Summary:
Mid-point insertion is a useful feature and is mature now. Make it default. Also changed cache_index_and_filter_blocks_with_high_priority=true as default accordingly, so that we won't evict index and filter blocks easier after the change, to avoid too many surprises to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5508
Test Plan: Run all existing tests.
Differential Revision: D16021179
fbshipit-source-id: ce8456e8d43b3bfb48df6c304b5290a9d19817eb
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
When dynamically setting options, we check the option type info and skip options that are marked deprecated. However this check is only done at top level, which results in bugs where SetOptions will corrupt option values and cause unexpected system behavior iff a deprecated second level option is set dynamically.
For exmaple, the following call:
```
dbfull()->SetOptions(
{{"compaction_options_fifo",
"{allow_compaction=true;max_table_files_size=1024;ttl=731;}"}});
```
was from pre 6.0 release when `ttl` was part of `compaction_options_fifo`. Now that it got moved out of `compaction_options_fifo`, this call will incorrectly set `compaction_options_fifo.max_table_files_size` to 731 (as `max_table_files_size` is the first one in `OptionsHelper::fifo_compaction_options_type_info` struct) and cause files to gett evicted much faster than expected.
This PR adds verification to second level options like `compaction_options_fifo.ttl` or `compaction_options_fifo.max_table_files_size` when set dynamically, and filter out those marked as deprecated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5367
Differential Revision: D15530998
Pulled By: miasantreble
fbshipit-source-id: 818258be5c3abe09cd82d62f3c083572d70fecdd
Summary:
In options_helper.cc various functions take a const unordered_map of
string -> TypeInfo for options handling. These functions pass by-value
the (const) maps, resulting in unnecessary copies.
Change to pass by reference.
This results in a noticable reduction in the amount of time spent
parsing options - in my case a set of unit tests using RocksDB which
call SetOptions() to modify options see a ~25% runtime reduction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5295
Differential Revision: D15296334
Pulled By: riversand963
fbshipit-source-id: 4d4be3db635264943607911b296dda27fd7ce1a7
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Right now `OptimizeLevelStyleCompaction` may set compression type to Snappy even when Snappy is not supported, this may cause errors like "no snappy compression support"
Fixes https://github.com/facebook/rocksdb/issues/4283
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4325
Differential Revision: D15125542
Pulled By: miasantreble
fbshipit-source-id: 70890b73ababe16752721555dbd290633c2aafac
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
- By providing the "env" field in any text-based options (i.e., string, map, or file), we can use `NewCustomObject` to deserialize the text value into an actual `Env` object.
- Currently factory functions for `Env` registered with object registry should only return pointer to static `Env` objects. That's because `DBOptions::env` is a raw pointer so we cannot easily delegate cleanup.
- Note I did not add `env` to `db_option_type_info`. It wasn't needed for (de)serialization, and I believe we don't want to do verification on `env`, even by checking name. That's because the user should be able to copy their DB from Linux to Windows, change envs, and not see an option verification error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5237
Differential Revision: D15056360
Pulled By: siying
fbshipit-source-id: 4b5f0b83297a5058f8949ec955dbf27d98d73d7e
Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
Introduce BlockBasedTableOptions::index_shortening to give users control on which key shortening techniques to be used in building index blocks. Before this patch, both separators and successor keys where shortened in indexes. With this patch, the default is set to kShortenSeparators to only shorten the separators. Since each index block has many separators and only one successor (last key), the change should not have negative impact on index block size. However it should prevent many unnecessary block loads where due to approximation introduced by shorted successor, seek would land us to the previous block and then fix it by moving to the next one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5174
Differential Revision: D14884185
Pulled By: al13n321
fbshipit-source-id: 1b08bc8c03edcf09b6b8c16e9a7eea08ad4dd534
Summary:
Change the behavior of OptimizeForSmallDb() so that it is less likely to go out of memory.
Change the behavior of OptimizeForPointLookup() to take advantage of the new memtable whole key filter, and move away from prefix extractor as well as hash-based indexing, as they are prone to misuse.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5165
Differential Revision: D14880709
Pulled By: siying
fbshipit-source-id: 9af30e3c9e151eceea6d6b38701a58f1f9fb692d
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Annotate all of the logging functions to inform the compiler that these
use printf-style formatting arguments. This allows the compiler to emit
warnings if the format arguments are incorrect.
This also fixes many problems reported now that format string checking
is enabled. Many of these are simply mix-ups in the argument type (e.g,
int vs uint64_t), but in several cases the wrong number of arguments
were being passed in which can cause the code to crash.
The primary motivation for this was to fix the log message in
`DBImpl::SwitchMemtable()` which caused a segfault due to an extra %s
format parameter with no argument supplied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5089
Differential Revision: D14574795
Pulled By: simpkins
fbshipit-source-id: 0921b03f0743652bf4ae21e414ff54b3bb65422a
Summary:
Just like ReadOptions::background_purge_on_iterator_cleanup but for ColumnFamilyHandle instead of Iterator.
In our use case we sometimes call ColumnFamilyHandle's destructor from low-latency threads, and sometimes it blocks the thread for a few seconds deleting the files. To avoid that, we can either offload ColumnFamilyHandle's destruction to a background thread on our side, or add this option on rocksdb side. This PR does the latter, to be consistent with how we solve exactly the same problem for iterators using background_purge_on_iterator_cleanup option.
(EDIT: It's avoid_unnecessary_blocking_io now, and affects both CF drops and iterator destructors.)
I'm not quite comfortable with having two separate options (background_purge_on_iterator_cleanup and background_purge_on_cf_cleanup) for such a rarely used thing. Maybe we should merge them? Rename background_purge_on_cf_cleanup to something like delete_files_on_background_threads_only or avoid_blocking_io_in_unexpected_places, and make iterators use it instead of the one in ReadOptions? I can do that here if you guys think it's better.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5043
Differential Revision: D14339233
Pulled By: al13n321
fbshipit-source-id: ccf7efa11c85c9a5b91d969bb55627d0fb01e7b8
Summary:
Allow customized merge operator to be loaded from option file/map/string
by allowing users to pre-regiester merge operators to object registry.
Also update HISTORY.md and header files for the same feature for comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5123
Differential Revision: D14658488
Pulled By: siying
fbshipit-source-id: 86ea2fbd2a0a04632d8ea9fceaffefd041f6ae61
Summary:
Even customized ldb may not be able to read data from some databases if
comparator is not standard. We modify option helper to get comparator from
object registry so that we can use customized ldb to read non-standard
comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5106
Differential Revision: D14622107
Pulled By: siying
fbshipit-source-id: 151dcb295a35a4c7d54f919cd4e322a89dc601c9
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
This reverts commit ee1818081f.
We are not ready to deprecate this feature. revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5034
Differential Revision: D14287246
Pulled By: siying
fbshipit-source-id: e4beafdeaee1c94364fdaa6ba198218d158339f7
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
Store_index_in_file is a less useful feature. To simplify the code to maintain, we are dropping the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4914
Differential Revision: D13791883
Pulled By: siying
fbshipit-source-id: d187c5d662584866103e4b77d09dfb925509ae2e
Summary:
compaction_pri = kMinOverlappingRatio usually provides much better write amplification than the default.
https://github.com/facebook/rocksdb/pull/4907 fixes one shortcome of this option. Make it default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4911
Differential Revision: D13789262
Pulled By: siying
fbshipit-source-id: d90acf8c4dede44f00d183ca4c7a210259378269
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
Add hash index support to data blocks, which helps to reduce the CPU utilization of point-lookup operations. This feature is backward compatible with the data block created without the hash index. It is disabled by default unless `BlockBasedTableOptions::data_block_index_type` is set to `data_block_index_type = kDataBlockBinaryAndHash.`
The DB size would be bigger with the hash index option as a hash table is added at the end of each data block. If the hash utilization ratio is 1:1, the space overhead is one byte per key. The hash table utilization ratio is adjustable using `BlockBasedTableOptions::data_block_hash_table_util_ratio`. A lower utilization ratio will improve more on the point-lookup efficiency, but take more space too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4174
Differential Revision: D8965914
Pulled By: fgwu
fbshipit-source-id: 1c6bae5d1fc39c80282d8890a72e9e67bc247198
Summary:
A framework of trace analyzing for RocksDB
After collecting the trace by using the tool of [PR #3837](https://github.com/facebook/rocksdb/pull/3837). User can use the Trace Analyzer to interpret, analyze, and characterize the collected workload.
**Input:**
1. trace file
2. Whole keys space file
**Statistics:**
1. Access count of each operation (Get, Put, Delete, SingleDelete, DeleteRange, Merge) in each column family.
2. Key hotness (access count) of each one
3. Key space separation based on given prefix
4. Key size distribution
5. Value size distribution if appliable
6. Top K accessed keys
7. QPS statistics including the average QPS and peak QPS
8. Top K accessed prefix
9. The query correlation analyzing, output the number of X after Y and the corresponding average time
intervals
**Output:**
1. key access heat map (either in the accessed key space or whole key space)
2. trace sequence file (interpret the raw trace file to line base text file for future use)
3. Time serial (The key space ID and its access time)
4. Key access count distritbution
5. Key size distribution
6. Value size distribution (in each intervals)
7. whole key space separation by the prefix
8. Accessed key space separation by the prefix
9. QPS of each operation and each column family
10. Top K QPS and their accessed prefix range
**Test:**
1. Added the unit test of analyzing Get, Put, Delete, SingleDelete, DeleteRange, Merge
2. Generated the trace and analyze the trace
**Implemented but not tested (due to the limitation of trace_replay):**
1. Analyzing Iterator, supporting Seek() and SeekForPrev() analyzing
2. Analyzing the number of Key found by Get
**Future Work:**
1. Support execution time analyzing of each requests
2. Support cache hit situation and block read situation of Get
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4091
Differential Revision: D9256157
Pulled By: zhichao-cao
fbshipit-source-id: f0ceacb7eedbc43a3eee6e85b76087d7832a8fe6
Summary:
Added DataBlockIndexType option in BlockBasedTableOptions.
```
enum DataBlockIndexType : char {
kDataBlockBinarySearch = 0, // traditional block type
kDataBlockHashIndex = 1, // additional hash index appended to the end.
};
```
The default type is the traditional binary seek option: `kDataBlockBinarySearch`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4150
Differential Revision: D8895958
Pulled By: fgwu
fbshipit-source-id: 480adef48104cf11d30db3bad9a73f98b4a80c10
Summary:
We forgot to dump FIFO and Universal compaction options to the LOG when any option was dynamically changed via `SetOptions` API. Now added those options also to `MutableCFOptions::Dump`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4140
Differential Revision: D8865634
Pulled By: sagar0
fbshipit-source-id: 05a93e26ab8e72fec6249acccd09b0eb3e1ef0ac
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
Previously in https://github.com/facebook/rocksdb/pull/3601 bloom filter will only be checked if `prefix_extractor` in the mutable_cf_options matches the one found in the SST file.
This PR relaxes the requirement by checking if all keys in the range [user_key, iterate_upper_bound) all share the same prefix after transforming using the BF in the SST file. If so, the bloom filter is considered compatible and will continue to be looked at.
Closes https://github.com/facebook/rocksdb/pull/3899
Differential Revision: D8157459
Pulled By: miasantreble
fbshipit-source-id: 18d17cba56a1005162f8d5db7a27aba277089c41
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
By using WritableFileWriter rather than WritableFile directly, we can buffer multiple Append() calls to one write() file system call, which will be expensive to underlying Env without its own write buffering.
Closes https://github.com/facebook/rocksdb/pull/3882
Differential Revision: D8080673
Pulled By: siying
fbshipit-source-id: e0db900cb3c178166aa738f3985db65e3ae2cf1b
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
In `cf_options_type_info`, the deprecated options are all considered to have offset zero in the `MutableCFOptions` struct. Previously we weren't checking in `GetMutableOptionsFromStrings` whether the provided option was deprecated or not and simply writing the provided value to the offset specified by `cf_options_type_info`. That meant setting any deprecated option would overwrite the first element in the struct, which is `write_buffer_size`. `db_stress` hit this often since it calls `SetOptions` with `soft_rate_limit=0` and `hard_rate_limit=0`, which are both deprecated so cause `write_buffer_size` to be set to zero, which causes it to crash on the following assertion:
```
db_stress: db/memtable.cc:106: rocksdb::MemTable::MemTable(const rocksdb::InternalKeyComparator&, const rocksdb::ImmutableCFOptions&, const rocksdb::MutableCFOptions&, rocksdb::WriteBufferManager*, rocksdb::SequenceNumber, uint32_t): Assertion `!ShouldScheduleFlush()' failed.
```
We fix it by skipping deprecated options (and logging a warning) when users provide them to `SetOptions`. I didn't want to fail the call for compatibility reasons.
Closes https://github.com/facebook/rocksdb/pull/3700
Differential Revision: D7572596
Pulled By: ajkr
fbshipit-source-id: bd5d84e14c0c39f30c5d4c6df7c1503d2c28ecf1
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
enable_pipelined_write was not set in BuildDBOptions() causing its default
value to be dumped in the OPTIONS file
Closes https://github.com/facebook/rocksdb/pull/3585
Differential Revision: D7226395
Pulled By: yiwu-arbug
fbshipit-source-id: 45a659a48d18103ac9ee74bb8805dd0a6ec12474
Summary:
RocksDB should always be able to parse an option file generated using the same or lower version. Unknown option should only happen if it is from a higher version. Change the behavior of RocksDBOptionsParser::Parse()'s behavior with ignore_unknown_options=true so that unknown option from a lower or the same version will never be skipped.
Closes https://github.com/facebook/rocksdb/pull/3527
Differential Revision: D7048851
Pulled By: siying
fbshipit-source-id: e261caea12f6515611a4a29f39acf2b619df2361
Summary:
options/cf_options.cc:
77 memtable_insert_with_hint_prefix_extractor(
CID 1396208 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
2. uninit_member: Non-static class member info_log_level is not initialized in this constructor nor in any functions that it calls.
Closes https://github.com/facebook/rocksdb/pull/3106
Differential Revision: D6874689
Pulled By: sagar0
fbshipit-source-id: b5cd2d13915fd86d87260050f9c5d117615bbe30
Summary:
FIFO and Universal compaction options were recently made dynamic, but I forgot to update these comments. These would mislead anyone who is reading the code.
Closes https://github.com/facebook/rocksdb/pull/3399
Differential Revision: D6786358
Pulled By: sagar0
fbshipit-source-id: 57cfc412f63deaee29bbd82b863304821d60057d
Summary:
Hello and thank you for RocksDB,
While looking into the buffered io used when an `OPTIONS` file is read I noticed the `OPTIONS` files produced by RocksDB 5.8.8 (and head of master) were just over 4096 bytes in size, resulting in the version of glibc I am using (glibc-2.17-196.el7) (on the filesystem used) being passed a 4K buffer for the `fread_unlocked` call and 2 system call reads using a 4096 buffer being used to read the contents of the `OPTIONS` file.
If the buffer size is increased to 8192 then 1 system call read is used to read the contents.
As I think the buffer size is just used for reading `OPTIONS` files, and I thought it likely that `OPTIONS` files have increased in size (as more options are added), I thought I would suggest an increase.
[ If the comments from the top of the `OPTIONS` file are removed, and white space from the start of lines is removed then the size can be reduced to be under 4K, but as more options are added the size seems likely to grow again. ]
Create a new database:
```
> ./ldb --create_if_missing --db=/tmp/rdb_tmp put 1 1
OK
```
The OPTIONS file is 4252 bytes:
```
> stat /tmp/rdb_tmp/OPTIONS* | head -n 2
File: ‘/tmp/rdb_tmp/OPTIONS-000005’
Size: 4252 Blocks: 16 IO Block: 4096 regular file
```
Before, the 4096 byte buffer is used from 2 system read calls:
```
> strace -f ./ldb --try_load_options --db=/tmp/rdb_tmp get DOES_NOT_EXIST 2>&1 |
grep -A 1 'RocksDB option file'
read(3, "# This is a RocksDB option file."..., 4096) = 4096
read(3, "e\n metadata_block_size=4096\n c"..., 4096) = 156
```
ltrace shows 4096 passed to fread_unlocked
```
> ltrace -S -f ./ldb --try_load_options --db=/tmp/rdb_tmp get DOES_NOT_EXIST 2>&1 |
grep -C 3 'RocksDB option file'
[pid 51013] fread_unlocked(0x7ffd5fbf2d50, 1, 4096, 0x7fd2e084e780 <unfinished ...>
[pid 51013] fstat@SYS(3, 0x7ffd5fbf28f0) = 0
[pid 51013] mmap@SYS(nil, 4096, 3, 34, -1, 0) = 0x7fd2e318c000
[pid 51013] read@SYS(3, "# This is a RocksDB option file."..., 4096) = 4096
[pid 51013] <... fread_unlocked resumed> ) = 4096
...
```
After, the 8192 byte buffer is used from 1 system read call:
```
> strace -f ./ldb --try_load_options --db=/tmp/rdb_tmp get DOES_NOT_EXIST 2>&1 | grep -A 1 'RocksDB option file'
read(3, "# This is a RocksDB option file."..., 8192) = 4252
read(3, "", 4096) = 0
```
ltrace shows 8192 passed to fread_unlocked
```
> ltrace -S -f ./ldb --try_load_options --db=/tmp/rdb_tmp get DOES_NOT_EXIST 2>&1 | grep -C 3 'RocksDB option file'
[pid 146611] fread_unlocked(0x7ffcfba382f0, 1, 8192, 0x7fc4e844e780 <unfinished ...>
[pid 146611] fstat@SYS(3, 0x7ffcfba380f0) = 0
[pid 146611] mmap@SYS(nil, 4096, 3, 34, -1, 0) = 0x7fc4eaee0000
[pid 146611] read@SYS(3, "# This is a RocksDB option file."..., 8192) = 4252
[pid 146611] read@SYS(3, "", 4096) = 0
[pid 146611] <... fread_unlocked resumed> ) = 4252
[pid 146611] feof(0x7fc4e844e780) = 1
```
Closes https://github.com/facebook/rocksdb/pull/3294
Differential Revision: D6653684
Pulled By: ajkr
fbshipit-source-id: 222f25f5442fefe1dcec18c700bd9e235bb63491
Summary:
Let me know if more test coverage is needed
Closes https://github.com/facebook/rocksdb/pull/3213
Differential Revision: D6457165
Pulled By: miasantreble
fbshipit-source-id: 3f944abff28aa7775237f1c4f61c64ccbad4eea9
Summary:
The Options header file recommends using max_background_jobs rather than
directly setting max_background_compactions or max_background_flushes.
I've personally seen a performance problem where stalls were happening
because the one background flushing thread was blocked that was fixed
by this change -
https://github.com/cockroachdb/cockroach/issues/19699#issuecomment-347672485
Closes https://github.com/facebook/rocksdb/pull/3208
Differential Revision: D6473178
Pulled By: ajkr
fbshipit-source-id: 67c892ceb7b1909d251492640cb15a0f2262b7ed
Summary:
I started adding gflags support for cmake on linux and got frustrated that I'd need to duplicate the build_detect_platform logic, which determines namespace based on attempting compilation. We can do it differently -- use the GFLAGS_NAMESPACE macro if available, and if not, that indicates it's an old gflags version without configurable namespace so we can simply hardcode "google".
Closes https://github.com/facebook/rocksdb/pull/3212
Differential Revision: D6456973
Pulled By: ajkr
fbshipit-source-id: 3e6d5bde3ca00d4496a120a7caf4687399f5d656
Summary:
Problem: Option string accepts only cache_size as parameter for block_cache which is specified as "block_cache=1M".
It doesn't accept other parameters like num_shards etc.
Changes :
1) ParseBlockBasedTableOption in block_based_table_factory is edited to accept cache options in the format "block_cache=<cache_size>:<num_shard_bits>:<strict_capacity_limit>:<high_pri_pool_ratio>".
Options other than cache_size are optional to maintain backward compatibility. The changes are valid for block_cache_compressed as well.
For example, "block_cache=1M:6:true:0.5", "block_cache=1M:6:true", "block_cache=1M:6" and "block_cache=1M" are all valid option strings.
2) Corresponding unit tests are added.
Closes https://github.com/facebook/rocksdb/pull/3108
Differential Revision: D6420997
Pulled By: sagar0
fbshipit-source-id: cdea8b785688d2802907974af27225ccc1c0cd43
Summary:
Static variables in header files will be instantiated in every file that includes the header file. This patch moves some of them from options_helper.h to its .cc files. It also moves the static variable out of the offset_of since the template function could also lead to multiple instantiation perhaps due to inlining.
Fixes https://github.com/facebook/rocksdb/issues/3176
Closes https://github.com/facebook/rocksdb/pull/3178
Differential Revision: D6363794
Pulled By: maysamyabandeh
fbshipit-source-id: d0a07f061b4d992ab4e0de2706e622131d258fdd
Summary:
The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2).
This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages.
From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff".
This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR.
For now, what's done here according to initial discussions:
Preserving deletes:
- We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion.
- I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum.
- Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum.
Iterator changes:
- couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum.
TableCache changes:
- I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span.
What's left:
- Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type.
Closes https://github.com/facebook/rocksdb/pull/2999
Differential Revision: D6175602
Pulled By: mikhail-antonov
fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
Summary:
GetCommitTimeWriteBatch is currently used to store some state as part of commit in 2PC. In MyRocks it is specifically used to store some data that would be needed only during recovery. So it is not need to be stored in memtable right after each commit.
This patch enables an optimization to write the GetCommitTimeWriteBatch only to the WAL. The batch will be written to memtable during recovery when the WAL is replayed. To cover the case when WAL is deleted after memtable flush, the batch is also buffered and written to memtable right before each memtable flush.
Closes https://github.com/facebook/rocksdb/pull/3071
Differential Revision: D6148023
Pulled By: maysamyabandeh
fbshipit-source-id: 2d09bae5565abe2017c0327421010d5c0d55eaa7
Summary:
228MutableDBOptions::MutableDBOptions()
229 : max_background_jobs(2),
230 base_background_compactions(-1),
231 max_background_compactions(-1),
232 avoid_flush_during_shutdown(false),
233 delayed_write_rate(2 * 1024U * 1024U),
234 max_total_wal_size(0),
235 delete_obsolete_files_period_micros(6ULL * 60 * 60 * 1000000),
236 stats_dump_period_sec(600),
2. uninit_member: Non-static class member bytes_per_sync is not initialized in this constructor nor in any functions that it calls.
CID 1419857 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
4. uninit_member: Non-static class member wal_bytes_per_sync is not initialized in this constructor nor in any functions that it calls.
237 max_open_files(-1) {}
Closes https://github.com/facebook/rocksdb/pull/3069
Differential Revision: D6170424
Pulled By: ajkr
fbshipit-source-id: 1f94e86b87611ad2330b8b1707911150978d68b8
Summary:
- for `SeekToFirst()`, just convert it to a regular `Seek()` if lower bound is specified
- for operations that iterate backwards over user keys (`SeekForPrev`, `SeekToLast`, `Prev`), change `PrevInternal` to check whether user key went below lower bound every time the user key changes -- same approach we use to ensure we stay within a prefix when `prefix_same_as_start=true`.
Closes https://github.com/facebook/rocksdb/pull/3074
Differential Revision: D6158654
Pulled By: ajkr
fbshipit-source-id: cb0e3a922e2650d2cd4d1c6e1c0f1e8b729ff518
Summary:
ColumnFamilyOptions::compaction_options_fifo and all its sub-fields can be set dynamically now.
Some of the ways in which the fifo compaction options can be set are:
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024}"}})`
- `SetOptions({{"compaction_options_fifo", "{ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024;ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=51;ttl=49;allow_compaction=true;}"}})`
Most of the code has been made generic enough so that it could be reused later to make universal options (and other such nested defined-types) dynamic with very few lines of parsing/serializing code changes.
Introduced a few new functions like `ParseStruct`, `SerializeStruct` and `GetStringFromStruct`.
The duplicate code in `GetStringFromDBOptions` and `GetStringFromColumnFamilyOptions` has been moved into `GetStringFromStruct`. So they become just simple wrappers now.
Closes https://github.com/facebook/rocksdb/pull/3006
Differential Revision: D6058619
Pulled By: sagar0
fbshipit-source-id: 1e8f78b3374ca5249bb4f3be8a6d3bb4cbc52f92
Summary:
* make `checksum_type_string_map` available for lite
* comment out `FilesPerLevel` in lite mode.
* travis and legocastle lite build also build `all` target and run tests
Closes https://github.com/facebook/rocksdb/pull/3015
Differential Revision: D6069822
Pulled By: yiwu-arbug
fbshipit-source-id: 9fe92ac220e711e9e6ed4e921bd25ef4314796a0
Summary:
Currently, RocksDB does not allow reopening a preexisting DB with no merge operator defined, with a merge operator defined. This means that if a DB ever want to add a merge operator, there's no way to do so currently.
Fix this by adding a new verification type `kByNameAllowFromNull` which will allow old values to be nullptr, and new values to be non-nullptr.
Closes https://github.com/facebook/rocksdb/pull/2958
Differential Revision: D5961131
Pulled By: lth
fbshipit-source-id: 06179bebd0d90db3d43690b5eb7345e2d5bab1eb
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.
Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885
Differential Revision: D5837843
Pulled By: maysamyabandeh
fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
Summary:
Our current implementation of (semi-)copy constructor of DBOptions and ColumnFamilyOptions seems to intend value by value copy, which is what the default copy constructor does anyway. Moreover not using the default constructor has the risk of forgetting to add newly added options.
As an example, allow_2pc seems to be forgotten in the copy constructor which was causing one of the unit tests not seeing its effect.
Closes https://github.com/facebook/rocksdb/pull/2888
Differential Revision: D5846368
Pulled By: maysamyabandeh
fbshipit-source-id: 1ee92a2aeae93886754b7bc039c3411ea2458683
Summary:
test the `DBOptions(const Options&)` and `ColumnFamilyOptions(const Options&)` constructors. Actually this'll work better once we refactor `RandomInitDBOptions` / `RandomInitCFOptions` to use the authoritative sources of struct members: `db_options_type_info` / `cf_options_type_info` (internal task T21804189 for this).
Closes https://github.com/facebook/rocksdb/pull/2873
Differential Revision: D5817141
Pulled By: ajkr
fbshipit-source-id: 8567c20feced9d1751fdf1f4383e2af30f7e3591
Summary:
currently `ImmutableDBOptions::Dump` use default value for `concurrent_prepare` and `manual_wal_flush`, because DBOptions ctor does not init those member variables.
so in LOG file, it will be
```
Options.concurrent_prepare: 0
Options.manual_wal_flush: 0
```
Closes https://github.com/facebook/rocksdb/pull/2864
Differential Revision: D5816240
Pulled By: ajkr
fbshipit-source-id: 82335e8bcae3dceedc6a99224e7998de5fad1e50
Summary:
useful when debugging to tell whether a DB has stats enabled, and whether a stats object is shared across DBs.
Closes https://github.com/facebook/rocksdb/pull/2813
Differential Revision: D5741755
Pulled By: ajkr
fbshipit-source-id: 9b9d51dee77d14d415cd5da985d8d61b5b3837c3
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Introducing FIFO compactions with TTL.
FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.
To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
- On Flush: Set to the time of flush.
- On Compaction: Set to the max creation_time of all the files involved in the compaction.
- On Repair and Recovery: Set to the time of repair/recovery.
- Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
- the creation_time of all files involved in compaction is 0.
- the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.
This feature is not supported if max_open_files != -1 or with table formats other than Block-based.
**Test Plan:**
Added tests.
**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100
readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found)
```
With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20
readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```
SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480
Differential Revision: D5305116
Pulled By: sagar0
fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
With c7004840d2, it's safe to open a DB with different prefix extractor. So it's safe to skip prefix extractor check.
Closes https://github.com/facebook/rocksdb/pull/2474
Differential Revision: D5294700
Pulled By: siying
fbshipit-source-id: eeb500da795eecb29b8c9c56a14cfd4afda12ecc
Summary:
Added a flag, `ignore_unknown_options`, to skip unknown options when loading an options file (using `LoadLatestOptions`/`LoadOptionsFromFile`) or while verifying options (using `CheckOptionsCompatibility`). This will help in downgrading the db to an older version.
Also added `--ignore_unknown_options` flag to ldb
**Example Use case:**
In MyRocks, if copying from newer version to older version, it is often impossible to start because of new RocksDB options that don't exist in older version, even though data format is compatible.
MyRocks uses these load and verify functions in [ha_rocksdb.cc::check_rocksdb_options_compatibility](e004fd9f41/storage/rocksdb/ha_rocksdb.cc (L3348-L3401)).
**Test Plan:**
Updated the unit tests.
`make check`
ldb:
$ ./ldb --db=/tmp/test_db --create_if_missing put a1 b1
OK
Now edit /tmp/test_db/<OPTIONS-file> and add an unknown option.
Try loading the options now, and it fails:
$ ./ldb --db=/tmp/test_db --try_load_options get a1
Failed: Invalid argument: Unrecognized option DBOptions:: abcd
Passes with the new --ignore_unknown_options flag
$ ./ldb --db=/tmp/test_db --try_load_options --ignore_unknown_options get a1
b1
Closes https://github.com/facebook/rocksdb/pull/2423
Differential Revision: D5212091
Pulled By: sagar0
fbshipit-source-id: 2ec17636feb47dc0351b53a77e5f15ef7cbf2ca7
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350
Differential Revision: D5110648
Pulled By: siying
fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
Summary:
Reorder variables of ReadOptions so that its size is reduced from 64 to 48 bytes.
Closes https://github.com/facebook/rocksdb/pull/2366
Differential Revision: D5124043
Pulled By: siying
fbshipit-source-id: 70e9c204c34f97fad011f2fe2297ba292d85df7a
Summary:
- `max_background_flushes` and `max_background_compactions` are still supported for backwards compatibility
- `base_background_compactions` is completely deprecated. Now we just throttle to one background compaction when there's no pressure.
- `max_background_jobs` is added to automatically partition the concurrent background jobs into flushes vs compactions. Currently it's very simple as we just allocate one-fourth of the jobs to flushes, and the remaining can be used for compactions.
- The test cases that set `base_background_compactions > 1` needed to be updated. I just grab the pressure token such that the desired number of compactions can be scheduled.
Closes https://github.com/facebook/rocksdb/pull/2205
Differential Revision: D4937461
Pulled By: ajkr
fbshipit-source-id: df52cbbd497e13bbc9a60560a5ac2a2526b3f1f9
Summary:
It's hard for RocksDB to come up with a good default of delayed write rate. Use rate given by rate limiter if it is availalbe. This provides the I/O order of magnitude.
Closes https://github.com/facebook/rocksdb/pull/2357
Differential Revision: D5115324
Pulled By: siying
fbshipit-source-id: 341065ad2211c981fc804011c0f0e59a50c7e754
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
First cut for early review; there are few conceptual points to answer and some code structure issues.
For conceptual points -
- restriction-wise, we're going to disallow ingest_behind if (use_seqno_zero_out=true || disable_auto_compaction=false), the user is responsible to properly open and close DB with required params
- we wanted to ingest into reserved bottom most level. Should we fail fast if bottom level isn't empty, or should we attempt to ingest if file fits there key-ranges-wise?
- Modifying AssignLevelForIngestedFile seems the place we we'd handle that.
On code structure - going to refactor GenerateAndAddExternalFile call in the test class to allow passing instance of IngestionOptions, that's just going to incur lots of changes at callsites.
Closes https://github.com/facebook/rocksdb/pull/2144
Differential Revision: D4873732
Pulled By: lightmark
fbshipit-source-id: 81cb698106b68ef8797f564453651d50900e153a
Summary:
Allow an option for users to do some compaction in FIFO compaction, to pay some write amplification for fewer number of files.
Closes https://github.com/facebook/rocksdb/pull/2163
Differential Revision: D4895953
Pulled By: siying
fbshipit-source-id: a1ab608dd0627211f3e1f588a2e97159646e1231
Summary:
Makes max_open_files db option dynamically set-able by SetDBOptions. During the call of SetDBOptions we call SetCapacity on the table cache, which is a LRUCache.
Closes https://github.com/facebook/rocksdb/pull/2185
Differential Revision: D4979189
Pulled By: yiwu-arbug
fbshipit-source-id: ca7e8dc5e3619c79434f579be4847c0f7e56afda
Summary:
Remove double buffering on RandomRead on Windows.
With more logic appear in file reader/write Read no longer
obeys forwarding calls to Windows implementation.
Previously direct_io (unbuffered) was only available on Windows
but now is supported as generic.
We remove intermediate buffering on Windows.
Remove random_access_max_buffer_size option which was windows specific.
Non-zero values for that opton introduced unnecessary lock contention.
Remove Env::EnableReadAhead(), Env::ShouldForwardRawRequest() that are
no longer necessary.
Add aligned buffer reads for cases when requested reads exceed read ahead size.
Closes https://github.com/facebook/rocksdb/pull/2105
Differential Revision: D4847770
Pulled By: siying
fbshipit-source-id: 8ab48f8e854ab498a4fd398a6934859792a2788f
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
index_per_partition should have deprecated deprecated instead of being removed. It is causing backward compatibility issues.
Closes https://github.com/facebook/rocksdb/pull/2173
Differential Revision: D4910947
Pulled By: maysamyabandeh
fbshipit-source-id: 5c52939381847d232ede6866606f67f2b4b857ae
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
