Summary: Add db_test2 to .gitignore
Test Plan: make sure db_test2 dont show in "git status"
Reviewers: sdong, yhchiang, andrewkr, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D55191
Summary: Previously, reusing a transaction (by passing it as an argument to BeginTransaction) would not clear the transaction's snapshot. This is not a clear, well-definited behavior.
Test Plan: improved test
Reviewers: sdong, IslamAbdelRahman, horuff, jkedgar
Reviewed By: jkedgar
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55053
Summary: I realized I again is wrong about the naming convention. Let me change it to the correct one.
Test Plan: Run unit tests.
Reviewers: IslamAbdelRahman, kradhakrishnan, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55041
Summary:
Use pure if-then check instead of assert in EraseColumnFamilyInfo
when the specified column family does not found in the cf_info_map_.
So the second deletion will be no op instead of crash.
Test Plan: existing test.
Reviewers: sdong, anthony, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55023
Summary:
Currently, when rocksdb tries to run manual compaction to refit data into a level,
there's a ReFitLevel() process that requires no bg work is currently running.
When RocksDB plans to ReFitLevel(), it will do the following:
1. pause scheduling new bg work.
2. wait until all bg work finished
3. do the ReFitLevel()
4. unpause scheduling new bg work.
However, as it pause scheduling new bg work at step one and waiting for all bg work
finished in step 2, RocksDB will stop flushing until all bg work is done (which
could take a long time.)
This patch fix this issue by changing the way ReFitLevel() pause the background work:
1. pause scheduling compaction.
2. wait until all bg work finished.
3. pause scheduling flush
4. do ReFitLevel()
5. unpause both flush and compaction.
The major difference is that. We only pause scheduling compaction in step 1 and wait
for all bg work finished in step 2. This prevent flush being blocked for a long time.
Although there's a very rare case that ReFitLevel() might be in starvation in step 2,
but it's less likely the case as flush typically finish very fast.
Test Plan: existing test.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55029
Summary: After closely working with Mark, Siying, and Yueh-Hsuan this set of changes reflects the updates needed to measure RocksDB subcompaction performance in a correct manner. The essence of the benchmark is executing `fillrandom` followed by `compact` with the correct set of options for various number of subcompactions specified.
Test Plan: Tested internally to verify correctness and reliability.
Reviewers: sdong, yhchiang, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D55089
Summary:
The call to
```
CaptureCurrentFileNumberInPendingOutputs()
```
should be before
```
versions_->NewFileNumber()
```
Right now we are not actually protecting the file from being deleted
Test Plan: make check
Reviewers: sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54645
Summary:
Now that we get sizes efficiently, we no longer need the workaround to
embed file size in filename.
Test Plan:
$ ./backupable_db_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55035
Summary: We always put compaction to level0_compactions_in_progress_ for universal compaction, so we should also remove it. The bug causes assert failure when running manual compaction.
Test Plan:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom,compact --subcompactions=16 --compaction_style=1
always fails on my host. After the fix, it doesn't fail any more.
Reviewers: IslamAbdelRahman, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55017
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.
Test Plan: Add two unit tests for it.
Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54921
Summary: Now we skip to add boundary keys to subcompaction candidates since we see an empty level. This makes subcompaction almost disabled for universal compaction. We should consider all files instead.
Test Plan: Run existing tests.
Reviewers: IslamAbdelRahman, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55005
Summary: There are a few options in struct DBOptions that aren't handled by options_helper.cc. Add those missing options so they can be used by GetDBOptionsFromString() and friends.
Test Plan: Updated options_test.cc, reran all tests.
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54603
Summary:
For VerifyBackup(), backup files can be spread across "shared/",
"shared_checksum/", and "private/" subdirectories, so we have to
bulk get all three.
For CreateNewBackup(), we make two separate bulk calls: one for the
data files and one for WAL files.
There is also a new helper function, ExtendPathnameToSizeBytes(),
that translates the file attributes vector to a map. I decided to leave
GetChildrenFileAttributes()'s (from D53781) return type as vector to
keep it consistent with GetChildren().
Depends on D53781.
Test Plan:
verified relevant unit tests
$ ./backupable_db_test
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53919
Summary: BlockBasedTableOptions.format_version = 2 uses better encoding format. Now it's the time to make it default.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54879
Summary: 4.5 is already cut, we can now increase the version in 4.6.
Test Plan: Not needed.
Reviewers: anthony, kradhakrishnan, andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54963
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue
Test Plan:
unit test to reproduce the bug
existing unit tests
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54627
Summary: Add a DB Property "rocksdb.current_version_number" for users to monitor version changes and stale iterators.
Test Plan: Add a unit test.
Reviewers: andrewkr, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54927
Summary: After we made manual compaction runnable concurrently with automaticallly compaction, we need to run ComputeCompactionScore() to prepare a coming compaction picking call before the compaction finishes.
Test Plan: Run existing tests.
Reviewers: yhchiang, IslamAbdelRahman, andrewkr, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54891
Summary: Add function to reinitialize a transaction object so that it can be reused. This is an optimization so users can potentially avoid reallocating transaction objects.
Test Plan: added tests
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: jkedgar, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53835
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Fixed two related race conditions in backup creation.
(1) CreateNewBackup() uses DB::DisableFileDeletions() to prevent table files
from being deleted while it is copying; however, the MANIFEST file could still
rotate during this time. The fix is to stop deleting the old manifest in the
rotation logic. It will be deleted safely later when PurgeObsoleteFiles() runs
(can only happen when file deletions are enabled).
(2) CreateNewBackup() did not account for the CURRENT file being mutable.
This is significant because the files returned by GetLiveFiles() contain a
particular manifest filename, but the manifest to which CURRENT refers can
change at any time. This causes problems when CURRENT changes between the call
to GetLiveFiles() and when it's copied to the backup directory. To workaround this, I
manually forge a CURRENT file referring to the manifest filename returned in
GetLiveFiles().
(2) also applies to the checkpointing code, so let me know if this approach is
good and I'll make the same change there.
Test Plan:
new test for roll manifest during backup creation.
running the test before this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
IO error: /tmp/rocksdbtest-9383/backupable_db/MANIFEST-000001: No such file or directory
running the test after this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
[ RUN ] BackupableDBTest.ChangeManifestDuringBackupCreation
[ OK ] BackupableDBTest.ChangeManifestDuringBackupCreation (2836 ms)
Reviewers: IslamAbdelRahman, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54711
Summary:
Based on thread scheduling, DBTestUniversalCompaction.IncreaseUniversalCompactionNumLevels can fail to flush enough files to trigger expected compactions. Fix it by waiting for flush after inserting each key.
There are failrue reported:
db/db_universal_compaction_test.cc:1134: Failure
Expected: (NumTableFilesAtLevel(options.num_levels - 1, 1)) > (0), actual: 0 vs 0
but I can't repro it. Try to fix the bug and see whether it goes away.
Test Plan: Run the test multiple time.
Reviewers: IslamAbdelRahman, anthony, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54747
Summary: This was fixed by 0c2bd5cb
Test Plan: n/a
Reviewers: gabijs
Reviewed By: gabijs
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54753
Summary:
As titled. This fixes the tsan error caused by logger_ being used in
backup_engine_'s destructor. It does not fix the transient unit test failure,
which is caused by MANIFEST file changing while backup is happening.
Test Plan:
verified the tsan error no longer happens on either success or
failure.
$ COMPILE_WITH_TSAN=1 make -j32 backupable_db_test
$ while ./backupable_db_test --gtest_filter=BackupableDBTest.CorruptionsTest ; do : ; done
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54669
Summary: Add a test case in ColumnFamilyTest.ReadDroppedColumnFamily to make sure existing iterator is not impacted by column family dropping.
Test Plan: N/A
Reviewers: igor, yhchiang, anthony, andrewkr, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54657
Summary: DBImpl::SyncWAL() releases db mutex before calling DBImpl::MarkLogsSynced(), while inside DBImpl::MarkLogsSynced() we assert there is none or one outstanding log file. However, a memtable switch can happen in between and causing two or outstanding logs there, failing the assert. The diff adds a unit test that repros the issue and fix the assert so that the unit test passes.
Test Plan: Run the new tests.
Reviewers: anthony, kolmike, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54621
Summary: similar to D52809 add option to exclude zero counters.
Test Plan:
[yiwu@dev4504.prn1 ~/rocksdb] ./iostats_context_test
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from IOStatsContextTest
[ RUN ] IOStatsContextTest.ToString
[ OK ] IOStatsContextTest.ToString (0 ms)
[----------] 1 test from IOStatsContextTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54591
Summary:
There was a race condition in the test where the rolling thread
acquired the mutex before the flush thread pinned the logger. Rather than add
more complicated synchronization to fix it, I followed Siying's suggestion to
use SyncPoint in the test code.
Comments in the LoadDependency() invocation explain the reason for each of the
sync points.
Test Plan:
Ran test 1000 times for tsan/asan. Will wait for all sandcastle tests
to finish before committing since this is a tricky test.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54615
Summary:
This reverts commit 73c31377bb, which mistakenly
reverts 73c31377bb that fixes a bug when both
whole_key_filtering and prefix_extractor are set
Test Plan: revert the patch
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52707
Summary:
We started getting two kinds of crashes since we started using `DB::CompactFiles()`:
(1) `CompactFiles()` fails saying something like "/data/logdevice/4440/shard12/012302.sst: No such file or directory", and presumably makes DB read-only,
(2) DB fails to open saying "Corruption: Can't access /267000.sst: IO error: /data/logdevice/4440/shard1/267000.sst: No such file or directory".
AFAICT, both can be explained by background thread deleting compaction output as "obsolete" while it's being written, before it's committed to manifest. If it ends up committed to the manifest, we get (2); if compaction notices the disappearance and fails, we get (1). The internal tasks t10068021 and t10134177 have some details about the investigation that led to this.
Test Plan: `make -j check`; the new test fails to reopen the DB without the fix
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, sdong
Differential Revision: https://reviews.facebook.net/D54561
Summary:
Relax the check condition of prefix_extractor in CheckOptionsCompatibility
by allowing changing value from non-nullptr to nullptr or nullptr to
non-nullptr.
Test Plan:
options_test
options_util_test
Reviewers: sdong, anthony, IslamAbdelRahman, kradhakrishnan, gunnarku
Reviewed By: gunnarku
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54477
Summary: Recent change break thread_local_test by introducing exception, which is disabled in LITE build. Fix it by disabling exception handling in LITE build.
Test Plan: Build with both of LITE and non-LITE
Reviewers: anthony, IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54513
Summary:
Previously I just slept until the flush_thread was "probably" ready
since proper synchronization in test cases seemed like overkill. But then tsan
complained about it, so I did the synchronization (mostly) properly now.
Test Plan:
$ COMPILE_WITH_TSAN=1 make -j32 auto_roll_logger_test
$ ./auto_roll_logger_test
Reviewers: anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54399
Summary: I have introduced max_allowed_space_ but did not initialize it
Test Plan: make check
Reviewers: sdong, yhchiang, anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54357
Summary:
Remove the SyncPoint usage in the destructor of PosixEnv as none
of any active tests is using it.
SyncPoint is a test-only utility class, and it's a static varible.
As a result, using SyncPoint in the destructor of PosixEnv will
make default Env depends on SyncPoint. Removing such dependency
could solve the problem crash issue only reproducable in Mac
environment.
Test Plan: OPT=-DTRAVIS V=1 make -j4 check on Mac environment
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54333
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Islam AbdelRahman