Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
#4905 removed the implementation of `NewEmptyIterator` but kept its
declaration in the public header. This breaks some systems that depend on
RocksDB if the systems use `NewEmptyIterator`. Therefore, add it back to fix. cc maysamyabandeh please remind me if I miss anything here. Thanks
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5203
Differential Revision: D14968382
Pulled By: riversand963
fbshipit-source-id: 5fb86e99c8cfaf9f7a9473cdb1355d7558ff6e01
Summary:
NewEmptyInternalIterator with arena mistakenly used EmptyIterator to allocate the size from area but then initialized it to a totally different object: EmptyInternalIterator. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4905
Differential Revision: D14689840
Pulled By: maysamyabandeh
fbshipit-source-id: af64fd8ee93d5a4ad54691c792e5ecc5efabc887
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Cleanable objects will perform the registered cleanups when
they are destructed. We however rather to delay this cleaning like when
we are gathering the merge operands. Current approach is to create the
Cleanable object on heap (instead of on stack) and delay deleting it.
By allowing Cleanables to delegate their cleanups to another cleanable
object we can delay the cleaning without however the need to craete the
cleanable object on heap and keeping it around. This patch applies this
technique for the cleanups of BlockIter and shows improved performance
for some in-memory benchmarks:
+1.8% for merge worklaod, +6.4% for non-merge workload when the merge
operator is specified.
https://our.intern.facebook.com/intern/tasks?t=15168163
Non-merge benchmark:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench --benchmarks=fillrandom
--num=1000000 -value_size=100 -compression_type=none
Reading random with no merge operator specified:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench
--benchmarks="read
Closes https://github.com/facebook/rocksdb/pull/1711
Differential Revision: D4361163
Pulled By: maysamyabandeh
fbshipit-source-id: 9801e07
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
