It seems that on some FS we get more blocks than we ask for. This is
already handled when checking the allocated number of blocks, but
after the file is closed it checks for an exact number of blocks,
which fails on my machine.
I changed the test to add one full page to the size, then calculate
the expected number of blocks and check if the actual number of blocks
is less or equal to that.
Summary:
With the patch, thread pool size will be automatically increased if DB's options ask for more parallelism of compactions or flushes.
Too many users have been confused by the API. Change it to make it harder for users to make mistakes
Test Plan: Add two unit tests to cover the function.
Reviewers: yhchiang, rven, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27555
Summary:
TestMemEnv simulates all Env APIs using in-memory data structures.
We can use it to speed up db_test run, which is now reduced ~7mins when it is
enabled.
We can also add features to simulate power/disk failures in the next
step
TestMemEnv is derived from helper/mem_env
mem_env can not be used for rocksdb since some of its APIs do not give
the same results as env_posix. And its file read/write is not thread safe
Test Plan:
make all -j32
./db_test
./env_mem_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28035
Summary:
ftruncate does not always free preallocated unused space at the end of file.
In some cases, we pin too much disk space than it should
Test Plan: env_test
Reviewers: sdong, rven, yhchiang, igor
Reviewed By: igor
Subscribers: nkg-, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25641
Summary: RocksDB already depends on C++11, so we might as well all the goodness that C++11 provides. This means that we don't need AtomicPointer anymore. The less things in port/, the easier it will be to port to other platforms.
Test Plan: make check + careful visual review verifying that NoBarried got memory_order_relaxed, while Acquire/Release methods got memory_order_acquire and memory_order_release
Reviewers: rven, yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D27543
Summary:
Now the file summary is too small for printing. Enlarge it.
To enable it, allow to pass a size to log buffer.
Test Plan:
Add a unit test.
make all check
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21723
Summary: To avoid false positive test failures when the file system doesn't support fallocate. In EnvTest.AllocateTest, we first make a simple fallocate call and check the error codes to rule out the possibility that it is not supported. Skip the test if the error code indicates it is not supported.
Test Plan: Run the test and make sure it passes on file systems supporting and not supporting fallocate
Reviewers: yhchiang, ljin, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23667
Summary:
Lots of travis builds are failing because on EnvPosixTest.RandomAccessUniqueID: https://travis-ci.org/facebook/rocksdb/builds/34400833
This is the result of their environment and not because of RocksDB's bug.
Also note that RocksDB works correctly even though UniqueID feature is not present in the system (as it's the case with os x)
Test Plan:
OPT=-DTRAVIS make env_test && ./env_test
Observed that offending tests are not being run
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22803
Summary:
Add a feature to decrease the number of threads in thread pool.
Also instantly schedule more threads if number of threads is increased.
Here is the way it is implemented: each background thread needs its thread ID. After decreasing number of threads, all threads are woken up. The thread with the largest thread ID will terminate. If there are more threads to terminate, the thread will wake up all threads again.
Another change is made so that when number of threads is increased, more threads are created and all previous excessive threads are woken up to do the work.
Test Plan: Add a unit test.
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: yhchiang, igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D18675
Summary: For some reason, on a subset of our continuous build machines, preallocation is allocating 8 block more than it should be. Let's relax the test a little bit -- now we require the test to allocate *at least* the number of blocks as we told them to.
Test Plan: no
Reviewers: ljin, haobo, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18141
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary: LogBuffer::AddLogToBuffer() uses vsnprintf() in the wrong way, which might cause buffer overflow when log line is too line. Fix it.
Test Plan: Add a unit test to cover most LogBuffer's most logic.
Reviewers: igor, haobo, dhruba
Reviewed By: igor
CC: ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17103
Summary: Add a function to Env so that users can query the waiting queue length of each thread pool
Test Plan: add a test in env_test
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, igor, yhchiang, ljin, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D16755
Summary:
Blocks allocated with fallocate will take extra space on disk even if they are unused and the file is close.
Now we remove the extra blocks at the end of the file by calling `ftruncate`.
Test Plan: added a test to env_test
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16647
Summary:
With the use of tmpfs or ramfs, unit tests related to GetUniqueID()
failed because of the failure from ioctl, which doesn't work with these
fancy file systems at all.
I fixed this issue and make sure all related tests run on the "regular"
storage (disk or flash).
Test Plan: TEST_TMPDIR=/dev/shm make check -j32
Reviewers: igor, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16593
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary:
tmpfs might not support fallocate(). Fix unit test so that this
does not cause a unit test to fail.
Test Plan: ./env_test
Reviewers: emayanke, igor, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13455
Summary: I have implemented basic simple use case that I need for External Value Store I'm working on. There is a potential for making this prettier by refactoring/combining WritableFile and RandomAccessFile, avoiding some copypasta. However, I decided to implement just the basic functionality, so I can continue working on the other diff.
Test Plan: Added a unittest
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13365
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary:
Added a new api to the Environment that allows clearing out not-needed
pages from the OS cache. This will be helpful when the compressed
block cache replaces the OS cache.
Test Plan: EnvPosixTest.InvalidateCache
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13041
Summary: move the TwoPools test to the end of thread related tests. Otherwise, the SetBackgroundThreads call would increase the Low pool size and affect the result of other tests.
Test Plan: make env_test; ./env_test
Reviewers: dhruba, emayanke, xjin
Reviewed By: xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12939
Summary:
this is the ground work for separating memtable flush jobs to their own thread pool.
Both SetBackgroundThreads and Schedule take a third parameter Priority to indicate which thread pool they are working on. The names LOW and HIGH are just identifiers for two different thread pools, and does not indicate real difference in 'priority'. We can set number of threads in the pools independently.
The thread pool implementation is refactored.
Test Plan: make check
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12885
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary:
Added function to `RandomAccessFile` to generate an unique ID for that file. Currently only `PosixRandomAccessFile` has this behaviour implemented and only on Linux.
Changed how key is generated in `Table::BlockReader`.
Added tests to check whether the unique ID is stable, unique and not a prefix of another unique ID. Added tests to see that `Table` uses the cache more efficiently.
Test Plan: make check
Reviewers: chip, vamsi, dhruba
Reviewed By: chip
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8145
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
