Summary:
Lots of clients have problems with using StackableDB interface. It's nice to have BackupableDB as a layer on top of DB, but not necessary.
This diff exports BackupEngine, which can be used to create backups without forcing clients to use StackableDB interface.
Test Plan: backupable_db_test
Reviewers: dhruba, ljin, swk
Reviewed By: ljin
CC: leveldb, benj
Differential Revision: https://reviews.facebook.net/D15477
Summary: Keep checksum of each backuped file in meta file. When it restores these files, compute their checksum on the fly and compare against what is in the meta file. Fail the restore process if checksum mismatch.
Test Plan: unit test
Reviewers: haobo, igor, sdong, kailiu
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15381
Summary:
Blocks in the transaction log are a fixed size, but the last block in the transaction log file is usually a partial block. When a new record is added after the reader hit the end of the file, a new physical record will be appended to the last block. ReadPhysicalRecord can only read full blocks and assumes that the file position indicator is aligned to the start of a block. If the reader is forced to read further by simply clearing the EOF flag, ReadPhysicalRecord will read a full block starting from somewhere in the middle of a real block, causing it to lose alignment and to have a partial physical record at the end of the read buffer. This will result in length mismatches and checksum failures. When the log file is tailed for replication this will cause the log iterator to become invalid, necessitating the creation of a new iterator which will have to read the log file from scratch.
This diff fixes this issue by reading the remaining portion of the last block we read from. This is done when the reader is forced to read further (UnmarkEOF is called).
Test Plan:
- Added unit tests
- Stress test (with replication). Check dbdir/LOG file for corruptions.
- Test on test tier
Reviewers: emayanke, haobo, dhruba
Reviewed By: haobo
CC: vamsi, sheki, dhruba, kailiu, igor
Differential Revision: https://reviews.facebook.net/D15249
Summary:
@dhruba, I'm not sure where we need to sync the directory. I implemented the function in Env() and added the dir sync just after we close the newly created file in the builder.
Should I also add FsyncDir() to new files that get created by a compaction?
Test Plan: Confirmed that FsyncDir is returning Status::OK()
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14751
Summary: There is no reason to have functions NeedCompaction(), MaxCompactionScore() and MaxCompactionScoreLevel() in VersionSet, since they don't access any data in VersionSet.
Test Plan: make check
Reviewers: kailiu, haobo, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15333
ReduceNumberOfLevels had segmentation fault in WriteSnapshot() since we
didn't change the number of levels in VersionSet (we consider them
immutable from now on). This fixes the problem.
Summary: By removing some includes form options.h and reply on forward declaration, we can more easily reason the dependencies.
Test Plan: make all check
Reviewers: kailiu, haobo, igor, dhruba
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15411
Summary: On a shutdown, freeing memory takes a long time. If we're shutting down, we don't really care about memory leaks. I added a call to Cache that will avoid freeing all objects in cache.
Test Plan:
I created a script to test the speedup and demonstrate how to use the call: https://phabricator.fb.com/P3864368
Clean shutdown took 7.2 seconds, while fast and dirty one took 6.3 seconds. Unfortunately, the speedup is not that big, but should be bigger with bigger block_cache. I have set up the capacity to 80GB, but the script filled up only ~7GB.
Reviewers: dhruba, haobo, MarkCallaghan, xjin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15069
Summary:
A lot of our code implicitly assumes number_levels to be static. ReduceNumberOfLevels() breaks that assumption. For example, after calling ReduceNumberOfLevels(), DBImpl::NumberLevels() will be different from VersionSet::NumberLevels(). This is dangerous. Thankfully, it's not in public headers and is only used from LDB cmd tool. LDB tool is only using it statically, i.e. it never calls it with running DB instance. With this diff, we make it explicitly static. This way, we can assume number_levels to be immutable and not break assumption that lot of our code is relying upon. LDB tool can still use the method.
Also, I removed the method from a separate file since it breaks filename completition. version_se<TAB> now completes to "version_set." instead of "version_set" (without the dot). I don't see a big reason that the function should be in a different file.
Test Plan: reduce_levels_test
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15303
Summary:
MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful.
This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team.
I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet())
Test Plan: `make check` works. I will also do `make valgrind_check` before commit
Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15255
Summary:
Previous we made `make release` also compile shared library. However it takes a long time to complete.
To make our development process more efficient. I added a new make target shared_lib.
User can of course run `make <library_name>` for direct compilation. However the <library_name> changed under certain condition. Thus we need `make shared_lib` to get rid of the memorization from users' side.
Test Plan: make shared_lib
Reviewers: igor, sdong, haobo, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15309
Summary:
Mixing index/filter blocks with data blocks resulted in some known
issues. To make sure in next release our users won't be affected,
we added a new option in BlockBasedTableFactory::TableOption to
conceal this functionality for now.
This patch also introduced a BlockBasedTableReader::OpenOptions,
which avoids the "infinite" growth of parameters in
BlockBasedTableReader::Open().
Test Plan: make check
Reviewers: haobo, sdong, igor, dhruba
Reviewed By: igor
CC: leveldb, tnovak
Differential Revision: https://reviews.facebook.net/D15327
Summary:
It looks like we might have some trouble when building the new release with 4.8, since fbcode is using glibc2.17-fb by default and we are using glibc2.17. It was reported by Benjamin Renard in our internal group.
This diff moves our fbcode build to use glibc2.17-fb by default. I got some linker errors when compiling, complaining that `google::SetUsageMessage()` was undefined. After deleting all offending lines, the compile was successful and everything works.
Test Plan:
Compiled
Ran ./db_bench ./db_stress ./db_repl_stress
Reviewers: kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15405
Summary: Currently, compaction multipliers can overflow and cause unexpected behaviors. In this patch, we detect those overflows and use multiplier 1 for them.
Test Plan: make all check
Reviewers: dhruba, haobo, igor, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15321
Summary: as title
Test Plan:
make all check
What else tests shall I cover?
Reviewers: igor, haobo
CC:
Differential Revision: https://reviews.facebook.net/D15339
Summary:
This diff implements a special type of iterator that doesn't create a snapshot
(can be used to read newly inserted data) and is optimized for doing sequential
reads.
TailingIterator uses current superversion number to determine whether to
invalidate its internal iterators. If the version hasn't changed, it can often
avoid doing expensive seeks over immutable structures (sst files and immutable
memtables).
Test Plan:
* new unit tests
* running LD with this patch
Reviewers: igor, dhruba, haobo, sdong, kailiu
Reviewed By: sdong
CC: leveldb, lovro, march
Differential Revision: https://reviews.facebook.net/D15285
Summary:
For some reason, D15099 caused a big performance regression: https://fburl.com/16059000
After digging a bit, I figured out that the reason was that std::atomic_uint_fast64_t was allocated in an array. When I switched from an array to vector, the QPS returned to the previous level. I'm not sure why this is happening, but this diff seems to fix the performance regression.
Test Plan: I ran the regression script, observed the performance going back to normal
Reviewers: tnovak, kailiu, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15375
Summary:
After we reached a consensus on code format, which follows exactly
Google's coding style, a natural follow-up is to have a style checker
that can handle stuffs beyond format.
Google already has a powerful style checker "cpplint.py" and,
luckily, phabricator already provides the built-in linter for it!
Next time with "arc lint" most style inconsistency will be detected
(but will not be fixed).
Also I copied cpplint.py to linters directory, which is mostly
because we may need the flexibility to make some modifications on
it for our own need.
Test Plan:
ran arc lint table/block_based_table_builder.cc to see the amazing
results.
Reviewers: haobo, sdong, igor, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15369
Summary:
In this diff I made some effort to reduce usage of friending. To do that, I had to expose Compaction::inputs_ through a method inputs(). Not sure if this is a good idea, there is a trade-off. I think it's less confusing than having lots of friends.
I also thought about other friendship relationships, but they are too much tangled at this point. Once you friend two classes, it's very hard to unfriend them :)
Test Plan: make check
Reviewers: haobo, kailiu, sdong, dhruba
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15267
Summary:
This diff does two things:
* Rethinks how we call Recover() with read_only option. Before, we call it with pointer to memtable where we'd like to apply those changes to. This memtable is set in db_impl_readonly.cc and it's actually DBImpl::mem_. Why don't we just apply updates to mem_ right away? It seems more intuitive.
* Changes when we apply updates to manifest. Before, the process is to recover all the logs, flush it to sst files and then do one giant commit that atomically adds all recovered sst files and sets the next log number. This works good enough, but causes some small troubles for my column family approach, since I can't have one VersionEdit apply to more than single column family[1]. The change here is to commit the files recovered from logs right away. Here is the state of the world before the change:
1. Recover log 5, add new sst files to edit
2. Recover log 7, add new sst files to edit
3. Recover log 8, add new sst files to edit
4. Commit all added sst files to manifest and mark log files 5, 7 and 8 as recoverd (via SetLogNumber(9) function)
After the change, we'll do:
1. Recover log 5, commit the new sst files and set log 5 as recovered
2. Recover log 7, commit the new sst files and set log 7 as recovered
3. Recover log 8, commit the new sst files and set log 8 as recovered
The added (small) benefit is that if we fail after (2), the new recovery will only have to recover log 8. In previous case, we'll have to restart the recovery from the beginning. The bigger benefit will be to enable easier integration of multiple column families in Recovery code path.
[1] I'm happy to dicuss this decison, but I believe this is the cleanest way to go. It also makes backward compatibility much easier. We don't have a requirement of adding multiple column families atomically.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15237
Summary:
In my MacOS, the member variables are populated with random numbers after initialization.
This diff fixes it by fill these arrays with 0.
Test Plan: make && ./table_test
Reviewers: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15315
Summary:
This moves the use of versions_ to before the mutex is unlocked
to avoid a possible race.
Task ID: #
Blame Rev:
Test Plan:
make check
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15279
Summary: I'm separating code-cleanup part of https://reviews.facebook.net/D14517. This will make D14517 easier to understand and this diff easier to review.
Test Plan: make check
Reviewers: haobo, kailiu, sdong, dhruba, tnovak
Reviewed By: tnovak
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15099
Summary:
The SIGSEGV was introduced by https://reviews.facebook.net/D15171
I also fixed ExpandWhileOverlapping() which returned the failure by setting it's own stack variable to nullptr (!). This bug is present in 2.6 release, so I guess ExpandWhileOverlapping never fails :)
Test Plan: `make check`. Also MarkCallaghan confirmed it fixed the SIGSEGV he reported.
Reviewers: MarkCallaghan, kailiu, sdong, dhruba, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15261
Summary:
This had a few bugs.
1) bottom and top were reversed. top is for the max value but the callers were passing the max
value to bottom. The result is that the max sleep is used when n >= bottom.
2) one of the callers passed values with type double and these values are frequently between
1.0 and 2.0 so rounding will do some bad things
3) sometimes the function returned 0 when there should be a stall
With this change and one other diff (out for review soon) there are slightly fewer stalls on one workload.
With the fix.
Stalls(secs): 160.166 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 58.495 leveln_slowdown
Stalls(count): 910261 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 54526 leveln_slowdown
Without the fix.
Stalls(secs): 172.227 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 56.538 leveln_slowdown
Stalls(count): 160831 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 52845 leveln_slowdown
Task ID: #
Blame Rev:
Test Plan:
run db_bench for --benchmarks=overwrite with IO-bound database
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15243
Summary:
* make sure when some pre-check fails, the script won't halt immediately.
* change fburl to google's short url.
* Fix a bug in this script: now it checks the uncommitted code only.
Test Plan: Ran the script under differnet environments.
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15231
Summary: The only thing we do with compaction pointers is set them to some values, we never actually read them. I don't know what we used them for, but it doesn't look like we use them anymore.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15225
Summary:
This is a big one. This diff moves all the code related to picking compactions from VersionSet to new class CompactionPicker. Column families' compactions will be completely separate processes, so we need to have multiple CompactionPickers.
To make this easier to review, most of the code change is just copy/paste. There is also a small change not to use VersionSet::current_, but rather to take `Version* version` as a parameter. Most of the other code is exactly the same.
In future diffs, I will also make some improvements to CompactionPickers. I think the most important part will be encapsulating it better. Currently Version, VersionSet, Compaction and CompactionPicker are all friend classes, which makes it harder to change the implementation.
This diff depends on D15171, D15183, D15189 and D15201
Test Plan: `make check`
Reviewers: kailiu, sdong, dhruba, haobo
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15207
Summary:
shared_ptr is slower than unique_ptr (which literally comes with no performance cost compare with raw pointers).
In memtable and memtable rep, we use shared_ptr when we'd actually should use unique_ptr.
According to igor's previous work, we are likely to make quite some performance gain from this diff.
Test Plan: make check
Reviewers: dhruba, igor, sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15213
Summary:
I'm sure we'll all agree that version_set.cc needs simplifying. This diff moves Compaction class to a separate file.
The diff depends on D15171 and D15183
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15189
Summary:
There were some functions in VersionSet that had no reason to be there instead of Version. Moving them to Version will make column families implementation easier.
The functions moved are:
* NumLevelBytes
* LevelSummary
* LevelFileSummary
* MaxNextLevelOverlappingBytes
* AddLiveFiles (previously AddLiveFilesCurrentVersion())
* NeedSlowdownForNumLevel0Files
The diff continues on (and depends on) D15171
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong, emayanke
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15183
Summary:
With column families VersionSet will not have a constant number of levels (each CF can have different options), so we'll need to eliminate call to VersionSet::NumberLevels()
This diff decreases number of callsites, but we're not there yet. It associates number of levels with Version (each version is associated with single CF) instead of VersionSet.
I have also slightly changed how VersionSet keeps track of manifest size.
This diff also modifies constructor of Compaction such that it takes input_version and automatically Ref()s it. Before this was done outside of constructor.
In next diffs I will continue to decrease number of callsites of VersionSet::NumberLevels() and also references to current_
Test Plan: make check
Reviewers: haobo, dhruba, kailiu, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D15171
Summary: To reduce mutex contention caused by DBImpl.NewInternalIterator(), in this function, move all the iteration creation works out of mutex, only leaving object ref and get.
Test Plan:
make all check
will run db_stress for a while too to make sure no problem.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D14589
Conflicts:
db/db_impl.cc
Summary:
When doing CompactRange(), we should first flush the memtable and then calculate max_level_with_files. Also, we want to compact all the levels that have files, including level `max_level_with_files`.
This patch fixed the unit test.
Test Plan: Added a failing unit test and a fix, so it's not failing anymore.
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D14421
Summary:
I will submit a sequence of diffs that are preparing master branch for column families. There are a lot of implicit assumptions in the code that are making column family implementation hard. If I make the change only in column family branch, it will make merging back to master impossible.
Most of the diffs will be simple code refactorings, so I hope we can have fast turnaround time. Feel free to grab me in person to discuss any of them.
This diff removes number of level check from VersionEdit. It is used only when VersionEdit is read, not written, but has to be set when it is written. I believe it is a right thing to make VersionEdit dumb and check consistency on the caller side. This will also make it much easier to implement Column Families, since different column families can have different number of levels.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15159
Summary: When building batch group, don't actually build a new batch since it requires heavy-weight mem copy and malloc. Only store references to the batches and build the batch group without lock held.
Test Plan:
`make check`
I am also planning to run performance tests. The workload that will benefit from this change is readwhilewriting. I will post the results once I have them.
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D15063
Compiling the shared libraries took a long time. Thus to speed up the development speed, it still makes sense to be separated from regular compilation.
Summary:
Added a script that reformat only the affected lines in a given diff.
I planned to make that file as pre-commit hook but looks it's a little bit more difficult than I thought. Since I don't want to spend too much time on this task right now, I eventually added a "make command" to achieve this with a few additional key strokes.
Also make the clang-format solely inherited from Google's style -- there are still debates on some of the style issues, but we can address them later once we reach a consensus.
Test Plan: Did some ugly format change and ran "make format", all affected lines are formatted as expected.
Reviewers: igor, sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15147
Summary: We use SanitizeOptions() to set appropriate values for some options, based on other options. So we should use the sanitized options by default. Luckily it hasn't caused a bug yet, but can result in a bug in the fugture.
Test Plan: make check
Reviewers: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14103
