Preivously the TLS configurator would default to presenting auto TLS
certificates as client certificates.
Server agents should not have this behavior and should instead present
the manually configured certs. The autoTLS certs for servers are
exclusively used for peering and should not be used as the default for
outbound communication.
This commit introduces a new ACL token used for internal server
management purposes.
It has a few key properties:
- It has unlimited permissions.
- It is persisted through Raft as System Metadata rather than in the
ACL tokens table. This is to avoid users seeing or modifying it.
- It is re-generated on leadership establishment.
* Typos
* Test failing
* Convert values <1ms to decimal
* Fix test
* Update docs and test error msg
* Applied suggested changes to test case
* Changelog file and suggested changes
* Update .changelog/12905.txt
Co-authored-by: Chris S. Kim <kisunji92@gmail.com>
* suggested change - start duration with microseconds instead of nanoseconds
* fix error
* suggested change - floats
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
Co-authored-by: Chris S. Kim <kisunji92@gmail.com>
* Config-entry: Support proxy config in service-defaults
* Update website/content/docs/connect/config-entries/service-defaults.mdx
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
Prior to #13244, connect proxies and gateways could only be configured by an
xDS session served by the local client agent.
In an upcoming release, it will be possible to deploy a Consul service mesh
without client agents. In this model, xDS sessions will be handled by the
servers themselves, which necessitates load-balancing to prevent a single
server from receiving a disproportionate amount of load and becoming
overwhelmed.
This introduces a simple form of load-balancing where Consul will attempt to
achieve an even spread of load (xDS sessions) between all healthy servers.
It does so by implementing a concurrent session limiter (limiter.SessionLimiter)
and adjusting the limit according to autopilot state and proxy service
registrations in the catalog.
If a server is already over capacity (i.e. the session limit is lowered),
Consul will begin draining sessions to rebalance the load. This will result
in the client receiving a `RESOURCE_EXHAUSTED` status code. It is the client's
responsibility to observe this response and reconnect to a different server.
Users of the gRPC client connection brokered by the
consul-server-connection-manager library will get this for free.
The rate at which Consul will drain sessions to rebalance load is scaled
dynamically based on the number of proxies in the catalog.
http.Transport keeps a pool of connections and should be reused when possible. We instantiate a new http.DefaultTransport for every metrics request, making large numbers of concurrent requests inefficiently spin up new connections instead of reusing open ones.
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
By adding a SpiffeID for server agents, servers can now request a leaf
certificate from the Connect CA.
This new Spiffe ID has a key property: servers are identified by their
datacenter name and trust domain. All servers that share these
attributes will share a ServerURI.
The aim is to use these certificates to verify the server name of ANY
server in a Consul datacenter.
This is the OSS portion of enterprise PR 2489.
This PR introduces a server-local implementation of the
proxycfg.InternalServiceDump interface that sources data from a blocking query
against the server's state store.
For simplicity, it only implements the subset of the Internal.ServiceDump RPC
handler actually used by proxycfg - as such the result type has been changed
to IndexedCheckServiceNodes to avoid confusion.
This is the OSS portion of enterprise PR 2460.
Introduces a server-local implementation of the proxycfg.ResolvedServiceConfig
interface that sources data from a blocking query against the server's state
store.
It moves the service config resolution logic into the agent/configentry package
so that it can be used in both the RPC handler and data source.
I've also done a little re-arranging and adding comments to call out data
sources for which there is to be no server-local equivalent.
When a sidecar proxy is registered, a check is automatically added.
Previously, the address this check used was the underlying service's
address instead of the proxy's address, even though the check is testing
if the proxy is up.
This worked in most cases because the proxy ran on the same IP as the
underlying service but it's not guaranteed and so the proper default
address should be the proxy's address.
* draft commit
* add changelog, update test
* remove extra param
* fix test
* update type to account for nil value
* add test for custom passive health check
* update comments and tests
* update description in docs
* fix missing commas
* validate args before deleting proxy defaults
* add changelog
* validate name when normalizing proxy defaults
* add test for proxyConfigEntry
* add comments
To ease the transition for users, the original gRPC
port can still operate in a deprecated mode as either
plain-text or TLS mode. This behavior should be removed
in a future release whenever we no longer support this.
The resulting behavior from this commit is:
`ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports.
`ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port.
`ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
Peerings are terminated when a peer decides to delete the peering from
their end. Deleting a peering sends a termination message to the peer
and triggers them to mark the peering as terminated but does NOT delete
the peering itself. This is to prevent peerings from disappearing from
both sides just because one side deleted them.
Previously the Delete endpoint was skipping the deletion if the peering
was not marked as active. However, terminated peerings are also
inactive.
This PR makes some updates so that peerings marked as terminated can be
deleted by users.
We need to watch for changes to peerings and update the server addresses which get served by the ring buffer.
Also, if there is an active connection for a peer, we are getting up-to-date server addresses from the replication stream and can safely ignore the token's addresses which may be stale.
Contains 2 changes to the GetEnvoyBootstrapParams response to support
consul-dataplane.
Exposing node_name and node_id:
consul-dataplane will support providing either the node_id or node_name in its
configuration. Unfortunately, supporting both in the xDS meta adds a fair amount
of complexity (partly because most tables are currently indexed on node_name)
so for now we're going to return them both from the bootstrap params endpoint,
allowing consul-dataplane to exchange a node_id for a node_name (which it will
supply in the xDS meta).
Properly setting service for gateways:
To avoid the need to special case gateways in consul-dataplane, service will now
either be the destination service name for connect proxies, or the gateway
service name. This means it can be used as-is in Envoy configuration (i.e. as a
cluster name or in metric tags).
This is the OSS portion of enterprise PR 2339.
It improves our handling of "irrecoverable" errors in proxycfg data sources.
The canonical example of this is what happens when the ACL token presented by
Envoy is deleted/revoked. Previously, the stream would get "stuck" until the
xDS server re-checked the token (after 5 minutes) and terminated the stream.
Materializers would also sit burning resources retrying something that could
never succeed.
Now, it is possible for data sources to mark errors as "terminal" which causes
the xDS stream to be closed immediately. Similarly, the submatview.Store will
evict materializers when it observes they have encountered such an error.
newMockSnapshotHandler has an assertion on t.Cleanup which gets called before the event publisher is cancelled. This commit reorders the context.WithCancel so it properly gets cancelled before the assertion is made.
Consul 1.13.0 changed ServiceVirtualIP to use PeeredServiceName instead of ServiceName which was a breaking change for those using service mesh and wanted to restore their snapshot after upgrading to 1.13.0.
This commit handles existing data with older ServiceName and converts it during restore so that there are no issues when restoring from older snapshots.
1. Create a bexpr filter for performing the filtering
2. Change the state store functions to return the raw (not aggregated)
list of ServiceNodes.
3. Move the aggregate service tags by name logic out of the state store
functions into a new function called from the RPC endpoint
4. Perform the filtering in the endpoint before aggregation.
If startListeners successfully created listeners for some of its input addresses but eventually failed, the function would return an error and existing listeners would not be cleaned up.
Previously establishment and pending secrets were only checked at the
RPC layer. However, given that these are Check-and-Set transactions we
should ensure that the given secrets are still valid when persisting a
secret exchange or promotion.
Otherwise it would be possible for concurrent requests to overwrite each
other.
Previously there was a field indicating the operation that triggered a
secrets write. Now there is a message for each operation and it contains
the secret ID being persisted.
Previously the updates to the peering secrets UUID table relied on
inferring what action triggered the update based on a reconciliation
against the existing secrets.
Instead we now explicitly require the operation to be given so that the
inference isn't necessary. This makes the UUID table logic easier to
reason about and fixes some related bugs.
There is also an update so that the peering secrets get handled on
snapshots/restores.
Dialers do not keep track of peering secret UUIDs, so they should not
attempt to clean up data from that table when their peering is deleted.
We also now keep peer server addresses when marking peerings for
deletion. Peer server addresses are used by the ShouldDial() helper
when determining whether the peering is for a dialer or an acceptor.
We need to keep this data so that peering secrets can be cleaned up
accordingly.
Fixes a bug where a service getting deleted from the catalog would cause
the ConfigSource to spin in a hot loop attempting to look up the service.
This is because we were returning a nil WatchSet which would always
unblock the select.
Kudos to @freddygv for discovering this!
* Avoid logging StreamSecretID
* Wrap additional errors in stream handler
* Fix flakiness in leader test and rename servers for clarity. There was
a race condition where the peering was being deleted in the test
before the stream was active. Now the test waits for the stream to be
connected on both sides before deleting the associated peering.
* Run flaky test serially
* defaulting to false because peering will be released as beta
* Ignore peering disabled error in bundles cachetype
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: freddygv <freddy@hashicorp.com>
Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
* add golden files
* add support to http in tgateway egress destination
* fix slice sorting to include both address and port when using server_names
* fix listener loop for http destination
* fix routes to generate a route per port and a virtualhost per port-address combination
* sort virtual hosts list to have a stable order
* extract redundant serviceNode
When we receive a FailedPrecondition error, retry that more quickly
because we expect it will resolve shortly. This is particularly
important in the context of Consul servers behind a load balancer
because when establishing a connection we have to retry until we
randomly land on a leader node.
The default retry backoff goes from 2s, 4s, 8s, etc. which can result in
very long delays quite quickly. Instead, this backoff retries in 8ms
five times, then goes exponentially from there: 16ms, 32ms, ... up to a
max of 8152ms.
There were 16 combinations of tests but 4 of them were duplicates since the default key type and bits were "ec" and 256. That entry was commented out to reduce the subtest count to 12.
testrpc.WaitForLeader was failing on arm64 environments; the cause is unknown but it might be due to the environment being flooded with parallel tests making RPC calls. The RPC polling+retry was replaced with a simpler check for leadership based on raft.
- when register service using catalog endpoint, the key of service
name actually should be "service". Add this information to the
error message will help user to quickly fix in the request.
Now that peered upstreams can generate envoy resources (#13758), we need a way to disambiguate local from peered resources in our metrics. The key difference is that datacenter and partition will be replaced with peer, since in the context of peered resources partition is ambiguous (could refer to the partition in a remote cluster or one that exists locally). The partition and datacenter of the proxy will always be that of the source service.
Regexes were updated to make emitting datacenter and partition labels mutually exclusive with peer labels.
Listener filter names were updated to better match the existing regex.
Cluster names assigned to peered upstreams were updated to be synthesized from local peer name (it previously used the externally provided primary SNI, which contained the peer name from the other side of the peering). Integration tests were updated to assert for the new peer labels.
This commit adds a new ACL rule named "peering" to authorize
actions taken against peering-related endpoints.
The "peering" rule has several key properties:
- It is scoped to a partition, and MUST be defined in the default
namespace.
- Its access level must be "read', "write", or "deny".
- Granting an access level will apply to all peerings. This ACL rule
cannot be used to selective grant access to some peerings but not
others.
- If the peering rule is not specified, we fall back to the "operator"
rule and then the default ACL rule.
This is the OSS portion of enterprise PR 2377.
Adds a server-local implementation of the proxycfg.ExportedPeeredServices
interface that sources data from a blocking query against the server's
state store.
Update generate token endpoint (rpc, http, and api module)
If ServerExternalAddresses are set, it will override any addresses gotten from the "consul" service, and be used in the token instead, and dialed by the dialer. This allows for setting up a load balancer for example, in front of the consul servers.
This is the OSS portion of enterprise PR 2352.
It adds a server-local implementation of the proxycfg.PeeredUpstreams interface
based on a blocking query against the server's state store.
It also fixes an omission in the Virtual IP freeing logic where we were never
updating the max index (and therefore blocking queries against
VirtualIPsForAllImportedServices would not return on service deletion).
Peered upstreams has a separate loop in xds from discovery chain upstreams. This PR adds similar but slightly modified code to add filters for peered upstream listeners, clusters, and endpoints in the case of transparent proxy.
The client is set to send keepalive pings every 30s. The server
keepalive enforcement must be set to a number less than that,
otherwise it will disconnect clients for sending pings too often.
MinTime governs the minimum amount of time between pings.
This mimics xDS's discovery protocol where you must request a resource
explicitly for the exporting side to send those events to you.
As part of this I aligned the overall ResourceURL with the TypeURL that
gets embedded into the encoded protobuf Any construct. The
CheckServiceNodes is now wrapped in a better named "ExportedService"
struct now.
* peerstream: dialer should reconnect when stream closes
If the stream is closed unexpectedly (i.e. when we haven't received
a terminated message), the dialer should attempt to re-establish the
stream.
Previously, the `HandleStream` would return `nil` when the stream
was closed. The caller then assumed the stream was terminated on purpose
and so didn't reconnect when instead it was stopped unexpectedly and
the dialer should have attempted to reconnect.
Ensure that the peer stream replication rpc can successfully be used with TLS activated.
Also:
- If key material is configured for the gRPC port but HTTPS is not
enabled now TLS will still be activated for the gRPC port.
- peerstream replication stream opened by the establishing-side will now
ignore grpc.WithBlock so that TLS errors will bubble up instead of
being awkwardly delayed or suppressed
A Node ID is not a required field with Consul’s data model. Therefore we cannot reliably expect all uses to have it. However the node name is required and must be unique so its equally as good of a key for the internal healthSnapshot node tracking.
Prior to this the dialing side of the peering would only ever work within the default partition. This commit allows properly parsing the partition field out of the API struct request body, query param and header.
This is the OSS portion of enterprise PR 2265.
This PR provides a server-local implementation of the
proxycfg.FederationStateListMeshGateways interface based on blocking queries.
This is the OSS portion of enterprise PR 2259.
This PR provides a server-local implementation of the proxycfg.GatewayServices
interface based on blocking queries.
This is the OSS portion of enterprise PR 2250.
This PR provides server-local implementations of the proxycfg.TrustBundle and
proxycfg.TrustBundleList interfaces, based on local blocking queries.
This is the OSS portion of enterprise PR 2249.
This PR introduces an implementation of the proxycfg.Health interface based on a
local materialized view of the health events.
It reuses the view and request machinery from agent/rpcclient/health, which made
it super straightforward.
This is the OSS portion of enterprise PR 2242.
This PR introduces a server-local implementation of the proxycfg.ServiceList
interface, backed by streaming events and a local materializer.
Previously, public referred to gRPC services that are both exposed on
the dedicated gRPC port and have their definitions in the proto-public
directory (so were considered usable by 3rd parties). Whereas private
referred to services on the multiplexed server port that are only usable
by agents and other servers.
Now, we're splitting these definitions, such that external/internal
refers to the port and public/private refers to whether they can be used
by 3rd parties.
This is necessary because the peering replication API needs to be
exposed on the dedicated port, but is not (yet) suitable for use by 3rd
parties.
- Use some protobuf construction helper methods for brevity.
- Rename a local variable to avoid later shadowing.
- Rename the Nonce field to be more like xDS's naming.
- Be more explicit about which PeerID fields are empty.
If someone were to switch a peer-exported service from L4 to L7 there
would be a brief SAN validation hiccup as traffic shifted to the mesh
gateway for termination.
This PR sends the mesh gateway SpiffeID down all the time so the clients
always expect a switch.
For L4/tcp exported services the mesh gateways will not be terminating
TLS. A caller in one peer will be directly establishing TLS connections
to the ultimate exported service in the other peer.
The caller will be doing SAN validation using the replicated SpiffeID
values shipped from the exporting side. There are a class of discovery
chain edits that could be done on the exporting side that would cause
the introduction of a new SpiffeID value. In between the time of the
config entry update on the exporting side and the importing side getting
updated peer stream data requests to the exported service would fail due
to SAN validation errors.
This is unacceptable so instead prohibit the exporting peer from making
changes that would break peering in this way.
Because peerings are pairwise, between two tuples of (datacenter,
partition) having any exported reference via a discovery chain that
crosses out of the peered datacenter or partition will ultimately not be
able to work for various reasons. The biggest one is that there is no
way in the ultimate destination to configure an intention that can allow
an external SpiffeID to access a service.
This PR ensures that a user simply cannot do this, so they won't run
into weird situations like this.
Peer replication is intended to be between separate Consul installs and
effectively should be considered "external". This PR moves the peer
stream replication bidirectional RPC endpoint to the external gRPC
server and ensures that things continue to function.
Currently servers exchange information about their WAN serf port
and RPC port with serf tags, so that they all learn of each other's
addressing information. We intend to make larger use of the new
public-facing gRPC port exposed on all of the servers, so this PR
addresses that by passing around the gRPC port via serf tags and
then ensuring the generated consul service in the catalog has
metadata about that new port as well for ease of non-serf-based lookup.
This commit updates the DNS query locality parsing so that the virtual
IP for an imported service can be queried.
Note that:
- Support for parsing a peer in other service discovery queries was not
added.
- Querying another datacenter for a virtual IP is not supported. This
was technically allowed in 1.11 but is being rolled back for 1.13
because it is not a use-case we intended to support. Virtual IPs in
different datacenters are going to collide because they are allocated
sequentially.
These changes are primarily for Consul's UI, where we want to be more
specific about the state a peering is in.
- The "initial" state was renamed to pending, and no longer applies to
peerings being established from a peering token.
- Upon request to establish a peering from a peering token, peerings
will be set as "establishing". This will help distinguish between the
two roles: the cluster that generates the peering token and the
cluster that establishes the peering.
- When marked for deletion, peering state will be set to "deleting".
This way the UI determines the deletion via the state rather than the
"DeletedAt" field.
Co-authored-by: freddygv <freddy@hashicorp.com>
This is the OSS portion of enterprise PR 2157.
It builds on the local blocking query work in #13438 to implement the
proxycfg.IntentionUpstreams interface using server-local data.
Also moves the ACL filtering logic from agent/consul into the acl/filter
package so that it can be reused here.
This is the OSS portion of enterprise PR 2141.
This commit provides a server-local implementation of the `proxycfg.Intentions`
interface that sources data from streaming events.
It adds events for the `service-intentions` config entry type, and then consumes
event streams (via materialized views) for the service's explicit intentions and
any applicable wildcard intentions, merging them into a single list of intentions.
An alternative approach I considered was to consume _all_ intention events (via
`SubjectWildcard`) and filter out the irrelevant ones. This would admittedly
remove some complexity in the `agent/proxycfg-glue` package but at the expense
of considerable overhead from waking potentially many thousands of connect
proxies every time any intention is updated.
This is the OSS portion of enterprise PR 2056.
This commit provides server-local implementations of the proxycfg.ConfigEntry
and proxycfg.ConfigEntryList interfaces, that source data from streaming events.
It makes use of the LocalMaterializer type introduced for peering replication,
adding the necessary support for authorization.
It also adds support for "wildcard" subscriptions (within a topic) to the event
publisher, as this is needed to fetch service-resolvers for all services when
configuring mesh gateways.
Currently, events will be emitted for just the ingress-gateway, service-resolver,
and mesh config entry types, as these are the only entries required by proxycfg
— the events will be emitted on topics named IngressGateway, ServiceResolver,
and MeshConfig topics respectively.
Though these events will only be consumed "locally" for now, they can also be
consumed via the gRPC endpoint (confirmed using grpcurl) so using them from
client agents should be a case of swapping the LocalMaterializer for an
RPCMaterializer.
For initial cluster peering TProxy support we consider all imported services of a partition to be potential upstreams.
We leverage the VirtualIP table because it stores plain service names (e.g. "api", not "api-sidecar-proxy").
When the protocol is http-like, and an intention has a peered source
then the normal RBAC mTLS SAN field check is replaces with a joint combo
of:
mTLS SAN field must be the service's local mesh gateway leaf cert
AND
the first XFCC header (from the MGW) must have a URI field that matches the original intention source
Also:
- Update the regex program limit to be much higher than the teeny
defaults, since the RBAC regex constructions are more complicated now.
- Fix a few stray panics in xds generation.
When traversing an exported peered service, the discovery chain
evaluation at the other side may re-route the request to a variety of
endpoints. Furthermore we intend to terminate mTLS at the mesh gateway
for arriving peered traffic that is http-like (L7), so the caller needs
to know the mesh gateway's SpiffeID in that case as well.
The following new SpiffeID values will be shipped back in the peerstream
replication:
- tcp: all possible SpiffeIDs resulting from the service-resolver
component of the exported discovery chain
- http-like: the SpiffeID of the mesh gateway
Adds fine-grained node.[node] entries to the index table, allowing blocking queries to return fine-grained indexes that prevent them from returning immediately when unrelated nodes/services are updated.
Co-authored-by: kisunji <ckim@hashicorp.com>
We have many indexer functions in Consul which take interface{} and type assert before building the index. We can use generics to get rid of the initial plumbing and pass around functions with better defined signatures. This has two benefits: 1) Less verbosity; 2) Developers can parse the argument types to memdb schemas without having to introspect the function for the type assertion.
Although the metric is defined, there is no code which ever sets its
value - the code in question is genuinely asymmetric - there are 3 types
of object for which registration can be tracked, but only 2 for which
deregistration can be tracked.
The name of the metric as registered with the metrics library to provide
the help string, was incorrect compared with the actual code that sets
the metric value - bring them into sync.
Also, the help message was incorrect. Rather than copy the help message
from telemetry.mdx, which was correct, but felt a bit unnatural in the
way it was worded, update both of them to a new wording.
Having this type live in the agent/consul package makes it difficult to
put anything that relies on token resolution (e.g. the new gRPC services)
in separate packages without introducing import cycles.
For example, if package foo imports agent/consul for the ACLResolveResult
type it means that agent/consul cannot import foo to register its service.
We've previously worked around this by wrapping the ACLResolver to
"downgrade" its return type to an acl.Authorizer - aside from the
added complexity, this also loses the resolved identity information.
In the future, we may want to move the whole ACLResolver into the
acl/resolver package. For now, putting the result type there at least,
fixes the immediate import cycle issues.
This is only configured in xDS when a service with an L7 protocol is
exported.
They also load any relevant trust bundles for the peered services to
eventually use for L7 SPIFFE validation during mTLS termination.
Adds the merge-central-config query param option to the /catalog/node-services/:node-name API,
to get a service definition in the response that is merged with central defaults (proxy-defaults/service-defaults).
Updated the consul connect envoy command to use this option when
retrieving the proxy service details so as to render the bootstrap configuration correctly.
When our peer deletes the peering it is locally marked as terminated.
This termination should kick off deleting all imported data, but should
not delete the peering object itself.
Keeping peerings marked as terminated acts as a signal that the action
took place.
Once a peering is marked for deletion a new leader routine will now
clean up all imported resources and then the peering itself.
A lot of the logic was grabbed from the namespace/partitions deferred
deletions but with a handful of simplifications:
- The rate limiting is not configurable.
- Deleting imported nodes/services/checks is done by deleting nodes with
the Txn API. The services and checks are deleted as a side-effect.
- There is no "round rate limiter" like with namespaces and partitions.
This is because peerings are purely local, and deleting a peering in
the datacenter does not depend on deleting data from other DCs like
with WAN-federated namespaces. All rate limiting is handled by the
Raft rate limiter.
1. Fix a bug where the peering leader routine would not track all active
peerings in the "stored" reconciliation map. This could lead to
tearing down streams where the token was generated, since the
ConnectedStreams() method used for reconciliation returns all streams
and not just the ones initiated by this leader routine.
2. Fix a race where stream contexts were being canceled before
termination messages were being processed by a peer.
Previously the leader routine would tear down streams by canceling
their context right after the termination message was sent. This
context cancelation could be propagated to the server side faster
than the termination message. Now there is a change where the
dialing peer uses CloseSend() to signal when no more messages will
be sent. Eventually the server peer will read an EOF after receiving
and processing the preceding termination message.
Using CloseSend() is actually not enough to address the issue
mentioned, since it doesn't wait for the server peer to finish
processing messages. Because of this now the dialing peer also reads
from the stream until an error signals that there are no more
messages. Receiving an EOF from our peer indicates that they
processed the termination message and have no additional work to do.
Given that the stream is being closed, all the messages received by
Recv are discarded. We only check for errors to avoid importing new
data.
When deleting a peering we do not want to delete the peering and all
imported data in a single operation, since deleting a large amount of
data at once could overload Consul.
Instead we defer deletion of peerings so that:
1. When a peering deletion request is received via gRPC the peering is
marked for deletion by setting the DeletedAt field.
2. A leader routine will monitor for peerings that are marked for
deletion and kick off a throttled deletion of all imported resources
before deleting the peering itself.
This commit mostly addresses point #1 by modifying the peering service
to mark peerings for deletion. Another key change is to add a
PeeringListDeleted state store function which can return all peerings
marked for deletion. This function is what will be watched by the
deferred deletion leader routine.
Previously, imported data would never be deleted. As
nodes/services/checks were registered and deregistered, resources
deleted from the exporting cluster would accumulate in the imported
cluster.
This commit makes updates to replication so that whenever an update is
received for a service name we reconcile what was present in the catalog
against what was received.
This handleUpdateService method can handle both updates and deletions.
When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
Mesh gateways can use hostnames in their tagged addresses (#7999). This is useful
if you were to expose a mesh gateway using a cloud networking load balancer appliance
that gives you a DNS name but no reliable static IPs.
Envoy cannot accept hostnames via EDS and those must be configured using CDS.
There was already logic when configuring gateways in other locations in the code, but
given the illusions in play for peering the downstream of a peered service wasn't aware
that it should be doing that.
Also:
- ensuring that we always try to use wan-like addresses to cross peer boundaries.
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.
This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
* when enterprise meta are wildcard assume it's a service intention
* fix partition and namespace
* move kind outside the loops
* get the kind check outside the loop and add a comment
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* first draft of destinations intention in connect proxy
* remove ServiceDestinationList
* fix failing tests
* fix agent/consul failing tests
* change to filter intentions in the state store instead of adding a field.
* fix failing tests
* fix comment
* fix comments
* store service kind destination and add relevant tests
* changes based on review
* filter on destinations when querying source match
* change state store API to get an IntentionTarget parameter
* add intentions tests
* add destination upstream endpoint
* fix failing test
* fix failing test and a bug with wildcard intentions
* fix failing test
* Apply suggestions from code review
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
* add missing test and clarify doc
* fix style
* gofmt intention.go
* fix merge introduced issue
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* first draft of destinations intention in connect proxy
* remove ServiceDestinationList
* fix failing tests
* fix agent/consul failing tests
* change to filter intentions in the state store instead of adding a field.
* fix failing tests
* fix comment
* fix comments
* store service kind destination and add relevant tests
* changes based on review
* filter on destinations when querying source match
* Apply suggestions from code review
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
* fix style
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* rename destinationType to targetType.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: alex <8968914+acpana@users.noreply.github.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
Mesh gateways will now enable tcp connections with SNI names including peering information so that those connections may be proxied.
Note: this does not change the callers to use these mesh gateways.
This is the OSS portion of enterprise PR 1994
Rather than directly interrogating the agent-local state for HTTP
checks using the `HTTPCheckFetcher` interface, we now rely on the
config snapshot containing the checks.
This reduces the number of changes required to support server xDS
sessions.
It's not clear why the fetching approach was introduced in
931d167ebb2300839b218d08871f22323c60175d.
malizz