Summary:
Fixing the not-checked status failure as in https://github.com/facebook/rocksdb/actions/runs/8334988399/job/22809612148.
When the status is not ok() for any reason, we do not check the `wal_read_status` because it's not necessary. It's causing the test failure when running with `ASSERT_STATUS_CHECKED=1`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12460
Test Plan: Existing tests
Reviewed By: ajkr
Differential Revision: D55104844
Pulled By: jaykorean
fbshipit-source-id: 919b1fddca835494f9087c51c4da6eabc9e8df2b
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D55087322
fbshipit-source-id: ca4db7285444306d6c91545cd2c33483dfe05385
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D54362227
fbshipit-source-id: ac634ba34f9351ba559c4ed96448f51d6ef33175
Summary:
On file systems that support storage level data checksum and reconstruction, retry SST block reads for point lookups, scans, and flush and compaction if there's a checksum mismatch on the initial read. A file system can indicate its support by setting the `FSSupportedOps::kVerifyAndReconstructRead` bit in `SupportedOps`.
Tests:
Add new unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12427
Reviewed By: ajkr
Differential Revision: D55025941
Pulled By: anand1976
fbshipit-source-id: dbd990cb75e03f756c8a66d42956f645c0b6d55e
Summary:
Update `compaction_service_test` to make sure remote compaction works with multiple column family set up. Minor refactor to get rid of duplicate code
Fixing one quick bug in the existing test util: Test util's `FilesPerLevel` didn't honor `cf_id` properly)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12430
Test Plan:
```
./compaction_service_test
```
Reviewed By: ajkr
Differential Revision: D54883035
Pulled By: jaykorean
fbshipit-source-id: 83b4f6f566fed5c4824bfef7de01074354a72b44
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12442
The patch deduplicates and unifies the logic of `WriteBatchWithIndex::{Get,GetEntity}FromBatch` using templates and makes some small code hygiene improvements, including consistently clearing the output value in the various non-success cases.
Reviewed By: jaykorean
Differential Revision: D54922935
fbshipit-source-id: c92e89f905a3c80cef57c2c840f49f806629238f
Summary:
This PR continues https://github.com/facebook/rocksdb/issues/12153 by implementing the missing `Iterator` APIs - `Seek()`, `SeekForPrev()`, `SeekToLast()`, and `Prev`. A MaxHeap Implementation has been added to handle the reverse direction.
The current implementation does not include upper/lower bounds yet. These will be added in subsequent PRs. The API is still marked as under construction and will be lifted after being added to the stress test.
Please note that changing the iterator direction in the middle of iteration is expensive, as it requires seeking the element in each iterator again in the opposite direction and rebuilding the heap along the way. The first `Next()` after `SeekForPrev()` requires changing the direction under the current implementation. We may optimize this in later PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12422
Test Plan: The `multi_cf_iterator_test` has been extended to cover the API implementations.
Reviewed By: pdillinger
Differential Revision: D54820754
Pulled By: jaykorean
fbshipit-source-id: 9eb741508df0f7bad598fb8e6bd5cdffc39e81d1
Summary:
with https://github.com/facebook/rocksdb/issues/12414 enabling `ReadOptions::pin_data`, this bug surfaced as corrupted per key-value checksum during crash test. `saved_key_.GetUserKey()` could be pinned user key, so DBIter should not overwrite it.
In one case, it only surfaces when iterator skips many keys of the same user key. To stress that code path, this PR also added `max_sequential_skip_in_iterations` to crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12451
Test Plan:
- Set ReadOptions::pin_data to true, the bug can be reproed quickly with `./db_stress --persist_user_defined_timestamps=1 --user_timestamp_size=8 --writepercent=35 --delpercent=4 --delrangepercent=1 --iterpercent=20 --nooverwritepercent=1 --prefix_size=8 --prefixpercent=10 --readpercent=30 --memtable_protection_bytes_per_key=8 --block_protection_bytes_per_key=2 --clear_column_family_one_in=0`.
- Set max_sequential_skip_in_iterations to 1 for the other occurrence of the bug.
Reviewed By: jowlyzhang
Differential Revision: D55003766
Pulled By: cbi42
fbshipit-source-id: 23e1049129456684dafb028b6132b70e0afc07fb
Summary:
This PR adds support to return data's approximate unix write time in the iterator property API. The general implementation is:
1) If the entry comes from a SST file, the sequence number to time mapping recorded in that file's table properties will be used to deduce the entry's write time from its sequence number. If no such recording is available, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown except if the entry's sequence number is zero, in which case, 0 is returned. This also means that even if `preclude_last_level_data_seconds` and `preserve_internal_time_seconds` can be toggled off between DB reopens, as long as the SST file's table property has the mapping available, the entry's write time can be deduced and returned.
2) If the entry comes from memtable, we will use the DB's sequence number to write time mapping to do similar things. A copy of the DB's seqno to write time mapping is kept in SuperVersion to allow iterators to have lock free access. This also means a new `SuperVersion` is installed each time DB's seqno to time mapping updates, which is originally proposed by Peter in https://github.com/facebook/rocksdb/issues/11928 . Similarly, if the feature is not enabled, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown.
Needed follow up:
1) The write time for `kTypeValuePreferredSeqno` should be special cased, where it's already specified by the user, so we can directly return it.
2) Flush job can be updated to use DB's seqno to time mapping copy in the SuperVersion.
3) Handle the case when `TimedPut` is called with a write time that is `std::numeric_limits<uint64_t>::max()`. We can make it a regular `Put`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12428
Test Plan: Added unit test
Reviewed By: pdillinger
Differential Revision: D54967067
Pulled By: jowlyzhang
fbshipit-source-id: c795b1b7ec142e09e53f2ed3461cf719833cb37a
Summary:
Thanks ltamasi for pointing out this bug.
We were incorrectly overwriting `Status::Incomplete` with `Status::OK` after a table cache miss failed to open the file due to the read being memory-only (`kBlockCacheTier`). The fix is to simply stop overwriting the status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12443
Reviewed By: cbi42
Differential Revision: D54930128
Pulled By: ajkr
fbshipit-source-id: 52f912a2e93b46e71d79fc5968f8ca35b299213d
Summary:
The use case is similar to `MergeOperator::ShouldMerge()` for `Get()`: preventing reads into LSM components for merge operands that are of no interest to the user. `MergeOperator::ShouldMerge()` cannot be reused here because:
- Its name does not make sense in the context of `GetMergeOperands()` since `GetMergeOperands()` never invokes merge
- The callback is part of the `MergeOperator`, but an option specific to the read operation makes more sense to me
If there are any ideas for an API design that covers both `MergeOperator::ShouldMerge()`'s use cases and `GetMergeOperandsOptions::continue_cb`'s use cases, that would be ideal, but for now this is what I came up with.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12438
Reviewed By: hx235
Differential Revision: D54914669
Pulled By: ajkr
fbshipit-source-id: 5f3ff78d3890adc0b1b74bedf3921221930ce63a
Summary:
... that is more hygienic as an "optional reference" than a raw pointer, and likely more efficient than
std::optional<std::reference_wrapper<T>>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12447
Test Plan: unit test included (with manual verification that "must not compile" sections currently do not)
Reviewed By: jowlyzhang
Differential Revision: D54957917
Pulled By: pdillinger
fbshipit-source-id: bbd89218df803617b1a170ebddc9e56c9b52bf93
Summary:
Crash tests were failing due to data race in accessing `purge_wal_files_last_run_`. This PR changes it to atomic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12439
Test Plan:
- existing UT
- not able to repro with `python3 tools/db_crashtest.py whitebox --simple --max_key=25000000 --WAL_ttl_seconds=1` and TSAN yet, will monitor internal crash tests
Reviewed By: anand1976
Differential Revision: D54920817
Pulled By: cbi42
fbshipit-source-id: 80ee026b1785ad5dba11295ed35c88889df5f5a6
Summary:
This PR adds support for `TimedPut` API. We introduced a new type `kTypeValuePreferredSeqno` for entries added to the DB via the `TimedPut` API.
The life cycle of such an entry on the write/flush/compaction paths are:
1) It is initially added to memtable as:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, write_unix_time}`
2) When it's flushed to L0 sst files, it's converted to:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, preferred_seqno}`
when we have easy access to the seqno to time mapping.
3) During compaction, if certain conditions are met, we swap in the `preferred_seqno` and the entry will become:
`<user_key, preferred_seqno, kTypeValue>: value`. This step helps fast track these entries to the cold tier if they are eligible after the sequence number swap.
On the read path:
A `kTypeValuePreferredSeqno` entry acts the same as a `kTypeValue` entry, the unix_write_time/preferred seqno part packed in value is completely ignored.
Needed follow ups:
1) The seqno to time mapping accessible in flush needs to be extended to cover the `write_unix_time` for possible `kTypeValuePreferredSeqno` entries. This also means we need to track these `write_unix_time` in memtable.
2) Compaction filter support for the new `kTypeValuePreferredSeqno` type for feature parity with other `kTypeValue` and equivalent types.
3) Stress test coverage for the feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12419
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D54920296
Pulled By: jowlyzhang
fbshipit-source-id: c8b43f7a7c465e569141770e93c748371ff1da9e
Summary:
we saw crash test fail with
```
lru_cache.cc:249: void rocksdb::lru_cache::LRUCacheShard::LRU_Remove(rocksdb::lru_cache::LRUHandle *): Assertion `high_pri_pool_usage_ >= e->total_charge' failed.
```
One cause for this is that `lru_low_pri_` pointer is not updated in `LRU_insert()` before we try to balance high pri and low pri pool in `MaintainPoolSize();`. A repro unit test is provided.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12429
Test Plan:
Not able to reproduce the failure with db_stress yet.
`./lru_cache_test --gtest_filter="*InsertAfterReducingCapacity*`. It fails the assertion before this PR.
Reviewed By: pdillinger
Differential Revision: D54908919
Pulled By: cbi42
fbshipit-source-id: f485fdbc0ea61c8092a0be5fe561a59c15c78fd3
Summary:
**Context/Summary:**
Previously manual compaction stress test failures won't terminate stress test. https://github.com/facebook/rocksdb/pull/12414 made more manual compaction failures terminate the stress test for signal boosting. A downside to that PR: some tolerable manual compaction stress test failures also unnecessarily terminate stress test.
Ideally we should exclude exactly those tolerable errors (left as a TODO) from being able to terminate. For now we approximate those errors by Aborted(), InvalidArgument(), NotSupported() etc. It's still an improvement to pre-https://github.com/facebook/rocksdb/pull/12414 situation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12437
Test Plan: - No more tolerable manual compaction stress test failures terminating stress test.
Reviewed By: cbi42
Differential Revision: D54913010
Pulled By: hx235
fbshipit-source-id: c43fa79d8f9c1c8b4f8786f8f46508b0ad619a9e
Summary:
`logger_` can be destructed in `ResetLogger()` so we should access them under `mutex_`. Similarly `status_` can be updated only under `mutex_` or in constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12436
Test Plan: I tried running tsan crash test with log_file_time_to_roll = 2, but not able to repro yet. Will monitor internal crash tests.
Reviewed By: hx235
Differential Revision: D54916371
Pulled By: cbi42
fbshipit-source-id: 4a3e3b40fbc2ae242598afdbd4bed5fb8ccf8d65
Summary:
Issue https://github.com/facebook/rocksdb/issues/12421 describes a regression in the migration from CircleCI to GitHub Actions in which failing build steps no longer fail Windows CI jobs. In GHA with pwsh (new preferred powershell command), only the last non-builtin command (or something like that) affects the overall success/failure result, and failures in external commands do not exit the script, even with `$ErrorActionPreference = 'Stop'` and `$PSNativeCommandErrorActionPreference = $true`. Switching to `powershell` causes some obscure failure (not seen in CircleCI) about the `-Lo` option to `curl`.
Here we work around this using the only reasonable-but-ugly way known: explicitly check the result after every non-trivial build step. This leaves us highly susceptible to future regressions with unchecked build steps in the future, but a clean solution is not known.
This change also fixes the build errors that were allowed to creep in because of the CI regression. Also decreased the unnecessarily long running time of DBWriteTest.WriteThreadWaitNanosCounter.
For background, this problem explicitly contradicts GitHub's documentation, and GitHub has known about the problem for more than a year, with no evidence of caring or intending to fix. https://github.com/actions/runner-images/issues/6668 Somehow CircleCI doesn't have this problem. And even though cmd.exe and powershell have been perpetuating DOS-isms for decades, they still seem to be a somewhat active "hot mess" when it comes to sensible, consistent, and documented behavior.
Fixes https://github.com/facebook/rocksdb/issues/12421
A history of some things I tried in development is here: https://github.com/facebook/rocksdb/compare/main...pdillinger:rocksdb:debug_windows_ci_orig
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12426
Test Plan: CI, including https://github.com/facebook/rocksdb/issues/12434 where I have temporarily enabled other Windows builds on PR with this change
Reviewed By: cbi42
Differential Revision: D54903698
Pulled By: pdillinger
fbshipit-source-id: 116bcbebbbf98f347c7cf7dfdeebeaaed7f76827
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12424
The PR adds a wide-column point lookup API `GetEntityFromBatch` to `WriteBatchWithIndex`. Similarly to APIs like `DB::GetEntity`, this new API returns wide-column entities as-is, and wraps plain values in an entity with a single column (the anonymous default column). Also, similarly to `WriteBatchWithIndex::GetFromBatch`, it only reads data from the batch itself.
Reviewed By: jaykorean
Differential Revision: D54826535
fbshipit-source-id: 92604f3ebd90fe1afbd36f2d2194b7dee0011efa
Summary:
since it been causing a few crash tests failures, I suspect it'll be easy to repro locally. Also fixed how to print its corruption message so it does not crash with output cannot be utf-8 decoded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12431
Reviewed By: hx235
Differential Revision: D54881023
Pulled By: cbi42
fbshipit-source-id: 47208a637cd69b30d2545154849405e37db62ed3
Summary:
**Context/Summary:**
We are doing a sweep in all public options, including but not limited to the `Options`, `Read/WriteOptions`, `IngestExternalFileOptions`, cache options.., to find and add the uncovered ones into db crash. The options included in this PR require minimum changes to db crash other than adding the options themselves.
A bonus change: to surface new issues by improved coverage in stderror, we decided to fail/terminate crash test for manual compactions (CompactFiles, CompactRange()) on meaningful errors. See https://github.com/facebook/rocksdb/pull/12414/files#diff-5c4ced6afb6a90e27fec18ab03b2cd89e8f99db87791b4ecc6fa2694284d50c0R2528-R2532, https://github.com/facebook/rocksdb/pull/12414/files#diff-5c4ced6afb6a90e27fec18ab03b2cd89e8f99db87791b4ecc6fa2694284d50c0R2330-R2336 for more.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12414
Test Plan:
- Run `python3 ./tools/db_crashtest.py --simple blackbox` for 10 minutes to ensure no trivial failure
- Run `python3 tools/db_crashtest.py --simple blackbox --compact_files_one_in=1 --compact_range_one_in=1 --read_fault_one_in=1 --write_fault_one_in=1 --interval=50` for a while to ensure the bonus change does not result in trivial crash/termination of stress test
Reviewed By: ajkr, jowlyzhang, cbi42
Differential Revision: D54691774
Pulled By: hx235
fbshipit-source-id: 50443dfb6aaabd8e24c79a2e42b68c6de877be88
Summary:
This is a temporary workaround for Cmake bug that only sets the correct CMAKE_SYSTEM_PROCESSOR for cross-compilation when target CMAKE_SYSTEM_NAME differs from CMAKE_HOST_NAME:
https://gitlab.kitware.com/cmake/cmake/-/issues/25640
Fix cross-compilation on macOS x86_64 CPUs with target CPU arm64 by manually setting CMAKE_SYSTEM_PROCESSOR to the cross-compilation target whenever CMAKE_SYSTEM_PROCESSOR doesn't match CMAKE_OSX_ARCHITECTURES after project() call. This is probably a Cmake bug that happens on macOS.
Closes https://github.com/facebook/rocksdb/issues/12239
The issue happens when RocksDB is built using the follwoing command:
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_PROCESSOR=arm64 ..
The build itself succeeds, but because Cmake wrongly sets CMAKE_SYSTEM_PROCESSOR to x86_64 instead of arm64 and causes crc32c_arm64.cc not to be compiled.
This in turn makes the project fails any linking with RocksDB:
```
Undefined symbols for architecture arm64:
"crc32c_arm64(unsigned int, unsigned char const*, unsigned long)", referenced from:
rocksdb::crc32c::ExtendARMImpl(unsigned int, char const*, unsigned long) in librocksdb.a(crc32c.cc.o)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12240
Reviewed By: cbi42
Differential Revision: D54811365
Pulled By: pdillinger
fbshipit-source-id: 0958e3092806dadd2f61d582b7251af13a5f3f06
Summary:
https://github.com/facebook/rocksdb/issues/12397 attempted to make the test more honest about its failures, and they're really showing up in CI now (but not locally). Disable pending investigation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12423
Test Plan: watch CI
Reviewed By: ltamasi
Differential Revision: D54817705
Pulled By: pdillinger
fbshipit-source-id: 4721834c49b225ac52d1a28ecb06b9d05de977b3
Summary:
Add `SstFileReader::VerifyNumEntries()` for this purpose. I added the same functionality to `sst_dump` in https://github.com/facebook/rocksdb/issues/12322. Since sst_file_reader.h is exposed to users while sst_dump.h is not, it seems more appropriate to add SST files related APIs here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12418
Test Plan: `./sst_file_reader_test --gtest_filter="*VerifyNumEntries*"`
Reviewed By: jowlyzhang
Differential Revision: D54764271
Pulled By: cbi42
fbshipit-source-id: 22ebfe04bbb0b152762cee13d4210b147b36d3e9
Summary:
The most general `open()` method for each of RocksDB, TtlDB, OptimisticTransactionDB and TransactionDB should
- ensure the default CF is supplied in the list of descriptors
- cache the default CF handle
- store open CF handles for automatic close on DB close
The `close()` method in each of these DB subclasses should `close()` all the owned CF handles.
I can’t find a cleaner way to build some generalised open/close that does this for all DB subclasses, so it exists as cut and paste with variations in the 4 different DB subclasses.
Added some slightly paranoid testing that CF handles explicitly referred to as default in a list of CF handles in the general open methods, and the simple open that doesn’t supply a CF, end up reading and writing to the same CF. Prompted by the fact that this code is a bit opaque; the first returned handle is the DB.
As part of this, fix the bug where the Java side of `OptimisticsTransactionDB` was not setting up default column family; this was visible when setting up an iterator; add a test to validate that the iterator is OK. A single Java reference to the default column family was not being created in the OptimisticsTransactionDB RocksDB subclass; it should be created in all subclasses. The same problem had previously been fixed for TtlDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12417
Reviewed By: ajkr
Differential Revision: D54807643
Pulled By: pdillinger
fbshipit-source-id: 66f34e56a822a009a8f2018d401cf8940d91aa35
Summary:
Seen in https://github.com/facebook/rocksdb/actions/runs/8086592802/job/22096691572?pr=12388
```
[ RUN ] DBTestXactLogIterator.TransactionLogIteratorCheckWhenArchive
db/db_log_iter_test.cc:173:23: runtime error: member call on address 0x0000023956f0 which does not point to an object of type 'rocksdb::DBTestXactLogIterator'
0x0000023956f0: note: object is of type 'rocksdb::DBTestBase'
00 00 00 00 98 ae f7 da 75 7f 00 00 a0 5d 39 02 00 00 00 00 80 ff 39 02 00 00 00 00 95 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'rocksdb::DBTestBase'
UndefinedBehaviorSanitizer: undefined-behavior db/db_log_iter_test.cc:173:23 in
```
This is almost certainly caused by the sync point callback happening on asynchronous file deletion in the DB while the end of the test is reached and the destruction of the `DBTestXactLogIterator` has reached `DBTestBase::~DBTestBase()`. Either closing the DB or disabling sync points before the end of the test should suffice to fix, and we'll do both. And assert that the sync point callback is actually hit each time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12397
Test Plan: unable to reproduce, but ran 1000 iterations of the test with UBSAN
Reviewed By: ltamasi
Differential Revision: D54326687
Pulled By: pdillinger
fbshipit-source-id: cc09a4dcd2f237d5b45d910364d6aa56bbd46d50
Summary:
Add a flag in `IOOptions` to request the file system to make best efforts to detect data corruption and reconstruct the data if possible. This will be used by RocksDB to retry a read if the previous read returns corrupt data (checksum mismatch). Add a new op to `FSSupportedOps` that, if supported, will trigger this behavior in RocksDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12408
Reviewed By: akankshamahajan15
Differential Revision: D54564218
Pulled By: anand1976
fbshipit-source-id: bc401dcd22a7d320bf63b5183c41714acdce39f5
Summary:
When PR https://github.com/facebook/rocksdb/issues/9629 introduced user-defined timestamp support for `WriteCommittedTxn`, it adds this usage mandate for API `GetForUpdate` when UDT is enabled. The `do_validate` flag has to be true, and user should have already called `Transaction::SetReadTimestampForValidation` to set a read timestamp for validation. The rationale behind this mandate is this:
1) with do_vaildate = true, `GetForUpdate` could verify this relationships: let's denote the user-defined timestamp in db for the key as `Ts_db` and the read timestamp user set via `Transaction::SetReadTimestampForValidation` as `Ts_read`. UDT based validation will only pass if `Ts_db <= Ts_read`.
5950907a82/utilities/transactions/transaction_util.cc (L141)
2) Let's denote the committed timestamp set via `Transaction::SetCommitTimestamp` to be `Ts_cmt`. Later `WriteCommitedTxn::Commit` would only pass if this condition is met: `Ts_read < Ts_cmt`. 5950907a82/utilities/transactions/pessimistic_transaction.cc (L431)
Together these two checks can ensure `Ts_db < Ts_cmt` to meet the user-defined timestamp invariant that newer timestamp should have newer sequence number.
The `do_validate` flag was originally intended to make snapshot based validation optional. If it's true, `GetForUpdate` checks no entry is written after the snapshot. If it's false, it will skip this snapshot based validation. In this PR, we are making the UDT based validation configurable too based on this flag instead of mandating it for below reasons: 1) in some cases the users themselves can enforce aformentioned invariant on their side independently, without RocksDB help, for example, if they are managing a monotonically increasing timestamp, and their transactions are only committed in a single thread. So they don't need this UDT based validation and wants to skip it, 2) It also could be expensive or not practical for users to come up with such a read timestamp that is exactly in between their commit timestamp and the db's timestamp. For example, in aformentioned case where a monotonically increasing timestamp is managed, the users would need to access this timestamp both for setting the read timestamp and for setting the commit timestamp. So it's preferable to skip this check too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12369
Test Plan: added unit tests
Reviewed By: ltamasi
Differential Revision: D54268920
Pulled By: jowlyzhang
fbshipit-source-id: ca7693796f9bb11f376a2059d91841e51c89435a
Summary:
This PR updates `VersionEditHandlerPointInTime` to recover all or none of the updates in an AtomicGroup. This makes best-effort recovery properly handle atomic flushes during recovery, so the features are now allowed to both be enabled at once.
The new logic requires that AtomicGroups do not contain column family additions or removals. AtomicGroups are currently written for atomic flush, which does not include such edits.
Column family additions or removals are recovered independently of AtomicGroups. The new logic needs to be aware of removal, though, so that a dropped CF does not prevent completion of an AtomicGroup recovery.
The new logic treats each AtomicGroup as if it contains updates for all existing column families, even though it is possible to create AtomicGroups that only affect a subset of column families. This simplifies the logic at the expense of recovering less data in certain edge case scenarios.
The usage of `MaybeCreateVersion()` is pretty tricky. The goal is to create a barrier at the start of an AtomicGroup such that all valid states up to that point will be applied to `versions_`. Here is a summary.
- `MaybeCreateVersion(..., false)` creates a `Version` on a negative edge trigger (transition from valid to invalid). It was previously called when applying each update. Now, it is only called when applying non-AtomicGroup updates.
- `MaybeCreateVersion(..., true)` creates a `Version` on a positive level trigger (valid state). It was previously called only at the end of iteration. Now, it is additionally called before processing an AtomicGroup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12406
Reviewed By: jaykorean, cbi42
Differential Revision: D54494904
Pulled By: ajkr
fbshipit-source-id: 0114a9fe1d04b471d086dcab5978ea8a3a56ad52
Summary:
Partly following up on leftovers from https://github.com/facebook/rocksdb/issues/12388
In terms of public API:
* Make it clear that IngestExternalFileArg::file_temperature is just a hint for opening the existing file, though it was previously used for both copy-from temp hint and copy-to temp, which was bizarre.
* Specify how IngestExternalFile assigns temperature to file ingested into DB. (See details in comments.) This approach is not perfect in terms of matching how the DB assigns temperatures, but was the simplest way to get close. The key complication for matching DB temperature assignments is that ingestion files are copied (to a destination temp) before their target level is determined (in general).
* Add a temperature option to SstFileWriter::Open so that files intended for ingestion can be initially written to a chosen temperature.
* Note that "fail_if_not_bottommost_level" is obsolete/confusing use of "bottommost"
In terms of the implementation, there was a similar bit of oddness with the internal CopyFile API, which only took one temperature, ambiguously applicable to the source, destination, or both. This is also fixed.
Eventual suggested follow-up:
* Before copying files for ingestion, determine a tentative level assignment to use for destination temperature, and keep that even if final level assignment happens to be different at commit time (rare).
* More temperature handling for CreateColumnFamilyWithImport and Checkpoints.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12402
Test Plan:
Deeply revamped
ExternalSSTFileBasicTest.IngestWithTemperature to test the new changes. Previously this test was insufficient because it was only looking at temperatures according to the DB manifest. Incorporating FileTemperatureTestFS allows us to also test the temperatures in the storage layer.
Used macros instead of functions for better tracing to critical source location on test failures.
Some enhancements to FileTemperatureTestFS in the process of developing the revamped test.
Reviewed By: jowlyzhang
Differential Revision: D54442794
Pulled By: pdillinger
fbshipit-source-id: 41d9d0afdc073e6a983304c10bbc07c70cc7e995
Summary:
This PR introduces a new implementation of `Iterator` via a new public API called `NewMultiCfIterator()`. The new API takes a vector of column family handles to build a cross-column-family iterator, which internally maintains multiple `DBIter`s as child iterators from a consistent database state. When a key exists in multiple column families, the iterator selects the value (and wide columns) from the first column family containing the key, following the order provided in the `column_families` parameter. Similar to the merging iterator, a min heap is used to iterate across the child iterators. Backward iteration and direction change functionalities will be implemented in future PRs.
The comparator used to compare keys across different column families will be derived from the iterator of the first column family specified in `column_families`. This comparator will be checked against the comparators from all other column families that the iterator will traverse. If there's a mismatch with any of the comparators, the initialization of the iterator will fail.
Please note that this PR is not enough for users to start using `MultiCfIterator`. The `MultiCfIterator` and related APIs are still marked as "**DO NOT USE - UNDER CONSTRUCTION**". This PR is just the first of many PRs that will follow soon.
This PR includes the following:
- Introduction and partial implementation of the `MultiCfIterator`, which implements the generic `Iterator` interface. The implementation includes the construction of the iterator, `SeekToFirst()`, `Next()`, `Valid()`, `key()`, `value()`, and `columns()`.
- Unit tests to verify iteration across multiple column families in two distinct scenarios: (1) keys are unique across all column families, and (2) the same keys exist in multiple column families.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12153
Reviewed By: pdillinger
Differential Revision: D52308697
Pulled By: jaykorean
fbshipit-source-id: b03e69f13b40af5a8f0598d0f43a0bec01ef8294
Summary:
When compiling with `-DNROCKSDB_THREAD_STATUS`, some functions in ThreadStatusUtil are declared but their definition is missing. Their definitions are only compiled when not defining `NROCKSDB_THREAD_STATUS`. This causes problems on linking, when the linker cannot find the definitions of
- ThreadStatusUtil::GetThreadOperation
- ThreadStatusUtil::SetEnableTracking
This PR fixes it by adding stubs for these functions in case `NROCKSDB_THREAD_STATUS` is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12400
Reviewed By: ajkr
Differential Revision: D54510769
Pulled By: cbi42
fbshipit-source-id: e79e9257492d3dba59615e9e306df7e79838d73b
Summary:
When internal cpp modernizer attempts to format rocksdb code, it will replace macro `ROCKSDB_NAMESPACE` with its default definition `rocksdb` when collapsing nested namespace. We filed a feedback for the tool T180254030 and the team filed a bug for this: https://github.com/llvm/llvm-project/issues/83452. At the same time, they suggested us to run the modernizer tool ourselves so future auto codemod attempts will be smaller. This diff contains:
Running
`xplat/scripts/codemod_service/cpp_modernizer.sh`
in fbcode/internal_repo_rocksdb/repo (excluding some directories in utilities/transactions/lock/range/range_tree/lib that has a non meta copyright comment)
without swapping out the namespace macro `ROCKSDB_NAMESPACE`
Followed by RocksDB's own
`make format`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12398
Test Plan: Auto tests
Reviewed By: hx235
Differential Revision: D54382532
Pulled By: jowlyzhang
fbshipit-source-id: e7d5b40f9b113b60e5a503558c181f080b9d02fa
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D54362208
fbshipit-source-id: a47acd4c794c899fccb65285b116b50d9566ea12
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D54362213
fbshipit-source-id: 0bbc9e5fce917fc4f72423f0a4c8cb2c2b1759dd
Summary:
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR https://github.com/facebook/rocksdb/issues/12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: https://github.com/facebook/rocksdb/issues/11925#11943, and https://github.com/facebook/rocksdb/issues/11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12395
Test Plan:
# Summary
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR #12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: #11925#11943, and #11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
# Test Plan
There should be no behavior changes. Existing tests and CI for the correctness tests.
**Test for Perf Regression**
Build
```
$> make -j64 release
```
Setup
```
$> TEST_TMPDIR=/dev/shm/db_bench ./db_bench -benchmarks="filluniquerandom" -key_size=32 -value_size=512 -num=1000000 -compression_type=none
```
Run
```
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -use_existing_db=1 -benchmarks="newiterator,seekrandom" -cache_size=10485760000
```
Before the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.552 micros/op 1810157 ops/sec 0.552 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.502 micros/op 222143 ops/sec 4.502 seconds 1000000 operations; (0 of 1000000 found)
```
After the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.520 micros/op 1924401 ops/sec 0.520 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.532 micros/op 220657 ops/sec 4.532 seconds 1000000 operations; (0 of 1000000 found)
```
Reviewed By: pdillinger
Differential Revision: D54332713
Pulled By: jaykorean
fbshipit-source-id: b28d897ad519e58b1ca82eb068a6319544a4fae5
Summary:
The current design proposes using a combination of `job_id`, `db_id`, and `db_session_id` to create a unique identifier for remote compaction jobs. However, this approach may not be suitable for users who prefer a different format for the unique identifier.
At Meta, we are utilizing generic compute offload to offload compaction tasks to remote workers. The compute offload client generates a UUID for each task, which requires an update to the current RocksDB API for onboarding purposes.
Users still have the option to create the unique identifier by combining `job_id`, `db_id`, and `db_session_id` if they prefer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12384
Test Plan:
```
$> ./compaction_service_test 13:29:35
[==========] Running 14 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 14 tests from CompactionServiceTest
[ RUN ] CompactionServiceTest.BasicCompactions
[ OK ] CompactionServiceTest.BasicCompactions (2642 ms)
[ RUN ] CompactionServiceTest.ManualCompaction
[ OK ] CompactionServiceTest.ManualCompaction (454 ms)
[ RUN ] CompactionServiceTest.CancelCompactionOnRemoteSide
[ OK ] CompactionServiceTest.CancelCompactionOnRemoteSide (1643 ms)
[ RUN ] CompactionServiceTest.FailedToStart
[ OK ] CompactionServiceTest.FailedToStart (1332 ms)
[ RUN ] CompactionServiceTest.InvalidResult
[ OK ] CompactionServiceTest.InvalidResult (1516 ms)
[ RUN ] CompactionServiceTest.SubCompaction
[ OK ] CompactionServiceTest.SubCompaction (551 ms)
[ RUN ] CompactionServiceTest.CompactionFilter
[ OK ] CompactionServiceTest.CompactionFilter (563 ms)
[ RUN ] CompactionServiceTest.Snapshot
[ OK ] CompactionServiceTest.Snapshot (124 ms)
[ RUN ] CompactionServiceTest.ConcurrentCompaction
[ OK ] CompactionServiceTest.ConcurrentCompaction (660 ms)
[ RUN ] CompactionServiceTest.CompactionInfo
[ OK ] CompactionServiceTest.CompactionInfo (984 ms)
[ RUN ] CompactionServiceTest.FallbackLocalAuto
[ OK ] CompactionServiceTest.FallbackLocalAuto (343 ms)
[ RUN ] CompactionServiceTest.FallbackLocalManual
[ OK ] CompactionServiceTest.FallbackLocalManual (380 ms)
[ RUN ] CompactionServiceTest.RemoteEventListener
[ OK ] CompactionServiceTest.RemoteEventListener (491 ms)
[ RUN ] CompactionServiceTest.TablePropertiesCollector
[ OK ] CompactionServiceTest.TablePropertiesCollector (169 ms)
[----------] 14 tests from CompactionServiceTest (11854 ms total)
[----------] Global test environment tear-down
[==========] 14 tests from 1 test case ran. (11855 ms total)
[ PASSED ] 14 tests.
```
Reviewed By: hx235
Differential Revision: D54220339
Pulled By: jaykorean
fbshipit-source-id: 5a9054f31933d1996adca02082eb37b6d5353224
Summary:
.. so write time can be measured under the new perf level for single-threaded writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12394
Test Plan: * add a new UT `PerfContextTest.WriteMemtableTimePerfLevel`
Reviewed By: anand1976
Differential Revision: D54326263
Pulled By: cbi42
fbshipit-source-id: d0e334d9581851ba6cf53c776c0bd876365d1e00
Summary:
Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats.
This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply.
Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction.
Needed follow-up: Fix temperature handling with external file ingestion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388
Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.)
Reviewed By: jowlyzhang
Differential Revision: D54266574
Pulled By: pdillinger
fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb
Summary:
Fix some issues introduced in https://github.com/facebook/rocksdb/pull/12199 (CC rhubner)
1. Previous `jar -v -c -f` was not valid command syntax.
2. Javadoc and source Jar files were prefixed `rocksdb-`, now corrected to `rocksdbjni-`
pdillinger This needs to be merged to `main` and also `8.11.fb` (to fix the Windows build for the RocksJava release of 8.11.2) please.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12371
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D54136834
Pulled By: hx235
fbshipit-source-id: f356f2401042af359ada607e5f0be627418ccd6c
Summary:
Reorder writers list to allow a leader can take as more commits as possible to maximize the throughput of the system and reduce IOPS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12138
Reviewed By: hx235
Differential Revision: D53955592
Pulled By: ajkr
fbshipit-source-id: 4d899d038faef691b63801d9d85f5cc079b7bbb5
Summary:
When the rate limiter does not have any waiting requests, the first request to arrive may consume all of the available bandwidth, despite potentially having lower priority than requests that arrive later in the same refill interval. Then, those higher priority requests must wait for a refill. So even in scenarios in which we have an overall bandwidth surplus, the highest priority requests can be sporadically delayed up to a whole refill period.
Alone, this isn't necessarily problematic as the refill period is configurable via `refill_period_us` and can be tuned down as needed until the max sporadic delay is tolerable. However, tuning down `refill_period_us` had a side effect of reducing burst size. Some users require a certain burst size to issue optimal I/O sizes to the underlying storage system.
To satisfy those users, this PR decouples the refill period from the burst size. That way, the max sporadic delay can be limited without impacting I/O sizes issued to the underlying storage system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12379
Test Plan:
The goal is to show we can now limit the max sporadic delay without impacting compaction's I/O size.
The benchmark runs compaction with a large I/O size, while user reads simultaneously run at a low rate that does not consume all of the available bandwidth. The max sporadic delay is measured using the P100 of rocksdb.file.read.get.micros. I just used strace to verify the compaction reads follow `rate_limiter_single_burst_bytes`
Setup: `./db_bench -benchmarks=fillrandom,flush -write_buffer_size=67108864 -disable_auto_compactions=true -value_size=256 -num=1048576`
Benchmark: `./db_bench -benchmarks=readrandom -use_existing_db=true -num=1048576 -duration=10 -benchmark_read_rate_limit=4096 -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -rate_limit_user_ops=true -statistics=true -cache_size=0 -stats_level=5 -compaction_readahead_size=16777216 -use_direct_reads=true`
Results:
refill_micros | rocksdb.file.read.get.micros (P100)
-- | --
10000 | 10802
100000 | 100240
1000000 | 922061
For verifying compaction read sizes: `strace -fye pread64 ./db_bench -benchmarks=compact -use_existing_db=true -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -compaction_readahead_size=16777216 -use_direct_reads=true`
Reviewed By: hx235
Differential Revision: D54165675
Pulled By: ajkr
fbshipit-source-id: c5968486316cbfb7ff8e5b7d75d3589883dd1105
