Commit Graph

36 Commits

Author SHA1 Message Date
Siying Dong 545d206040 Move some file related files outside util/ (#5375)
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375

Differential Revision: D15550935

Pulled By: siying

fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
2019-05-29 20:47:06 -07:00
Michael Liu ca89ac2ba9 Apply modernize-use-override (2nd iteration)
Summary:
Use C++11’s override and remove virtual where applicable.
Change are automatically generated.

Reviewed By: Orvid

Differential Revision: D14090024

fbshipit-source-id: 1e9432e87d2657e1ff0028e15370a85d1739ba2a
2019-02-14 14:41:36 -08:00
Anand Ananthabhotla a27fce408e Auto recovery from out of space errors (#4164)
Summary:
This commit implements automatic recovery from a Status::NoSpace() error
during background operations such as write callback, flush and
compaction. The broad design is as follows -
1. Compaction errors are treated as soft errors and don't put the
database in read-only mode. A compaction is delayed until enough free
disk space is available to accomodate the compaction outputs, which is
estimated based on the input size. This means that users can continue to
write, and we rely on the WriteController to delay or stop writes if the
compaction debt becomes too high due to persistent low disk space
condition
2. Errors during write callback and flush are treated as hard errors,
i.e the database is put in read-only mode and goes back to read-write
only fater certain recovery actions are taken.
3. Both types of recovery rely on the SstFileManagerImpl to poll for
sufficient disk space. We assume that there is a 1-1 mapping between an
SFM and the underlying OS storage container. For cases where multiple
DBs are hosted on a single storage container, the user is expected to
allocate a single SFM instance and use the same one for all the DBs. If
no SFM is specified by the user, DBImpl::Open() will allocate one, but
this will be one per DB and each DB will recover independently. The
recovery implemented by SFM is as follows -
  a) On the first occurance of an out of space error during compaction,
subsequent
  compactions will be delayed until the disk free space check indicates
  enough available space. The required space is computed as the sum of
  input sizes.
  b) The free space check requirement will be removed once the amount of
  free space is greater than the size reserved by in progress
  compactions when the first error occured
  c) If the out of space error is a hard error, a background thread in
  SFM will poll for sufficient headroom before triggering the recovery
  of the database and putting it in write-only mode. The headroom is
  calculated as the sum of the write_buffer_size of all the DB instances
  associated with the SFM
4. EventListener callbacks will be called at the start and completion of
automatic recovery. Users can disable the auto recov ery in the start
callback, and later initiate it manually by calling DB::Resume()

Todo:
1. More extensive testing
2. Add disk full condition to db_stress (follow-on PR)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4164

Differential Revision: D9846378

Pulled By: anand1976

fbshipit-source-id: 80ea875dbd7f00205e19c82215ff6e37da10da4a
2018-09-15 13:43:04 -07:00
Maysam Yabandeh 8581a93a6b Per-thread unique test db names (#4135)
Summary:
The patch makes sure that two parallel test threads will operate on different db paths. This enables using open source tools such as gtest-parallel to run the tests of a file in parallel.
Example: ``` ~/gtest-parallel/gtest-parallel ./table_test```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4135

Differential Revision: D8846653

Pulled By: maysamyabandeh

fbshipit-source-id: 799bad1abb260e3d346bcb680d2ae207a852ba84
2018-07-13 17:27:39 -07:00
Siying Dong 926f3a78a6 In delete scheduler, before ftruncate file for slow delete, check whether there is other hard links (#4093)
Summary:
Right now slow deletion with ftruncate doesn't work well with checkpoints because it ruin hard linked files in checkpoints. To fix it, check the file has no other hard link before ftruncate it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4093

Differential Revision: D8730360

Pulled By: siying

fbshipit-source-id: 756eea5bce8a87b9a2ea3a5bfa190b2cab6f75df
2018-07-09 15:28:12 -07:00
Siying Dong 63c965cdb4 Sync parent directory after deleting a file in delete scheduler
Summary:
sync parent directory after deleting a file in delete scheduler. Otherwise, trim speed may not be as smooth as what we want.
Closes https://github.com/facebook/rocksdb/pull/3767

Differential Revision: D7760136

Pulled By: siying

fbshipit-source-id: ec131d53b61953f09c60d67e901e5eeb2716b05f
2018-04-26 13:58:20 -07:00
Zhongyi Xie 954b496b3f fix memory leak in two_level_iterator
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718

Reviewed By: maysamyabandeh

Differential Revision: D7621192

Pulled By: miasantreble

fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
2018-04-15 17:26:26 -07:00
David Lai 3be9b36453 comment unused parameters to turn on -Wunused-parameter flag
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662

Differential Revision: D7426121

Pulled By: Dayvedde

fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
2018-04-12 17:59:16 -07:00
Siying Dong 118058ba69 SstFileManager: add bytes_max_delete_chunk
Summary:
Add `bytes_max_delete_chunk` in SstFileManager so that we can drop a large file in multiple batches.
Closes https://github.com/facebook/rocksdb/pull/3640

Differential Revision: D7358679

Pulled By: siying

fbshipit-source-id: ef17f0da2f5723dbece2669485a9b91b3edc0bb7
2018-03-22 15:58:37 -07:00
Andrew Kryczka 6a3eebbab0 support multiple db_paths in SstFileManager
Summary:
Now that files scheduled for deletion are kept in the same directory, we don't need to constrain deletion scheduler to `db_paths[0]`. Previously this was done because there was a separate trash directory, and this constraint prevented files from being accidentally copied to another filesystem when they're scheduled for deletion.
Closes https://github.com/facebook/rocksdb/pull/3544

Differential Revision: D7093786

Pulled By: ajkr

fbshipit-source-id: 202f5c92d925eafebec1281fb95bb5828d33414f
2018-03-06 12:43:51 -08:00
Gustav Davidsson 2d04ed65e4 Make trash-to-DB size ratio limit configurable
Summary:
Allow users to configure the trash-to-DB size ratio limit, so
that ratelimits for deletes can be enforced even when larger portions of
the database are being deleted.
Closes https://github.com/facebook/rocksdb/pull/3158

Differential Revision: D6304897

Pulled By: gdavidsson

fbshipit-source-id: a28dd13059ebab7d4171b953ed91ce383a84d6b3
2017-11-17 11:58:17 -08:00
Islam AbdelRahman 05993155ef Mark files as trash by using .trash extension
Summary:
SstFileManager move files that need to be deleted into a trash directory.
Deprecate this behaviour and instead add ".trash" extension to files that need to be deleted
Closes https://github.com/facebook/rocksdb/pull/2970

Differential Revision: D5976805

Pulled By: IslamAbdelRahman

fbshipit-source-id: 27374ece4315610b2792c30ffcd50232d4c9a343
2017-10-27 13:27:12 -07:00
Sagar Vemuri 72502cf227 Revert "comment out unused parameters"
Summary:
This reverts the previous commit 1d7048c598, which broke the build.

Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627

Differential Revision: D5476473

Pulled By: sagar0

fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
2017-07-21 18:26:26 -07:00
Victor Gao 1d7048c598 comment out unused parameters
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.

Reviewed By: igorsugak

Differential Revision: D5454343

fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
2017-07-21 14:57:44 -07:00
Islam AbdelRahman 3e5ea29a83 Fix Flaky DeleteSchedulerTest::ImmediateDeleteOn25PercDBSize
Summary:
In this test we are deleting 100 files, and we are expecting DeleteScheduler to delete 26 files in the background and 74 files immediately in the foreground

The main purpose of the test is to make sure that we delete files in foreground thread, which is verified in line 546

But sometimes we may end up with 26 files or 25 files in the trash directory because the background thread may be slow and not be able to delete the first file fast enough, so sometimes this test fail.

Remove
```
ASSERT_EQ(CountFilesInDir(trash_dir_), 25);
```
Since it does not have any benefit any way
Closes https://github.com/facebook/rocksdb/pull/2618

Differential Revision: D5458674

Pulled By: IslamAbdelRahman

fbshipit-source-id: 5556a9edfa049db71dce80b8e6ae0fdd25e1e74e
2017-07-20 11:29:01 -07:00
Siying Dong 3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Islam AbdelRahman d713471da8 Limit trash directory to be 25% of total DB
Summary:
Update DeleteScheduler to delete files immediately if trash directory is >= 25% of DB size
Closes https://github.com/facebook/rocksdb/pull/2436

Differential Revision: D5230384

Pulled By: IslamAbdelRahman

fbshipit-source-id: 5cbda8ac536a3cc72c774641621edc02c8202482
2017-06-12 16:57:21 -07:00
Siying Dong d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Tomas Kolda 04d58970cb AIX and Solaris Sparc Support
Summary:
Replacement of #2147

The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194

Differential Revision: D4929799

Pulled By: siying

fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
2017-04-21 20:48:04 -07:00
Andrew Kryczka 80fe5b3855 disable test: DeleteSchedulerTest.DynamicRateLimiting1
Summary:
temporarily disable since it isn't working on travis.
Closes https://github.com/facebook/rocksdb/pull/2064

Differential Revision: D4807373

Pulled By: ajkr

fbshipit-source-id: f2bb2b0
2017-03-30 16:54:52 -07:00
Islam AbdelRahman 995618a821 Support SstFileManager::SetDeleteRateBytesPerSecond()
Summary:
Update DeleteScheduler component to support changing delete rate in runtime by introducing
SstFileManager::SetDeleteRateBytesPerSecond()
Closes https://github.com/facebook/rocksdb/pull/1994

Differential Revision: D4719906

Pulled By: IslamAbdelRahman

fbshipit-source-id: e6b8d9e
2017-03-16 12:09:15 -07:00
Dmitri Smirnov 0a4cdde50a Windows thread
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
  an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread.  On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823

Differential Revision: D4492902

Pulled By: siying

fbshipit-source-id: c74cb11
2017-02-06 14:54:18 -08:00
Islam AbdelRahman 989e644ed8 Remove sst_file_manager option from LITE
Summary:
Remove sst_file_manager option from LITE
Closes https://github.com/facebook/rocksdb/pull/1690

Differential Revision: D4341331

Pulled By: IslamAbdelRahman

fbshipit-source-id: 9f9328d
2016-12-21 17:54:21 -08:00
Islam AbdelRahman b88f8e87c5 Support SST files with Global sequence numbers [reland]
Summary:
reland https://reviews.facebook.net/D62523

- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file

Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks

Test Plan: unit tests

Reviewers: sdong, yhchiang

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65211
2016-10-18 16:59:37 -07:00
Islam AbdelRahman d062328977 Revert "Support SST files with Global sequence numbers"
This reverts commit ab01da5437.
2016-10-07 14:05:12 -07:00
Islam AbdelRahman ab01da5437 Support SST files with Global sequence numbers
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file

Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks

Test Plan: unit tests

Reviewers: andrewkr, yhchiang, yiwu, sdong

Reviewed By: sdong

Subscribers: hcz, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D62523
2016-10-03 16:12:39 -07:00
omegaga 2d05eaeb28 Fix name conflict in delete_shceduler_test and db_sst_test
Summary: delete_scheduler_test and db_sst_test share a same directory name, causing possible fails on both tests when running in parallel. Fixed by changing directory name.

Test Plan: Run the two tests in parallel: `parallel -u ./{} ::: delete_scheduler_test db_sst_test`

Reviewers: sdong, andrewkr

Reviewed By: sdong, andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59529
2016-06-10 15:39:17 -07:00
Baraa Hamodi 21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Islam AbdelRahman d6c838f1e1 Add SstFileManager (component tracking all SST file in DBs and control the deletion rate)
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size

Test Plan: unit tests

Reviewers: rven, anthony, yhchiang, sdong

Reviewed By: sdong

Subscribers: igor, lovro, march, dhruba

Differential Revision: https://reviews.facebook.net/D50469
2016-01-28 18:35:01 -08:00
Islam AbdelRahman 16d1ba7001 Clear SyncPoint Trace in DeleteSchedulerTests
Summary: DeleteSchedulerTests is running the same test with different rates, After the first iteraton sync points become useless because ClearTrace was not being called

Test Plan: Run the test

Reviewers: sdong, yhchiang, igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D47709
2015-09-28 15:58:50 -07:00
Islam AbdelRahman 3fd70b05b8 Rate limit deletes issued by DestroyDB
Summary: Update DestroyDB so that all SST files in the first path id go through DeleteScheduler instead of being deleted immediately

Test Plan: added a unittest

Reviewers: igor, yhchiang, anthony, kradhakrishnan, rven, sdong

Reviewed By: sdong

Subscribers: jeanxu2012, dhruba

Differential Revision: https://reviews.facebook.net/D44955
2015-08-19 15:02:17 -07:00
Islam AbdelRahman 22dcaaff30 More accurate time measurement for delete_scheduler_test
Summary: Start measuring time spent before BackgroundEmptyTrash starts

Test Plan: delete_scheduler_test

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43857
2015-08-07 15:37:56 -07:00
Islam AbdelRahman 40f893f4a9 Fix delete_scheduler_test valgrind error
Summary: Use shared_ptr instead of deleting in destructor

Test Plan: DISABLE_JEMALLOC=1 make delete_scheduler_test -j64 && valgrind --error-exitcode=2 --leak-check=full ./delete_scheduler_test

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43659
2015-08-06 10:56:00 -07:00
Islam AbdelRahman 29b028b0ed Make DeleteScheduler tests more reliable
Summary: Update DeleteScheduler tests so that they verify the used penalties for waiting instead of measuring the time spent which is not reliable

Test Plan:
make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_TSAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_ASAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test

make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_TSAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_ASAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43635
2015-08-05 19:16:52 -07:00
Islam AbdelRahman bd2fc5f5fb Fix TSAN for delete_scheduler_test
Summary: Fixing TSAN false positive and relaxing the conditions when we are running under TSAN

Test Plan: COMPILE_WITH_TSAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43593
2015-08-05 11:45:31 -07:00
Islam AbdelRahman c45a57b41e Support delete rate limiting
Summary:
Introduce DeleteScheduler that allow enforcing a rate limit on file deletion
Instead of deleting files immediately, files are moved to trash directory and deleted in a background thread that apply sleep penalty between deletes if needed.

I have updated PurgeObsoleteFiles and PurgeObsoleteWALFiles to use the delete_scheduler instead of env_->DeleteFile

Test Plan:
added delete_scheduler_test
existing unit tests

Reviewers: kradhakrishnan, anthony, rven, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43221
2015-08-04 20:45:27 -07:00