rocksdb/db/db_impl.cc

2950 lines
100 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/db_impl.h"
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <stdint.h>
2016-01-19 06:17:31 +00:00
#ifdef OS_SOLARIS
#include <alloca.h>
2016-01-19 06:17:31 +00:00
#endif
#include <algorithm>
#include <cstdio>
#include <map>
#include <set>
#include <stdexcept>
#include <string>
#include <unordered_map>
#include <unordered_set>
#include <utility>
#include <vector>
#include "db/builder.h"
#include "db/compaction_job.h"
#include "db/db_info_dumper.h"
#include "db/db_iter.h"
#include "db/dbformat.h"
#include "db/event_helpers.h"
#include "db/external_sst_file_ingestion_job.h"
#include "db/flush_job.h"
#include "db/forward_iterator.h"
#include "db/job_context.h"
#include "db/log_reader.h"
#include "db/log_writer.h"
db: avoid `#include`ing malloc and jemalloc simultaneously Summary: This fixes a compilation failure on Linux when the system libc is not glibc. jemalloc's configure script incorrectly assumes that glibc is always used on Linux systems, producing glibc-style signatures; when the system libc is e.g. musl, the following error is observed: ``` [ 0%] Building CXX object CMakeFiles/rocksdb.dir/db/db_impl.cc.o In file included from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/table/block.h:19:0, from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/db/db_impl.cc:77: /x-tools/x86_64-unknown-linux-musl/x86_64-unknown-linux-musl/sysroot/usr/include/malloc.h:19:8: error: declaration of 'size_t malloc_usable_size(void*)' has a different exception specifier size_t malloc_usable_size(void *); ^~~~~~~~~~~~~~~~~~ In file included from /go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb.src/db/db_impl.cc:20:0: /go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:78:33: note: from previous declaration 'size_t malloc_usable_size(void*) throw ()' # define je_malloc_usable_size malloc_usable_size ^ /go/native/x86_64-unknown-linux-musl/jemalloc/include/jemalloc/jemalloc.h:239:41: note: in expansion of macro 'je_malloc_usable_size' JEMALLOC_EXPORT size_t JEMALLOC_NOTHROW je_malloc_usable_size( ^~~~~~~~~~~~~~~~~~~~~ CMakeFiles/rocksdb.dir/build.make:350: recipe for target 'CMakeFiles/rocksdb.dir/db/db_impl.cc.o' failed ``` This works around the issue by rearranging the sources such that jemalloc's headers are never in the same scope as the system's malloc header. The jemalloc issue has been reported as well, see: https://github.com/jemalloc/jemalloc/issues/778. cc tschottdorf Closes https://github.com/facebook/rocksdb/pull/2188 Differential Revision: D5163048 Pulled By: siying fbshipit-source-id: c553125458892def175c1be5682b0330d80b2a0d
2017-06-01 05:41:44 +00:00
#include "db/malloc_stats.h"
#include "db/managed_iterator.h"
#include "db/memtable.h"
2013-12-11 03:03:13 +00:00
#include "db/memtable_list.h"
#include "db/merge_context.h"
#include "db/merge_helper.h"
#include "db/range_del_aggregator.h"
#include "db/table_cache.h"
#include "db/table_properties_collector.h"
#include "db/transaction_log_impl.h"
#include "db/version_set.h"
#include "db/write_batch_internal.h"
#include "db/write_callback.h"
#include "memtable/hash_linklist_rep.h"
#include "memtable/hash_skiplist_rep.h"
#include "monitoring/iostats_context_imp.h"
#include "monitoring/perf_context_imp.h"
#include "monitoring/thread_status_updater.h"
#include "monitoring/thread_status_util.h"
#include "options/cf_options.h"
#include "options/options_helper.h"
#include "options/options_parser.h"
#include "port/port.h"
#include "rocksdb/cache.h"
#include "rocksdb/compaction_filter.h"
#include "rocksdb/convenience.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/merge_operator.h"
#include "rocksdb/statistics.h"
#include "rocksdb/status.h"
#include "rocksdb/table.h"
#include "rocksdb/write_buffer_manager.h"
#include "table/block.h"
#include "table/block_based_table_factory.h"
#include "table/merging_iterator.h"
#include "table/table_builder.h"
#include "table/two_level_iterator.h"
#include "tools/sst_dump_tool_imp.h"
#include "util/auto_roll_logger.h"
#include "util/autovector.h"
#include "util/build_version.h"
#include "util/coding.h"
#include "util/compression.h"
#include "util/crc32c.h"
#include "util/file_reader_writer.h"
#include "util/file_util.h"
#include "util/filename.h"
#include "util/log_buffer.h"
#include "util/logging.h"
#include "util/mutexlock.h"
#include "util/sst_file_manager_impl.h"
#include "util/stop_watch.h"
#include "util/string_util.h"
#include "util/sync_point.h"
namespace rocksdb {
const std::string kDefaultColumnFamilyName("default");
void DumpRocksDBBuildVersion(Logger * log);
CompressionType GetCompressionFlush(
const ImmutableCFOptions& ioptions,
const MutableCFOptions& mutable_cf_options) {
// Compressing memtable flushes might not help unless the sequential load
// optimization is used for leveled compaction. Otherwise the CPU and
// latency overhead is not offset by saving much space.
if (ioptions.compaction_style == kCompactionStyleUniversal) {
if (mutable_cf_options.compaction_options_universal
.compression_size_percent < 0) {
return mutable_cf_options.compression;
} else {
return kNoCompression;
}
} else if (!ioptions.compression_per_level.empty()) {
// For leveled compress when min_level_to_compress != 0.
return ioptions.compression_per_level[0];
} else {
return mutable_cf_options.compression;
}
}
namespace {
void DumpSupportInfo(Logger* logger) {
ROCKS_LOG_HEADER(logger, "Compression algorithms supported:");
for (auto& compression : OptionsHelper::compression_type_string_map) {
if (compression.second != kNoCompression &&
compression.second != kDisableCompressionOption) {
ROCKS_LOG_HEADER(logger, "\t%s supported: %d", compression.first.c_str(),
CompressionTypeSupported(compression.second));
}
}
ROCKS_LOG_HEADER(logger, "Fast CRC32 supported: %s",
crc32c::IsFastCrc32Supported().c_str());
}
int64_t kDefaultLowPriThrottledRate = 2 * 1024 * 1024;
} // namespace
DBImpl::DBImpl(const DBOptions& options, const std::string& dbname,
const bool seq_per_batch)
: env_(options.env),
dbname_(dbname),
own_info_log_(options.info_log == nullptr),
initial_db_options_(SanitizeOptions(dbname, options)),
immutable_db_options_(initial_db_options_),
mutable_db_options_(initial_db_options_),
stats_(immutable_db_options_.statistics.get()),
db_lock_(nullptr),
mutex_(stats_, env_, DB_MUTEX_WAIT_MICROS,
immutable_db_options_.use_adaptive_mutex),
shutting_down_(false),
bg_cv_(&mutex_),
logfile_number_(0),
log_dir_synced_(false),
log_empty_(true),
default_cf_handle_(nullptr),
log_sync_cv_(&mutex_),
total_log_size_(0),
max_total_in_memory_state_(0),
is_snapshot_supported_(true),
write_buffer_manager_(immutable_db_options_.write_buffer_manager.get()),
write_thread_(immutable_db_options_),
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
nonmem_write_thread_(immutable_db_options_),
write_controller_(mutable_db_options_.delayed_write_rate),
// Use delayed_write_rate as a base line to determine the initial
// low pri write rate limit. It may be adjusted later.
low_pri_write_rate_limiter_(NewGenericRateLimiter(std::min(
static_cast<int64_t>(mutable_db_options_.delayed_write_rate / 8),
kDefaultLowPriThrottledRate))),
last_batch_group_size_(0),
Rewritten system for scheduling background work Summary: When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue. The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction. Here are the performance results: Command: ./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333 Before the patch: fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s After the patch: fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got: fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s Test Plan: make check two stress tests: Big number of compactions and flushes: ./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 max_background_flushes=0, to verify that this case also works correctly ./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 Reviewers: ljin, rven, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D30123
2014-12-19 19:38:12 +00:00
unscheduled_flushes_(0),
unscheduled_compactions_(0),
Introduce bottom-pri thread pool for large universal compactions Summary: When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs. This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions. - Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads. - Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default. - Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic. - Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`). - Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free. Closes https://github.com/facebook/rocksdb/pull/2580 Differential Revision: D5422916 Pulled By: ajkr fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 22:36:28 +00:00
bg_bottom_compaction_scheduled_(0),
bg_compaction_scheduled_(0),
num_running_compactions_(0),
bg_flush_scheduled_(0),
num_running_flushes_(0),
bg_purge_scheduled_(0),
disable_delete_obsolete_files_(0),
pending_purge_obsolete_files_(0),
delete_obsolete_files_last_run_(env_->NowMicros()),
last_stats_dump_time_microsec_(0),
next_job_id_(1),
has_unpersisted_data_(false),
unable_to_flush_oldest_log_(false),
env_options_(BuildDBOptions(immutable_db_options_, mutable_db_options_)),
env_options_for_compaction_(env_->OptimizeForCompactionTableWrite(
env_options_, immutable_db_options_)),
num_running_ingest_file_(0),
#ifndef ROCKSDB_LITE
wal_manager_(immutable_db_options_, env_options_, seq_per_batch),
#endif // ROCKSDB_LITE
event_logger_(immutable_db_options_.info_log.get()),
bg_work_paused_(0),
bg_compaction_paused_(0),
refitting_level_(false),
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
opened_successfully_(false),
two_write_queues_(options.two_write_queues),
manual_wal_flush_(options.manual_wal_flush),
seq_per_batch_(seq_per_batch),
// last_sequencee_ is always maintained by the main queue that also writes
// to the memtable. When two_write_queues_ is disabled last seq in
// memtable is the same as last seq published to the readers. When it is
// enabled but seq_per_batch_ is disabled, last seq in memtable still
// indicates last published seq since wal-only writes that go to the 2nd
// queue do not consume a sequence number. Otherwise writes performed by
// the 2nd queue could change what is visible to the readers. In this
// cases, last_seq_same_as_publish_seq_==false, the 2nd queue maintains a
// separate variable to indicate the last published sequence.
last_seq_same_as_publish_seq_(
!(seq_per_batch && options.two_write_queues)),
// Since seq_per_batch_ is currently set only by WritePreparedTxn which
// requires a custom gc for compaction, we use that to set use_custom_gc_
// as well.
use_custom_gc_(seq_per_batch),
preserve_deletes_(options.preserve_deletes),
closed_(false) {
env_->GetAbsolutePath(dbname, &db_absolute_path_);
// Reserve ten files or so for other uses and give the rest to TableCache.
// Give a large number for setting of "infinite" open files.
const int table_cache_size = (mutable_db_options_.max_open_files == -1)
? TableCache::kInfiniteCapacity
: mutable_db_options_.max_open_files - 10;
table_cache_ = NewLRUCache(table_cache_size,
immutable_db_options_.table_cache_numshardbits);
versions_.reset(new VersionSet(dbname_, &immutable_db_options_, env_options_,
table_cache_.get(), write_buffer_manager_,
&write_controller_));
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
column_family_memtables_.reset(
new ColumnFamilyMemTablesImpl(versions_->GetColumnFamilySet()));
DumpRocksDBBuildVersion(immutable_db_options_.info_log.get());
DumpDBFileSummary(immutable_db_options_, dbname_);
immutable_db_options_.Dump(immutable_db_options_.info_log.get());
mutable_db_options_.Dump(immutable_db_options_.info_log.get());
DumpSupportInfo(immutable_db_options_.info_log.get());
Added support for differential snapshots Summary: The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2). This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages. From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff". This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR. For now, what's done here according to initial discussions: Preserving deletes: - We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion. - I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum. - Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum. Iterator changes: - couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum. TableCache changes: - I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span. What's left: - Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type. Closes https://github.com/facebook/rocksdb/pull/2999 Differential Revision: D6175602 Pulled By: mikhail-antonov fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
2017-11-02 01:43:29 +00:00
// always open the DB with 0 here, which means if preserve_deletes_==true
// we won't drop any deletion markers until SetPreserveDeletesSequenceNumber()
// is called by client and this seqnum is advanced.
preserve_deletes_seqnum_.store(0);
}
// Will lock the mutex_, will wait for completion if wait is true
void DBImpl::CancelAllBackgroundWork(bool wait) {
InstrumentedMutexLock l(&mutex_);
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"Shutdown: canceling all background work");
if (!shutting_down_.load(std::memory_order_acquire) &&
has_unpersisted_data_.load(std::memory_order_relaxed) &&
!mutable_db_options_.avoid_flush_during_shutdown) {
for (auto cfd : *versions_->GetColumnFamilySet()) {
if (!cfd->IsDropped() && cfd->initialized() && !cfd->mem()->IsEmpty()) {
cfd->Ref();
mutex_.Unlock();
FlushMemTable(cfd, FlushOptions());
mutex_.Lock();
cfd->Unref();
}
}
versions_->GetColumnFamilySet()->FreeDeadColumnFamilies();
}
Persist data during user initiated shutdown Summary: Move the manual memtable flush for databases containing data that has bypassed the WAL from DBImpl's destructor to CancleAllBackgroundWork(). CancelAllBackgroundWork() is a publicly exposed API which allows async operations performed by background threads to be disabled on a database. In effect, this places the database into a "shutdown" state in advance of calling the database object's destructor. No compactions or flushing of SST files can occur once a call to this API completes. When writes are issued to a database with WriteOptions::disableWAL set to true, DBImpl::has_unpersisted_data_ is set so that memtables can be flushed when the database object is destroyed. If CancelAllBackgroundWork() has been called prior to DBImpl's destructor, this flush operation is not possible and is skipped, causing unnecessary loss of data. Since CancelAllBackgroundWork() is already invoked by DBImpl's destructor in order to perform the thread join portion of its cleanup processing, moving the manual memtable flush to CancelAllBackgroundWork() ensures data is persisted regardless of client behavior. Test Plan: Write an amount of data that will not cause a memtable flush to a rocksdb database with all writes marked with WriteOptions::disableWAL. Properly "close" the database. Reopen database and verify that the data was persisted. Reviewers: IslamAbdelRahman, yiwu, yoshinorim, sdong Reviewed By: sdong Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D62277
2016-08-25 19:24:22 +00:00
shutting_down_.store(true, std::memory_order_release);
bg_cv_.SignalAll();
if (!wait) {
return;
}
// Wait for background work to finish
Introduce bottom-pri thread pool for large universal compactions Summary: When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs. This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions. - Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads. - Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default. - Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic. - Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`). - Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free. Closes https://github.com/facebook/rocksdb/pull/2580 Differential Revision: D5422916 Pulled By: ajkr fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 22:36:28 +00:00
while (bg_bottom_compaction_scheduled_ || bg_compaction_scheduled_ ||
bg_flush_scheduled_) {
Persist data during user initiated shutdown Summary: Move the manual memtable flush for databases containing data that has bypassed the WAL from DBImpl's destructor to CancleAllBackgroundWork(). CancelAllBackgroundWork() is a publicly exposed API which allows async operations performed by background threads to be disabled on a database. In effect, this places the database into a "shutdown" state in advance of calling the database object's destructor. No compactions or flushing of SST files can occur once a call to this API completes. When writes are issued to a database with WriteOptions::disableWAL set to true, DBImpl::has_unpersisted_data_ is set so that memtables can be flushed when the database object is destroyed. If CancelAllBackgroundWork() has been called prior to DBImpl's destructor, this flush operation is not possible and is skipped, causing unnecessary loss of data. Since CancelAllBackgroundWork() is already invoked by DBImpl's destructor in order to perform the thread join portion of its cleanup processing, moving the manual memtable flush to CancelAllBackgroundWork() ensures data is persisted regardless of client behavior. Test Plan: Write an amount of data that will not cause a memtable flush to a rocksdb database with all writes marked with WriteOptions::disableWAL. Properly "close" the database. Reopen database and verify that the data was persisted. Reviewers: IslamAbdelRahman, yiwu, yoshinorim, sdong Reviewed By: sdong Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D62277
2016-08-25 19:24:22 +00:00
bg_cv_.Wait();
}
}
Status DBImpl::CloseImpl() {
// CancelAllBackgroundWork called with false means we just set the shutdown
// marker. After this we do a variant of the waiting and unschedule work
// (to consider: moving all the waiting into CancelAllBackgroundWork(true))
CancelAllBackgroundWork(false);
Introduce bottom-pri thread pool for large universal compactions Summary: When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs. This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions. - Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads. - Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default. - Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic. - Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`). - Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free. Closes https://github.com/facebook/rocksdb/pull/2580 Differential Revision: D5422916 Pulled By: ajkr fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 22:36:28 +00:00
int bottom_compactions_unscheduled =
env_->UnSchedule(this, Env::Priority::BOTTOM);
int compactions_unscheduled = env_->UnSchedule(this, Env::Priority::LOW);
int flushes_unscheduled = env_->UnSchedule(this, Env::Priority::HIGH);
mutex_.Lock();
Introduce bottom-pri thread pool for large universal compactions Summary: When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs. This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions. - Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads. - Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default. - Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic. - Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`). - Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free. Closes https://github.com/facebook/rocksdb/pull/2580 Differential Revision: D5422916 Pulled By: ajkr fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 22:36:28 +00:00
bg_bottom_compaction_scheduled_ -= bottom_compactions_unscheduled;
bg_compaction_scheduled_ -= compactions_unscheduled;
bg_flush_scheduled_ -= flushes_unscheduled;
// Wait for background work to finish
Introduce bottom-pri thread pool for large universal compactions Summary: When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs. This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions. - Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads. - Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default. - Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic. - Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`). - Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free. Closes https://github.com/facebook/rocksdb/pull/2580 Differential Revision: D5422916 Pulled By: ajkr fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 22:36:28 +00:00
while (bg_bottom_compaction_scheduled_ || bg_compaction_scheduled_ ||
bg_flush_scheduled_ || bg_purge_scheduled_ ||
pending_purge_obsolete_files_) {
TEST_SYNC_POINT("DBImpl::~DBImpl:WaitJob");
bg_cv_.Wait();
}
EraseThreadStatusDbInfo();
flush_scheduler_.Clear();
Rewritten system for scheduling background work Summary: When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue. The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction. Here are the performance results: Command: ./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333 Before the patch: fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s After the patch: fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got: fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s Test Plan: make check two stress tests: Big number of compactions and flushes: ./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 max_background_flushes=0, to verify that this case also works correctly ./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 Reviewers: ljin, rven, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D30123
2014-12-19 19:38:12 +00:00
while (!flush_queue_.empty()) {
auto cfd = PopFirstFromFlushQueue();
if (cfd->Unref()) {
delete cfd;
}
}
while (!compaction_queue_.empty()) {
auto cfd = PopFirstFromCompactionQueue();
if (cfd->Unref()) {
delete cfd;
}
}
if (default_cf_handle_ != nullptr) {
// we need to delete handle outside of lock because it does its own locking
mutex_.Unlock();
delete default_cf_handle_;
mutex_.Lock();
}
// Clean up obsolete files due to SuperVersion release.
// (1) Need to delete to obsolete files before closing because RepairDB()
// scans all existing files in the file system and builds manifest file.
// Keeping obsolete files confuses the repair process.
// (2) Need to check if we Open()/Recover() the DB successfully before
// deleting because if VersionSet recover fails (may be due to corrupted
// manifest file), it is not able to identify live files correctly. As a
// result, all "live" files can get deleted by accident. However, corrupted
// manifest is recoverable by RepairDB().
if (opened_successfully_) {
JobContext job_context(next_job_id_.fetch_add(1));
FindObsoleteFiles(&job_context, true);
mutex_.Unlock();
// manifest number starting from 2
job_context.manifest_file_number = 1;
if (job_context.HaveSomethingToDelete()) {
PurgeObsoleteFiles(job_context);
}
job_context.Clean();
mutex_.Lock();
}
for (auto l : logs_to_free_) {
delete l;
}
for (auto& log : logs_) {
log.ClearWriter();
}
logs_.clear();
// Table cache may have table handles holding blocks from the block cache.
// We need to release them before the block cache is destroyed. The block
// cache may be destroyed inside versions_.reset(), when column family data
// list is destroyed, so leaving handles in table cache after
// versions_.reset() may cause issues.
// Here we clean all unreferenced handles in table cache.
// Now we assume all user queries have finished, so only version set itself
// can possibly hold the blocks from block cache. After releasing unreferenced
// handles here, only handles held by version set left and inside
// versions_.reset(), we will release them. There, we need to make sure every
// time a handle is released, we erase it from the cache too. By doing that,
// we can guarantee that after versions_.reset(), table cache is empty
// so the cache can be safely destroyed.
table_cache_->EraseUnRefEntries();
for (auto& txn_entry : recovered_transactions_) {
delete txn_entry.second;
}
// versions need to be destroyed before table_cache since it can hold
// references to table_cache.
versions_.reset();
mutex_.Unlock();
if (db_lock_ != nullptr) {
env_->UnlockFile(db_lock_);
}
ROCKS_LOG_INFO(immutable_db_options_.info_log, "Shutdown complete");
LogFlush(immutable_db_options_.info_log);
Status s = Status::OK();
if (immutable_db_options_.info_log && own_info_log_) {
s = immutable_db_options_.info_log->Close();
}
return s;
}
DBImpl::~DBImpl() { Close(); }
void DBImpl::MaybeIgnoreError(Status* s) const {
if (s->ok() || immutable_db_options_.paranoid_checks) {
// No change needed
} else {
ROCKS_LOG_WARN(immutable_db_options_.info_log, "Ignoring error %s",
s->ToString().c_str());
*s = Status::OK();
}
}
const Status DBImpl::CreateArchivalDirectory() {
if (immutable_db_options_.wal_ttl_seconds > 0 ||
immutable_db_options_.wal_size_limit_mb > 0) {
std::string archivalPath = ArchivalDirectory(immutable_db_options_.wal_dir);
return env_->CreateDirIfMissing(archivalPath);
}
return Status::OK();
}
void DBImpl::PrintStatistics() {
auto dbstats = immutable_db_options_.statistics.get();
if (dbstats) {
ROCKS_LOG_WARN(immutable_db_options_.info_log, "STATISTICS:\n %s",
dbstats->ToString().c_str());
}
}
void DBImpl::MaybeDumpStats() {
mutex_.Lock();
unsigned int stats_dump_period_sec =
mutable_db_options_.stats_dump_period_sec;
mutex_.Unlock();
if (stats_dump_period_sec == 0) return;
const uint64_t now_micros = env_->NowMicros();
if (last_stats_dump_time_microsec_ + stats_dump_period_sec * 1000000 <=
now_micros) {
// Multiple threads could race in here simultaneously.
// However, the last one will update last_stats_dump_time_microsec_
// atomically. We could see more than one dump during one dump
// period in rare cases.
last_stats_dump_time_microsec_ = now_micros;
make internal stats independent of statistics Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
2014-07-21 19:57:29 +00:00
#ifndef ROCKSDB_LITE
const DBPropertyInfo* cf_property_info =
GetPropertyInfo(DB::Properties::kCFStats);
assert(cf_property_info != nullptr);
const DBPropertyInfo* db_property_info =
GetPropertyInfo(DB::Properties::kDBStats);
assert(db_property_info != nullptr);
std::string stats;
make internal stats independent of statistics Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
2014-07-21 19:57:29 +00:00
{
InstrumentedMutexLock l(&mutex_);
default_cf_internal_stats_->GetStringProperty(
*db_property_info, DB::Properties::kDBStats, &stats);
make internal stats independent of statistics Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
2014-07-21 19:57:29 +00:00
for (auto cfd : *versions_->GetColumnFamilySet()) {
if (cfd->initialized()) {
cfd->internal_stats()->GetStringProperty(
*cf_property_info, DB::Properties::kCFStatsNoFileHistogram,
&stats);
}
}
for (auto cfd : *versions_->GetColumnFamilySet()) {
if (cfd->initialized()) {
cfd->internal_stats()->GetStringProperty(
*cf_property_info, DB::Properties::kCFFileHistogram, &stats);
}
make internal stats independent of statistics Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
2014-07-21 19:57:29 +00:00
}
}
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"------- DUMPING STATS -------");
ROCKS_LOG_WARN(immutable_db_options_.info_log, "%s", stats.c_str());
if (immutable_db_options_.dump_malloc_stats) {
stats.clear();
DumpMallocStats(&stats);
if (!stats.empty()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"------- Malloc STATS -------");
ROCKS_LOG_WARN(immutable_db_options_.info_log, "%s", stats.c_str());
}
}
#endif // !ROCKSDB_LITE
make internal stats independent of statistics Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
2014-07-21 19:57:29 +00:00
PrintStatistics();
}
}
void DBImpl::ScheduleBgLogWriterClose(JobContext* job_context) {
if (!job_context->logs_to_free.empty()) {
for (auto l : job_context->logs_to_free) {
AddToLogsToFreeQueue(l);
}
job_context->logs_to_free.clear();
SchedulePurge();
}
}
Directory* DBImpl::Directories::GetDataDir(size_t path_id) {
assert(path_id < data_dirs_.size());
Directory* ret_dir = data_dirs_[path_id].get();
if (ret_dir == nullptr) {
// Should use db_dir_
return db_dir_.get();
}
return ret_dir;
}
Status DBImpl::SetOptions(ColumnFamilyHandle* column_family,
const std::unordered_map<std::string, std::string>& options_map) {
#ifdef ROCKSDB_LITE
return Status::NotSupported("Not supported in ROCKSDB LITE");
#else
auto* cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
if (options_map.empty()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"SetOptions() on column family [%s], empty input",
cfd->GetName().c_str());
return Status::InvalidArgument("empty input");
}
MutableCFOptions new_options;
Status s;
Status persist_options_status;
WriteThread::Writer w;
SuperVersionContext sv_context(/* create_superversion */ true);
{
InstrumentedMutexLock l(&mutex_);
s = cfd->SetOptions(options_map);
if (s.ok()) {
new_options = *cfd->GetLatestMutableCFOptions();
// Append new version to recompute compaction score.
VersionEdit dummy_edit;
versions_->LogAndApply(cfd, new_options, &dummy_edit, &mutex_,
directories_.GetDbDir());
// Trigger possible flush/compactions. This has to be before we persist
// options to file, otherwise there will be a deadlock with writer
// thread.
InstallSuperVersionAndScheduleWork(cfd, &sv_context, new_options);
persist_options_status = WriteOptionsFile(
false /*need_mutex_lock*/, true /*need_enter_write_thread*/);
}
}
sv_context.Clean();
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"SetOptions() on column family [%s], inputs:",
cfd->GetName().c_str());
for (const auto& o : options_map) {
ROCKS_LOG_INFO(immutable_db_options_.info_log, "%s: %s\n", o.first.c_str(),
o.second.c_str());
}
if (s.ok()) {
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"[%s] SetOptions() succeeded", cfd->GetName().c_str());
new_options.Dump(immutable_db_options_.info_log.get());
if (!persist_options_status.ok()) {
s = persist_options_status;
}
} else {
ROCKS_LOG_WARN(immutable_db_options_.info_log, "[%s] SetOptions() failed",
cfd->GetName().c_str());
}
LogFlush(immutable_db_options_.info_log);
return s;
#endif // ROCKSDB_LITE
}
Status DBImpl::SetDBOptions(
const std::unordered_map<std::string, std::string>& options_map) {
#ifdef ROCKSDB_LITE
return Status::NotSupported("Not supported in ROCKSDB LITE");
#else
if (options_map.empty()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"SetDBOptions(), empty input.");
return Status::InvalidArgument("empty input");
}
MutableDBOptions new_options;
Status s;
Status persist_options_status;
bool wal_changed = false;
WriteThread::Writer w;
WriteContext write_context;
{
InstrumentedMutexLock l(&mutex_);
s = GetMutableDBOptionsFromStrings(mutable_db_options_, options_map,
&new_options);
if (s.ok()) {
if (new_options.max_background_compactions >
mutable_db_options_.max_background_compactions) {
env_->IncBackgroundThreadsIfNeeded(
new_options.max_background_compactions, Env::Priority::LOW);
MaybeScheduleFlushOrCompaction();
}
write_controller_.set_max_delayed_write_rate(new_options.delayed_write_rate);
table_cache_.get()->SetCapacity(new_options.max_open_files == -1
? TableCache::kInfiniteCapacity
: new_options.max_open_files - 10);
wal_changed = mutable_db_options_.wal_bytes_per_sync !=
new_options.wal_bytes_per_sync;
if (new_options.bytes_per_sync == 0) {
new_options.bytes_per_sync = 1024 * 1024;
}
mutable_db_options_ = new_options;
env_options_for_compaction_ = EnvOptions(
BuildDBOptions(immutable_db_options_, mutable_db_options_));
env_options_for_compaction_ = env_->OptimizeForCompactionTableWrite(
env_options_for_compaction_, immutable_db_options_);
versions_->ChangeEnvOptions(mutable_db_options_);
env_options_for_compaction_ = env_->OptimizeForCompactionTableRead(
env_options_for_compaction_, immutable_db_options_);
env_options_for_compaction_.compaction_readahead_size =
mutable_db_options_.compaction_readahead_size;
write_thread_.EnterUnbatched(&w, &mutex_);
if (total_log_size_ > GetMaxTotalWalSize() || wal_changed) {
Status purge_wal_status = SwitchWAL(&write_context);
if (!purge_wal_status.ok()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"Unable to purge WAL files in SetDBOptions() -- %s",
purge_wal_status.ToString().c_str());
}
}
persist_options_status = WriteOptionsFile(
false /*need_mutex_lock*/, false /*need_enter_write_thread*/);
write_thread_.ExitUnbatched(&w);
}
}
ROCKS_LOG_INFO(immutable_db_options_.info_log, "SetDBOptions(), inputs:");
for (const auto& o : options_map) {
ROCKS_LOG_INFO(immutable_db_options_.info_log, "%s: %s\n", o.first.c_str(),
o.second.c_str());
}
if (s.ok()) {
ROCKS_LOG_INFO(immutable_db_options_.info_log, "SetDBOptions() succeeded");
new_options.Dump(immutable_db_options_.info_log.get());
if (!persist_options_status.ok()) {
if (immutable_db_options_.fail_if_options_file_error) {
s = Status::IOError(
"SetDBOptions() succeeded, but unable to persist options",
persist_options_status.ToString());
}
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"Unable to persist options in SetDBOptions() -- %s",
persist_options_status.ToString().c_str());
}
} else {
ROCKS_LOG_WARN(immutable_db_options_.info_log, "SetDBOptions failed");
}
LogFlush(immutable_db_options_.info_log);
return s;
#endif // ROCKSDB_LITE
}
// return the same level if it cannot be moved
int DBImpl::FindMinimumEmptyLevelFitting(ColumnFamilyData* cfd,
const MutableCFOptions& mutable_cf_options, int level) {
mutex_.AssertHeld();
const auto* vstorage = cfd->current()->storage_info();
int minimum_level = level;
for (int i = level - 1; i > 0; --i) {
// stop if level i is not empty
if (vstorage->NumLevelFiles(i) > 0) break;
// stop if level i is too small (cannot fit the level files)
if (vstorage->MaxBytesForLevel(i) < vstorage->NumLevelBytes(level)) {
break;
}
minimum_level = i;
}
return minimum_level;
}
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
Status DBImpl::FlushWAL(bool sync) {
{
// We need to lock log_write_mutex_ since logs_ might change concurrently
InstrumentedMutexLock wl(&log_write_mutex_);
log::Writer* cur_log_writer = logs_.back().writer;
auto s = cur_log_writer->WriteBuffer();
if (!s.ok()) {
ROCKS_LOG_ERROR(immutable_db_options_.info_log, "WAL flush error %s",
s.ToString().c_str());
}
if (!sync) {
ROCKS_LOG_DEBUG(immutable_db_options_.info_log, "FlushWAL sync=false");
return s;
}
}
// sync = true
ROCKS_LOG_DEBUG(immutable_db_options_.info_log, "FlushWAL sync=true");
return SyncWAL();
}
Status DBImpl::SyncWAL() {
autovector<log::Writer*, 1> logs_to_sync;
bool need_log_dir_sync;
uint64_t current_log_number;
{
InstrumentedMutexLock l(&mutex_);
assert(!logs_.empty());
// This SyncWAL() call only cares about logs up to this number.
current_log_number = logfile_number_;
while (logs_.front().number <= current_log_number &&
logs_.front().getting_synced) {
log_sync_cv_.Wait();
}
// First check that logs are safe to sync in background.
for (auto it = logs_.begin();
it != logs_.end() && it->number <= current_log_number; ++it) {
if (!it->writer->file()->writable_file()->IsSyncThreadSafe()) {
return Status::NotSupported(
"SyncWAL() is not supported for this implementation of WAL file",
immutable_db_options_.allow_mmap_writes
? "try setting Options::allow_mmap_writes to false"
: Slice());
}
}
for (auto it = logs_.begin();
it != logs_.end() && it->number <= current_log_number; ++it) {
auto& log = *it;
assert(!log.getting_synced);
log.getting_synced = true;
logs_to_sync.push_back(log.writer);
}
Rewritten system for scheduling background work Summary: When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue. The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction. Here are the performance results: Command: ./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333 Before the patch: fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s After the patch: fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got: fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s Test Plan: make check two stress tests: Big number of compactions and flushes: ./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 max_background_flushes=0, to verify that this case also works correctly ./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 Reviewers: ljin, rven, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D30123
2014-12-19 19:38:12 +00:00
need_log_dir_sync = !log_dir_synced_;
Rewritten system for scheduling background work Summary: When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue. The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction. Here are the performance results: Command: ./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333 Before the patch: fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s After the patch: fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got: fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s Test Plan: make check two stress tests: Big number of compactions and flushes: ./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 max_background_flushes=0, to verify that this case also works correctly ./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000 Reviewers: ljin, rven, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D30123
2014-12-19 19:38:12 +00:00
}
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
TEST_SYNC_POINT("DBWALTest::SyncWALNotWaitWrite:1");
RecordTick(stats_, WAL_FILE_SYNCED);
Status status;
for (log::Writer* log : logs_to_sync) {
status = log->file()->SyncWithoutFlush(immutable_db_options_.use_fsync);
if (!status.ok()) {
break;
}
}
if (status.ok() && need_log_dir_sync) {
status = directories_.GetWalDir()->Fsync();
}
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
TEST_SYNC_POINT("DBWALTest::SyncWALNotWaitWrite:2");
TEST_SYNC_POINT("DBImpl::SyncWAL:BeforeMarkLogsSynced:1");
{
InstrumentedMutexLock l(&mutex_);
MarkLogsSynced(current_log_number, need_log_dir_sync, status);
}
TEST_SYNC_POINT("DBImpl::SyncWAL:BeforeMarkLogsSynced:2");
return status;
}
void DBImpl::MarkLogsSynced(
uint64_t up_to, bool synced_dir, const Status& status) {
mutex_.AssertHeld();
if (synced_dir &&
logfile_number_ == up_to &&
status.ok()) {
log_dir_synced_ = true;
}
for (auto it = logs_.begin(); it != logs_.end() && it->number <= up_to;) {
auto& log = *it;
assert(log.getting_synced);
if (status.ok() && logs_.size() > 1) {
logs_to_free_.push_back(log.ReleaseWriter());
it = logs_.erase(it);
} else {
log.getting_synced = false;
++it;
}
}
assert(!status.ok() || logs_.empty() || logs_[0].number > up_to ||
(logs_.size() == 1 && !logs_[0].getting_synced));
log_sync_cv_.SignalAll();
}
SequenceNumber DBImpl::GetLatestSequenceNumber() const {
return versions_->LastSequence();
}
void DBImpl::SetLastPublishedSequence(SequenceNumber seq) {
versions_->SetLastPublishedSequence(seq);
}
Added support for differential snapshots Summary: The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2). This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages. From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff". This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR. For now, what's done here according to initial discussions: Preserving deletes: - We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion. - I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum. - Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum. Iterator changes: - couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum. TableCache changes: - I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span. What's left: - Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type. Closes https://github.com/facebook/rocksdb/pull/2999 Differential Revision: D6175602 Pulled By: mikhail-antonov fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
2017-11-02 01:43:29 +00:00
bool DBImpl::SetPreserveDeletesSequenceNumber(SequenceNumber seqnum) {
if (seqnum > preserve_deletes_seqnum_.load()) {
preserve_deletes_seqnum_.store(seqnum);
return true;
} else {
return false;
}
}
InternalIterator* DBImpl::NewInternalIterator(
Arena* arena, RangeDelAggregator* range_del_agg,
ColumnFamilyHandle* column_family) {
ColumnFamilyData* cfd;
if (column_family == nullptr) {
cfd = default_cf_handle_->cfd();
} else {
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
cfd = cfh->cfd();
}
mutex_.Lock();
SuperVersion* super_version = cfd->GetSuperVersion()->Ref();
mutex_.Unlock();
ReadOptions roptions;
return NewInternalIterator(roptions, cfd, super_version, arena,
range_del_agg);
}
void DBImpl::SchedulePurge() {
mutex_.AssertHeld();
assert(opened_successfully_);
// Purge operations are put into High priority queue
bg_purge_scheduled_++;
env_->Schedule(&DBImpl::BGWorkPurge, this, Env::Priority::HIGH, nullptr);
}
void DBImpl::BackgroundCallPurge() {
mutex_.Lock();
// We use one single loop to clear both queues so that after existing the loop
// both queues are empty. This is stricter than what is needed, but can make
// it easier for us to reason the correctness.
while (!purge_queue_.empty() || !logs_to_free_queue_.empty()) {
if (!purge_queue_.empty()) {
auto purge_file = purge_queue_.begin();
auto fname = purge_file->fname;
auto type = purge_file->type;
auto number = purge_file->number;
auto path_id = purge_file->path_id;
auto job_id = purge_file->job_id;
purge_queue_.pop_front();
mutex_.Unlock();
DeleteObsoleteFileImpl(job_id, fname, type, number, path_id);
mutex_.Lock();
} else {
assert(!logs_to_free_queue_.empty());
log::Writer* log_writer = *(logs_to_free_queue_.begin());
logs_to_free_queue_.pop_front();
mutex_.Unlock();
delete log_writer;
mutex_.Lock();
}
}
bg_purge_scheduled_--;
bg_cv_.SignalAll();
// IMPORTANT:there should be no code after calling SignalAll. This call may
// signal the DB destructor that it's OK to proceed with destruction. In
// that case, all DB variables will be dealloacated and referencing them
// will cause trouble.
mutex_.Unlock();
}
namespace {
struct IterState {
IterState(DBImpl* _db, InstrumentedMutex* _mu, SuperVersion* _super_version,
bool _background_purge)
: db(_db),
mu(_mu),
super_version(_super_version),
background_purge(_background_purge) {}
DBImpl* db;
InstrumentedMutex* mu;
SuperVersion* super_version;
bool background_purge;
};
static void CleanupIteratorState(void* arg1, void* arg2) {
IterState* state = reinterpret_cast<IterState*>(arg1);
if (state->super_version->Unref()) {
// Job id == 0 means that this is not our background process, but rather
// user thread
JobContext job_context(0);
state->mu->Lock();
state->super_version->Cleanup();
state->db->FindObsoleteFiles(&job_context, false, true);
if (state->background_purge) {
state->db->ScheduleBgLogWriterClose(&job_context);
}
state->mu->Unlock();
delete state->super_version;
if (job_context.HaveSomethingToDelete()) {
if (state->background_purge) {
// PurgeObsoleteFiles here does not delete files. Instead, it adds the
// files to be deleted to a job queue, and deletes it in a separate
// background thread.
state->db->PurgeObsoleteFiles(job_context, true /* schedule only */);
state->mu->Lock();
state->db->SchedulePurge();
state->mu->Unlock();
} else {
state->db->PurgeObsoleteFiles(job_context);
}
}
job_context.Clean();
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
}
delete state;
}
} // namespace
InternalIterator* DBImpl::NewInternalIterator(
const ReadOptions& read_options, ColumnFamilyData* cfd,
SuperVersion* super_version, Arena* arena,
RangeDelAggregator* range_del_agg) {
InternalIterator* internal_iter;
assert(arena != nullptr);
assert(range_del_agg != nullptr);
// Need to create internal iterator from the arena.
MergeIteratorBuilder merge_iter_builder(
&cfd->internal_comparator(), arena,
!read_options.total_order_seek &&
cfd->ioptions()->prefix_extractor != nullptr);
// Collect iterator for mutable mem
merge_iter_builder.AddIterator(
super_version->mem->NewIterator(read_options, arena));
std::unique_ptr<InternalIterator> range_del_iter;
Status s;
if (!read_options.ignore_range_deletions) {
range_del_iter.reset(
super_version->mem->NewRangeTombstoneIterator(read_options));
s = range_del_agg->AddTombstones(std::move(range_del_iter));
}
// Collect all needed child iterators for immutable memtables
if (s.ok()) {
super_version->imm->AddIterators(read_options, &merge_iter_builder);
if (!read_options.ignore_range_deletions) {
s = super_version->imm->AddRangeTombstoneIterators(read_options, arena,
range_del_agg);
}
}
TEST_SYNC_POINT_CALLBACK("DBImpl::NewInternalIterator:StatusCallback", &s);
if (s.ok()) {
// Collect iterators for files in L0 - Ln
if (read_options.read_tier != kMemtableTier) {
super_version->current->AddIterators(read_options, env_options_,
&merge_iter_builder, range_del_agg);
}
internal_iter = merge_iter_builder.Finish();
IterState* cleanup =
new IterState(this, &mutex_, super_version,
read_options.background_purge_on_iterator_cleanup);
internal_iter->RegisterCleanup(CleanupIteratorState, cleanup, nullptr);
return internal_iter;
} else {
CleanupSuperVersion(super_version);
}
return NewErrorInternalIterator(s, arena);
}
ColumnFamilyHandle* DBImpl::DefaultColumnFamily() const {
return default_cf_handle_;
}
Status DBImpl::Get(const ReadOptions& read_options,
ColumnFamilyHandle* column_family, const Slice& key,
PinnableSlice* value) {
return GetImpl(read_options, column_family, key, value);
}
Status DBImpl::GetImpl(const ReadOptions& read_options,
ColumnFamilyHandle* column_family, const Slice& key,
PinnableSlice* pinnable_val, bool* value_found,
ReadCallback* callback, bool* is_blob_index) {
assert(pinnable_val != nullptr);
StopWatch sw(env_, stats_, DB_GET);
PERF_TIMER_GUARD(get_snapshot_time);
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
// Acquire SuperVersion
SuperVersion* sv = GetAndRefSuperVersion(cfd);
TEST_SYNC_POINT("DBImpl::GetImpl:1");
TEST_SYNC_POINT("DBImpl::GetImpl:2");
SequenceNumber snapshot;
if (read_options.snapshot != nullptr) {
// Note: In WritePrepared txns this is not necessary but not harmful either.
// Because prep_seq > snapshot => commit_seq > snapshot so if a snapshot is
// specified we should be fine with skipping seq numbers that are greater
// than that.
snapshot = reinterpret_cast<const SnapshotImpl*>(
read_options.snapshot)->number_;
} else {
// Since we get and reference the super version before getting
// the snapshot number, without a mutex protection, it is possible
// that a memtable switch happened in the middle and not all the
// data for this snapshot is available. But it will contain all
// the data available in the super version we have, which is also
// a valid snapshot to read from.
// We shouldn't get snapshot before finding and referencing the
// super versipon because a flush happening in between may compact
// away data for the snapshot, but the snapshot is earlier than the
// data overwriting it, so users may see wrong results.
snapshot = last_seq_same_as_publish_seq_
? versions_->LastSequence()
: versions_->LastPublishedSequence();
}
TEST_SYNC_POINT("DBImpl::GetImpl:3");
TEST_SYNC_POINT("DBImpl::GetImpl:4");
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
// Prepare to store a list of merge operations if merge occurs.
MergeContext merge_context;
RangeDelAggregator range_del_agg(cfd->internal_comparator(), snapshot);
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
Status s;
// First look in the memtable, then in the immutable memtable (if any).
// s is both in/out. When in, s could either be OK or MergeInProgress.
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
// merge_operands will contain the sequence of merges in the latter case.
LookupKey lkey(key, snapshot);
PERF_TIMER_STOP(get_snapshot_time);
bool skip_memtable = (read_options.read_tier == kPersistedTier &&
has_unpersisted_data_.load(std::memory_order_relaxed));
bool done = false;
if (!skip_memtable) {
if (sv->mem->Get(lkey, pinnable_val->GetSelf(), &s, &merge_context,
&range_del_agg, read_options, callback, is_blob_index)) {
done = true;
pinnable_val->PinSelf();
RecordTick(stats_, MEMTABLE_HIT);
} else if ((s.ok() || s.IsMergeInProgress()) &&
sv->imm->Get(lkey, pinnable_val->GetSelf(), &s, &merge_context,
&range_del_agg, read_options, callback,
is_blob_index)) {
done = true;
pinnable_val->PinSelf();
RecordTick(stats_, MEMTABLE_HIT);
}
if (!done && !s.ok() && !s.IsMergeInProgress()) {
ReturnAndCleanupSuperVersion(cfd, sv);
return s;
}
}
if (!done) {
PERF_TIMER_GUARD(get_from_output_files_time);
sv->current->Get(read_options, lkey, pinnable_val, &s, &merge_context,
&range_del_agg, value_found, nullptr, nullptr, callback,
is_blob_index);
RecordTick(stats_, MEMTABLE_MISS);
}
{
PERF_TIMER_GUARD(get_post_process_time);
ReturnAndCleanupSuperVersion(cfd, sv);
RecordTick(stats_, NUMBER_KEYS_READ);
size_t size = pinnable_val->size();
RecordTick(stats_, BYTES_READ, size);
MeasureTime(stats_, BYTES_PER_READ, size);
PERF_COUNTER_ADD(get_read_bytes, size);
}
return s;
}
std::vector<Status> DBImpl::MultiGet(
const ReadOptions& read_options,
const std::vector<ColumnFamilyHandle*>& column_family,
const std::vector<Slice>& keys, std::vector<std::string>* values) {
StopWatch sw(env_, stats_, DB_MULTIGET);
PERF_TIMER_GUARD(get_snapshot_time);
2013-11-27 19:47:40 +00:00
SequenceNumber snapshot;
struct MultiGetColumnFamilyData {
ColumnFamilyData* cfd;
SuperVersion* super_version;
};
std::unordered_map<uint32_t, MultiGetColumnFamilyData*> multiget_cf_data;
// fill up and allocate outside of mutex
for (auto cf : column_family) {
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(cf);
auto cfd = cfh->cfd();
if (multiget_cf_data.find(cfd->GetID()) == multiget_cf_data.end()) {
auto mgcfd = new MultiGetColumnFamilyData();
mgcfd->cfd = cfd;
multiget_cf_data.insert({cfd->GetID(), mgcfd});
}
}
mutex_.Lock();
if (read_options.snapshot != nullptr) {
snapshot = reinterpret_cast<const SnapshotImpl*>(
read_options.snapshot)->number_;
} else {
snapshot = last_seq_same_as_publish_seq_
? versions_->LastSequence()
: versions_->LastPublishedSequence();
}
for (auto mgd_iter : multiget_cf_data) {
mgd_iter.second->super_version =
mgd_iter.second->cfd->GetSuperVersion()->Ref();
}
mutex_.Unlock();
// Contain a list of merge operations if merge occurs.
MergeContext merge_context;
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
// Note: this always resizes the values array
size_t num_keys = keys.size();
std::vector<Status> stat_list(num_keys);
values->resize(num_keys);
// Keep track of bytes that we read for statistics-recording later
uint64_t bytes_read = 0;
PERF_TIMER_STOP(get_snapshot_time);
// For each of the given keys, apply the entire "get" process as follows:
// First look in the memtable, then in the immutable memtable (if any).
// s is both in/out. When in, s could either be OK or MergeInProgress.
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
// merge_operands will contain the sequence of merges in the latter case.
for (size_t i = 0; i < num_keys; ++i) {
merge_context.Clear();
Status& s = stat_list[i];
std::string* value = &(*values)[i];
LookupKey lkey(keys[i], snapshot);
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family[i]);
RangeDelAggregator range_del_agg(cfh->cfd()->internal_comparator(),
snapshot);
auto mgd_iter = multiget_cf_data.find(cfh->cfd()->GetID());
assert(mgd_iter != multiget_cf_data.end());
auto mgd = mgd_iter->second;
auto super_version = mgd->super_version;
bool skip_memtable =
(read_options.read_tier == kPersistedTier &&
has_unpersisted_data_.load(std::memory_order_relaxed));
bool done = false;
if (!skip_memtable) {
if (super_version->mem->Get(lkey, value, &s, &merge_context,
&range_del_agg, read_options)) {
done = true;
// TODO(?): RecordTick(stats_, MEMTABLE_HIT)?
} else if (super_version->imm->Get(lkey, value, &s, &merge_context,
&range_del_agg, read_options)) {
done = true;
// TODO(?): RecordTick(stats_, MEMTABLE_HIT)?
}
}
if (!done) {
PinnableSlice pinnable_val;
PERF_TIMER_GUARD(get_from_output_files_time);
super_version->current->Get(read_options, lkey, &pinnable_val, &s,
&merge_context, &range_del_agg);
value->assign(pinnable_val.data(), pinnable_val.size());
// TODO(?): RecordTick(stats_, MEMTABLE_MISS)?
}
if (s.ok()) {
bytes_read += value->size();
}
}
// Post processing (decrement reference counts and record statistics)
PERF_TIMER_GUARD(get_post_process_time);
autovector<SuperVersion*> superversions_to_delete;
// TODO(icanadi) do we need lock here or just around Cleanup()?
mutex_.Lock();
for (auto mgd_iter : multiget_cf_data) {
auto mgd = mgd_iter.second;
if (mgd->super_version->Unref()) {
mgd->super_version->Cleanup();
superversions_to_delete.push_back(mgd->super_version);
}
}
mutex_.Unlock();
for (auto td : superversions_to_delete) {
delete td;
}
for (auto mgd : multiget_cf_data) {
delete mgd.second;
}
RecordTick(stats_, NUMBER_MULTIGET_CALLS);
RecordTick(stats_, NUMBER_MULTIGET_KEYS_READ, num_keys);
RecordTick(stats_, NUMBER_MULTIGET_BYTES_READ, bytes_read);
MeasureTime(stats_, BYTES_PER_MULTIGET, bytes_read);
PERF_COUNTER_ADD(multiget_read_bytes, bytes_read);
PERF_TIMER_STOP(get_post_process_time);
return stat_list;
}
Status DBImpl::CreateColumnFamily(const ColumnFamilyOptions& cf_options,
const std::string& column_family,
ColumnFamilyHandle** handle) {
assert(handle != nullptr);
Status s = CreateColumnFamilyImpl(cf_options, column_family, handle);
if (s.ok()) {
s = WriteOptionsFile(true /*need_mutex_lock*/,
true /*need_enter_write_thread*/);
}
return s;
}
Status DBImpl::CreateColumnFamilies(
const ColumnFamilyOptions& cf_options,
const std::vector<std::string>& column_family_names,
std::vector<ColumnFamilyHandle*>* handles) {
assert(handles != nullptr);
handles->clear();
size_t num_cf = column_family_names.size();
Status s;
bool success_once = false;
for (size_t i = 0; i < num_cf; i++) {
ColumnFamilyHandle* handle;
s = CreateColumnFamilyImpl(cf_options, column_family_names[i], &handle);
if (!s.ok()) {
break;
}
handles->push_back(handle);
success_once = true;
}
if (success_once) {
Status persist_options_status = WriteOptionsFile(
true /*need_mutex_lock*/, true /*need_enter_write_thread*/);
if (s.ok() && !persist_options_status.ok()) {
s = persist_options_status;
}
}
return s;
}
Status DBImpl::CreateColumnFamilies(
const std::vector<ColumnFamilyDescriptor>& column_families,
std::vector<ColumnFamilyHandle*>* handles) {
assert(handles != nullptr);
handles->clear();
size_t num_cf = column_families.size();
Status s;
bool success_once = false;
for (size_t i = 0; i < num_cf; i++) {
ColumnFamilyHandle* handle;
s = CreateColumnFamilyImpl(column_families[i].options,
column_families[i].name, &handle);
if (!s.ok()) {
break;
}
handles->push_back(handle);
success_once = true;
}
if (success_once) {
Status persist_options_status = WriteOptionsFile(
true /*need_mutex_lock*/, true /*need_enter_write_thread*/);
if (s.ok() && !persist_options_status.ok()) {
s = persist_options_status;
}
}
return s;
}
Status DBImpl::CreateColumnFamilyImpl(const ColumnFamilyOptions& cf_options,
const std::string& column_family_name,
ColumnFamilyHandle** handle) {
Status s;
Status persist_options_status;
*handle = nullptr;
s = CheckCompressionSupported(cf_options);
if (s.ok() && immutable_db_options_.allow_concurrent_memtable_write) {
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
s = CheckConcurrentWritesSupported(cf_options);
}
if (!s.ok()) {
return s;
}
SuperVersionContext sv_context(/* create_superversion */ true);
{
InstrumentedMutexLock l(&mutex_);
if (versions_->GetColumnFamilySet()->GetColumnFamily(column_family_name) !=
nullptr) {
return Status::InvalidArgument("Column family already exists");
}
VersionEdit edit;
edit.AddColumnFamily(column_family_name);
uint32_t new_id = versions_->GetColumnFamilySet()->GetNextColumnFamilyID();
edit.SetColumnFamily(new_id);
edit.SetLogNumber(logfile_number_);
edit.SetComparatorName(cf_options.comparator->Name());
// LogAndApply will both write the creation in MANIFEST and create
// ColumnFamilyData object
2015-01-06 20:44:21 +00:00
{ // write thread
WriteThread::Writer w;
write_thread_.EnterUnbatched(&w, &mutex_);
2015-01-06 20:44:21 +00:00
// LogAndApply will both write the creation in MANIFEST and create
// ColumnFamilyData object
s = versions_->LogAndApply(nullptr, MutableCFOptions(cf_options), &edit,
&mutex_, directories_.GetDbDir(), false,
&cf_options);
write_thread_.ExitUnbatched(&w);
2015-01-06 20:44:21 +00:00
}
if (s.ok()) {
single_column_family_mode_ = false;
auto* cfd =
versions_->GetColumnFamilySet()->GetColumnFamily(column_family_name);
assert(cfd != nullptr);
InstallSuperVersionAndScheduleWork(
cfd, &sv_context, *cfd->GetLatestMutableCFOptions());
if (!cfd->mem()->IsSnapshotSupported()) {
is_snapshot_supported_ = false;
}
cfd->set_initialized();
*handle = new ColumnFamilyHandleImpl(cfd, this, &mutex_);
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"Created column family [%s] (ID %u)",
column_family_name.c_str(), (unsigned)cfd->GetID());
} else {
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"Creating column family [%s] FAILED -- %s",
column_family_name.c_str(), s.ToString().c_str());
}
} // InstrumentedMutexLock l(&mutex_)
sv_context.Clean();
// this is outside the mutex
if (s.ok()) {
NewThreadStatusCfInfo(
reinterpret_cast<ColumnFamilyHandleImpl*>(*handle)->cfd());
}
return s;
}
Status DBImpl::DropColumnFamily(ColumnFamilyHandle* column_family) {
assert(column_family != nullptr);
Status s = DropColumnFamilyImpl(column_family);
if (s.ok()) {
s = WriteOptionsFile(true /*need_mutex_lock*/,
true /*need_enter_write_thread*/);
}
return s;
}
Status DBImpl::DropColumnFamilies(
const std::vector<ColumnFamilyHandle*>& column_families) {
Status s;
bool success_once = false;
for (auto* handle : column_families) {
s = DropColumnFamilyImpl(handle);
if (!s.ok()) {
break;
}
success_once = true;
}
if (success_once) {
Status persist_options_status = WriteOptionsFile(
true /*need_mutex_lock*/, true /*need_enter_write_thread*/);
if (s.ok() && !persist_options_status.ok()) {
s = persist_options_status;
}
}
return s;
}
Status DBImpl::DropColumnFamilyImpl(ColumnFamilyHandle* column_family) {
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
if (cfd->GetID() == 0) {
return Status::InvalidArgument("Can't drop default column family");
}
bool cf_support_snapshot = cfd->mem()->IsSnapshotSupported();
VersionEdit edit;
edit.DropColumnFamily();
edit.SetColumnFamily(cfd->GetID());
Status s;
{
InstrumentedMutexLock l(&mutex_);
if (cfd->IsDropped()) {
s = Status::InvalidArgument("Column family already dropped!\n");
}
if (s.ok()) {
// we drop column family from a single write thread
WriteThread::Writer w;
write_thread_.EnterUnbatched(&w, &mutex_);
s = versions_->LogAndApply(cfd, *cfd->GetLatestMutableCFOptions(),
&edit, &mutex_);
write_thread_.ExitUnbatched(&w);
}
if (s.ok()) {
auto* mutable_cf_options = cfd->GetLatestMutableCFOptions();
max_total_in_memory_state_ -= mutable_cf_options->write_buffer_size *
mutable_cf_options->max_write_buffer_number;
}
if (!cf_support_snapshot) {
// Dropped Column Family doesn't support snapshot. Need to recalculate
// is_snapshot_supported_.
bool new_is_snapshot_supported = true;
for (auto c : *versions_->GetColumnFamilySet()) {
if (!c->IsDropped() && !c->mem()->IsSnapshotSupported()) {
new_is_snapshot_supported = false;
break;
}
}
is_snapshot_supported_ = new_is_snapshot_supported;
}
}
if (s.ok()) {
// Note that here we erase the associated cf_info of the to-be-dropped
// cfd before its ref-count goes to zero to avoid having to erase cf_info
// later inside db_mutex.
EraseThreadStatusCfInfo(cfd);
assert(cfd->IsDropped());
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"Dropped column family with id %u\n", cfd->GetID());
} else {
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"Dropping column family with id %u FAILED -- %s\n",
cfd->GetID(), s.ToString().c_str());
}
return s;
}
bool DBImpl::KeyMayExist(const ReadOptions& read_options,
ColumnFamilyHandle* column_family, const Slice& key,
std::string* value, bool* value_found) {
assert(value != nullptr);
if (value_found != nullptr) {
// falsify later if key-may-exist but can't fetch value
*value_found = true;
}
ReadOptions roptions = read_options;
roptions.read_tier = kBlockCacheTier; // read from block cache only
PinnableSlice pinnable_val;
auto s = GetImpl(roptions, column_family, key, &pinnable_val, value_found);
value->assign(pinnable_val.data(), pinnable_val.size());
// If block_cache is enabled and the index block of the table didn't
// not present in block_cache, the return value will be Status::Incomplete.
// In this case, key may still exist in the table.
return s.ok() || s.IsIncomplete();
}
Iterator* DBImpl::NewIterator(const ReadOptions& read_options,
ColumnFamilyHandle* column_family) {
Iterator* result = nullptr;
if (read_options.read_tier == kPersistedTier) {
return NewErrorIterator(Status::NotSupported(
"ReadTier::kPersistedData is not yet supported in iterators."));
}
Added support for differential snapshots Summary: The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2). This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages. From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff". This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR. For now, what's done here according to initial discussions: Preserving deletes: - We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion. - I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum. - Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum. Iterator changes: - couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum. TableCache changes: - I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span. What's left: - Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type. Closes https://github.com/facebook/rocksdb/pull/2999 Differential Revision: D6175602 Pulled By: mikhail-antonov fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
2017-11-02 01:43:29 +00:00
// if iterator wants internal keys, we can only proceed if
// we can guarantee the deletes haven't been processed yet
if (immutable_db_options_.preserve_deletes &&
read_options.iter_start_seqnum > 0 &&
read_options.iter_start_seqnum < preserve_deletes_seqnum_.load()) {
return NewErrorIterator(Status::InvalidArgument(
"Iterator requested internal keys which are too old and are not"
" guaranteed to be preserved, try larger iter_start_seqnum opt."));
}
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
ReadCallback* read_callback = nullptr; // No read callback provided.
if (read_options.managed) {
#ifdef ROCKSDB_LITE
// not supported in lite version
result = NewErrorIterator(Status::InvalidArgument(
"Managed Iterators not supported in RocksDBLite."));
#else
if ((read_options.tailing) || (read_options.snapshot != nullptr) ||
(is_snapshot_supported_)) {
result = new ManagedIterator(this, read_options, cfd);
} else {
// Managed iter not supported
result = NewErrorIterator(Status::InvalidArgument(
"Managed Iterators not supported without snapshots."));
}
#endif
} else if (read_options.tailing) {
#ifdef ROCKSDB_LITE
// not supported in lite version
result = nullptr;
#else
SuperVersion* sv = cfd->GetReferencedSuperVersion(&mutex_);
auto iter = new ForwardIterator(this, read_options, cfd, sv);
result = NewDBIterator(
env_, read_options, *cfd->ioptions(), cfd->user_comparator(), iter,
kMaxSequenceNumber,
sv->mutable_cf_options.max_sequential_skip_in_iterations,
read_callback);
#endif
} else {
// Note: no need to consider the special case of
// last_seq_same_as_publish_seq_==false since NewIterator is overridden in
// WritePreparedTxnDB
auto snapshot = read_options.snapshot != nullptr
? read_options.snapshot->GetSequenceNumber()
: versions_->LastSequence();
result = NewIteratorImpl(read_options, cfd, snapshot, read_callback);
}
return result;
}
ArenaWrappedDBIter* DBImpl::NewIteratorImpl(const ReadOptions& read_options,
ColumnFamilyData* cfd,
SequenceNumber snapshot,
ReadCallback* read_callback,
bool allow_blob,
bool allow_refresh) {
SuperVersion* sv = cfd->GetReferencedSuperVersion(&mutex_);
// Try to generate a DB iterator tree in continuous memory area to be
// cache friendly. Here is an example of result:
// +-------------------------------+
// | |
// | ArenaWrappedDBIter |
// | + |
// | +---> Inner Iterator ------------+
// | | | |
// | | +-- -- -- -- -- -- -- --+ |
// | +--- | Arena | |
// | | | |
// | Allocated Memory: | |
// | | +-------------------+ |
// | | | DBIter | <---+
// | | + |
// | | | +-> iter_ ------------+
// | | | | |
// | | +-------------------+ |
// | | | MergingIterator | <---+
// | | + |
// | | | +->child iter1 ------------+
// | | | | | |
// | | +->child iter2 ----------+ |
// | | | | | | |
// | | | +->child iter3 --------+ | |
// | | | | | |
// | | +-------------------+ | | |
// | | | Iterator1 | <--------+
// | | +-------------------+ | |
// | | | Iterator2 | <------+
// | | +-------------------+ |
// | | | Iterator3 | <----+
// | | +-------------------+
// | | |
// +-------+-----------------------+
//
// ArenaWrappedDBIter inlines an arena area where all the iterators in
// the iterator tree are allocated in the order of being accessed when
// querying.
// Laying out the iterators in the order of being accessed makes it more
// likely that any iterator pointer is close to the iterator it points to so
// that they are likely to be in the same cache line and/or page.
ArenaWrappedDBIter* db_iter = NewArenaWrappedDbIterator(
env_, read_options, *cfd->ioptions(), snapshot,
sv->mutable_cf_options.max_sequential_skip_in_iterations,
sv->version_number, read_callback,
((read_options.snapshot != nullptr) ? nullptr : this), cfd, allow_blob,
allow_refresh);
InternalIterator* internal_iter =
NewInternalIterator(read_options, cfd, sv, db_iter->GetArena(),
db_iter->GetRangeDelAggregator());
db_iter->SetIterUnderDBIter(internal_iter);
return db_iter;
}
Status DBImpl::NewIterators(
const ReadOptions& read_options,
const std::vector<ColumnFamilyHandle*>& column_families,
std::vector<Iterator*>* iterators) {
if (read_options.read_tier == kPersistedTier) {
return Status::NotSupported(
"ReadTier::kPersistedData is not yet supported in iterators.");
}
ReadCallback* read_callback = nullptr; // No read callback provided.
iterators->clear();
iterators->reserve(column_families.size());
if (read_options.managed) {
#ifdef ROCKSDB_LITE
return Status::InvalidArgument(
"Managed interator not supported in RocksDB lite");
#else
if ((!read_options.tailing) && (read_options.snapshot == nullptr) &&
(!is_snapshot_supported_)) {
return Status::InvalidArgument(
"Managed interator not supported without snapshots");
}
for (auto cfh : column_families) {
auto cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(cfh)->cfd();
auto iter = new ManagedIterator(this, read_options, cfd);
iterators->push_back(iter);
}
#endif
} else if (read_options.tailing) {
#ifdef ROCKSDB_LITE
return Status::InvalidArgument(
"Tailing interator not supported in RocksDB lite");
#else
for (auto cfh : column_families) {
auto cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(cfh)->cfd();
SuperVersion* sv = cfd->GetReferencedSuperVersion(&mutex_);
auto iter = new ForwardIterator(this, read_options, cfd, sv);
iterators->push_back(NewDBIterator(
env_, read_options, *cfd->ioptions(), cfd->user_comparator(), iter,
kMaxSequenceNumber,
sv->mutable_cf_options.max_sequential_skip_in_iterations,
read_callback));
}
#endif
} else {
// Note: no need to consider the special case of
// last_seq_same_as_publish_seq_==false since NewIterators is overridden in
// WritePreparedTxnDB
auto snapshot = read_options.snapshot != nullptr
? read_options.snapshot->GetSequenceNumber()
: versions_->LastSequence();
for (size_t i = 0; i < column_families.size(); ++i) {
auto* cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(
column_families[i])->cfd();
iterators->push_back(
NewIteratorImpl(read_options, cfd, snapshot, read_callback));
}
}
return Status::OK();
}
const Snapshot* DBImpl::GetSnapshot() { return GetSnapshotImpl(false); }
#ifndef ROCKSDB_LITE
const Snapshot* DBImpl::GetSnapshotForWriteConflictBoundary() {
return GetSnapshotImpl(true);
}
#endif // ROCKSDB_LITE
const Snapshot* DBImpl::GetSnapshotImpl(bool is_write_conflict_boundary) {
int64_t unix_time = 0;
env_->GetCurrentTime(&unix_time); // Ignore error
SnapshotImpl* s = new SnapshotImpl;
InstrumentedMutexLock l(&mutex_);
// returns null if the underlying memtable does not support snapshot.
if (!is_snapshot_supported_) {
delete s;
return nullptr;
}
auto snapshot_seq = last_seq_same_as_publish_seq_
? versions_->LastSequence()
: versions_->LastPublishedSequence();
return snapshots_.New(s, snapshot_seq, unix_time, is_write_conflict_boundary);
}
void DBImpl::ReleaseSnapshot(const Snapshot* s) {
const SnapshotImpl* casted_s = reinterpret_cast<const SnapshotImpl*>(s);
{
InstrumentedMutexLock l(&mutex_);
snapshots_.Delete(casted_s);
single-file bottom-level compaction when snapshot released Summary: When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys. - Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys. - Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases. - Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called. - Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction. Closes https://github.com/facebook/rocksdb/pull/3009 Differential Revision: D6062044 Pulled By: ajkr fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
2017-10-25 23:24:29 +00:00
uint64_t oldest_snapshot;
if (snapshots_.empty()) {
oldest_snapshot = last_seq_same_as_publish_seq_
? versions_->LastSequence()
: versions_->LastPublishedSequence();
single-file bottom-level compaction when snapshot released Summary: When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys. - Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys. - Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases. - Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called. - Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction. Closes https://github.com/facebook/rocksdb/pull/3009 Differential Revision: D6062044 Pulled By: ajkr fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
2017-10-25 23:24:29 +00:00
} else {
oldest_snapshot = snapshots_.oldest()->number_;
}
for (auto* cfd : *versions_->GetColumnFamilySet()) {
cfd->current()->storage_info()->UpdateOldestSnapshot(oldest_snapshot);
if (!cfd->current()
->storage_info()
->BottommostFilesMarkedForCompaction()
.empty()) {
SchedulePendingCompaction(cfd);
MaybeScheduleFlushOrCompaction();
}
}
}
delete casted_s;
}
#ifndef ROCKSDB_LITE
Status DBImpl::GetPropertiesOfAllTables(ColumnFamilyHandle* column_family,
TablePropertiesCollection* props) {
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
// Increment the ref count
mutex_.Lock();
auto version = cfd->current();
version->Ref();
mutex_.Unlock();
auto s = version->GetPropertiesOfAllTables(props);
// Decrement the ref count
mutex_.Lock();
version->Unref();
mutex_.Unlock();
return s;
}
Status DBImpl::GetPropertiesOfTablesInRange(ColumnFamilyHandle* column_family,
const Range* range, std::size_t n,
TablePropertiesCollection* props) {
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
// Increment the ref count
mutex_.Lock();
auto version = cfd->current();
version->Ref();
mutex_.Unlock();
auto s = version->GetPropertiesOfTablesInRange(range, n, props);
// Decrement the ref count
mutex_.Lock();
version->Unref();
mutex_.Unlock();
return s;
}
#endif // ROCKSDB_LITE
[RocksDB] BackupableDB Summary: In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you. Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes. There are multiple things you can configure: 1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like. 2. sync - if true, it *guarantees* backup consistency on machine reboot 3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files. 4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup. 5. More things you can find in BackupableDBOptions Here is the directory structure I use: backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot 0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files All the files are ref counted and deleted immediatelly when they get out of scope. Some other stuff in this diff: 1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do. 2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB. Test Plan: I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff. Also, `make asan_check` Reviewers: dhruba, haobo, emayanke Reviewed By: dhruba CC: leveldb, haobo Differential Revision: https://reviews.facebook.net/D14295
2013-12-09 22:06:52 +00:00
const std::string& DBImpl::GetName() const {
return dbname_;
}
Env* DBImpl::GetEnv() const {
return env_;
}
Options DBImpl::GetOptions(ColumnFamilyHandle* column_family) const {
InstrumentedMutexLock l(&mutex_);
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
return Options(BuildDBOptions(immutable_db_options_, mutable_db_options_),
cfh->cfd()->GetLatestCFOptions());
}
DBOptions DBImpl::GetDBOptions() const {
InstrumentedMutexLock l(&mutex_);
return BuildDBOptions(immutable_db_options_, mutable_db_options_);
}
bool DBImpl::GetProperty(ColumnFamilyHandle* column_family,
const Slice& property, std::string* value) {
const DBPropertyInfo* property_info = GetPropertyInfo(property);
value->clear();
auto cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
if (property_info == nullptr) {
return false;
} else if (property_info->handle_int) {
uint64_t int_value;
bool ret_value =
GetIntPropertyInternal(cfd, *property_info, false, &int_value);
if (ret_value) {
*value = ToString(int_value);
}
return ret_value;
} else if (property_info->handle_string) {
InstrumentedMutexLock l(&mutex_);
return cfd->internal_stats()->GetStringProperty(*property_info, property,
value);
}
// Shouldn't reach here since exactly one of handle_string and handle_int
// should be non-nullptr.
assert(false);
return false;
}
bool DBImpl::GetMapProperty(ColumnFamilyHandle* column_family,
const Slice& property,
std::map<std::string, std::string>* value) {
const DBPropertyInfo* property_info = GetPropertyInfo(property);
value->clear();
auto cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
if (property_info == nullptr) {
return false;
} else if (property_info->handle_map) {
InstrumentedMutexLock l(&mutex_);
return cfd->internal_stats()->GetMapProperty(*property_info, property,
value);
}
// If we reach this point it means that handle_map is not provided for the
// requested property
return false;
}
bool DBImpl::GetIntProperty(ColumnFamilyHandle* column_family,
const Slice& property, uint64_t* value) {
const DBPropertyInfo* property_info = GetPropertyInfo(property);
if (property_info == nullptr || property_info->handle_int == nullptr) {
return false;
}
auto cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
return GetIntPropertyInternal(cfd, *property_info, false, value);
}
bool DBImpl::GetIntPropertyInternal(ColumnFamilyData* cfd,
const DBPropertyInfo& property_info,
bool is_locked, uint64_t* value) {
assert(property_info.handle_int != nullptr);
if (!property_info.need_out_of_mutex) {
if (is_locked) {
mutex_.AssertHeld();
return cfd->internal_stats()->GetIntProperty(property_info, value, this);
} else {
InstrumentedMutexLock l(&mutex_);
return cfd->internal_stats()->GetIntProperty(property_info, value, this);
}
} else {
SuperVersion* sv = nullptr;
if (!is_locked) {
sv = GetAndRefSuperVersion(cfd);
} else {
sv = cfd->GetSuperVersion();
}
bool ret = cfd->internal_stats()->GetIntPropertyOutOfMutex(
property_info, sv->current, value);
if (!is_locked) {
ReturnAndCleanupSuperVersion(cfd, sv);
}
return ret;
}
}
#ifndef ROCKSDB_LITE
Status DBImpl::ResetStats() {
InstrumentedMutexLock l(&mutex_);
for (auto* cfd : *versions_->GetColumnFamilySet()) {
if (cfd->initialized()) {
cfd->internal_stats()->Clear();
}
}
return Status::OK();
}
#endif // ROCKSDB_LITE
bool DBImpl::GetAggregatedIntProperty(const Slice& property,
uint64_t* aggregated_value) {
const DBPropertyInfo* property_info = GetPropertyInfo(property);
if (property_info == nullptr || property_info->handle_int == nullptr) {
return false;
}
uint64_t sum = 0;
{
// Needs mutex to protect the list of column families.
InstrumentedMutexLock l(&mutex_);
uint64_t value;
for (auto* cfd : *versions_->GetColumnFamilySet()) {
if (!cfd->initialized()) {
continue;
}
if (GetIntPropertyInternal(cfd, *property_info, true, &value)) {
sum += value;
} else {
return false;
}
}
}
*aggregated_value = sum;
return true;
}
SuperVersion* DBImpl::GetAndRefSuperVersion(ColumnFamilyData* cfd) {
// TODO(ljin): consider using GetReferencedSuperVersion() directly
return cfd->GetThreadLocalSuperVersion(&mutex_);
}
// REQUIRED: this function should only be called on the write thread or if the
// mutex is held.
SuperVersion* DBImpl::GetAndRefSuperVersion(uint32_t column_family_id) {
auto column_family_set = versions_->GetColumnFamilySet();
auto cfd = column_family_set->GetColumnFamily(column_family_id);
if (!cfd) {
return nullptr;
}
return GetAndRefSuperVersion(cfd);
}
void DBImpl::CleanupSuperVersion(SuperVersion* sv) {
// Release SuperVersion
if (sv->Unref()) {
{
InstrumentedMutexLock l(&mutex_);
sv->Cleanup();
}
delete sv;
RecordTick(stats_, NUMBER_SUPERVERSION_CLEANUPS);
}
RecordTick(stats_, NUMBER_SUPERVERSION_RELEASES);
}
void DBImpl::ReturnAndCleanupSuperVersion(ColumnFamilyData* cfd,
SuperVersion* sv) {
if (!cfd->ReturnThreadLocalSuperVersion(sv)) {
CleanupSuperVersion(sv);
}
}
// REQUIRED: this function should only be called on the write thread.
void DBImpl::ReturnAndCleanupSuperVersion(uint32_t column_family_id,
SuperVersion* sv) {
auto column_family_set = versions_->GetColumnFamilySet();
auto cfd = column_family_set->GetColumnFamily(column_family_id);
// If SuperVersion is held, and we successfully fetched a cfd using
// GetAndRefSuperVersion(), it must still exist.
assert(cfd != nullptr);
ReturnAndCleanupSuperVersion(cfd, sv);
}
// REQUIRED: this function should only be called on the write thread or if the
// mutex is held.
ColumnFamilyHandle* DBImpl::GetColumnFamilyHandle(uint32_t column_family_id) {
ColumnFamilyMemTables* cf_memtables = column_family_memtables_.get();
if (!cf_memtables->Seek(column_family_id)) {
return nullptr;
}
return cf_memtables->GetColumnFamilyHandle();
}
// REQUIRED: mutex is NOT held.
ColumnFamilyHandle* DBImpl::GetColumnFamilyHandleUnlocked(
uint32_t column_family_id) {
ColumnFamilyMemTables* cf_memtables = column_family_memtables_.get();
InstrumentedMutexLock l(&mutex_);
if (!cf_memtables->Seek(column_family_id)) {
return nullptr;
}
return cf_memtables->GetColumnFamilyHandle();
}
void DBImpl::GetApproximateMemTableStats(ColumnFamilyHandle* column_family,
const Range& range,
uint64_t* const count,
uint64_t* const size) {
ColumnFamilyHandleImpl* cfh =
reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
ColumnFamilyData* cfd = cfh->cfd();
SuperVersion* sv = GetAndRefSuperVersion(cfd);
// Convert user_key into a corresponding internal key.
InternalKey k1(range.start, kMaxSequenceNumber, kValueTypeForSeek);
InternalKey k2(range.limit, kMaxSequenceNumber, kValueTypeForSeek);
MemTable::MemTableStats memStats =
sv->mem->ApproximateStats(k1.Encode(), k2.Encode());
MemTable::MemTableStats immStats =
sv->imm->ApproximateStats(k1.Encode(), k2.Encode());
*count = memStats.count + immStats.count;
*size = memStats.size + immStats.size;
ReturnAndCleanupSuperVersion(cfd, sv);
}
void DBImpl::GetApproximateSizes(ColumnFamilyHandle* column_family,
const Range* range, int n, uint64_t* sizes,
uint8_t include_flags) {
assert(include_flags & DB::SizeApproximationFlags::INCLUDE_FILES ||
include_flags & DB::SizeApproximationFlags::INCLUDE_MEMTABLES);
Version* v;
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
SuperVersion* sv = GetAndRefSuperVersion(cfd);
v = sv->current;
for (int i = 0; i < n; i++) {
// Convert user_key into a corresponding internal key.
InternalKey k1(range[i].start, kMaxSequenceNumber, kValueTypeForSeek);
InternalKey k2(range[i].limit, kMaxSequenceNumber, kValueTypeForSeek);
sizes[i] = 0;
if (include_flags & DB::SizeApproximationFlags::INCLUDE_FILES) {
sizes[i] += versions_->ApproximateSize(v, k1.Encode(), k2.Encode());
}
if (include_flags & DB::SizeApproximationFlags::INCLUDE_MEMTABLES) {
sizes[i] += sv->mem->ApproximateStats(k1.Encode(), k2.Encode()).size;
sizes[i] += sv->imm->ApproximateStats(k1.Encode(), k2.Encode()).size;
}
}
ReturnAndCleanupSuperVersion(cfd, sv);
}
std::list<uint64_t>::iterator
DBImpl::CaptureCurrentFileNumberInPendingOutputs() {
// We need to remember the iterator of our insert, because after the
// background job is done, we need to remove that element from
// pending_outputs_.
pending_outputs_.push_back(versions_->current_next_file_number());
auto pending_outputs_inserted_elem = pending_outputs_.end();
--pending_outputs_inserted_elem;
return pending_outputs_inserted_elem;
}
void DBImpl::ReleaseFileNumberFromPendingOutputs(
std::list<uint64_t>::iterator v) {
pending_outputs_.erase(v);
}
#ifndef ROCKSDB_LITE
Status DBImpl::GetUpdatesSince(
SequenceNumber seq, unique_ptr<TransactionLogIterator>* iter,
const TransactionLogIterator::ReadOptions& read_options) {
RecordTick(stats_, GET_UPDATES_SINCE_CALLS);
if (seq > versions_->LastSequence()) {
return Status::NotFound("Requested sequence not yet written in the db");
}
return wal_manager_.GetUpdatesSince(seq, iter, read_options, versions_.get());
}
Status DBImpl::DeleteFile(std::string name) {
uint64_t number;
FileType type;
WalFileType log_type;
if (!ParseFileName(name, &number, &type, &log_type) ||
(type != kTableFile && type != kLogFile)) {
ROCKS_LOG_ERROR(immutable_db_options_.info_log, "DeleteFile %s failed.\n",
name.c_str());
return Status::InvalidArgument("Invalid file name");
}
Status status;
if (type == kLogFile) {
// Only allow deleting archived log files
if (log_type != kArchivedLogFile) {
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"DeleteFile %s failed - not archived log.\n",
name.c_str());
return Status::NotSupported("Delete only supported for archived logs");
}
status = wal_manager_.DeleteFile(name, number);
if (!status.ok()) {
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"DeleteFile %s failed -- %s.\n", name.c_str(),
status.ToString().c_str());
}
return status;
}
int level;
2014-04-07 22:38:53 +00:00
FileMetaData* metadata;
ColumnFamilyData* cfd;
VersionEdit edit;
JobContext job_context(next_job_id_.fetch_add(1), true);
{
InstrumentedMutexLock l(&mutex_);
status = versions_->GetMetadataForFile(number, &level, &metadata, &cfd);
if (!status.ok()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"DeleteFile %s failed. File not found\n", name.c_str());
2014-11-15 00:20:24 +00:00
job_context.Clean();
return Status::InvalidArgument("File not found");
}
assert(level < cfd->NumberLevels());
// If the file is being compacted no need to delete.
if (metadata->being_compacted) {
ROCKS_LOG_INFO(immutable_db_options_.info_log,
"DeleteFile %s Skipped. File about to be compacted\n",
name.c_str());
2014-11-15 00:20:24 +00:00
job_context.Clean();
return Status::OK();
}
// Only the files in the last level can be deleted externally.
// This is to make sure that any deletion tombstones are not
// lost. Check that the level passed is the last level.
auto* vstoreage = cfd->current()->storage_info();
for (int i = level + 1; i < cfd->NumberLevels(); i++) {
if (vstoreage->NumLevelFiles(i) != 0) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"DeleteFile %s FAILED. File not in last level\n",
name.c_str());
2014-11-15 00:20:24 +00:00
job_context.Clean();
return Status::InvalidArgument("File not in last level");
}
}
// if level == 0, it has to be the oldest file
if (level == 0 &&
vstoreage->LevelFiles(0).back()->fd.GetNumber() != number) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"DeleteFile %s failed ---"
" target file in level 0 must be the oldest.",
name.c_str());
2014-11-15 00:20:24 +00:00
job_context.Clean();
return Status::InvalidArgument("File in level 0, but not oldest");
}
edit.SetColumnFamily(cfd->GetID());
edit.DeleteFile(level, number);
status = versions_->LogAndApply(cfd, *cfd->GetLatestMutableCFOptions(),
&edit, &mutex_, directories_.GetDbDir());
if (status.ok()) {
InstallSuperVersionAndScheduleWork(
cfd, &job_context.superversion_context,
*cfd->GetLatestMutableCFOptions());
}
FindObsoleteFiles(&job_context, false);
} // lock released here
LogFlush(immutable_db_options_.info_log);
// remove files outside the db-lock
if (job_context.HaveSomethingToDelete()) {
// Call PurgeObsoleteFiles() without holding mutex.
PurgeObsoleteFiles(job_context);
}
job_context.Clean();
return status;
}
Status DBImpl::DeleteFilesInRanges(ColumnFamilyHandle* column_family,
const RangePtr* ranges, size_t n,
bool include_end) {
Status status;
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
ColumnFamilyData* cfd = cfh->cfd();
VersionEdit edit;
std::set<FileMetaData*> deleted_files;
JobContext job_context(next_job_id_.fetch_add(1), true);
{
InstrumentedMutexLock l(&mutex_);
Version* input_version = cfd->current();
auto* vstorage = input_version->storage_info();
for (size_t r = 0; r < n; r++) {
auto begin = ranges[r].start, end = ranges[r].limit;
for (int i = 1; i < cfd->NumberLevels(); i++) {
if (vstorage->LevelFiles(i).empty() ||
!vstorage->OverlapInLevel(i, begin, end)) {
continue;
}
std::vector<FileMetaData*> level_files;
InternalKey begin_storage, end_storage, *begin_key, *end_key;
if (begin == nullptr) {
begin_key = nullptr;
} else {
begin_storage.SetMinPossibleForUserKey(*begin);
begin_key = &begin_storage;
}
if (end == nullptr) {
end_key = nullptr;
} else {
end_storage.SetMaxPossibleForUserKey(*end);
end_key = &end_storage;
}
vstorage->GetCleanInputsWithinInterval(i, begin_key, end_key,
&level_files, -1 /* hint_index */,
nullptr /* file_index */);
FileMetaData* level_file;
for (uint32_t j = 0; j < level_files.size(); j++) {
level_file = level_files[j];
if (level_file->being_compacted) {
continue;
}
if (deleted_files.find(level_file) != deleted_files.end()) {
continue;
}
if (!include_end && end != nullptr &&
cfd->user_comparator()->Compare(level_file->largest.user_key(), *end) == 0) {
continue;
}
edit.SetColumnFamily(cfd->GetID());
edit.DeleteFile(i, level_file->fd.GetNumber());
deleted_files.insert(level_file);
level_file->being_compacted = true;
}
}
}
if (edit.GetDeletedFiles().empty()) {
job_context.Clean();
return Status::OK();
}
input_version->Ref();
status = versions_->LogAndApply(cfd, *cfd->GetLatestMutableCFOptions(),
&edit, &mutex_, directories_.GetDbDir());
if (status.ok()) {
InstallSuperVersionAndScheduleWork(
cfd, &job_context.superversion_context,
*cfd->GetLatestMutableCFOptions());
}
for (auto* deleted_file : deleted_files) {
deleted_file->being_compacted = false;
}
input_version->Unref();
FindObsoleteFiles(&job_context, false);
} // lock released here
LogFlush(immutable_db_options_.info_log);
// remove files outside the db-lock
if (job_context.HaveSomethingToDelete()) {
// Call PurgeObsoleteFiles() without holding mutex.
PurgeObsoleteFiles(job_context);
}
job_context.Clean();
return status;
}
void DBImpl::GetLiveFilesMetaData(std::vector<LiveFileMetaData>* metadata) {
InstrumentedMutexLock l(&mutex_);
versions_->GetLiveFilesMetaData(metadata);
}
void DBImpl::GetColumnFamilyMetaData(
ColumnFamilyHandle* column_family,
ColumnFamilyMetaData* cf_meta) {
assert(column_family);
auto* cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
auto* sv = GetAndRefSuperVersion(cfd);
sv->current->GetColumnFamilyMetaData(cf_meta);
ReturnAndCleanupSuperVersion(cfd, sv);
}
#endif // ROCKSDB_LITE
Status DBImpl::CheckConsistency() {
mutex_.AssertHeld();
std::vector<LiveFileMetaData> metadata;
versions_->GetLiveFilesMetaData(&metadata);
std::string corruption_messages;
for (const auto& md : metadata) {
// md.name has a leading "/".
std::string file_path = md.db_path + md.name;
uint64_t fsize = 0;
Status s = env_->GetFileSize(file_path, &fsize);
if (!s.ok() &&
env_->GetFileSize(Rocks2LevelTableFileName(file_path), &fsize).ok()) {
s = Status::OK();
}
if (!s.ok()) {
corruption_messages +=
"Can't access " + md.name + ": " + s.ToString() + "\n";
} else if (fsize != md.size) {
corruption_messages += "Sst file size mismatch: " + file_path +
". Size recorded in manifest " +
ToString(md.size) + ", actual size " +
ToString(fsize) + "\n";
}
}
if (corruption_messages.size() == 0) {
return Status::OK();
} else {
return Status::Corruption(corruption_messages);
}
}
Status DBImpl::GetDbIdentity(std::string& identity) const {
std::string idfilename = IdentityFileName(dbname_);
const EnvOptions soptions;
unique_ptr<SequentialFileReader> id_file_reader;
Status s;
{
unique_ptr<SequentialFile> idfile;
s = env_->NewSequentialFile(idfilename, &idfile, soptions);
if (!s.ok()) {
return s;
}
id_file_reader.reset(new SequentialFileReader(std::move(idfile)));
}
uint64_t file_size;
s = env_->GetFileSize(idfilename, &file_size);
if (!s.ok()) {
return s;
}
char* buffer = reinterpret_cast<char*>(alloca(file_size));
Slice id;
s = id_file_reader->Read(static_cast<size_t>(file_size), &id, buffer);
if (!s.ok()) {
return s;
}
identity.assign(id.ToString());
// If last character is '\n' remove it from identity
if (identity.size() > 0 && identity.back() == '\n') {
identity.pop_back();
}
return s;
}
// Default implementation -- returns not supported status
Status DB::CreateColumnFamily(const ColumnFamilyOptions& cf_options,
const std::string& column_family_name,
ColumnFamilyHandle** handle) {
return Status::NotSupported("");
}
Status DB::CreateColumnFamilies(
const ColumnFamilyOptions& cf_options,
const std::vector<std::string>& column_family_names,
std::vector<ColumnFamilyHandle*>* handles) {
return Status::NotSupported("");
}
Status DB::CreateColumnFamilies(
const std::vector<ColumnFamilyDescriptor>& column_families,
std::vector<ColumnFamilyHandle*>* handles) {
return Status::NotSupported("");
}
Status DB::DropColumnFamily(ColumnFamilyHandle* column_family) {
return Status::NotSupported("");
}
Status DB::DropColumnFamilies(
const std::vector<ColumnFamilyHandle*>& column_families) {
return Status::NotSupported("");
}
Status DB::DestroyColumnFamilyHandle(ColumnFamilyHandle* column_family) {
delete column_family;
return Status::OK();
}
DB::~DB() {}
Status DBImpl::Close() {
if (!closed_) {
closed_ = true;
return CloseImpl();
}
return Status::OK();
}
Status DB::ListColumnFamilies(const DBOptions& db_options,
const std::string& name,
std::vector<std::string>* column_families) {
return VersionSet::ListColumnFamilies(column_families, name, db_options.env);
}
Snapshot::~Snapshot() {
}
Status DestroyDB(const std::string& dbname, const Options& options) {
const ImmutableDBOptions soptions(SanitizeOptions(dbname, options));
Env* env = soptions.env;
std::vector<std::string> filenames;
// Ignore error in case directory does not exist
env->GetChildren(dbname, &filenames);
FileLock* lock;
const std::string lockname = LockFileName(dbname);
Status result = env->LockFile(lockname, &lock);
if (result.ok()) {
uint64_t number;
FileType type;
InfoLogPrefix info_log_prefix(!soptions.db_log_dir.empty(), dbname);
for (size_t i = 0; i < filenames.size(); i++) {
if (ParseFileName(filenames[i], &number, info_log_prefix.prefix, &type) &&
type != kDBLockFile) { // Lock file will be deleted at end
Status del;
std::string path_to_delete = dbname + "/" + filenames[i];
if (type == kMetaDatabase) {
del = DestroyDB(path_to_delete, options);
} else if (type == kTableFile) {
del = DeleteSSTFile(&soptions, path_to_delete, 0);
} else {
del = env->DeleteFile(path_to_delete);
}
if (result.ok() && !del.ok()) {
result = del;
}
}
}
for (size_t path_id = 0; path_id < options.db_paths.size(); path_id++) {
const auto& db_path = options.db_paths[path_id];
env->GetChildren(db_path.path, &filenames);
for (size_t i = 0; i < filenames.size(); i++) {
if (ParseFileName(filenames[i], &number, &type) &&
type == kTableFile) { // Lock file will be deleted at end
std::string table_path = db_path.path + "/" + filenames[i];
Status del = DeleteSSTFile(&soptions, table_path,
static_cast<uint32_t>(path_id));
if (result.ok() && !del.ok()) {
result = del;
}
}
}
}
std::vector<std::string> walDirFiles;
std::string archivedir = ArchivalDirectory(dbname);
if (dbname != soptions.wal_dir) {
env->GetChildren(soptions.wal_dir, &walDirFiles);
archivedir = ArchivalDirectory(soptions.wal_dir);
}
// Delete log files in the WAL dir
for (const auto& file : walDirFiles) {
if (ParseFileName(file, &number, &type) && type == kLogFile) {
Status del = env->DeleteFile(LogFileName(soptions.wal_dir, number));
if (result.ok() && !del.ok()) {
result = del;
}
}
}
std::vector<std::string> archiveFiles;
env->GetChildren(archivedir, &archiveFiles);
// Delete archival files.
for (size_t i = 0; i < archiveFiles.size(); ++i) {
if (ParseFileName(archiveFiles[i], &number, &type) &&
type == kLogFile) {
Status del = env->DeleteFile(archivedir + "/" + archiveFiles[i]);
if (result.ok() && !del.ok()) {
result = del;
}
}
}
// ignore case where no archival directory is present
env->DeleteDir(archivedir);
env->UnlockFile(lock); // Ignore error since state is already gone
env->DeleteFile(lockname);
env->DeleteDir(dbname); // Ignore error in case dir contains other files
env->DeleteDir(soptions.wal_dir);
}
return result;
}
Status DBImpl::WriteOptionsFile(bool need_mutex_lock,
bool need_enter_write_thread) {
#ifndef ROCKSDB_LITE
WriteThread::Writer w;
if (need_mutex_lock) {
mutex_.Lock();
} else {
mutex_.AssertHeld();
}
if (need_enter_write_thread) {
write_thread_.EnterUnbatched(&w, &mutex_);
}
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// This part requires mutex to protect the column family options
for (auto cfd : *versions_->GetColumnFamilySet()) {
if (cfd->IsDropped()) {
continue;
}
cf_names.push_back(cfd->GetName());
cf_opts.push_back(cfd->GetLatestCFOptions());
}
// Unlock during expensive operations. New writes cannot get here
// because the single write thread ensures all new writes get queued.
DBOptions db_options =
BuildDBOptions(immutable_db_options_, mutable_db_options_);
mutex_.Unlock();
TEST_SYNC_POINT("DBImpl::WriteOptionsFile:1");
TEST_SYNC_POINT("DBImpl::WriteOptionsFile:2");
std::string file_name =
TempOptionsFileName(GetName(), versions_->NewFileNumber());
Status s =
PersistRocksDBOptions(db_options, cf_names, cf_opts, file_name, GetEnv());
if (s.ok()) {
s = RenameTempFileToOptionsFile(file_name);
}
// restore lock
if (!need_mutex_lock) {
mutex_.Lock();
}
if (need_enter_write_thread) {
write_thread_.ExitUnbatched(&w);
}
if (!s.ok()) {
ROCKS_LOG_WARN(immutable_db_options_.info_log,
"Unnable to persist options -- %s", s.ToString().c_str());
if (immutable_db_options_.fail_if_options_file_error) {
return Status::IOError("Unable to persist options.",
s.ToString().c_str());
}
}
#endif // !ROCKSDB_LITE
return Status::OK();
}
#ifndef ROCKSDB_LITE
namespace {
void DeleteOptionsFilesHelper(const std::map<uint64_t, std::string>& filenames,
const size_t num_files_to_keep,
const std::shared_ptr<Logger>& info_log,
Env* env) {
if (filenames.size() <= num_files_to_keep) {
return;
}
for (auto iter = std::next(filenames.begin(), num_files_to_keep);
iter != filenames.end(); ++iter) {
if (!env->DeleteFile(iter->second).ok()) {
ROCKS_LOG_WARN(info_log, "Unable to delete options file %s",
iter->second.c_str());
}
}
}
} // namespace
#endif // !ROCKSDB_LITE
Status DBImpl::DeleteObsoleteOptionsFiles() {
#ifndef ROCKSDB_LITE
std::vector<std::string> filenames;
// use ordered map to store keep the filenames sorted from the newest
// to the oldest.
std::map<uint64_t, std::string> options_filenames;
Status s;
s = GetEnv()->GetChildren(GetName(), &filenames);
if (!s.ok()) {
return s;
}
for (auto& filename : filenames) {
uint64_t file_number;
FileType type;
if (ParseFileName(filename, &file_number, &type) && type == kOptionsFile) {
options_filenames.insert(
{std::numeric_limits<uint64_t>::max() - file_number,
GetName() + "/" + filename});
}
}
// Keeps the latest 2 Options file
const size_t kNumOptionsFilesKept = 2;
DeleteOptionsFilesHelper(options_filenames, kNumOptionsFilesKept,
immutable_db_options_.info_log, GetEnv());
return Status::OK();
#else
return Status::OK();
#endif // !ROCKSDB_LITE
}
Status DBImpl::RenameTempFileToOptionsFile(const std::string& file_name) {
#ifndef ROCKSDB_LITE
Status s;
versions_->options_file_number_ = versions_->NewFileNumber();
std::string options_file_name =
OptionsFileName(GetName(), versions_->options_file_number_);
// Retry if the file name happen to conflict with an existing one.
s = GetEnv()->RenameFile(file_name, options_file_name);
DeleteObsoleteOptionsFiles();
return s;
#else
return Status::OK();
#endif // !ROCKSDB_LITE
}
#ifdef ROCKSDB_USING_THREAD_STATUS
void DBImpl::NewThreadStatusCfInfo(
ColumnFamilyData* cfd) const {
if (immutable_db_options_.enable_thread_tracking) {
ThreadStatusUtil::NewColumnFamilyInfo(this, cfd, cfd->GetName(),
cfd->ioptions()->env);
}
}
void DBImpl::EraseThreadStatusCfInfo(
ColumnFamilyData* cfd) const {
if (immutable_db_options_.enable_thread_tracking) {
ThreadStatusUtil::EraseColumnFamilyInfo(cfd);
}
}
void DBImpl::EraseThreadStatusDbInfo() const {
if (immutable_db_options_.enable_thread_tracking) {
ThreadStatusUtil::EraseDatabaseInfo(this);
}
}
#else
void DBImpl::NewThreadStatusCfInfo(
ColumnFamilyData* cfd) const {
}
void DBImpl::EraseThreadStatusCfInfo(
ColumnFamilyData* cfd) const {
}
void DBImpl::EraseThreadStatusDbInfo() const {
}
#endif // ROCKSDB_USING_THREAD_STATUS
//
// A global method that can dump out the build version
void DumpRocksDBBuildVersion(Logger * log) {
2014-04-11 17:19:58 +00:00
#if !defined(IOS_CROSS_COMPILE)
// if we compile with Xcode, we don't run build_detect_version, so we don't
// generate util/build_version.cc
ROCKS_LOG_HEADER(log, "RocksDB version: %d.%d.%d\n", ROCKSDB_MAJOR,
ROCKSDB_MINOR, ROCKSDB_PATCH);
ROCKS_LOG_HEADER(log, "Git sha %s", rocksdb_build_git_sha);
ROCKS_LOG_HEADER(log, "Compile date %s", rocksdb_build_compile_date);
2014-04-11 17:19:58 +00:00
#endif
}
#ifndef ROCKSDB_LITE
SequenceNumber DBImpl::GetEarliestMemTableSequenceNumber(SuperVersion* sv,
bool include_history) {
// Find the earliest sequence number that we know we can rely on reading
// from the memtable without needing to check sst files.
SequenceNumber earliest_seq =
sv->imm->GetEarliestSequenceNumber(include_history);
if (earliest_seq == kMaxSequenceNumber) {
earliest_seq = sv->mem->GetEarliestSequenceNumber();
}
assert(sv->mem->GetEarliestSequenceNumber() >= earliest_seq);
return earliest_seq;
}
#endif // ROCKSDB_LITE
#ifndef ROCKSDB_LITE
Status DBImpl::GetLatestSequenceForKey(SuperVersion* sv, const Slice& key,
bool cache_only, SequenceNumber* seq,
bool* found_record_for_key,
bool* is_blob_index) {
Status s;
MergeContext merge_context;
RangeDelAggregator range_del_agg(sv->mem->GetInternalKeyComparator(),
kMaxSequenceNumber);
ReadOptions read_options;
SequenceNumber current_seq = versions_->LastSequence();
LookupKey lkey(key, current_seq);
*seq = kMaxSequenceNumber;
*found_record_for_key = false;
// Check if there is a record for this key in the latest memtable
sv->mem->Get(lkey, nullptr, &s, &merge_context, &range_del_agg, seq,
read_options, nullptr /*read_callback*/, is_blob_index);
if (!(s.ok() || s.IsNotFound() || s.IsMergeInProgress())) {
// unexpected error reading memtable.
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"Unexpected status returned from MemTable::Get: %s\n",
s.ToString().c_str());
return s;
}
if (*seq != kMaxSequenceNumber) {
// Found a sequence number, no need to check immutable memtables
*found_record_for_key = true;
return Status::OK();
}
// Check if there is a record for this key in the immutable memtables
sv->imm->Get(lkey, nullptr, &s, &merge_context, &range_del_agg, seq,
read_options, nullptr /*read_callback*/, is_blob_index);
if (!(s.ok() || s.IsNotFound() || s.IsMergeInProgress())) {
// unexpected error reading memtable.
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"Unexpected status returned from MemTableList::Get: %s\n",
s.ToString().c_str());
return s;
}
if (*seq != kMaxSequenceNumber) {
// Found a sequence number, no need to check memtable history
*found_record_for_key = true;
return Status::OK();
}
// Check if there is a record for this key in the immutable memtables
sv->imm->GetFromHistory(lkey, nullptr, &s, &merge_context, &range_del_agg,
seq, read_options, is_blob_index);
if (!(s.ok() || s.IsNotFound() || s.IsMergeInProgress())) {
// unexpected error reading memtable.
ROCKS_LOG_ERROR(
immutable_db_options_.info_log,
"Unexpected status returned from MemTableList::GetFromHistory: %s\n",
s.ToString().c_str());
return s;
}
if (*seq != kMaxSequenceNumber) {
// Found a sequence number, no need to check SST files
*found_record_for_key = true;
return Status::OK();
}
// TODO(agiardullo): possible optimization: consider checking cached
// SST files if cache_only=true?
if (!cache_only) {
// Check tables
sv->current->Get(read_options, lkey, nullptr, &s, &merge_context,
&range_del_agg, nullptr /* value_found */,
found_record_for_key, seq, nullptr /*read_callback*/,
is_blob_index);
if (!(s.ok() || s.IsNotFound() || s.IsMergeInProgress())) {
// unexpected error reading SST files
ROCKS_LOG_ERROR(immutable_db_options_.info_log,
"Unexpected status returned from Version::Get: %s\n",
s.ToString().c_str());
return s;
}
}
return Status::OK();
}
Status DBImpl::IngestExternalFile(
ColumnFamilyHandle* column_family,
const std::vector<std::string>& external_files,
const IngestExternalFileOptions& ingestion_options) {
Status status;
auto cfh = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family);
auto cfd = cfh->cfd();
// Ingest should immediately fail if ingest_behind is requested,
// but the DB doesn't support it.
if (ingestion_options.ingest_behind) {
if (!immutable_db_options_.allow_ingest_behind) {
return Status::InvalidArgument(
"Can't ingest_behind file in DB with allow_ingest_behind=false");
}
}
ExternalSstFileIngestionJob ingestion_job(env_, versions_.get(), cfd,
immutable_db_options_, env_options_,
&snapshots_, ingestion_options);
std::list<uint64_t>::iterator pending_output_elem;
{
InstrumentedMutexLock l(&mutex_);
if (!bg_error_.ok()) {
// Don't ingest files when there is a bg_error
return bg_error_;
}
// Make sure that bg cleanup wont delete the files that we are ingesting
pending_output_elem = CaptureCurrentFileNumberInPendingOutputs();
}
status = ingestion_job.Prepare(external_files);
if (!status.ok()) {
return status;
}
SuperVersionContext sv_context(/* create_superversion */ true);
TEST_SYNC_POINT("DBImpl::AddFile:Start");
{
// Lock db mutex
InstrumentedMutexLock l(&mutex_);
TEST_SYNC_POINT("DBImpl::AddFile:MutexLock");
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
// Stop writes to the DB by entering both write threads
WriteThread::Writer w;
write_thread_.EnterUnbatched(&w, &mutex_);
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
WriteThread::Writer nonmem_w;
if (two_write_queues_) {
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
nonmem_write_thread_.EnterUnbatched(&nonmem_w, &mutex_);
}
num_running_ingest_file_++;
// We cannot ingest a file into a dropped CF
if (cfd->IsDropped()) {
status = Status::InvalidArgument(
"Cannot ingest an external file into a dropped CF");
}
// Figure out if we need to flush the memtable first
if (status.ok()) {
bool need_flush = false;
status = ingestion_job.NeedsFlush(&need_flush);
TEST_SYNC_POINT_CALLBACK("DBImpl::IngestExternalFile:NeedFlush",
&need_flush);
if (status.ok() && need_flush) {
mutex_.Unlock();
status = FlushMemTable(cfd, FlushOptions(), true /* writes_stopped */);
mutex_.Lock();
}
}
// Run the ingestion job
if (status.ok()) {
status = ingestion_job.Run();
}
// Install job edit [Mutex will be unlocked here]
auto mutable_cf_options = cfd->GetLatestMutableCFOptions();
if (status.ok()) {
status =
versions_->LogAndApply(cfd, *mutable_cf_options, ingestion_job.edit(),
&mutex_, directories_.GetDbDir());
}
if (status.ok()) {
InstallSuperVersionAndScheduleWork(cfd, &sv_context,
*mutable_cf_options);
}
// Resume writes to the DB
if (two_write_queues_) {
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
nonmem_write_thread_.ExitUnbatched(&nonmem_w);
}
write_thread_.ExitUnbatched(&w);
// Update stats
if (status.ok()) {
ingestion_job.UpdateStats();
}
ReleaseFileNumberFromPendingOutputs(pending_output_elem);
num_running_ingest_file_--;
if (num_running_ingest_file_ == 0) {
bg_cv_.SignalAll();
}
TEST_SYNC_POINT("DBImpl::AddFile:MutexUnlock");
}
// mutex_ is unlocked here
// Cleanup
sv_context.Clean();
ingestion_job.Cleanup(status);
if (status.ok()) {
NotifyOnExternalFileIngested(cfd, ingestion_job);
}
return status;
}
Status DBImpl::VerifyChecksum() {
Status s;
Options options;
EnvOptions env_options;
std::vector<ColumnFamilyData*> cfd_list;
{
InstrumentedMutexLock l(&mutex_);
for (auto cfd : *versions_->GetColumnFamilySet()) {
if (!cfd->IsDropped() && cfd->initialized()) {
cfd->Ref();
cfd_list.push_back(cfd);
}
}
}
std::vector<SuperVersion*> sv_list;
for (auto cfd : cfd_list) {
sv_list.push_back(cfd->GetReferencedSuperVersion(&mutex_));
}
for (auto& sv : sv_list) {
VersionStorageInfo* vstorage = sv->current->storage_info();
for (int i = 0; i < vstorage->num_non_empty_levels() && s.ok(); i++) {
for (size_t j = 0; j < vstorage->LevelFilesBrief(i).num_files && s.ok();
j++) {
const auto& fd = vstorage->LevelFilesBrief(i).files[j].fd;
std::string fname = TableFileName(immutable_db_options_.db_paths,
fd.GetNumber(), fd.GetPathId());
s = rocksdb::VerifySstFileChecksum(options, env_options, fname);
}
}
if (!s.ok()) {
break;
}
}
{
InstrumentedMutexLock l(&mutex_);
for (auto sv : sv_list) {
if (sv && sv->Unref()) {
sv->Cleanup();
delete sv;
}
}
for (auto cfd : cfd_list) {
cfd->Unref();
}
}
return s;
}
void DBImpl::NotifyOnExternalFileIngested(
ColumnFamilyData* cfd, const ExternalSstFileIngestionJob& ingestion_job) {
#ifndef ROCKSDB_LITE
if (immutable_db_options_.listeners.empty()) {
return;
}
for (const IngestedFileInfo& f : ingestion_job.files_to_ingest()) {
ExternalFileIngestionInfo info;
info.cf_name = cfd->GetName();
info.external_file_path = f.external_file_path;
info.internal_file_path = f.internal_file_path;
info.global_seqno = f.assigned_seqno;
info.table_properties = f.table_properties;
for (auto listener : immutable_db_options_.listeners) {
listener->OnExternalFileIngested(this, info);
}
}
#endif
}
void DBImpl::WaitForIngestFile() {
mutex_.AssertHeld();
while (num_running_ingest_file_ > 0) {
bg_cv_.Wait();
}
}
#endif // ROCKSDB_LITE
} // namespace rocksdb