Summary:
This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state.
Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796
Test Plan: tests added/updated, that fail before the change(s) and now pass
Reviewed By: jay-zhuang
Differential Revision: D40232645
Pulled By: jay-zhuang
fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be
Summary:
Provide support for async_io if ReadOptions.tailing is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10781
Test Plan:
- Update unit tests
- Ran db_bench: ./db_bench --benchmarks="readrandom" --use_existing_db --use_tailing_iterator=1 --async_io=1
Reviewed By: anand1976
Differential Revision: D40128882
Pulled By: anand1976
fbshipit-source-id: 55e17855536871a5c47e2de92d238ae005c32d01
Summary:
Add option `preserve_internal_time_seconds` to preserve the internal
time information.
It's mostly for the migration of the existing data to tiered storage (
`preclude_last_level_data_seconds`). When the tiering feature is just
enabled, the existing data won't have the time information to decide if
it's hot or cold. Enabling this feature will start collect and preserve
the time information for the new data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10747
Reviewed By: siying
Differential Revision: D39910141
Pulled By: siying
fbshipit-source-id: 25c21638e37b1a7c44006f636b7d714fe7242138
Summary:
We have seen some rare crash test failures in HyperClockCache, and the source could certainly be a bug fixed in this change, in ClockHandleTable::ConstApplyToEntriesRange. It wasn't properly accounting for the fact that incrementing the acquire counter could be ineffective, due to parallel updates. (When incrementing the acquire counter is ineffective, it is incorrect to then decrement it.)
This change includes some other minor clean-up in HyperClockCache, and adds stats_dump_period_sec with a much lower period to the crash test. This should be the primary caller of ApplyToEntries, in collecting cache entry stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10768
Test Plan: haven't been able to reproduce the failure, but should be in a better state (bug fix and improved crash test)
Reviewed By: anand1976
Differential Revision: D40034747
Pulled By: anand1976
fbshipit-source-id: a06fcefe146e17ee35001984445cedcf3b63eb68
Summary:
With current implementation, within the same RocksDB instance, all column families with non-empty memtables will be scheduled for flush if RocksDB determines that any column family needs to be flushed, e.g. memtable full, write buffer manager, etc., if atomic flush is enabled. Not doing so can lead to data loss and inconsistency when WAL is disabled, which is a common setting when atomic flush is enabled. Therefore, setting a per-column-family knob, min_write_buffer_number_to_merge to a value greater than 1 is not compatible with atomic flush, and should be sanitized during column family creation and db open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10773
Test Plan:
Reproduce: D39993203 has detailed steps.
Run the test with and without the fix.
Reviewed By: cbi42
Differential Revision: D40077955
Pulled By: cbi42
fbshipit-source-id: 451a9179eb531ac42eaccf40b451b9dec4085240
Summary:
fix for https://github.com/facebook/rocksdb/issues/10752 where RocksDB could be in an infinite compaction loop (with compaction reason kBottommostFiles) if allow_ingest_behind is enabled and the bottommost level is unfilled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10767
Test Plan: Added a unit test to reproduce the compaction loop.
Reviewed By: ajkr
Differential Revision: D40031861
Pulled By: ajkr
fbshipit-source-id: 71c4b02931fbe507a847632905404c9b8fa8c96b
Summary:
Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770
Test Plan: added a unit test to reproduce the issue.
Reviewed By: ajkr
Differential Revision: D40063809
Pulled By: ajkr
fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
For RoundRobin compaction, the data should be mostly sorted per level and within level. Use normal compaction picker for RR until all expired data is compacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10725
Reviewed By: ajkr
Differential Revision: D39771069
Pulled By: jay-zhuang
fbshipit-source-id: 7ccf88d7c093fad5673bda73a7b08cc4757780cd
Summary:
Add new property "do_not_recurse" in IOOptions for underlying file system to skip iteration of directories during DB::Open if there are no sub directories and list only files.
By default this property is set to false. This property is set true currently in the code where RocksDB is sure only files are needed during DB::Open.
Provided support in PosixFileSystem to use "do_not_recurse".
TestPlan:
- Existing tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10668
Reviewed By: anand1976
Differential Revision: D39471683
Pulled By: akankshamahajan15
fbshipit-source-id: 90e32f0b86d5346d53bc2714d3a0e7002590527f
Summary:
Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are
- internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps.
- Garbage collection of range tombstones and range tombstone covered keys during compaction.
- Get()/MultiGet() to return the timestamp of a range tombstone when needed.
- Get/Iterator with range tombstones bounded by readoptions.timestamp.
- timestamp crash test now issues DeleteRange by default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661
Test Plan:
- Added unit test: `make check`
- Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case.
| micros/op | fillrandom | seekrandom |
| --- | --- | --- |
|main| 2.58 |10.96|
|PR 10661| 2.68 |10.63|
Reviewed By: riversand963
Differential Revision: D39441192
Pulled By: cbi42
fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
when a new internal iterator is constructed during iterator refresh, pointer to the previous memtable range tombstone iterator was not cleared. This could cause segfault for future `Refresh()` calls when they try to free the memtable range tombstones. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10739
Test Plan: added a unit test in db_range_del_test.cc to reproduce this issue.
Reviewed By: ajkr, riversand963
Differential Revision: D39825283
Pulled By: cbi42
fbshipit-source-id: 3b59a2b73865aed39e28cdd5c1b57eed7991b94c
Summary:
Update io_uring_prep_cancel as it is now backward compatible.
Also, io_uring_prep_cancel expects sqe->addr to match with read
request submitted. It's being set wrong which is now fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10644
Test Plan:
- Ran internally with lastest liburing package and on RocksDB
github repo with older version.
- Ran seekrandom regression to confirm there is no regression.
Reviewed By: anand1976
Differential Revision: D39284229
Pulled By: akankshamahajan15
fbshipit-source-id: fd52cdf23d676da114896163626b75c8ae09c980
Summary:
This PR bumps up version number from 7.7 to 7.8 in main branch, indicating that next release will be 7.8. We are going to release 7.7 soon. Since 7.7.fb branch has been created, we can land this to main.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10694
Reviewed By: gitbw95
Differential Revision: D39581577
Pulled By: riversand963
fbshipit-source-id: 84f3fecf25fd9ac96e46b4cd6d50ddb6edc89427
Summary:
`enable_custom_split_merge` is added for enabling the custom split and merge feature, which split the compressed value into chunks so that they may better fit jemalloc bins.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10690
Test Plan:
Unit Tests
Stress Tests
Reviewed By: anand1976
Differential Revision: D39567604
Pulled By: gitbw95
fbshipit-source-id: f6d1d46200f365220055f793514601dcb0edc4b7
Summary:
This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons:
* We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache."
* We want to highlight the key feature: it's fast (especially under parallel load)
* Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements.
* We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.)
Some API detail:
* To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`.
* Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated.
For performance tests see https://github.com/facebook/rocksdb/pull/10626
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684
Test Plan: no interesting functional changes; tests updated
Reviewed By: anand1976
Differential Revision: D39547800
Pulled By: pdillinger
fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf
Summary:
The stats were not accurate for the coroutine version of MultiGet. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10673
Reviewed By: akankshamahajan15
Differential Revision: D39492615
Pulled By: anand1976
fbshipit-source-id: b46c04e15ea27e66f4c31f00c66497aa283bf9d3
Summary:
Change the ```ReadOptions.optimize_multiget_for_io``` flag to default on. It doesn't impact regular MultiGet users as its only applicable when ```ReadOptions.async_io``` is also set to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10671
Reviewed By: akankshamahajan15
Differential Revision: D39477439
Pulled By: anand1976
fbshipit-source-id: 47abcdbfa69f9bc60422ab68a238b232e085d4ba
Summary:
Each read from memtable used to read and fragment all the range tombstones into a `FragmentedRangeTombstoneList`. https://github.com/facebook/rocksdb/issues/10380 improved the inefficient here by caching a `FragmentedRangeTombstoneList` with each immutable memtable. This PR extends the caching to mutable memtables. The fragmented range tombstone can be constructed in either read (This PR) or write path (https://github.com/facebook/rocksdb/issues/10584). With both implementation, each `DeleteRange()` will invalidate the cache, and the difference is where the cache is re-constructed.`CoreLocalArray` is used to store the cache with each memtable so that multi-threaded reads can be efficient. More specifically, each core will have a shared_ptr to a shared_ptr pointing to the current cache. Each read thread will only update the reference count in its core-local shared_ptr, and this is only needed when reading from mutable memtables.
The choice between write path and read path is not an easy one: they are both improvement compared to no caching in the current implementation, but they favor different operations and could cause regression in the other operation (read vs write). The write path caching in (https://github.com/facebook/rocksdb/issues/10584) leads to a cleaner implementation, but I chose the read path caching here to avoid significant regression in write performance when there is a considerable amount of range tombstones in a single memtable (the number from the benchmark below suggests >1000 with concurrent writers). Note that even though the fragmented range tombstone list is only constructed in `DeleteRange()` operations, it could block other writes from proceeding, and hence affects overall write performance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10547
Test Plan:
- TestGet() in stress test is updated in https://github.com/facebook/rocksdb/issues/10553 to compare Get() result against expected state: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`
- Perf benchmark: tested read and write performance where a memtable has 0, 1, 10, 100 and 1000 range tombstones.
```
./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=200000 --reads=100000 --disable_auto_compactions --max_num_range_tombstones=1000
```
Write perf regressed since the cost of constructing fragmented range tombstone list is shifted from every read to a single write. 6cbe5d8e172dc5f1ef65c9d0a6eedbd9987b2c72 is included in the last column as a reference to see performance impact on multi-thread reads if `CoreLocalArray` is not used.
micros/op averaged over 5 runs: first 4 columns are for fillrandom, last 4 columns are for readrandom.
| |fillrandom main | write path caching | read path caching |memtable V3 (https://github.com/facebook/rocksdb/issues/10308) | readrandom main | write path caching | read path caching |memtable V3 |
|--- |--- |--- |--- |--- | --- | --- | --- | --- |
| 0 |6.35 |6.15 |5.82 |6.12 |2.24 |2.26 |2.03 |2.07 |
| 1 |5.99 |5.88 |5.77 |6.28 |2.65 |2.27 |2.24 |2.5 |
| 10 |6.15 |6.02 |5.92 |5.95 |5.15 |2.61 |2.31 |2.53 |
| 100 |5.95 |5.78 |5.88 |6.23 |28.31 |2.34 |2.45 |2.94 |
| 100 25 threads |52.01 |45.85 |46.18 |47.52 |35.97 |3.34 |3.34 |3.56 |
| 1000 |6.0 |7.07 |5.98 |6.08 |333.18 |2.86 |2.7 |3.6 |
| 1000 25 threads |52.6 |148.86 |79.06 |45.52 |473.49 |3.66 |3.48 |4.38 |
- Benchmark performance of`readwhilewriting` from https://github.com/facebook/rocksdb/issues/10552, 100 range tombstones are written: `./db_bench --benchmarks=readwhilewriting --writes_per_range_tombstone=500 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=100000 --reads=500000 --disable_auto_compactions --max_num_range_tombstones=10000 --finish_after_writes`
readrandom micros/op:
| |main |write path caching |read path caching |memtable V3 |
|---|---|---|---|---|
| single thread |48.28 |1.55 |1.52 |1.96 |
| 25 threads |64.3 |2.55 |2.67 |2.64 |
Reviewed By: ajkr
Differential Revision: D38895410
Pulled By: cbi42
fbshipit-source-id: 930bfc309dd1b2f4e8e9042f5126785bba577559
Summary:
Although we've been tracking SST unique IDs in the DB manifest
unconditionally, checking has been opt-in and with an extra pass at DB::Open
time. This changes the behavior of `verify_sst_unique_id_in_manifest` to
check unique ID against manifest every time an SST file is opened through
table cache (normal DB operations), replacing the explicit pass over files
at DB::Open time. This change also enables the option by default and
removes the "EXPERIMENTAL" designation.
One possible criticism is that the option no longer ensures the integrity
of a DB at Open time. This is far from an all-or-nothing issue. Verifying
the IDs of all SST files hardly ensures all the data in the DB is readable.
(VerifyChecksum is supposed to do that.) Also, with
max_open_files=-1 (default, extremely common), all SST files are
opened at DB::Open time anyway.
Implementation details:
* `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass
that is now removed.
* Unit tests that manipulate/corrupt table properties have to opt out of
this check, because that corrupts the "actual" unique id. (And even for
testing we don't currently have a mechanism to set "no unique id"
in the in-memory file metadata for new files.)
* A lot of other unit test churn relates to (a) default checking on, and
(b) checking on SST open even without DB::Open (e.g. on flush)
* Use `FileMetaData` for more `TableCache` operations (in place of
`FileDescriptor`) so that we have access to the unique_id whenever
we might need to open an SST file. **There is the possibility of
performance impact because we can no longer use the more
localized `fd` part of an `FdWithKeyRange` but instead follow the
`file_metadata` pointer. However, this change (possible regression)
is only done for `GetMemoryUsageByTableReaders`.**
* Removed a completely unnecessary constructor overload of
`TableReaderOptions`
Possible follow-up:
* Verification only happens when opening through table cache. Are there
more places where this should happen?
* Improve error message when there is a file size mismatch vs. manifest
(FIXME added in the appropriate place).
* I'm not sure there's a justification for `FileDescriptor` to be distinct from
`FileMetaData`.
* I'm skeptical that `FdWithKeyRange` really still makes sense for
optimizing some data locality by duplicating some data in memory, but I
could be wrong.
* An unnecessary overload of NewTableReader was recently added, in
the public API nonetheless (though unusable there). It should be cleaned
up to put most things under `TableReaderOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532
Test Plan:
updated unit tests
Performance test showing no significant difference (just noise I think):
`./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000`
Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec
After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec
Reviewed By: jay-zhuang
Differential Revision: D38765551
Pulled By: pdillinger
fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file if user doesn't provide readahead_size and reads are sequential.
A new option num_file_reads_for_auto_readahead is added which can be
configured and indicates after how many sequential reads prefetching should
be start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556
Test Plan: Existing and new unit test
Reviewed By: anand1976
Differential Revision: D38947147
Pulled By: akankshamahajan15
fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97
Summary:
This stat was only getting updated in the async (coroutine) version of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622
Reviewed By: akankshamahajan15
Differential Revision: D39188790
Pulled By: anand1976
fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
Summary:
Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600
Test Plan: Add unit tests for that.
Reviewed By: jay-zhuang
Differential Revision: D39106424
fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585
Reviewed By: akankshamahajan15
Differential Revision: D39067000
Pulled By: anand1976
fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf
Summary:
Some APIs for getting live files, which are used by Checkpoint
and BackupEngine, can optionally trigger and wait for a flush. These
would deadlock when used on a read-only DB. Here we fix that by assuming
the user wants the overall operation to succeed and is OK without
flushing (because the DB is read-only).
Follow-up work: the same or other issues can be hit by directly invoking
some DB functions that are clearly not appropriate for read-only
instance, but are not covered by overrides in DBImplReadOnly and
CompactedDBImpl. These should be fixed to avoid similar problems on
accidental misuse. (Long term, it would be nice to have a DBReadOnly
class without those members, like BackupEngineReadOnly.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569
Test Plan: tests updated to catch regression (hang before the fix)
Reviewed By: riversand963
Differential Revision: D38995759
Pulled By: pdillinger
fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
Summary:
Timer has a limitation that it cannot re-register a task with the same name,
because the cancel only mark the task as invalid and wait for the Timer thread
to clean it up later, before the task is cleaned up, the same task name cannot
be added. Which makes the task option update likely to fail, which basically
cancel and re-register the same task name. Change the periodic task name to a
random unique id and store it in periodic_task_scheduler.
Also refactor the `periodic_work` to `periodic_task` to make each job function
as a `task`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379
Test Plan: unittests
Reviewed By: ajkr
Differential Revision: D38000615
Pulled By: jay-zhuang
fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
Summary:
WAL append and switch can both happen between `FlushWAL(true /* sync */)`'s sync operations and its call to `MarkLogsSynced()`. We permit this since locks need to be released for the sync operations. Such an appended/switched WAL is both inactive and incompletely synced at the time `MarkLogsSynced()` processes it.
Prior to this PR, `MarkLogsSynced()` assumed all inactive WALs were fully synced and removed them from consideration for future syncs. That was wrong in the scenario described above and led to the latest append(s) never being synced. This PR changes `MarkLogsSynced()` to only remove inactive WALs from consideration for which all flushed data has been synced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10560
Test Plan: repro unit test for the scenario described above. Without this PR, it fails on "key2" not found
Reviewed By: riversand963
Differential Revision: D38957391
Pulled By: ajkr
fbshipit-source-id: da77175eba97ff251a4219b227b3bb2d4843ed26
Summary:
As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913,
`db_stress` does not have much verification for iterator correctness.
It has a `TestIterate()` function, but that is mainly for comparing results
between two iterators, one with `total_order_seek` and the other optionally
sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33
added a new `TestIterateAgainstExpected()` function that compares iterator against
expected state. It locks a range of keys, creates an iterator, does
a random sequence of `Next/Prev` and compares against expected state.
This PR is based on that commit, the main changes include some logs
(for easier debugging if a test fails), a forward and backward scan to
cover the entire locked key range, and a flag for optionally turning on
this version of Iterator testing.
Added constraint that the checks against expected state in
`TestIterateAgainstExpected()` and in `TestGet()` are only turned on
when `--skip_verifydb` flag is not set.
Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538
Test Plan:
Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`,
and a large `--iterpercent` and `--num_iterations`. Checked `op_logs`
manually to ensure expected coverage. Tweaked part of the code in
https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it.
- internally run various flavor of crash test
Reviewed By: ajkr
Differential Revision: D38847269
Pulled By: cbi42
fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
Summary:
updated `TestGet()` in `no_batched_op_stress` to check the result of `Get()` operations against expected state (`expected_state_manager_`). More specifically, if `Get()` finds a key, expected state should not have `DELETION_SENTINEL` for the same key, and if `Get()` returns NotFound for a key, expected state should not have the key. One intention for this change it to verify correctness of code path change regarding range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10553
Test Plan: run db_stress with nonzero readpercent: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`. When I initially used wrong column family in `thread->shared->Get`, the test reported inconsistencies.
Reviewed By: ajkr
Differential Revision: D38927007
Pulled By: cbi42
fbshipit-source-id: f9f61b312ad0b4c21a799329609ba8526169b048
Summary:
This PR exploits parallelism in MultiGet across levels. It applies only to the coroutine version of MultiGet. Previously, MultiGet file reads from SST files in the same level were parallelized. With this PR, MultiGet batches with keys distributed across multiple levels are read in parallel. This is accomplished by splitting the keys not present in a level (determined by bloom filtering) into a separate batch, and processing the new batch in parallel with the original batch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10535
Test Plan:
1. Ensure existing MultiGet unit tests pass, updating them as necessary
2. New unit tests - TODO
3. Run stress test - TODO
No noticeable regression (<1%) without async IO -
Without PR: `multireadrandom : 7.261 micros/op 1101724 ops/sec 60.007 seconds 66110936 operations; 571.6 MB/s (8168992 of 8168992 found)`
With PR: `multireadrandom : 7.305 micros/op 1095167 ops/sec 60.007 seconds 65717936 operations; 568.2 MB/s (8271992 of 8271992 found)`
For a fully cached DB, but with async IO option on, no regression observed (<1%) -
Without PR: `multireadrandom : 5.201 micros/op 1538027 ops/sec 60.005 seconds 92288936 operations; 797.9 MB/s (11540992 of 11540992 found) `
With PR: `multireadrandom : 5.249 micros/op 1524097 ops/sec 60.005 seconds 91452936 operations; 790.7 MB/s (11649992 of 11649992 found) `
Reviewed By: akankshamahajan15
Differential Revision: D38774009
Pulled By: anand1976
fbshipit-source-id: c955e259749f1c091590ade73105b3ee46cd0007
Summary:
This reverts commit 0d885e80d4. The original commit causes a ASAN stack-use-after-return failure due to the `CreateCallback` being allocated on stack and then used in another thread when a secondary cache object is promoted to the primary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10541
Reviewed By: gitbw95
Differential Revision: D38850039
Pulled By: anand1976
fbshipit-source-id: 810c592b7de2523693f5bb267159b23b0ee9132c
Summary:
Previously, the flushes triggered by `WriteBufferManager` could affect
the same CF repeatedly if it happens to get consecutive writes. Such
flushes are not particularly useful for reducing memory usage since
they switch nearly-empty memtables to immutable while they've just begun
filling their first arena block. In fact they may not even reduce the
mutable memory count if they involve replacing one mutable memtable containing
one arena block with a new mutable memtable containing one arena block.
Further, if such switches happen even a few times before a flush finishes,
the immutable memtable limit will be reached and writes will stall.
This PR adds a heuristic to not switch memtables to immutable for CFs
that already have one or more immutable memtables awaiting flush. There
is a memory usage regression if the user continues writing to the same
CF, that DB does not have any CFs eligible for switching, flushes
are not finishing, and the `WriteBufferManager` was constructed with
`allow_stall=false`. Before, it would grow by switching nearly empty
memtables until writes stall. Now, it would grow by filling memtables
until writes stall. This feels like an acceptable behavior change because
users who prefer to stall over violate the memory limit should be using
`allow_stall=true`, which is unaffected by this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6364
Test Plan:
- Command:
`rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num_multi_db=8 -num_column_families=2 -write_buffer_size=4194304 -db_write_buffer_size=16777216 -compression_type=none -statistics=true -target_file_size_base=4194304 -max_bytes_for_level_base=16777216`
- `rocksdb.db.write.stall` count before this PR: 175
- `rocksdb.db.write.stall` count after this PR: 0
Reviewed By: jay-zhuang
Differential Revision: D20167197
Pulled By: ajkr
fbshipit-source-id: 4a64064e9bc33d57c0a35f15547542d0191d0cb7
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
