open-consul/agent/consul/server.go

1159 lines
35 KiB
Go
Raw Normal View History

2013-12-06 23:43:07 +00:00
package consul
import (
"crypto/tls"
"errors"
2013-12-06 23:43:07 +00:00
"fmt"
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
"io"
"io/ioutil"
2013-12-06 23:43:07 +00:00
"log"
2013-12-07 00:35:13 +00:00
"net"
"net/rpc"
2013-12-06 23:43:07 +00:00
"os"
"path/filepath"
"reflect"
"strconv"
2013-12-06 23:43:07 +00:00
"sync"
"sync/atomic"
"time"
2014-08-08 22:32:43 +00:00
"github.com/hashicorp/consul/acl"
2018-05-09 22:12:31 +00:00
ca "github.com/hashicorp/consul/agent/connect/ca"
2017-12-12 00:38:52 +00:00
"github.com/hashicorp/consul/agent/consul/autopilot"
"github.com/hashicorp/consul/agent/consul/fsm"
pkg refactor command/agent/* -> agent/* command/consul/* -> agent/consul/* command/agent/command{,_test}.go -> command/agent{,_test}.go command/base/command.go -> command/base.go command/base/* -> command/* commands.go -> command/commands.go The script which did the refactor is: ( cd $GOPATH/src/github.com/hashicorp/consul git mv command/agent/command.go command/agent.go git mv command/agent/command_test.go command/agent_test.go git mv command/agent/flag_slice_value{,_test}.go command/ git mv command/agent . git mv command/base/command.go command/base.go git mv command/base/config_util{,_test}.go command/ git mv commands.go command/ git mv consul agent rmdir command/base/ gsed -i -e 's|package agent|package command|' command/agent{,_test}.go gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go gsed -i -e 's|package main|package command|' command/commands.go gsed -i -e 's|base.Command|BaseCommand|' command/commands.go gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go gsed -i -e 's|base\.||' command/commands.go gsed -i -e 's|command\.||' command/commands.go gsed -i -e 's|command|c|' main.go gsed -i -e 's|range Commands|range command.Commands|' main.go gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go gsed -i -e 's|base.Command|BaseCommand|' command/*.go gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go gsed -i -e 's|base\.||' command/*_test.go gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go # fix imports f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f goimports -w $f f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go') gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f goimports -w $f goimports -w command/*.go main.go )
2017-06-09 22:28:28 +00:00
"github.com/hashicorp/consul/agent/consul/state"
"github.com/hashicorp/consul/agent/metadata"
"github.com/hashicorp/consul/agent/pool"
"github.com/hashicorp/consul/agent/router"
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/agent/token"
2017-01-18 06:20:11 +00:00
"github.com/hashicorp/consul/lib"
"github.com/hashicorp/consul/sentinel"
"github.com/hashicorp/consul/tlsutil"
"github.com/hashicorp/consul/types"
"github.com/hashicorp/raft"
raftboltdb "github.com/hashicorp/raft-boltdb"
"github.com/hashicorp/serf/serf"
2013-12-06 23:43:07 +00:00
)
// These are the protocol versions that Consul can _understand_. These are
// Consul-level protocol versions, that are used to configure the Serf
// protocol versions.
const (
ProtocolVersionMin uint8 = 2
// Version 3 added support for network coordinates but we kept the
// default protocol version at 2 to ease the transition to this new
// feature. A Consul agent speaking version 2 of the protocol will
// attempt to send its coordinates to a server who understands version
// 3 or greater.
ProtocolVersion2Compatible = 2
ProtocolVersionMax = 3
)
2013-12-06 23:43:07 +00:00
const (
2015-01-30 05:55:11 +00:00
serfLANSnapshot = "serf/local.snapshot"
serfWANSnapshot = "serf/remote.snapshot"
raftState = "raft/"
snapshotsRetained = 2
// serverRPCCache controls how long we keep an idle connection
// open to a server
serverRPCCache = 2 * time.Minute
2015-09-15 12:22:08 +00:00
// serverMaxStreams controls how many idle streams we keep
// open to a server
serverMaxStreams = 64
2014-08-08 22:32:43 +00:00
// raftLogCacheSize is the maximum number of logs to cache in-memory.
2015-09-11 19:24:54 +00:00
// This is used to reduce disk I/O for the recently committed entries.
raftLogCacheSize = 512
// raftRemoveGracePeriod is how long we wait to allow a RemovePeer
// to replicate to gracefully leave the cluster.
raftRemoveGracePeriod = 5 * time.Second
2013-12-06 23:43:07 +00:00
)
var (
ErrWANFederationDisabled = fmt.Errorf("WAN Federation is disabled")
)
2013-12-06 23:43:07 +00:00
// Server is Consul server which manages the service discovery,
// health checking, DC forwarding, Raft, and multiple Serf pools.
type Server struct {
// sentinel is the Sentinel code engine (can be nil).
sentinel sentinel.Evaluator
2016-08-04 00:01:32 +00:00
// aclAuthCache is the authoritative ACL cache.
2014-08-08 22:32:43 +00:00
aclAuthCache *acl.Cache
2015-06-18 23:19:05 +00:00
// aclCache is the non-authoritative ACL cache.
aclCache *aclCache
2014-08-09 00:38:39 +00:00
2017-12-12 00:38:52 +00:00
// autopilot is the Autopilot instance for this server.
autopilot *autopilot.Autopilot
// autopilotWaitGroup is used to block until Autopilot shuts down.
autopilotWaitGroup sync.WaitGroup
// caProvider is the current CA provider in use for Connect. This is
// only non-nil when we are the leader.
2018-05-09 22:12:31 +00:00
caProvider ca.Provider
caProviderLock sync.RWMutex
2014-08-08 22:32:43 +00:00
// Consul configuration
2013-12-06 23:43:07 +00:00
config *Config
// tokens holds ACL tokens initially from the configuration, but can
// be updated at runtime, so should always be used instead of going to
// the configuration directly.
tokens *token.Store
2013-12-09 20:09:57 +00:00
// Connection pool to other consul servers
connPool *pool.ConnPool
2013-12-09 20:09:57 +00:00
// eventChLAN is used to receive events from the
// serf cluster in the datacenter
eventChLAN chan serf.Event
2013-12-06 23:43:07 +00:00
// eventChWAN is used to receive events from the
// serf cluster that spans datacenters
eventChWAN chan serf.Event
2013-12-06 23:43:07 +00:00
// fsm is the state machine used with Raft to provide
// strong consistency.
fsm *fsm.FSM
2013-12-06 23:43:07 +00:00
// Logger uses the provided LogOutput
logger *log.Logger
// The raft instance is used among Consul nodes within the DC to protect
// operations that require strong consistency.
// the state directly.
raft *raft.Raft
raftLayer *RaftLayer
2015-01-30 05:55:11 +00:00
raftStore *raftboltdb.BoltStore
raftTransport *raft.NetworkTransport
2015-11-29 04:40:05 +00:00
raftInmem *raft.InmemStore
2013-12-06 23:43:07 +00:00
2017-07-06 14:09:21 +00:00
// raftNotifyCh is set up by setupRaft() and ensures that we get reliable leader
// transition notifications from the Raft layer.
2017-07-06 14:09:21 +00:00
raftNotifyCh <-chan bool
// reconcileCh is used to pass events from the serf handler
// into the leader manager, so that the strong state can be
// updated
reconcileCh chan serf.Member
// readyForConsistentReads is used to track when the leader server is
// ready to serve consistent reads, after it has applied its initial
// barrier. This is updated atomically.
readyForConsistentReads int32
// leaveCh is used to signal that the server is leaving the cluster
// and trying to shed its RPC traffic onto other Consul servers. This
// is only ever closed.
leaveCh chan struct{}
// router is used to map out Consul servers in the WAN and in Consul
// Enterprise user-defined areas.
router *router.Router
2013-12-12 00:24:34 +00:00
2017-06-25 19:36:03 +00:00
// Listener is used to listen for incoming connections
Listener net.Listener
rpcServer *rpc.Server
2013-12-07 00:35:13 +00:00
// rpcTLS is the TLS config for incoming TLS requests
rpcTLS *tls.Config
// serfLAN is the Serf cluster maintained inside the DC
2013-12-06 23:43:07 +00:00
// which contains all the DC nodes
serfLAN *serf.Serf
2013-12-06 23:43:07 +00:00
// segmentLAN maps segment names to their Serf cluster
segmentLAN map[string]*serf.Serf
// serfWAN is the Serf cluster maintained between DC's
2013-12-06 23:43:07 +00:00
// which SHOULD only consist of Consul servers
serfWAN *serf.Serf
2013-12-06 23:43:07 +00:00
// serverLookup tracks server consuls in the local datacenter.
// Used to do leader forwarding and provide fast lookup by server id and address
serverLookup *ServerLookup
// floodLock controls access to floodCh.
floodLock sync.RWMutex
floodCh []chan struct{}
2017-03-15 19:26:54 +00:00
// sessionTimers track the expiration time of each Session that has
// a TTL. On expiration, a SessionDestroy event will occur, and
2015-09-11 19:24:54 +00:00
// destroy the session via standard session destroy processing
sessionTimers *SessionTimers
// statsFetcher is used by autopilot to check the status of the other
// Consul router.
statsFetcher *StatsFetcher
// reassertLeaderCh is used to signal the leader loop should re-run
// leadership actions after a snapshot restore.
reassertLeaderCh chan chan error
2014-12-11 07:49:44 +00:00
// tombstoneGC is used to track the pending GC invocations
// for the KV tombstones
tombstoneGC *state.TombstoneGC
2014-12-11 07:49:44 +00:00
// aclReplicationStatus (and its associated lock) provide information
// about the health of the ACL replication goroutine.
aclReplicationStatus structs.ACLReplicationStatus
aclReplicationStatusLock sync.RWMutex
2016-08-03 05:04:11 +00:00
// shutdown and the associated members here are used in orchestrating
// a clean shutdown. The shutdownCh is never written to, only closed to
2016-08-04 00:01:32 +00:00
// indicate a shutdown has been initiated.
2013-12-06 23:43:07 +00:00
shutdown bool
shutdownCh chan struct{}
shutdownLock sync.Mutex
// embedded struct to hold all the enterprise specific data
EnterpriseServer
2013-12-06 23:43:07 +00:00
}
func NewServer(config *Config) (*Server, error) {
return NewServerLogger(config, nil, new(token.Store))
}
2013-12-06 23:43:07 +00:00
// NewServer is used to construct a new Consul server from the
// configuration, potentially returning an error
func NewServerLogger(config *Config, logger *log.Logger, tokens *token.Store) (*Server, error) {
2016-08-03 05:04:11 +00:00
// Check the protocol version.
2017-05-03 19:02:01 +00:00
if err := config.CheckProtocolVersion(); err != nil {
return nil, err
}
2016-08-03 05:04:11 +00:00
// Check for a data directory.
2015-11-29 04:40:05 +00:00
if config.DataDir == "" && !config.DevMode {
2013-12-06 23:43:07 +00:00
return nil, fmt.Errorf("Config must provide a DataDir")
}
2016-08-03 05:04:11 +00:00
// Sanity check the ACLs.
2014-08-05 22:20:35 +00:00
if err := config.CheckACL(); err != nil {
return nil, err
}
2016-08-03 05:04:11 +00:00
// Ensure we have a log output and create a logger.
2013-12-06 23:43:07 +00:00
if config.LogOutput == nil {
config.LogOutput = os.Stderr
}
if logger == nil {
logger = log.New(config.LogOutput, "", log.LstdFlags)
}
2013-12-06 23:43:07 +00:00
// Check if TLS is enabled
if config.CAFile != "" || config.CAPath != "" {
config.UseTLS = true
}
2016-08-03 05:04:11 +00:00
// Create the TLS wrapper for outgoing connections.
tlsConf := config.tlsConfig()
2015-05-11 22:15:36 +00:00
tlsWrap, err := tlsConf.OutgoingTLSWrapper()
if err != nil {
return nil, err
}
2016-08-03 05:04:11 +00:00
// Get the incoming TLS config.
incomingTLS, err := tlsConf.IncomingTLSConfig()
if err != nil {
return nil, err
}
2016-08-03 05:04:11 +00:00
// Create the tombstone GC.
gc, err := state.NewTombstoneGC(config.TombstoneTTL, config.TombstoneTTLGranularity)
2014-12-11 07:49:44 +00:00
if err != nil {
return nil, err
}
// Create the shutdown channel - this is closed but never written to.
shutdownCh := make(chan struct{})
connPool := &pool.ConnPool{
SrcAddr: config.RPCSrcAddr,
LogOutput: config.LogOutput,
MaxTime: serverRPCCache,
MaxStreams: serverMaxStreams,
TLSWrapper: tlsWrap,
ForceTLS: config.VerifyOutgoing,
}
2016-08-03 05:04:11 +00:00
// Create server.
2013-12-06 23:43:07 +00:00
s := &Server{
config: config,
tokens: tokens,
connPool: connPool,
eventChLAN: make(chan serf.Event, 256),
eventChWAN: make(chan serf.Event, 256),
logger: logger,
leaveCh: make(chan struct{}),
reconcileCh: make(chan serf.Member, 32),
router: router.NewRouter(logger, config.Datacenter),
rpcServer: rpc.NewServer(),
rpcTLS: incomingTLS,
reassertLeaderCh: make(chan chan error),
segmentLAN: make(map[string]*serf.Serf, len(config.Segments)),
sessionTimers: NewSessionTimers(),
tombstoneGC: gc,
serverLookup: NewServerLookup(),
shutdownCh: shutdownCh,
2013-12-06 23:43:07 +00:00
}
2017-03-21 23:36:44 +00:00
// Initialize enterprise specific server functionality
if err := s.initEnterprise(); err != nil {
s.Shutdown()
return nil, err
}
// Initialize the stats fetcher that autopilot will use.
s.statsFetcher = NewStatsFetcher(logger, s.connPool, s.config.Datacenter)
2016-08-03 05:04:11 +00:00
// Initialize the authoritative ACL cache.
s.sentinel = sentinel.New(logger)
s.aclAuthCache, err = acl.NewCache(aclCacheSize, s.aclLocalFault, s.sentinel)
2014-08-08 22:32:43 +00:00
if err != nil {
s.Shutdown()
2016-08-04 00:01:32 +00:00
return nil, fmt.Errorf("Failed to create authoritative ACL cache: %v", err)
2014-08-08 22:32:43 +00:00
}
2016-08-04 00:01:32 +00:00
// Set up the non-authoritative ACL cache. A nil local function is given
// if ACL replication isn't enabled.
var local acl.FaultFunc
if s.IsACLReplicationEnabled() {
local = s.aclLocalFault
}
if s.aclCache, err = newACLCache(config, logger, s.RPC, local, s.sentinel); err != nil {
2014-08-08 22:32:43 +00:00
s.Shutdown()
2016-08-04 00:01:32 +00:00
return nil, fmt.Errorf("Failed to create non-authoritative ACL cache: %v", err)
2014-08-09 00:38:39 +00:00
}
2016-08-03 05:04:11 +00:00
// Initialize the RPC layer.
if err := s.setupRPC(tlsWrap); err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to start RPC layer: %v", err)
}
// Initialize any extra RPC listeners for segments.
segmentListeners, err := s.setupSegmentRPC()
if err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to start segment RPC layer: %v", err)
}
2016-08-03 05:04:11 +00:00
// Initialize the Raft server.
2013-12-09 23:29:01 +00:00
if err := s.setupRaft(); err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to start Raft: %v", err)
}
// Start enterprise specific functionality
if err := s.startEnterprise(); err != nil {
s.Shutdown()
return nil, err
}
// Serf and dynamic bind ports
//
// The LAN serf cluster announces the port of the WAN serf cluster
// which creates a race when the WAN cluster is supposed to bind to
// a dynamic port (port 0). The current memberlist implementation will
// update the bind port in the configuration after the memberlist is
// created, so we can pull it out from there reliably, even though it's
// a little gross to be reading the updated config.
// Initialize the WAN Serf if enabled
serfBindPortWAN := -1
if config.SerfWANConfig != nil {
serfBindPortWAN = config.SerfWANConfig.MemberlistConfig.BindPort
s.serfWAN, err = s.setupSerf(config.SerfWANConfig, s.eventChWAN, serfWANSnapshot, true, serfBindPortWAN, "", s.Listener)
if err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to start WAN Serf: %v", err)
}
// See big comment above why we are doing this.
if serfBindPortWAN == 0 {
serfBindPortWAN = config.SerfWANConfig.MemberlistConfig.BindPort
if serfBindPortWAN == 0 {
return nil, fmt.Errorf("Failed to get dynamic bind port for WAN Serf")
}
s.logger.Printf("[INFO] agent: Serf WAN TCP bound to port %d", serfBindPortWAN)
}
}
// Initialize the LAN segments before the default LAN Serf so we have
// updated port information to publish there.
2017-09-01 00:56:43 +00:00
if err := s.setupSegments(config, serfBindPortWAN, segmentListeners); err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to setup network segments: %v", err)
}
// Initialize the LAN Serf for the default network segment.
s.serfLAN, err = s.setupSerf(config.SerfLANConfig, s.eventChLAN, serfLANSnapshot, false, serfBindPortWAN, "", s.Listener)
2013-12-06 23:43:07 +00:00
if err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to start LAN Serf: %v", err)
}
go s.lanEventHandler()
// Start the flooders after the LAN event handler is wired up.
s.floodSegments(config)
// Add a "static route" to the WAN Serf and hook it up to Serf events.
if s.serfWAN != nil {
if err := s.router.AddArea(types.AreaWAN, s.serfWAN, s.connPool, s.config.VerifyOutgoing); err != nil {
s.Shutdown()
return nil, fmt.Errorf("Failed to add WAN serf route: %v", err)
}
go router.HandleSerfEvents(s.logger, s.router, types.AreaWAN, s.serfWAN.ShutdownCh(), s.eventChWAN)
2013-12-06 23:43:07 +00:00
// Fire up the LAN <-> WAN join flooder.
portFn := func(s *metadata.Server) (int, bool) {
if s.WanJoinPort > 0 {
return s.WanJoinPort, true
}
return 0, false
2017-03-15 19:26:54 +00:00
}
go s.Flood(nil, portFn, s.serfWAN)
}
2013-12-06 23:43:07 +00:00
// Start monitoring leadership. This must happen after Serf is set up
// since it can fire events when leadership is obtained.
go s.monitorLeadership()
2016-08-03 05:04:11 +00:00
// Start ACL replication.
if s.IsACLReplicationEnabled() {
go s.runACLReplication()
}
// Start listening for RPC requests.
go s.listen(s.Listener)
// Start listeners for any segments with separate RPC listeners.
for _, listener := range segmentListeners {
go s.listen(listener)
}
2014-12-19 00:57:49 +00:00
2016-08-03 05:04:11 +00:00
// Start the metrics handlers.
2014-12-19 00:57:49 +00:00
go s.sessionStats()
2016-08-03 05:04:11 +00:00
// Initialize Autopilot
s.initAutopilot(config)
2013-12-06 23:43:07 +00:00
return s, nil
}
// setupRaft is used to setup and initialize Raft
func (s *Server) setupRaft() error {
// If we have an unclean exit then attempt to close the Raft store.
defer func() {
if s.raft == nil && s.raftStore != nil {
if err := s.raftStore.Close(); err != nil {
s.logger.Printf("[ERR] consul: failed to close Raft store: %v", err)
}
}
}()
// Create the FSM.
2013-12-11 01:00:48 +00:00
var err error
s.fsm, err = fsm.New(s.tombstoneGC, s.config.LogOutput)
2013-12-11 01:00:48 +00:00
if err != nil {
return err
}
var serverAddressProvider raft.ServerAddressProvider = nil
if s.config.RaftConfig.ProtocolVersion >= 3 { //ServerAddressProvider needs server ids to work correctly, which is only supported in protocol version 3 or higher
serverAddressProvider = s.serverLookup
}
// Create a transport layer.
transConfig := &raft.NetworkTransportConfig{
Stream: s.raftLayer,
MaxPool: 3,
Timeout: 10 * time.Second,
ServerAddressProvider: serverAddressProvider,
}
trans := raft.NewNetworkTransportWithConfig(transConfig)
2015-11-29 04:40:05 +00:00
s.raftTransport = trans
// Make sure we set the LogOutput.
s.config.RaftConfig.LogOutput = s.config.LogOutput
s.config.RaftConfig.Logger = s.logger
2017-02-22 20:53:32 +00:00
// Versions of the Raft protocol below 3 require the LocalID to match the network
// address of the transport.
s.config.RaftConfig.LocalID = raft.ServerID(trans.LocalAddr())
2017-02-22 20:53:32 +00:00
if s.config.RaftConfig.ProtocolVersion >= 3 {
s.config.RaftConfig.LocalID = raft.ServerID(s.config.NodeID)
}
// Build an all in-memory setup for dev mode, otherwise prepare a full
// disk-based setup.
2015-11-29 04:40:05 +00:00
var log raft.LogStore
var stable raft.StableStore
var snap raft.SnapshotStore
if s.config.DevMode {
store := raft.NewInmemStore()
s.raftInmem = store
stable = store
log = store
2016-10-31 18:39:47 +00:00
snap = raft.NewInmemSnapshotStore()
2015-11-29 04:40:05 +00:00
} else {
// Create the base raft path.
2015-11-29 04:40:05 +00:00
path := filepath.Join(s.config.DataDir, raftState)
2017-01-18 06:20:11 +00:00
if err := lib.EnsurePath(path, true); err != nil {
2015-11-29 04:40:05 +00:00
return err
}
2013-12-06 23:43:07 +00:00
// Create the backend raft store for logs and stable storage.
2015-11-29 04:40:05 +00:00
store, err := raftboltdb.NewBoltStore(filepath.Join(path, "raft.db"))
if err != nil {
return err
}
s.raftStore = store
stable = store
// Wrap the store in a LogCache to improve performance.
2015-11-29 04:40:05 +00:00
cacheStore, err := raft.NewLogCache(raftLogCacheSize, store)
if err != nil {
return err
}
log = cacheStore
2013-12-06 23:43:07 +00:00
// Create the snapshot store.
2015-11-29 04:40:05 +00:00
snapshots, err := raft.NewFileSnapshotStore(path, snapshotsRetained, s.config.LogOutput)
if err != nil {
return err
}
snap = snapshots
2013-12-06 23:43:07 +00:00
// For an existing cluster being upgraded to the new version of
// Raft, we almost never want to run recovery based on the old
// peers.json file. We create a peers.info file with a helpful
// note about where peers.json went, and use that as a sentinel
// to avoid ingesting the old one that first time (if we have to
// create the peers.info file because it's not there, we also
// blow away any existing peers.json file).
peersFile := filepath.Join(path, "peers.json")
peersInfoFile := filepath.Join(path, "peers.info")
if _, err := os.Stat(peersInfoFile); os.IsNotExist(err) {
if err := ioutil.WriteFile(peersInfoFile, []byte(peersInfoContent), 0755); err != nil {
return fmt.Errorf("failed to write peers.info file: %v", err)
}
// Blow away the peers.json file if present, since the
// peers.info sentinel wasn't there.
if _, err := os.Stat(peersFile); err == nil {
if err := os.Remove(peersFile); err != nil {
return fmt.Errorf("failed to delete peers.json, please delete manually (see peers.info for details): %v", err)
}
s.logger.Printf("[INFO] consul: deleted peers.json file (see peers.info for details)")
}
} else if _, err := os.Stat(peersFile); err == nil {
s.logger.Printf("[INFO] consul: found peers.json file, recovering Raft configuration...")
var configuration raft.Configuration
if s.config.RaftConfig.ProtocolVersion < 3 {
configuration, err = raft.ReadPeersJSON(peersFile)
} else {
configuration, err = raft.ReadConfigJSON(peersFile)
}
if err != nil {
return fmt.Errorf("recovery failed to parse peers.json: %v", err)
}
tmpFsm, err := fsm.New(s.tombstoneGC, s.config.LogOutput)
if err != nil {
return fmt.Errorf("recovery failed to make temp FSM: %v", err)
}
if err := raft.RecoverCluster(s.config.RaftConfig, tmpFsm,
log, stable, snap, trans, configuration); err != nil {
return fmt.Errorf("recovery failed: %v", err)
}
if err := os.Remove(peersFile); err != nil {
return fmt.Errorf("recovery failed to delete peers.json, please delete manually (see peers.info for details): %v", err)
}
s.logger.Printf("[INFO] consul: deleted peers.json file after successful recovery")
}
2015-11-29 04:40:05 +00:00
}
2013-12-06 23:43:07 +00:00
// If we are in bootstrap or dev mode and the state is clean then we can
// bootstrap now.
if s.config.Bootstrap || s.config.DevMode {
hasState, err := raft.HasExistingState(log, stable, snap)
if err != nil {
return err
}
if !hasState {
configuration := raft.Configuration{
Servers: []raft.Server{
raft.Server{
2017-02-22 20:53:32 +00:00
ID: s.config.RaftConfig.LocalID,
Address: trans.LocalAddr(),
},
},
}
if err := raft.BootstrapCluster(s.config.RaftConfig,
log, stable, snap, trans, configuration); err != nil {
return err
}
}
}
// Set up a channel for reliable leader notifications.
2017-07-06 14:09:21 +00:00
raftNotifyCh := make(chan bool, 1)
s.config.RaftConfig.NotifyCh = raftNotifyCh
s.raftNotifyCh = raftNotifyCh
// Setup the Raft store.
s.raft, err = raft.NewRaft(s.config.RaftConfig, s.fsm, log, stable, snap, trans)
2013-12-06 23:43:07 +00:00
if err != nil {
return err
}
return nil
}
// endpointFactory is a function that returns an RPC endpoint bound to the given
// server.
type factory func(s *Server) interface{}
// endpoints is a list of registered RPC endpoint factories.
var endpoints []factory
// registerEndpoint registers a new RPC endpoint factory.
func registerEndpoint(fn factory) {
endpoints = append(endpoints, fn)
}
2013-12-07 00:35:13 +00:00
// setupRPC is used to setup the RPC listener
2015-05-11 22:15:36 +00:00
func (s *Server) setupRPC(tlsWrap tlsutil.DCWrapper) error {
for _, fn := range endpoints {
s.rpcServer.Register(fn(s))
}
2013-12-09 22:49:07 +00:00
ln, err := net.ListenTCP("tcp", s.config.RPCAddr)
2013-12-07 00:35:13 +00:00
if err != nil {
return err
}
2017-06-25 19:36:03 +00:00
s.Listener = ln
if s.config.NotifyListen != nil {
s.config.NotifyListen()
}
// todo(fs): we should probably guard this
if s.config.RPCAdvertise == nil {
s.config.RPCAdvertise = ln.Addr().(*net.TCPAddr)
}
2013-12-31 22:00:25 +00:00
// Verify that we have a usable advertise address
if s.config.RPCAdvertise.IP.IsUnspecified() {
ln.Close()
return fmt.Errorf("RPC advertise address is not advertisable: %v", s.config.RPCAdvertise)
2013-12-31 22:00:25 +00:00
}
2015-05-11 22:15:36 +00:00
// Provide a DC specific wrapper. Raft replication is only
// ever done in the same datacenter, so we can provide it as a constant.
wrapper := tlsutil.SpecificDC(s.config.Datacenter, tlsWrap)
// Define a callback for determining whether to wrap a connection with TLS
tlsFunc := func(address raft.ServerAddress) bool {
if s.config.VerifyOutgoing {
return true
}
2017-08-30 17:31:36 +00:00
server := s.serverLookup.Server(address)
2017-08-30 17:31:36 +00:00
if server == nil {
return false
}
return server.UseTLS
}
s.raftLayer = NewRaftLayer(s.config.RPCSrcAddr, s.config.RPCAdvertise, wrapper, tlsFunc)
2013-12-07 00:35:13 +00:00
return nil
}
2013-12-06 23:43:07 +00:00
// Shutdown is used to shutdown the server
func (s *Server) Shutdown() error {
2014-01-10 19:06:11 +00:00
s.logger.Printf("[INFO] consul: shutting down server")
2013-12-06 23:43:07 +00:00
s.shutdownLock.Lock()
defer s.shutdownLock.Unlock()
if s.shutdown {
return nil
}
s.shutdown = true
close(s.shutdownCh)
if s.serfLAN != nil {
s.serfLAN.Shutdown()
2013-12-06 23:43:07 +00:00
}
if s.serfWAN != nil {
s.serfWAN.Shutdown()
if err := s.router.RemoveArea(types.AreaWAN); err != nil {
s.logger.Printf("[WARN] consul: error removing WAN area: %v", err)
}
2013-12-06 23:43:07 +00:00
}
s.router.Shutdown()
2013-12-06 23:43:07 +00:00
if s.raft != nil {
s.raftTransport.Close()
s.raftLayer.Close()
future := s.raft.Shutdown()
if err := future.Error(); err != nil {
2016-07-29 18:29:59 +00:00
s.logger.Printf("[WARN] consul: error shutting down raft: %s", err)
}
2015-11-29 04:40:05 +00:00
if s.raftStore != nil {
s.raftStore.Close()
}
2013-12-06 23:43:07 +00:00
}
2013-12-07 00:35:13 +00:00
2017-06-25 19:36:03 +00:00
if s.Listener != nil {
s.Listener.Close()
2013-12-07 00:35:13 +00:00
}
2013-12-09 20:09:57 +00:00
// Close the connection pool
s.connPool.Shutdown()
2013-12-06 23:43:07 +00:00
return nil
}
2013-12-07 01:18:09 +00:00
2013-12-09 20:10:27 +00:00
// Leave is used to prepare for a graceful shutdown of the server
func (s *Server) Leave() error {
2014-01-10 19:06:11 +00:00
s.logger.Printf("[INFO] consul: server starting leave")
2013-12-09 20:10:27 +00:00
// Check the number of known peers
numPeers, err := s.numPeers()
if err != nil {
s.logger.Printf("[ERR] consul: failed to check raft peers: %v", err)
return err
}
addr := s.raftTransport.LocalAddr()
// If we are the current leader, and we have any other peers (cluster has multiple
// servers), we should do a RemoveServer/RemovePeer to safely reduce the quorum size.
// If we are not the leader, then we should issue our leave intention and wait to be
// removed for some sane period of time.
isLeader := s.IsLeader()
if isLeader && numPeers > 1 {
2017-12-12 00:38:52 +00:00
minRaftProtocol, err := s.autopilot.MinRaftProtocol()
if err != nil {
return err
}
if minRaftProtocol >= 2 && s.config.RaftConfig.ProtocolVersion >= 3 {
future := s.raft.RemoveServer(raft.ServerID(s.config.NodeID), 0, 0)
if err := future.Error(); err != nil {
s.logger.Printf("[ERR] consul: failed to remove ourself as raft peer: %v", err)
}
} else {
future := s.raft.RemovePeer(addr)
if err := future.Error(); err != nil {
s.logger.Printf("[ERR] consul: failed to remove ourself as raft peer: %v", err)
}
}
}
2013-12-09 20:10:27 +00:00
// Leave the WAN pool
if s.serfWAN != nil {
if err := s.serfWAN.Leave(); err != nil {
2014-01-10 19:06:11 +00:00
s.logger.Printf("[ERR] consul: failed to leave WAN Serf cluster: %v", err)
2013-12-09 20:10:27 +00:00
}
}
// Leave the LAN pool
if s.serfLAN != nil {
if err := s.serfLAN.Leave(); err != nil {
2014-01-10 19:06:11 +00:00
s.logger.Printf("[ERR] consul: failed to leave LAN Serf cluster: %v", err)
2013-12-09 20:10:27 +00:00
}
}
// Start refusing RPCs now that we've left the LAN pool. It's important
// to do this *after* we've left the LAN pool so that clients will know
// to shift onto another server if they perform a retry. We also wake up
// all queries in the RPC retry state.
s.logger.Printf("[INFO] consul: Waiting %s to drain RPC traffic", s.config.LeaveDrainTime)
close(s.leaveCh)
time.Sleep(s.config.LeaveDrainTime)
// If we were not leader, wait to be safely removed from the cluster. We
// must wait to allow the raft replication to take place, otherwise an
// immediate shutdown could cause a loss of quorum.
if !isLeader {
left := false
limit := time.Now().Add(raftRemoveGracePeriod)
for !left && time.Now().Before(limit) {
// Sleep a while before we check.
time.Sleep(50 * time.Millisecond)
// Get the latest configuration.
future := s.raft.GetConfiguration()
if err := future.Error(); err != nil {
s.logger.Printf("[ERR] consul: failed to get raft configuration: %v", err)
break
}
// See if we are no longer included.
left = true
for _, server := range future.Configuration().Servers {
if server.Address == addr {
left = false
break
}
}
}
// TODO (slackpad) With the old Raft library we used to force the
// peers set to empty when a graceful leave occurred. This would
// keep voting spam down if the server was restarted, but it was
// dangerous because the peers was inconsistent with the logs and
// snapshots, so it wasn't really safe in all cases for the server
// to become leader. This is now safe, but the log spam is noisy.
// The next new version of the library will have a "you are not a
// peer stop it" behavior that should address this. We will have
// to evaluate during the RC period if this interim situation is
// not too confusing for operators.
// TODO (slackpad) When we take a later new version of the Raft
// library it won't try to complete replication, so this peer
// may not realize that it has been removed. Need to revisit this
// and the warning here.
if !left {
s.logger.Printf("[WARN] consul: failed to leave raft configuration gracefully, timeout")
}
}
2013-12-09 20:10:27 +00:00
return nil
}
// numPeers is used to check on the number of known peers, including potentially
// the local node. We count only voters, since others can't actually become
// leader, so aren't considered peers.
func (s *Server) numPeers() (int, error) {
future := s.raft.GetConfiguration()
if err := future.Error(); err != nil {
return 0, err
}
return autopilot.NumPeers(future.Configuration()), nil
}
2013-12-07 01:18:09 +00:00
// JoinLAN is used to have Consul join the inner-DC pool
// The target address should be another node inside the DC
// listening on the Serf LAN address
func (s *Server) JoinLAN(addrs []string) (int, error) {
return s.serfLAN.Join(addrs, true)
2013-12-07 01:18:09 +00:00
}
// JoinWAN is used to have Consul join the cross-WAN Consul ring
// The target address should be another node listening on the
// Serf WAN address
func (s *Server) JoinWAN(addrs []string) (int, error) {
if s.serfWAN == nil {
return 0, ErrWANFederationDisabled
}
return s.serfWAN.Join(addrs, true)
2013-12-07 01:18:09 +00:00
}
// LocalMember is used to return the local node
func (s *Server) LocalMember() serf.Member {
return s.serfLAN.LocalMember()
}
// LANMembers is used to return the members of the LAN cluster
func (s *Server) LANMembers() []serf.Member {
return s.serfLAN.Members()
}
// WANMembers is used to return the members of the LAN cluster
func (s *Server) WANMembers() []serf.Member {
if s.serfWAN == nil {
return nil
}
return s.serfWAN.Members()
}
// RemoveFailedNode is used to remove a failed node from the cluster
func (s *Server) RemoveFailedNode(node string) error {
if err := s.serfLAN.RemoveFailedNode(node); err != nil {
return err
}
if s.serfWAN != nil {
if err := s.serfWAN.RemoveFailedNode(node); err != nil {
return err
}
}
return nil
}
// IsLeader checks if this server is the cluster leader
func (s *Server) IsLeader() bool {
return s.raft.State() == raft.Leader
}
// KeyManagerLAN returns the LAN Serf keyring manager
func (s *Server) KeyManagerLAN() *serf.KeyManager {
return s.serfLAN.KeyManager()
}
// KeyManagerWAN returns the WAN Serf keyring manager
func (s *Server) KeyManagerWAN() *serf.KeyManager {
return s.serfWAN.KeyManager()
}
// Encrypted determines if gossip is encrypted
func (s *Server) Encrypted() bool {
LANEncrypted := s.serfLAN.EncryptionEnabled()
if s.serfWAN == nil {
return LANEncrypted
}
return LANEncrypted && s.serfWAN.EncryptionEnabled()
}
// LANSegments returns a map of LAN segments by name
func (s *Server) LANSegments() map[string]*serf.Serf {
segments := make(map[string]*serf.Serf, len(s.segmentLAN)+1)
segments[""] = s.serfLAN
for name, segment := range s.segmentLAN {
segments[name] = segment
}
return segments
}
// inmemCodec is used to do an RPC call without going over a network
type inmemCodec struct {
method string
args interface{}
reply interface{}
err error
}
func (i *inmemCodec) ReadRequestHeader(req *rpc.Request) error {
req.ServiceMethod = i.method
return nil
}
func (i *inmemCodec) ReadRequestBody(args interface{}) error {
sourceValue := reflect.Indirect(reflect.Indirect(reflect.ValueOf(i.args)))
dst := reflect.Indirect(reflect.Indirect(reflect.ValueOf(args)))
dst.Set(sourceValue)
return nil
}
func (i *inmemCodec) WriteResponse(resp *rpc.Response, reply interface{}) error {
if resp.Error != "" {
i.err = errors.New(resp.Error)
return nil
}
sourceValue := reflect.Indirect(reflect.Indirect(reflect.ValueOf(reply)))
dst := reflect.Indirect(reflect.Indirect(reflect.ValueOf(i.reply)))
dst.Set(sourceValue)
return nil
}
func (i *inmemCodec) Close() error {
return nil
}
// RPC is used to make a local RPC call
func (s *Server) RPC(method string, args interface{}, reply interface{}) error {
codec := &inmemCodec{
method: method,
args: args,
reply: reply,
}
if err := s.rpcServer.ServeRequest(codec); err != nil {
return err
}
return codec.err
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// SnapshotRPC dispatches the given snapshot request, reading from the streaming
// input and writing to the streaming output depending on the operation.
func (s *Server) SnapshotRPC(args *structs.SnapshotRequest, in io.Reader, out io.Writer,
replyFn structs.SnapshotReplyFn) error {
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Perform the operation.
var reply structs.SnapshotResponse
snap, err := s.dispatchSnapshotRequest(args, in, &reply)
if err != nil {
return err
}
defer func() {
if err := snap.Close(); err != nil {
s.logger.Printf("[ERR] consul: Failed to close snapshot: %v", err)
}
}()
// Let the caller peek at the reply.
if replyFn != nil {
if err := replyFn(&reply); err != nil {
return nil
}
}
// Stream the snapshot.
if out != nil {
if _, err := io.Copy(out, snap); err != nil {
return fmt.Errorf("failed to stream snapshot: %v", err)
}
}
return nil
}
// RegisterEndpoint is used to substitute an endpoint for testing.
func (s *Server) RegisterEndpoint(name string, handler interface{}) error {
s.logger.Printf("[WARN] consul: endpoint injected; this should only be used for testing")
return s.rpcServer.RegisterName(name, handler)
}
// Stats is used to return statistics for debugging and insight
// for various sub-systems
func (s *Server) Stats() map[string]map[string]string {
toString := func(v uint64) string {
return strconv.FormatUint(v, 10)
}
numKnownDCs := len(s.router.GetDatacenters())
stats := map[string]map[string]string{
"consul": map[string]string{
2014-02-24 02:08:58 +00:00
"server": "true",
"leader": fmt.Sprintf("%v", s.IsLeader()),
"leader_addr": string(s.raft.Leader()),
2014-02-24 02:08:58 +00:00
"bootstrap": fmt.Sprintf("%v", s.config.Bootstrap),
"known_datacenters": toString(uint64(numKnownDCs)),
},
2014-02-24 02:08:58 +00:00
"raft": s.raft.Stats(),
"serf_lan": s.serfLAN.Stats(),
"runtime": runtimeStats(),
}
if s.serfWAN != nil {
stats["serf_wan"] = s.serfWAN.Stats()
}
for outerKey, outerValue := range s.enterpriseStats() {
if _, ok := stats[outerKey]; ok {
for innerKey, innerValue := range outerValue {
stats[outerKey][innerKey] = innerValue
}
} else {
stats[outerKey] = outerValue
}
}
return stats
}
2015-04-15 23:12:45 +00:00
// GetLANCoordinate returns the coordinate of the server in the LAN gossip pool.
func (s *Server) GetLANCoordinate() (lib.CoordinateSet, error) {
lan, err := s.serfLAN.GetCoordinate()
if err != nil {
return nil, err
}
cs := lib.CoordinateSet{"": lan}
for name, segment := range s.segmentLAN {
c, err := segment.GetCoordinate()
if err != nil {
return nil, err
}
cs[name] = c
}
return cs, nil
2015-04-15 23:12:45 +00:00
}
2015-05-08 08:31:34 +00:00
// Atomically sets a readiness state flag when leadership is obtained, to indicate that server is past its barrier write
func (s *Server) setConsistentReadReady() {
atomic.StoreInt32(&s.readyForConsistentReads, 1)
}
// Atomically reset readiness state flag on leadership revoke
func (s *Server) resetConsistentReadReady() {
atomic.StoreInt32(&s.readyForConsistentReads, 0)
}
// Returns true if this server is ready to serve consistent reads
func (s *Server) isReadyForConsistentReads() bool {
2017-06-21 00:43:07 +00:00
return atomic.LoadInt32(&s.readyForConsistentReads) == 1
}
// peersInfoContent is used to help operators understand what happened to the
// peers.json file. This is written to a file called peers.info in the same
// location.
const peersInfoContent = `
As of Consul 0.7.0, the peers.json file is only used for recovery
after an outage. The format of this file depends on what the server has
configured for its Raft protocol version. Please see the agent configuration
page at https://www.consul.io/docs/agent/options.html#_raft_protocol for more
details about this parameter.
For Raft protocol version 2 and earlier, this should be formatted as a JSON
array containing the address and port of each Consul server in the cluster, like
this:
[
"10.1.0.1:8300",
"10.1.0.2:8300",
"10.1.0.3:8300"
]
For Raft protocol version 3 and later, this should be formatted as a JSON
array containing the node ID, address:port, and suffrage information of each
Consul server in the cluster, like this:
[
{
"id": "adf4238a-882b-9ddc-4a9d-5b6758e4159e",
"address": "10.1.0.1:8300",
"non_voter": false
},
{
"id": "8b6dda82-3103-11e7-93ae-92361f002671",
"address": "10.1.0.2:8300",
"non_voter": false
},
{
"id": "97e17742-3103-11e7-93ae-92361f002671",
"address": "10.1.0.3:8300",
"non_voter": false
}
]
The "id" field is the node ID of the server. This can be found in the logs when
the server starts up, or in the "node-id" file inside the server's data
directory.
The "address" field is the address and port of the server.
The "non_voter" field controls whether the server is a non-voter, which is used
in some advanced Autopilot configurations, please see
https://www.consul.io/docs/guides/autopilot.html for more information. If
"non_voter" is omitted it will default to false, which is typical for most
clusters.
Under normal operation, the peers.json file will not be present.
When Consul starts for the first time, it will create this peers.info file and
delete any existing peers.json file so that recovery doesn't occur on the first
startup.
Once this peers.info file is present, any peers.json file will be ingested at
startup, and will set the Raft peer configuration manually to recover from an
outage. It's crucial that all servers in the cluster are shut down before
creating the peers.json file, and that all servers receive the same
configuration. Once the peers.json file is successfully ingested and applied, it
will be deleted.
Please see https://www.consul.io/docs/guides/outage.html for more information.
`