Summary:
Add a new option that can be used to set a specific compression algorithm for bottommost level.
This option will only affect levels larger than base level.
I have also updated CompactionJobInfo to include the compression algorithm used in compaction
Test Plan:
added new unittest
existing unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: lightmark, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D57669
Summary:
Add an option `iterator_readahead_size` to `ReadOptions` to enable
configurable readahead for iterators similar to the corresponding
option for compaction.
Test Plan:
```
make commit_prereq
```
Reviewers: kumar.rangarajan, ott, igor, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55419
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
Summary:
This interface is redundant and has been deprecated for a while.
It's also unused internally. Let's delete it.
I moved the comments to the corresponding functions in BackupEngine/
BackupEngineReadOnly. This caused the diff tool to not work cleanly.
Test Plan:
unit tests
$ ./backupable_db_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56331
Summary: It is useful to print out IO stats in flush jobs too. Extend options.compaction_measure_io_stats to flush jobs and raname it.
Test Plan: Try db_bench and see the stats are printed out.
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: kradhakrishnan, yiwu, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56769
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary: BlockBasedTableOptions.format_version = 2 uses better encoding format. Now it's the time to make it default.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54879
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Time to cut branch for release 4.5. Change the versions.
Test Plan: Not needed
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53883
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary:
Add an option --column_family option, so that users can query or update specific column family.
Also add an create column family parameter to make unit test easier.
Still need to add unit tests.
Test Plan: Will add a test case in ldb python test.
Reviewers: yhchiang, rven, andrewkr, IslamAbdelRahman, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53265
Summary: Timing mutex operations can impact scalability of the system. Add a new perf context level that can measure time counters except for mutex.
Test Plan: Add a new unit test case to make sure it is not set.
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, yhchiang, anthony
Reviewed By: anthony
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53199
Summary:
This set of changes implements the following design: `ldb` will utilize `--path` parameter which can be used to specify a file name. Tool will then apply some heuristic to determine how to output the data properly. The design decision is not to probe the file content, but use file names to determine what dumping function to call.
Usage examples:
Understands that path points to a manifest file and dumps it.
`./ldb --path=/tmp/test_db/MANIFEST-000023 dump`
Understands that path points to a WAL file and dumps it.
`./ldb --path=/tmp/test_db/000024.log dump --header`
Understands that path points to a SST file and dumps it.
`./ldb --path=/tmp/test_db/000007.sst dump`
Figures out that none of the supported file types are applicable and outputs
an appropriate error message.
`./ldb --path=/tmp/cron.log dump`
Test Plan:
Basics:
git diff
make clean
make -j 32 commit-prereq
arc lint
More specific testing (done as part of commit-prereq, but can be iterated separately when making isolated changes):
make clean
make ldb
python tools/ldb_test.py
make rocksdb_dump
make rocksdb_undump
sh tools/rocksdb_dump_test.sh
Reviewers: rven, IslamAbdelRahman, yhchiang, kradhakrishnan, anthony, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52269
Summary: We now have a mechanism to further slowdown writes. Double default options.delayed_write_rate to try to keep the default behavior closer to it used to be.
Test Plan: Run all tests.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yhchiang, kradhakrishnan, rven, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52281
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
Add CompactionReason to CompactionJobInfo
This will allow users to understand why compaction started which will help options tuning
Test Plan:
added new tests
make check -j64
Reviewers: yhchiang, anthony, kradhakrishnan, sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51975
Summary: Now if inserting to mem table is much faster than writing to files, there is no mechanism users can rely on to avoid stopping for reaching options.max_write_buffer_number. With the commit, if there are more than four maximum write buffers configured, we slow down to the rate of options.delayed_write_rate while we reach the last one.
Test Plan:
1. Add a new unit test.
2. Run db_bench with
./db_bench --benchmarks=fillrandom --num=10000000 --max_background_flushes=6 --batch_size=32 -max_write_buffer_number=4 --delayed_write_rate=500000 --statistics
based on hard drive and see stopping is avoided with the commit.
Reviewers: yhchiang, IslamAbdelRahman, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52047
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: Introduce a compaction picking priority that picks files who contains the oldest rows to compact. This is a mode that slightly improves write amplification for random update cases.
Test Plan: Add a unit test and run it in valgrind too.
Reviewers: yhchiang, anthony, IslamAbdelRahman, rven, kradhakrishnan, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51459
Summary: When option.db_write_buffer_size is hit, we currently flush all column families. Move to flush the column family with the largest active memt table instead. In this way, we can avoid too many small files in some cases.
Test Plan: Modify test DBTest.SharedWriteBuffer to work with the updated behavior
Reviewers: kradhakrishnan, yhchiang, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: march, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51291
Summary:
Provide an API for compaction filter to specify that it needs
to be applied even if there are snapshots.
Test Plan: DBTestCompactionFilter.CompactionFilterIgnoreSnapshot
Reviewers: yhchiang, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51087
Summary:
Add CheckOptionsCompatibility() API to options_util that returns
Status::OK if the input DBOptions and ColumnFamilyDescriptors
are compatible with the latest options stored in the specified DB path.
Test Plan: Added tests in options_util_test
Reviewers: igor, anthony, IslamAbdelRahman, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50649
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Move some of the items in public API changes section to to new
features section.
Test Plan: no code change.
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50229
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs
Test Plan: Added a test in db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49497
Summary:
CreateLoggerFromOptions have some parameters like db_log_dir and env, these parameters are redundant since they already exist in DBOptions
this patch remove the redundant parameters and expose CreateLoggerFromOptions to users
Test Plan: make check
Reviewers: igor, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D49713
Summary: DefaultCompactionFilterFactory is not used anymore after recent changes. Remove it.
Test Plan: Just run existing tests.
Reviewers: rven, igor, yhchiang, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48699
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary: With this commit, we add a new format in manifest when adding a new file. Now path ID and need-compaction hint are first two customized fields.
Test Plan: Add a test case in version_edit_test to verify the encoding and decoding logic. Add a unit test in db_test to verify need compaction is persistent after DB restarting.
Reviewers: kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, rven, igor
Reviewed By: igor
Subscribers: javigon, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48123
Summary: Add the column family ID to compaction filter context, so it is easier for compaction filter to apply different logic for different column families.
Test Plan: Add a unit test to verify the column family ID passed is correct.
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48357
Summary: Change RocksDB version to 4.1
Test Plan: no code change.
Reviewers: sdong, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48387
Summary:
Two changes:
1. remove *V2 filter stuff. we deprecated that a while ago
2. clarify what happens when user sets max_subcompactions to bigger than 1
Test Plan: none
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47871
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
