open-consul/agent/consul/client_test.go

756 lines
17 KiB
Go
Raw Normal View History

2013-12-19 22:54:32 +00:00
package consul
import (
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
"bytes"
2014-01-01 00:46:56 +00:00
"net"
2013-12-19 22:54:32 +00:00
"os"
"sync"
2013-12-19 22:54:32 +00:00
"testing"
"time"
2014-08-27 02:26:55 +00:00
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/sdk/freeport"
"github.com/hashicorp/consul/sdk/testutil"
"github.com/hashicorp/consul/sdk/testutil/retry"
"github.com/hashicorp/consul/testrpc"
"github.com/hashicorp/consul/tlsutil"
"github.com/hashicorp/go-hclog"
msgpackrpc "github.com/hashicorp/net-rpc-msgpackrpc"
2014-08-27 02:26:55 +00:00
"github.com/hashicorp/serf/serf"
2018-06-11 20:23:51 +00:00
"github.com/stretchr/testify/require"
"golang.org/x/time/rate"
2013-12-19 22:54:32 +00:00
)
func testClientConfig(t *testing.T) (string, *Config) {
dir := testutil.TempDir(t, "consul")
2013-12-19 22:54:32 +00:00
config := DefaultConfig()
ports := freeport.MustTake(2)
returnPortsFn := func() {
// The method of plumbing this into the client shutdown hook doesn't
// cover all exit points, so we insulate this against multiple
// invocations and then it's safe to call it a bunch of times.
freeport.Return(ports)
config.NotifyShutdown = nil // self-erasing
}
config.NotifyShutdown = returnPortsFn
2014-04-07 21:36:32 +00:00
config.Datacenter = "dc1"
2013-12-19 22:54:32 +00:00
config.DataDir = dir
config.NodeName = uniqueNodeName(t.Name())
2014-01-01 00:46:56 +00:00
config.RPCAddr = &net.TCPAddr{
IP: []byte{127, 0, 0, 1},
Port: ports[0],
2014-01-01 00:46:56 +00:00
}
2013-12-19 22:54:32 +00:00
config.SerfLANConfig.MemberlistConfig.BindAddr = "127.0.0.1"
config.SerfLANConfig.MemberlistConfig.BindPort = ports[1]
2013-12-19 22:54:32 +00:00
config.SerfLANConfig.MemberlistConfig.ProbeTimeout = 200 * time.Millisecond
config.SerfLANConfig.MemberlistConfig.ProbeInterval = time.Second
config.SerfLANConfig.MemberlistConfig.GossipInterval = 100 * time.Millisecond
config.LogOutput = testutil.TestWriter(t)
2013-12-19 22:54:32 +00:00
2014-04-07 21:36:32 +00:00
return dir, config
}
func testClient(t *testing.T) (string, *Client) {
return testClientWithConfig(t, func(c *Config) {
c.Datacenter = "dc1"
c.NodeName = uniqueNodeName(t.Name())
})
2014-04-07 21:36:32 +00:00
}
func testClientDC(t *testing.T, dc string) (string, *Client) {
return testClientWithConfig(t, func(c *Config) {
c.Datacenter = dc
c.NodeName = uniqueNodeName(t.Name())
})
2013-12-19 22:54:32 +00:00
}
func testClientWithConfigWithErr(t *testing.T, cb func(c *Config)) (string, *Client, error) {
dir, config := testClientConfig(t)
if cb != nil {
cb(config)
}
w := config.LogOutput
if w == nil {
w = os.Stderr
}
logger := hclog.NewInterceptLogger(&hclog.LoggerOptions{
Name: config.NodeName,
Level: hclog.Debug,
Output: w,
})
tlsConf, err := tlsutil.NewConfigurator(config.ToTLSUtilConfig(), logger)
if err != nil {
t.Fatalf("err: %v", err)
}
client, err := NewClientLogger(config, logger, tlsConf)
2014-08-27 02:26:55 +00:00
if err != nil {
config.NotifyShutdown()
}
return dir, client, err
}
func testClientWithConfig(t *testing.T, cb func(c *Config)) (string, *Client) {
dir, client, err := testClientWithConfigWithErr(t, cb)
if err != nil {
2014-08-27 02:26:55 +00:00
t.Fatalf("err: %v", err)
}
return dir, client
}
2013-12-19 22:54:32 +00:00
func TestClient_StartStop(t *testing.T) {
t.Parallel()
2013-12-19 22:54:32 +00:00
dir, client := testClient(t)
defer os.RemoveAll(dir)
if err := client.Shutdown(); err != nil {
t.Fatalf("err: %v", err)
}
}
2013-12-19 22:56:38 +00:00
func TestClient_JoinLAN(t *testing.T) {
t.Parallel()
2013-12-19 22:56:38 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
2019-02-22 20:40:59 +00:00
testrpc.WaitForLeader(t, s1.RPC, "dc1")
2013-12-19 22:56:38 +00:00
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2019-02-22 20:40:59 +00:00
testrpc.WaitForTestAgent(t, c1.RPC, "dc1")
retry.Run(t, func(r *retry.R) {
if got, want := c1.routers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
2013-12-19 22:56:38 +00:00
}
2013-12-19 23:08:55 +00:00
func TestClient_LANReap(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
dir2, c1 := testClientWithConfig(t, func(c *Config) {
c.Datacenter = "dc1"
c.SerfFloodInterval = 100 * time.Millisecond
c.SerfLANConfig.ReconnectTimeout = 250 * time.Millisecond
c.SerfLANConfig.TombstoneTimeout = 250 * time.Millisecond
c.SerfLANConfig.ReapInterval = 500 * time.Millisecond
})
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
joinLAN(t, c1, s1)
testrpc.WaitForLeader(t, c1.RPC, "dc1")
retry.Run(t, func(r *retry.R) {
require.Len(r, s1.LANMembers(), 2)
require.Len(r, c1.LANMembers(), 2)
})
// Check the router has both
retry.Run(t, func(r *retry.R) {
server := c1.routers.FindServer()
require.NotNil(t, server)
require.Equal(t, s1.config.NodeName, server.Name)
})
// shutdown the second dc
s1.Shutdown()
retry.Run(t, func(r *retry.R) {
require.Len(r, c1.LANMembers(), 1)
server := c1.routers.FindServer()
require.Nil(t, server)
})
}
func TestClient_JoinLAN_Invalid(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClientDC(t, "other")
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
if _, err := c1.JoinLAN([]string{joinAddrLAN(s1)}); err == nil {
t.Fatal("should error")
}
time.Sleep(50 * time.Millisecond)
if len(s1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
if len(c1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
}
func TestClient_JoinWAN_Invalid(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClientDC(t, "dc2")
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
if _, err := c1.JoinLAN([]string{joinAddrWAN(s1)}); err == nil {
t.Fatal("should error")
}
time.Sleep(50 * time.Millisecond)
if len(s1.WANMembers()) != 1 {
t.Fatalf("should not join")
}
if len(c1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
}
2013-12-19 23:08:55 +00:00
func TestClient_RPC(t *testing.T) {
t.Parallel()
2013-12-19 23:08:55 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try an RPC
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != structs.ErrNoServers {
t.Fatalf("err: %v", err)
}
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2013-12-19 23:08:55 +00:00
// Check the members
if len(s1.LANMembers()) != 2 {
t.Fatalf("bad len")
}
if len(c1.LANMembers()) != 2 {
t.Fatalf("bad len")
}
// RPC should succeed
retry.Run(t, func(r *retry.R) {
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
2013-12-19 23:08:55 +00:00
}
2014-04-07 21:36:32 +00:00
type leaderFailer struct {
totalCalls int
onceCalls int
}
func (l *leaderFailer) Always(args struct{}, reply *struct{}) error {
l.totalCalls++
return structs.ErrNoLeader
}
func (l *leaderFailer) Once(args struct{}, reply *struct{}) error {
l.totalCalls++
l.onceCalls++
switch {
case l.onceCalls == 1:
return structs.ErrNoLeader
default:
return nil
}
}
func TestClient_RPC_Retry(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClientWithConfig(t, func(c *Config) {
c.Datacenter = "dc1"
c.NodeName = uniqueNodeName(t.Name())
c.RPCHoldTimeout = 2 * time.Second
})
defer os.RemoveAll(dir2)
defer c1.Shutdown()
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatalf("err: %v", err)
}
})
failer := &leaderFailer{}
if err := s1.RegisterEndpoint("Fail", failer); err != nil {
t.Fatalf("err: %v", err)
}
var out struct{}
if err := c1.RPC("Fail.Always", struct{}{}, &out); !structs.IsErrNoLeader(err) {
t.Fatalf("err: %v", err)
}
if got, want := failer.totalCalls, 2; got < want {
t.Fatalf("got %d want >= %d", got, want)
}
if err := c1.RPC("Fail.Once", struct{}{}, &out); err != nil {
t.Fatalf("err: %v", err)
}
if got, want := failer.onceCalls, 2; got < want {
t.Fatalf("got %d want >= %d", got, want)
}
if got, want := failer.totalCalls, 4; got < want {
t.Fatalf("got %d want >= %d", got, want)
}
}
func TestClient_RPC_Pool(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2016-10-25 21:58:45 +00:00
// Wait for both agents to finish joining
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
// Blast out a bunch of RPC requests at the same time to try to get
// contention opening new connections.
var wg sync.WaitGroup
for i := 0; i < 150; i++ {
wg.Add(1)
go func() {
defer wg.Done()
var out struct{}
retry.Run(t, func(r *retry.R) {
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
}()
}
wg.Wait()
}
func TestClient_RPC_ConsulServerPing(t *testing.T) {
t.Parallel()
var servers []*Server
const numServers = 5
for n := 0; n < numServers; n++ {
bootstrap := n == 0
dir, s := testServerDCBootstrap(t, "dc1", bootstrap)
defer os.RemoveAll(dir)
defer s.Shutdown()
servers = append(servers, s)
}
const numClients = 1
clientDir, c := testClient(t)
defer os.RemoveAll(clientDir)
defer c.Shutdown()
// Join all servers.
for _, s := range servers {
2017-05-05 10:29:49 +00:00
joinLAN(t, c, s)
}
for _, s := range servers {
retry.Run(t, func(r *retry.R) { r.Check(wantPeers(s, numServers)) })
}
// Sleep to allow Serf to sync, shuffle, and let the shuffle complete
c.routers.ResetRebalanceTimer()
time.Sleep(time.Second)
if len(c.LANMembers()) != numServers+numClients {
t.Errorf("bad len: %d", len(c.LANMembers()))
}
for _, s := range servers {
if len(s.LANMembers()) != numServers+numClients {
t.Errorf("bad len: %d", len(s.LANMembers()))
}
}
// Ping each server in the list
var pingCount int
for range servers {
time.Sleep(200 * time.Millisecond)
s := c.routers.FindServer()
ok, err := c.connPool.Ping(s.Datacenter, s.ShortName, s.Addr)
if !ok {
t.Errorf("Unable to ping server %v: %s", s.String(), err)
}
2017-04-20 19:00:03 +00:00
pingCount++
// Artificially fail the server in order to rotate the server
// list
c.routers.NotifyFailedServer(s)
}
if pingCount != numServers {
t.Errorf("bad len: %d/%d", pingCount, numServers)
}
}
2014-04-07 21:36:32 +00:00
func TestClient_RPC_TLS(t *testing.T) {
t.Parallel()
dir1, conf1 := testServerConfig(t)
2014-04-07 21:36:32 +00:00
conf1.VerifyIncoming = true
conf1.VerifyOutgoing = true
configureTLS(conf1)
s1, err := NewServer(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, conf2 := testClientConfig(t)
defer conf2.NotifyShutdown()
2014-04-07 21:36:32 +00:00
conf2.VerifyOutgoing = true
configureTLS(conf2)
c1, err := NewClient(conf2)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try an RPC
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != structs.ErrNoServers {
t.Fatalf("err: %v", err)
}
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2014-04-07 21:36:32 +00:00
// Wait for joins to finish/RPC to succeed
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
2014-04-07 21:36:32 +00:00
}
2014-08-27 02:26:55 +00:00
func TestClient_RPC_RateLimit(t *testing.T) {
t.Parallel()
dir1, conf1 := testServerConfig(t)
s1, err := NewServer(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir1)
defer s1.Shutdown()
testrpc.WaitForLeader(t, s1.RPC, "dc1")
dir2, conf2 := testClientConfig(t)
defer conf2.NotifyShutdown()
conf2.RPCRate = 2
conf2.RPCMaxBurst = 2
c1, err := NewClient(conf2)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != structs.ErrRPCRateExceeded {
r.Fatalf("err: %v", err)
}
})
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
func TestClient_SnapshotRPC(t *testing.T) {
t.Parallel()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
testrpc.WaitForLeader(t, c1.RPC, "dc1")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Wait until we've got a healthy server.
retry.Run(t, func(r *retry.R) {
if got, want := c1.routers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
})
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Take a snapshot.
var snap bytes.Buffer
args := structs.SnapshotRequest{
Datacenter: "dc1",
Op: structs.SnapshotSave,
}
if err := c1.SnapshotRPC(&args, bytes.NewReader([]byte("")), &snap, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Restore a snapshot.
args.Op = structs.SnapshotRestore
if err := c1.SnapshotRPC(&args, &snap, nil, nil); err != nil {
t.Fatalf("err: %v", err)
}
}
func TestClient_SnapshotRPC_RateLimit(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
testrpc.WaitForLeader(t, s1.RPC, "dc1")
dir2, conf1 := testClientConfig(t)
defer conf1.NotifyShutdown()
conf1.RPCRate = 2
conf1.RPCMaxBurst = 2
c1, err := NewClient(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
if got, want := c1.routers.NumServers(), 1; got != want {
r.Fatalf("got %d servers want %d", got, want)
}
})
retry.Run(t, func(r *retry.R) {
var snap bytes.Buffer
args := structs.SnapshotRequest{
Datacenter: "dc1",
Op: structs.SnapshotSave,
}
if err := c1.SnapshotRPC(&args, bytes.NewReader([]byte("")), &snap, nil); err != structs.ErrRPCRateExceeded {
r.Fatalf("err: %v", err)
}
})
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
func TestClient_SnapshotRPC_TLS(t *testing.T) {
t.Parallel()
dir1, conf1 := testServerConfig(t)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
conf1.VerifyIncoming = true
conf1.VerifyOutgoing = true
configureTLS(conf1)
s1, err := NewServer(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, conf2 := testClientConfig(t)
defer conf2.NotifyShutdown()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
conf2.VerifyOutgoing = true
configureTLS(conf2)
c1, err := NewClient(conf2)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client members want %d", got, want)
}
// Wait until we've got a healthy server.
if got, want := c1.routers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
})
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Take a snapshot.
var snap bytes.Buffer
args := structs.SnapshotRequest{
Datacenter: "dc1",
Op: structs.SnapshotSave,
}
if err := c1.SnapshotRPC(&args, bytes.NewReader([]byte("")), &snap, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Restore a snapshot.
args.Op = structs.SnapshotRestore
if err := c1.SnapshotRPC(&args, &snap, nil, nil); err != nil {
t.Fatalf("err: %v", err)
}
}
2014-08-27 02:26:55 +00:00
func TestClientServer_UserEvent(t *testing.T) {
t.Parallel()
2014-08-27 02:26:55 +00:00
clientOut := make(chan serf.UserEvent, 2)
dir1, c1 := testClientWithConfig(t, func(conf *Config) {
conf.UserEventHandler = func(e serf.UserEvent) {
clientOut <- e
}
})
defer os.RemoveAll(dir1)
defer c1.Shutdown()
serverOut := make(chan serf.UserEvent, 2)
dir2, s1 := testServerWithConfig(t, func(conf *Config) {
conf.UserEventHandler = func(e serf.UserEvent) {
serverOut <- e
}
})
defer os.RemoveAll(dir2)
defer s1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2014-08-27 02:26:55 +00:00
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
2014-08-27 02:26:55 +00:00
// Check the members
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
2014-08-27 02:26:55 +00:00
// Fire the user event
codec := rpcClient(t, s1)
event := structs.EventFireRequest{
Name: "foo",
Datacenter: "dc1",
Payload: []byte("baz"),
}
if err := msgpackrpc.CallWithCodec(codec, "Internal.EventFire", &event, nil); err != nil {
2014-08-27 02:26:55 +00:00
t.Fatalf("err: %v", err)
}
// Wait for all the events
var clientReceived, serverReceived bool
for i := 0; i < 2; i++ {
2014-08-27 02:26:55 +00:00
select {
case e := <-clientOut:
switch e.Name {
case "foo":
clientReceived = true
2014-08-27 02:26:55 +00:00
default:
t.Fatalf("Bad: %#v", e)
}
case e := <-serverOut:
switch e.Name {
case "foo":
serverReceived = true
2014-08-27 02:26:55 +00:00
default:
t.Fatalf("Bad: %#v", e)
}
case <-time.After(10 * time.Second):
t.Fatalf("timeout")
}
}
if !serverReceived || !clientReceived {
2014-08-27 02:26:55 +00:00
t.Fatalf("missing events")
}
}
2018-06-11 20:23:51 +00:00
func TestClient_Reload(t *testing.T) {
t.Parallel()
dir1, c := testClientWithConfig(t, func(c *Config) {
c.RPCRate = 500
c.RPCMaxBurst = 5000
})
defer os.RemoveAll(dir1)
defer c.Shutdown()
limiter := c.rpcLimiter.Load().(*rate.Limiter)
require.Equal(t, rate.Limit(500), limiter.Limit())
require.Equal(t, 5000, limiter.Burst())
c.config.RPCRate = 1000
c.config.RPCMaxBurst = 10000
require.NoError(t, c.ReloadConfig(c.config))
limiter = c.rpcLimiter.Load().(*rate.Limiter)
require.Equal(t, rate.Limit(1000), limiter.Limit())
require.Equal(t, 10000, limiter.Burst())
}