Summary:
**Context/Summary:**
As titled. Bonus: found that PromoteL0 called with other concurrent PromoteL0 will return non-okay error so clarify the API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12617
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56954428
Pulled By: hx235
fbshipit-source-id: 0e056153c515003fd241ffec59b0d8a27529db4c
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12630
The patch cleans up, improves, and brings into sync (to the extent possible without API signature changes) the sanity checks around the `GetEntity` / `MultiGetEntity` family of APIs, including the read-your-own-writes (`WriteBatchWithIndex`) and transaction layers. The checks are centralized in two main sets of entry points, namely in `DB(Impl)` and the "main" `GetEntityFromBatchAndDB` / `MultiGetEntityFromBatchAndDB` overloads in `WriteBatchWithIndex`. This eliminates the need to duplicate the checks in the transaction classes.
Reviewed By: jaykorean
Differential Revision: D57125741
fbshipit-source-id: 4dd059ef644a9b173fbba767538943397e4cc6cd
Summary:
The state of `saved_seq_for_penul_check_` is not correctly maintained with the current flow. It's supposed to store the original sequence number for a `kTypeValuePreferredSeqno` entry for use in the `DecideOutputLevel` function. However, it's not always properly cleared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12626
Test Plan:
Added unit test that would fail before the fix
./tiered_compaction_test --gtest_filter="*InterleavedTimedPutAndPut*"
Reviewed By: pdillinger
Differential Revision: D57123469
Pulled By: jowlyzhang
fbshipit-source-id: 8d73214b3b6dc152daf19b6bd6ee9063581dc277
Summary:
After https://github.com/facebook/rocksdb/issues/12624 seeing db_stress failures due to db_crashtest.py calling it with --prefixpercent=5 --enable_compaction_filter=1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12627
Test Plan: watch crash test
Reviewed By: ajkr
Differential Revision: D57121592
Pulled By: pdillinger
fbshipit-source-id: 55727355a7662e67efcd22d7e353153e78e24f59
Summary:
In `SaveValue()`, the read lock needs to be obtained before `VerifyEntryChecksum()` because the KV checksum verification reads the entire value metadata+data, which is all mutable when `ColumnFamilyOptions::inplace_update_support == true`.
In `MemTable::Update()`, the write lock needs to be obtained before mutating the value metadata (changing the value size) because it can be read concurrently.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12624
Test Plan:
```
$ make COMPILE_WITH_TSAN=1 -j56 db_stress
...
$ python3 tools/db_crashtest.py blackbox --simple --max_key=10 --inplace_update_support=1 --interval=10 --allow_concurrent_memtable_write=0
```
Reviewed By: cbi42
Differential Revision: D57034571
Pulled By: ajkr
fbshipit-source-id: 3dddf881ad87923143acdf6bfec12ce47bb13a48
Summary:
For manual compaction, FIFO compaction will always skip key range overlapping checking with SST files. If CompactRange() is called with CompactionRangeOptions::change_level=true, a CF with FIFO compaction will now return Status::NotSupported.
For file ingestion, we will always ingest into L0. Previously, it's possible to ingest files into non-L0 levels with FIFO compaction.
These changes also help to fix [this](a178d15baf/db/db_impl/db_impl_compaction_flush.cc (L1269)) assertion failure in crash tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12618
Test Plan: added unit tests to verify the new behavior.
Reviewed By: hx235
Differential Revision: D56962401
Pulled By: cbi42
fbshipit-source-id: 19812a1509650b4162b379ca5bee02f2e9d9569d
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12623
The PR adds support for the `GetEntity` API to optimistic and WriteCommitted pessimistic transactions. `MultiGetEntity` support and the `ForUpdate` variants of these read APIs will be implemented in subsequent PRs.
Reviewed By: jaykorean
Differential Revision: D57030879
fbshipit-source-id: 1f0aed6418782975fe537b6b3d437fad31fcbd43
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12606
The patch extends optimistic transactions and WriteCommitted pessimistic transactions with support for the `PutEntity` API. Similarly to the other APIs, `PutEntity` is available via both the `Transaction` and `TransactionDB` interfaces, where using the latter executes the write in a single-operation transaction as usual. Support for read APIs and other write policies (WritePrepared, WriteUnprepared) will be added in separate PRs.
Reviewed By: jaykorean
Differential Revision: D56911242
fbshipit-source-id: 57cf8bb6c6b1b40ba4a8a652831c13a617644289
Summary:
Previously we skipped syncing the non-latest WALs during memtable flush when the DB had only one column family. Normally that is fine because those non-latest WALs would not be read by recovery. However, in case of `DBOptions::allow_2pc == true`, there could be unmatched prepare records in those WALs making them needed by recovery. As a result, the missing sync could have resulted in the recovered WAL state falling behind the recovered SST state. When we detect that case, we return a `Status::Corruption` saying "SST file is ahead of WALs".
This PR proposes syncing the WAL in case of `DBOptions::allow_2pc`. This introduces the sync in some scenarios where it isn't needed (e.g., non-recent WALs contain no prepares) but I suspect the simplicity is worth it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12622
Reviewed By: cbi42
Differential Revision: D56987303
Pulled By: ajkr
fbshipit-source-id: 7fe9395458018a18d77e907a3b5429065c0e2e48
Summary:
when importing files from multiple CFs into a new CF, we were reusing the epoch numbers assigned by the original CFs. This means L0 files in the new CF can have the same epoch number (assigned originally by different CFs). While CreateColumnFamilyWithImport() requires each original CF to have disjoint key range, after an intra-l0 compaction, we still can end up with L0 files with the same epoch number but overlapping key range. This PR attempt to fix this by reassigning epoch numbers when importing multiple CFs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12602
Test Plan:
a new repro unit test. Before this PR, it fails with
```
[ RUN ] ImportColumnFamilyTest.AssignEpochNumberToMultipleCF
db/import_column_family_test.cc:1048: Failure
db_->WaitForCompact(o)
Corruption: force_consistency_checks(DEBUG): VersionBuilder: L0 files of same epoch number but overlapping range https://github.com/facebook/rocksdb/issues/44 , smallest key: '6B6579303030303030' seq:511, type:1 , largest key: '6B6579303031303239' seq:510, type:1 , epoch number: 3 vs. file https://github.com/facebook/rocksdb/issues/36 , smallest key: '6B6579303030313030' seq:401, type:1 , largest key: '6B6579303030313939' seq:500, type:1 , epoch number: 3
```
Reviewed By: hx235
Differential Revision: D56851808
Pulled By: cbi42
fbshipit-source-id: 01b8c790c9f1f2a168047ead670e73633f705b84
Summary:
This PR fixes a bug in the StderrLogger that truncated the last character in the logline. The problem was that we provided an incorrect max size parameter into the vsnprintf function. The size didn't take into account the null byte that the function automatically adds.
Before fix
```
** File Read Latency Histogram By Level [default] **
2024/05/04-18:50:24.209304 4788 [/db_impl/db_impl.cc:498] Shutdown: canceling all background wor
2024/05/04-18:50:24.209598 4788 [/db_impl/db_impl.cc:692] Shutdown complet
```
After fix
```
** File Read Latency Histogram By Level [default] **
2024/05/04-18:51:19.814584 4d4d [/db_impl/db_impl.cc:498] Shutdown: canceling all background work
2024/05/04-18:51:19.815528 4d4d [/db_impl/db_impl.cc:692] Shutdown complete
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12620
Test Plan:
tested on examples/simple_example.cc with StderrLogger
Fixes: https://github.com/facebook/rocksdb/issues/12576
Reviewed By: jaykorean
Differential Revision: D56972332
Pulled By: ajkr
fbshipit-source-id: 70405e8231ae6e90d24fe0b351bc8e749176bd15
Summary:
Our external benchmark attributed a CPU regression to https://github.com/facebook/rocksdb/issues/11860. Based on the CPU profile the new overhead is from `std::deque`. The deque is always empty for these scans so we do not need to construct it. This PR lazily constructs it only when it is needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12616
Test Plan:
- Command: `TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,seekrandom[-X10] -compression_type=none -disable_auto_compactions=true -write_buffer_size=524288 -value_size=1024 -num=10000 -reads=100000`
- Results
- Before this PR: `seekrandom [AVG 10 runs] : 47811 (± 431) ops/sec`
- After this PR: `seekrandom [AVG 10 runs] : 51013 (± 632) ops/sec`
Reviewed By: jaykorean
Differential Revision: D56954136
Pulled By: ajkr
fbshipit-source-id: b4d34c9b6c6c2e83d4fff06deacb9f0df2ad042f
Summary:
We've seen an internal crash test+sanitizer failure seemingly caused by underflow on `current_num_non_deletions_` which would happen if num_entries < num_deletions. (T186407810)
This change adds an additional check (fail earlier?) and coerces read table properties to satisfy the invariant that is supposed to be provided by https://github.com/facebook/rocksdb/pull/4841 but could be violated by older files, due to
https://github.com/facebook/rocksdb/pull/4016.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12600
Test Plan: existing tests
Reviewed By: ajkr
Differential Revision: D56796191
Pulled By: pdillinger
fbshipit-source-id: 6d22cc40eb74974c42b311293ee2775c6af95afc
Summary:
**Context/Summary:**
As titled. There were two flags serving the same purpose so removed one of them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12610
Test Plan: CI
Reviewed By: jaykorean, ajkr
Differential Revision: D56916119
Pulled By: hx235
fbshipit-source-id: 011140a7945782cc613ca86d4b542db0cf7fb444
Summary:
The test has been flaky for a long time. A recent [failure](https://github.com/facebook/rocksdb/actions/runs/8820808355/job/24215219590?pr=12578) shows that there is still flush running when the assertion fails. I think this is because `WaitForFlushMemTable()` may return before the a flush schedules the next compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12596
Test Plan: I could not repro the failure locally: `gtest-parallel --repeat=8000 --workers=100 ./db_compaction_test --gtest_filter="*CompactionLimiter*"`
Reviewed By: ajkr
Differential Revision: D56715874
Pulled By: cbi42
fbshipit-source-id: f5f64eb30fff7e115c19beedad2dc22afa06258d
Summary:
This PR fixes the following compile errors with Clang:
```
.../rocksdb/env/fs_on_demand.cc:184:5: error: no member named 'for_each' in namespace 'std'; did you mean 'std::ranges::for_each'?
184 | std::for_each(rchildren.begin(), rchildren.end(), [&](std::string& name) {
| ^~~~~~~~~~~~~
| std::ranges::for_each
/opt/homebrew/opt/llvm@17/bin/../include/c++/v1/__algorithm/ranges_for_each.h:68:23: note: 'std::ranges::for_each' declared here
68 | inline constexpr auto for_each = __for_each::__fn{};
| ^
.../rocksdb/env/fs_on_demand.cc:188:10: error: no member named 'sort' in namespace 'std'
188 | std::sort(result->begin(), result->end());
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:189:10: error: no member named 'sort' in namespace 'std'
189 | std::sort(rchildren.begin(), rchildren.end());
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:193:10: error: no member named 'set_union' in namespace 'std'
193 | std::set_union(result->begin(), result->end(), rchildren.begin(),
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:221:5: error: no member named 'for_each' in namespace 'std'; did you mean 'std::ranges::for_each'?
221 | std::for_each(
| ^~~~~~~~~~~~~
| std::ranges::for_each
/opt/homebrew/opt/llvm@17/bin/../include/c++/v1/__algorithm/ranges_for_each.h:68:23: note: 'std::ranges::for_each' declared here
68 | inline constexpr auto for_each = __for_each::__fn{};
| ^
.../rocksdb/env/fs_on_demand.cc:226:10: error: no member named 'sort' in namespace 'std'
226 | std::sort(result->begin(), result->end(), file_attr_sorter);
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:227:10: error: no member named 'sort' in namespace 'std'
227 | std::sort(rchildren.begin(), rchildren.end(), file_attr_sorter);
| ~~~~~^
.../rocksdb/env/fs_on_demand.cc:231:10: error: no member named 'set_union' in namespace 'std'
231 | std::set_union(rchildren.begin(), rchildren.end(), result->begin(),
| ~~~~~^
8 errors generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12588
Reviewed By: jaykorean
Differential Revision: D56656222
Pulled By: ajkr
fbshipit-source-id: 7e94b6250fc9edfe597a61b7622f09d6b6cd9cbd
Summary:
This PR fix the issue that deletion of obsolete files during DB::Open are not rate limited.
The root cause is slow deletion is disabled if trash/db size ratio exceeds the configured `max_trash_db_ratio` d610e14f93/include/rocksdb/sst_file_manager.h (L126) however, the current handling in DB::Open starts with tracking nothing but the obsolete files. This will make the ratio always look like it's 1.
In order for the deletion rate limiting logic to work properly, we should only start deleting files after `SstFileManager` has finished tracking the whole DB, so the main fix is to move these two places that attempts to delete file after the tracking are done: 1) the `DeleteScheduler::CleanupDirectory` call in `SanitizeOptions`, 2) the `DB::DeleteObsoleteFiles` call.
There are some other aesthetic changes like refactoring collecting all the DB paths into a function, rename `DBImp::DeleteUnreferencedSstFiles` to `DBImpl:: MaybeUpdateNextFileNumber` as it doesn't actually delete the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12590
Test Plan: Added unit test and verified with manual testing
Reviewed By: anand1976
Differential Revision: D56830519
Pulled By: jowlyzhang
fbshipit-source-id: 8a38a21b1ea11c5371924f2b88663648f7a17885
Summary:
This also updates WriteBatch's protection info to include write time since there are several places in memtable that by default protects the whole value slice.
This PR is stacked on https://github.com/facebook/rocksdb/issues/12543
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12559
Reviewed By: pdillinger
Differential Revision: D56308285
Pulled By: jowlyzhang
fbshipit-source-id: 5524339fe0dd6c918dc940ca2f0657b5f2111c56
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/12542 introduced a bug where wrong padded bytes used to generate file checksum if flush happens during padding. This PR fixed it along with an existing same bug for `perform_data_verification_=true`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12598
Test Plan:
- New UT that failed before this fix (`db->VerifyFileChecksums: ...Corruption: ...file checksum mismatch`) and passes after
- Benchmark
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillseq[-X300] --num=100000 --block_align=1 --compression_type=none
```
Pre-PR:
fillseq [AVG 300 runs] : 421334 (± 4126) ops/sec; 46.6 (± 0.5) MB/sec
Post-PR: (no regression observed but a slight improvement)
fillseq [AVG 300 runs] : 425768 (± 4309) ops/sec; 47.1 (± 0.5) MB/sec
Reviewed By: ajkr, anand1976
Differential Revision: D56725688
Pulled By: hx235
fbshipit-source-id: c1a700a95def8c65c0a21e44f8c1966164925ad5
Summary:
To make sure `TimedPut` are placed on proper tier before and when it becomes eligible for cold tier
1) flush and compaction need to keep relevant seqno to time mapping for not just the sequence number contained in internal keys, but also preferred sequence number for `TimedPut` entries.
This PR also fix some bugs in for handling `TimedPut` during compaction:
1) dealing with an edge case when a `TimedPut` entry's internal key is the right bound for penultimate level, the internal key after swapping in its preferred sequence number will fall outside of the penultimate range because preferred sequence number is smaller than its original sequence number. The entry however is still safe to be placed on penultimate level, so we keep track of `TimedPut` entry's original sequence number for this check. The idea behind this is that as long as it's safe for the original key to be placed on penultimate level, it's safe for the entry with swapped preferred sequence number to be placed on penultimate level too. Because we only swap in preferred sequence number when that entry is visible to the earliest snapshot and there is no other data points with the same user key in lower levels. On the other hand, as long as it's not safe for the original key to be placed on penultimate level, we will not place the entry after swapping the preferred seqno on penultimate level either.
2) the assertion that preferred seqno is always bigger than original sequence number may fail if this logic is only exercised after sequence number is zeroed out. We adjust the assertion to handle that case too. In this case, we don't swap in the preferred seqno but will adjust the its type to `kTypeValue`.
3) there was a special case handling for when range deletion may end up incorrectly covering an entry if preferred seqno is swapped in. But it missed the case that if the original entry is already covered by range deletion. The original handling will mistakenly output the entry instead of omitting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12543
Test Plan:
./tiered_compaction_test --gtest_filter="PrecludeLastLevelTest.PreserveTimedPutOnPenultimateLevel"
./compaction_iterator_test --gtest_filter="*TimedPut*"
Reviewed By: pdillinger
Differential Revision: D56195096
Pulled By: jowlyzhang
fbshipit-source-id: 37ebb09d2513abbd9e90cda0217e26874584b8f3
Summary:
This feature has been around for a couple of years and users haven't reported any problems with it.
Not quite related: fixed a technical ODR violation in public header for info_log_level in case DEBUG build status changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12377
Test Plan: unit tests updated, already in crash test. Some unit tests are expecting specific behaviors of optimize_filters_for_memory=false and we now need to bake that in.
Reviewed By: jowlyzhang
Differential Revision: D54129517
Pulled By: pdillinger
fbshipit-source-id: a64b614840eadd18b892624187b3e122bab6719c
Summary:
See comment at top of the test case and release note.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12597
Reviewed By: jaykorean
Differential Revision: D56718786
Pulled By: ajkr
fbshipit-source-id: 8dce185bb0d24a358372fc2b553d181793fc335f
Summary:
When `recycle_log_file_num` is changed from 0 to non-zero and the DB is reopened, any log files from the previous session that are still alive get reused. However, the WAL records in those files are not in the recyclable format. If one of those files is reused and is empty, a subsequent re-open, in `RecoverLogFiles`, can replay those records and insert stale data into the memtable. Another manifestation of this is an assertion failure `first_seqno_ == 0 || s >= first_seqno_` in `rocksdb::MemTable::Add`.
We could fix this by either 1) Writing a special record when reusing a log file, or 2) Implement more rigorous checking in `RecoverLogFiles` to ensure we don't replay stale records, or 3) Not reuse files created by a previous DB session. We choose option 3 as its the simplest, and flipping `recycle_log_file_num` is expected to be a rare event.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12591
Test Plan: 1. Add a unit test to verify the bug and fix
Reviewed By: jowlyzhang
Differential Revision: D56655812
Pulled By: anand1976
fbshipit-source-id: aa3a26b4a5e892d39a54b5a0658233cbebebac87
Summary:
Mixed code from `MultiGetCommand` and `GetEntityCommand` to introduce `MultiGetEntityCommand`. Some minor fixes for the related subcommands are included.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12593
Reviewed By: jaykorean
Differential Revision: D56687147
Pulled By: ajkr
fbshipit-source-id: 2ad7b7ba8e05e990b43f2d1eb4990f746ce5f1ea
Summary:
Made `BlockBasedTableOptions::block_align` incompatible (i.e., APIs will return `Status::InvalidArgument`) with more ways of enabling compression: `CompactionOptions::compression`, `ColumnFamilyOptions::compression_per_level`, and `ColumnFamilyOptions::bottommost_compression`. Previously it was only incompatible with `ColumnFamilyOptions::compression`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12592
Reviewed By: hx235
Differential Revision: D56650862
Pulled By: ajkr
fbshipit-source-id: f5201602c2ce436e6d8d30893caa6a161a61f141
Summary:
`nullptr` is typesafe. `0` and `NULL` are not. In the future, only `nullptr` will be allowed.
This diff helps us embrace the future _now_ in service of enabling `-Wzero-as-null-pointer-constant`.
Reviewed By: palmje
Differential Revision: D56650257
fbshipit-source-id: ce628fbf12ea5846bb7103455ab859c5ed7e3598
Summary:
`nullptr` is typesafe. `0` and `NULL` are not. In the future, only `nullptr` will be allowed.
This diff helps us embrace the future _now_ in service of enabling `-Wzero-as-null-pointer-constant`.
Reviewed By: palmje
Differential Revision: D56650296
fbshipit-source-id: ee3491d30e6c1fdefb3010c8ae1104b3f45e70f6
Summary:
I had a TODO to complete `CompactionOptions`'s compression API but never did it: d610e14f93/db/compaction/compaction_picker.cc (L371-L373)
Without solving that TODO, the API remains incomplete and unsafe. Now, however, I don't think it's worthwhile to complete it. I think we should instead delete the API entirely. This PR deprecates it in preparation for deletion in a future major release. The `ColumnFamilyOptions` settings for compression should be good enough for `CompactFiles()` since they are apparently good enough for every other compaction, including `CompactRange()`.
In the meantime, I also changed the default `CompressionType`. Having callers of `CompactFiles()` use Snappy compression by default does not make sense when the default could be to simply use the same compression type that is used for every other compaction. As a bonus, this change makes the default `CompressionType` consistent with the `CompressionOptions` that will be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12587
Reviewed By: hx235
Differential Revision: D56619273
Pulled By: ajkr
fbshipit-source-id: 1477de49f14b06c72d6f0045616a8ce91d97e66e
Summary:
`MultiOpsTxnsStressTest` relies on snapshot which is incompatible with `inplace_update_support`. TransactionDB uses snapshot too so we don't expect it to be used with `inplace_update_support` either.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12586
Test Plan:
```
python3 tools/db_crashtest.py whitebox --[test_multiops_txn|txn] --txn_write_policy=1
```
Reviewed By: hx235
Differential Revision: D56602769
Pulled By: cbi42
fbshipit-source-id: 8778541295f0af71e8ce912c8f872ab5cc607fc1
Summary:
Example failure (cannot reproduce):
```
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBWriteTestInstance/DBWriteTest
[ RUN ] DBWriteTestInstance/DBWriteTest.ConcurrentlyDisabledWAL/0
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
db/db_write_test.cc:809: Failure
dbfull()->SyncWAL()
Not implemented: SyncWAL() is not supported for this implementation of WAL file
[ FAILED ] DBWriteTestInstance/DBWriteTest.ConcurrentlyDisabledWAL/0, where GetParam() = 0 (49 ms)
[----------] 1 test from DBWriteTestInstance/DBWriteTest (49 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (49 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBWriteTestInstance/DBWriteTest.ConcurrentlyDisabledWAL/0, where GetParam() = 0
```
I have no idea why `SyncWAL()` would not be supported from what is presumably a `SpecialEnv` so added more debug info in case it fails again in CI. The last failure was https://github.com/facebook/rocksdb/actions/runs/8731304938/job/23956487511?fbclid=IwAR2jyXgVQtCezri3axV5MwMdI7D6VIudMk1xkiN_FL9-x2dkBv4IqIjjgB4 and it only happened once ever AFAIK.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12580
Reviewed By: hx235
Differential Revision: D56541996
Pulled By: ajkr
fbshipit-source-id: 1eab17567db783c11054fa85dd8b8880eacd3a50
Summary:
**Context/Summary:**
Our crash test recently surfaced incompatibilities between DeleteRange and inplace_update_support. Incorrect read result will be returned after insertion into memtables already contain delete range data.
This PR is to clarify this in API and re-enable `inplace_update_support` in crash test with sanitization.
Ideally there should be a way to check memtable for delete range entry upon put under inplace_update_support = true
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12577
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56492556
Pulled By: hx235
fbshipit-source-id: 9e80e5c69dd708716619a266f41580959680c83b
Summary:
Fixing the failure in IteratorsConsistentViewExplicitSnapshot as shown in https://github.com/facebook/rocksdb/actions/runs/8825927545/job/24230854140?pr=12581
The failure was due to the timing of the `flush()` for the later Column Family in the loop. If the flush for the later CFs installs the new super version before getting the SV for the iterator, assertion succeeds, but if the order flips, SV will be obsolete and assertion can fail.
This PR simplifies the test in a way that we do only one `flush()` so that `SYNC_POINT` can guarantee the order of operations. For ImplicitSnapshot test, it now just triggers flush for the second CF after obtaining SV for the first CF. For the ExplicitSnapshot test, it now triggers atomic flush() for all CFs after obtaining SV for the first CF.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12582
Test Plan:
```
./db_iterator_test --gtest_filter="*IteratorsConsistentView*"
./multi_cf_iterator_test -- --gtest_filter="*ConsistentView*
```
Reviewed By: ajkr, jowlyzhang
Differential Revision: D56557234
Pulled By: jaykorean
fbshipit-source-id: 7aa2f6d0e12a915b6e16cd240389bcfb5b4a5b62
Summary:
As mentioned in https://github.com/facebook/rocksdb/issues/12561 and https://github.com/facebook/rocksdb/issues/12566 , `NewIterators()` API has not been providing consistent view of the db across multiple column families. This PR addresses it by utilizing `MultiCFSnapshot()` function which has been used for `MultiGet()` APIs. To be able to obtain the thread-local super version with ref, `sv_exclusive_access` parameter has been added to `MultiCFSnapshot()` so that we could call `GetReferencedSuperVersion()` or `GetAndRefSuperVersion()` depending on the param and support `Refresh()` API for MultiCfIterators
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12573
Test Plan:
**Unit Tests Added**
```
./db_iterator_test --gtest_filter="*IteratorsConsistentView*"
```
```
./multi_cf_iterator_test -- --gtest_filter="*ConsistentView*"
```
**Performance Check**
Setup
```
make -j64 release
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -benchmarks="filluniquerandom" -key_size=32 -value_size=512 -num=10000000 -compression_type=none
```
Run
```
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -use_existing_db=1 -benchmarks="multireadrandom" -cache_size=10485760000
```
Before the change
```
DB path: [/dev/shm/db_bench/dbbench]
multireadrandom : 6.374 micros/op 156892 ops/sec 6.374 seconds 1000000 operations; (0 of 1000000 found)
```
After the change
```
DB path: [/dev/shm/db_bench/dbbench]
multireadrandom : 6.265 micros/op 159627 ops/sec 6.265 seconds 1000000 operations; (0 of 1000000 found)
```
Reviewed By: jowlyzhang
Differential Revision: D56444066
Pulled By: jaykorean
fbshipit-source-id: 327ce73c072da30c221e18d4f3389f49115b8f99
Summary:
Prior to this PR the following sequence could happen:
1. `RunManualCompaction()` A schedules compaction to thread pool and waits
2. `RunManualCompaction()` B waits without scheduling anything due to conflict
3. `DisableManualCompaction()` bumps `manual_compaction_paused_` and wakes up both
4. `RunManualCompaction()` A (`scheduled && !unscheduled`) unschedules its compaction and marks itself done
5. `RunManualCompaction()` B (`!scheduled && !unscheduled`) schedules compaction to thread pool
6. `RunManualCompaction()` B (`scheduled && !unscheduled`) waits on its compaction
7. `RunManualCompaction()` B at some point wakes up and finishes, either by unscheduling or by compaction execution
8. `DisableManualCompaction()` returns as there are no more manual compactions running
Between 6. and 7. the wait can be long while the compaction sits in the thread pool queue. That wait is unnecessary. This PR changes the behavior from step 5. onward:
5'. `RunManualCompaction()` B (`!scheduled && !unscheduled`) marks itself done
6'. `DisableManualCompaction()` returns as there are no more manual compactions running
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12578
Reviewed By: cbi42
Differential Revision: D56528144
Pulled By: ajkr
fbshipit-source-id: 4da2467376d7d4ff435547aa74dd8f118db0c03b
Summary:
**Context/Summary:**
Our recent crash test failures show inplace_update_support can cause DB to return value inconsistent with expected state upon crash recovery if delete range was used in the previous run AND inplace_update_support=true is used in either previous or the current verification run. Since it's a bit hard to keep track of whether previous run has used delete range or not, I decided to temporarily disable inplace_update_support in crash test to keep crash test stabilized before figuring why these two features are incompatible and how to prevent such combination in crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12574
Test Plan: Rehearsed many stress run with `inplace_update_support=0` and they passed
Reviewed By: jaykorean
Differential Revision: D56454951
Pulled By: hx235
fbshipit-source-id: 57f2ae6308bad7ed4077ddb9e658380742afa293
Summary:
Previously `insert_hints_` was used for both point key table (`table_`) and range deletion table (`range_del_table_`). Hints include pointers to table data, so mixing hints for different tables together without tracking which hint corresponds to which table was problematic. We can just make the hints dedicated to the point key table only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12558
Reviewed By: hx235
Differential Revision: D56279019
Pulled By: ajkr
fbshipit-source-id: 00fe5ce72f9f11a1c1cba5f1977b908b2d518f29
Hui Xiao