 -08:00
355fc89f7f
command: test generated keyring file content and conflicting args for agent
2014-11-19 16:32:06 -08:00
f9fd1f3f05
agent: test loading keyring files for client and server
2014-11-19 16:31:40 -08:00
a9f3cbd7f0
command: various cleanup
2014-11-19 16:31:06 -08:00
986eb0eefe
agent: add tests for keyring presence checks
2014-11-19 16:31:06 -08:00
c88780fe12
command/keyring: add tests for init
2014-11-19 16:31:06 -08:00
6609cb680b
command: use separate key files for LAN/WAN
2014-11-19 16:31:06 -08:00
8dc53447a3
command: renamed keys to keyring to disambiguate usage
2014-11-19 16:31:06 -08:00
ee20698199
command/keys: refactor, restrict key operations to server nodes
2014-11-19 16:31:06 -08:00
a36ab53f25
agent: move keyring initialization out of agent, add -init option to keys command
2014-11-19 16:31:06 -08:00
dfdd7c4ef7
agent: fix keyring loading when config is passed off
2014-11-19 16:31:06 -08:00
3e64ed70df
agent: clean up keyring file implementation
2014-11-19 16:31:06 -08:00
2e92e19760
agent: refactor keyring loader
2014-11-19 16:31:06 -08:00
ee50795850
agent: install/use/remove key tests
2014-11-19 16:30:22 -08:00
0ad0805234
agent: add rpc tests for listing lan/wan gossip keys
2014-11-19 16:30:22 -08:00
b1b722dbff
command/keys: test network connection failure
2014-11-19 16:30:22 -08:00
04f2a53735
command/keys: adding more tests
2014-11-19 16:30:22 -08:00
109a3604da
command/keys: begin tests
2014-11-19 16:30:22 -08:00
5f04ae277e
command/keys: remove key command implemented
2014-11-19 16:30:22 -08:00
ccda799039
command/keys: use key command implemented
2014-11-19 16:30:22 -08:00
d52163703e
command/keys: customize info message when listing keys
2014-11-19 16:30:22 -08:00
d03ed1a9ba
agent: install key command implemented
2014-11-19 16:30:22 -08:00
b11afa33f3
command/keys: use PrefixedUi for keys command
2014-11-19 16:30:22 -08:00
164f2428ff
command/keys: fail fast if no actionable args were passed
2014-11-19 16:30:21 -08:00
cae3f0fd0b
agent: fix inversed lan/wan key listing
2014-11-19 16:30:21 -08:00
83af160fc3
command/keys: list keys working end-to-end
2014-11-19 16:30:21 -08:00
b200332ae3
command: add option for -wan to keys command
2014-11-19 16:30:21 -08:00
43a60f1424
command: basic rpc works for keys command
2014-11-19 16:30:21 -08:00
96376212ff
consul: use rpc layer only for key management functions, add rpc commands
2014-11-19 16:30:21 -08:00
f25c2c1f06
command: add skeletons for keys command
2014-11-19 16:30:21 -08:00
61e3647ac1
command: warn when passing -encrypt when keyring already exists
2014-11-19 16:30:21 -08:00
208b5ae58f
command: create serf dir if it doesn't exist, document -disable-keyring arg
2014-11-19 16:30:21 -08:00
4b26566537
consul: fix json marshaling
2014-11-19 16:30:21 -08:00
8a4ed84711
consul: first pass at keyring integration
2014-11-19 16:30:20 -08:00
dd8c0f1282
agent: Fixing wan join tests
2014-11-19 13:53:17 -08:00
5d486a6bd0
agent: Fixing config merge test
2014-11-19 13:38:58 -08:00
e831949380
agent: Fixing UiDir in test
2014-11-19 13:29:15 -08:00
de35a8e38f
agent: Fixing port collision in tests
2014-11-19 11:51:25 -08:00
dd41c69389
Merge pull request #478 from amalaviy/https
...
Added HTTPS support via a new HTTPS Port configuration option
2014-11-19 11:17:10 -08:00
2bd0e8c745
consul.Config() helper to generate the tlsutil.Config{} struct, 30 second keepalive, use keepalive for HTTP and HTTPS
2014-11-18 17:56:48 -05:00
e15262c8b7
Make the 'consul version' to return value that is from 'git describe --tags'
2014-11-18 22:15:58 +00:00
b4424a1a50
Moved TLS Config stuff to tlsutil package
2014-11-18 11:03:36 -05:00
46178dbb37
Change names to StartJoinWan, RetryJoinWan etc
2014-11-17 17:14:59 -05:00
59a68ecc26
Added HTTPS support via a new HTTPS Port configuration option similar to the HTTP Port.
2014-11-17 14:29:35 -05:00
df8d099f49
Add start-wan-join, retry-wan-join and related configuration options and commandline options
2014-11-14 10:56:39 -05:00
9ddba236d0
Merge pull request #458 from hashicorp/h-notes
...
Pass notes field from service checks through
2014-11-06 21:07:45 -08:00
398179dcad
agent: pass notes field through for checks inside of service definitions. Fixes #449
2014-11-06 18:25:21 -08:00
f5acbace17
Fixing unit tests
2014-11-03 11:40:55 -08:00
982b177e69
Support old recursor config for backwards compatibility
2014-11-03 11:28:21 -08:00
4d8f1c2133
Add multiple recursor definition support
2014-11-01 04:26:26 +09:00
97ba2703f1
agent: add support for multiple checks and config mixing
2014-10-26 13:11:25 -07:00
d4e5592360
agent: test config as a whole in services test
2014-10-26 12:00:11 -07:00
ad4598959e
Add multiple service definition support
...
This change-set adds another key to the configuration decoding called
`services`, which is expected to be a list of service definitions. It
follows the established convention of only allowing one of the keys:
`service`, `check`, `services`. For every entry in the list it calls
the corresponding decode method and appends it to the Servics of the
resulting Config.
While a similar result could be achieved with changing the Services
member of the Config struct to have named mapstruct tag it lacks the
proper time conversions provided by DecodeServiceDefinition.
2014-10-23 22:50:40 -04:00
af90aa8026
Gofmt
2014-10-20 10:21:31 -07:00
3f36515544
Switching to the pinned version of msgpack
2014-10-17 18:26:19 -07:00
c236900dba
agent: test services are in sync when added from the API
2014-10-17 17:33:27 -07:00
6b119b98f0
agent: add test for consul service sync state
2014-10-17 14:43:52 -07:00
0322bf2b7d
agent: initialize local consul service tags to fix service sync
2014-10-17 14:29:12 -07:00
c4951bb598
agent: skip syslog test on windows
2014-10-17 11:24:10 -07:00
b394dff38f
agent: optimize rpc monitor test
2014-10-16 10:20:57 -07:00
e94627be20
agent: fix failing monitor test
2014-10-15 18:23:21 -07:00
a1d2f9a3da
Merge pull request #401 from hashicorp/f-healthcheck
...
Default services to "critical" state instead of "unknown"
2014-10-15 16:50:38 -07:00
efcbcb6237
Merge pull request #400 from hashicorp/f-service-filter
...
agent: Register "consul" service in agent layer
2014-10-15 16:48:57 -07:00
54d6e256e3
agent: fix tests after default status change
2014-10-15 15:43:53 -07:00
3d712feba4
agent: fix failing test
2014-10-15 15:03:43 -07:00
b7a75a2314
formatting
2014-10-15 14:56:15 -07:00
f83f80cf22
agent: remove special case of consul service, adjust tests
2014-10-15 14:52:00 -07:00
ec63686416
consul: kill remaining use of HealthUnknown
2014-10-15 10:14:46 -07:00
967cc6d701
agent: Default health checks to critical. Fixes #341
2014-10-15 10:09:49 -07:00
cd43b486a2
agent: account for consul service in anti-entropy tests
2014-10-14 18:06:07 -07:00
80a77a82df
agent: fix node name in cli test
2014-10-14 17:49:17 -07:00
ece81c11ac
agent: re-use ConsulServiceID from consul package
2014-10-14 15:44:11 -07:00
5e66e2ae1e
agent: auto-register the consul service on server nodes
2014-10-14 15:35:00 -07:00
1759f36d43
agent: Allow 'consul' service to be targeted for events. Fixes #344
2014-10-14 12:58:52 -07:00
10d8583d0e
Merge pull request #397 from hashicorp/f-syslog
...
Filter messages logged to syslog
2014-10-14 12:02:03 -07:00
5324e71cec
agent: Filter messages logged to syslog. Fixes #272
2014-10-13 22:38:12 -07:00
8ee22d7fc4
agent: Fixing multiple headers for /v1/event/list endpoint. Fixes #361
2014-10-13 17:53:54 -07:00
f11396efaf
agent: Fixing tests
2014-10-13 17:52:51 -07:00
2c1add1c67
Merge pull request #396 from ryanuber/f-retry-join
...
agent: Retry failed joins on agent start
2014-10-13 10:46:10 -07:00
b78e063ea7
command: formatting
2014-10-12 12:45:40 -07:00
c75539560f
agent: test max retries in config
2014-10-12 12:40:52 -07:00
1ec68be726
command/agent: add help for retry join
2014-10-12 12:35:25 -07:00
92e79f51a5
agent: add retry join tests
2014-10-12 12:27:03 -07:00
0249700bff
agent: test retry join config
2014-10-12 11:20:33 -07:00
f476166fe4
agent: merge RetryInterval in config merger
2014-10-12 10:54:53 -07:00
0266592205
agent: first pass at join retry
2014-10-12 10:50:15 -07:00
1419182a5c
agent: tests for DNS truncate config
2014-09-30 13:04:31 -07:00
a805e17b9c
Adding support for enabling the DNS truncate flag for UDP queries.
2014-09-30 15:15:36 -04:00
7f8f3c8edc
Remove redundant assignment
2014-09-29 14:22:31 +02:00
554fc14f7d
Go format fix
2014-09-19 10:51:03 +02:00
63946e04c4
Also change the call sites. *sigh*
2014-09-18 12:55:09 +02:00
6f50f5d789
Fix style issue in remote_exec_test
2014-09-18 11:04:20 +02:00
2d77553be4
Remove test code duplication
2014-09-17 21:33:03 +02:00
df2959ce42
Pass exitCode by reference
...
Arguments to defer statements are evaluated when the defer statement is
evaluated, so pass exitCode by reference instead.
Fixes issue #346
2014-09-17 21:17:51 +02:00
2067cc32dd
agent: Fixing issue with multiple watches. Fixes #337
2014-09-15 10:56:04 -07:00
58bc3bb611
Fix indent space
2014-09-05 11:09:37 +09:00
9c16ce0cae
agent: Fixing config merge issue
2014-09-02 14:49:31 -07:00
a1591d21d7
agent: Support for checkpoint
2014-09-02 14:23:43 -07:00
55c695493b
agent: Address overrides. Fixes #301 and #253
2014-09-02 12:47:40 -07:00
10c276dae6
agent: Adding address configurations
2014-09-02 12:42:14 -07:00
47e30adf13
agent: statsd support. Fixes #247
2014-09-02 11:26:17 -07:00
9e76e93a35
command/exec: Improving output
2014-09-01 14:46:22 -07:00
f450381124
command/exec: Tuning constants
2014-09-01 14:46:22 -07:00
122d919d19
agent: Handle cancel for idle wait
2014-09-01 14:46:22 -07:00
1c8c7543ac
command/exec: Fixing verbose flag
2014-09-01 14:46:22 -07:00
17269f7a83
command/exec: Testing exec
2014-09-01 14:46:22 -07:00
4d46817a96
command/exec: High level tests
2014-09-01 14:46:22 -07:00
7214fc37ea
agent: Testing remote exec
2014-09-01 14:46:22 -07:00
b2c6934dd5
agent: Refactor remote exec write code
2014-09-01 14:46:22 -07:00
9cbc3986c5
agent: testing remote exec writer
2014-09-01 14:46:21 -07:00
ee7fb008fe
command/exec: Fixing use of shutdown ch
2014-09-01 14:46:21 -07:00
75bc21a1f6
agent: First pass at remote exec support
2014-09-01 14:46:21 -07:00
233636dc94
command/exec: First pass at exec command
2014-09-01 14:46:21 -07:00
f14af4adad
command: Adding method to get client with datacenter
2014-09-01 14:46:21 -07:00
1a6666027c
agent: Refactor msgpack serialization into util
2014-09-01 14:46:21 -07:00
0cc1f8d42b
agent: Adding remote exec configuration
2014-09-01 14:46:21 -07:00
7f9b260c93
website: typo fixes
2014-08-30 17:22:23 -07:00
c982301b07
command/event: Adding new event command
2014-08-28 16:40:31 -07:00
d9ae1da296
agent: Prevent hot spin on event list
2014-08-28 15:55:36 -07:00
3b01d24376
command/watch: Changes for event watch
2014-08-28 15:51:12 -07:00
a699b14da8
agent: Support event filtering on name
2014-08-28 15:25:53 -07:00
99d39db982
agent: First pass at multi-DC support
2014-08-28 15:00:49 -07:00
8d68940cec
agent: Testing event endpoints
2014-08-28 14:38:00 -07:00
93c925dd14
agent: First pass at event endpoints
2014-08-28 13:42:07 -07:00
215002ef04
agent: Testing user events
2014-08-28 12:42:24 -07:00
f911e9b681
agent: Methods to get the user events
2014-08-28 11:15:55 -07:00
4ef9040e02
agent: remove userEventEnc type
2014-08-28 10:56:30 -07:00
69bdeb900a
agent: Adding event ingestion
2014-08-27 17:01:10 -07:00
1ebf074e13
agent: working on user events
2014-08-27 16:49:12 -07:00
b1cf52db01
consul: expose UserEvent from Serf
2014-08-26 18:50:03 -07:00
168ddedcee
agent: Support encrypt CLI flag. Fixes #245 .
2014-08-22 15:08:15 -07:00
8fad8538e8
agent: ACL violation returns 403 code
2014-08-22 12:59:47 -07:00
5afc3e5a85
agent: Use SHELL if provided. Fixes #237 .
2014-08-22 12:47:58 -07:00
9e061a3886
command/watch: Adding tests
2014-08-21 16:08:21 -07:00
1b88eb4d98
command/watch: First pass at command
2014-08-21 16:02:41 -07:00
04dc1ee64a
agent: Refactor script invoke
2014-08-21 14:28:16 -07:00
f82a38ab12
agent: First pass at agent-based watches
2014-08-21 13:09:13 -07:00
d36fcd2357
agent: Changing to use nested JSON for watches
2014-08-21 11:52:36 -07:00
d72158b71b
agent: Adding watches config
2014-08-19 14:29:01 -07:00
78b09c5764
agent: Fixing ACL tests with token param
2014-08-19 14:28:49 -07:00
cd3bbb4097
agent: Strict PUT for modifying ACLs
2014-08-19 14:28:34 -07:00
ee614ace35
agent: Enforce PUT for session destroy. Fixes #285 .
2014-08-19 10:53:25 -07:00
98b83d9c0d
Merge pull request #288 from gmr/rfc-2782-srv-lookups
...
Add RFC-2782 style SRV lookups
2014-08-18 16:01:18 -07:00
4a61a8bd31
agent: Rename acl delete to destroy
2014-08-18 15:46:58 -07:00
e27bead346
agent: Copy token in KV PUT/DELETE
2014-08-18 15:46:24 -07:00
bac1527281
agent: Fixing the ACL tests
2014-08-18 15:46:23 -07:00
4e7d57a3db
agent: Adding token parsing
2014-08-18 15:46:23 -07:00
d3065d1532
agent: Special handler if ACL support is disabled
2014-08-18 15:46:23 -07:00
6f7bf36ee9
agent: ACL endpoint tests
2014-08-18 15:46:21 -07:00
d628aab646
agent: ACL endpoint
2014-08-18 15:46:21 -07:00
ca6a8aef55
agent: Adding ACL master token
2014-08-18 15:46:20 -07:00
ebae394863
consul: ACL setting passthrough
2014-08-18 15:46:20 -07:00
0838ed0475
agent: Changing ACL config names
2014-08-18 15:46:20 -07:00
489772eda3
agent: Adding new ACL flags
2014-08-18 15:46:20 -07:00
b4989ef9ee
Fix the over-indent
2014-08-18 15:50:36 -04:00
97b8960bd8
Add RFC-2782 style SRV lookups
2014-08-18 15:45:56 -04:00
6c3aaa81c1
modified so ?pretty=anything will work
2014-08-01 14:28:46 -06:00
e31c6b8b83
make pretty condition more readable
2014-08-01 14:24:36 -06:00
316673a2e5
added URL query parameter of "pretty=true" to output formatted json from the HTTP API
2014-08-01 14:11:51 -06:00
d8c772efb8
Remove DC case-insensitive check from node test
2014-07-23 23:42:22 +02:00
eab2cbc1ef
Always lowercase incoming DNS query
2014-07-23 23:42:22 +02:00
93509f755e
Test DNS case-insensitivity
2014-07-23 23:42:22 +02:00
84e5bd2727
agent: Provide better DNS setup error messages
2014-07-17 10:57:21 -07:00
c13f9f2a98
agent: Fixing issue with excessive failed node filtering
2014-07-16 15:11:45 -07:00
95f3ebcb43
While we're at it, make statsite_addr work at all.
2014-07-10 18:16:47 -07:00
ba8c0802c7
agent: Fixing passing filter. Fixes #241
2014-07-05 09:49:21 -07:00
358b473e01
Updating documentation for new bootstrap method
2014-07-01 15:02:26 -07:00
80b86c9ee9
Rename Expect to BootstrapExpect. Fixes #223 .
2014-06-19 17:08:55 -07:00
e54ad5d878
Fixing merge conflict
2014-06-18 15:48:46 -07:00
93034084ce
agent: Fixing missing copy of RejoinAfterLeave flag. #110
2014-06-18 10:32:19 -07:00
a2fea2ce55
Utilise new raft.SetPeers() method, move expect logic to leader.go.
...
This way, we don't use EnableSingleMode, nor cause chaos adding peers.
Signed-off-by: Robert Xu <robxu9@gmail.com>
2014-06-18 12:03:30 -04:00
be0554778d
agent: Fix issues with re-registration. Fixes #216
2014-06-17 16:48:19 -07:00
31c392813c
Add expect bootstrap '-expect=n' mode.
...
This allows for us to automatically bootstrap a cluster of nodes after
'n' number of server nodes join. All servers must have the same 'n' set, or
they will fail to join the cluster; all servers will not join the peer set
until they hit 'n' server nodes.
If the raft commit index is not empty, '-expect=n' does nothing because it
thinks you've already bootstrapped.
Signed-off-by: Robert Xu <robxu9@gmail.com>
2014-06-16 17:40:33 -04:00
0577ec21a8
agent: Copy ServerName config
2014-06-13 11:27:44 -07:00
91373968a8
Adding server_name configuration for TLS
2014-06-13 11:10:27 -07:00
eeb9911a28
agent: Improve test reliability
2014-06-11 12:01:14 -07:00
7b6adb91bd
command/reload: Adding new command
2014-06-11 10:58:26 -07:00
074c238ce8
agent: Add reload to RPC clien
2014-06-11 10:53:34 -07:00
4f77db2d47
agent: Watch reload channel for trigger
2014-06-11 10:53:28 -07:00
46c535a834
agent: Adding reload RPC command
2014-06-11 10:53:12 -07:00
1021f48ad2
agent: Set custom syslog facility. Fixes #170 .
2014-06-11 10:28:55 -07:00
648429288e
agent: Adding SyslogFacility configuration
2014-06-11 10:18:19 -07:00
e972de44ad
agent: Cleanup handling of defer checks
2014-06-10 10:42:55 -07:00
4909c74175
agent: Fixing merge of CheckUpdateInterval
2014-06-09 21:34:19 -07:00
801a472042
agent: Prevent anti-entropy from doing early sync of check output
2014-06-09 16:00:25 -07:00
ca0887b401
agent: Update config test to handle zero value CheckUpdateInterval
2014-06-09 13:00:32 -07:00
bc9ea2af9a
agent: leave inSync until the defer runs
2014-06-09 12:57:50 -07:00
33c2132949
agent: Defer sync based on CheckUpdateInterval
2014-06-09 12:46:29 -07:00
99ac4dc1bb
agent: Allow CheckUpdateInterval to be zero
2014-06-09 12:46:10 -07:00
c99e6e082c
agent: Adding new CheckUpdateInterval config
2014-06-09 12:13:14 -07:00
bd39973df1
agent: Validate datacenter is valid. Fixes #169 .
2014-06-09 11:57:15 -07:00
9e925bf458
consul: Adding support for optional session name
2014-06-09 11:42:28 -07:00
8d4c0aa0ce
agent: Testing DNS TTLs
2014-06-08 16:14:21 -07:00
ba4c40531d
agent: First pass supporting DNS TTLs
2014-06-08 16:02:17 -07:00
dea2eba631
agent: Support stale queries with retries
2014-06-08 16:02:17 -07:00
cb9540ea04
agent: Test DNSConfig merge logic
2014-06-08 16:02:16 -07:00
af83293f13
agent: Testing DNSConfig parsing
2014-06-08 16:02:16 -07:00
8f6708653f
agent: Adding DNS more configuration
2014-06-08 16:02:16 -07:00
c656bbfbcf
Rename shared msgpack handle
2014-06-08 14:02:42 -07:00
af24734cc2
command/members: Remove tests for old role filter
2014-06-08 14:02:24 -07:00
d209517d50
reuse codec.MsgpackHandle
2014-06-07 01:13:38 -07:00
7fc5b7a920
command/members: Improve output. Fixes #143
2014-06-06 16:00:02 -07:00
b5bd20634a
consul: Gossip the build using Serf
2014-06-06 15:36:40 -07:00
39cdecb5d0
agent: Add version to info output
2014-06-06 14:40:22 -07:00
bf009097ae
agent: Ensure we don't retry too often
2014-06-06 14:38:01 -07:00
2c13f8a03e
Re-configure `LeaderLeaseTimeout` to pass validation
2014-05-30 20:57:39 +02:00
1ac127b73e
agent: Omit certains keys from the /self endpoint
2014-05-29 11:24:37 -07:00
890d4d771f
consul: Ensure clients also implement LocalMember
2014-05-29 11:21:56 -07:00
ead134c890
Return both member and config in `/v1/agent/self`
2014-05-28 00:09:28 +02:00
a028c3ae93
Add `/v1/agent/self` and return local agent config
2014-05-27 01:15:33 +02:00
60a4baed11
Increase wait time after `agent.StartSync()`
2014-05-27 01:00:13 +02:00
93e89b8148
Remove TODO comments
2014-05-26 23:44:46 +02:00
63c96627df
tests: Don't generate binary output from checks.
...
The tests will end up logging the check output, and spewing random
binary all over a terminal never results in anything good.
2014-05-26 13:23:10 -07:00
868795222f
command/agent: added missing syslog wrapper
2014-05-21 22:05:36 -07:00
5fa10c912e
Support rejoin after leave. Fixes #110 .
2014-05-21 12:32:24 -07:00
999e7abed4
agent: Improving test reliability
2014-05-21 12:31:22 -07:00
9f2631f383
agent: syslog support. Fixes #105 .
2014-05-21 12:06:03 -07:00
03713e1eb3
agent: Provide log info about encryption. Fixes #151 .
2014-05-20 17:00:04 -07:00
ce5470cbc2
agent: Support for raw key lookup. Fixes #150 .
2014-05-20 16:53:43 -07:00
07a75899ef
agent: Adding locking support to KV store
2014-05-20 16:25:29 -07:00
60c66ec7b5
agent: Adding support for specifying LockDelay, defaults to 15 seconds.
2014-05-20 16:25:29 -07:00
a53cb6e1dd
agent: Session endpoint tests
2014-05-20 16:25:29 -07:00
eb9a51bced
agent: Require PUT to SessionCreate
2014-05-20 16:25:29 -07:00
9470f9a5a2
gofmt
2014-05-20 16:25:29 -07:00
d5b1330227
agent: First pass at session endpoints
2014-05-20 16:25:29 -07:00
6c0479f082
Merge pull request #136 from hashicorp/f-testutil-package
...
WIP: Proof of concept using `WaitForResult` in tests
2014-05-16 15:03:50 -07:00
14a84f4a4f
agent: Support -advertise cli flag. Fixes #156 .
2014-05-16 10:49:55 -07:00
d9a27fd5ac
command/agent: block windows socket errors
2014-05-15 11:29:32 -07:00
ec547d5b99
command/agent: find proper private IP on Windows
...
/cc @armon
2014-05-15 11:27:30 -07:00
2f23eb42ea
Add TODOs for failing tests
2014-05-09 11:38:29 +02:00
d199dcde9b
Run checks more often in `expectStatus`
2014-05-09 03:41:10 +02:00
f3354b028e
Fix race condition in `TestHTTPAgentJoin_WAN`
2014-05-09 02:30:05 +02:00
3a71349ee4
Remove all sleeps from `ui_endpoint_test.go`
2014-05-09 02:08:01 +02:00
e2e5999fdb
Remove all sleeps from `status_endpoint_test.go
2014-05-09 02:06:19 +02:00
bf540c7217
Remove most sleeps from `rpc_client_test.go`
2014-05-09 01:19:05 +02:00
1ee709ba38
Require datacenter argument for `WaitForLeader`
2014-05-09 01:17:35 +02:00
01e085cc64
agent: Correct spelling of separator. Fixes #101 .
2014-05-07 15:25:17 -07:00
463f85c3c7
Move argument structs back in original position
2014-05-07 23:51:15 +02:00
c624161827
Move `WaitForLeader` calls to top of test
2014-05-07 23:47:16 +02:00
bdbe97545a
Drop client arguments from `WaitForLeader`
2014-05-07 23:41:14 +02:00
795fab8a61
Remove some sleeps from `local_test.go`
2014-05-07 23:27:32 +02:00
89ead7bc4e
Remove all sleeps from `kvs_endpoint_test.go`
2014-05-07 23:17:10 +02:00
58bb06ff54
Drop unnecessary sleep
2014-05-07 23:17:00 +02:00
70444ea4b7
Remove all sleeps from `health_endpoint_test.go`
2014-05-07 23:12:53 +02:00
6e39de1d26
Remove all sleeps from `catalog_endpoint_test.go`
2014-05-07 23:02:59 +02:00
16a2f14ef1
Fix formatting in `TestForceLeaveCommandRun`
2014-05-07 22:50:34 +02:00
e77c3180d8
Remove all sleeps from `agent_endpoint_test.go`
2014-05-07 22:50:18 +02:00
e76f9f36c6
Remove all sleeps from `force_leave_test.go`
2014-05-07 22:45:16 +02:00
82ec4e5fba
Add `testutils.WaitForLeader` and truly wait
2014-05-07 11:43:42 +02:00
a1c66d68c8
agent: Limit KV entries to 512KB. Fixes #123 .
2014-05-06 14:18:32 -07:00
deaf36a1d9
agent: Minor cleanups
2014-05-06 12:43:33 -07:00
95f2597fe9
Fix race condition in `TestCheckTTL`
...
Apparently the execution of `TestCheckTTL` could sometime take > 10ms
causing it to fail. This commit will eliminate the race condition for
most modern hardware.
2014-05-06 20:54:49 +02:00
b61e854f56
Return pid file errors and fix help formatting
2014-05-06 13:04:22 -04:00
e0d477896a
Add flag to agent to write pid file
2014-05-05 23:39:18 -04:00
4171b3d484
Return exit code 2 if member filter doesn't match any node
2014-05-04 11:54:45 +02:00
cd08e81958
agent: Key list of root returns empty list with 200 instead of 404
2014-04-30 23:44:30 -04:00
9f2e236cf8
agent: Summarize node level checks as well
2014-04-30 23:44:29 -04:00
947e5b58ba
agent: Support key listing with seperator
2014-04-30 23:44:27 -04:00
d1648871ea
agent: Adding UI services endpoint
2014-04-30 23:43:59 -04:00
250b8f2247
agent: Adding node UI endpoint
2014-04-30 23:43:59 -04:00
c794dac7b1
agent: Adding nodes UI endpoint
2014-04-30 23:43:59 -04:00
c6b326a362
agent: Redirect to UI if we have one
2014-04-30 23:43:58 -04:00
ba69350cef
agent: Simplify serving of ui files
2014-04-30 23:43:57 -04:00
6f833a5a73
agent: Improving UI file serving
2014-04-30 23:43:56 -04:00
4983f66e75
agent: Adding endpoint to serve the UI
2014-04-30 23:43:56 -04:00
32889c2f70
agent: Pass UiDir into the HTTP layer
2014-04-30 23:43:56 -04:00
9327bbc400
agent: Adding -ui-dir CLI flag
2014-04-30 23:43:56 -04:00
47f6cef91d
agent: Adding UiDir config param
2014-04-30 23:43:56 -04:00
d1889a6f4b
agent: Limit health check output to 4K. Fixes #83 .
2014-04-29 15:28:56 -07:00
8ea7d7fbd9
command/info: Move warning output to the top
2014-04-29 11:09:14 -07:00
46b0fc24d9
command/info: Warn on GOMAXPROCS = 1. Fixes #87 .
2014-04-29 10:58:49 -07:00
778dfb8fd2
agent: Write out the meta data before a potential 404
2014-04-26 12:20:49 -06:00
73a9c1389e
When mangaling JSON to parse durations do a case insensitive key lookup
2014-04-24 19:56:55 -07:00
7e27ded378
agent: Adding debug log messages
2014-04-23 12:21:47 -07:00
e210f9b541
agent: Adding random stagger to anti-entropy. Fixes #72 .
2014-04-23 12:21:34 -07:00
2845d24cfa
Store check output in dedicated field. Fixes #59 .
2014-04-21 16:20:22 -07:00
d6b7dd5b62
agent: Support server-side filtering of passing checks. Fixes #57 .
2014-04-21 16:08:26 -07:00
cb33d73ffe
Merge pull request #68 from hashicorp/f-consistency
...
Adding support for "stale" and "consistent" read modes
2014-04-21 15:55:31 -07:00
c7605f070d
agent: Improve DNS parser. Fixes #39 .
2014-04-21 15:33:01 -07:00
48ce8e3e86
agent: Fix decoding of checks. Fixes #60
2014-04-21 15:02:36 -07:00
b1bfd97438
agent: Adding minimum check interval. Fixes #64 .
2014-04-21 14:42:42 -07:00
93146c1e1b
agent: Adding HTTP tests for new features
2014-04-21 13:19:18 -07:00
bcff269238
agent: Updating tests for new API
2014-04-21 13:11:05 -07:00
53d3449947
agent: Remove wrapQuery, call setMeta directly
2014-04-21 12:40:11 -07:00
4c039aa4d5
agent: Parse the consistency flags
2014-04-21 12:26:12 -07:00
71b95a0f47
agent: Updating to remove BlockingQuery
2014-04-21 12:25:36 -07:00
4f67ca5488
agent: Fixing similar deregister routing bug with checks
2014-04-18 10:56:00 -07:00
f9fba3156b
agent: Fix service deregister routing
2014-04-18 10:54:18 -07:00
19441f5095
documentation: minor comment consistency in agent.go
2014-04-17 22:46:31 -07:00
852a47fe37
Ensure we write json header before writing bytes
...
In net/http once we've issued a Write() the response is sent
over the wire including the header! The tests didn't catch
this because I used a net/http/httptest.RequestRecorder
which doesn't follow those semantics.
2014-04-17 14:53:07 -04:00
e83f723a66
HTTP: add content-type: application/json header
2014-04-17 14:38:14 -04:00
aa2e2d415f
command/members: API update for columnize
2014-04-16 16:21:30 -07:00
9493b9c126
agent: Add warning if windows and running server mode
2014-04-14 16:49:50 -07:00
293733b74f
agent: Simplify the local state sync
2014-04-14 12:57:54 -07:00
3b0e397851
agent: Fixing wrong port usage for server
2014-04-14 12:37:49 -07:00
e06dc97a8a
agent: Testing start_join parsing
2014-04-11 17:03:19 -07:00
32eb65316f
agent: Adding support for -join flag. Fixes #33 .
2014-04-11 16:59:16 -07:00
969d2a6c20
command: Fixing more tests
2014-04-11 16:34:29 -07:00
360158590e
agent: Nice info output
2014-04-11 15:54:03 -07:00
738310bff0
agent: Simplifying configs
2014-04-11 15:46:55 -07:00
2663b28f3a
agent: First pass at improving flags
2014-04-11 15:22:35 -07:00
88faad86ce
agent: Adding tests for TLS configs
2014-04-07 15:07:00 -07:00
d1308446c3
agent: Passthrough of TLS configurations
2014-04-07 15:07:00 -07:00
d99ac77b84
agent: Add backwards compatibility hack for old 'tag' definitions
2014-04-03 14:22:43 -07:00
fd6a87748f
agent: Support multiple tags per service registration
2014-04-03 12:12:23 -07:00
976c52f3ef
agent: Adding tests for the KV endpoints
2014-03-31 20:45:57 -07:00
96bd58df20
agnet: Fix parsing of cas flag
2014-03-31 20:00:30 -07:00
a29d6c2d4e
consul: Return 404 if no entries found
2014-03-31 20:00:17 -07:00
Kyle Havlovitz