open-consul/agent/consul/client_test.go

535 lines
12 KiB
Go
Raw Normal View History

2013-12-19 22:54:32 +00:00
package consul
import (
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
"bytes"
2014-01-01 00:46:56 +00:00
"net"
2013-12-19 22:54:32 +00:00
"os"
"sync"
2013-12-19 22:54:32 +00:00
"testing"
"time"
2014-08-27 02:26:55 +00:00
pkg refactor command/agent/* -> agent/* command/consul/* -> agent/consul/* command/agent/command{,_test}.go -> command/agent{,_test}.go command/base/command.go -> command/base.go command/base/* -> command/* commands.go -> command/commands.go The script which did the refactor is: ( cd $GOPATH/src/github.com/hashicorp/consul git mv command/agent/command.go command/agent.go git mv command/agent/command_test.go command/agent_test.go git mv command/agent/flag_slice_value{,_test}.go command/ git mv command/agent . git mv command/base/command.go command/base.go git mv command/base/config_util{,_test}.go command/ git mv commands.go command/ git mv consul agent rmdir command/base/ gsed -i -e 's|package agent|package command|' command/agent{,_test}.go gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go gsed -i -e 's|package main|package command|' command/commands.go gsed -i -e 's|base.Command|BaseCommand|' command/commands.go gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go gsed -i -e 's|base\.||' command/commands.go gsed -i -e 's|command\.||' command/commands.go gsed -i -e 's|command|c|' main.go gsed -i -e 's|range Commands|range command.Commands|' main.go gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go gsed -i -e 's|base.Command|BaseCommand|' command/*.go gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go gsed -i -e 's|base\.||' command/*_test.go gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go # fix imports f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f goimports -w $f f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f goimports -w $f goimports -w command/*.go main.go )
2017-06-09 22:28:28 +00:00
"github.com/hashicorp/consul/agent/consul/structs"
"github.com/hashicorp/consul/testrpc"
"github.com/hashicorp/consul/testutil"
"github.com/hashicorp/consul/testutil/retry"
"github.com/hashicorp/net-rpc-msgpackrpc"
2014-08-27 02:26:55 +00:00
"github.com/hashicorp/serf/serf"
2013-12-19 22:54:32 +00:00
)
func testClientConfig(t *testing.T) (string, *Config) {
dir := testutil.TempDir(t, "consul")
2013-12-19 22:54:32 +00:00
config := DefaultConfig()
2014-04-07 21:36:32 +00:00
config.Datacenter = "dc1"
2013-12-19 22:54:32 +00:00
config.DataDir = dir
config.NodeName = uniqueNodeName(t.Name())
2014-01-01 00:46:56 +00:00
config.RPCAddr = &net.TCPAddr{
IP: []byte{127, 0, 0, 1},
Port: getPort(),
2014-01-01 00:46:56 +00:00
}
2013-12-19 22:54:32 +00:00
config.SerfLANConfig.MemberlistConfig.BindAddr = "127.0.0.1"
config.SerfLANConfig.MemberlistConfig.BindPort = getPort()
2013-12-19 22:54:32 +00:00
config.SerfLANConfig.MemberlistConfig.ProbeTimeout = 200 * time.Millisecond
config.SerfLANConfig.MemberlistConfig.ProbeInterval = time.Second
config.SerfLANConfig.MemberlistConfig.GossipInterval = 100 * time.Millisecond
2014-04-07 21:36:32 +00:00
return dir, config
}
func testClient(t *testing.T) (string, *Client) {
return testClientWithConfig(t, func(c *Config) {
c.Datacenter = "dc1"
c.NodeName = uniqueNodeName(t.Name())
})
2014-04-07 21:36:32 +00:00
}
func testClientDC(t *testing.T, dc string) (string, *Client) {
return testClientWithConfig(t, func(c *Config) {
c.Datacenter = dc
c.NodeName = uniqueNodeName(t.Name())
})
2013-12-19 22:54:32 +00:00
}
2014-08-27 02:26:55 +00:00
func testClientWithConfig(t *testing.T, cb func(c *Config)) (string, *Client) {
dir, config := testClientConfig(t)
if cb != nil {
cb(config)
}
2014-08-27 02:26:55 +00:00
client, err := NewClient(config)
if err != nil {
t.Fatalf("err: %v", err)
}
return dir, client
}
2013-12-19 22:54:32 +00:00
func TestClient_StartStop(t *testing.T) {
t.Parallel()
2013-12-19 22:54:32 +00:00
dir, client := testClient(t)
defer os.RemoveAll(dir)
if err := client.Shutdown(); err != nil {
t.Fatalf("err: %v", err)
}
}
2013-12-19 22:56:38 +00:00
func TestClient_JoinLAN(t *testing.T) {
t.Parallel()
2013-12-19 22:56:38 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
if got, want := c1.servers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
2013-12-19 22:56:38 +00:00
}
2013-12-19 23:08:55 +00:00
func TestClient_JoinLAN_Invalid(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClientDC(t, "other")
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
if _, err := c1.JoinLAN([]string{joinAddrLAN(s1)}); err == nil {
t.Fatal("should error")
}
time.Sleep(50 * time.Millisecond)
if len(s1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
if len(c1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
}
func TestClient_JoinWAN_Invalid(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClientDC(t, "dc2")
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
if _, err := c1.JoinLAN([]string{joinAddrWAN(s1)}); err == nil {
t.Fatal("should error")
}
time.Sleep(50 * time.Millisecond)
if len(s1.WANMembers()) != 1 {
t.Fatalf("should not join")
}
if len(c1.LANMembers()) != 1 {
t.Fatalf("should not join")
}
}
2013-12-19 23:08:55 +00:00
func TestClient_RPC(t *testing.T) {
t.Parallel()
2013-12-19 23:08:55 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try an RPC
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != structs.ErrNoServers {
t.Fatalf("err: %v", err)
}
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2013-12-19 23:08:55 +00:00
// Check the members
if len(s1.LANMembers()) != 2 {
t.Fatalf("bad len")
}
if len(c1.LANMembers()) != 2 {
t.Fatalf("bad len")
}
// RPC should succeed
retry.Run(t, func(r *retry.R) {
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
2013-12-19 23:08:55 +00:00
}
2014-04-07 21:36:32 +00:00
func TestClient_RPC_Pool(t *testing.T) {
t.Parallel()
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2016-10-25 21:58:45 +00:00
// Wait for both agents to finish joining
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
// Blast out a bunch of RPC requests at the same time to try to get
// contention opening new connections.
var wg sync.WaitGroup
for i := 0; i < 150; i++ {
wg.Add(1)
go func() {
defer wg.Done()
var out struct{}
retry.Run(t, func(r *retry.R) {
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
}()
}
wg.Wait()
}
func TestClient_RPC_ConsulServerPing(t *testing.T) {
t.Parallel()
var servers []*Server
var serverDirs []string
const numServers = 5
for n := 0; n < numServers; n++ {
bootstrap := n == 0
dir, s := testServerDCBootstrap(t, "dc1", bootstrap)
defer os.RemoveAll(dir)
defer s.Shutdown()
servers = append(servers, s)
serverDirs = append(serverDirs, dir)
}
const numClients = 1
clientDir, c := testClient(t)
defer os.RemoveAll(clientDir)
defer c.Shutdown()
// Join all servers.
for _, s := range servers {
2017-05-05 10:29:49 +00:00
joinLAN(t, c, s)
}
for _, s := range servers {
retry.Run(t, func(r *retry.R) { r.Check(wantPeers(s, numServers)) })
}
// Sleep to allow Serf to sync, shuffle, and let the shuffle complete
c.servers.ResetRebalanceTimer()
time.Sleep(time.Second)
if len(c.LANMembers()) != numServers+numClients {
t.Errorf("bad len: %d", len(c.LANMembers()))
}
for _, s := range servers {
if len(s.LANMembers()) != numServers+numClients {
t.Errorf("bad len: %d", len(s.LANMembers()))
}
}
// Ping each server in the list
var pingCount int
for range servers {
time.Sleep(200 * time.Millisecond)
s := c.servers.FindServer()
ok, err := c.connPool.Ping(s.Datacenter, s.Addr, s.Version, s.UseTLS)
if !ok {
t.Errorf("Unable to ping server %v: %s", s.String(), err)
}
2017-04-20 19:00:03 +00:00
pingCount++
// Artificially fail the server in order to rotate the server
// list
c.servers.NotifyFailedServer(s)
}
if pingCount != numServers {
t.Errorf("bad len: %d/%d", pingCount, numServers)
}
}
2014-04-07 21:36:32 +00:00
func TestClient_RPC_TLS(t *testing.T) {
t.Parallel()
dir1, conf1 := testServerConfig(t)
2014-04-07 21:36:32 +00:00
conf1.VerifyIncoming = true
conf1.VerifyOutgoing = true
configureTLS(conf1)
s1, err := NewServer(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, conf2 := testClientConfig(t)
2014-04-07 21:36:32 +00:00
conf2.VerifyOutgoing = true
configureTLS(conf2)
c1, err := NewClient(conf2)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Try an RPC
var out struct{}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != structs.ErrNoServers {
t.Fatalf("err: %v", err)
}
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2014-04-07 21:36:32 +00:00
// Wait for joins to finish/RPC to succeed
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
if err := c1.RPC("Status.Ping", struct{}{}, &out); err != nil {
r.Fatal("ping failed", err)
}
})
2014-04-07 21:36:32 +00:00
}
2014-08-27 02:26:55 +00:00
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
func TestClient_SnapshotRPC(t *testing.T) {
t.Parallel()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
dir1, s1 := testServer(t)
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, c1 := testClient(t)
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
if len(s1.LANMembers()) != 2 || len(c1.LANMembers()) != 2 {
t.Fatalf("Server has %v of %v expected members; Client has %v of %v expected members.", len(s1.LANMembers()), 2, len(c1.LANMembers()), 2)
}
// Wait until we've got a healthy server.
retry.Run(t, func(r *retry.R) {
if got, want := c1.servers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
})
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Take a snapshot.
var snap bytes.Buffer
args := structs.SnapshotRequest{
Datacenter: "dc1",
Op: structs.SnapshotSave,
}
if err := c1.SnapshotRPC(&args, bytes.NewReader([]byte("")), &snap, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Restore a snapshot.
args.Op = structs.SnapshotRestore
if err := c1.SnapshotRPC(&args, &snap, nil, nil); err != nil {
t.Fatalf("err: %v", err)
}
}
func TestClient_SnapshotRPC_TLS(t *testing.T) {
t.Parallel()
dir1, conf1 := testServerConfig(t)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
conf1.VerifyIncoming = true
conf1.VerifyOutgoing = true
configureTLS(conf1)
s1, err := NewServer(conf1)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir1)
defer s1.Shutdown()
dir2, conf2 := testClientConfig(t)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
conf2.VerifyOutgoing = true
configureTLS(conf2)
c1, err := NewClient(conf2)
if err != nil {
t.Fatalf("err: %v", err)
}
defer os.RemoveAll(dir2)
defer c1.Shutdown()
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Try to join.
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client members want %d", got, want)
}
// Wait until we've got a healthy server.
if got, want := c1.servers.NumServers(), 1; got != want {
2017-05-09 05:31:41 +00:00
r.Fatalf("got %d servers want %d", got, want)
}
})
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Take a snapshot.
var snap bytes.Buffer
args := structs.SnapshotRequest{
Datacenter: "dc1",
Op: structs.SnapshotSave,
}
if err := c1.SnapshotRPC(&args, bytes.NewReader([]byte("")), &snap, nil); err != nil {
t.Fatalf("err: %v", err)
}
// Restore a snapshot.
args.Op = structs.SnapshotRestore
if err := c1.SnapshotRPC(&args, &snap, nil, nil); err != nil {
t.Fatalf("err: %v", err)
}
}
2014-08-27 02:26:55 +00:00
func TestClientServer_UserEvent(t *testing.T) {
t.Parallel()
2014-08-27 02:26:55 +00:00
clientOut := make(chan serf.UserEvent, 2)
dir1, c1 := testClientWithConfig(t, func(conf *Config) {
conf.UserEventHandler = func(e serf.UserEvent) {
clientOut <- e
}
})
defer os.RemoveAll(dir1)
defer c1.Shutdown()
serverOut := make(chan serf.UserEvent, 2)
dir2, s1 := testServerWithConfig(t, func(conf *Config) {
conf.UserEventHandler = func(e serf.UserEvent) {
serverOut <- e
}
})
defer os.RemoveAll(dir2)
defer s1.Shutdown()
// Try to join
2017-05-05 10:29:49 +00:00
joinLAN(t, c1, s1)
2014-08-27 02:26:55 +00:00
// Wait for the leader
testrpc.WaitForLeader(t, s1.RPC, "dc1")
2014-08-27 02:26:55 +00:00
// Check the members
retry.Run(t, func(r *retry.R) {
if got, want := len(s1.LANMembers()), 2; got != want {
r.Fatalf("got %d server LAN members want %d", got, want)
}
if got, want := len(c1.LANMembers()), 2; got != want {
r.Fatalf("got %d client LAN members want %d", got, want)
}
})
2014-08-27 02:26:55 +00:00
// Fire the user event
codec := rpcClient(t, s1)
event := structs.EventFireRequest{
Name: "foo",
Datacenter: "dc1",
Payload: []byte("baz"),
}
if err := msgpackrpc.CallWithCodec(codec, "Internal.EventFire", &event, nil); err != nil {
2014-08-27 02:26:55 +00:00
t.Fatalf("err: %v", err)
}
// Wait for all the events
var clientReceived, serverReceived bool
for i := 0; i < 2; i++ {
2014-08-27 02:26:55 +00:00
select {
case e := <-clientOut:
switch e.Name {
case "foo":
clientReceived = true
2014-08-27 02:26:55 +00:00
default:
t.Fatalf("Bad: %#v", e)
}
case e := <-serverOut:
switch e.Name {
case "foo":
serverReceived = true
2014-08-27 02:26:55 +00:00
default:
t.Fatalf("Bad: %#v", e)
}
case <-time.After(10 * time.Second):
t.Fatalf("timeout")
}
}
if !serverReceived || !clientReceived {
2014-08-27 02:26:55 +00:00
t.Fatalf("missing events")
}
}
func TestClient_Encrypted(t *testing.T) {
t.Parallel()
dir1, c1 := testClient(t)
defer os.RemoveAll(dir1)
defer c1.Shutdown()
key := []byte{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}
dir2, c2 := testClientWithConfig(t, func(c *Config) {
c.SerfLANConfig.MemberlistConfig.SecretKey = key
})
defer os.RemoveAll(dir2)
defer c2.Shutdown()
if c1.Encrypted() {
t.Fatalf("should not be encrypted")
}
if !c2.Encrypted() {
t.Fatalf("should be encrypted")
}
}