Summary:
Having a synthetic implementation of `TimedWait()` in `SystemClock` will allow us to add `SyncPoint`s while mutex is released, which was previously impossible since the lock was released and reacquired all within `pthread_cond_timedwait()`. Additionally, integrating `TimedWait()` with `MockSystemClock` allows us to cleanup some workarounds in the test code. In this PR I only cleaned up the `GenericRateLimiter` test workaround.
This is related to the intended follow-up mentioned in https://github.com/facebook/rocksdb/issues/7101's description. There are a couple differences:
(1) This PR does not include removing the particular workaround that initially motivated it. Actually, the `Timer` class uses `InstrumentedCondVar`, so the interface introduced here is inadequate to remove that workaround. On the bright side, the interface introduced in this PR can be changed as needed since it can neither be used nor extended externally, due to using forward-declared `port::CondVar*` in the interface.
(2) This PR only makes the change in `SystemClock` not `Env`. Older revisions of this PR included `Env::TimedWait()` and `SpecialEnv::TimedWait()`; however, since they were unused it probably makes sense to defer adding them until when they are needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11753
Reviewed By: pdillinger
Differential Revision: D48654995
Pulled By: ajkr
fbshipit-source-id: 15e19f2454b64d4ec7f50e328691c66ca9911122
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
Context:
This pull request update is in response to a comment made on https://github.com/facebook/rocksdb/pull/8596#discussion_r680264932. The current implementation of RefillBytesAndGrantRequestsLocked() drains all available_bytes, but the first request after the last wave of requesting/bytes granting is done is not being handled in the same way.
This creates a scenario where if a request for a large amount of bytes is enqueued first, but there are not enough available_bytes to fulfill it, the request is put to sleep until the next refill time. Meanwhile, a later request for a smaller number of bytes comes in and is granted immediately. This behavior is not fair as the earlier request was made first.
To address this issue, we have made changes to the code to exhaust the remaining available bytes from the request and queue the remaining. With this change, requests are granted in the order they are received, ensuring that earlier requests are not unfairly delayed by later, smaller requests. The specific scenario described above will no longer occur with this change. Also consolidated `granted` and `request_bytes` as part of the change since `granted` is equivalent to `request_bytes == 0`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11425
Test Plan: Added `AvailableByteSizeExhaustTest`
Reviewed By: hx235
Differential Revision: D45570711
Pulled By: jaykorean
fbshipit-source-id: a7117ed17bf4b8a7ae0f76124cb41902db1a2592
Summary:
Made locking strict for all accesses of `GenericRateLimiter` internal state.
`SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation.
The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374
Reviewed By: pdillinger
Differential Revision: D37906367
Pulled By: ajkr
fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5
Summary:
(PR created for informational/testing purposes only.)
- Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()`
- Benefit over #10374 is eliminating race conditions with Configurable framework.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378
Reviewed By: pdillinger
Differential Revision: D37914865
fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
**Context:**
Some existing internal calls of `GenericRateLimiter::Request()` in backupable_db.cc and newly added internal calls in https://github.com/facebook/rocksdb/pull/8722/ do not make sure `bytes <= GetSingleBurstBytes()` as required by rate_limiter https://github.com/facebook/rocksdb/blob/master/include/rocksdb/rate_limiter.h#L47.
**Impacts of this bug include:**
(1) In debug build, when `GenericRateLimiter::Request()` requests bytes greater than `GenericRateLimiter:: kMinRefillBytesPerPeriod = 100` byte, process will crash due to assertion failure. See https://github.com/facebook/rocksdb/pull/9063#discussion_r737034133 and for possible scenario
(2) In production build, although there will not be the above crash due to disabled assertion, the bug can lead to a request of small bytes being blocked for a long time by a request of same priority with insanely large bytes from a different thread. See updated https://github.com/facebook/rocksdb/wiki/Rate-Limiter ("Notice that although....the maximum bytes that can be granted in a single request have to be bounded...") for more info.
There is an on-going effort to move rate-limiting to file wrapper level so rate limiting in `BackupEngine` and this PR might be made obsolete in the future.
**Summary:**
- Implemented loop-calling `GenericRateLimiter::Request()` with `bytes <= GetSingleBurstBytes()` as a static private helper function `BackupEngineImpl::LoopRateLimitRequestHelper`
-- Considering make this a util function in `RateLimiter` later or do something with `RateLimiter::RequestToken()`
- Replaced buggy internal callers with this helper function wherever requested byte is not pre-limited by `GetSingleBurstBytes()`
- Removed the minimum refill bytes per period enforced by `GenericRateLimiter` since it is useless and prevents testing `GenericRateLimiter` for extreme case with small refill bytes per period.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9063
Test Plan:
- Added a new test that failed the assertion before this change and now passes
- It exposed bugs in [the write during creation in `CopyOrCreateFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2034-L2043)), [the read of table properties in `GetFileDbIdentities()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2372-L2378)), [some read of metadata in `BackupMeta::LoadFromFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2726))
- Passing Existing tests
Reviewed By: ajkr
Differential Revision: D31824535
Pulled By: hx235
fbshipit-source-id: d2b3dea7a64e2a4b1e6a59fca322f0800a4fcbcc
Summary:
Context:
Surprisingly, there isn't any sanitization against negative `int64_t bytes` in `GenericRateLimiter::Request(int64_t bytes, const Env::IOPriority pri, Statistics* stats)`. A negative `bytes` can be passed in and incorrectly increases `available_bytes_` by subtracting the negative `bytes` from `available_bytes_`, such as [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L138) and [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L283), which are incorrect behaviors.
- Sanitized negative request bytes by rounding it up to 0
- Added notes to public and internal API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9112
Test Plan: - Rely on existing tests
Reviewed By: ajkr
Differential Revision: D32085364
Pulled By: hx235
fbshipit-source-id: b1b6066b2dd5ffc7bcbfb07069ca65a33578251b
Summary:
Context/Summary:
As users requested, a public API RateLimiter::GetTotalPendingRequests() is added to expose the total number of pending requests for bytes in the rate limiter, which is the size of the request queue of that priority (or of all priorities, if IO_TOTAL is interested) at the time when this API is called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8890
Test Plan:
- Passing added new unit tests
- Passing existing unit tests
Reviewed By: ajkr
Differential Revision: D30815500
Pulled By: hx235
fbshipit-source-id: 2dfa990f651c1c47378b6215c751ad76a5824300
Summary:
Context:
An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need.
The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER.
Similar benefits exist for IO_MID priority.
- Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331))
- Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor
- Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_
- Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595
Test Plan:
- passed existing rate_limiter_test.cc
- passed added unit tests in rate_limiter_test.cc
- run performance test to verify performance with only high/low requests is not affected by this change
- Set-up command:
`TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))`
- Test command:
`TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'`
- Before (on branch upstream/master):
`rocksdb.compact.write.bytes COUNT : 4014162`
`rocksdb.flush.write.bytes COUNT : 26715832`
rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66
- After (on branch rate_limiter_user_pri):
`rocksdb.compact.write.bytes COUNT : 3807822`
`rocksdb.flush.write.bytes COUNT : 26098659`
rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85
Reviewed By: ajkr
Differential Revision: D30577783
Pulled By: hx235
fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
Summary:
`GenericRateLimiter` slow path handles requests that cannot be satisfied
immediately. Such requests enter a queue, and their thread stays in `Request()`
until they are granted or the rate limiter is stopped. These threads are
responsible for unblocking themselves. The work to do so is split into two main
duties.
(1) Waiting for the next refill time.
(2) Refilling the bytes and granting requests.
Prior to this PR, the slow path logic involved a leader election algorithm to
pick one thread to perform (1) followed by (2). It elected the thread whose
request was at the front of the highest priority non-empty queue since that
request was most likely to be granted. This algorithm was efficient in terms of
reducing intermediate wakeups, which is a thread waking up only to resume
waiting after finding its request is not granted. However, the conceptual
complexity of this algorithm was too high. It took me a long time to draw a
timeline to understand how it works for just one edge case yet there were so
many.
This PR drops the leader election to reduce conceptual complexity. Now, the two
duties can be performed by whichever thread acquires the lock first. The risk
of this change is increasing the number of intermediate wakeups, however, we
took steps to mitigate that.
- `wait_until_refill_pending_` flag ensures only one thread performs (1). This\
prevents the thundering herd problem at the next refill time. The remaining\
threads wait on their condition variable with an unbounded duration -- thus we\
must remember to notify them to ensure forward progress.
- (1) is typically done by a thread at the front of a queue. This is trivial\
when the queues are initially empty as the first choice that arrives must be\
the only entry in its queue. When queues are initially non-empty, we achieve\
this by having (2) notify a thread at the front of a queue (preferring higher\
priority) to perform the next duty.
- We do not require any additional wakeup for (2). Typically it will just be\
done by the thread that finished (1).
Combined, the second and third bullet points above suggest the refill/granting
will typically be done by a request at the front of its queue. This is
important because one wakeup is saved when a granted request happens to be in an
already running thread.
Note there are a few cases that still lead to intermediate wakeup, however. The
first two are existing issues that also apply to the old algorithm, however, the
third (including both subpoints) is new.
- No request may be granted (only possible when rate limit dynamically\
decreases).
- Requests from a different queue may be granted.
- (2) may be run by a non-front request thread causing it to not be granted even\
if some requests in that same queue are granted. It can happen for a couple\
(unlikely) reasons.
- A new request may sneak in and grab the lock at the refill time, before the\
thread finishing (1) can wake up and grab it.
- A new request may sneak in and grab the lock and execute (1) before (2)'s\
chosen candidate can wake up and grab the lock. Then that non-front request\
thread performing (1) can carry over to perform (2).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602
Test Plan:
- Use existing tests. The edge cases listed in the comment are all performance\
related; I could not really think of any related to correctness. The logic\
looks the same whether a thread wakes up/finishes its work early/on-time/late,\
or whether the thread is chosen vs. "steals" the work.
- Verified write throughput and CPU overhead are basically the same with and\
without this change, even in a rate limiter heavy workload:
Test command:
```
$ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000
```
Results before this PR:
```
fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s
7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k
```
Results after this PR:
```
fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s
7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k
```
Reviewed By: hx235
Differential Revision: D30048013
Pulled By: ajkr
fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
Summary:
Context:
As need for new feature of resource management using RocksDB's rate limiter like [https://github.com/facebook/rocksdb/issues/8595](https://github.com/facebook/rocksdb/pull/8595) arises, it is about time to re-learn our rate limiter and make this learning process easier for others by improving its readability. The comment/assertion/one extra else-branch are added based on my best understanding toward the rate_limiter.cc and rate_limiter_test.cc up to date after giving it a hard read.
- Add code comments/assertion/one extra else-branch (that is not affecting existing behavior, see PR comment) to describe how leader-election works under multi-thread settings in GenericRateLimiter::Request()
- Add code comments to describe a non-obvious trick during clean-up of rate limiter destructor
- Add code comments to explain more about the starvation being fixed in GenericRateLimiter::Refill() through partial byte-granting
- Add code comments to the rate limiter's setup in a complicated unit test in rate_limiter_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8596
Test Plan: - passed existing rate_limiter_test.cc
Reviewed By: ajkr
Differential Revision: D29982590
Pulled By: hx235
fbshipit-source-id: c3592986bb5b0c90d8229fe44f425251ec7e8a0a
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Dynamic adjustment of rate limit according to demand for background I/O. It increases by a factor when limiter is drained too frequently, and decreases by the same factor when limiter is not drained frequently enough. The parameters for this behavior are fixed in `GenericRateLimiter::Tune`. Other changes:
- make rate limiter's `Env*` configurable for testing
- track num drain intervals in RateLimiter so we don't have to rely on stats, which may be shared across different DB instances from the ones that share the RateLimiter.
Closes https://github.com/facebook/rocksdb/pull/2899
Differential Revision: D5858704
Pulled By: ajkr
fbshipit-source-id: cc2bac30f85e7f6fd63655d0a6732ef9ed7403b1
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369
Differential Revision: D5127619
Pulled By: siying
fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
Summary:
It's hard for RocksDB to come up with a good default of delayed write rate. Use rate given by rate limiter if it is availalbe. This provides the I/O order of magnitude.
Closes https://github.com/facebook/rocksdb/pull/2357
Differential Revision: D5115324
Pulled By: siying
fbshipit-source-id: 341065ad2211c981fc804011c0f0e59a50c7e754
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
NowMicros() provides non-monotonic time. When wall clock is
synchronized or changed, the non-monotonicity time points will affect write rate
controllers. This patch changes write_controller.cc and rate_limiter.cc to use
monotonic time points.
Closes https://github.com/facebook/rocksdb/pull/1865
Differential Revision: D4561732
Pulled By: siying
fbshipit-source-id: 95ece62
Summary: When rate_bytes_per_sec * refill_period_us_ overflows, the actual limited rate is very low. Handle this case so the rate will be large.
Test Plan: Add a unit test for it.
Reviewers: IslamAbdelRahman, andrewkr
Reviewed By: andrewkr
Subscribers: yiwu, lightmark, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58929
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: This feature is going to be useful for mongodb+rocksdb. I'll expose it through mongo's API.
Test Plan: added new unit test. also will run TSAN on the new unit test
Reviewers: meyering, sdong
Reviewed By: meyering, sdong
Subscribers: meyering, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35307
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
User gets undefinied error since the definition is not exposed.
Also re-enable the db test with only upper bound check
Test Plan: db_test, rate_limit_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20403
Summary:
A generic rate limiter that can be shared by threads and rocksdb
instances. Will use this to smooth out write traffic generated by
compaction and flush. This will help us get better p99 behavior on flash
storage.
Test Plan:
unit test output
==== Test RateLimiterTest.Rate
request size [1 - 1023], limit 10 KB/sec, actual rate: 10.374969 KB/sec, elapsed 2002265
request size [1 - 2047], limit 20 KB/sec, actual rate: 20.771242 KB/sec, elapsed 2002139
request size [1 - 4095], limit 40 KB/sec, actual rate: 41.285299 KB/sec, elapsed 2202424
request size [1 - 8191], limit 80 KB/sec, actual rate: 81.371605 KB/sec, elapsed 2402558
request size [1 - 16383], limit 160 KB/sec, actual rate: 162.541268 KB/sec, elapsed 3303500
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19359
