Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.
This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
implementation to return a hint of insert position, which can be later
pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419
Differential Revision: D4079367
Pulled By: yiwu-arbug
fbshipit-source-id: 3555326
Summary:
If FAIL_ON_WARNINGS is OFF, compilation will succeed if there were compile
warnings.
Closes https://github.com/facebook/rocksdb/pull/1446
Differential Revision: D4107825
Pulled By: yiwu-arbug
fbshipit-source-id: 4ce6e05
this breaks the cross-compiling, and we can not assume that the building
machine and the target machine share the same CPU spec.
Signed-off-by: Kefu Chai <kchai@redhat.com>
* util/build_verion.cc.in: add this file, so cmake and make can share the
template file for generating util/build_version.cc.
* CMakeLists.txt: also, cmake v2.8.11 does not support file(GENERATE ...),
so we are using configure_file() for creating build_version.cc.
* Makefile: use util/build_verion.cc.in for creating build_version.cc.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
* enable cmake to work on linux and osx also
* port part of build_detect_platform not covered by thirdparty.inc
to cmake.
- detect fallocate()
- detect malloc_usable_size()
- detect JeMalloc
- detect snappy
* check for asan,tsan,ubsan
* create 'build_version.cc' in build directory.
* add `check` target to support 'make check'.
* add `tools` target to match its counterpart in Makefile.
* use `date` on non-win32 platforms.
* pass different cflags on non-win32 platforms
* detect pthead library using FindThread cmake module.
* enable CMP0042 to silence the cmake warning on osx
* reorder the linked libraries. because testutillib references gtest, to
enable the linker to find the referenced symbols, we need to put gtest
after testutillib.
Signed-off-by: Marcus Watts <mwatts@redhat.com>
Signed-off-by: Kefu Chai <kchai@redhat.com>
* hash_table_bench.cc: fix build without gflags
Signed-off-by: Kefu Chai <kchai@redhat.com>
* remove gtest from librocksdb linkage
testharness.cc is included in librocksdb sources, and it uses gtest. but
gtest is not supposed to be part of the public API of librocksdb. so, in
this change, the testharness.cc is moved out out librocksdb, and is
built as an object target, then linked with the tools and tests instead.
Signed-off-by: Marcus Watts <mwatts@redhat.com>
Signed-off-by: Kefu Chai <kchai@redhat.com>
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
This diff split ThreadPool to
-ThreadPool (abstract interface exposed in include/rocksdb/threadpool.h)
-ThreadPoolImpl (actual implementation in util/threadpool_imp.h)
This allow us to expose ThreadPool to the user so we can use it as an option later
Test Plan: existing unit tests
Reviewers: andrewkr, yiwu, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62085
Summary:
Add mid-point insertion functionality to LRU cache. Caller of `Cache::Insert()` can set an additional parameter to make a cache entry have higher priority. The LRU cache will reserve at most `capacity * high_pri_pool_pct` bytes for high-pri cache entries. If `high_pri_pool_pct` is zero, the cache degenerates to normal LRU cache.
Context: If we are to put index and filter blocks into RocksDB block cache, index/filter block can be swap out too early. We want to add an option to RocksDB to reserve some capacity in block cache just for index/filter blocks, to mitigate the issue.
In later diffs I'll update block based table reader to use the interface to cache index/filter blocks at high priority, and expose the option to `DBOptions` and make it dynamic changeable.
Test Plan: unit test.
Reviewers: IslamAbdelRahman, sdong, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D61977
Summary:
Clock-based cache implemenetation aim to have better concurreny than
default LRU cache. See inline comments for implementation details.
Test Plan:
Update cache_test to run on both LRUCache and ClockCache. Adding some
new tests to catch some of the bugs that I fixed while implementing the
cache.
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61647
Summary:
This is a proof of concept of a RocksDB blob log file. The actual value of the Put() is appended to a blob log using normal data block format, and the handle of the block is written as the value of the key in RocksDB.
The prototype only supports Put() and Get(). It doesn't support DB restart, garbage collection, Write() call, iterator, snapshots, etc.
Test Plan: Add unit tests.
Reviewers: arahut
Reviewed By: arahut
Subscribers: kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61485
Summary: Implement a time series database that supports DateTieredCompactionStrategy. It wraps a db object and separate SST files in different column families (time windows).
Test Plan: Add `date_tiered_test`.
Reviewers: dhruba, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61653
Summary: Add a utility function that trigger necessary full compaction and put output to the correct level by looking at new options and old options.
Test Plan: Add unit tests for it.
Reviewers: andrewkr, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: muthu, sumeet, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60783
Summary:
Experiments on column-aware encodings. Supported features: 1) extract data blocks from SST file and encode with specified encodings; 2) Decode encoded data back into row format; 3) Directly extract data blocks and write in row format (without prefix encoding); 4) Get column distribution statistics for column format; 5) Dump data blocks separated by columns in human-readable format.
There is still on-going work on this diff. More refactoring is necessary.
Test Plan: Wrote tests in `column_aware_encoding_test.cc`. More tests should be added.
Reviewers: sdong
Reviewed By: sdong
Subscribers: arahut, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60027
Summary:
TickersNameMap is not consistent with Tickers enum.
this cause us to report wrong statistics and sometimes to access TickersNameMap outside it's boundary causing crashes (in Fb303 statistics)
Test Plan: added new unit test
Reviewers: sdong, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61083
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
Summary: Refactor cache.cc so that I can plugin clock cache (D55581). Mainly move `ShardedCache` to separate file, move `LRUHandle` back to cache.cc and rename it lru_cache.cc.
Test Plan:
make check -j64
Reviewers: lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59655
Summary:
When write stalls because of auto compaction is disabled, or stop write trigger is reached,
user may change these two options to unblock writes. Unfortunately we had issue where the write
thread will block the attempt to persist the options, thus creating a deadlock. This diff
fix the issue and add two test cases to detect such deadlock.
Test Plan:
Run unit tests.
Also, revert db_impl.cc to master (but don't revert `DBImpl::BackgroundCompaction:Finish` sync point) and run db_options_test. Both tests should hit deadlock.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60627
* Fixed Windows build error in CMakeLists.txt and perf_level error in db_bench_tool.cc
* Changed hard-coded perf levels in db_bench_tool.cc to enum values from perf_level.h
* Replaced remaining FLAGS_perf_level > 0
Summary: It confuses some compilers to have slice.cc under multiple directories. Merge them.
Test Plan: Run existing tests
Reviewers: andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59409
Summary: AFIK, options builder is not used by anyone. Remove it.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, andrewkr, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59319
Summary: Enabled build in Windows and corresponding fixes
Test Plan:
Compile and run persistent_cache_test in Windows and make check in
Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59307
Summary:
This diff provides the basic interface definitions of persistent read
cache system
PersistentCacheOptions captures the persistent read cache options used to
configure and control the system
PersistentCacheTier provides the basic building block for constructing tiered
cache
PersistentTieredCache provides a logical abstraction of tiers of cache layered
over one another
Test Plan: Compile
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57051
Summary:
Extracted basic Env-related tests from mock_env_test and memenv_test into a
parameterized test for Envs: env_basic_test.
Depends on D58449. (The dependency is here only so I can keep this series of
diffs in a chain -- there is no dependency on that diff's code.)
Test Plan: ran tests
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58635
Summary:
This enables configurable Envs without recompiling. For example, my
next diff will make env_test test an Env created by NewEnvFromUri(). Then,
users can determine which Env is tested simply by providing the URI for
NewEnvFromUri() (e.g., through a CLI argument or environment variable).
The registration process allows us to register any Env that is linked with the
RocksDB library, so we can register our internal Envs as well.
The registration code is inspired by our internal InitRegistry.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, lightmark, ldemailly, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D58449
Summary: Add hash table (under persistent cache) to CMake list
Test Plan: Run hash_test in windows and make check in Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59151
Summary: Update CMakeLists.txt for added db_io_failure_test. Depends on D58341
Test Plan: Run make check to see if the tests are working properly.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58671
Summary: Deprecate this one option and delete code and tests that are now superfluous.
Test Plan: all tests pass
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: msalib, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55317
For ease of reuse and customization as a library
without wrapping.
WinEnvThreads is a class for replacement.
WintEnvIO is a class for reuse and behavior override.
Added private virtual functions for custom override
of fallocate pread for io classes.
Summary:
Introduce MaxOperator a simple merge operator that return the max of all operands.
This merge operand help me in benchmarking
Test Plan: Add new unitttests
Reviewers: sdong, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57873
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Conditionally retrofit thread_posix for use with std::thread
and reuse the same logic. Posix users continue using Posix interfaces.
Enable XPRESS compression in test runs.
Fix master introduced signed/unsigned mismatch.
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary:
For testing backups, we needed an Env that is fully isolated from other
Envs on the same machine. Our in-memory Envs (MockEnv and InMemoryEnv) were
insufficient because they don't implement most directory operations.
This diff introduces a new Env, "ChrootEnv", that translates paths such that the
chroot directory appears to be the root directory. This way, multiple Envs can
be isolated in the filesystem by using different chroot directories. Since we
use the filesystem, all directory operations are trivially supported.
Test Plan:
I parameterized the existing EnvPosixTest so it runs tests on ChrootEnv
except the ioctl-related cases.
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57543
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary: Test DBOptionsAllFieldsSettable sometimes fails under valgrind. Move option settable tests to a separate test file and disable it in valgrind..
Test Plan: Run valgrind test and make sure the test doesn't run.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: kradhakrishnan, yiwu, yhchiang, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56529
Summary:
Basic test cases:
- Manifest is lost or corrupt
- Manifest refers to too many or too few SST files
- SST file is corrupt
- Unflushed data is present when RepairDB is called
Depends on D55065 for its CreateFile() function in file_utils
Test Plan: Ran the tests.
Reviewers: IslamAbdelRahman, yhchiang, yoshinorim, sdong
Reviewed By: sdong
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55485
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.
Test Plan: Add two unit tests for it.
Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54921
Summary: similar to D52809 add option to exclude zero counters.
Test Plan:
[yiwu@dev4504.prn1 ~/rocksdb] ./iostats_context_test
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from IOStatsContextTest
[ RUN ] IOStatsContextTest.ToString
[ OK ] IOStatsContextTest.ToString (0 ms)
[----------] 1 test from IOStatsContextTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54591
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary:
I split the db-specific test points out into a separate file under db/
directory. There were also a few bugs to fix in xfunc.{h,cc} that prevented it
from compiling previously; see https://reviews.facebook.net/D36825.
Test Plan:
compilation works now, below command works, will also run "make xfunc".
$ make check ROCKSDB_XFUNC_TEST='managed_new' tests-regexp='DBTest' -j32
Reviewers: sdong, yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53343
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.
Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.
Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52995
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
This is an Env implementation that mirrors all storage-related methods on
two different backend Env's and verifies that they return the same
results (return status and read results). This is useful for implementing
a new Env and verifying its correctness.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary:
This diff is 1/3 in a sequence that introduces a skip list optimized for
a key that is a freshly-allocated const char*. The diff is broken into
pieces to make it easier to review. This piece only introduces the new
type by copying the existing SkipList, with mechanical naming changes
and reformatting.
Test Plan: new unit test
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51279
* conversion from 'size_t' to 'type', by add static_cast
Tested:
* by build solution on Windows, Linux locally,
* run tests
* build CI system successful
Summary:
Under a tailing workload, there were increased block cache
misses when a memtable was flushed because we were rebuilding iterators
in that case since the version set changed. This was exacerbated in the
case of iterate_upper_bound, since file iterators which were over the
iterate_upper_bound would have been deleted and are now brought back as
part of the Rebuild, only to be deleted again. We now renew the iterators
and only build iterators for files which are added and delete file
iterators for files which are deleted.
Refer to https://reviews.facebook.net/D50463 for previous version
Test Plan: DBTestTailingIterator.TailingIteratorTrimSeekToNext
Reviewers: anthony, IslamAbdelRahman, igor, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: yhchiang, march, dhruba, leveldb, lovro
Differential Revision: https://reviews.facebook.net/D50679
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Using a TLS random instance for skiplist makes it smaller
(useful for hash_skiplist_rep) and prepares skiplist for concurrent
adds. This diff also modifies the branching factor math to avoid an
unnecessary division.
This diff has the effect of changing the sequence of skip list node
height choices made by tests, so it has the potential to cause unit
test failures for tests that implicitly rely on the exact structure
of the skip list. Tests that try to exactly trigger a compaction are
likely suspects for this problem (these tests have always been brittle to
changes in the skiplist details). I've minimizes this risk by reseeding
the main thread's Random at the beginning of each test, increasing the
universal compaction size_ratio limit from 101% to 105% for some tests,
and verifying that the tests pass many times.
Test Plan: for i in `seq 0 9`; do make check; done
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50439
Enable C4307 'operator' : integral constant overflow
Longs and ints on Windows are 32-bit hence the overflow
Enable C4309 'conversion' : truncation of constant value
Enable C4512 'class' : assignment operator could not be generated
Enable C4701 Potentially uninitialized local variable 'name' used
Summary:
This patch introduces OptionsSanityCheckLevel internally to enable
sanity check rocksdb options.
Utilities API will be added in the follow-up diffs.
Test Plan: Added more tests in options_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49515
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
C4101 'identifier' : unreferenced local variable
C4189 'identifier' : local variable is initialized but not referenced
C4100 'identifier' : unreferenced formal parameter
C4296 'operator' : expression is always false
Summary:
The goal of this diff is to create a simple stress test with focus on catching:
* bugs in compaction/flush processes, especially the ones that cause assertion errors
* bugs in the code that deletes obsolete files
There are two parts of the test:
* write_stress, a binary that writes to the database
* write_stress_runner.py, a script that invokes and kills write_stress
Here are some interesting parts of write_stress:
* Runs with very high concurrency of compactions and flushes (32 threads total) and tries to create a huge amount of small files
* The keys written to the database are not uniformly distributed -- there is a 3-character prefix that mutates occasionally (in prefix mutator thread), in such a way that the first character mutates slower than second, which mutates slower than third character. That way, the compaction stress tests some interesting compaction features like trivial moves and bottommost level calculation
* There is a thread that creates an iterator, holds it for couple of seconds and then iterates over all keys. This is supposed to test RocksDB's abilities to keep the files alive when there are references to them.
* Some writes trigger WAL sync. This is stress testing our WAL sync code.
* At the end of the run, we make sure that we didn't leak any of the sst files
write_stress_runner.py changes the mode in which we run write_stress and also kills and restarts it. There are some interesting characteristics:
* At the beginning we divide the full test runtime into smaller parts -- shorter runtimes (couple of seconds) and longer runtimes (100, 1000) seconds
* The first time we run write_stress, we destroy the old DB. Every next time during the test, we use the same DB.
* We can run in kill mode or clean-restart mode. Kill mode kills the write_stress violently.
* We can run in mode where delete_obsolete_files_with_fullscan is true or false
* We can run with low_open_files mode turned on or off. When it's turned on, we configure table cache to only hold a couple of files -- that way we need to reopen files every time we access them.
Another goal was to create a stress test without a lot of parameters. So tools/write_stress_runner.py should only take one parameter -- runtime_sec and it should figure out everything else on its own.
In a separate diff, I'll add this new test to our nightly legocastle runs.
Test Plan:
The goal of this test was to retroactively catch the following bugs: D33045, D48201, D46899, D42399. I failed to reproduce D48201, but all others have been caught!
When i reverted https://reviews.facebook.net/D33045:
./write_stress --runtime_sec=200 --low_open_files_mode=true
Iterator statuts not OK: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/089166.sst: No such file or directory
When i reverted https://reviews.facebook.net/D42399:
python tools/write_stress_runner.py --runtime_sec=5000
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1
Running write_stress, will kill after 2 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 7 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 8 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --low_open_files_mode=true
Write to DB failed: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/019250.sst: No such file or directory
ERROR: write_stress died with exitcode=-6
When i reverted https://reviews.facebook.net/D46899:
python tools/write_stress_runner.py --runtime_sec=1000
runtime: 1000
Going to execute write stress for [3, 3, 100, 3, 2, 100, 1, 788]
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --low_open_files_mode=true
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 100 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
write_stress: db/db_impl.cc:2070: void rocksdb::DBImpl::MarkLogsSynced(uint64_t, bool, const rocksdb::Status&): Assertion `log.getting_synced' failed.
ERROR: write_stress died with exitcode=-6
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, sdong, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49533
Test code errors are currently blocking Windows Release builew
We do not want spend time building in Release what we can not run
We want to eliminate a source of most frequent errors when people
check-in test only code which can not be built in Release.
This feature will work only if you invoke msbuild against rocksdb.sln
Invoking it against ALL_BUILD target will attempt to build everything.
* add validation is git found
* add validation is .git folder exists in project (project zip archive download without .git folder)
* get head commit SHA if git found and .git folder exists
Tested:
* configure project by CMake 3.0.0 successfully (with and without git), with project zip archive (without .git folder) and with project cloned from github
* configure project by command: cmake -G "Visual Studio 12 Win64"
* build solution by Visual Studio
* manually validate that file utils/build_version.cc contains valid head revision value
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
We are cleaning up dependencies.
This diff takes a first step at moving memtable files to their own
directory called memtable. In future diffs, we will move other memtable
files from db to memtable.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48915
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
* add -C ${CMAKE_CURRENT_SOURCE_DIR} to git can found revision from current source directory
Tested:
* configure project by CMake 3.0.0 successfully
* configure project by command: cmake -G "Visual Studio 12 Win64"
* build solution by Visual Studio
* manually validate that file utils/build_version.cc contains valid head revision value
Summary: manual_compaction_test.cc incorrectly in util. Moved to db.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48687
Summary:
As part of tech debt week, we are cleaning up dependencies.
This diff moves db_test_util.[h,cc] from util to db directory.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48543
Summary:
This patch defines the format of RocksDB options file, which
follows the INI file format, and implements functions for its
serialization and deserialization. An example RocksDB options
file can be found in examples/rocksdb_option_file_example.ini.
A typical RocksDB options file has three sections, which are
Version, DBOptions, and more than one CFOptions. The RocksDB
options file in general follows the basic INI file format
with the following extensions / modifications:
* Escaped characters
We escaped the following characters:
- \n -- line feed - new line
- \r -- carriage return
- \\ -- backslash \
- \: -- colon symbol :
- \# -- hash tag #
* Comments
We support # style comments. Comments can appear at the ending
part of a line.
* Statements
A statement is of the form option_name = value.
Each statement contains a '=', where extra white-spaces
are supported. However, we don't support multi-lined statement.
Furthermore, each line can only contain at most one statement.
* Section
Sections are of the form [SecitonTitle "SectionArgument"],
where section argument is optional.
* List
We use colon-separated string to represent a list.
For instance, n1:n2:n3:n4 is a list containing four values.
Below is an example of a RocksDB options file:
[Version]
rocksdb_version=4.0.0
options_file_version=1.0
[DBOptions]
max_open_files=12345
max_background_flushes=301
[CFOptions "default"]
[CFOptions "the second column family"]
[CFOptions "the third column family"]
Test Plan: Added many tests in options_test.cc
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46059
Add an optimized build config switch for faster test runs
Change compiler options to introduce more opitmizations and be more inline with MS internal switches.
Make appveyor build to utilize all the avaiable cores on the VM (parallel)
Introduce new appveyor configuration for daily test runs as it would take too long
to run db_test after each checkin even in paralell.
With some exclusions we make it in 38 minutes. We currently fail to install ramdisk during the build.
Add a powershell script to faicilitate paralell run for db_test cases.
Summary:
Fix hex2String performance issues by removing sscanf dependency.
Also fixed some edge case handling (odd length, bad input).
Test Plan: Created a test file which called old and new implementation, and validated results are the same. I'll paste results in the phabricator diff.
Reviewers: igor, rven, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: thatsafunnyname, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46785
Summary:
Builder and CompactionJob share a lot of fairly complex code. This patch
refactors this code into a separate class, the CompactionIterator. Because the
shared code is fairly complex, this patch hopefully improves maintainability.
While there are is a lot of potential for further improvements, the patch is
intentionally pretty close to the original structure because the change is
already complex enough.
Test Plan: make clean all check && ./db_stress
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46197
Summary:
Prototype of API to allow MyRocks to override default Mutex/CondVar used by transactions with their own implementations. They would simply need to pass their own implementations of Mutex/CondVar to the templated TransactionDB::Open().
Default implementation of TransactionDBMutex/TransactionDBCondVar provided (but the code is not currently changed to use this).
Let me know if this API makes sense or if it should be changed
Test Plan: n/a
Reviewers: yhchiang, rven, igor, sdong, spetrunia
Reviewed By: spetrunia
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43761
Summary: Provide a way to specify a detailed static error message for a Status without incurring a memcpy. Let me know what people think of this approach.
Test Plan: added simple test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44259
Summary:
As I keep adding new features to transactions, I keep creating more duplicate code. This diff cleans this up by creating a base implementation class for Transaction and OptimisticTransaction to inherit from.
The code in TransactionBase.h/.cc is all just copied from elsewhere. The only entertaining part of this class worth looking at is the virtual TryLock method which allows OptimisticTransactions and Transactions to share the same common code for Put/Get/etc.
The rest of this diff is mostly red and easy on the eyes.
Test Plan: No functionality change. existing tests pass.
Reviewers: sdong, jkedgar, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45135
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: util/delete_scheduler_impl.cc is missing CMakeLists.txt, which fails Windows build. Add it.
Test Plan: Build in both of Windows and Linux
Reviewers: anthony, rven, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43641
Summary:
Add two unit tests for SyncWAL(). One makes sure SyncWAL() doesn't block writes in the other thread. Another one makes sure SyncWAL() doesn't wait ongoing writes to finish before being executed.
Create a new test file db_wal_test and move two WAL related tests from db_test to here.
Test Plan: Run the new tests
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, kolmike, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43605
Summary:
This diff adds CompactOnDeletionCollector in utilities/table_properties_collectors,
which applies a sliding window to a sst file and mark this file as need-compaction
when it observe enough deletion entries within the consecutive keys covered by
the sliding window.
Test Plan: compact_on_deletion_collector_test
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yoshinorim, sdong
Reviewed By: sdong
Subscribers: maykov, dhruba
Differential Revision: https://reviews.facebook.net/D41175
Summary:
From other ones' investigation:
"sync_file_range() behavior highly depends on kernel version and filesystem.
xfs does neighbor page flushing outside of the specified ranges. For example, sync_file_range(fd, 8192, 16384) does not only trigger flushing page #3 to #4, but also flushing many more dirty pages (i.e. up to page#16)... Ranges of the sync_file_range() should be far enough from write() offset (at least 1MB)."
Test Plan: make all check
Reviewers: igor, rven, kradhakrishnan, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: yoshinorim, MarkCallaghan, sumeet, domas, dhruba, leveldb, ljin
Differential Revision: https://reviews.facebook.net/D15807
Summary: Move general compaction tests from db_test.cc to db_compaction_test.cc
Test Plan:
db_test
db_compaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42651
Summary: Add missing db_log_iter_test in the test list
Test Plan: make all check
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42663
- Remove make file defines from public headers and use _WIN32 because it is compiler defined
- use __GNUC__ and __clang__ to guard non-portable attributes
- add #include "port/port.h" to some new .cc files.
- minor changes in CMakeLists to reflect recent changes
Summary: Moved convenience.h out of utilities to remove a dependency on utilities in db.
Test Plan: unit tests. Also compiled a link to the old location to verify the _Pragma works.
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42201
Summary: Move UniversalCompaction related db-tests to db_universal_compaction_test.cc
Test Plan:
db_test
db_universal_compaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42225
Summary: Make TransactionLogIterator related tests from db_test.cc to db_log_iter_test.cc
Test Plan:
db_test
db_log_iter_test
Reviewers: sdong, IslamAbdelRahman, igor, anthony
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42045
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
