Summary:
I previously misread or misinterpreted API contracts for SecondaryCache and this should correct the record. (Follow-up item from https://github.com/facebook/rocksdb/issues/11301)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11316
Test Plan: comments only
Reviewed By: anand1976
Differential Revision: D44245107
Pulled By: pdillinger
fbshipit-source-id: 3f8ddec150674b75728f1730f99b963bbf7b76e7
Summary:
... which increases default number of shards from 16 to 64. Although the default block cache size is only recommended for applications where RocksDB is not performance-critical, under stress conditions, block cache mutex contention could become a performance bottleneck. This change of default should alleviate that.
Note that reducing the size of cache shards (recommended minimum 512MB) could cause thrashing, e.g. on filter blocks, so capacity needs to increase to safely increase number of shards.
The 8MB default dates back to 2011 or earlier (f779e7a5), when the most simultaneous threads you could get from a single CPU socket was 20 (e.g. Intel Xeon E7-8870). Now more than 100 is available.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11350
Test Plan: unit tests updated
Reviewed By: cbi42
Differential Revision: D44674873
Pulled By: pdillinger
fbshipit-source-id: 91ed3070789b42679283c7e6dc97c41a6a97bdf4
Summary:
**Context/Summary:**
- Allow runtime changes to whether `WriteBufferManager` allows stall or not by calling `SetAllowStall()`
- Misc: some clean up - see PR conversation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11335
Test Plan: - New UT
Reviewed By: akankshamahajan15
Differential Revision: D44502555
Pulled By: hx235
fbshipit-source-id: 24b5cc57df7734b11d42e4870c06c87b95312b5e
Summary:
Similarly to `GetEntity` prior to https://github.com/facebook/rocksdb/issues/11303, the `MultiGetEntity` API is currently
only used in the DB verification logic of the stress tests. The patch introduces
a new mode where all point lookups are performed using `MultiGetEntity`,
and implements the corresponding logic in the non-batched, batched, and
CF consistency tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11336
Test Plan: Ran simple blackbox tests for the various stress test flavors.
Reviewed By: akankshamahajan15
Differential Revision: D44513285
Pulled By: ltamasi
fbshipit-source-id: c3db098501bf875b6a356b09fc676a0268d92c35
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
…evel_bytes
During DB open, if a column family uses level compaction with level_compaction_dynamic_level_bytes=true, trivially move its files down in the LSM such that the bottommost files are in Lmax, the second from bottommost level files are in Lmax-1 and so on. This is aimed to make it easier to migrate level_compaction_dynamic_level_bytes from false to true. Before this change, a full manual compaction is suggested for such migration. After this change, user can just restart DB to turn on this option. db_crashtest.py is updated to randomly choose value for level_compaction_dynamic_level_bytes.
Note that there may still be too many unnecessary levels if a user is migrating from universal compaction or level compaction with a smaller level multiplier. A full manual compaction may still be needed in that case before some PR that automatically drain unnecessary levels like https://github.com/facebook/rocksdb/issues/3921 lands. Eventually we may want to change the default value of option level_compaction_dynamic_level_bytes to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11321
Test Plan:
1. Added unit tests.
2. Crash test: ran a variation of db_crashtest.py (like 32516507e77521ae887e45091b69139e32e8efb7) that turns level_compaction_dynamic_level_bytes on and off and switches between LC and UC for the same DB.
TODO: Update `OptionChangeMigration`, either after this PR or https://github.com/facebook/rocksdb/issues/3921.
Reviewed By: ajkr
Differential Revision: D44341930
Pulled By: cbi42
fbshipit-source-id: 013de19a915c6a0502be569f07c4cc8f1c3c6be2
Summary:
This include is unused in the header. In one build environment of ours, stdarg.h is actually not present, and this include prevents us from building rocksdb dependencies.
We're currently monkey-patching this line out in our build script (still WIP), which of course is not good. ec2852caa3
Note that removing this include might break builds in unexpected ways that include rocksdb/c.h and then use `va_start`, `va_end`, etc. However, if you're using these functions, you really should include stdarg.h yourself, so I don't think this should prevent this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11302
Reviewed By: ajkr
Differential Revision: D44139819
Pulled By: cbi42
fbshipit-source-id: 10c40b0b0260b23ccb7dc84e55a993c7dfbdc4cf
Summary:
In DBCompactionTest::CancelCompactionWaitingOnConflict, when generating SST files to trigger a compaction, we don't wait after each file, which may cause multiple memtables going to the same SST file, causing insufficient files to trigger the compaction. We do the waiting instead, except the last one, which would trigger compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11318
Test Plan: Run DBCompactionTest.CancelCompactionWaitingOnConflict multiple times.
Reviewed By: ajkr
Differential Revision: D44267273
fbshipit-source-id: 86af49b05fc67ea3335312f0f5f3d22df1520bf8
Summary:
Right now, EnvLogger has the same IO error assertion as most other places: if we are writing to the file after we've seen an IO error, the assertion would trigger. This is too strict for info logger: we would not fail DB if info logger fails and we would try the best to continue logging. For now, we simplify the problem by disabling the assertion for EnvLogger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11314
Test Plan: Run env_logger_test to make sure at least it doesn't fail in normal cases.
Reviewed By: anand1976
Differential Revision: D44227732
fbshipit-source-id: e3d31a221a5757f018a67ccaa96dcf89eb981f66
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
Summary:
In PosixFileSystem, IO uring support is opt-in. If the support is not enabled by the user, then ignore the async_io ReadOption in MultiGet and iteration at the top, rather than follow the async_io codepath and transparently switch to sync IO at the FileSystem layer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11296
Test Plan: Add new unit tests
Reviewed By: akankshamahajan15
Differential Revision: D44045776
Pulled By: anand1976
fbshipit-source-id: a0881bf763ca2fde50b84063d0068bb521edd8b9
Summary:
The `GetEntity` API is currently used in the stress tests for verification purposes;
this patch extends the coverage by adding a mode where all point lookups in
the non-batched, batched, and CF consistency stress tests are done using this API.
The PR also includes a bit of refactoring to eliminate some boilerplate code around
the wide-column consistency checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11303
Test Plan: Ran stress tests of the batched, non-batched, and CF consistency varieties.
Reviewed By: akankshamahajan15
Differential Revision: D44148503
Pulled By: ltamasi
fbshipit-source-id: fecdbfd3e65a459bbf16ab7aa7b9173e19240077
Summary:
In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic.
This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code.
gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper.
Also refactored some related test code to share common code / functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D44101453
Pulled By: pdillinger
fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345
Summary:
... ahead of a larger change.
* Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache`
* Unify naming of "standalone" block cache entries (was "detached" in clock_cache)
* Remove some unused definitions in clock_cache.h (leftover from a previous revision)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291
Test Plan: usual tests and CI, no behavior changes
Reviewed By: anand1976
Differential Revision: D43984642
Pulled By: pdillinger
fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97
Summary:
**Context:**
Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes .
```
./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 10
kill $pid
sleep 0.2
./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 40
kill $pid
sleep 0.2
Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound:
Crash-recovery verification failed :(
No writes or ops?
Verification failed :(
```
The bug is due to the following:
- When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`.
- But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N.
- However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M.
**Summary:**
- Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`.
- For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148
Test Plan:
- New unit test failed before the fix and passes after
- Make check
- Rehearsal stress test
Reviewed By: ajkr
Differential Revision: D42799871
Pulled By: hx235
fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
Summary:
... to simplify code and make it less prone to needless updates on refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11295
Test Plan: existing tests (no functional changes intended)
Reviewed By: hx235
Differential Revision: D44040260
Pulled By: pdillinger
fbshipit-source-id: 1b6badb5c8ca673db0903bfaba3cfbc986f386be
Summary:
In rare cases seeing failures like this
```
[ RUN ] DBWriteTestInstance/DBWriteTest.LockWALInEffect/2
db/db_write_test.cc:653: Failure
Put("key3", "value")
Corruption: Not active
```
in a test with no explicit threading. This is likely because of the unpredictability of background auto-resume. I didn't really know this feature, in part because DB::Resume() was undocumented. So I believe I have fixed the test and documented the API function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11290
Test Plan: 1000s of stress runs of the test with gtest-parallel
Reviewed By: anand1976
Differential Revision: D43984583
Pulled By: pdillinger
fbshipit-source-id: d30dec120b4864e193751b2e33ff16834d313db3
Summary:
CreateColumnFamilyWithImport() did not support range tombstones for two reasons:
1. it uses point keys of a input file to determine its boundary (smallest and largest internal key), which means range tombstones outside of the point key range will be effectively dropped.
2. it does not handle files with no point keys.
Also included a fix in external_sst_file_ingestion_job.cc where the blocks read in `GetIngestedFileInfo()` can be added to block cache now (issue fixed in https://github.com/facebook/rocksdb/pull/6429).
This PR adds support for exporting and importing column family with range tombstones. The main change is to add smallest internal key and largest internal key to `SstFileMetaData` that will be part of the output of `ExportColumnFamily()`. Then during `CreateColumnFamilyWithImport(...,const ExportImportFilesMetaData& metadata,...)`, file boundaries can be set from `metadata` directly. This is needed since when file boundaries are extended by range tombstones, sometimes they cannot be deduced from a file's content alone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11252
Test Plan:
- added unit tests that fails before this change
Closes https://github.com/facebook/rocksdb/issues/11245
Reviewed By: ajkr
Differential Revision: D43577443
Pulled By: cbi42
fbshipit-source-id: 6bff78e583cc50c44854994dea0a8dd519398f2f
Summary:
Fix for https://github.com/facebook/rocksdb/issues/11008
`Java_org_rocksdb_WriteBatchWithIndex_iteratorWithBase` takes parameters `(… jlong jwbwi_handle, jlong jcf_handle,
jlong jbase_iterator_handle, jlong jread_opts_handle)` while `WriteBatchWithIndex.java` declares `private native long iteratorWithBase(final long handle, final long baseIteratorHandle,
final long cfHandle, final long readOptionsHandle)`.
Luckily the only call to `iteratorWithBase` passes the parameters in the correct order for the implementation `(… cfHandle, baseIteratorHandle …)` This type checks because the types are the same (long words).
The code is currently used correctly, it is just extremely misleading. Swap the names of the 2 parameters in the Java method so that the correct usage is clear.
There already exist test methods which call the API correctly and only succeed because of that. These continue to work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11280
Reviewed By: cbi42
Differential Revision: D43874798
Pulled By: ajkr
fbshipit-source-id: b59bc930bf579f4e0804f0effd4fb17f4225d60c
Summary:
Per the discussion in https://groups.google.com/g/rocksdb/c/JqhlvSs6ZEs/m/bnXZ7Q--AAAJ
It seems non-obvious that googlebenchmark must be installed manually before microbenchmarks can be run. I have added more detail to the installation instructions to make it clearer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11282
Reviewed By: cbi42
Differential Revision: D43874724
Pulled By: ajkr
fbshipit-source-id: f64a4ac4914cb057955d1ca965885f8822ca7764
Summary:
Fix hang in async_io benchmarks in regression script. I changed the order of benchmarks and that somehow fixed the issue of hang.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11285
Test Plan: Ran it manually
Reviewed By: pdillinger
Differential Revision: D43937431
Pulled By: akankshamahajan15
fbshipit-source-id: 7c43075d3be6b8f41d08e845664012768b769661
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
Internally, the benchmark is going on hang state whereas when run on same host manually, it passes. Decrease the duration to 5s to figure out how much time it is taking to complete the benchmark.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11283
Test Plan: Ran manually internally
Reviewed By: hx235
Differential Revision: D43882260
Pulled By: akankshamahajan15
fbshipit-source-id: 9ea44164773d4df4fc05cd817b7e011426c4d428
Summary:
Adds unit tests verifying that a block payload and checksum of all zeros is not falsely considered valid data. The test exhaustively checks that for blocks up to some length (default 20K, more exhaustively 10M) of all zeros do not produce a block checksum of all zeros.
Also small refactoring of an existing checksum test to use parameterized test. (Suggest hiding whitespace changes for review.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11260
Test Plan:
this is the test, manual run with
`ROCKSDB_THOROUGH_CHECKSUM_TEST=1` to verify up to 10M.
Reviewed By: hx235
Differential Revision: D43706192
Pulled By: pdillinger
fbshipit-source-id: 95e721c320ca928e7fa2400c2570fb359cc30b1f
Summary:
Provide support in benchmark regression to use different options to be used in async_io benchamark only - "$`MAX_READAHEAD_SIZE`", $`INITIAL_READAHEAD_SIZE`", "$`NUM_READS_FOR_READAHEAD_SIZE`".
If user wants to run set these parameters for all benchmarks then these parameters need to be set in OPTION file instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11262
Test Plan: Ran manually
Reviewed By: anand1976
Differential Revision: D43725567
Pulled By: akankshamahajan15
fbshipit-source-id: 28c3462dd785ffd646d44560fa9c92bc6a8066e5
Summary:
`BlobSourceCacheReservationTest.IncreaseCacheReservationOnFullCache` is both flaky and also doesn't do what its name says. The patch changes this test so it actually tests increasing the cache reservation, hopefully also deflaking it in the process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11273
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43800935
Pulled By: ltamasi
fbshipit-source-id: 5eb54130dfbe227285b0e14f2084aa4b89f0b107
Summary:
On Linux systems using full ASLR, including CircleCI, the old backtrace()+addr2line stack traces are pretty useless, as seen in some failures under ASSERT_STATUS_CHECKED=1 LIB_MODE=static. Use gdb by default for stack traces under Linux. More detail in code comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11272
Test Plan: manual testing locally and on CircleCI with ssh
Reviewed By: anand1976
Differential Revision: D43786211
Pulled By: pdillinger
fbshipit-source-id: f8c7c77f774b504fbdf7c786ff2430cbc8f5b939
Summary:
Hi. :) Noticed we are copying ColumnFamilyDescriptor here because my process crashed during copy constructor (cause unrelated)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10978
Reviewed By: cbi42
Differential Revision: D41473924
Pulled By: ajkr
fbshipit-source-id: 58a3473f2d7b24918f79d4b2726c20081c5e95b4
Summary:
The patch makes the following changes to the API comments:
* Some general comments about snapshots, thread safety, and user-defined timestamps are moved to a more prominent place at the top of the file.
* Detailed descriptions are added for each `ValueType` and `Decision`, fixing and extending some existing comments (e.g. that of `kRemove`, which suggested that key-values are simply removed from the output, while in reality base values are converted to tombstones) and adding detailed comments that were missing (e.g. `kPurge` and `kChangeWideColumnEntity`).
* Updated/extended the comments of `FilterV2/V3` and `FilterBlobByKey`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11261
Reviewed By: akankshamahajan15
Differential Revision: D43714314
Pulled By: ltamasi
fbshipit-source-id: 835f4b1bdac1ce0e291155186095211303260729
Summary:
During backward iteration, blob verification would fail because the user key (ts included) in `saved_key_` doesn't match the blob. This happens because during`FindValueForCurrentKey`, `saved_key_` is not updated when the user key(ts not included) is the same for all cases except when `timestamp_lb_` is specified. This breaks the blob verification logic when user defined timestamp is enabled and `timestamp_lb_` is not specified. Fix this by always updating `saved_key_` when a smaller user key (ts included) is seen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11258
Test Plan:
`make check`
`./db_blob_basic_test --gtest_filter=DBBlobWithTimestampTest.IterateBlobs`
Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced with:
`./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5`
Baseline:
- seekrandom [AVG 6 runs] : 72188 (± 1481) ops/sec; 37.2 (± 0.8) MB/sec
With this PR:
- seekrandom [AVG 6 runs] : 74171 (± 1427) ops/sec; 38.2 (± 0.7) MB/sec
Reviewed By: ltamasi
Differential Revision: D43675642
Pulled By: jowlyzhang
fbshipit-source-id: 8022ae8522d1f66548821855e6eed63640c14e04
Summary:
Add more stats for better visibility into the usefulness of the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11246
Test Plan: Add a new unit test
Reviewed By: akankshamahajan15
Differential Revision: D43521364
Pulled By: anand1976
fbshipit-source-id: a92f04884e738a9bf40ad4047acaaaea343838a7
Hui Xiao