Summary:
Currently, the code in `SaveValue` that handles `kTypeValue` and
`kTypeBlobIndex` (and more recently, `kTypeWideColumnEntity`) is
mostly shared. This made sense originally; however, by now the
handling of these three value types has diverged significantly. The
patch makes the logic cleaner and also eliminates quite a bit of branching
by giving each value type its own `case` and removing a fall-through.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10840
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40568420
Pulled By: ltamasi
fbshipit-source-id: 2e614606afd1c3d9c76d9b5f1efa0959fc174103
Summary:
When the `preclude_last_level_data_seconds` or
`preserve_internal_time_seconds` is smaller than 100 (seconds), no seqno->time information was recorded.
Also make sure all data will be compacted to the last level even if there's no write to record the time information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10829
Test Plan: added unittest
Reviewed By: siying
Differential Revision: D40443934
Pulled By: jay-zhuang
fbshipit-source-id: 2ecf1361daf9f3e5c3385aee6dc924fa59e2813a
Summary:
The patch makes it possible to provide the value of the default column
separately when calling `WideColumnSerialization::Serialize`. This eliminates
the need to construct a new `WideColumns` vector in certain cases
(for example, it will come in handy when implementing `Merge`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10839
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40561448
Pulled By: ltamasi
fbshipit-source-id: 69becdd510e6a83ab1feb956c12772110e1040d6
Summary:
This new property allows users to trigger the background block cache stats collection mode through the `GetProperty()` and `GetMapProperty()` APIs. The background mode has much lower overhead at the expense of returning stale values in more cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10832
Test Plan: updated unit test
Reviewed By: pdillinger
Differential Revision: D40497883
Pulled By: ajkr
fbshipit-source-id: bdcc93402f426463abb2153756aad9e295447343
Summary:
FIFO compaction can theoretically open a DB with any compaction style.
However, the current code only allows FIFO compaction to open a DB with
a single level.
This PR relaxes the limitation of FIFO compaction and allows it to open a
DB with multiple levels. Below is the read / write / compaction behavior:
* The read behavior is untouched, and it works like a regular rocksdb instance.
* The write behavior is untouched as well. When a FIFO compacted DB
is opened with multiple levels, all new files will still be in level 0, and no files
will be moved to a different level.
* Compaction logic is extended. It will first identify the bottom-most non-empty level.
Then, it will delete the oldest file in that level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10348
Test Plan:
Added a new test to verify the migration from level to FIFO where the db has multiple levels.
Extended existing test cases in db_test and db_basic_test to also verify
all entries of a key after reopening the DB with FIFO compaction.
Reviewed By: jay-zhuang
Differential Revision: D40233744
fbshipit-source-id: 6cc011d6c3467e6bfb9b6a4054b87619e69815e1
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
The motivation for this change is a planned feature (related to HyperClockCache) that will depend on a large array that can essentially grow automatically, up to some bound, without the pointer address changing and with guaranteed zero-initialization of the data. Anonymous mmaps provide such functionality, and this change provides an internal API for that.
The other existing use of anonymous mmap in RocksDB is for allocating in huge pages. That code and other related Arena code used some awkward non-RAII and pre-C++11 idioms, so I cleaned up much of that as well, with RAII, move semantics, constexpr, etc.
More specifcs:
* Minimize conditional compilation
* Add Windows support for anonymous mmaps
* Use std::deque instead of std::vector for more efficient bag
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10810
Test Plan: unit test added for new functionality
Reviewed By: riversand963
Differential Revision: D40347204
Pulled By: pdillinger
fbshipit-source-id: ca83fcc47e50fabf7595069380edd2954f4f879c
Summary:
This reverts https://github.com/facebook/rocksdb/issues/10792 and uses a different strategy to stabilize the test: remove the unnecessary randomness by providing a constant seed for shuffling keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10816
Test Plan: `gtest-parallel ./db_bloom_filter_test -r1000 --gtest_filter=*ForHits*`
Reviewed By: jay-zhuang
Differential Revision: D40347957
Pulled By: pdillinger
fbshipit-source-id: a270e157485cbd94ed03b80cdd21b954ebd57d57
Summary:
Lock the penultimate level for the whole compaction inputs range, so any
key in that compaction is safe to move up from the last level to
penultimate level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10782
Reviewed By: siying
Differential Revision: D40231540
Pulled By: siying
fbshipit-source-id: ca115cc8b4018b35d797329fa85a19b06cc8c13e
Summary:
This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state.
Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796
Test Plan: tests added/updated, that fail before the change(s) and now pass
Reviewed By: jay-zhuang
Differential Revision: D40232645
Pulled By: jay-zhuang
fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be
Summary:
Provide support for async_io if ReadOptions.tailing is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781
Test Plan:
- Update unit tests
- Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1
Reviewed By: anand1976
Differential Revision: D40128882
Pulled By: anand1976
fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01
Summary:
The test may fail because the L5 files may only cover small portion of the whole key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10792
Test Plan:
```
gtest-parallel ./db_bloom_filter_test --gtest_filter=DBBloomFilterTest.OptimizeFiltersForHits -r 1000 -w 100
```
Reviewed By: siying
Differential Revision: D40217600
Pulled By: siying
fbshipit-source-id: 18db549184bccf5e513eaa7e31ab17385b71ef71
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
When checking if a range [start, end) overlaps with a compaction whose range is [start1, end1), always exclude timestamp from start, end, start1 and end1, otherwise some versions of one user key may be compacted to bottommost layer while others remain in the original level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10787
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40187672
Pulled By: ltamasi
fbshipit-source-id: 81226267fd3e33ffa79665c62abadf2ebec45496
Summary:
To make it consistent with the compaction picker which uses the `sstableKeyCompare()` to pick the overlap files. For example, without this change, it may cut L1 files like:
```
L1: [2-21] [22-30]
L2: [1-10] [21-30]
```
Because "21" on L1 is smaller than "21" on L2. But for compaction, these 2 files are overlapped.
`sstableKeyCompare()` also take range delete into consideration which may cut file for the same key.
It also makes the `max_compaction_bytes` calculation more accurate for cases like above, the overlapped bytes was under estimated. Also make sure the 2 keys won't be splitted to 2 files because of reaching `max_compaction_bytes`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10763
Reviewed By: cbi42
Differential Revision: D39971904
Pulled By: cbi42
fbshipit-source-id: bcc309e9c3dc61a8f50667a6f633e6132c0154a8
Summary:
As the first step of covering the wide-column functionality of iterators
in our stress tests, the patch adds verification logic to
`NonBatchedOpsStressTest::VerifyDb` that checks whether the
iterator's value and columns are in sync. Note: I plan to update the other
types of stress tests and add similar verification for prefix scans etc.
in separate PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10783
Test Plan: Ran some simple blackbox crash tests.
Reviewed By: riversand963
Differential Revision: D40152370
Pulled By: riversand963
fbshipit-source-id: 8f9d17d7af5da58ccf1bd2057cab53cc9645ac35
Summary:
With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773
Test Plan:
Reproduce: D39993203 has detailed steps.
Run the test with and without the fix.
Reviewed By: cbi42
Differential Revision: D40077955
Pulled By: cbi42
fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240
Summary:
fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767
Test Plan: Added a unit test to reproduce the compaction loop.
Reviewed By: ajkr
Differential Revision: D40031861
Pulled By: ajkr
fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b
Summary:
Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770
Test Plan: added a unit test to reproduce the issue.
Reviewed By: ajkr
Differential Revision: D40063809
Pulled By: ajkr
fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725
Reviewed By: ajkr
Differential Revision: D39771069
Pulled By: jay-zhuang
fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd
Summary:
This is intended as a step toward possibly separating secondary cache integration from the
Cache implementation as much as possible, to (hopefully) minimize code duplication in
adding secondary cache support to HyperClockCache.
* Major clarifications to API docs of secondary cache compatible parts of Cache. For example, previously the docs seemed to suggest that Wait() was not needed if IsReady()==true. And it wasn't clear what operations were actually supported on pending handles.
* Add some assertions related to these requirements, such as that we don't Release() before Wait() (which would leak a secondary cache handle).
* Fix a leaky abstraction with dummy handles, which are supposed to be internal to the Cache. Previously, these just used value=nullptr to indicate dummy handle, which meant that they could be confused with legitimate value=nullptr cases like cache reservations. Also fixed blob_source_test which was relying on this leaky abstraction.
* Drop "incomplete" terminology, which was another name for "pending".
* Split handle flags into "mutable" ones requiring mutex and "immutable" ones which do not. Because of single-threaded access to pending handles, the "Is Pending" flag can be in the "immutable" set. This allows removal of a TSAN work-around and removing a mutex acquire-release in IsReady().
* Remove some unnecessary handling of charges on handles of failed lookups. Keeping total_charge=0 means no special handling needed. (Removed one unnecessary mutex acquire/release.)
* Simplify handling of dummy handle in Lookup(). There is no need to explicitly Ref & Release w/Erase if we generally overwrite the dummy anyway. (Removed one mutex acquire/release, a call to Release().)
Intended follow-up:
* Clarify APIs in secondary_cache.h
* Doesn't SecondaryCacheResultHandle transfer ownership of the Value() on success (implementations should not release the value in destructor)?
* Does Wait() need to be called if IsReady() == true? (This would be different from Cache.)
* Do Value() and Size() have undefined behavior if IsReady() == false?
* Why have a custom API for what is essentially a std::future<std::pair<void*, size_t>>?
* Improve unit testing of standalone handle case
* Apparent null `e` bug in `free_standalone_handle` case
* Clean up secondary cache testing in lru_cache_test
* Why does TestSecondaryCacheResultHandle hold on to a Cache::Handle?
* Why does TestSecondaryCacheResultHandle::Wait() do nothing? Shouldn't it establish the post-condition IsReady() == true?
* (Assuming that is sorted out...) Shouldn't TestSecondaryCache::WaitAll simply wait on each handle in order (no casting required)? How about making that the default implementation?
* Why does TestSecondaryCacheResultHandle::Size() check Value() first? If the API is intended to be returning 0 before IsReady(), then that is weird but should at least be documented. Otherwise, if it's intended to be undefined behavior, we should assert IsReady().
* Consider replacing "standalone" and "dummy" entries with a single kind of "weak" entry that deletes its value when it reaches zero refs. Suppose you are using compressed secondary cache and have two iterators at similar places. It will probably common for one iterator to have standalone results pinned (out of cache) when the second iterator needs those same blocks and has to re-load them from secondary cache and duplicate the memory. Combining the dummy and the standalone should fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10730
Test Plan:
existing tests (minor update), and crash test with sanitizers and secondary cache
Performance test for any regressions in LRUCache (primary only):
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test before & after (run at same time) with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X100] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=233000000 -duration 30 -threads=16
```
Before: readrandom [AVG 100 runs] : 22234 (± 63) ops/sec; 1.6 (± 0.0) MB/sec
After: readrandom [AVG 100 runs] : 22197 (± 64) ops/sec; 1.6 (± 0.0) MB/sec
That's within 0.2%, which is not significant by the confidence intervals.
Reviewed By: anand1976
Differential Revision: D39826010
Pulled By: anand1976
fbshipit-source-id: 3202b4a91f673231c97648ae070e502ae16b0f44
Summary:
Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files.
By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open.
Provided support in PosixFileSystem to use "do_not_recurse".
TestPlan:
- Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668
Reviewed By: anand1976
Differential Revision: D39471683
Pulled By: akankshamahajan15
fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
Summary:
currently, there are places in compaction_picker where we add up `compensated_file_size` of files being compacted and limit the sum to be under `max_compaction_bytes`. `compensated_file_size` contains booster for point tombstones and should be used only for determining file's compaction priority. This PR replaces `compensated_file_size` with actual file size in such places.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10728
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D39789427
Pulled By: cbi42
fbshipit-source-id: 1f89fb6c0159c53bf01d8dc783f465959f442c81
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
when a new internal iterator is constructed during iterator refresh, pointer to the previous memtable range tombstone iterator was not cleared. This could cause segfault for future `Refresh()` calls when they try to free the memtable range tombstones. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10739
Test Plan: added a unit test in db_range_del_test.cc to reproduce this issue.
Reviewed By: ajkr, riversand963
Differential Revision: D39825283
Pulled By: cbi42
fbshipit-source-id: 3b59a2b73865aed39e28cdd5c1b57eed7991b94c
Summary:
Currently, without this fix, DBImpl::GetLatestSequenceForKey() may not return the latest sequence number for merge operands of the key. This can cause conflict checking during optimistic transaction commit phase to fail. Fix it by always returning the latest sequence number of the key, also considering range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10724
Test Plan: make check
Reviewed By: cbi42
Differential Revision: D39756847
Pulled By: riversand963
fbshipit-source-id: 0764c3dd4cb24960b37e18adccc6e7feed0e6876
Summary:
We have a lot of confusing code because of mixed, sometimes
completely opposite uses of of the term "raw block" or "raw contents",
sometimes within the same source file. For example, in `BlockBasedTableBuilder`,
`raw_block_contents` and `raw_size` generally referred to uncompressed block
contents and size, while `WriteRawBlock` referred to writing a block that
is already compressed if it is going to be. Meanwhile, in
`BlockBasedTable`, `raw_block_contents` either referred to a (maybe
compressed) block with trailer, or a maybe compressed block maybe
without trailer. (Note: left as follow-up work to use C++ typing to
better sort out the various kinds of BlockContents.)
This change primarily tries to apply some consistent terminology around
the kinds of block representations, avoiding the unclear "raw". (Any
meaning of "raw" assumes some bias toward the storage layer or toward
the logical data layer.) Preferred terminology:
* **Serialized block** - bytes that go into storage. For block-based table
(usually the case) this includes the block trailer. WART: block `size` may or
may not include the trailer; need to be clear about whether it does or not.
* **Maybe compressed block** - like a serialized block, but without the
trailer (or no promise of including a trailer). Must be accompanied by a
CompressionType.
* **Uncompressed block** - "payload" bytes that are either stored with no
compression, used as input to compression function, or result of
decompression function.
* **Parsed block** - an in-memory form of a block in block cache, as it is
used by the table reader. Different C++ types are used depending on the
block type (see block_like_traits.h).
Other refactorings:
* Misc corrections/improvements of internal API comments
* Remove a few misleading / unhelpful / redundant comments.
* Use move semantics in some places to simplify contracts
* Use better parameter names to indicate which parameters are used for
outputs
* Remove some extraneous `extern`
* Various clean-ups to `CacheDumperImpl` (mostly unnecessary code)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408
Test Plan: existing tests
Reviewed By: akankshamahajan15
Differential Revision: D38172617
Pulled By: pdillinger
fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c
Summary:
Change the library order in PLATFORM_LDFLAGS to enable fbcode platform 10 build with folly. This PR also has a few fixes for platform 10 compiler errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10708
Test Plan:
ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_COROUTINES=1 make -j64 check
ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_FOLLY=1 make -j64 check
Reviewed By: ajkr
Differential Revision: D39666590
Pulled By: anand1976
fbshipit-source-id: 256a1127ef561399cd6299a6a392ca29bd68ca44
Summary:
when there is a single memtable without range tombstones and no SST files in the database, DBIter should wrap memtable iterator directly. Currently we create a merging iterator on top of the memtable iterator, and have DBIter wrap around it. This causes iterator regression and this PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10705
Test Plan:
- `make check`
- Performance:
- Set up: `./db_bench -benchmarks=filluniquerandom -write_buffer_size=$((1 << 30)) -num=10000`
- Benchmark: `./db_bench -benchmarks=seekrandom -use_existing_db=true -avoid_flush_during_recovery=true -write_buffer_size=$((1 << 30)) -num=10000 -threads=16 -duration=60 -seek_nexts=$seek_nexts`
```
seek_nexts main op/sec https://github.com/facebook/rocksdb/issues/10705 RocksDB v7.6
0 5746568 5749033 5786180
30 2411690 3006466 2837699
1000 102556 128902 124667
```
Reviewed By: ajkr
Differential Revision: D39644221
Pulled By: cbi42
fbshipit-source-id: 8063ff611ba31b0e5670041da3927c8c54b2097d
Summary:
The background compaction may still running while the test end, which would cause ASAN stack-use-after-scope error.
Explicitly close the DB before test end.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10697
Test Plan:
able to reproduce with:
```
gtest-parallel ./compaction_service_test --gtest_filter=CompactionServiceTest.BasicCompactions -r 10000 -w 100
```
Reviewed By: gitbw95
Differential Revision: D39590974
Pulled By: jay-zhuang
fbshipit-source-id: da264b2e6a276afbda7d5ff7adb9d7b8d4213d90
Summary:
Fix invalid reference in MultiGet due to resizing of the ```batches``` autovector.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10702
Test Plan: Run asan crash test
Reviewed By: riversand963
Differential Revision: D39608753
Pulled By: anand1976
fbshipit-source-id: 7a9e7fc6f436f08eb22003d0e6b0e1e4dcdc1a2a
Summary:
The assertion in ```FilePickerMultiGet::ReplaceRange()``` was incorrect. The function should only be called to replace the range after finishing the search in the current level, which is indicated by ```hit_file_ == nullptr``` i.e no more overlapping files in this level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10695
Reviewed By: gitbw95
Differential Revision: D39583217
Pulled By: anand1976
fbshipit-source-id: d4cedfb2b62fb9f3a083e9848a403ae6342f0519
Summary:
This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons:
* We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache."
* We want to highlight the key feature: it's fast (especially under parallel load)
* Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements.
* We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.)
Some API detail:
* To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`.
* Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated.
For performance tests see https://github.com/facebook/rocksdb/pull/10626
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684
Test Plan: no interesting functional changes; tests updated
Reviewed By: anand1976
Differential Revision: D39547800
Pulled By: pdillinger
fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf
Summary:
* Consolidates most metadata into a single word per slot so that more
can be accomplished with a single atomic update. In the common case,
Lookup was previously about 4 atomic updates, now just 1 atomic update.
Common case Release was previously 1 atomic read + 1 atomic update,
now just 1 atomic update.
* Eliminate spins / waits / yields, which likely threaten some "lock free"
benefits. Compare-exchange loops are only used in explicit Erase, and
strict_capacity_limit=true Insert. Eviction uses opportunistic compare-
exchange.
* Relaxes some aggressiveness and guarantees. For example,
* Duplicate Inserts will sometimes go undetected and the shadow duplicate
will age out with eviction.
* In many cases, the older Inserted value for a given cache key will be kept
(i.e. Insert does not support overwrite).
* Entries explicitly erased (rather than evicted) might not be freed
immediately in some rare cases.
* With strict_capacity_limit=false, capacity limit is not tracked/enforced as
precisely as LRUCache, but is self-correcting and should only deviate by a
very small number of extra or fewer entries.
* Use smaller "computed default" number of cache shards in many cases,
because benefits to larger usage tracking / eviction pools outweigh the small
cost of more lock-free atomic contention. The improvement in CPU and I/O
is dramatic in some limit-memory cases.
* Even without the sharding change, the eviction algorithm is likely more
effective than LRU overall because it's more stateful, even though the
"hot path" state tracking for it is essentially free with ref counting. It
is like a generalized CLOCK with aging (see code comments). I don't have
performance numbers showing a specific improvement, but in theory, for a
Poisson access pattern to each block, keeping some state allows better
estimation of time to next access (Poisson interval) than strict LRU. The
bounded randomness in CLOCK can also reduce "cliff" effect for repeated
range scans approaching and exceeding cache size.
## Hot path algorithm comparison
Rough descriptions, focusing on number and kind of atomic operations:
* Old `Lookup()` (2-5 atomic updates per probe):
```
Loop:
Increment internal ref count at slot
If possible hit:
Check flags atomic (and non-atomic fields)
If cache hit:
Three distinct updates to 'flags' atomic
Increment refs for internal-to-external
Return
Decrement internal ref count
while atomic read 'displacements' > 0
```
* New `Lookup()` (1-2 atomic updates per probe):
```
Loop:
Increment acquire counter in meta word (optimistic)
If visible entry (already read meta word):
If match (read non-atomic fields):
Return
Else:
Decrement acquire counter in meta word
Else if invisible entry (rare, already read meta word):
Decrement acquire counter in meta word
while atomic read 'displacements' > 0
```
* Old `Release()` (1 atomic update, conditional on atomic read, rarely more):
```
Read atomic ref count
If last reference and invisible (rare):
Use CAS etc. to remove
Return
Else:
Decrement ref count
```
* New `Release()` (1 unconditional atomic update, rarely more):
```
Increment release counter in meta word
If last reference and invisible (rare):
Use CAS etc. to remove
Return
```
## Performance test setup
Build DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=${CACHE_MB}000000 -duration 60 -threads=$THREADS -statistics
```
Numbers on a single socket Skylake Xeon system with 48 hardware threads, DEBUG_LEVEL=0 PORTABLE=0. Very similar story on a dual socket system with 80 hardware threads. Using (every 2nd) Fibonacci MB cache sizes to sample the territory between powers of two. Configurations:
base: LRUCache before this change, but with db_bench change to default cache_numshardbits=-1 (instead of fixed at 6)
folly: LRUCache before this change, with folly enabled (distributed mutex) but on an old compiler (sorry)
gt_clock: experimental ClockCache before this change
new_clock: experimental ClockCache with this change
## Performance test results
First test "hot path" read performance, with block cache large enough for whole DB:
4181MB 1thread base -> kops/s: 47.761
4181MB 1thread folly -> kops/s: 45.877
4181MB 1thread gt_clock -> kops/s: 51.092
4181MB 1thread new_clock -> kops/s: 53.944
4181MB 16thread base -> kops/s: 284.567
4181MB 16thread folly -> kops/s: 249.015
4181MB 16thread gt_clock -> kops/s: 743.762
4181MB 16thread new_clock -> kops/s: 861.821
4181MB 24thread base -> kops/s: 303.415
4181MB 24thread folly -> kops/s: 266.548
4181MB 24thread gt_clock -> kops/s: 975.706
4181MB 24thread new_clock -> kops/s: 1205.64 (~= 24 * 53.944)
4181MB 32thread base -> kops/s: 311.251
4181MB 32thread folly -> kops/s: 274.952
4181MB 32thread gt_clock -> kops/s: 1045.98
4181MB 32thread new_clock -> kops/s: 1370.38
4181MB 48thread base -> kops/s: 310.504
4181MB 48thread folly -> kops/s: 268.322
4181MB 48thread gt_clock -> kops/s: 1195.65
4181MB 48thread new_clock -> kops/s: 1604.85 (~= 24 * 1.25 * 53.944)
4181MB 64thread base -> kops/s: 307.839
4181MB 64thread folly -> kops/s: 272.172
4181MB 64thread gt_clock -> kops/s: 1204.47
4181MB 64thread new_clock -> kops/s: 1615.37
4181MB 128thread base -> kops/s: 310.934
4181MB 128thread folly -> kops/s: 267.468
4181MB 128thread gt_clock -> kops/s: 1188.75
4181MB 128thread new_clock -> kops/s: 1595.46
Whether we have just one thread on a quiet system or an overload of threads, the new version wins every time in thousand-ops per second, sometimes dramatically so. Mutex-based implementation quickly becomes contention-limited. New clock cache shows essentially perfect scaling up to number of physical cores (24), and then each hyperthreaded core adding about 1/4 the throughput of an additional physical core (see 48 thread case). Block cache miss rates (omitted above) are negligible across the board. With partitioned instead of full filters, the maximum speed-up vs. base is more like 2.5x rather than 5x.
Now test a large block cache with low miss ratio, but some eviction is required:
1597MB 1thread base -> kops/s: 46.603 io_bytes/op: 1584.63 miss_ratio: 0.0201066 max_rss_mb: 1589.23
1597MB 1thread folly -> kops/s: 45.079 io_bytes/op: 1530.03 miss_ratio: 0.019872 max_rss_mb: 1550.43
1597MB 1thread gt_clock -> kops/s: 48.711 io_bytes/op: 1566.63 miss_ratio: 0.0198923 max_rss_mb: 1691.4
1597MB 1thread new_clock -> kops/s: 51.531 io_bytes/op: 1589.07 miss_ratio: 0.0201969 max_rss_mb: 1583.56
1597MB 32thread base -> kops/s: 301.174 io_bytes/op: 1439.52 miss_ratio: 0.0184218 max_rss_mb: 1656.59
1597MB 32thread folly -> kops/s: 273.09 io_bytes/op: 1375.12 miss_ratio: 0.0180002 max_rss_mb: 1586.8
1597MB 32thread gt_clock -> kops/s: 904.497 io_bytes/op: 1411.29 miss_ratio: 0.0179934 max_rss_mb: 1775.89
1597MB 32thread new_clock -> kops/s: 1182.59 io_bytes/op: 1440.77 miss_ratio: 0.0185449 max_rss_mb: 1636.45
1597MB 128thread base -> kops/s: 309.91 io_bytes/op: 1438.25 miss_ratio: 0.018399 max_rss_mb: 1689.98
1597MB 128thread folly -> kops/s: 267.605 io_bytes/op: 1394.16 miss_ratio: 0.0180286 max_rss_mb: 1631.91
1597MB 128thread gt_clock -> kops/s: 691.518 io_bytes/op: 9056.73 miss_ratio: 0.0186572 max_rss_mb: 1982.26
1597MB 128thread new_clock -> kops/s: 1406.12 io_bytes/op: 1440.82 miss_ratio: 0.0185463 max_rss_mb: 1685.63
610MB 1thread base -> kops/s: 45.511 io_bytes/op: 2279.61 miss_ratio: 0.0290528 max_rss_mb: 615.137
610MB 1thread folly -> kops/s: 43.386 io_bytes/op: 2217.29 miss_ratio: 0.0289282 max_rss_mb: 600.996
610MB 1thread gt_clock -> kops/s: 46.207 io_bytes/op: 2275.51 miss_ratio: 0.0290057 max_rss_mb: 637.934
610MB 1thread new_clock -> kops/s: 48.879 io_bytes/op: 2283.1 miss_ratio: 0.0291253 max_rss_mb: 613.5
610MB 32thread base -> kops/s: 306.59 io_bytes/op: 2250 miss_ratio: 0.0288721 max_rss_mb: 683.402
610MB 32thread folly -> kops/s: 269.176 io_bytes/op: 2187.86 miss_ratio: 0.0286938 max_rss_mb: 628.742
610MB 32thread gt_clock -> kops/s: 855.097 io_bytes/op: 2279.26 miss_ratio: 0.0288009 max_rss_mb: 733.062
610MB 32thread new_clock -> kops/s: 1121.47 io_bytes/op: 2244.29 miss_ratio: 0.0289046 max_rss_mb: 666.453
610MB 128thread base -> kops/s: 305.079 io_bytes/op: 2252.43 miss_ratio: 0.0288884 max_rss_mb: 723.457
610MB 128thread folly -> kops/s: 269.583 io_bytes/op: 2204.58 miss_ratio: 0.0287001 max_rss_mb: 676.426
610MB 128thread gt_clock -> kops/s: 53.298 io_bytes/op: 8128.98 miss_ratio: 0.0292452 max_rss_mb: 956.273
610MB 128thread new_clock -> kops/s: 1301.09 io_bytes/op: 2246.04 miss_ratio: 0.0289171 max_rss_mb: 788.812
The new version is still winning every time, sometimes dramatically so, and we can tell from the maximum resident memory numbers (which contain some noise, by the way) that the new cache is not cheating on memory usage. IMPORTANT: The previous generation experimental clock cache appears to hit a serious bottleneck in the higher thread count configurations, presumably due to some of its waiting functionality. (The same bottleneck is not seen with partitioned index+filters.)
Now we consider even smaller cache sizes, with higher miss ratios, eviction work, etc.
233MB 1thread base -> kops/s: 10.557 io_bytes/op: 227040 miss_ratio: 0.0403105 max_rss_mb: 247.371
233MB 1thread folly -> kops/s: 15.348 io_bytes/op: 112007 miss_ratio: 0.0372238 max_rss_mb: 245.293
233MB 1thread gt_clock -> kops/s: 6.365 io_bytes/op: 244854 miss_ratio: 0.0413873 max_rss_mb: 259.844
233MB 1thread new_clock -> kops/s: 47.501 io_bytes/op: 2591.93 miss_ratio: 0.0330989 max_rss_mb: 242.461
233MB 32thread base -> kops/s: 96.498 io_bytes/op: 363379 miss_ratio: 0.0459966 max_rss_mb: 479.227
233MB 32thread folly -> kops/s: 109.95 io_bytes/op: 314799 miss_ratio: 0.0450032 max_rss_mb: 400.738
233MB 32thread gt_clock -> kops/s: 2.353 io_bytes/op: 385397 miss_ratio: 0.048445 max_rss_mb: 500.688
233MB 32thread new_clock -> kops/s: 1088.95 io_bytes/op: 2567.02 miss_ratio: 0.0330593 max_rss_mb: 303.402
233MB 128thread base -> kops/s: 84.302 io_bytes/op: 378020 miss_ratio: 0.0466558 max_rss_mb: 1051.84
233MB 128thread folly -> kops/s: 89.921 io_bytes/op: 338242 miss_ratio: 0.0460309 max_rss_mb: 812.785
233MB 128thread gt_clock -> kops/s: 2.588 io_bytes/op: 462833 miss_ratio: 0.0509158 max_rss_mb: 1109.94
233MB 128thread new_clock -> kops/s: 1299.26 io_bytes/op: 2565.94 miss_ratio: 0.0330531 max_rss_mb: 361.016
89MB 1thread base -> kops/s: 0.574 io_bytes/op: 5.35977e+06 miss_ratio: 0.274427 max_rss_mb: 91.3086
89MB 1thread folly -> kops/s: 0.578 io_bytes/op: 5.16549e+06 miss_ratio: 0.27276 max_rss_mb: 96.8984
89MB 1thread gt_clock -> kops/s: 0.512 io_bytes/op: 4.13111e+06 miss_ratio: 0.242817 max_rss_mb: 119.441
89MB 1thread new_clock -> kops/s: 48.172 io_bytes/op: 2709.76 miss_ratio: 0.0346162 max_rss_mb: 100.754
89MB 32thread base -> kops/s: 5.779 io_bytes/op: 6.14192e+06 miss_ratio: 0.320399 max_rss_mb: 311.812
89MB 32thread folly -> kops/s: 5.601 io_bytes/op: 5.83838e+06 miss_ratio: 0.313123 max_rss_mb: 252.418
89MB 32thread gt_clock -> kops/s: 0.77 io_bytes/op: 3.99236e+06 miss_ratio: 0.236296 max_rss_mb: 396.422
89MB 32thread new_clock -> kops/s: 1064.97 io_bytes/op: 2687.23 miss_ratio: 0.0346134 max_rss_mb: 155.293
89MB 128thread base -> kops/s: 4.959 io_bytes/op: 6.20297e+06 miss_ratio: 0.323945 max_rss_mb: 823.43
89MB 128thread folly -> kops/s: 4.962 io_bytes/op: 5.9601e+06 miss_ratio: 0.319857 max_rss_mb: 626.824
89MB 128thread gt_clock -> kops/s: 1.009 io_bytes/op: 4.1083e+06 miss_ratio: 0.242512 max_rss_mb: 1095.32
89MB 128thread new_clock -> kops/s: 1224.39 io_bytes/op: 2688.2 miss_ratio: 0.0346207 max_rss_mb: 218.223
^ Now something interesting has happened: the new clock cache has gained a dramatic lead in the single-threaded case, and this is because the cache is so small, and full filters are so big, that dividing the cache into 64 shards leads to significant (random) imbalances in cache shards and excessive churn in imbalanced shards. This new clock cache only uses two shards for this configuration, and that helps to ensure that entries are part of a sufficiently big pool that their eviction order resembles the single-shard order. (This effect is not seen with partitioned index+filters.)
Even smaller cache size:
34MB 1thread base -> kops/s: 0.198 io_bytes/op: 1.65342e+07 miss_ratio: 0.939466 max_rss_mb: 48.6914
34MB 1thread folly -> kops/s: 0.201 io_bytes/op: 1.63416e+07 miss_ratio: 0.939081 max_rss_mb: 45.3281
34MB 1thread gt_clock -> kops/s: 0.448 io_bytes/op: 4.43957e+06 miss_ratio: 0.266749 max_rss_mb: 100.523
34MB 1thread new_clock -> kops/s: 1.055 io_bytes/op: 1.85439e+06 miss_ratio: 0.107512 max_rss_mb: 75.3125
34MB 32thread base -> kops/s: 3.346 io_bytes/op: 1.64852e+07 miss_ratio: 0.93596 max_rss_mb: 180.48
34MB 32thread folly -> kops/s: 3.431 io_bytes/op: 1.62857e+07 miss_ratio: 0.935693 max_rss_mb: 137.531
34MB 32thread gt_clock -> kops/s: 1.47 io_bytes/op: 4.89704e+06 miss_ratio: 0.295081 max_rss_mb: 392.465
34MB 32thread new_clock -> kops/s: 8.19 io_bytes/op: 3.70456e+06 miss_ratio: 0.20826 max_rss_mb: 519.793
34MB 128thread base -> kops/s: 2.293 io_bytes/op: 1.64351e+07 miss_ratio: 0.931866 max_rss_mb: 449.484
34MB 128thread folly -> kops/s: 2.34 io_bytes/op: 1.6219e+07 miss_ratio: 0.932023 max_rss_mb: 396.457
34MB 128thread gt_clock -> kops/s: 1.798 io_bytes/op: 5.4241e+06 miss_ratio: 0.324881 max_rss_mb: 1104.41
34MB 128thread new_clock -> kops/s: 10.519 io_bytes/op: 2.39354e+06 miss_ratio: 0.136147 max_rss_mb: 1050.52
As the miss ratio gets higher (say, above 10%), the CPU time spent in eviction starts to erode the advantage of using fewer shards (13% miss rate much lower than 94%). LRU's O(1) eviction time can eventually pay off when there's enough block cache churn:
13MB 1thread base -> kops/s: 0.195 io_bytes/op: 1.65732e+07 miss_ratio: 0.946604 max_rss_mb: 45.6328
13MB 1thread folly -> kops/s: 0.197 io_bytes/op: 1.63793e+07 miss_ratio: 0.94661 max_rss_mb: 33.8633
13MB 1thread gt_clock -> kops/s: 0.519 io_bytes/op: 4.43316e+06 miss_ratio: 0.269379 max_rss_mb: 100.684
13MB 1thread new_clock -> kops/s: 0.176 io_bytes/op: 1.54148e+07 miss_ratio: 0.91545 max_rss_mb: 66.2383
13MB 32thread base -> kops/s: 3.266 io_bytes/op: 1.65544e+07 miss_ratio: 0.943386 max_rss_mb: 132.492
13MB 32thread folly -> kops/s: 3.396 io_bytes/op: 1.63142e+07 miss_ratio: 0.943243 max_rss_mb: 101.863
13MB 32thread gt_clock -> kops/s: 2.758 io_bytes/op: 5.13714e+06 miss_ratio: 0.310652 max_rss_mb: 396.121
13MB 32thread new_clock -> kops/s: 3.11 io_bytes/op: 1.23419e+07 miss_ratio: 0.708425 max_rss_mb: 321.758
13MB 128thread base -> kops/s: 2.31 io_bytes/op: 1.64823e+07 miss_ratio: 0.939543 max_rss_mb: 425.539
13MB 128thread folly -> kops/s: 2.339 io_bytes/op: 1.6242e+07 miss_ratio: 0.939966 max_rss_mb: 346.098
13MB 128thread gt_clock -> kops/s: 3.223 io_bytes/op: 5.76928e+06 miss_ratio: 0.345899 max_rss_mb: 1087.77
13MB 128thread new_clock -> kops/s: 2.984 io_bytes/op: 1.05341e+07 miss_ratio: 0.606198 max_rss_mb: 898.27
gt_clock is clearly blowing way past its memory budget for lower miss rates and best throughput. new_clock also seems to be exceeding budgets, and this warrants more investigation but is not the use case we are targeting with the new cache. With partitioned index+filter, the miss ratio is much better, and although still high enough that the eviction CPU time is definitely offsetting mutex contention:
13MB 1thread base -> kops/s: 16.326 io_bytes/op: 23743.9 miss_ratio: 0.205362 max_rss_mb: 65.2852
13MB 1thread folly -> kops/s: 15.574 io_bytes/op: 19415 miss_ratio: 0.184157 max_rss_mb: 56.3516
13MB 1thread gt_clock -> kops/s: 14.459 io_bytes/op: 22873 miss_ratio: 0.198355 max_rss_mb: 63.9688
13MB 1thread new_clock -> kops/s: 16.34 io_bytes/op: 24386.5 miss_ratio: 0.210512 max_rss_mb: 61.707
13MB 128thread base -> kops/s: 289.786 io_bytes/op: 23710.9 miss_ratio: 0.205056 max_rss_mb: 103.57
13MB 128thread folly -> kops/s: 185.282 io_bytes/op: 19433.1 miss_ratio: 0.184275 max_rss_mb: 116.219
13MB 128thread gt_clock -> kops/s: 354.451 io_bytes/op: 23150.6 miss_ratio: 0.200495 max_rss_mb: 102.871
13MB 128thread new_clock -> kops/s: 295.359 io_bytes/op: 24626.4 miss_ratio: 0.212452 max_rss_mb: 121.109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10626
Test Plan: updated unit tests, stress/crash test runs including with TSAN, ASAN, UBSAN
Reviewed By: anand1976
Differential Revision: D39368406
Pulled By: pdillinger
fbshipit-source-id: 5afc44da4c656f8f751b44552bbf27bd3ca6fef9
Summary:
The stats were not accurate for the coroutine version of MultiGet. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10673
Reviewed By: akankshamahajan15
Differential Revision: D39492615
Pulled By: anand1976
fbshipit-source-id: b46c04e15ea27e66f4c31f00c66497aa283bf9d3
Summary:
Fix a bug in the async IO/coroutine version of MultiGet that may cause a segfault or assertion failure due to accessing an invalid file index in a LevelFilesBrief. The bug is that when a MultiGetRange is split into two, we may re-process keys in the original range that were already marked to be skipped (in ```current_level_range_```) due to not overlapping the level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10688
Reviewed By: gitbw95
Differential Revision: D39556131
Pulled By: anand1976
fbshipit-source-id: 65e79438508a283cb19e64eca5c91d0714b81458
Summary:
When user-defined timestamp is enabled, subcompaction bounds should be set up properly. When creating InputIterator for the compaction, the `start` and `end` should have their timestamp portions set to kMaxTimestamp, which is the highest possible timestamp. This is similar to what we do with setting up their sequence numbers to `kMaxSequenceNumber`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10658
Test Plan:
```bash
make check
rm -rf /dev/shm/rocksdb/* && mkdir
/dev/shm/rocksdb/rocksdb_crashtest_expected && ./db_stress
--allow_data_in_errors=True --clear_column_family_one_in=0
--continuous_verification_interval=0 --data_block_index_type=1
--db=/dev/shm/rocksdb//rocksdb_crashtest_blackbox --delpercent=5
--delrangepercent=0
--expected_values_dir=/dev/shm/rocksdb//rocksdb_crashtest_expected
--iterpercent=0 --max_background_compactions=20
--max_bytes_for_level_base=10485760 --max_key=25000000
--max_write_batch_group_size_bytes=1048576 --nooverwritepercent=1
--ops_per_thread=300000 --paranoid_file_checks=1 --partition_filters=0
--prefix_size=8 --prefixpercent=5 --readpercent=30 --reopen=0
--snapshot_hold_ops=100000 --subcompactions=4
--target_file_size_base=65536 --target_file_size_multiplier=2
--test_batches_snapshots=0 --test_cf_consistency=0 --use_multiget=1
--user_timestamp_size=8 --value_size_mult=32 --verify_checksum=1
--write_buffer_size=65536 --writepercent=60 -disable_wal=1
-column_families=1
```
Reviewed By: akankshamahajan15
Differential Revision: D39393402
Pulled By: riversand963
fbshipit-source-id: f276e35b19fce51a175c368a502fb0718d1f3871
Summary:
fix a data race introduced in https://github.com/facebook/rocksdb/issues/10547 (P5295241720), first reported by pdillinger. The race is between the `std::atomic_load_explicit` in NewRangeTombstoneIteratorInternal and the `std::atomic_store_explicit` in MemTable::Add() that operate on `cached_range_tombstone_`. P5295241720 shows that `atomic_store_explicit` initializes some mutex which `atomic_load_explicit` could be trying to call `lock()` on at the same time. This fix moves the initialization to memtable constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10680
Test Plan: `USE_CLANG=1 COMPILE_WITH_TSAN=1 make -j24 whitebox_crash_test`
Reviewed By: ajkr
Differential Revision: D39528696
Pulled By: cbi42
fbshipit-source-id: ee740841044438e18ad2b8ea567444dd542dd8e2
Summary:
The patch extends the iterator API with a new `columns` method which
can be used to retrieve all wide columns for the current key. Similarly to
the `Get` and `GetEntity` APIs, the classic `value` API returns the value
of the default (anonymous) column for wide-column entities, and `columns`
returns an entity with a single default column for plain old key-values.
(The goal here is to maintain the invariant that `value()` is the same as
the value of the default column in `columns()`.) The patch also involves a
smaller refactoring: historically, `value()` was implemented using a bunch
of conditions, that is, the `Slice` to be returned was decided based on the
direction of the iteration, whether a merge had been done etc. when the
method was called; with the patch, the value to be exposed is stored in a
member `Slice value_` when the iterator lands on a new key, and `value()`
simply returns this `Slice`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10670
Test Plan: Ran `make check` and a simple blackbox crash test.
Reviewed By: riversand963
Differential Revision: D39475551
Pulled By: ltamasi
fbshipit-source-id: 29e7a6ed9ef340841aab36803b832b7c8f668b0b
Summary:
Each read from memtable used to read and fragment all the range tombstones into a `FragmentedRangeTombstoneList`. https://github.com/facebook/rocksdb/issues/10380 improved the inefficient here by caching a `FragmentedRangeTombstoneList` with each immutable memtable. This PR extends the caching to mutable memtables. The fragmented range tombstone can be constructed in either read (This PR) or write path (https://github.com/facebook/rocksdb/issues/10584). With both implementation, each `DeleteRange()` will invalidate the cache, and the difference is where the cache is re-constructed.`CoreLocalArray` is used to store the cache with each memtable so that multi-threaded reads can be efficient. More specifically, each core will have a shared_ptr to a shared_ptr pointing to the current cache. Each read thread will only update the reference count in its core-local shared_ptr, and this is only needed when reading from mutable memtables.
The choice between write path and read path is not an easy one: they are both improvement compared to no caching in the current implementation, but they favor different operations and could cause regression in the other operation (read vs write). The write path caching in (https://github.com/facebook/rocksdb/issues/10584) leads to a cleaner implementation, but I chose the read path caching here to avoid significant regression in write performance when there is a considerable amount of range tombstones in a single memtable (the number from the benchmark below suggests >1000 with concurrent writers). Note that even though the fragmented range tombstone list is only constructed in `DeleteRange()` operations, it could block other writes from proceeding, and hence affects overall write performance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10547
Test Plan:
- TestGet() in stress test is updated in https://github.com/facebook/rocksdb/issues/10553 to compare Get() result against expected state: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Perf benchmark: tested read and write performance where a memtable has 0, 1, 10, 100 and 1000 range tombstones.
```
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=200000 --reads=100000 --disable_auto_compactions --max_num_range_tombstones=1000
```
Write perf regressed since the cost of constructing fragmented range tombstone list is shifted from every read to a single write. 6cbe5d8e172dc5f1ef65c9d0a6eedbd9987b2c72 is included in the last column as a reference to see performance impact on multi-thread reads if `CoreLocalArray` is not used.
micros/op averaged over 5 runs: first 4 columns are for fillrandom, last 4 columns are for readrandom.
| |fillrandom main | write path caching | read path caching |memtable V3 (https://github.com/facebook/rocksdb/issues/10308) | readrandom main | write path caching | read path caching |memtable V3 |
|--- |--- |--- |--- |--- | --- | --- | --- | --- |
| 0 |6.35 |6.15 |5.82 |6.12 |2.24 |2.26 |2.03 |2.07 |
| 1 |5.99 |5.88 |5.77 |6.28 |2.65 |2.27 |2.24 |2.5 |
| 10 |6.15 |6.02 |5.92 |5.95 |5.15 |2.61 |2.31 |2.53 |
| 100 |5.95 |5.78 |5.88 |6.23 |28.31 |2.34 |2.45 |2.94 |
| 100 25 threads |52.01 |45.85 |46.18 |47.52 |35.97 |3.34 |3.34 |3.56 |
| 1000 |6.0 |7.07 |5.98 |6.08 |333.18 |2.86 |2.7 |3.6 |
| 1000 25 threads |52.6 |148.86 |79.06 |45.52 |473.49 |3.66 |3.48 |4.38 |
- Benchmark performance of`readwhilewriting` from https://github.com/facebook/rocksdb/issues/10552, 100 range tombstones are written: `./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=500 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=100000 --reads=500000 --disable_auto_compactions --max_num_range_tombstones=10000 --finish_after_writes`
readrandom micros/op:
| |main |write path caching |read path caching |memtable V3 |
|---|---|---|---|---|
| single thread |48.28 |1.55 |1.52 |1.96 |
| 25 threads |64.3 |2.55 |2.67 |2.64 |
Reviewed By: ajkr
Differential Revision: D38895410
Pulled By: cbi42
fbshipit-source-id: 930bfc309dd1b2f4e8e9042f5126785bba577559
Summary:
**Context/Summary:**
Previous experience with bugs and flaky tests taught us there exist features in RocksDB vulnerable to race condition caused by acquiring db mutex at a particular timing. This PR aggressively exposes those vulnerable features by injecting spurious wakeup and sleep to cause acquiring db mutex at various timing in order to expose such race condition
**Testing:**
- `COERCE_CONTEXT_SWITCH=1 make -j56 check / make -j56 db_stress` should reveal
- flaky tests caused by db mutex related race condition
- Reverted https://github.com/facebook/rocksdb/pull/9528
- A/B testing on `COMPILE_WITH_TSAN=1 make -j56 listener_test` w/ and w/o `COERCE_CONTEXT_SWITCH=1` followed by `./listener_test --gtest_filter=EventListenerTest.MultiCF --gtest_repeat=10`
- `COERCE_CONTEXT_SWITCH=1` can cause expected test failure (i.e, expose target TSAN data race error) within 10 run while the other couldn't.
- This proves our injection can expose flaky tests caused by db mutex related race condition faster.
- known or new race-condition-type of internal bug by continuously running this PR
- Performance
- High ops-threads time: COERCE_CONTEXT_SWITCH=1 regressed by 4 times slower (2:01.16 vs 0:22.10 elapsed ). This PR will be run as a separate CI job so this regression won't affect any existing job.
```
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=100000 --expected_values_dir=$exp --clear_column_family_one_in=0 \
--write_buffer_size=524288 —target_file_size_base=524288 —ingest_external_file_one_in=100 —compact_files_one_in=1000 —compact_range_one_in=1000
```
- Start-up time: COERCE_CONTEXT_SWITCH=1 didn't regress by 25% (0:01.51 vs 0:01.29 elapsed)
```
TEST_TMPDIR=$db ./db_stress -ops_per_thread=100000000 -expected_values_dir=$exp --clear_column_family_one_in=0 & sleep 120; pkill -9 db_stress
TEST_TMPDIR=$db /usr/bin/time ./db_stress \
--ops_per_thread=1 -reopen=0 --expected_values_dir=$exp --clear_column_family_one_in=0 --destroy_db_initially=0
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10291
Reviewed By: ajkr
Differential Revision: D39231182
Pulled By: hx235
fbshipit-source-id: 7ab6695430460e0826727fd8c66679b32b3e44b6
Summary:
Historically, `BlobFileReader` has returned the blob(s) read from the file
in the `PinnableSlice` provided by the client. This interface was
preserved when caching was implemented for blobs, which meant that
the blob data was copied multiple times when caching was in use: first,
into the client-provided `PinnableSlice` (by `BlobFileReader::SaveValue`),
and then, into the object stored in the cache (by `BlobSource::PutBlobIntoCache`).
The patch eliminates these copies and the related allocations by changing
`BlobFileReader` so it returns its results in the form of heap-allocated `BlobContents`
objects that can be directly inserted into the cache. The allocations backing
these `BlobContents` objects are made using the blob cache's allocator if the
blobs are to be inserted into the cache (i.e. if a cache is configured and the
`fill_cache` read option is set). Note: this PR focuses on the common case when
blobs are compressed; some further small optimizations are possible for uncompressed
blobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10647
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39335185
Pulled By: ltamasi
fbshipit-source-id: 464503d60a5520d654c8273ffb8efd5d1bcd7b36
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
Summary:
Example failure:
```
db/blob/db_blob_basic_test.cc:226: Failure
Expected equality of these values:
i
Which is: 1
num_blobs
Which is: 5
```
I can't repro locally, but it looks like the 2KB cache is too small to guarantee no eviction happens between loading all the data into cache and reading from `kBlockCacheTier`. This 2KB setting appears to have come from a test where the cached entries are pinned, where it makes sense to have a small setting. However, such a small setting makes less sense when the blocks are evictable but must remain cached per the test's expectation. This PR increases the capacity setting to 2MB for those cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10636
Reviewed By: cbi42
Differential Revision: D39250976
Pulled By: ajkr
fbshipit-source-id: 769309f9a19cfac20b67b927805c8df5c1d2d1f5
Summary:
Example flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/17660/workflows/7a891875-f07b-4a67-b204-eaa7ca9f9aa2/jobs/467496
The test could get stuck in out-of-space due to a callback executing `SetFilesystemActive(false /* active */)` after the test executed `SetFilesystemActive(true /* active */)`. This could happen because background info logging went through the SyncPoint callback "WritableFileWriter::Append:BeforePrepareWrite", probably unintentionally. The solution of this PR is to call `ClearAllCallBacks()` to wait for any such pending callbacks to drain before calling `SetFilesystemActive(true /* active */)`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10642
Reviewed By: cbi42
Differential Revision: D39265381
Pulled By: ajkr
fbshipit-source-id: 9a2f4916ab19726c8fb4b3a3b590b1b9ed93de1b
Summary:
Previously, automatic compaction could be triggered prior to the test invoking CompactRange(). It could lead to the following flaky failure:
```
/root/project/db/db_block_cache_test.cc:753: Failure
Expected equality of these values:
1 + kNumBlocks
Which is: 11
options.statistics->getTickerCount(BLOCK_CACHE_INDEX_ADD)
Which is: 10
```
A sequence leading to this failure was:
* Automatic compaction
* files [1] [2] trivially moved
* files [3] [4] [5] [6] trivially moved
* CompactRange()
* files [7] [8] [9] trivially moved
* file [10] trivially moved
In such a case, the index/filter block adds that the test expected did not happen since there were no new files.
This PR just tweaks settings to ensure the `CompactRange()` produces one new file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10635
Reviewed By: cbi42
Differential Revision: D39250869
Pulled By: ajkr
fbshipit-source-id: a3c94c49069e28c49c40b4b80dae0059739d19fd
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
With the current code, when a blob isn't found in the cache and gets read
from the blob file and then inserted into the cache, the application gets
passed the self-contained `PinnableSlice` resulting from the blob file read.
The patch changes this so that the `PinnableSlice` pins the cache entry
instead in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10625
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D39220904
Pulled By: ltamasi
fbshipit-source-id: cb9c62881e3523b1e9f614e00bf503bac2fe3b0a
Summary:
This stat was only getting updated in the async (coroutine) version of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622
Reviewed By: akankshamahajan15
Differential Revision: D39188790
Pulled By: anand1976
fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
Summary:
sanity check value for option `memtable_protection_bytes_per_key` in `ColumnFamilyData::ValidateOptions()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10621
Test Plan: `make check`, added unit test in ColumnFamilyTest.
Reviewed By: ajkr
Differential Revision: D39180133
Pulled By: cbi42
fbshipit-source-id: 009e0da3ccb332d1c9e14d20193304610bd4eb8a
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
The patch adds a dedicated cache entry role for blob values and switches
to a registered deleter so that blobs show up as a separate bucket
(as opposed to "Misc") in the cache occupancy statistics, e.g.
```
Block cache entry stats(count,size,portion): DataBlock(133515,531.73 MB,13.6866%) BlobValue(1824855,3.10 GB,81.7071%) Misc(1,0.00 KB,0%)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10601
Test Plan: Ran `make check` and tested the cache occupancy statistics using `db_bench`.
Reviewed By: riversand963
Differential Revision: D39107915
Pulled By: ltamasi
fbshipit-source-id: 8446c3b190a41a144030df73f318eeda4398c125
Summary:
Some APIs for getting live files, which are used by Checkpoint
and BackupEngine, can optionally trigger and wait for a flush. These
would deadlock when used on a read-only DB. Here we fix that by assuming
the user wants the overall operation to succeed and is OK without
flushing (because the DB is read-only).
Follow-up work: the same or other issues can be hit by directly invoking
some DB functions that are clearly not appropriate for read-only
instance, but are not covered by overrides in DBImplReadOnly and
CompactedDBImpl. These should be fixed to avoid similar problems on
accidental misuse. (Long term, it would be nice to have a DBReadOnly
class without those members, like BackupEngineReadOnly.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569
Test Plan: tests updated to catch regression (hang before the fix)
Reviewed By: riversand963
Differential Revision: D38995759
Pulled By: pdillinger
fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
Summary:
The patch improves the bookkeeping around the memory usage of
cached blobs in two ways: 1) it uses `malloc_usable_size`, which accounts
for allocator bin sizes etc., and 2) it also considers the memory usage
of the `BlobContents` object in addition to the blob itself. Note: some unit
tests had been relying on the cache charge being equal to the size of the
cached blob; these were updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10583
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39060680
Pulled By: ltamasi
fbshipit-source-id: 3583adce2b4ce6e84861f3fadccbfd2e5a3cc482
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
The patch introduces a new class called `BlobContents`, which represents
a single uncompressed blob value. We currently use `std::string` for this
purpose; `BlobContents` is somewhat smaller but the primary reason for a
dedicated class is that it enables certain improvements and optimizations
like eliding a copy when inserting a blob into the cache, using custom
allocators, or more control over and better accounting of the memory usage
of cached blobs (see https://github.com/facebook/rocksdb/issues/10484).
(We plan to implement these in subsequent PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39000965
Pulled By: ltamasi
fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
In UniversalCompactionBuilder::PickCompactionToReduceSortedRuns, we passed start_level to get compression type and options. I think that is wrong and we should use output_level instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10515
Reviewed By: hx235
Differential Revision: D38611335
Pulled By: ajkr
fbshipit-source-id: bb860caed4b6c6bbde8f75fc50cf875a9f04723d
Summary:
This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535
Test Plan:
1. Ensure existing MultiGet unit tests pass, updating them as necessary
2. New unit tests - TODO
3. Run stress test - TODO
No noticeable regression (<1%) without async IO -
Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)`
With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)`
For a fully cached DB, but with async IO option on, no regression observed (<1%) -
Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) `
With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) `
Reviewed By: akankshamahajan15
Differential Revision: D38774009
Pulled By: anand1976
fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007
Summary:
The patch adds a new API `GetEntity` that can be used to perform
wide-column point lookups. It also extends the `Get` code path and
the `MemTable` / `MemTableList` and `Version` / `GetContext` logic
accordingly so that wide-column entities can be served from both
memtables and SSTs. If the result of a lookup is a wide-column entity
(`kTypeWideColumnEntity`), it is passed to the application in deserialized
form; if it is a plain old key-value (`kTypeValue`), it is presented as a
wide-column entity with a single default (anonymous) column.
(In contrast, regular `Get` returns plain old key-values as-is, and
returns the value of the default column for wide-column entities, see
https://github.com/facebook/rocksdb/issues/10483 .)
The result of `GetEntity` is a self-contained `PinnableWideColumns` object.
`PinnableWideColumns` contains a `PinnableSlice`, which either stores the
underlying data in its own buffer or holds on to a cache handle. It also contains
a `WideColumns` instance, which indexes the contents of the `PinnableSlice`,
so applications can access the values of columns efficiently.
There are several pieces of functionality which are currently not supported
for wide-column entities: there is currently no `MultiGetEntity` or wide-column
iterator; also, `Merge` and `GetMergeOperands` are not supported, and there
is no `GetEntity` implementation for read-only and secondary instances.
We plan to implement these in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38847474
Pulled By: ltamasi
fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
Summary:
Previously, the flushes triggered by `WriteBufferManager` could affect
the same CF repeatedly if it happens to get consecutive writes. Such
flushes are not particularly useful for reducing memory usage since
they switch nearly-empty memtables to immutable while they've just begun
filling their first arena block. In fact they may not even reduce the
mutable memory count if they involve replacing one mutable memtable containing
one arena block with a new mutable memtable containing one arena block.
Further, if such switches happen even a few times before a flush finishes,
the immutable memtable limit will be reached and writes will stall.
This PR adds a heuristic to not switch memtables to immutable for CFs
that already have one or more immutable memtables awaiting flush. There
is a memory usage regression if the user continues writing to the same
CF, that DB does not have any CFs eligible for switching, flushes
are not finishing, and the `WriteBufferManager` was constructed with
`allow_stall=false`. Before, it would grow by switching nearly empty
memtables until writes stall. Now, it would grow by filling memtables
until writes stall. This feels like an acceptable behavior change because
users who prefer to stall over violate the memory limit should be using
`allow_stall=true`, which is unaffected by this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6364
Test Plan:
- Command:
`rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num_multi_db=8 -num_column_families=2 -write_buffer_size=4194304 -db_write_buffer_size=16777216 -compression_type=none -statistics=true -target_file_size_base=4194304 -max_bytes_for_level_base=16777216`
- `rocksdb.db.write.stall` count before this PR: 175
- `rocksdb.db.write.stall` count after this PR: 0
Reviewed By: jay-zhuang
Differential Revision: D20167197
Pulled By: ajkr
fbshipit-source-id: 4a64064e9bc33d57c0a35f15547542d0191d0cb7
Summary:
The fix in https://github.com/facebook/rocksdb/issues/10513 was not complete w.r.t range deletion handling. It didn't handle the case where a file with a range tombstone covering a key also overlapped another key in the batch. In that case, ```mget_range``` would be non-empty. However, ```mget_range``` would only have the second key and, therefore, the first key would be skipped when iterating through the range tombstones in ```TableCache::MultiGet```.
Test plan -
1. Add a unit test
2. Run stress tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10534
Reviewed By: akankshamahajan15
Differential Revision: D38773880
Pulled By: anand1976
fbshipit-source-id: dae491dbe52e18bbce5179b77b63f20771a66c00
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
Summary:
Fix copyright for two more extra headers to make internal tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10525
Reviewed By: jay-zhuang
Differential Revision: D38661390
fbshipit-source-id: ab2d055bfd145dfe82b5bae7a6c25cc338c8de94
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
The info LOG file does not currently give any direct
information about the existence of old, live snapshots, nor how to
estimate wall time from a sequence number within the scope of LOG
history. This change addresses both with:
* Logging smallest and largest seqnos for generated SST files, which can
help associate sequence numbers with write time (based on flushes).
* Logging oldest_snapshot_seqno for each compaction, which (along with
that seqno info) helps us to determine how much old data might be kept
around for old (leaked?) snapshots. Including the date here I thought might
be excessive.
I wanted to log the date and seqno of the oldest snapshot with periodic
stats, but the current structure of the code doesn't really support that
because `DumpDBStats` doesn't have access to the DB object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10454
Test Plan:
manual inspect LOG from
`KEEP_DB=1 ./db_basic_test --gtest_filter=*CompactBetweenSnapshots*`
Reviewed By: ajkr
Differential Revision: D38326948
Pulled By: pdillinger
fbshipit-source-id: 294918ffc04a419844146cd826045321b4d5c038
Summary:
https://github.com/facebook/rocksdb/pull/10057 caused a regression bug: since the base level size is not adjusted based on L0 size anymore, L0 score might become very large. This makes compaction heavily favor L0->L1 compaction against L1->L2 compaction, and cause in some cases, data stuck in L1 without being moved down. We fix calculating a score of L0 by size(L0)/size(L1) in the case where L0 is large..
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10518
Test Plan: run db_bench against data on tmpfs and watch the behavior of data stuck in L1 goes away.
Reviewed By: ajkr
Differential Revision: D38603145
fbshipit-source-id: 4949e52dc28b54aacfe08417c6e6cc7e40a27225
Summary:
New blobdb has a bug in compaction filter, where `blob_value_` is not reset for next iterated key. This will cause blob_value_ not empty and previous value read from blob is passed into the filter function for next key, even if its value is not in blob. Fixed by reseting regardless of key type.
Test Case:
Add `FilterByValueLength` test case in `DBBlobCompactionTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10391
Reviewed By: riversand963
Differential Revision: D38629900
Pulled By: ltamasi
fbshipit-source-id: 47d23ff2e5ec697958a210db9e6ceeb8b2fc49fa
Summary:
Some files miss headers. Also some headers are irregular. Fix them to make an internal checkup tool happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10519
Reviewed By: jay-zhuang
Differential Revision: D38603291
fbshipit-source-id: 13b1bbd6d48f5ee15ba20da67544396de48238f1
Summary:
Moved linux builds to using docker to avoid CI instability caused by dependency installation site down.
Added the `Dockerfile` which is used to build the image.
The build time is also significantly reduced, because no dependencies installation and with using 2xlarge+ instance for slow build (like tsan test).
Also fixed a few issues detected while building this:
* `DestoryDB()` Status not checked for a few tests
* nullptr might be used in `inlineskiplist.cc`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10496
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D38554200
Pulled By: jay-zhuang
fbshipit-source-id: 16e8fb2bf07b9c84bb27fb18421c4d54f2f248fd
Summary:
A test in db_block_cache_test.cc was skipping ClockCache due to the 16-byte key length requirement. We fixed this. Along the way, we fixed a bug in ApplyToSomeEntries, which assumed the function being applied could modify handle metadata, and thus took an exclusive reference. This is incompatible with calls that need to inspect every element (including externally referenced ones) to gather stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10482
Test Plan: ``make -j24 check``
Reviewed By: anand1976
Differential Revision: D38553073
Pulled By: guidotag
fbshipit-source-id: 0ed63fed4d3b89e5056b35b7091fce579f5647ae
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
The main purpose is to make debugging easier without sacrificing performance.
Instead of using a boolean variable for `CompactionIterator::valid_`, we can extend it to an `uint8_t`,
using the LSB to denote if the compaction iterator is valid and 4 additional bits to denote where
the iterator is set valid inside `NextFromInput()`. Therefore, when the control flow reaches
`PrepareOutput()` and hits assertion there, we can have a better idea of what has gone wrong.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10505
Test Plan:
make check
```
TEST_TMPDIR=/dev/shm/rocksdb time ./db_bench -compression_type=none -write_buffer_size=1073741824 -benchmarks=fillseq,flush
```
The above command has a 'flush' benchmark which uses `CompactionIterator`. I haven't observed any CPU regression or drop in throughput or latency increase.
Reviewed By: ltamasi
Differential Revision: D38551615
Pulled By: riversand963
fbshipit-source-id: 1250848fc118bb753d71fa9ff8ba840df999f5e0
Summary:
This PR fixes 2 bugs introduced in https://github.com/facebook/rocksdb/issues/10432 -
1. If the bloom filter returned a negative result for all MultiGet keys in a file, the range tombstones in that file were being ignored, resulting in incorrect results if those tombstones covered a key in a higher level.
2. If all the keys in a file were filtered out in `TableCache::MultiGetFilter`, the table cache handle was not being released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10513
Test Plan: Add a new unit test that fails without this fix
Reviewed By: akankshamahajan15
Differential Revision: D38548739
Pulled By: anand1976
fbshipit-source-id: a741a1e25d2e991d63f038100f126c2dc404a87c
Summary:
We have recently added caching support to BlobDB, and separately,
implemented an optimization where reading blobs from the cache
results in the cache handle being transferred to the target `PinnableSlice`
(as opposed to the contents getting copied). With these changes,
it makes sense to reset the `PinnableSlice` storing the blob value in
`DBIter` as soon as we move to a different iterator position to prevent
us from holding on to the cache handle any longer than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10490
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38473630
Pulled By: ltamasi
fbshipit-source-id: 84c045ffac76436c6152fd0f5775b007f4051386
Summary:
The patch adds support for wide-column entities to the existing query
APIs (`Get`, `MultiGet`, and iterator). Namely, when during a query a
wide-column entity is encountered, we will return the value of the default
(anonymous) column as the result. Later, we plan to add wide-column
specific query APIs which will enable retrieving entire wide-column entities
or a subset of their columns.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10483
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38441881
Pulled By: ltamasi
fbshipit-source-id: 6444e79a31aff2470e866698e3a97985bc2b3543
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Current universal compaction picker may cause extra size amplification
compaction if there're more hot data on penultimate level. Improve the picker
to skip the last level for size amp calculation if tiered compaction is
enabled, which can
1. avoid extra unnecessary size amp compaction;
2. typically cold tier (the last level) is not size constrained, so skip size
amp for cold tier is intended;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10467
Test Plan: CI and added unittest
Reviewed By: siying
Differential Revision: D38391350
Pulled By: jay-zhuang
fbshipit-source-id: 103c0731c05e0a7e8f267e9e829d022328be25d2
Summary:
Similarly to https://github.com/facebook/rocksdb/pull/10457, we now have
to explicitly set the `fill_cache` read option when reading blobs in
`DBIter` to prevent the cache from getting polluted by queries with
`fill_cache` set to false. (Before we added support for a blob cache,
the setting had not made any difference either way.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10492
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38476121
Pulled By: ltamasi
fbshipit-source-id: ea5c5e252f83e4a4e2c74156b37d40308d7e0c80
