Summary:
Fix build error: variable 'base_level' may be uninitialized
```
db_impl_compaction_flush.cc:1195:21: error: variable 'base_level' may be uninitialized when used here [-Werror,-Wconditional-uninitialized]
level = base_level;
```
^~~~~~~~~~
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11435
Test Plan: CircleCI jobs
Reviewed By: cbi42
Differential Revision: D45708176
Pulled By: akankshamahajan15
fbshipit-source-id: 851b1205b22b63d728495e5735fa91b0ad8e012b
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
Summary:
Roughly group ReadOptions into those that apply generally and those that only apply to range scans. Also use field assignment idiom to simplify specification of default values.
Also some rearranging to reduce unused padding. sizeof(ReadOptions) was 144 on my system, now 136.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11430
Test Plan: existing tests, no functional change intended
Reviewed By: hx235
Differential Revision: D45626508
Pulled By: pdillinger
fbshipit-source-id: 227d4158c5123405324f273ded2eb9d8bce86364
Summary:
This PR adds a plugin that supports AES-CTR encryption for RocksDB based on highly performant intel open-source cryptographic library IPP-Crypto.
Details:
- supports AES-128, AES-192, and AES-256.
- uses the CTR mode of operation.
- based on the Intel® crypto library -- https://github.com/intel/ipp-crypto.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11429
Reviewed By: cbi42
Differential Revision: D45622342
Pulled By: ajkr
fbshipit-source-id: 2463fa2b8ae625fdd7d83768e274c74e3f2a0f46
Summary:
Document ReadOptions::io_activity as internal-use-only. And to keep kUnknown as last (and why).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11427
Test Plan: comments only
Reviewed By: hx235
Differential Revision: D45576986
Pulled By: pdillinger
fbshipit-source-id: aae15aa22ea91370c2b7366154e45d4b91a79ad2
Summary:
the test is flaky when compiled with `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`. The cause is that a manual compaction `CompactRange()` can finish and return before obsolete files are deleted. One reason for this is that a manual compaction waits until `manual.done` is set here 62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L1978)
and the compaction thread can set `manual.done`:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3672)
and then temporarily release mutex_:
62fc15f009/db/db_impl/db_impl_files.cc (L317)
before purging obsolete files:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3144)
With `COERCE_CONTEXT_SWITCH=1`, `bg_cv_.SignalAll()` is called during `mutex_.Lock()`, so the manual compaction thread can wake up and return before obsolete files are deleted. Updated the test to only count live SST files.
Also updated `FindObsoleteFiles()` to avoid locking a locked mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11412
Test Plan: `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`
Reviewed By: ajkr
Differential Revision: D45342242
Pulled By: cbi42
fbshipit-source-id: 955c9796aa3f484e3557d300f97cffacb3ed9b0c
Summary:
when I use g++-13 to exec the `make all` command, the output throws the warnings.
```
db/compaction/compaction_job_test.cc: In member function ‘void rocksdb::CompactionJobTestBase::AddMockFile(const rocksdb::mock::KVVector&, int)’:
db/compaction/compaction_job_test.cc:376:57: error: redundant move in initialization [-Werror=redundant-move]
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
db/compaction/compaction_job_test.cc:376:57: note: remove ‘std::move’ call
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
cc1plus: all warnings being treated as errors
make: *** [Makefile:2507: db/compaction/compaction_job_test.o] Error 1
```
and I also add some `(void)unused_variable` statements because of the cmake argument `-Wunused-but-set-variable -Wunused-but-set-variable`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11418
Reviewed By: akankshamahajan15
Differential Revision: D45528223
Pulled By: ajkr
fbshipit-source-id: fee1a77c30039a56b481de953f0a834cc788abbc
Summary:
When a DB is opened, RocksDB creates an empty WAL file. When the DB is reopened and the WAL is empty, the min log number to keep is not advanced until a memtable flush happens. If a process crashes soon after reopening the DB, its likely that no memtable flush would have happened, which means the empty WAL file is not deleted. In a crash loop scenario, this leads to empty WAL files accumulating. Fix this by ensuring the min log number is advanced if the WAL is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11409
Test Plan: Add a unit test
Reviewed By: ajkr
Differential Revision: D45281685
Pulled By: anand1976
fbshipit-source-id: 0225877c613e65ffb30972a0051db2830105423e
Summary:
For better clarity, encouraging more options explicitly specified using fields rather than positionally via constructor parameter lists. Simplifies code maintenance as new fields are added. Deprecate some cases of the confusing pattern of NewWhatever() functions returning shared_ptr.
Net reduction of about 70 source code lines (including comments).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11386
Test Plan: existing tests
Reviewed By: ajkr
Differential Revision: D45059075
Pulled By: pdillinger
fbshipit-source-id: d53fa09b268024f9c55254bb973b6c69feebf41a
Summary:
lldb is more supported for Meta infrastructure than gdb, so adding support for it in generating stack traces and attaching debugger on crash. For now you need to set ROCKSDB_LLDB_STACK=1 for stack traces or ROCKSDB_DEBUG=lldb for interactive debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11413
Test Plan: some manual testing (no production code changes)
Reviewed By: ajkr
Differential Revision: D45360952
Pulled By: pdillinger
fbshipit-source-id: 862bc8800eb03e3bdc1be8c0702960a19db45be8
Summary:
Seen in Meta-internal builds that manually depend on rocksdb_whole_archive_lib and want to automatically depend on rocksdb_lib. This change puts rocksdb_lib in the ancestry of rocksdb_whole_archive_lib, and buck2 appears to recognize that even if rocksdb_lib is listed as a separate dependency downstream.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11421
Test Plan: Run failing internal build with the change. See T147085939
Reviewed By: akankshamahajan15
Differential Revision: D45446689
Pulled By: pdillinger
fbshipit-source-id: e8a891fa020dfcf0564b35d30511d70347650fa8
Summary:
The old `StackableDB` based BlobDB implementation relies on a DB listener to track the total size of the SST files in the database and to trigger FIFO eviction. Some test cases in `BlobDBTest` assume that the listener is notified by the time `DB::Flush` returns, which is not guaranteed (side note: `TEST_WaitForFlushMemTable` would not guarantee this either). The patch fixes these tests by using `SyncPoint`s to make sure the listener is actually called before verifying the FIFO behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11417
Test Plan:
```
make -j56 COERCE_CONTEXT_SWITCH=1 blob_db_test
./blob_db_test --gtest_filter=BlobDBTest.FIFOEviction_TriggerOnSSTSizeChange
./blob_db_test --gtest_filter=BlobDBTest.FilterForFIFOEviction
./blob_db_test --gtest_filter=BlobDBTest.FIFOEviction_NoEnoughBlobFilesToEvict
```
Reviewed By: ajkr
Differential Revision: D45407135
Pulled By: ltamasi
fbshipit-source-id: fcd63d76937d2c975f569a6635ce8730772a3d75
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates
Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`
Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.
Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):
```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none
BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE
The readrandom ops/sec looks like the following:
Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB
Main 240805 223604 198176 161653 139040
PR prot_bytes=0 238691 226693 200127 161082 141153
PR prot_bytes=1 214983 193199 178532 137013 108211
prot_bytes=1 vs -10% -15% -10.8% -15% -23%
prot_bytes=0
```
The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287
Reviewed By: ajkr
Differential Revision: D43970708
Pulled By: cbi42
fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
Summary:
Tweak some bounds and things, and reduce risk of surprise results by running on all supported compressions (mostly).
Also improves the precise compressibility of CompressibleString by using RandomBinaryString.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11396
Test Plan: updated tests
Reviewed By: ltamasi
Differential Revision: D45211938
Pulled By: pdillinger
fbshipit-source-id: 9dc1dd8574a60a9364efe18558be66d31a35598b
Summary:
## Option API updates
* Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7.
* Remove unnecessary constructor for CompressionOptions.
* Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated).
## Stat API updates
* Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed.
* Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing.
* New or existing tickers relevant to compression:
* BYTES_COMPRESSED_FROM
* BYTES_COMPRESSED_TO
* BYTES_COMPRESSION_BYPASSED
* BYTES_COMPRESSION_REJECTED
* COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing)
* NUMBER_BLOCK_COMPRESSED (existing)
* NUMBER_BLOCK_COMPRESSION_BYPASSED
* NUMBER_BLOCK_COMPRESSION_REJECTED
* BYTES_DECOMPRESSED_FROM
* BYTES_DECOMPRESSED_TO
We can compute a number of things with these stats:
* "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO
* Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED)
* Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED
* Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES
Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression.
## BlockBasedTableBuilder
Various small refactorings, optimizations, and name clean-ups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388
Test Plan:
unit tests added
* `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field.
Reviewed By: ajkr
Differential Revision: D45128202
Pulled By: pdillinger
fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
Summary:
This happens when the persisted merge operator not a RocksDB built-in one. This PR improves this error message to include the actual persisted merge operator name. when there is a merge_operator mismatch in `SanityCheckCFOptions()`, for example, going from merge operator "CustomMergeOp" to nullptr, an error message like the following is returned:
"failed the verification on ColumnFamilyOptions::merge_operator--- The specified one is nullptr while the **persisted one is nullptr**."
This happens when the persisted merge operator not a RocksDB built-in one. This PR improves this error message to include the actual persisted merge operator name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11393
Test Plan: add unit test to check error message when going from merge op -> nullptr and going from merge op1 to merge op 2.
Reviewed By: ajkr
Differential Revision: D45190131
Pulled By: cbi42
fbshipit-source-id: 67712c2fec29c654c15166d1be985e710e6081e5
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
Summary:
The old cleanup code had a race condition:
1. Test thread: DestroyDB() marked a file as trash
2. DeleteScheduler thread: Got the file's size and decided to delete it in chunks
3. Test thread: DestroyDir() deleted that trash file
4. DeleteScheduler thread: Began deleting in chunks starting by calling ReopenWritableFile(). Unfortunately this recreates the deleted trash file
5. Test thread: DestroyDir() fails to remove the parent directory because it contains the file created in 4.
6. Test thread: Checkpoint::Create() fails due to the directory already existing
It could be repro'd with the following patch/command.
Patch:
```
diff --git a/file/delete_scheduler.cc b/file/delete_scheduler.cc
index 8a2d1615d..337d24a60 100644
--- a/file/delete_scheduler.cc
+++ b/file/delete_scheduler.cc
@@ -317,6 +317,12 @@ Status DeleteScheduler::DeleteTrashFile(const std::string& path_in_trash,
&num_hard_links, nullptr);
if (my_status.ok()) {
if (num_hard_links == 1) {
+ // Give some time for DestroyDir() to delete file entries. Then, the
+ // below `ReopenWritableFile()` will recreate files, preventing the
+ // parent directory from being deleted.
+ if (rand() % 2 == 0) {
+ usleep(1000);
+ }
std::unique_ptr<FSWritableFile> wf;
my_status = fs_->ReopenWritableFile(path_in_trash, FileOptions(), &wf,
nullptr);
diff --git a/file/file_util.cc b/file/file_util.cc
index 43608fcdc..2cee1ad8e 100644
--- a/file/file_util.cc
+++ b/file/file_util.cc
@@ -263,6 +263,13 @@ Status DestroyDir(Env* env, const std::string& dir) {
}
}
+ // Give some time for the DeleteScheduler thread's ReopenWritableFile() to
+ // recreate deleted files
+ if (dir.find("checkpoint") != std::string::npos) {
+ fprintf(stderr, "waiting to destroy %s\n", dir.c_str());
+ usleep(10000);
+ }
+
if (s.ok()) {
s = env->DeleteDir(dir);
// DeleteDir might or might not report NotFound
```
Command:
```
TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=131072 --target_file_size_base=131072 --max_bytes_for_level_base=524288 --checkpoint_one_in=100 --clear_column_family_one_in=0 --max_key=1000 --value_size_mult=33 --sst_file_manager_bytes_per_truncate=4096 --sst_file_manager_bytes_per_sec=1048576 --interval=3 --compression_type=none --sync_fault_injection=1
```
Obviously we don't want to use scheduled deletion here as we need the checkpoint directory deleted immediately. I suspect the DestroyDir() was an attempt to fixup incomplete DestroyDB()s. Now that we expect DestroyDB() to be complete I removed that code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11389
Reviewed By: hx235
Differential Revision: D45137142
Pulled By: ajkr
fbshipit-source-id: 2af743d342c77cc414fd25fc4c9d7c9c6079ad24
Summary:
during manual compaction (CompactRange()), L0->L1 trivial move is disabled when only L0 overlaps with compacting key range (introduced in https://github.com/facebook/rocksdb/issues/7368 to enforce kForce* contract). This can cause large memory usage due to compaction readahead when number of L0 files is large. This PR allows L0->L1 trivial move in this case, and will do a L1 -> L1 intra-level compaction when needed (`bottommost_level_compaction` is kForce*). In brief, consider a DB with only L0 file, and user calls CompactRange(kForce, nullptr, nullptr),
- before this PR, RocksDB does a L0 -> L1 compaction (disallow trivial move),
- after this PR, RocksDB does a L0 -> L1 compaction (allow trivial move), and a L1 -> L1 compaction.
Users can use kForceOptimized to avoid this extra L1->L1 compaction overhead when L0s are overlapping and cannot be trivial moved.
This PR also fixed a bug (see previous discussion in https://github.com/facebook/rocksdb/issues/11041) where `final_output_level` of a manual compaction can be miscalculated when `level_compaction_dynamic_level_bytes=true`. This bug could cause incorrect level being moved when CompactRangeOptions::change_level is specified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11375
Test Plan: - Added new unit tests to test that L0 -> L1 compaction allows trivial move and L1 -> L1 compaction is done when needed.
Reviewed By: ajkr
Differential Revision: D44943518
Pulled By: cbi42
fbshipit-source-id: e9fb770d17b163c18a623e1d1bd6b81159192708
Summary:
Because of this failure with snappy 1.1.8, ROCKSDB_NO_FBCODE=1
```
Value 3531 is not in range [2000, 3525]
table/table_test.cc:4231: Failure
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11384
Test Plan: run updated test in failing configuration
Reviewed By: ajkr
Differential Revision: D45057161
Pulled By: pdillinger
fbshipit-source-id: 397054f08033315e2e2bd9410f1fa32ddbf3b9c8
Summary:
This test exhibited the following flaky failure:
```
db/db_write_test.cc:653: Failure
db_->Resume()
Corruption: Not active
```
I was able to repro it by applying the following patch to coerce a specific race condition:
```
diff --git a/db/db_write_test.cc b/db/db_write_test.cc
index d82c57376..775ba3cde 100644
--- a/db/db_write_test.cc
+++ b/db/db_write_test.cc
@@ -636,6 +636,10 @@ TEST_P(DBWriteTest, LockWALInEffect) {
ASSERT_TRUE(dbfull()->WALBufferIsEmpty());
ASSERT_OK(db_->UnlockWAL());
+ // Test thread: sleep interval: [0, 3)
+ // In this interval, the file system is active
+ sleep(3);
+
// Fail the WAL flush if applicable
fault_fs->SetFilesystemActive(false);
Status s = Put("key2", "value");
@@ -649,6 +653,11 @@ TEST_P(DBWriteTest, LockWALInEffect) {
ASSERT_OK(db_->LockWAL());
ASSERT_OK(db_->UnlockWAL());
}
+
+ // Test thread: sleep interval: [3, 6)
+ // In this interval, the file system is inactive
+ sleep(3);
+
fault_fs->SetFilesystemActive(true);
ASSERT_OK(db_->Resume());
// Writes should work again
diff --git a/db/flush_job.cc b/db/flush_job.cc
index 8193f594f..602ee2c9f 100644
--- a/db/flush_job.cc
+++ b/db/flush_job.cc
@@ -979,6 +979,10 @@ Status FlushJob::WriteLevel0Table() {
DirFsyncOptions(DirFsyncOptions::FsyncReason::kNewFileSynced));
}
TEST_SYNC_POINT_CALLBACK("FlushJob::WriteLevel0Table", &mems_);
+ // Flush thread: sleep interval: [0, 4)
+ // Upon awakening, the file system will be inactive. Then the MANIFEST
+ // update will fail.
+ sleep(4);
db_mutex_->Lock();
}
base_->Unref();
```
The fix for this scenario is explained in the code change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11382
Reviewed By: cbi42
Differential Revision: D45027632
Pulled By: ajkr
fbshipit-source-id: 6bfa35a5781c0c080fb74e13f2b2c9f871f7effb
Summary:
In CircleCI build-linux-arm-test-full job (https://app.circleci.com/pipelines/github/facebook/rocksdb/26462/workflows/a9d39d2c-c970-4b0f-9c10-7743beb9771b/jobs/591722), this test exhibited the following flaky failure:
```
db/db_bloom_filter_test.cc:2506: Failure
Expected: (TestGetTickerCount(options, BLOOM_FILTER_USEFUL)) > (65000 * 2), actual: 120558 vs 130000
```
I ssh'd to an instance and observed it cuts memtables at slightly different points across runs. Logging in `ConcurrentArena` pointed to `try_lock()` returning false at different points across runs.
This PR changes the approach to allow a fixed number of keys per memtable flush. I verified the bloom filter useful count is deterministic now even on the CircleCI ARM instance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11383
Reviewed By: cbi42
Differential Revision: D45036829
Pulled By: ajkr
fbshipit-source-id: b602dacb63955f1af09bf0ed409cde0552805a08
Summary:
When calculating the largest_key in ImportColumnFamilyJob::GetIngestedFileInfo, only the first element of range_del_iter is calculated. If range_del_iter has multiple elements, the largest_key will be wrong
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11381
Reviewed By: cbi42
Differential Revision: D44981450
Pulled By: ajkr
fbshipit-source-id: 584bc7da86295568a96984d2951644f289e578c7
Summary:
Before this PR, in `LevelCompactionBuilder::TryExtendNonL0TrivialMove(index)`, we start from a file at index and expand the compaction input towards right to find files to trivial move. This PR adds the logic to also expand towards left.
Another major change made in this PR is to not expand L0 files through `TryExtendNonL0TrivialMove()`. This happens currently when compacting L0 files to an empty output level. The condition for expanding files in `TryExtendNonL0TrivialMove()` is to check atomic boundary, which does not take into account that L0 files can overlap in key range and are not sorted in key order. So it may include more L0 files than needed and disallow a trivial move. This change is included in this PR so that we don't make it worse by always expanding L0 in both direction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11347
Test Plan:
* new unit test
* Benchmark does not show obvious improvement or regression:
```
Write sequentially
./db_bench --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=1000000 --num=100000000 --value_size=100 -level_compaction_dynamic_level_bytes --target_file_size_base=7340032 --max_bytes_for_level_base=16777216
Main:
fillseq : 4.726 micros/op 211592 ops/sec 472.607 seconds 100000000 operations; 23.4 MB/s
This PR:
fillseq : 4.755 micros/op 210289 ops/sec 475.534 seconds 100000000 operations; 23.3 MB/s
Write randomly
./db_bench --benchmarks=fillrandom --compression_type=lz4 --write_buffer_size=1000000 --num=100000000 --value_size=100 -level_compaction_dynamic_level_bytes --target_file_size_base=7340032 --max_bytes_for_level_base=16777216
Main:
fillrandom : 16.351 micros/op 61159 ops/sec 1635.066 seconds 100000000 operations; 6.8 MB/s
This PR:
fillrandom : 15.798 micros/op 63298 ops/sec 1579.817 seconds 100000000 operations; 7.0 MB/s
```
Reviewed By: ajkr
Differential Revision: D44645650
Pulled By: cbi42
fbshipit-source-id: 8631f3a6b3f01decbbf18c34f2b62833cb4f9733
Summary:
**Context/Summary:**
ASSERT_EQ will only verify the code of Status, but will not check the state message of Status.
- Assert by checking Status state in `ImportColumnFamilyTest`
- Forgot to set db_comparator_name when creating ExportImportFilesMetaData in `ImportColumnFamilyNegativeTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11372
Reviewed By: ajkr
Differential Revision: D45004343
Pulled By: cbi42
fbshipit-source-id: a13d45521df17ead3d6d4c1c1fe1e4c95397ce8b
Summary:
util/ribbon_test.cc: avoid ambiguous reversed operator error in c++20 (and enable checking for the error)
Code would produce errors like this, when compiled with -Wambiguous-reversed-operator under c++20.
```
util/ribbon_test.cc:695:20: error: ISO C++20 considers use of overloaded operator '!=' (with operand types 'KeyGen' (aka '(anonymous namespace)::StandardKeyGen') and 'KeyGen') to be ambiguou
s despite there being a unique best viable function with non-reversed arguments [-Werror,-Wambiguous-reversed-operator]
while (cur != batch_end) {
~~~ ^ ~~~~~~~~~
util/ribbon_test.cc:111:8: note: candidate function with non-reversed arguments
bool operator!=(const StandardKeyGen& other) {
^
util/ribbon_test.cc:107:8: note: ambiguous candidate function with reversed arguments
bool operator==(const StandardKeyGen& other) {
^
```
This will become a hard error in future standards.
Confirmed that no errors were generated when building using clang and c++20:
```
USE_CLANG=1 USE_COROUTINES=1 make
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11371
Reviewed By: meyering
Differential Revision: D44921027
Pulled By: cbi42
fbshipit-source-id: ef25b78260920a4d75a718310688d3a2487ffa87
Summary:
This option is immutable through the life time of the DB open. For now, updating its value between different DB open sessions is also a non compatible change. When I work on support for updating comparator, the type of updates accepted for this option will be supported then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11362
Test Plan: `make check`
Reviewed By: ltamasi
Differential Revision: D44873870
Pulled By: jowlyzhang
fbshipit-source-id: aa02094754b58d99abf9af4c9a8108c1350254cb
Summary:
Makes it easier to use generated Rust bindings. Constness of these is already part of the C++ API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11243
Reviewed By: hx235
Differential Revision: D44840394
Pulled By: ajkr
fbshipit-source-id: bcd1aeb8c959c304148d25b00043bb8c4cd3e0a4
Summary:
The CI systems other than CircleCI are almost always in a failing state. Since CircleCI covers linux, macos, and windows, we can remove the others.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11354
Reviewed By: hx235
Differential Revision: D44774627
Pulled By: ajkr
fbshipit-source-id: c83b298ec5afe4ea410744eda6cc98fc6a3365f1
Summary:
After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it.
This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled.
More detail on production code:
* Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext.
* Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.)
* Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below)
* Improved estimate calculation for num_keys_in_block (see code comment)
Possible follow-up:
* `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true)
* `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses
* `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr`
* Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record
* Expand test coverage (see below)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339
Test Plan:
* Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys.
* Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test.
* Better testing of num_keys_in_block, for now just with MultiGet
* Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test.
Performance test:
Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run.
Base with revert of 11301: 3148926 ops/sec
Base: 3019146 ops/sec
New: 2999529 ops/sec
Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301.
Testing readrandom:
Base with revert of 11301: 2311988
Base: 2281726
New: 2299722
Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population.
Reviewed By: akankshamahajan15
Differential Revision: D44557845
Pulled By: pdillinger
fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
Summary:
If RocksDB enables user-defined timestamp, then RocksDB read path can filter table files by the min/max timestamps of each file. If application wants to lookup a key that is the most recent and visible to a certain timestamp ts, then we can compare ts with the min_ts of each file. If ts < min_ts, then we know all keys in the file is not visible at time ts, then we do not have to open the file. This can also save an IO.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11332
Reviewed By: pdillinger
Differential Revision: D44763497
Pulled By: guowentian
fbshipit-source-id: abde346b9f18480fe03c04e4006e7d62aa9c22a8
Summary:
When a user migrates to level compaction + `level_compaction_dynamic_level_bytes=true`, or when a DB shrinks, there can be unnecessary levels in the DB. Before this PR, this is no way to remove these levels except a manual compaction. These extra unnecessary levels make it harder to guarantee max_bytes_for_level_multiplier and can cause extra space amp. This PR boosts compaction score for these levels to allow RocksDB to automatically drain these levels. Together with https://github.com/facebook/rocksdb/issues/11321, this makes migration to `level_compaction_dynamic_level_bytes=true` automatic without needing user to do a one time full manual compaction. Credit: this PR is modified from https://github.com/facebook/rocksdb/issues/3921.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11340
Test Plan:
- New unit tests
- `python3 tools/db_crashtest.py whitebox --simple` which randomly sets level_compaction_dynamic_level_bytes in each run.
Reviewed By: ajkr
Differential Revision: D44563884
Pulled By: cbi42
fbshipit-source-id: e20d3620bd73dff22be18c5a91a07f340740bcc8
Summary:
VerifyFileChecksums currently interprets the readahead_size as a payload of readahead_size for calculating the checksum, plus a prefetch of an additional readahead_size. Hence each read is readahead_size * 2. This change treats it as chunks of readahead_size for checksum calculation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11328
Test Plan: Add a unit test
Reviewed By: pdillinger
Differential Revision: D44718781
Pulled By: anand1976
fbshipit-source-id: 79bae1ebaa27de2a13bc86f5910bf09356936e63
