Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
This fix is to replace `AllocateBlock()` with `new`. Once I figure out why `AllocateBlock()` might cause the segfault, I will update the implementation.
Fix the bug that causes ./compressed_secondary_cache_test output following test failures:
```
Note: Google Test filter = CompressedSecondaryCacheTest.MergeChunksIntoValueTest
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from CompressedSecondaryCacheTest
[ RUN ] CompressedSecondaryCacheTest.MergeChunksIntoValueTest
[ OK ] CompressedSecondaryCacheTest.MergeChunksIntoValueTest (1 ms)
[----------] 1 test from CompressedSecondaryCacheTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (9 ms total)
[ PASSED ] 1 test.
t/run-compressed_secondary_cache_test-CompressedSecondaryCacheTest.MergeChunksIntoValueTest: line 4: 1091086 Segmentation fault (core dumped) TEST_TMPDIR=$d ./compressed_secondary_cache_test --gtest_filter=CompressedSecondaryCacheTest.MergeChunksIntoValueTest
Note: Google Test filter = CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from CompressedSecondaryCacheTest
[ RUN ] CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
[ OK ] CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression (1 ms)
[----------] 1 test from CompressedSecondaryCacheTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (2 ms total)
[ PASSED ] 1 test.
t/run-compressed_secondary_cache_test-CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression: line 4: 1090883 Segmentation fault (core dumped) TEST_TMPDIR=$d ./compressed_secondary_cache_test --gtest_filter=CompressedSecondaryCacheTest.BasicTestWithMemoryAllocatorAndCompression
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10507
Test Plan:
Test 1:
```
$make -j 24
$./compressed_secondary_cache_test
```
Test 2:
```
$COMPILE_WITH_ASAN=1 make -j 24
$./compressed_secondary_cache_test
```
Test 3:
```
$COMPILE_WITH_TSAN=1 make -j 24
$./compressed_secondary_cache_test
```
Reviewed By: anand1976
Differential Revision: D38529885
Pulled By: gitbw95
fbshipit-source-id: d903fa3fadbd4d29f9528728c63a4f61c4396890
Summary:
We have recently added caching support to BlobDB, and separately,
implemented an optimization where reading blobs from the cache
results in the cache handle being transferred to the target `PinnableSlice`
(as opposed to the contents getting copied). With these changes,
it makes sense to reset the `PinnableSlice` storing the blob value in
`DBIter` as soon as we move to a different iterator position to prevent
us from holding on to the cache handle any longer than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10490
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38473630
Pulled By: ltamasi
fbshipit-source-id: 84c045ffac76436c6152fd0f5775b007f4051386
Summary:
Change tiered compaction feature from `bottommost_temperture` to
`last_level_temperture`. The old option is kept for migration purpose only,
which is behaving the same as `last_level_temperture` and it will be removed in
the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10471
Test Plan: CI
Reviewed By: siying
Differential Revision: D38450621
Pulled By: jay-zhuang
fbshipit-source-id: cc1cdf8bad409376fec0152abc0a64fb72a91527
Summary:
Current universal compaction picker may cause extra size amplification
compaction if there're more hot data on penultimate level. Improve the picker
to skip the last level for size amp calculation if tiered compaction is
enabled, which can
1. avoid extra unnecessary size amp compaction;
2. typically cold tier (the last level) is not size constrained, so skip size
amp for cold tier is intended;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10467
Test Plan: CI and added unittest
Reviewed By: siying
Differential Revision: D38391350
Pulled By: jay-zhuang
fbshipit-source-id: 103c0731c05e0a7e8f267e9e829d022328be25d2
Summary:
lambda function dynamicly allocates memory from heap if it needs to
capture multiple values, which could be expensive.
Switch to explictly use local functor from stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10453
Test Plan:
CI
db_bench shows ~2-3% read improvement:
```
# before the change
TEST_TMPDIR=/tmp/dbbench4 ./db_bench_main --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.528 micros/op 117265 ops/sec 85.277 seconds 10000000 operations; 13.0 MB/s (10000000 of 10000000 found)
# after the change
TEST_TMPDIR=/tmp/dbbench5 ./db_bench_new --benchmarks=filluniquerandom,readrandom -compression_type=none -max_background_jobs=12 -num=10000000
readrandom : 8.263 micros/op 121015 ops/sec 82.634 seconds 10000000 operations; 13.4 MB/s (10000000 of 10000000 found)
```
details: https://gist.github.com/jay-zhuang/5ac0628db8fc9cbcb499e056d4cb5918
Micro-benchmark shows a similar improvement ~1-2%:
before the change:
https://gist.github.com/jay-zhuang/9dc0ebf51bbfbf4af82f6193d43cf75b
after the change:
https://gist.github.com/jay-zhuang/fc061f1813cd8f441109ad0b0fe7c185
Reviewed By: ajkr
Differential Revision: D38345056
Pulled By: jay-zhuang
fbshipit-source-id: f3597aeeee338a804d37bf2e81386d5a100665e0
Summary:
- Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact.
- db_bench is updated to print out the number of range deletions executed if there is any.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380
Test Plan:
- CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed.
- Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable.
```
single thread:
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100
multi_thread
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100
```
Commit 99cdf16464 is included in benchmark result. It was an earlier attempt where tombstones are fragmented for each write operation. Reader threads share it using a shared_ptr which would slow down multi-thread read performance as seen in benchmark results.
Results are averaged over 5 runs.
Single thread result:
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |6.68 |6.57 |6.72 |4.72 |4.79 |4.54 |
| 1 |6.67 |6.58 |6.62 |5.41 |4.74 |4.72 |
| 10 |6.59 |6.5 |6.56 |7.83 |4.69 |4.59 |
| 100 |6.62 |6.75 |6.58 |29.57 |5.04 |5.09 |
| 1000 |6.54 |6.82 |6.61 |320.33 |5.22 |5.21 |
32-thread result: note that "Max # tombstones" is per thread.
| Max # tombstones | main fillrandom micros/op | 99cdf16464 | Post PR | main readrandom micros/op | 99cdf16464 | Post PR |
| ------------- | ------------- |------------- |------------- |------------- |------------- |------------- |
| 0 |234.52 |260.25 |239.42 |5.06 |5.38 |5.09 |
| 1 |236.46 |262.0 |231.1 |19.57 |22.14 |5.45 |
| 10 |236.95 |263.84 |251.49 |151.73 |21.61 |5.73 |
| 100 |268.16 |296.8 |280.13 |2308.52 |22.27 |6.57 |
Reviewed By: ajkr
Differential Revision: D37916564
Pulled By: cbi42
fbshipit-source-id: 05d6d2e16df26c374c57ddcca13a5bfe9d5b731e
Summary:
Currently, `SetIsInSecondaryCache` is after `Promote`. After `Promote`, a handle can be accessed and its flags can be set. This causes data race.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10472
Test Plan:
unit tests
stress tests
Reviewed By: pdillinger
Differential Revision: D38403991
Pulled By: gitbw95
fbshipit-source-id: 0aaa2d2edeaf5bc799fcce605648fe49eb7119c2
Summary:
### **Summary:**
To minimize the internal fragmentation caused by the variable size of the compressed blocks, the original block is split according to the jemalloc bin size in `Insert()` and then merged back in `Lookup()`. Based on the analysis of the results of the following tests, from the overall internal fragmentation perspective, this PR does mitigate the internal fragmentation issue.
_Do more myshadow tests with the latest commit. I finished several myshadow AB Testing and the results are promising. For the config of 4GB primary cache and 3GB secondary cache, Jemalloc resident stats shows consistently ~0.15GB memory saving; the allocated and active stats show similar memory savings. The CPU usage is almost the same before and after this PR._
To evaluate the issue of memory fragmentations and the benefits of this PR, I conducted two sets of local tests as follows.
**T1**
Keys: 16 bytes each (+ 0 bytes user-defined timestamp)
Values: 100 bytes each (50 bytes after compression)
Entries: 90000000
RawSize: 9956.4 MB (estimated)
FileSize: 5664.8 MB (estimated)
| Test Name | Primary Cache Size (MB) | Compressed Secondary Cache Size (MB) |
| - | - | - |
| T1_3 | 4000 | 4000 |
| T1_4 | 2000 | 3000 |
Populate the DB:
./db_bench --benchmarks=fillrandom --num=90000000 -db=/mem_fragmentation/db_bench_1
Overwrite it to a stable state:
./db_bench --benchmarks=overwrite --num=90000000 -use_existing_db -db=/mem_fragmentation/db_bench_1
Run read tests with differnt cache setting:
T1_3:
MALLOC_CONF="prof:true,prof_stats:true" ../rocksdb/db_bench --benchmarks=seekrandom --threads=16 --num=90000000 -use_existing_db --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=4000000000 -compressed_secondary_cache_size=4000000000 -use_compressed_secondary_cache -db=/mem_fragmentation/db_bench_1 --print_malloc_stats=true > ~/temp/mem_frag/20220710/jemalloc_stats_json_T1_3_20220710 -duration=1800 &
T1_4:
MALLOC_CONF="prof:true,prof_stats:true" ../rocksdb/db_bench --benchmarks=seekrandom --threads=16 --num=90000000 -use_existing_db --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=2000000000 -compressed_secondary_cache_size=3000000000 -use_compressed_secondary_cache -db=/mem_fragmentation/db_bench_1 --print_malloc_stats=true > ~/temp/mem_frag/20220710/jemalloc_stats_json_T1_4_20220710 -duration=1800 &
For T1_3 and T1_4, I also conducted the tests before and after this PR. The following table show the important jemalloc stats.
| Test Name | T1_3 | T1_3 after mem defrag | T1_4 | T1_4 after mem defrag |
| - | - | - | - | - |
| allocated (MB) | 8728 | 8076 | 5518 | 5043 |
| available (MB) | 8753 | 8092 | 5536 | 5051 |
| external fragmentation rate | 0.003 | 0.002 | 0.003 | 0.0016 |
| resident (MB) | 8956 | 8365 | 5655 | 5235 |
**T2**
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 256 bytes each (128 bytes after compression)
Entries: 40000000
RawSize: 10986.3 MB (estimated)
FileSize: 6103.5 MB (estimated)
| Test Name | Primary Cache Size (MB) | Compressed Secondary Cache Size (MB) |
| - | - | - |
| T2_3 | 4000 | 4000 |
| T2_4 | 2000 | 3000 |
Create DB (10GB):
./db_bench -benchmarks=fillrandom -use_direct_reads=true -num=40000000 -key_size=32 -value_size=256 -db=/mem_fragmentation/db_bench_2
Overwrite it to a stable state:
./db_bench --benchmarks=overwrite --num=40000000 -use_existing_db -key_size=32 -value_size=256 -db=/mem_fragmentation/db_bench_2
Run read tests with differnt cache setting:
T2_3:
MALLOC_CONF="prof:true,prof_stats:true" ./db_bench --benchmarks="mixgraph" -use_direct_io_for_flush_and_compaction=true -use_direct_reads=true -cache_size=4000000000 -compressed_secondary_cache_size=4000000000 -use_compressed_secondary_cache -keyrange_dist_a=14.18 -keyrange_dist_b=-2.917 -keyrange_dist_c=0.0164 -keyrange_dist_d=-0.08082 -keyrange_num=30 -value_k=0.2615 -value_sigma=25.45 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.85 -mix_put_ratio=0.14 -mix_seek_ratio=0.01 -sine_mix_rate_interval_milliseconds=5000 -sine_a=1000 -sine_b=0.000073 -sine_d=400000 -reads=80000000 -num=40000000 -key_size=32 -value_size=256 -use_existing_db=true -db=/mem_fragmentation/db_bench_2 --print_malloc_stats=true > ~/temp/mem_frag/jemalloc_stats_T2_3 -duration=1800 &
T2_4:
MALLOC_CONF="prof:true,prof_stats:true" ./db_bench --benchmarks="mixgraph" -use_direct_io_for_flush_and_compaction=true -use_direct_reads=true -cache_size=2000000000 -compressed_secondary_cache_size=3000000000 -use_compressed_secondary_cache -keyrange_dist_a=14.18 -keyrange_dist_b=-2.917 -keyrange_dist_c=0.0164 -keyrange_dist_d=-0.08082 -keyrange_num=30 -value_k=0.2615 -value_sigma=25.45 -iter_k=2.517 -iter_sigma=14.236 -mix_get_ratio=0.85 -mix_put_ratio=0.14 -mix_seek_ratio=0.01 -sine_mix_rate_interval_milliseconds=5000 -sine_a=1000 -sine_b=0.000073 -sine_d=400000 -reads=80000000 -num=40000000 -key_size=32 -value_size=256 -use_existing_db=true -db=/mem_fragmentation/db_bench_2 --print_malloc_stats=true > ~/temp/mem_frag/jemalloc_stats_T2_4 -duration=1800 &
For T2_3 and T2_4, I also conducted the tests before and after this PR. The following table show the important jemalloc stats.
| Test Name | T2_3 | T2_3 after mem defrag | T2_4 | T2_4 after mem defrag |
| - | - | - | - | - |
| allocated (MB) | 8425 | 8093 | 5426 | 5149 |
| available (MB) | 8489 | 8138 | 5435 | 5158 |
| external fragmentation rate | 0.008 | 0.0055 | 0.0017 | 0.0017 |
| resident (MB) | 8676 | 8392 | 5541 | 5321 |
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10287
Test Plan: Unit tests.
Reviewed By: anand1976
Differential Revision: D37743362
Pulled By: gitbw95
fbshipit-source-id: 0010c5af08addeacc5ebbc4ffe5be882fb1d38ad
Summary:
TL;DR: due to a recent change, if you drop a column family,
often that DB will no longer fsync after writing new SST files
to remaining or new column families, which could lead to data
loss on power loss.
More bug detail:
The intent of https://github.com/facebook/rocksdb/issues/10049 was to Close FSDirectory objects at
DB::Close time rather than waiting for DB object destruction.
Unfortunately, it also closes shared FSDirectory objects on
DropColumnFamily (& destroy remaining handles), which can lead
to use-after-Close on FSDirectory shared with remaining column
families. Those "uses" are only Fsyncs (or redundant Closes). In
the default Posix filesystem, an Fsync on a closed FSDirectory is a
quiet no-op. Consequently (under most configurations), if you drop
a column family, that DB will no longer fsync after writing new SST
files to column families sharing the same directory (true under most
configurations).
More fix detail:
Basically, this removes unnecessary Close ops on destroying
ColumnFamilyData. We let `shared_ptr` take care of calling the
destructor at the right time. If the intent was to require Close be
called before destroying FSDirectory, that was not made clear by the
author of FileSystem and was not at all enforced by https://github.com/facebook/rocksdb/issues/10049, which
could have added `assert(fd_ == -1)` to `~PosixDirectory()` but did
not. To keep this fix simple, we relax the unit test for https://github.com/facebook/rocksdb/issues/10049 to allow
timely destruction of FSDirectory to suffice as Close (in
CountedFileSystem). Added a TODO to revisit that.
Also in this PR:
* Added a TODO to share FSDirectory instances between DB and its column
families. (Already shared among column families.)
* Made DB::Close attempt to close all its open FSDirectory objects even
if there is a failure in closing one. Also code clean-up around this
logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10460
Test Plan:
add an assert to check for use-after-Close. With that
existing tests can detect the misuse. With fix, tests pass (except noted
relaxing of unit test for https://github.com/facebook/rocksdb/issues/10049)
Reviewed By: ajkr
Differential Revision: D38357922
Pulled By: pdillinger
fbshipit-source-id: d42079cadbedf0a969f03389bf586b3b4e1f9137
Summary:
During compaction, blobs are currently read using the default
`ReadOptions`, which has the `fill_cache` flag set to true. Earlier,
this didn't make any difference since we didn't have a blob cache;
however, now we have to explicitly set this flag to false to avoid
polluting the cache during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10457
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38333528
Pulled By: ltamasi
fbshipit-source-id: 5b4d49a1e39543bee73c7df2aa9194fb101875e2
Summary:
FileMetaData::[min|max]_timestamp are not currently being used or
tracked by RocksDB, even when user-defined timestamp is enabled. Each of
them is a std::string which can occupy 32 bytes. Remove them for now.
They may be added back when we have a pressing need for them. When we do
add them back, consider store them in a more compact way, e.g. one
boolean flag and a byte array of size 16.
Per file min/max timestamp bounds are available as table properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D38292275
Pulled By: riversand963
fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94
Summary:
EnvLogger was built to replace PosixLogger that supports multiple Envs. Make FileSystem use EnvLogger by default, remove Posix FS specific implementation and remove PosixLogger code,
Some hacky changes are made to make sure iostats are not polluted by logging, in order to pass existing unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10436
Test Plan: Run db_bench and watch info log files.
Reviewed By: anand1976
Differential Revision: D38259855
fbshipit-source-id: 67d65874bfba7a33535b6d0dd0ed92cbbc9888b8
Summary:
The subcompaction logic currently picks file boundaries as subcompaction boundaries. This is not compatible with user-defined timestamps because of two issues.
Issue1: ReadOptions.iterate_lower_bound and ReadOptions.iterate_upper_bound contains timestamps which results in assertion failure as BlockBasedTableIterator expects bounds to be without timestamps. As result, because of wrong comparison end key is returned as user_key resulting in assertion failure.
Issue2: Since it might result in two keys that only differ by user timestamp getting processed by two different subcompactions (and thus two different CompactionIterator state machines), which in turn can cause data correction issues.
This PR provide support to reenable subcompactions with user-defined timestamps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10344
Test Plan:
Added new unit test
- Without fix for Issue1 unit test MultipleSubCompactions fails with error:
```
db_with_timestamp_compaction_test: ./db/compaction/clipping_iterator.h:247: void rocksdb::ClippingIterat│
or::AssertBounds(): Assertion `!valid_ || !end_ || cmp_->Compare(key(), *end_) < 0' failed.
Received signal 6 (Aborted) │
#0 /usr/local/fbcode/platform009/lib/libc.so.6(gsignal+0x100) [0x7f8fbbbfe530] db_with_timestamp_compaction_test: ./db/compaction/clipping_iterator.h:247: void rocksdb::ClippingIterator::AssertBounds(): Assertion `!valid_ || !end_ || cmp_->Compare(key(), *end_) < 0' failed.
Aborted (core dumped)
```
Ran stress test
`make crash_test_with_ts -j32`
Reviewed By: riversand963
Differential Revision: D38220841
Pulled By: akankshamahajan15
fbshipit-source-id: 5d5cae2bd37fcaeba1e77fce0a69070ad4158ccb
Summary:
This PR changes the default value of
`CompactRangeOptions::exclusive_manual_compaction` from true to false so
manual `CompactRange()`s can run in parallel with other compactions. I
believe no artificial parallelism restriction is the intuitive behavior
so feel the old default value is a trap, which I have fallen into
several times, including yesterday.
`CompactRangeOptions::exclusive_manual_compaction == false` has been
used in both our correctness test and in production for years so should
be reasonably safe.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10317
Reviewed By: jay-zhuang
Differential Revision: D37659392
Pulled By: ajkr
fbshipit-source-id: 504915e978bbe300b79483d064070c75e93d91e5
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309
Reviewed By: ltamasi
Differential Revision: D38211655
Pulled By: gangliao
fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5
Summary:
If WAL compression is enabled, WAL fragment decompression results are concatenated together in `log::Reader::ReadPhysicalRecord()`. This PR adds checksum handshake to protect memory corruption during the copying process.
`checksum` is renamed to `record_checksum` in `ReadRecord()` to differentiate it from `checksum_` flag that specifies whether CRC32C checksum is verified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10339
Test Plan: added checksum verification in log_test.cc, `make check -j32`.
Reviewed By: ajkr
Differential Revision: D37763734
Pulled By: cbi42
fbshipit-source-id: c4faa7c76b9ff1df35026edf31adfe4b47ae3154
Summary:
In hash linked list, with a bucket of only one record, following sequence can cause users to temporarily miss a record:
Thread 1: Fetch the structure bucket x points too, which would be a Node n1 for a key, with next pointer to be null
Thread 2: Insert a key to bucket x that is larger than the existing key. This will make n1->next points to a new node n2, and update bucket x to point to n1.
Thread 1: see n1->next is not null, so it thinks it is a header of linked list and ignore the key of n1.
Fix it by refetch structure that bucket x points to when it sees n1->next is not null. This should work because if n1->next is not null, bucket x should already point to a linked list or skip list header.
A related change is to revert th order of testing for linked list and skip list. This is because after refetching the bucket, it might end up with a skip list, rather than linked list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10401
Test Plan: Run existing tests and make sure at least it doesn't regress.
Reviewed By: jay-zhuang
Differential Revision: D38064471
fbshipit-source-id: 142bb85e1546c803f47e3357aef3e76debccd8df
Summary:
Unit tests still haven't been fixed. Also need to add more tests. But I ran some simple fillrandom db_bench and the partitioning feels reasonable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10393
Test Plan:
1. Make sure existing tests pass. This should cover some basic sub compaction logic to be correct and the partitioning result is reasonable;
2. Add a new unit test to ApproximateKeyAnchors()
3. Run some db_bench with max_subcompaction = 4 and watch the compaction is indeed partitioned evenly.
Reviewed By: jay-zhuang
Differential Revision: D38043783
fbshipit-source-id: 085008e0f85f9b7c5abff7800307618320efb19f
Summary:
## Problem Summary
RocksDB will acquire the global mutex of db instance for every time when user calls `Write`. When RocksDB schedules a lot of compaction jobs, it will compete the mutex with write thread and it will hurt the write performance.
## Problem Solution:
I want to use log_write_mutex to replace the global mutex in most case so that we do not acquire it in write-thread unless there is a write-stall event or a write-buffer-full event occur.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7516
Test Plan:
1. make check
2. CI
3. COMPILE_WITH_TSAN=1 make db_stress
make crash_test
make crash_test_with_multiops_wp_txn
make crash_test_with_multiops_wc_txn
make crash_test_with_atomic_flush
Reviewed By: siying
Differential Revision: D36908702
Pulled By: riversand963
fbshipit-source-id: 59b13881f4f5c0a58fd3ca79128a396d9cd98efe
Summary:
Made locking strict for all accesses of `GenericRateLimiter` internal state.
`SetBytesPerSecond()` was the main problem since it had no locking, while the two updates it makes need to be done as one atomic operation.
The test case, "ConfigOptionsTest.ConfiguringOptionsDoesNotRevertRateLimiterBandwidth", is for the issue fixed in https://github.com/facebook/rocksdb/issues/10378, but I forgot to include the test there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10374
Reviewed By: pdillinger
Differential Revision: D37906367
Pulled By: ajkr
fbshipit-source-id: ccde620d2a7f96d1401bdafd2bdb685cbefbafa5
Summary:
To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321
Reviewed By: ltamasi
Differential Revision: D37913590
Pulled By: gangliao
fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72
Summary:
(PR created for informational/testing purposes only.)
- Fixes lost dynamic updates to GenericRateLimiter bandwidth using `SetBytesPerSecond()`
- Benefit over #10374 is eliminating race conditions with Configurable framework.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10378
Reviewed By: pdillinger
Differential Revision: D37914865
fbshipit-source-id: d4f566d60ec9726d26932388c61671adf0ee0f30
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298
Reviewed By: ltamasi
Differential Revision: D37908743
Pulled By: gangliao
fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
Summary:
RocksDB supports a two-level cache hierarchy (see https://rocksdb.org/blog/2021/05/27/rocksdb-secondary-cache.html), where items evicted from the primary cache can be spilled over to the secondary cache, or items from the secondary cache can be promoted to the primary one. We have a CacheLib-based non-volatile secondary cache implementation that can be used to improve read latencies and reduce the amount of network bandwidth when using distributed file systems. In addition, we have recently implemented a compressed secondary cache that can be used as a replacement for the OS page cache when e.g. direct I/O is used. The goals of this task are to add support for using a secondary cache with the blob cache and to measure the potential performance gains using `db_bench`.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10349
Reviewed By: ltamasi
Differential Revision: D37896773
Pulled By: gangliao
fbshipit-source-id: 7804619ce4a44b73d9e11ad606640f9385969c84
Summary:
Which will be used for tiered storage to preclude hot data from
compacting to the cold tier (the last level).
Internally, adding seqno to time mapping. A periodic_task is scheduled
to record the current_seqno -> current_time in certain cadence. When
memtable flush, the mapping informaiton is stored in sstable property.
During compaction, the mapping information are merged and get the
approximate time of sequence number, which is used to determine if a key
is recently inserted or not and preclude it from the last level if it's
recently inserted (within the `preclude_last_level_data_seconds`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338
Test Plan: CI
Reviewed By: siying
Differential Revision: D37810187
Pulled By: jay-zhuang
fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f
Summary:
Some items are misplaced to 7.4 but they are unreleased.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10362
Reviewed By: jay-zhuang
Differential Revision: D37859426
fbshipit-source-id: e2ad099227309ed2e0f3ca450a9a43986d681c7c
Summary:
InternalKeyComparator is an internal class which is a simple wrapper of Comparator. https://github.com/facebook/rocksdb/pull/8336 made Comparator customizeable. As a side effect, internal key comparator was made configurable too. This introduces overhead to this simple wrapper. For example, every InternalKeyComparator will have an std::vector attached to it, which consumes memory and possible allocation overhead too.
We remove InternalKeyComparator from being customizable by making InternalKeyComparator not a subclass of Comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10342
Test Plan: Run existing CI tests and make sure it doesn't fail
Reviewed By: riversand963
Differential Revision: D37771351
fbshipit-source-id: 917256ee04b2796ed82974549c734fb6c4d8ccee
Summary:
Enabled zstd checksum flag in StreamingCompress so that WAL (de)compreression is protected by a checksum per compression frame.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10319
Test Plan:
- `make check`
- WAL perf: average ops/sec over 10 runs is 161226 pre PR and 159635 post PR (1% drop).
```
sudo TEST_TMPDIR=/dev/shm/memtable_write ./db_bench_checksum -benchmarks=fillseq -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=10 -wal_compression=zstd
```
Reviewed By: ajkr
Differential Revision: D37673311
Pulled By: cbi42
fbshipit-source-id: 9f34a3bfc2a82e5c80b1ec63bb339a7465108ec9
Summary:
ClockCache is still in experimental stage, and currently fails some pre-release fbcode tests. See https://www.internalfb.com/diff/D37772011. API calls to construct ClockCache are done via the function NewClockCache. For now, NewClockCache calls will return an LRUCache (with appropriate arguments), which is stable.
The idea that NewClockCache returns nullptr was also floated, but this would be interpreted as unsupported cache, and a default LRUCache would be constructed instead, potentially causing a performance regression that is harder to identify.
A new version of the NewClockCache function was created for our internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10351
Test Plan: ``make -j24 check`` and re-run the pre-release tests.
Reviewed By: pdillinger
Differential Revision: D37802685
Pulled By: guidotag
fbshipit-source-id: 0a8d10612ff21e576f7360cb13e20bc36e244972
Summary:
Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278
Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions.
Reviewed By: hx235
Differential Revision: D37640946
Pulled By: littlepig2013
fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added): 57adbf0e91/table/get_context.cc (L397)
I audited all the existing uses of IsIncomplete and updated those that
seemed relevant.
HISTORY updated with a clear warning to users of strict_capacity_limit=true
to update uses of `IsIncomplete()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10262
Test Plan: updated unit tests
Reviewed By: hx235
Differential Revision: D37473155
Pulled By: pdillinger
fbshipit-source-id: 4bd9d9353ccddfe286b03ebd0652df8ce20f99cb
Summary:
In leveled compaction, try to trivial move more than one files if possible, up to 4 files or max_compaction_bytes. This is to allow higher write throughput for some use cases where data is loaded in sequential order, where appying compaction results is the bottleneck.
When pick up a file to compact and it doesn't have overlapping files in the next level, try to expand to the next file if there is still no overlapping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10190
Test Plan:
Add some unit tests.
For performance, Try to run
./db_bench_multi_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
Together with https://github.com/facebook/rocksdb/pull/10188 , stalling will be eliminated in this benchmark.
Reviewed By: jay-zhuang
Differential Revision: D37230647
fbshipit-source-id: 42b260f545c46abc5d90335ac2bbfcd09602b549
Summary:
If dbname and db_log_dir are at different filesystems (one
local and one remote), creation of dbname will fail because that path
doesn't exist wrt to db_log_dir.
This patch will ignore the error returned on creation of dbname. If they
are on same filesystem, db_log_dir creation will automatically return
the error in case there is any error in creation of dbname.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10292
Test Plan: Existing unit tests
Reviewed By: riversand963
Differential Revision: D37567773
Pulled By: akankshamahajan15
fbshipit-source-id: 005d28c536208d4c126c8cb8e196d1d85b881100
Summary:
In leveled compaction, L0->L1 trivial move will allow more than one file to be moved in one compaction. This would allow L0 files to be moved down faster when data is loaded in sequential order, making slowdown or stop condition harder to hit. Also seek L0->L1 trivial move when only some files qualify.
1. We always try to find L0->L1 trivial move from the oldest files. Keep including newer files, until adding a new file won't trigger a trivial move
2. Modify the trivial move condition so that this compaction would be tagged as trivial move.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10188
Test Plan:
See throughput improvements with db_bench with fast fillseq benchmark and small L0 files:
./db_bench_l0_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
The throughput improved by about 50%. Stalling still happens though.
Reviewed By: jay-zhuang
Differential Revision: D37224743
fbshipit-source-id: 8958d97f22e12bdfc14d2e85930f6fa0070e9659
Summary:
The current level targets for dynamical leveling has a problem: the target level size will dramatically change after a L0->L1 compaction. When there are many L0 bytes, lower level compactions are delayed, but they will be resumed after the L0->L1 compaction finishes, so the expected write amplification benefits might not be realized. The proposal here is to revert the level targetting size, but instead relying on adjusting score for each level to prioritize levels that need to compact most.
Basic idea:
(1) target level size isn't adjusted, but score is adjusted. The reasoning is that with parallel compactions, holding compactions from happening might not be desirable, but we would like the compactions are scheduled from the level we feel most needed. For example, if we have a extra-large L2, we would like all compactions are scheduled for L2->L3 compactions, rather than L4->L5. This gets complicated when a large L0->L1 compaction is going on. Should we compact L2->L3 or L4->L5. So the proposal for that is:
(2) the score is calculated by actual level size / (target size + estimated upper bytes coming down). The reasoning is that if we have a large amount of pending L0/L1 bytes coming down, compacting L2->L3 might be more expensive, as when the L0 bytes are compacted down to L2, the actual L2->L3 fanout would change dramatically. On the other hand, when the amount of bytes coming down to L5, the impacts to L5->L6 fanout are much less. So when calculating target score, we can adjust it by adding estimated downward bytes to the target level size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10057
Test Plan: Repurpose tests VersionStorageInfoTest.MaxBytesForLevelDynamicWithLargeL0_* tests to cover this scenario.
Reviewed By: ajkr
Differential Revision: D37539742
fbshipit-source-id: 9c154cbfe92023f918cf5d80875d8776ad4831a4
Summary:
Currently, when installing a new super version, when stalling condition triggers, we compare estimated compaction bytes to previously, and if the new value is larger or equal to the previous one, we reduce the slowdown write rate. However, if concurrent compactions happen, the same value might be used. The result is that, although some compactions reduce estimated compaction bytes, we treat them as a signal for further slowing down. In some cases, it causes slowdown rate drops all the way to the minimum, far lower than needed.
Fix the bug by not triggering a re-calculation if a new super version doesn't have Version or a memtable change. With this fix, number of compaction finishes are still undercounted in this algorithm, but it is still better than the current bug where they are negatively counted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10270
Test Plan: Run a benchmark where the slowdown rate is dropped to minimal unnessarily and see it is back to a normal value.
Reviewed By: ajkr
Differential Revision: D37497327
fbshipit-source-id: 9bca961cc38fed965c3af0fa6c9ca0efaa7637c4
Summary:
Resolves https://github.com/facebook/rocksdb/issues/9761
With this PR, applications can create an iterator with the following
```cpp
ReadOptions read_opts;
read_opts.timestamp = &ts_ub;
read_opts.iter_start_ts = &ts_lb;
auto* it = db->NewIterator(read_opts);
it->SeekToLast();
// or it->SeekForPrev("foo");
it->Prev();
...
```
The application can access different versions of the same user key via `key()`, `value()`, and `timestamp()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10200
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37258074
Pulled By: riversand963
fbshipit-source-id: 3f0b866ade50dcff7ef60d506397a9dd6ec91565
Summary:
Currently SortFileByOverlappingRatio() is O(nlogn). It is usually OK but When there are a lot of files in an LSM-tree, SortFileByOverlappingRatio() can take non-trivial amount of time. The problem is severe when the user is loading keys in sorted order, where compaction is only trivial move and this operation becomes the bottleneck and limit the total throughput. This commit makes SortFileByOverlappingRatio() only find the top 50 files based on score. 50 files are usually enough for the parallel compactions needed for the level, and in case it is not enough, we would fall back to random, which should be acceptable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10161
Test Plan:
Run a fillseq that generates a lot of files, and observe throughput improved (although stall is not yet eliminated). The command ran:
TEST_TMPDIR=/dev/shm/ ./db_bench_sort --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000
The throughput improved by 11%.
Reviewed By: jay-zhuang
Differential Revision: D37129469
fbshipit-source-id: 492da2ef5bfc7cdd6daa3986b50d2ff91f88542d
Summary:
Resolves https://github.com/facebook/rocksdb/issues/10129
I extracted this fix from https://github.com/facebook/rocksdb/issues/7516 since it's also already a bug in main branch, and we want to
separate it from the main part of the PR.
There can be a race condition between two threads. Thread 1 executes
`DBImpl::FindObsoleteFiles()` while thread 2 executes `GetSortedWals()`.
```
Time thread 1 thread 2
| mutex_.lock
| read disable_delete_obsolete_files_
| ...
| wait on log_sync_cv and release mutex_
| mutex_.lock
| ++disable_delete_obsolete_files_
| mutex_.unlock
| mutex_.lock
| while (pending_purge_obsolete_files > 0) { bg_cv.wait;}
| wake up with mutex_ locked
| compute WALs tracked by MANIFEST
| mutex_.unlock
| wake up with mutex_ locked
| ++pending_purge_obsolete_files_
| mutex_.unlock
|
| delete obsolete WAL
| WAL missing but tracked in MANIFEST.
V
```
The fix proposed eliminates the possibility of the above by increasing
`pending_purge_obsolete_files_` before `FindObsoleteFiles()` can possibly release the mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10187
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37214235
Pulled By: riversand963
fbshipit-source-id: 556ab1b58ae6d19150169dfac4db08195c797184
Summary:
Add suggest_compact_range() and suggest_compact_range_cf() to C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10175
Test Plan:
As verifying the result requires SyncPoint, which is not available in the c_test.c,
the test is currently done by invoking the functions and making sure it does not crash.
Reviewed By: jay-zhuang
Differential Revision: D37305191
Pulled By: ajkr
fbshipit-source-id: 0fe257b45914f6c9aeb985d8b1820dafc57a20db
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
* Add metadata related structs and functions in C API, including
- `rocksdb_get_column_family_metadata()` and `rocksdb_get_column_family_metadata_cf()`
that returns `rocksdb_column_family_metadata_t`.
- `rocksdb_column_family_metadata_t` and its get functions & destroy function.
- `rocksdb_level_metadata_t` and its and its get functions & destroy function.
- `rocksdb_file_metadata_t` and its and get functions & destroy functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10207
Test Plan:
Extend the existing c_test.c to include additional checks for column_family_metadata
inside CheckCompaction.
Reviewed By: riversand963
Differential Revision: D37305209
Pulled By: ajkr
fbshipit-source-id: 0a5183206353acde145f5f9b632c3bace670aa6e
Summary:
There was a bug in the MultiGet enhancement in https://github.com/facebook/rocksdb/issues/9899 with data
block hash index, which was not caught because data block hash index was
never added to stress tests. This change fixes both issues.
Fixes https://github.com/facebook/rocksdb/issues/10186
I intend to pick this into the 7.4.0 release candidate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10220
Test Plan:
Failure quickly reproduces in crash test with
kDataBlockBinaryAndHash, and does not seem to with the fix. Reproducing
the failure with a unit test I believe would be too tricky and fragile
to be worthwhile.
Reviewed By: anand1976
Differential Revision: D37315647
Pulled By: pdillinger
fbshipit-source-id: 9f648265bba867275edc752f7a56611a59401cba
Summary:
This bug was discovered after write batch checksum verification before WAL is added (https://github.com/facebook/rocksdb/issues/10114) and stress test with write batch checksum protection is turned on (https://github.com/facebook/rocksdb/issues/10037). In this [line](d5d8920f2c/db/write_batch.cc (L2887)), the number of checksums may not be consistent with `batch->Count()`. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10201
Test Plan:
```
./db_stress --batch_protection_bytes_per_key=8 --destroy_db_initially=1 --max_key=100000 --use_txn=1
```
Reviewed By: ajkr
Differential Revision: D37260799
Pulled By: cbi42
fbshipit-source-id: ff8dce7dcce295d689333bc9d892d17a843bf0ea
Summary:
`FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced.
The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`.
An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB.
```
Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185
Test Plan:
- repro unit test
- the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list"
Reviewed By: riversand963
Differential Revision: D37200993
Pulled By: ajkr
fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
folly DistributedMutex is faster than standard mutexes though
imposes some static obligations on usage. See
https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h
for details. Here we use this alternative for our Cache implementations
(especially LRUCache) for better locking performance, when RocksDB is
compiled with folly.
Also added information about which distributed mutex implementation is
being used to cache_bench output and to DB LOG.
Intended follow-up:
* Use DMutex in more places, perhaps improving API to support non-scoped
locking
* Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently)
Credit: Thanks Siying for reminding me about this line of work that was previously
left unfinished.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179
Test Plan:
for correctness, existing tests. CircleCI config updated.
Also Meta-internal buck build updated.
For performance, ran simultaneous before & after cache_bench. Out of three
comparison runs, the middle improvement to ops/sec was +21%:
Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode
compiler)
```
Complete in 20.201 s; Rough parallel ops/sec = 1584062
Thread ops/sec = 107176
Operation latency (ns):
Count: 32000000 Average: 9257.9421 StdDev: 122412.04
Min: 134 Median: 3623.0493 Max: 56918500
Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63
```
New: (add USE_FOLLY=1)
```
Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%)
Thread ops/sec = 135487
Operation latency (ns):
Count: 32000000 Average: 7304.9294 StdDev: 108530.28
Min: 132 Median: 3777.6012 Max: 91030902
Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83
```
Reviewed By: anand1976
Differential Revision: D37182983
Pulled By: pdillinger
fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1
Summary:
Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`.
Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user.
There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037
Test Plan:
- Manual
- Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24`
- Enabled in MyShadow for 1+ week
- Automated
- Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions`
- Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection
Reviewed By: cbi42
Differential Revision: D36614569
Pulled By: ajkr
fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb
Summary:
In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using
the public API, because of its inefficiency. Although we normally maintain read compatibility
on old DBs forever, filters are not required for reading a DB, only for optimizing read
performance. Thus, it should be acceptable to remove this code and the substantial
maintenance burden it carries as useful features are developed and validated (such
as user timestamp).
This change completely removes the code for reading and writing the old block-based
filters, net removing about 1370 lines of code no longer needed. Options removed from
testing / benchmarking tools. The prior existence is only evident in a couple of places:
* `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in
a major release to minimize source code incompatibilities.
* A warning is logged when an old table file is opened that used the old block-based
filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing
should suffice. Unfortunately, sst_dump does not tell you whether a file uses
block-based filter, and the structure of the code makes it very difficult to fix.
* To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`)
for metaindex is maintained (for now).
Other notes:
* In some cases where numbers are associated with filter configurations, we have had to
update the assigned numbers so that they all correspond to something that exists.
* Fixed potential stat counting bug by assuming `filter_checked = false` for cases
like `filter == nullptr` rather than assuming `filter_checked = true`
* Removed obsolete `block_offset` and `prefix_extractor` parameters from several
functions.
* Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)`
because the caller guarantees the prefix extractor exists and is compatible
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184
Test Plan:
tests updated, manually test new warning in LOG using base version to
generate a DB
Reviewed By: riversand963
Differential Revision: D37212647
Pulled By: pdillinger
fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
Summary:
Add a couple of stats to help users estimate the impact of potential MultiGet perf improvements -
1. NUM_LEVEL_READ_PER_MULTIGET - A histogram stat for number of levels that required MultiGet to read from a file
2. MULTIGET_COROUTINE_COUNT - A ticker stat to count the number of times the coroutine version of MultiGetFromSST was used
The NUM_DATA_BLOCKS_READ_PER_LEVEL stat is obsoleted as it doesn't provide useful information for MultiGet optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10182
Reviewed By: akankshamahajan15
Differential Revision: D37213296
Pulled By: anand1976
fbshipit-source-id: 5d2b7708017c0e278578ae4bffac3926f6530efb
Summary:
A consequence of https://github.com/facebook/rocksdb/issues/9990 was requiring a non-empty DB ID to generate
new SST files. But if the DB ID is not tracked in the manifest and the IDENTITY file
is somehow truncated to 0 bytes, then an empty DB ID would be assigned, leading
to crash. This change ensures a non-empty DB ID is assigned and set in the
IDENTITY file.
Also,
* Some light refactoring to clean up the logic
* (I/O efficiency) If the ID is tracked in the manifest and already matches the
IDENTITY file, don't needlessly overwrite the file.
* (Debugging) Log the DB ID to info log on open, because sometimes IDENTITY
can change if DB is moved around (though it would be unusual for info log to
be copied/moved without IDENTITY file)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10173
Test Plan: unit tests expanded/updated
Reviewed By: ajkr
Differential Revision: D37176545
Pulled By: pdillinger
fbshipit-source-id: a9b414cd35bfa33de48af322a36c24538d50bef1
Summary:
Implement AbortIO in posix using io_uring to cancel any pending read requests submitted. Its cancelled using io_uring_prep_cancel which sets the IORING_OP_ASYNC_CANCEL flag.
To cancel a request, the sqe must have ->addr set to the user_data of the request it wishes to cancel. If the request is cancelled successfully, the original request is completed with -ECANCELED and the cancel request is completed with a result of 0. If the request was already running, the original may or may not complete in error. The cancel request will complete with -EALREADY for that case. And finally, if the request to cancel wasn't found, the cancel request is completed with -ENOENT.
Reference: https://kernel.dk/io_uring-whatsnew.pdf,
https://lore.kernel.org/io-uring/d9a8d76d23690842f666c326631ecc2d85b6c1bc.1615566409.git.asml.silence@gmail.com/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10125
Test Plan: Existing Posix tests.
Reviewed By: anand1976
Differential Revision: D36946970
Pulled By: akankshamahajan15
fbshipit-source-id: 3bc1f1521b3151d01a348fc6431eb3fc85db3a14
Summary:
auto_prefix_mode is designed to use prefix filtering in a
particular "safe" set of cases where the upper bound and the seek key
have different prefixes: where the upper bound is the "same length
immediate successor". These conditions are not sufficient to guarantee
the same iteration results as total_order_seek if the DB contains
"short" keys, less than the "full" (maximum) prefix length.
We are not simply disabling the optimization in these successor cases
because it is likely that users are essentially getting what they want
out of existing usage. Especially if users are constructing successor
bounds with the intention of doing a prefix-bounded seek, the existing
behavior is more expected than the total_order_seek behavior.
Consequently, for now we reconcile the bad specification of behavior by
documenting the existing mismatch with total_order_seek.
A closely related issue affects hypothetical comparators like
ReverseBytewiseComparator: if they "correctly" implement
IsSameLengthImmediateSuccessor, auto_prefix_mode could omit more
entries (other than "short" keys noted above). Luckily, the built-in
ReverseBytewiseComparator has an "incorrect" implementation of
IsSameLengthImmediateSuccessor that effectively prevents prefix
optimization and, thus, the bug. This is now documented as a new
constraint on IsSameLengthImmediateSuccessor, and the implementation
tweaked to be simply "safe" rather than "incorrect".
This change also includes unit test updates to demonstrate the above
issues. (Test was cleaned up for readability and simplicity.)
Intended follow-up:
* Tweak documented axioms for prefix_extractor (more details then)
* Consider some sort of fix for this case. I don't know what that would
look like without breaking the performance of existing code. Perhaps
if all keys in an SST file have prefixes that are "full length," we can track
that fact and use it to allow optimization with the "same length
immediate successor", but that would only apply to new files.
* Consider a better system of specifying prefix bounds
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10144
Test Plan: test updates included
Reviewed By: siying
Differential Revision: D37052710
Pulled By: pdillinger
fbshipit-source-id: 5f63b7d65f3f214e4b143e0f9aa1749527c587db
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
When opening an SST file created using index_type=kHashSearch,
the *current* prefix_extractor would be saved, and used with hash index
if the *new current* prefix_extractor at query time is compatible with
the SST file. This is a problem if the prefix_extractor at SST open time
is not compatible but SetOptions later changes (back) to one that is
compatible.
This change fixes that by using the known compatible (or missing) prefix
extractor we save for use with prefix filtering. Detail: I have moved the
InternalKeySliceTransform wrapper to avoid some indirection and remove
unnecessary fields.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10128
Test Plan:
expanded unit test (using some logic from https://github.com/facebook/rocksdb/issues/10122) that fails
before fix and probably covers some other previously uncovered cases.
Reviewed By: siying
Differential Revision: D36955738
Pulled By: pdillinger
fbshipit-source-id: 0c78a6b0d24054ef2f3cb237bf010c1c5589fb10
Summary:
RocksDB uses WalManager to manage WAL files. In WalManager::ReadFirstLine(), the assumption is that reading the first record of a valid WAL file will return OK status and set the output sequence to non-zero value.
This assumption has been broken by WAL compression which writes a `kSetCompressionType` record which is not associated with any sequence number.
Consequently, WalManager::GetSortedWalsOfType() will skip these WALs and not return them to caller, e.g. Checkpoint, Backup, causing the operations to fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10130
Test Plan: - Newly Added test
Reviewed By: riversand963
Differential Revision: D36985744
Pulled By: akankshamahajan15
fbshipit-source-id: dfde7b3be68b6a30b75b49479779748eedf29f7f
Summary:
Closing https://github.com/facebook/rocksdb/issues/10080
When `SyncWAL()` calls `MarkLogsSynced()`, even if there is only one active WAL file,
this event should still be added to the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10087
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36797580
Pulled By: riversand963
fbshipit-source-id: 24184c9dd606b3939a454ed41de6e868d1519999
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.
In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077
Reviewed By: ltamasi
Differential Revision: D36884156
Pulled By: gangliao
fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
Summary:
Garbage collection is generally controlled by the BlobDB configuration options `enable_blob_garbage_collection` and `blob_garbage_collection_age_cutoff`. However, there might be use cases where we would want to temporarily override these options while performing a manual compaction. (One use case would be doing a full key-space manual compaction with full=100% garbage collection age cutoff in order to minimize the space occupied by the database.) Our goal here is to make it possible to override the configured GC parameters when using the `CompactRange` API to perform manual compactions. This PR would involve:
- Extending the `CompactRangeOptions` structure so clients can both force-enable and force-disable GC, as well as use a different cutoff than what's currently configured
- Storing whether blob GC should actually be enabled during a certain manual compaction and the cutoff to use in the `Compaction` object (considering the above overrides) and passing it to `CompactionIterator` via `CompactionProxy`
- Updating the BlobDB wiki to document the new options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10073
Test Plan: Adding unit tests and adding the new options to the stress test tool.
Reviewed By: ltamasi
Differential Revision: D36848700
Pulled By: gangliao
fbshipit-source-id: c878ef101d1c612429999f513453c319f75d78e9
Summary:
`db_impl.alive_log_files_` is used to track the WAL size in `db_impl.logs_`.
Get the `LogFileNumberSize` obj in `alive_log_files_` the same time as `log_writer` to keep them consistent.
For this issue, it's not safe to do `deque::reverse_iterator::operator*` and `deque::pop_front()` concurrently,
so remove the tail cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10086
Test Plan:
```
# on Windows
gtest-parallel ./db_test --gtest_filter=DBTest.FileCreationRandomFailure -r 1000 -w 100
```
Reviewed By: riversand963
Differential Revision: D36822373
Pulled By: jay-zhuang
fbshipit-source-id: 5e738051dfc7bcf6a15d85ba25e6365df6b6a6af
Summary:
We recently saw a case in crash test in which a WAL file in the
middle of the list of live WALs was not included in the backup, so the
DB was not openable due to missing WAL. We are not sure why, but this
change should at least turn that into a backup-time failure by ensuring
all the WAL files expected by the manifest (according to VersionSet) are
included in `GetSortedWalFiles()` (used by `GetLiveFilesStorageInfo()`,
`BackupEngine`, and `Checkpoint`)
Related: to maximize the effectiveness of
track_and_verify_wals_in_manifest with GetSortedWalFiles() during
checkpoint/backup, we will now sync WAL in GetLiveFilesStorageInfo()
when track_and_verify_wals_in_manifest=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10083
Test Plan: added new unit test for the check in GetSortedWalFiles()
Reviewed By: ajkr
Differential Revision: D36791608
Pulled By: pdillinger
fbshipit-source-id: a27bcf0213fc7ab177760fede50d4375d579afa6
Summary:
For regular db instance and secondary instance, we return error and refuse to open DB if Logger creation fails.
Our current code allows it, but it is really difficult to debug because
there will be no LOG files. The same for OPTIONS file, which will be explored in another PR.
Furthermore, Arena::AllocateAligned(size_t bytes, size_t huge_page_size, Logger* logger) has an
assertion as the following:
```cpp
#ifdef MAP_HUGETLB
if (huge_page_size > 0 && bytes > 0) {
assert(logger != nullptr);
}
#endif
```
It can be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9984
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D36347754
Pulled By: riversand963
fbshipit-source-id: 529798c0511d2eaa2f0fd40cf7e61c4cbc6bc57e
Summary:
Right now, in FindObsoleteFiles() we build a list of all live SST files from all existing Versions. This is all done in DB mutex, and is O(m*n) where m is number of versions and n is number of files. In some extereme cases, it can take very long. The list is used to see whether a candidate file still shows up in a version. With this commit, every candidate file is directly check against all the versions for file existance. This operation would be O(m*k) where k is number of candidate files. Since is usually small (except perhaps full compaction in universal compaction), this is usually much faster than the previous solution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10040
Test Plan: TBD
Reviewed By: riversand963
Differential Revision: D36613391
fbshipit-source-id: 3f13b090f755d9b3ae417faec62cd6e798bac1eb
Summary:
This PR wants to improve support for transaction in C-API:
* Support two-phase commit.
* Support `get_pinned` and `multi_get` in transaction.
* Add `rocksdb_transactiondb_flush`
* Support get writebatch from transaction and rebuild transaction from writebatch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9252
Reviewed By: jay-zhuang
Differential Revision: D36459007
Pulled By: riversand963
fbshipit-source-id: 47371d527be821c496353a7fe2fd18d628069a98
Summary:
In LRU Cache mutex, we sometimes call malloc_usable_size() to calculate memory used by the metadata object. We prevent it by saving the charge + metadata size, rather than charge, inside the metadata itself. Within the mutex, usually only total charge is needed so we don't need to repeat.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10026
Test Plan: Run existing tests.
Reviewed By: pdillinger
Differential Revision: D36556253
fbshipit-source-id: f60c96d13cde3af77732e5548e4eac4182fa9801
Summary:
This PR is the second and last part for adding user defined timestamp support to read only DB. Specifically, the change in this PR includes:
- `options.timestamp` respected by `CompactedDBImpl::Get` and `CompactedDBImpl::MultiGet` to return results visible up till that timestamp.
- `CompactedDBImpl::Get(...,std::string* timestsamp)` and `CompactedDBImpl::MultiGet(std::vector<std::string>* timestamps)` return the timestamp(s) associated with the key(s).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10030
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_readonly_with_timestamp_test --gtest_filter="DBReadOnlyTestWithTimestamp.CompactedDB*"
$./db_basic_test --gtest_filter="DBBasicTest.CompactedDB*"
$make all check
```
Reviewed By: riversand963
Differential Revision: D36613926
Pulled By: jowlyzhang
fbshipit-source-id: 5b7ed7fef822708c12e2caf7a8d2deb6a696f0f0
Summary:
RocksDB snapshot already has a member unix_time_ set after
snapshot is taken. It is now exposed through GetSnapshotTime() API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9923
Test Plan: Update unit tests
Reviewed By: riversand963
Differential Revision: D36048275
Pulled By: akankshamahajan15
fbshipit-source-id: 825210ec287deb0bc3aaa9b8e1f079f07ad686fa
Summary:
The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index).
This flow can be parallelized.
Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap.
- Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted.
- If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass.
- If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994
Test Plan:
- **Run Regressions.**
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
i) Previous release 7.0 run for normal prefetching with async_io disabled:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Set seed to 1652922591315307 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:09:51 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found)
```
iii) db_bench with async_io enabled completed succesfully
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
Set seed to 1652924062021732 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:34:22 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found)
```
- db_stress with async_io disabled completed succesfully
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it.
Reviewed By: anand1976
Differential Revision: D36459323
Pulled By: akankshamahajan15
fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c
Summary:
This PR implements a coroutine version of batched MultiGet in order to concurrently read from multiple SST files in a level using async IO, thus reducing the latency of the MultiGet. The API from the user perspective is still synchronous and single threaded, with the RocksDB part of the processing happening in the context of the caller's thread. In Version::MultiGet, the decision is made whether to call synchronous or coroutine code.
A good way to review this PR is to review the first 4 commits in order - de773b3, 70c2f70, 10b50e1, and 377a597 - before reviewing the rest.
TODO:
1. Figure out how to build it in CircleCI (requires some dependencies to be installed)
2. Do some stress testing with coroutines enabled
No regression in synchronous MultiGet between this branch and main -
```
./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,multireadrandom" -key_size=32 -value_size=512 -num=5000000 -batch_size=64 -multiread_batched=true -use_direct_reads=false -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=true -threads=16 -cache_size=10485760000 -async_io=false -multiread_stride=40000 -statistics
```
Branch - ```multireadrandom : 4.025 micros/op 3975111 ops/sec 60.001 seconds 238509056 operations; 2062.3 MB/s (14767808 of 14767808 found)```
Main - ```multireadrandom : 3.987 micros/op 4013216 ops/sec 60.001 seconds 240795392 operations; 2082.1 MB/s (15231040 of 15231040 found)```
More benchmarks in various scenarios are given below. The measurements were taken with ```async_io=false``` (no coroutines) and ```async_io=true``` (use coroutines). For an IO bound workload (with every key requiring an IO), the coroutines version shows a clear benefit, being ~2.6X faster. For CPU bound workloads, the coroutines version has ~6-15% higher CPU utilization, depending on how many keys overlap an SST file.
1. Single thread IO bound workload on remote storage with sparse MultiGet batch keys (~1 key overlap/file) -
No coroutines - ```multireadrandom : 831.774 micros/op 1202 ops/sec 60.001 seconds 72136 operations; 0.6 MB/s (72136 of 72136 found)```
Using coroutines - ```multireadrandom : 318.742 micros/op 3137 ops/sec 60.003 seconds 188248 operations; 1.6 MB/s (188248 of 188248 found)```
2. Single thread CPU bound workload (all data cached) with ~1 key overlap/file -
No coroutines - ```multireadrandom : 4.127 micros/op 242322 ops/sec 60.000 seconds 14539384 operations; 125.7 MB/s (14539384 of 14539384 found)```
Using coroutines - ```multireadrandom : 4.741 micros/op 210935 ops/sec 60.000 seconds 12656176 operations; 109.4 MB/s (12656176 of 12656176 found)```
3. Single thread CPU bound workload with ~2 key overlap/file -
No coroutines - ```multireadrandom : 3.717 micros/op 269000 ops/sec 60.000 seconds 16140024 operations; 139.6 MB/s (16140024 of 16140024 found)```
Using coroutines - ```multireadrandom : 4.146 micros/op 241204 ops/sec 60.000 seconds 14472296 operations; 125.1 MB/s (14472296 of 14472296 found)```
4. CPU bound multi-threaded (16 threads) with ~4 key overlap/file -
No coroutines - ```multireadrandom : 4.534 micros/op 3528792 ops/sec 60.000 seconds 211728728 operations; 1830.7 MB/s (12737024 of 12737024 found) ```
Using coroutines - ```multireadrandom : 4.872 micros/op 3283812 ops/sec 60.000 seconds 197030096 operations; 1703.6 MB/s (12548032 of 12548032 found) ```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9968
Reviewed By: akankshamahajan15
Differential Revision: D36348563
Pulled By: anand1976
fbshipit-source-id: c0ce85a505fd26ebfbb09786cbd7f25202038696
Summary:
1. The latest change of DecideRateLimiterPriority in https://github.com/facebook/rocksdb/pull/9988 is reverted.
2. For https://github.com/facebook/rocksdb/blob/main/db/builder.cc#L345-L349
2.1. Remove `we will regrad this verification as user reads` from the comments.
2.2. `Do not set` the read_options.rate_limiter_priority to Env::IO_USER . Flush should be a background job.
2.3. Update db_rate_limiter_test.cc.
3. In IOOptions, mark `prio` as deprecated for future removal.
4. In `file_system.h`, mark `IOPriority` as deprecated for future removal.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10020
Test Plan: Unit tests.
Reviewed By: ajkr
Differential Revision: D36525317
Pulled By: gitbw95
fbshipit-source-id: 011ba421822f8a124e6d25a2661c4e242df6ad36
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
### Context:
Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users.
### Solution
User, Flush, and Compaction reads share some code path. For this task, we update the rate_limiter_priority in ReadOptions for code paths (e.g. FindTable (mainly in BlockBasedTable::Open()) and various iterators), and eventually update the rate_limiter_priority in IOOptions for FSRandomAccessFile.
**This PR is for the Read path.** The **Read:** dynamic priority for different state are listed as follows:
| State | Normal | Delayed | Stalled |
| ----- | ------ | ------- | ------- |
| Flush (verification read in BuildTable()) | IO_USER | IO_USER | IO_USER |
| Compaction | IO_LOW | IO_USER | IO_USER |
| User | User provided | User provided | User provided |
We will respect the read_options that the user provided and will not set it.
The only sst read for Flush is the verification read in BuildTable(). It claims to be "regard as user read".
**Details**
1. Set read_options.rate_limiter_priority dynamically:
- User: Do not update the read_options. Use the read_options that the user provided.
- Compaction: Update read_options in CompactionJob::ProcessKeyValueCompaction().
- Flush: Update read_options in BuildTable().
2. Pass the rate limiter priority to FSRandomAccessFile functions:
- After calling the FindTable(), read_options is passed through GetTableReader(table_cache.cc), BlockBasedTableFactory::NewTableReader(block_based_table_factory.cc), and BlockBasedTable::Open(). The Open() needs some updates for the ReadOptions variable and the updates are also needed for the called functions, including PrefetchTail(), PrepareIOOptions(), ReadFooterFromFile(), ReadMetaIndexblock(), ReadPropertiesBlock(), PrefetchIndexAndFilterBlocks(), and ReadRangeDelBlock().
- In RandomAccessFileReader, the functions to be updated include Read(), MultiRead(), ReadAsync(), and Prefetch().
- Update the downstream functions of NewIndexIterator(), NewDataBlockIterator(), and BlockBasedTableIterator().
### Test Plans
Add unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9996
Reviewed By: anand1976
Differential Revision: D36452483
Pulled By: gitbw95
fbshipit-source-id: 60978204a4f849bb9261cb78d9bc1cb56d6008cf
Summary:
### Context:
Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users.
From the RocksDB perspective, there can be two kinds of rate limiters, the internal (native) one and the external one.
- The internal (native) rate limiter is introduced in [the wiki](https://github.com/facebook/rocksdb/wiki/Rate-Limiter). Currently, only IO_LOW and IO_HIGH are used and they are set statically.
- For the external rate limiter, in FSWritableFile functions, IOOptions is open for end users to set and get rate_limiter_priority for their own rate limiter. Currently, RocksDB doesn’t pass the rate_limiter_priority through IOOptions to the file system.
### Solution
During the User Read, Flush write, Compaction read/write, the WriteController is used to determine whether DB writes are stalled or slowed down. The rate limiter priority (Env::IOPriority) can be determined accordingly. We decided to always pass the priority in IOOptions. What the file system does with it should be a contract between the user and the file system. We would like to set the rate limiter priority at file level, since the Flush/Compaction job level may be too coarse with multiple files and block IO level is too granular.
**This PR is for the Write path.** The **Write:** dynamic priority for different state are listed as follows:
| State | Normal | Delayed | Stalled |
| ----- | ------ | ------- | ------- |
| Flush | IO_HIGH | IO_USER | IO_USER |
| Compaction | IO_LOW | IO_USER | IO_USER |
Flush and Compaction writes share the same call path through BlockBaseTableWriter, WritableFileWriter, and FSWritableFile. When a new FSWritableFile object is created, its io_priority_ can be set dynamically based on the state of the WriteController. In WritableFileWriter, before the call sites of FSWritableFile functions, WritableFileWriter::DecideRateLimiterPriority() determines the rate_limiter_priority. The options (IOOptions) argument of FSWritableFile functions will be updated with the rate_limiter_priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9988
Test Plan: Add unit tests.
Reviewed By: anand1976
Differential Revision: D36395159
Pulled By: gitbw95
fbshipit-source-id: a7c82fc29759139a1a07ec46c37dbf7e753474cf
Summary:
128 bits should suffice almost always and for tracking in manifest.
Note that this changes the output of sst_dump --show_properties to only show 128 bits.
Also introduces InternalUniqueIdToHumanString for presenting internal IDs for debugging purposes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10009
Test Plan: unit tests updated
Reviewed By: jay-zhuang
Differential Revision: D36458189
Pulled By: pdillinger
fbshipit-source-id: 93ebc4a3b6f9c73ee154383a1f8b291a5d6bbef5
Summary:
**Context:**
Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`.
Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags.
**Summary:**
- Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that
- Added missing db bench/stress test for some memory charging features
- Renamed related test suite to indicate they are under the same theme of memory charging
- Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication
- Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926
Test Plan:
- New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)`
- New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)`
- CI
- db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'`
#-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721
20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465**
40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078**
- db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal
Reviewed By: ajkr
Differential Revision: D36054712
Pulled By: hx235
fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
