rocksdb/db/fault_injection_test.cc

670 lines
21 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright 2014 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
// This test uses a custom Env to keep track of the state of a filesystem as of
// the last "sync". It then checks for data loss errors by purposely dropping
// file data (or entire files) not protected by a "sync".
#include "db/db_impl/db_impl.h"
Sync WAL during db Close() (#12556) Summary: **Context/Summary:** Below crash test found out we don't sync WAL upon DB close, which can lead to unsynced data loss. This PR syncs it. ``` ./db_stress --threads=1 --disable_auto_compactions=1 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=1 --advise_random_on_open=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=0 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=1 --bloom_bits=29.895303579352174 --bottommost_compression_type=disable --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=0 --compaction_readahead_size=0 --compaction_style=0 --compaction_ttl=0 --compress_format_version=2 --compressed_secondary_cache_ratio=0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=4 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --default_temperature=kUnknown --default_write_temperature=kUnknown --delete_obsolete_files_period_micros=0 --delpercent=0 --delrangepercent=0 --destroy_db_initially=1 --detect_filter_construct_corruption=1 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=0 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=1 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=none --fill_cache=0 --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0 --index_block_restart_interval=6 --index_shortening=0 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=0 --key_len_percent_dist=1,30,69 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=0 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=16777216 --long_running_snapshots=0 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=5120 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=2500000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=8 --max_total_wal_size=0 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=0 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=0 --min_write_buffer_number_to_merge=1 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=3 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=0 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=0 --recycle_log_file_num=0 --reopen=2 --report_bg_io_stats=1 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=1 --snapshot_hold_ops=0 --soft_pending_compaction_bytes_limit=68719476736 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=0 --subcompactions=3 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=3 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=0 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=100 Verification failed for column family 0 key 000000000000B9D1000000000000012B000000000000017D (4756691): value_from_db: , value_from_expected: 010000000504070609080B0A0D0C0F0E111013121514171619181B1A1D1C1F1E212023222524272629282B2A2D2C2F2E313033323534373639383B3A3D3C3F3E, msg: Iterator verification: Value not found: NotFound: Verification failed :( ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12556 Test Plan: - New UT - Same stress test command failed before this fix but pass after - CI Reviewed By: ajkr Differential Revision: D56267964 Pulled By: hx235 fbshipit-source-id: af1b7e8769c129f64ba1c7f1ff17102f1239b929
2024-05-21 00:33:43 +00:00
#include "db/db_test_util.h"
#include "db/log_format.h"
#include "db/version_set.h"
#include "env/mock_env.h"
#include "file/filename.h"
#include "rocksdb/cache.h"
#include "rocksdb/convenience.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/table.h"
#include "rocksdb/write_batch.h"
#include "test_util/sync_point.h"
#include "test_util/testharness.h"
#include "test_util/testutil.h"
#include "util/mutexlock.h"
#include "util/random.h"
#include "utilities/fault_injection_env.h"
Fix a bug causing duplicate trailing entries in WritableFile (buffered IO) (#9236) Summary: `db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619). In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a file from a given level twice. Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause. WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each `WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared. If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS` buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then such data will still exist in the `FaultInjectionTestFS`'s buffer. Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`. We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the data appended to the file. To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode. This PR includes a unit test to reproduce a case when write error injection to `WritableFile` can cause duplicate trailing entries. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D33033984 Pulled By: riversand963 fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
2021-12-13 16:59:20 +00:00
#ifndef NDEBUG
#include "utilities/fault_injection_fs.h"
#endif
namespace ROCKSDB_NAMESPACE {
static const int kValueSize = 1000;
static const int kMaxNumValues = 2000;
static const size_t kNumIterations = 3;
enum FaultInjectionOptionConfig {
kDefault,
kDifferentDataDir,
kWalDir,
kSyncWal,
kWalDirSyncWal,
kMultiLevels,
kEnd,
};
class FaultInjectionTest
: public testing::Test,
public testing::WithParamInterface<std::tuple<
bool, FaultInjectionOptionConfig, FaultInjectionOptionConfig>> {
protected:
int option_config_;
int non_inclusive_end_range_; // kEnd or equivalent to that
// When need to make sure data is persistent, sync WAL
bool sync_use_wal_;
// When need to make sure data is persistent, call DB::CompactRange()
bool sync_use_compact_;
bool sequential_order_;
public:
enum ExpectedVerifResult { kValExpectFound, kValExpectNoError };
enum ResetMethod {
kResetDropUnsyncedData,
kResetDropRandomUnsyncedData,
kResetDeleteUnsyncedFiles,
kResetDropAndDeleteUnsynced
};
std::unique_ptr<Env> base_env_;
FaultInjectionTestEnv* env_;
std::string dbname_;
std::shared_ptr<Cache> tiny_cache_;
Options options_;
DB* db_;
FaultInjectionTest()
: option_config_(std::get<1>(GetParam())),
non_inclusive_end_range_(std::get<2>(GetParam())),
sync_use_wal_(false),
sync_use_compact_(true),
base_env_(nullptr),
env_(nullptr),
db_(nullptr) {
EXPECT_OK(
test::CreateEnvFromSystem(ConfigOptions(), &system_env_, &env_guard_));
EXPECT_NE(system_env_, nullptr);
}
~FaultInjectionTest() override {
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->ClearAllCallBacks();
}
bool ChangeOptions() {
option_config_++;
if (option_config_ >= non_inclusive_end_range_) {
return false;
} else {
if (option_config_ == kMultiLevels) {
base_env_.reset(MockEnv::Create(system_env_));
}
return true;
}
}
// Return the current option configuration.
Options CurrentOptions() {
sync_use_wal_ = false;
sync_use_compact_ = true;
Options options;
switch (option_config_) {
case kWalDir:
options.wal_dir = test::PerThreadDBPath(env_, "fault_test_wal");
break;
case kDifferentDataDir:
options.db_paths.emplace_back(
test::PerThreadDBPath(env_, "fault_test_data"), 1000000U);
break;
case kSyncWal:
sync_use_wal_ = true;
sync_use_compact_ = false;
break;
case kWalDirSyncWal:
options.wal_dir = test::PerThreadDBPath(env_, "/fault_test_wal");
sync_use_wal_ = true;
sync_use_compact_ = false;
break;
case kMultiLevels:
options.write_buffer_size = 64 * 1024;
options.target_file_size_base = 64 * 1024;
options.level0_file_num_compaction_trigger = 2;
options.level0_slowdown_writes_trigger = 2;
options.level0_stop_writes_trigger = 4;
options.max_bytes_for_level_base = 128 * 1024;
options.max_write_buffer_number = 2;
options.max_background_compactions = 8;
options.max_background_flushes = 8;
sync_use_wal_ = true;
sync_use_compact_ = false;
break;
default:
break;
}
return options;
}
Status NewDB() {
assert(db_ == nullptr);
assert(tiny_cache_ == nullptr);
assert(env_ == nullptr);
env_ = new FaultInjectionTestEnv(base_env_ ? base_env_.get() : system_env_);
options_ = CurrentOptions();
options_.env = env_;
options_.paranoid_checks = true;
BlockBasedTableOptions table_options;
tiny_cache_ = NewLRUCache(100);
table_options.block_cache = tiny_cache_;
options_.table_factory.reset(NewBlockBasedTableFactory(table_options));
dbname_ = test::PerThreadDBPath("fault_test");
rocksdb: Replace ASSERT* with EXPECT* in functions that does not return void value Summary: gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes. In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases. In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed: ```lang=bash % USE_CLANG=1 make all -j55 -k 2> build.log % perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \ build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number' % make format ``` After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest. This diff is independent and contains manual changes only in `util/testharness.h`. Test Plan: Make sure all tests are passing. ```lang=bash % USE_CLANG=1 make check ``` Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D33333
2015-03-17 03:52:32 +00:00
EXPECT_OK(DestroyDB(dbname_, options_));
options_.create_if_missing = true;
Status s = OpenDB();
options_.create_if_missing = false;
return s;
}
void SetUp() override {
sequential_order_ = std::get<0>(GetParam());
ASSERT_OK(NewDB());
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
void TearDown() override {
CloseDB();
Status s = DestroyDB(dbname_, options_);
delete env_;
env_ = nullptr;
tiny_cache_.reset();
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
ASSERT_OK(s);
}
void Build(const WriteOptions& write_options, int start_idx, int num_vals) {
std::string key_space, value_space;
WriteBatch batch;
for (int i = start_idx; i < start_idx + num_vals; i++) {
Slice key = Key(i, &key_space);
batch.Clear();
ASSERT_OK(batch.Put(key, Value(i, &value_space)));
ASSERT_OK(db_->Write(write_options, &batch));
}
}
Status ReadValue(int i, std::string* val) const {
std::string key_space, value_space;
Slice key = Key(i, &key_space);
Value(i, &value_space);
ReadOptions options;
return db_->Get(options, key, val);
}
Status Verify(int start_idx, int num_vals,
ExpectedVerifResult expected) const {
std::string val;
std::string value_space;
Status s;
for (int i = start_idx; i < start_idx + num_vals && s.ok(); i++) {
Value(i, &value_space);
s = ReadValue(i, &val);
if (s.ok()) {
rocksdb: Replace ASSERT* with EXPECT* in functions that does not return void value Summary: gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes. In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases. In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed: ```lang=bash % USE_CLANG=1 make all -j55 -k 2> build.log % perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \ build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number' % make format ``` After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest. This diff is independent and contains manual changes only in `util/testharness.h`. Test Plan: Make sure all tests are passing. ```lang=bash % USE_CLANG=1 make check ``` Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D33333
2015-03-17 03:52:32 +00:00
EXPECT_EQ(value_space, val);
}
if (expected == kValExpectFound) {
if (!s.ok()) {
fprintf(stderr, "Error when read %dth record (expect found): %s\n", i,
s.ToString().c_str());
return s;
}
} else if (!s.ok() && !s.IsNotFound()) {
fprintf(stderr, "Error when read %dth record: %s\n", i,
s.ToString().c_str());
return s;
}
}
return Status::OK();
}
// Return the ith key
Slice Key(int i, std::string* storage) const {
unsigned long long num = i;
if (!sequential_order_) {
// random transfer
const int m = 0x5bd1e995;
num *= m;
num ^= num << 24;
}
char buf[100];
snprintf(buf, sizeof(buf), "%016d", static_cast<int>(num));
storage->assign(buf, strlen(buf));
return Slice(*storage);
}
// Return the value to associate with the specified key
Slice Value(int k, std::string* storage) const {
Random r(k);
*storage = r.RandomString(kValueSize);
return Slice(*storage);
}
void CloseDB() {
delete db_;
db_ = nullptr;
}
Status OpenDB() {
CloseDB();
env_->ResetState();
Status s = DB::Open(options_, dbname_, &db_);
assert(db_ != nullptr);
return s;
}
void DeleteAllData() {
Iterator* iter = db_->NewIterator(ReadOptions());
WriteOptions options;
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
ASSERT_OK(db_->Delete(WriteOptions(), iter->key()));
}
ASSERT_OK(iter->status());
delete iter;
FlushOptions flush_options;
flush_options.wait = true;
ASSERT_OK(db_->Flush(flush_options));
}
// rnd cannot be null for kResetDropRandomUnsyncedData
void ResetDBState(ResetMethod reset_method, Random* rnd = nullptr) {
env_->AssertNoOpenFile();
switch (reset_method) {
case kResetDropUnsyncedData:
ASSERT_OK(env_->DropUnsyncedFileData());
break;
case kResetDropRandomUnsyncedData:
ASSERT_OK(env_->DropRandomUnsyncedFileData(rnd));
break;
case kResetDeleteUnsyncedFiles:
ASSERT_OK(env_->DeleteFilesCreatedAfterLastDirSync());
break;
case kResetDropAndDeleteUnsynced:
ASSERT_OK(env_->DropUnsyncedFileData());
ASSERT_OK(env_->DeleteFilesCreatedAfterLastDirSync());
break;
default:
assert(false);
}
}
void PartialCompactTestPreFault(int num_pre_sync, int num_post_sync) {
DeleteAllData();
WriteOptions write_options;
write_options.sync = sync_use_wal_;
Build(write_options, 0, num_pre_sync);
if (sync_use_compact_) {
ASSERT_OK(db_->CompactRange(CompactRangeOptions(), nullptr, nullptr));
}
write_options.sync = false;
Build(write_options, num_pre_sync, num_post_sync);
}
void PartialCompactTestReopenWithFault(ResetMethod reset_method,
int num_pre_sync, int num_post_sync,
Random* rnd = nullptr) {
env_->SetFilesystemActive(false);
CloseDB();
ResetDBState(reset_method, rnd);
ASSERT_OK(OpenDB());
ASSERT_OK(Verify(0, num_pre_sync, FaultInjectionTest::kValExpectFound));
ASSERT_OK(Verify(num_pre_sync, num_post_sync,
FaultInjectionTest::kValExpectNoError));
WaitCompactionFinish();
ASSERT_OK(Verify(0, num_pre_sync, FaultInjectionTest::kValExpectFound));
ASSERT_OK(Verify(num_pre_sync, num_post_sync,
FaultInjectionTest::kValExpectNoError));
}
void NoWriteTestPreFault() {}
void NoWriteTestReopenWithFault(ResetMethod reset_method) {
CloseDB();
ResetDBState(reset_method);
ASSERT_OK(OpenDB());
}
void WaitCompactionFinish() {
ASSERT_OK(static_cast<DBImpl*>(db_->GetRootDB())->TEST_WaitForCompact());
ASSERT_OK(db_->Put(WriteOptions(), "", ""));
}
private:
Env* system_env_;
std::shared_ptr<Env> env_guard_;
};
class FaultInjectionTestSplitted : public FaultInjectionTest {};
TEST_P(FaultInjectionTestSplitted, FaultTest) {
do {
Random rnd(301);
for (size_t idx = 0; idx < kNumIterations; idx++) {
int num_pre_sync = rnd.Uniform(kMaxNumValues);
int num_post_sync = rnd.Uniform(kMaxNumValues);
PartialCompactTestPreFault(num_pre_sync, num_post_sync);
PartialCompactTestReopenWithFault(kResetDropUnsyncedData, num_pre_sync,
num_post_sync);
NoWriteTestPreFault();
NoWriteTestReopenWithFault(kResetDropUnsyncedData);
PartialCompactTestPreFault(num_pre_sync, num_post_sync);
PartialCompactTestReopenWithFault(kResetDropRandomUnsyncedData,
num_pre_sync, num_post_sync, &rnd);
NoWriteTestPreFault();
NoWriteTestReopenWithFault(kResetDropUnsyncedData);
// Setting a separate data path won't pass the test as we don't sync
// it after creating new files,
PartialCompactTestPreFault(num_pre_sync, num_post_sync);
PartialCompactTestReopenWithFault(kResetDropAndDeleteUnsynced,
num_pre_sync, num_post_sync);
NoWriteTestPreFault();
NoWriteTestReopenWithFault(kResetDropAndDeleteUnsynced);
PartialCompactTestPreFault(num_pre_sync, num_post_sync);
// No new files created so we expect all values since no files will be
// dropped.
PartialCompactTestReopenWithFault(kResetDeleteUnsyncedFiles, num_pre_sync,
num_post_sync);
NoWriteTestPreFault();
NoWriteTestReopenWithFault(kResetDeleteUnsyncedFiles);
}
} while (ChangeOptions());
}
// Previous log file is not fsynced if sync is forced after log rolling.
TEST_P(FaultInjectionTest, WriteOptionSyncTest) {
test::SleepingBackgroundTask sleeping_task_low;
env_->SetBackgroundThreads(1, Env::HIGH);
// Block the job queue to prevent flush job from running.
env_->Schedule(&test::SleepingBackgroundTask::DoSleepTask, &sleeping_task_low,
Env::Priority::HIGH);
sleeping_task_low.WaitUntilSleeping();
WriteOptions write_options;
write_options.sync = false;
std::string key_space, value_space;
ASSERT_OK(
db_->Put(write_options, Key(1, &key_space), Value(1, &value_space)));
FlushOptions flush_options;
flush_options.wait = false;
ASSERT_OK(db_->Flush(flush_options));
write_options.sync = true;
ASSERT_OK(
db_->Put(write_options, Key(2, &key_space), Value(2, &value_space)));
ASSERT_OK(db_->FlushWAL(false));
env_->SetFilesystemActive(false);
NoWriteTestReopenWithFault(kResetDropAndDeleteUnsynced);
sleeping_task_low.WakeUp();
sleeping_task_low.WaitUntilDone();
ASSERT_OK(OpenDB());
std::string val;
Value(2, &value_space);
ASSERT_OK(ReadValue(2, &val));
ASSERT_EQ(value_space, val);
Value(1, &value_space);
ASSERT_OK(ReadValue(1, &val));
ASSERT_EQ(value_space, val);
}
TEST_P(FaultInjectionTest, UninstalledCompaction) {
options_.target_file_size_base = 32 * 1024;
options_.write_buffer_size = 100 << 10; // 100KB
options_.level0_file_num_compaction_trigger = 6;
options_.level0_stop_writes_trigger = 1 << 10;
options_.level0_slowdown_writes_trigger = 1 << 10;
options_.max_background_compactions = 1;
ASSERT_OK(OpenDB());
if (!sequential_order_) {
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency({
{"FaultInjectionTest::FaultTest:0", "DBImpl::BGWorkCompaction"},
{"CompactionJob::Run():End", "FaultInjectionTest::FaultTest:1"},
{"FaultInjectionTest::FaultTest:2",
"DBImpl::BackgroundCompaction:NonTrivial:AfterRun"},
});
}
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
int kNumKeys = 1000;
Build(WriteOptions(), 0, kNumKeys);
FlushOptions flush_options;
flush_options.wait = true;
ASSERT_OK(db_->Flush(flush_options));
ASSERT_OK(db_->Put(WriteOptions(), "", ""));
TEST_SYNC_POINT("FaultInjectionTest::FaultTest:0");
TEST_SYNC_POINT("FaultInjectionTest::FaultTest:1");
env_->SetFilesystemActive(false);
TEST_SYNC_POINT("FaultInjectionTest::FaultTest:2");
CloseDB();
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
ResetDBState(kResetDropUnsyncedData);
std::atomic<bool> opened(false);
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
"DBImpl::Open:Opened", [&](void* /*arg*/) { opened.store(true); });
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
"DBImpl::BGWorkCompaction",
[&](void* /*arg*/) { ASSERT_TRUE(opened.load()); });
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
ASSERT_OK(OpenDB());
ASSERT_OK(Verify(0, kNumKeys, FaultInjectionTest::kValExpectFound));
WaitCompactionFinish();
ASSERT_OK(Verify(0, kNumKeys, FaultInjectionTest::kValExpectFound));
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->ClearAllCallBacks();
}
TEST_P(FaultInjectionTest, ManualLogSyncTest) {
test::SleepingBackgroundTask sleeping_task_low;
env_->SetBackgroundThreads(1, Env::HIGH);
// Block the job queue to prevent flush job from running.
env_->Schedule(&test::SleepingBackgroundTask::DoSleepTask, &sleeping_task_low,
Env::Priority::HIGH);
sleeping_task_low.WaitUntilSleeping();
WriteOptions write_options;
write_options.sync = false;
std::string key_space, value_space;
ASSERT_OK(
db_->Put(write_options, Key(1, &key_space), Value(1, &value_space)));
FlushOptions flush_options;
flush_options.wait = false;
ASSERT_OK(db_->Flush(flush_options));
ASSERT_OK(
db_->Put(write_options, Key(2, &key_space), Value(2, &value_space)));
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
ASSERT_OK(db_->FlushWAL(true));
env_->SetFilesystemActive(false);
NoWriteTestReopenWithFault(kResetDropAndDeleteUnsynced);
sleeping_task_low.WakeUp();
sleeping_task_low.WaitUntilDone();
ASSERT_OK(OpenDB());
std::string val;
Value(2, &value_space);
ASSERT_OK(ReadValue(2, &val));
ASSERT_EQ(value_space, val);
Value(1, &value_space);
ASSERT_OK(ReadValue(1, &val));
ASSERT_EQ(value_space, val);
}
TEST_P(FaultInjectionTest, WriteBatchWalTerminationTest) {
ReadOptions ro;
Options options = CurrentOptions();
options.env = env_;
WriteOptions wo;
wo.sync = true;
wo.disableWAL = false;
WriteBatch batch;
ASSERT_OK(batch.Put("cats", "dogs"));
batch.MarkWalTerminationPoint();
ASSERT_OK(batch.Put("boys", "girls"));
ASSERT_OK(db_->Write(wo, &batch));
env_->SetFilesystemActive(false);
NoWriteTestReopenWithFault(kResetDropAndDeleteUnsynced);
ASSERT_OK(OpenDB());
std::string val;
ASSERT_OK(db_->Get(ro, "cats", &val));
ASSERT_EQ("dogs", val);
ASSERT_EQ(db_->Get(ro, "boys", &val), Status::NotFound());
}
Fix a bug causing duplicate trailing entries in WritableFile (buffered IO) (#9236) Summary: `db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619). In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a file from a given level twice. Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause. WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each `WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared. If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS` buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then such data will still exist in the `FaultInjectionTestFS`'s buffer. Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`. We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the data appended to the file. To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode. This PR includes a unit test to reproduce a case when write error injection to `WritableFile` can cause duplicate trailing entries. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D33033984 Pulled By: riversand963 fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
2021-12-13 16:59:20 +00:00
TEST_P(FaultInjectionTest, NoDuplicateTrailingEntries) {
auto fault_fs = std::make_shared<FaultInjectionTestFS>(FileSystem::Default());
fault_fs->EnableWriteErrorInjection();
fault_fs->SetFilesystemDirectWritable(false);
const std::string file_name = NormalizePath(dbname_ + "/test_file");
std::unique_ptr<log::Writer> log_writer = nullptr;
constexpr uint64_t log_number = 0;
{
std::unique_ptr<FSWritableFile> file;
const Status s =
fault_fs->NewWritableFile(file_name, FileOptions(), &file, nullptr);
ASSERT_OK(s);
std::unique_ptr<WritableFileWriter> fwriter(
new WritableFileWriter(std::move(file), file_name, FileOptions()));
log_writer.reset(new log::Writer(std::move(fwriter), log_number,
/*recycle_log_files=*/false));
}
fault_fs->SetRandomWriteError(
0xdeadbeef, /*one_in=*/1, IOStatus::IOError("Injected IOError"),
/*inject_for_all_file_types=*/true, /*types=*/{});
{
VersionEdit edit;
edit.SetColumnFamily(0);
std::string buf;
assert(edit.EncodeTo(&buf));
Group SST write in flush, compaction and db open with new stats (#11910) Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 23:29:23 +00:00
const Status s = log_writer->AddRecord(WriteOptions(), buf);
Fix a bug causing duplicate trailing entries in WritableFile (buffered IO) (#9236) Summary: `db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619). In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a file from a given level twice. Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause. WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each `WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared. If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS` buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then such data will still exist in the `FaultInjectionTestFS`'s buffer. Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`. We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the data appended to the file. To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode. This PR includes a unit test to reproduce a case when write error injection to `WritableFile` can cause duplicate trailing entries. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D33033984 Pulled By: riversand963 fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
2021-12-13 16:59:20 +00:00
ASSERT_NOK(s);
}
fault_fs->DisableWriteErrorInjection();
// Flush remaining data from its buffer to underlying file.
ASSERT_OK(log_writer->file()->writable_file()->Sync(IOOptions(),
nullptr /* dbg */));
// Closing the log writer will cause WritableFileWriter::Close()
Fix a bug causing duplicate trailing entries in WritableFile (buffered IO) (#9236) Summary: `db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619). In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a file from a given level twice. Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause. WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each `WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared. If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS` buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then such data will still exist in the `FaultInjectionTestFS`'s buffer. Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`. We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the data appended to the file. To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode. This PR includes a unit test to reproduce a case when write error injection to `WritableFile` can cause duplicate trailing entries. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236 Test Plan: make check Reviewed By: zhichao-cao Differential Revision: D33033984 Pulled By: riversand963 fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
2021-12-13 16:59:20 +00:00
log_writer.reset();
{
std::unique_ptr<FSSequentialFile> file;
Status s =
fault_fs->NewSequentialFile(file_name, FileOptions(), &file, nullptr);
ASSERT_OK(s);
std::unique_ptr<SequentialFileReader> freader(
new SequentialFileReader(std::move(file), file_name));
Status log_read_s;
class LogReporter : public log::Reader::Reporter {
public:
Status* status_;
explicit LogReporter(Status* _s) : status_(_s) {}
void Corruption(size_t /*bytes*/, const Status& _s) override {
if (status_->ok()) {
*status_ = _s;
}
}
} reporter(&log_read_s);
std::unique_ptr<log::Reader> log_reader(new log::Reader(
nullptr, std::move(freader), &reporter, /*checksum=*/true, log_number));
Slice record;
std::string data;
size_t count = 0;
while (log_reader->ReadRecord(&record, &data) && log_read_s.ok()) {
VersionEdit edit;
ASSERT_OK(edit.DecodeFrom(data));
++count;
}
// Verify that only one version edit exists in the file.
ASSERT_EQ(1, count);
}
}
INSTANTIATE_TEST_CASE_P(
FaultTest, FaultInjectionTest,
::testing::Values(std::make_tuple(false, kDefault, kEnd),
std::make_tuple(true, kDefault, kEnd)));
INSTANTIATE_TEST_CASE_P(
FaultTest, FaultInjectionTestSplitted,
::testing::Values(std::make_tuple(false, kDefault, kSyncWal),
std::make_tuple(true, kDefault, kSyncWal),
std::make_tuple(false, kSyncWal, kEnd),
std::make_tuple(true, kSyncWal, kEnd)));
Sync WAL during db Close() (#12556) Summary: **Context/Summary:** Below crash test found out we don't sync WAL upon DB close, which can lead to unsynced data loss. This PR syncs it. ``` ./db_stress --threads=1 --disable_auto_compactions=1 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=1 --advise_random_on_open=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=0 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=1 --bloom_bits=29.895303579352174 --bottommost_compression_type=disable --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=0 --compaction_readahead_size=0 --compaction_style=0 --compaction_ttl=0 --compress_format_version=2 --compressed_secondary_cache_ratio=0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=4 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --default_temperature=kUnknown --default_write_temperature=kUnknown --delete_obsolete_files_period_micros=0 --delpercent=0 --delrangepercent=0 --destroy_db_initially=1 --detect_filter_construct_corruption=1 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=0 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=1 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=none --fill_cache=0 --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0 --index_block_restart_interval=6 --index_shortening=0 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=0 --key_len_percent_dist=1,30,69 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=0 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=16777216 --long_running_snapshots=0 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=5120 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=2500000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=8 --max_total_wal_size=0 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=0 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=0 --min_write_buffer_number_to_merge=1 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=3 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=0 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=0 --recycle_log_file_num=0 --reopen=2 --report_bg_io_stats=1 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=1 --snapshot_hold_ops=0 --soft_pending_compaction_bytes_limit=68719476736 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=0 --subcompactions=3 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=3 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=0 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=100 Verification failed for column family 0 key 000000000000B9D1000000000000012B000000000000017D (4756691): value_from_db: , value_from_expected: 010000000504070609080B0A0D0C0F0E111013121514171619181B1A1D1C1F1E212023222524272629282B2A2D2C2F2E313033323534373639383B3A3D3C3F3E, msg: Iterator verification: Value not found: NotFound: Verification failed :( ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12556 Test Plan: - New UT - Same stress test command failed before this fix but pass after - CI Reviewed By: ajkr Differential Revision: D56267964 Pulled By: hx235 fbshipit-source-id: af1b7e8769c129f64ba1c7f1ff17102f1239b929
2024-05-21 00:33:43 +00:00
class FaultInjectionFSTest : public DBTestBase {
public:
FaultInjectionFSTest()
: DBTestBase("fault_injection_fs_test", /*env_do_fsync=*/false) {}
};
TEST_F(FaultInjectionFSTest, SyncWALDuringDBClose) {
std::shared_ptr<FaultInjectionTestFS> fault_fs =
std::make_shared<FaultInjectionTestFS>(env_->GetFileSystem());
std::unique_ptr<Env> env(new CompositeEnvWrapper(env_, fault_fs));
Options options = CurrentOptions();
options.manual_wal_flush = true;
Sync WAL during db Close() (#12556) Summary: **Context/Summary:** Below crash test found out we don't sync WAL upon DB close, which can lead to unsynced data loss. This PR syncs it. ``` ./db_stress --threads=1 --disable_auto_compactions=1 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=1 --advise_random_on_open=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=0 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=1 --bloom_bits=29.895303579352174 --bottommost_compression_type=disable --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=0 --compaction_readahead_size=0 --compaction_style=0 --compaction_ttl=0 --compress_format_version=2 --compressed_secondary_cache_ratio=0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=4 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --default_temperature=kUnknown --default_write_temperature=kUnknown --delete_obsolete_files_period_micros=0 --delpercent=0 --delrangepercent=0 --destroy_db_initially=1 --detect_filter_construct_corruption=1 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=0 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=1 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=none --fill_cache=0 --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0 --index_block_restart_interval=6 --index_shortening=0 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=0 --key_len_percent_dist=1,30,69 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=0 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=16777216 --long_running_snapshots=0 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=5120 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=2500000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=8 --max_total_wal_size=0 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=0 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=0 --min_write_buffer_number_to_merge=1 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=3 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=0 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=0 --recycle_log_file_num=0 --reopen=2 --report_bg_io_stats=1 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=1 --snapshot_hold_ops=0 --soft_pending_compaction_bytes_limit=68719476736 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=0 --subcompactions=3 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=3 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=0 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=100 Verification failed for column family 0 key 000000000000B9D1000000000000012B000000000000017D (4756691): value_from_db: , value_from_expected: 010000000504070609080B0A0D0C0F0E111013121514171619181B1A1D1C1F1E212023222524272629282B2A2D2C2F2E313033323534373639383B3A3D3C3F3E, msg: Iterator verification: Value not found: NotFound: Verification failed :( ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12556 Test Plan: - New UT - Same stress test command failed before this fix but pass after - CI Reviewed By: ajkr Differential Revision: D56267964 Pulled By: hx235 fbshipit-source-id: af1b7e8769c129f64ba1c7f1ff17102f1239b929
2024-05-21 00:33:43 +00:00
options.avoid_sync_during_shutdown = true;
options.env = env.get();
Reopen(options);
ASSERT_OK(Put("k1", "v1"));
Close();
Reopen(options);
ASSERT_EQ("NOT_FOUND", Get("k1"));
Destroy(options);
options.avoid_sync_during_shutdown = false;
Reopen(options);
ASSERT_OK(Put("k1", "v1"));
Close();
Reopen(options);
ASSERT_EQ("v1", Get("k1"));
Destroy(options);
}
} // namespace ROCKSDB_NAMESPACE
int main(int argc, char** argv) {
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
::testing::InitGoogleTest(&argc, argv);
RegisterCustomObjects(argc, argv);
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
return RUN_ALL_TESTS();
}